| /* | |
| * arch/arm/mach-kirkwood/d2net_v2-setup.c | |
| * | |
| * LaCie d2 Network Space v2 Board Setup | |
| * | |
| * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/init.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/ata_platform.h> | |
| #include <linux/mv643xx_eth.h> | |
| #include <linux/input.h> | |
| #include <linux/gpio.h> | |
| #include <linux/gpio_keys.h> | |
| #include <linux/leds.h> | |
| #include <asm/mach-types.h> | |
| #include <asm/mach/arch.h> | |
| #include <mach/kirkwood.h> | |
| #include <mach/leds-ns2.h> | |
| #include "common.h" | |
| #include "mpp.h" | |
| #include "lacie_v2-common.h" | |
| /***************************************************************************** | |
| * Ethernet | |
| ****************************************************************************/ | |
| static struct mv643xx_eth_platform_data d2net_v2_ge00_data = { | |
| .phy_addr = MV643XX_ETH_PHY_ADDR(8), | |
| }; | |
| /***************************************************************************** | |
| * SATA | |
| ****************************************************************************/ | |
| static struct mv_sata_platform_data d2net_v2_sata_data = { | |
| .n_ports = 2, | |
| }; | |
| /***************************************************************************** | |
| * GPIO keys | |
| ****************************************************************************/ | |
| #define D2NET_V2_GPIO_PUSH_BUTTON 34 | |
| #define D2NET_V2_GPIO_POWER_SWITCH_ON 13 | |
| #define D2NET_V2_GPIO_POWER_SWITCH_OFF 15 | |
| #define D2NET_V2_SWITCH_POWER_ON 0x1 | |
| #define D2NET_V2_SWITCH_POWER_OFF 0x2 | |
| static struct gpio_keys_button d2net_v2_buttons[] = { | |
| [0] = { | |
| .type = EV_SW, | |
| .code = D2NET_V2_SWITCH_POWER_ON, | |
| .gpio = D2NET_V2_GPIO_POWER_SWITCH_ON, | |
| .desc = "Back power switch (on|auto)", | |
| .active_low = 0, | |
| }, | |
| [1] = { | |
| .type = EV_SW, | |
| .code = D2NET_V2_SWITCH_POWER_OFF, | |
| .gpio = D2NET_V2_GPIO_POWER_SWITCH_OFF, | |
| .desc = "Back power switch (auto|off)", | |
| .active_low = 0, | |
| }, | |
| [2] = { | |
| .code = KEY_POWER, | |
| .gpio = D2NET_V2_GPIO_PUSH_BUTTON, | |
| .desc = "Front Push Button", | |
| .active_low = 1, | |
| }, | |
| }; | |
| static struct gpio_keys_platform_data d2net_v2_button_data = { | |
| .buttons = d2net_v2_buttons, | |
| .nbuttons = ARRAY_SIZE(d2net_v2_buttons), | |
| }; | |
| static struct platform_device d2net_v2_gpio_buttons = { | |
| .name = "gpio-keys", | |
| .id = -1, | |
| .dev = { | |
| .platform_data = &d2net_v2_button_data, | |
| }, | |
| }; | |
| /***************************************************************************** | |
| * GPIO LEDs | |
| ****************************************************************************/ | |
| #define D2NET_V2_GPIO_RED_LED 12 | |
| static struct gpio_led d2net_v2_gpio_led_pins[] = { | |
| { | |
| .name = "d2net_v2:red:fail", | |
| .gpio = D2NET_V2_GPIO_RED_LED, | |
| }, | |
| }; | |
| static struct gpio_led_platform_data d2net_v2_gpio_leds_data = { | |
| .num_leds = ARRAY_SIZE(d2net_v2_gpio_led_pins), | |
| .leds = d2net_v2_gpio_led_pins, | |
| }; | |
| static struct platform_device d2net_v2_gpio_leds = { | |
| .name = "leds-gpio", | |
| .id = -1, | |
| .dev = { | |
| .platform_data = &d2net_v2_gpio_leds_data, | |
| }, | |
| }; | |
| /***************************************************************************** | |
| * Dual-GPIO CPLD LEDs | |
| ****************************************************************************/ | |
| #define D2NET_V2_GPIO_BLUE_LED_SLOW 29 | |
| #define D2NET_V2_GPIO_BLUE_LED_CMD 30 | |
| static struct ns2_led d2net_v2_led_pins[] = { | |
| { | |
| .name = "d2net_v2:blue:sata", | |
| .cmd = D2NET_V2_GPIO_BLUE_LED_CMD, | |
| .slow = D2NET_V2_GPIO_BLUE_LED_SLOW, | |
| }, | |
| }; | |
| static struct ns2_led_platform_data d2net_v2_leds_data = { | |
| .num_leds = ARRAY_SIZE(d2net_v2_led_pins), | |
| .leds = d2net_v2_led_pins, | |
| }; | |
| static struct platform_device d2net_v2_leds = { | |
| .name = "leds-ns2", | |
| .id = -1, | |
| .dev = { | |
| .platform_data = &d2net_v2_leds_data, | |
| }, | |
| }; | |
| /***************************************************************************** | |
| * General Setup | |
| ****************************************************************************/ | |
| static unsigned int d2net_v2_mpp_config[] __initdata = { | |
| MPP0_SPI_SCn, | |
| MPP1_SPI_MOSI, | |
| MPP2_SPI_SCK, | |
| MPP3_SPI_MISO, | |
| MPP6_SYSRST_OUTn, | |
| MPP7_GPO, /* Request power-off */ | |
| MPP8_TW0_SDA, | |
| MPP9_TW0_SCK, | |
| MPP10_UART0_TXD, | |
| MPP11_UART0_RXD, | |
| MPP12_GPO, /* Red led */ | |
| MPP13_GPIO, /* Rear power switch (on|auto) */ | |
| MPP14_GPIO, /* USB fuse */ | |
| MPP15_GPIO, /* Rear power switch (auto|off) */ | |
| MPP16_GPIO, /* SATA 0 power */ | |
| MPP21_SATA0_ACTn, | |
| MPP24_GPIO, /* USB mode select */ | |
| MPP26_GPIO, /* USB device vbus */ | |
| MPP28_GPIO, /* USB enable host vbus */ | |
| MPP29_GPIO, /* Blue led (slow register) */ | |
| MPP30_GPIO, /* Blue led (command register) */ | |
| MPP34_GPIO, /* Power button (1 = Released, 0 = Pushed) */ | |
| MPP35_GPIO, /* Inhibit power-off */ | |
| 0 | |
| }; | |
| #define D2NET_V2_GPIO_POWER_OFF 7 | |
| static void d2net_v2_power_off(void) | |
| { | |
| gpio_set_value(D2NET_V2_GPIO_POWER_OFF, 1); | |
| } | |
| static void __init d2net_v2_init(void) | |
| { | |
| /* | |
| * Basic setup. Needs to be called early. | |
| */ | |
| kirkwood_init(); | |
| kirkwood_mpp_conf(d2net_v2_mpp_config); | |
| lacie_v2_hdd_power_init(1); | |
| kirkwood_ehci_init(); | |
| kirkwood_ge00_init(&d2net_v2_ge00_data); | |
| kirkwood_sata_init(&d2net_v2_sata_data); | |
| kirkwood_uart0_init(); | |
| lacie_v2_register_flash(); | |
| lacie_v2_register_i2c_devices(); | |
| platform_device_register(&d2net_v2_leds); | |
| platform_device_register(&d2net_v2_gpio_leds); | |
| platform_device_register(&d2net_v2_gpio_buttons); | |
| if (gpio_request(D2NET_V2_GPIO_POWER_OFF, "power-off") == 0 && | |
| gpio_direction_output(D2NET_V2_GPIO_POWER_OFF, 0) == 0) | |
| pm_power_off = d2net_v2_power_off; | |
| else | |
| pr_err("d2net_v2: failed to configure power-off GPIO\n"); | |
| } | |
| MACHINE_START(D2NET_V2, "LaCie d2 Network v2") | |
| .atag_offset = 0x100, | |
| .init_machine = d2net_v2_init, | |
| .map_io = kirkwood_map_io, | |
| .init_early = kirkwood_init_early, | |
| .init_irq = kirkwood_init_irq, | |
| .timer = &kirkwood_timer, | |
| .restart = kirkwood_restart, | |
| MACHINE_END |