common/attr - pub/scm/linux/kernel/git/dgc/xfstests-dev - Git at Google

 ##/bin/bash
 #-----------------------------------------------------------------------
 #  Copyright (c) 2000-2004 Silicon Graphics, Inc.  All Rights Reserved.
 #  This program is free software; you can redistribute it and/or modify
 #  it under the terms of the GNU General Public License as published by
 #  the Free Software Foundation; either version 2 of the License, or
 #  (at your option) any later version.
 #
 #  This program is distributed in the hope that it will be useful,
 #  but WITHOUT ANY WARRANTY; without even the implied warranty of
 #  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 #  GNU General Public License for more details.
 #
 #  You should have received a copy of the GNU General Public License
 #  along with this program; if not, write to the Free Software
 #  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307
 #  USA
 #
 #  Contact information: Silicon Graphics, Inc., 1500 Crittenden Lane,
 #  Mountain View, CA 94043, USA, or: http://www.sgi.com
 #-----------------------------------------------------------------------
 # common extended attribute and ACL support

 # filesystems that want to test maximum supported acl counts need to
 # add support in here
 _acl_get_max()
 {
 	case $FSTYP in
 	xfs)
 		# CRC format filesystems have much larger ACL counts. The actual
 		# number is into the thousands, but testing that meany takes too
 		# long, so just test well past the old limit of 25.
 		xfs_info $TEST_DIR | _filter_mkfs > /dev/null 2> $tmp.info
 		. $tmp.info
 		rm $tmp.info
 		if [ $_fs_has_crcs -eq 0 ]; then
 			echo 25
 		else
 			echo 5461
 		fi
 		;;
 	jfs)
 		echo 8191
 		;;
 	f2fs)
 		_fs_options $TEST_DEV | grep "inline_xattr" >/dev/null 2>&1
 		if [ $? -eq 0 ]; then
 			echo 531
 		else
 			echo 506
 		fi
 		;;
 	*)
 		echo 0
 		;;
 	esac
 }

 _require_acl_get_max()
 {
 	if [ $(_acl_get_max) -eq 0 ]; then
 		_notrun "$FSTYP does not define maximum ACL count"
 	fi
 }

 # pick three unused user/group ids, store them as $acl[1-3]
 #
 _acl_setup_ids()
 {
     eval `(_cat_passwd; _cat_group) | awk -F: '
       { ids[$3]=1 }
       END {
         j=1
         for(i=1; i<1000000 && j<=3;i++){
           if (! (i in ids)) {
 	     printf "acl%d=%d;", j, i;
 	     j++
           }
         }
       }'`
 }

 # filter for the acl ids selected above
 #
 _acl_filter_id()
 {
     sed \
        -e "s/u:$acl1/u:id1/" \
        -e "s/u:$acl2/u:id2/" \
        -e "s/u:$acl3/u:id3/" \
        -e "s/g:$acl1/g:id1/" \
        -e "s/g:$acl2/g:id2/" \
        -e "s/g:$acl3/g:id3/" \
        -e "s/ $acl1 / id1 /" \
        -e "s/ $acl2 / id2 /" \
        -e "s/ $acl3 / id3 /"
 }

 _getfacl_filter_id()
 {
     sed \
        -e "s/user:$acl1/user:id1/" \
        -e "s/user:$acl2/user:id2/" \
        -e "s/user:$acl3/user:id3/" \
        -e "s/group:$acl1/group:id1/" \
        -e "s/group:$acl2/group:id2/" \
        -e "s/group:$acl3/group:id3/" \
        -e "s/: $acl1/: id1/" \
        -e "s/: $acl2/: id2/" \
        -e "s/: $acl3/: id3/"
 }

 # filtered ls
 #
 _acl_ls()
 {
     _ls_l -n $* | awk '{ print $1, $3, $4, $NF }' | _acl_filter_id
 }

 # create an ACL with n ACEs in it
 #
 _create_n_aces()
 {
     let n=$1-4
     acl='u::rwx,g::rwx,o::rwx,m::rwx' # 4 ace acl start
     while [ $n -ne 0 ]; do
 	acl="$acl,u:$n:rwx"
 	let n=$n-1
     done
     echo $acl
 }

 # filter user ace names to user ids
 #
 _filter_aces()
 {
     tmp_file=`mktemp /tmp/ace.XXXXXX`

     (_cat_passwd; _cat_group) > $tmp_file

     $AWK_PROG -v tmpfile=$tmp_file '
 	BEGIN {
 	    FS=":"
 	    while ( getline <tmpfile > 0 ) {
 		idlist[$1] = $3
 	    }
 	}
 	/^user/ { if ($2 in idlist) sub($2, idlist[$2]); print; next}
 	/^u/ { if ($2 in idlist) sub($2, idlist[$2]); print; next}
 	/^default:user/ { if ($3 in idlist) sub($3, idlist[$3]); print; next}
 	{print}
     '
     rm -f $tmp_file
 }

 _filter_aces_notypes()
 {
     tr '\[' '\012' | tr ']' '\012' | tr ',' '\012' | _filter_aces|\
     sed -e 's/u:/user:/' -e 's/g:/group:/' -e 's/o:/other:/' -e 's/m:/mask:/'
 }

 _require_acls()
 {
     [ -n "$CHACL_PROG" ] || _notrun "chacl command not found"

     #
     # Test if chacl is able to list ACLs on the target filesystems.  On really
     # old kernels the system calls might not be implemented at all, but the
     # more common case is that the tested filesystem simply doesn't support
     # ACLs.
     #
     touch $TEST_DIR/syscalltest
     chacl -l $TEST_DIR/syscalltest > $TEST_DIR/syscalltest.out 2>&1
     cat $TEST_DIR/syscalltest.out >> $seqres.full

     if grep -q 'Function not implemented' $TEST_DIR/syscalltest.out; then
       _notrun "kernel does not support ACLs"
     fi
     if grep -q 'Operation not supported' $TEST_DIR/syscalltest.out; then
       _notrun "ACLs not supported by this filesystem type: $FSTYP"
     fi

     rm -f $TEST_DIR/syscalltest.out
 }

 _list_acl()
 {
     file=$1

     ls -dD $file | _acl_filter_id
 }

 _require_attrs()
 {
     [ -n "$ATTR_PROG" ] || _notrun "attr command not found"
     [ -n "$GETFATTR_PROG" ] || _notrun "getfattr command not found"
     [ -n "$SETFATTR_PROG" ] || _notrun "setfattr command not found"

     #
     # Test if chacl is able to write an attribute on the target filesystems.
     # On really old kernels the system calls might not be implemented at all,
     # but the more common case is that the tested filesystem simply doesn't
     # support attributes.  Note that we can't simply list attributes as
     # various security modules generate synthetic attributes not actually
     # stored on disk.
     #
     touch $TEST_DIR/syscalltest
     attr -s "user.xfstests" -V "attr" $TEST_DIR/syscalltest > $TEST_DIR/syscalltest.out 2>&1
     cat $TEST_DIR/syscalltest.out >> $seqres.full

     if grep -q 'Function not implemented' $TEST_DIR/syscalltest.out; then
       _notrun "kernel does not support attrs"
     fi
     if grep -q 'Operation not supported' $TEST_DIR/syscalltest.out; then
       _notrun "attrs not supported by this filesystem type: $FSTYP"
     fi

     rm -f $TEST_DIR/syscalltest.out
 }

 _require_attr_v1()
 {
 	_scratch_mkfs_xfs_supported -i attr=1 >/dev/null 2>&1 \
 		|| _notrun "attr v1 not supported on $SCRATCH_DEV"
 }

 # check if we support the noattr2 mount option
 _require_noattr2()
 {
 	_scratch_mkfs_xfs > /dev/null 2>&1 \
 		|| _fail "_scratch_mkfs_xfs failed on $SCRATCH_DEV"
 	_try_scratch_mount -o noattr2 > /dev/null 2>&1 \
 		|| _notrun "noattr2 mount option not supported on $SCRATCH_DEV"
 	_scratch_unmount
 }

 # getfattr -R returns info in readdir order which varies from fs to fs.
 # This sorts the output by filename
 _sort_getfattr_output()
 {
     awk '{a[FNR]=$0}END{n = asort(a); for(i=1; i <= n; i++) print a[i]"\n"}' RS=''
 }

 # set maximum total attr space based on fs type
 case "$FSTYP" in
 xfs|udf|pvfs2|9p|ceph)
 	MAX_ATTRS=1000
 	;;
 *)
 	# Assume max ~1 block of attrs
 	BLOCK_SIZE=`_get_block_size $TEST_DIR`
 	# user.attribute_XXX="value.XXX" is about 32 bytes; leave some overhead
 	let MAX_ATTRS=$BLOCK_SIZE/40
 esac

 export MAX_ATTRS

 # Set max attr value size based on fs type
 case "$FSTYP" in
 xfs|udf|btrfs)
 	MAX_ATTRVAL_SIZE=64
 	;;
 pvfs2)
 	MAX_ATTRVAL_SIZE=8192
 	;;
 9p|ceph)
 	MAX_ATTRVAL_SIZE=65536
 	;;
 *)
 	# Assume max ~1 block of attrs
 	BLOCK_SIZE=`_get_block_size $TEST_DIR`
 	# leave a little overhead
 	let MAX_ATTRVAL_SIZE=$BLOCK_SIZE-256
 esac

 export MAX_ATTRVAL_SIZE
 # make sure this script returns success
 /bin/true
	##/bin/bash
	#-----------------------------------------------------------------------
	# Copyright (c) 2000-2004 Silicon Graphics, Inc. All Rights Reserved.
	# This program is free software; you can redistribute it and/or modify
	# it under the terms of the GNU General Public License as published by
	# the Free Software Foundation; either version 2 of the License, or
	# (at your option) any later version.
	#
	# This program is distributed in the hope that it will be useful,
	# but WITHOUT ANY WARRANTY; without even the implied warranty of
	# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	# GNU General Public License for more details.
	#
	# You should have received a copy of the GNU General Public License
	# along with this program; if not, write to the Free Software
	# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
	# USA
	#
	# Contact information: Silicon Graphics, Inc., 1500 Crittenden Lane,
	# Mountain View, CA 94043, USA, or: http://www.sgi.com
	#-----------------------------------------------------------------------
	# common extended attribute and ACL support

	# filesystems that want to test maximum supported acl counts need to
	# add support in here
	_acl_get_max()
	{
	case $FSTYP in
	xfs)
	# CRC format filesystems have much larger ACL counts. The actual
	# number is into the thousands, but testing that meany takes too
	# long, so just test well past the old limit of 25.
	xfs_info $TEST_DIR \| _filter_mkfs > /dev/null 2> $tmp.info
	. $tmp.info
	rm $tmp.info
	if [ $_fs_has_crcs -eq 0 ]; then
	echo 25
	else
	echo 5461
	fi
	;;
	jfs)
	echo 8191
	;;
	f2fs)
	_fs_options $TEST_DEV \| grep "inline_xattr" >/dev/null 2>&1
	if [ $? -eq 0 ]; then
	echo 531
	else
	echo 506
	fi
	;;
	*)
	echo 0
	;;
	esac
	}

	_require_acl_get_max()
	{
	if [ $(_acl_get_max) -eq 0 ]; then
	_notrun "$FSTYP does not define maximum ACL count"
	fi
	}

	# pick three unused user/group ids, store them as $acl[1-3]
	#
	_acl_setup_ids()
	{
	eval `(_cat_passwd; _cat_group) \| awk -F: '
	{ ids[$3]=1 }
	END {
	j=1
	for(i=1; i<1000000 && j<=3;i++){
	if (! (i in ids)) {
	printf "acl%d=%d;", j, i;
	j++
	}
	}
	}'`
	}

	# filter for the acl ids selected above
	#
	_acl_filter_id()
	{
	sed \
	-e "s/u:$acl1/u:id1/" \
	-e "s/u:$acl2/u:id2/" \
	-e "s/u:$acl3/u:id3/" \
	-e "s/g:$acl1/g:id1/" \
	-e "s/g:$acl2/g:id2/" \
	-e "s/g:$acl3/g:id3/" \
	-e "s/ $acl1 / id1 /" \
	-e "s/ $acl2 / id2 /" \
	-e "s/ $acl3 / id3 /"
	}

	_getfacl_filter_id()
	{
	sed \
	-e "s/user:$acl1/user:id1/" \
	-e "s/user:$acl2/user:id2/" \
	-e "s/user:$acl3/user:id3/" \
	-e "s/group:$acl1/group:id1/" \
	-e "s/group:$acl2/group:id2/" \
	-e "s/group:$acl3/group:id3/" \
	-e "s/: $acl1/: id1/" \
	-e "s/: $acl2/: id2/" \
	-e "s/: $acl3/: id3/"
	}

	# filtered ls
	#
	_acl_ls()
	{
	_ls_l -n $* \| awk '{ print $1, $3, $4, $NF }' \| _acl_filter_id
	}

	# create an ACL with n ACEs in it
	#
	_create_n_aces()
	{
	let n=$1-4
	acl='u::rwx,g::rwx,o::rwx,m::rwx' # 4 ace acl start
	while [ $n -ne 0 ]; do
	acl="$acl,u:$n:rwx"
	let n=$n-1
	done
	echo $acl
	}

	# filter user ace names to user ids
	#
	_filter_aces()
	{
	tmp_file=`mktemp /tmp/ace.XXXXXX`

	(_cat_passwd; _cat_group) > $tmp_file

	$AWK_PROG -v tmpfile=$tmp_file '
	BEGIN {
	FS=":"
	while ( getline <tmpfile > 0 ) {
	idlist[$1] = $3
	}
	}
	/^user/ { if ($2 in idlist) sub($2, idlist[$2]); print; next}
	/^u/ { if ($2 in idlist) sub($2, idlist[$2]); print; next}
	/^default:user/ { if ($3 in idlist) sub($3, idlist[$3]); print; next}
	{print}
	'
	rm -f $tmp_file
	}

	_filter_aces_notypes()
	{
	tr '\[' '\012' \| tr ']' '\012' \| tr ',' '\012' \| _filter_aces\|\
	sed -e 's/u:/user:/' -e 's/g:/group:/' -e 's/o:/other:/' -e 's/m:/mask:/'
	}

	_require_acls()
	{
	[ -n "$CHACL_PROG" ] \|\| _notrun "chacl command not found"

	#
	# Test if chacl is able to list ACLs on the target filesystems. On really
	# old kernels the system calls might not be implemented at all, but the
	# more common case is that the tested filesystem simply doesn't support
	# ACLs.
	#
	touch $TEST_DIR/syscalltest
	chacl -l $TEST_DIR/syscalltest > $TEST_DIR/syscalltest.out 2>&1
	cat $TEST_DIR/syscalltest.out >> $seqres.full

	if grep -q 'Function not implemented' $TEST_DIR/syscalltest.out; then
	_notrun "kernel does not support ACLs"
	fi
	if grep -q 'Operation not supported' $TEST_DIR/syscalltest.out; then
	_notrun "ACLs not supported by this filesystem type: $FSTYP"
	fi

	rm -f $TEST_DIR/syscalltest.out
	}

	_list_acl()
	{
	file=$1

	ls -dD $file \| _acl_filter_id
	}

	_require_attrs()
	{
	[ -n "$ATTR_PROG" ] \|\| _notrun "attr command not found"
	[ -n "$GETFATTR_PROG" ] \|\| _notrun "getfattr command not found"
	[ -n "$SETFATTR_PROG" ] \|\| _notrun "setfattr command not found"

	#
	# Test if chacl is able to write an attribute on the target filesystems.
	# On really old kernels the system calls might not be implemented at all,
	# but the more common case is that the tested filesystem simply doesn't
	# support attributes. Note that we can't simply list attributes as
	# various security modules generate synthetic attributes not actually
	# stored on disk.
	#
	touch $TEST_DIR/syscalltest
	attr -s "user.xfstests" -V "attr" $TEST_DIR/syscalltest > $TEST_DIR/syscalltest.out 2>&1
	cat $TEST_DIR/syscalltest.out >> $seqres.full

	if grep -q 'Function not implemented' $TEST_DIR/syscalltest.out; then
	_notrun "kernel does not support attrs"
	fi
	if grep -q 'Operation not supported' $TEST_DIR/syscalltest.out; then
	_notrun "attrs not supported by this filesystem type: $FSTYP"
	fi

	rm -f $TEST_DIR/syscalltest.out
	}

	_require_attr_v1()
	{
	_scratch_mkfs_xfs_supported -i attr=1 >/dev/null 2>&1 \
	\|\| _notrun "attr v1 not supported on $SCRATCH_DEV"
	}

	# check if we support the noattr2 mount option
	_require_noattr2()
	{
	_scratch_mkfs_xfs > /dev/null 2>&1 \
	\|\| _fail "_scratch_mkfs_xfs failed on $SCRATCH_DEV"
	_try_scratch_mount -o noattr2 > /dev/null 2>&1 \
	\|\| _notrun "noattr2 mount option not supported on $SCRATCH_DEV"
	_scratch_unmount
	}

	# getfattr -R returns info in readdir order which varies from fs to fs.
	# This sorts the output by filename
	_sort_getfattr_output()
	{
	awk '{a[FNR]=$0}END{n = asort(a); for(i=1; i <= n; i++) print a[i]"\n"}' RS=''
	}

	# set maximum total attr space based on fs type
	case "$FSTYP" in
	xfs\|udf\|pvfs2\|9p\|ceph)
	MAX_ATTRS=1000
	;;
	*)
	# Assume max ~1 block of attrs
	BLOCK_SIZE=`_get_block_size $TEST_DIR`
	# user.attribute_XXX="value.XXX" is about 32 bytes; leave some overhead
	let MAX_ATTRS=$BLOCK_SIZE/40
	esac

	export MAX_ATTRS

	# Set max attr value size based on fs type
	case "$FSTYP" in
	xfs\|udf\|btrfs)
	MAX_ATTRVAL_SIZE=64
	;;
	pvfs2)
	MAX_ATTRVAL_SIZE=8192
	;;
	9p\|ceph)
	MAX_ATTRVAL_SIZE=65536
	;;
	*)
	# Assume max ~1 block of attrs
	BLOCK_SIZE=`_get_block_size $TEST_DIR`
	# leave a little overhead
	let MAX_ATTRVAL_SIZE=$BLOCK_SIZE-256
	esac

	export MAX_ATTRVAL_SIZE
	# make sure this script returns success
	/bin/true