| /* | |
| * arch/arm/mach-kirkwood/guruplug-setup.c | |
| * | |
| * Marvell GuruPlug Reference Board Setup | |
| * | |
| * This file is licensed under the terms of the GNU General Public | |
| * License version 2. This program is licensed "as is" without any | |
| * warranty of any kind, whether express or implied. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/init.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/mtd/partitions.h> | |
| #include <linux/ata_platform.h> | |
| #include <linux/mv643xx_eth.h> | |
| #include <linux/gpio.h> | |
| #include <linux/leds.h> | |
| #include <asm/mach-types.h> | |
| #include <asm/mach/arch.h> | |
| #include <mach/kirkwood.h> | |
| #include <plat/mvsdio.h> | |
| #include "common.h" | |
| #include "mpp.h" | |
| static struct mtd_partition guruplug_nand_parts[] = { | |
| { | |
| .name = "u-boot", | |
| .offset = 0, | |
| .size = SZ_1M | |
| }, { | |
| .name = "uImage", | |
| .offset = MTDPART_OFS_NXTBLK, | |
| .size = SZ_4M | |
| }, { | |
| .name = "root", | |
| .offset = MTDPART_OFS_NXTBLK, | |
| .size = MTDPART_SIZ_FULL | |
| }, | |
| }; | |
| static struct mv643xx_eth_platform_data guruplug_ge00_data = { | |
| .phy_addr = MV643XX_ETH_PHY_ADDR(0), | |
| }; | |
| static struct mv643xx_eth_platform_data guruplug_ge01_data = { | |
| .phy_addr = MV643XX_ETH_PHY_ADDR(1), | |
| }; | |
| static struct mv_sata_platform_data guruplug_sata_data = { | |
| .n_ports = 1, | |
| }; | |
| static struct mvsdio_platform_data guruplug_mvsdio_data = { | |
| /* unfortunately the CD signal has not been connected */ | |
| }; | |
| static struct gpio_led guruplug_led_pins[] = { | |
| { | |
| .name = "guruplug:red:health", | |
| .gpio = 46, | |
| .active_low = 1, | |
| }, | |
| { | |
| .name = "guruplug:green:health", | |
| .gpio = 47, | |
| .active_low = 1, | |
| }, | |
| { | |
| .name = "guruplug:red:wmode", | |
| .gpio = 48, | |
| .active_low = 1, | |
| }, | |
| { | |
| .name = "guruplug:green:wmode", | |
| .gpio = 49, | |
| .active_low = 1, | |
| }, | |
| }; | |
| static struct gpio_led_platform_data guruplug_led_data = { | |
| .leds = guruplug_led_pins, | |
| .num_leds = ARRAY_SIZE(guruplug_led_pins), | |
| }; | |
| static struct platform_device guruplug_leds = { | |
| .name = "leds-gpio", | |
| .id = -1, | |
| .dev = { | |
| .platform_data = &guruplug_led_data, | |
| } | |
| }; | |
| static unsigned int guruplug_mpp_config[] __initdata = { | |
| MPP46_GPIO, /* M_RLED */ | |
| MPP47_GPIO, /* M_GLED */ | |
| MPP48_GPIO, /* B_RLED */ | |
| MPP49_GPIO, /* B_GLED */ | |
| 0 | |
| }; | |
| static void __init guruplug_init(void) | |
| { | |
| /* | |
| * Basic setup. Needs to be called early. | |
| */ | |
| kirkwood_init(); | |
| kirkwood_mpp_conf(guruplug_mpp_config); | |
| kirkwood_uart0_init(); | |
| kirkwood_nand_init(ARRAY_AND_SIZE(guruplug_nand_parts), 25); | |
| kirkwood_ehci_init(); | |
| kirkwood_ge00_init(&guruplug_ge00_data); | |
| kirkwood_ge01_init(&guruplug_ge01_data); | |
| kirkwood_sata_init(&guruplug_sata_data); | |
| kirkwood_sdio_init(&guruplug_mvsdio_data); | |
| platform_device_register(&guruplug_leds); | |
| } | |
| MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board") | |
| /* Maintainer: Siddarth Gore <gores@marvell.com> */ | |
| .atag_offset = 0x100, | |
| .init_machine = guruplug_init, | |
| .map_io = kirkwood_map_io, | |
| .init_early = kirkwood_init_early, | |
| .init_irq = kirkwood_init_irq, | |
| .timer = &kirkwood_timer, | |
| .restart = kirkwood_restart, | |
| MACHINE_END |