| /* | |
| * arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c | |
| * | |
| * Marvell 88F6281 GTW GE Board Setup | |
| * | |
| * This file is licensed under the terms of the GNU General Public | |
| * License version 2. This program is licensed "as is" without any | |
| * warranty of any kind, whether express or implied. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/init.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/pci.h> | |
| #include <linux/irq.h> | |
| #include <linux/mtd/physmap.h> | |
| #include <linux/timer.h> | |
| #include <linux/mv643xx_eth.h> | |
| #include <linux/ethtool.h> | |
| #include <linux/gpio.h> | |
| #include <linux/leds.h> | |
| #include <linux/input.h> | |
| #include <linux/gpio_keys.h> | |
| #include <linux/spi/flash.h> | |
| #include <linux/spi/spi.h> | |
| #include <linux/spi/orion_spi.h> | |
| #include <net/dsa.h> | |
| #include <asm/mach-types.h> | |
| #include <asm/mach/arch.h> | |
| #include <asm/mach/pci.h> | |
| #include <mach/kirkwood.h> | |
| #include "common.h" | |
| #include "mpp.h" | |
| static struct mv643xx_eth_platform_data mv88f6281gtw_ge_ge00_data = { | |
| .phy_addr = MV643XX_ETH_PHY_NONE, | |
| .speed = SPEED_1000, | |
| .duplex = DUPLEX_FULL, | |
| }; | |
| static struct dsa_chip_data mv88f6281gtw_ge_switch_chip_data = { | |
| .port_names[0] = "lan1", | |
| .port_names[1] = "lan2", | |
| .port_names[2] = "lan3", | |
| .port_names[3] = "lan4", | |
| .port_names[4] = "wan", | |
| .port_names[5] = "cpu", | |
| }; | |
| static struct dsa_platform_data mv88f6281gtw_ge_switch_plat_data = { | |
| .nr_chips = 1, | |
| .chip = &mv88f6281gtw_ge_switch_chip_data, | |
| }; | |
| static const struct flash_platform_data mv88f6281gtw_ge_spi_slave_data = { | |
| .type = "mx25l12805d", | |
| }; | |
| static struct spi_board_info __initdata mv88f6281gtw_ge_spi_slave_info[] = { | |
| { | |
| .modalias = "m25p80", | |
| .platform_data = &mv88f6281gtw_ge_spi_slave_data, | |
| .irq = -1, | |
| .max_speed_hz = 50000000, | |
| .bus_num = 0, | |
| .chip_select = 0, | |
| }, | |
| }; | |
| static struct gpio_keys_button mv88f6281gtw_ge_button_pins[] = { | |
| { | |
| .code = KEY_RESTART, | |
| .gpio = 47, | |
| .desc = "SWR Button", | |
| .active_low = 1, | |
| }, { | |
| .code = KEY_WPS_BUTTON, | |
| .gpio = 46, | |
| .desc = "WPS Button", | |
| .active_low = 1, | |
| }, | |
| }; | |
| static struct gpio_keys_platform_data mv88f6281gtw_ge_button_data = { | |
| .buttons = mv88f6281gtw_ge_button_pins, | |
| .nbuttons = ARRAY_SIZE(mv88f6281gtw_ge_button_pins), | |
| }; | |
| static struct platform_device mv88f6281gtw_ge_buttons = { | |
| .name = "gpio-keys", | |
| .id = -1, | |
| .num_resources = 0, | |
| .dev = { | |
| .platform_data = &mv88f6281gtw_ge_button_data, | |
| }, | |
| }; | |
| static struct gpio_led mv88f6281gtw_ge_led_pins[] = { | |
| { | |
| .name = "gtw:green:Status", | |
| .gpio = 20, | |
| .active_low = 0, | |
| }, { | |
| .name = "gtw:red:Status", | |
| .gpio = 21, | |
| .active_low = 0, | |
| }, { | |
| .name = "gtw:green:USB", | |
| .gpio = 12, | |
| .active_low = 0, | |
| }, | |
| }; | |
| static struct gpio_led_platform_data mv88f6281gtw_ge_led_data = { | |
| .leds = mv88f6281gtw_ge_led_pins, | |
| .num_leds = ARRAY_SIZE(mv88f6281gtw_ge_led_pins), | |
| }; | |
| static struct platform_device mv88f6281gtw_ge_leds = { | |
| .name = "leds-gpio", | |
| .id = -1, | |
| .dev = { | |
| .platform_data = &mv88f6281gtw_ge_led_data, | |
| }, | |
| }; | |
| static unsigned int mv88f6281gtw_ge_mpp_config[] __initdata = { | |
| MPP12_GPO, /* Status#_USB pin */ | |
| MPP20_GPIO, /* Status#_GLED pin */ | |
| MPP21_GPIO, /* Status#_RLED pin */ | |
| MPP46_GPIO, /* WPS_Switch pin */ | |
| MPP47_GPIO, /* SW_Init pin */ | |
| 0 | |
| }; | |
| static void __init mv88f6281gtw_ge_init(void) | |
| { | |
| /* | |
| * Basic setup. Needs to be called early. | |
| */ | |
| kirkwood_init(); | |
| kirkwood_mpp_conf(mv88f6281gtw_ge_mpp_config); | |
| kirkwood_ehci_init(); | |
| kirkwood_ge00_init(&mv88f6281gtw_ge_ge00_data); | |
| kirkwood_ge00_switch_init(&mv88f6281gtw_ge_switch_plat_data, NO_IRQ); | |
| spi_register_board_info(mv88f6281gtw_ge_spi_slave_info, | |
| ARRAY_SIZE(mv88f6281gtw_ge_spi_slave_info)); | |
| kirkwood_spi_init(); | |
| kirkwood_uart0_init(); | |
| platform_device_register(&mv88f6281gtw_ge_leds); | |
| platform_device_register(&mv88f6281gtw_ge_buttons); | |
| } | |
| static int __init mv88f6281gtw_ge_pci_init(void) | |
| { | |
| if (machine_is_mv88f6281gtw_ge()) | |
| kirkwood_pcie_init(KW_PCIE0); | |
| return 0; | |
| } | |
| subsys_initcall(mv88f6281gtw_ge_pci_init); | |
| MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board") | |
| /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */ | |
| .atag_offset = 0x100, | |
| .init_machine = mv88f6281gtw_ge_init, | |
| .map_io = kirkwood_map_io, | |
| .init_early = kirkwood_init_early, | |
| .init_irq = kirkwood_init_irq, | |
| .timer = &kirkwood_timer, | |
| .restart = kirkwood_restart, | |
| MACHINE_END |