| /* | |
| * | |
| * HP t5325 Thin Client setup | |
| * | |
| * Copyright (C) 2010 Martin Michlmayr <tbm@cyrius.com> | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * as published by the Free Software Foundation; either version | |
| * 2 of the License, or (at your option) any later version. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/init.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/mtd/physmap.h> | |
| #include <linux/spi/flash.h> | |
| #include <linux/spi/spi.h> | |
| #include <linux/spi/orion_spi.h> | |
| #include <linux/i2c.h> | |
| #include <linux/mv643xx_eth.h> | |
| #include <linux/ata_platform.h> | |
| #include <linux/gpio.h> | |
| #include <linux/gpio_keys.h> | |
| #include <linux/input.h> | |
| #include <sound/alc5623.h> | |
| #include <asm/mach-types.h> | |
| #include <asm/mach/arch.h> | |
| #include <mach/kirkwood.h> | |
| #include "common.h" | |
| #include "mpp.h" | |
| struct mtd_partition hp_t5325_partitions[] = { | |
| { | |
| .name = "u-boot env", | |
| .size = SZ_64K, | |
| .offset = SZ_512K + SZ_256K, | |
| }, | |
| { | |
| .name = "permanent u-boot env", | |
| .size = SZ_64K, | |
| .offset = MTDPART_OFS_APPEND, | |
| .mask_flags = MTD_WRITEABLE, | |
| }, | |
| { | |
| .name = "HP env", | |
| .size = SZ_64K, | |
| .offset = MTDPART_OFS_APPEND, | |
| }, | |
| { | |
| .name = "u-boot", | |
| .size = SZ_512K, | |
| .offset = 0, | |
| .mask_flags = MTD_WRITEABLE, | |
| }, | |
| { | |
| .name = "SSD firmware", | |
| .size = SZ_256K, | |
| .offset = SZ_512K, | |
| }, | |
| }; | |
| const struct flash_platform_data hp_t5325_flash = { | |
| .type = "mx25l8005", | |
| .name = "spi_flash", | |
| .parts = hp_t5325_partitions, | |
| .nr_parts = ARRAY_SIZE(hp_t5325_partitions), | |
| }; | |
| struct spi_board_info __initdata hp_t5325_spi_slave_info[] = { | |
| { | |
| .modalias = "m25p80", | |
| .platform_data = &hp_t5325_flash, | |
| .irq = -1, | |
| }, | |
| }; | |
| static struct mv643xx_eth_platform_data hp_t5325_ge00_data = { | |
| .phy_addr = MV643XX_ETH_PHY_ADDR(8), | |
| }; | |
| static struct mv_sata_platform_data hp_t5325_sata_data = { | |
| .n_ports = 2, | |
| }; | |
| static struct gpio_keys_button hp_t5325_buttons[] = { | |
| { | |
| .code = KEY_POWER, | |
| .gpio = 45, | |
| .desc = "Power", | |
| .active_low = 1, | |
| }, | |
| }; | |
| static struct gpio_keys_platform_data hp_t5325_button_data = { | |
| .buttons = hp_t5325_buttons, | |
| .nbuttons = ARRAY_SIZE(hp_t5325_buttons), | |
| }; | |
| static struct platform_device hp_t5325_button_device = { | |
| .name = "gpio-keys", | |
| .id = -1, | |
| .num_resources = 0, | |
| .dev = { | |
| .platform_data = &hp_t5325_button_data, | |
| } | |
| }; | |
| static unsigned int hp_t5325_mpp_config[] __initdata = { | |
| MPP0_NF_IO2, | |
| MPP1_SPI_MOSI, | |
| MPP2_SPI_SCK, | |
| MPP3_SPI_MISO, | |
| MPP4_NF_IO6, | |
| MPP5_NF_IO7, | |
| MPP6_SYSRST_OUTn, | |
| MPP7_SPI_SCn, | |
| MPP8_TW0_SDA, | |
| MPP9_TW0_SCK, | |
| MPP10_UART0_TXD, | |
| MPP11_UART0_RXD, | |
| MPP12_SD_CLK, | |
| MPP13_GPIO, | |
| MPP14_GPIO, | |
| MPP15_GPIO, | |
| MPP16_GPIO, | |
| MPP17_GPIO, | |
| MPP18_NF_IO0, | |
| MPP19_NF_IO1, | |
| MPP20_GPIO, | |
| MPP21_GPIO, | |
| MPP22_GPIO, | |
| MPP23_GPIO, | |
| MPP32_GPIO, | |
| MPP33_GE1_TXCTL, | |
| MPP39_AU_I2SBCLK, | |
| MPP40_AU_I2SDO, | |
| MPP43_AU_I2SDI, | |
| MPP41_AU_I2SLRCLK, | |
| MPP42_AU_I2SMCLK, | |
| MPP45_GPIO, /* Power button */ | |
| MPP48_GPIO, /* Board power off */ | |
| 0 | |
| }; | |
| static struct alc5623_platform_data alc5621_data = { | |
| .add_ctrl = 0x3700, | |
| .jack_det_ctrl = 0x4810, | |
| }; | |
| static struct i2c_board_info i2c_board_info[] __initdata = { | |
| { | |
| I2C_BOARD_INFO("alc5621", 0x1a), | |
| .platform_data = &alc5621_data, | |
| }, | |
| }; | |
| #define HP_T5325_GPIO_POWER_OFF 48 | |
| static void hp_t5325_power_off(void) | |
| { | |
| gpio_set_value(HP_T5325_GPIO_POWER_OFF, 1); | |
| } | |
| static void __init hp_t5325_init(void) | |
| { | |
| /* | |
| * Basic setup. Needs to be called early. | |
| */ | |
| kirkwood_init(); | |
| kirkwood_mpp_conf(hp_t5325_mpp_config); | |
| kirkwood_uart0_init(); | |
| spi_register_board_info(hp_t5325_spi_slave_info, | |
| ARRAY_SIZE(hp_t5325_spi_slave_info)); | |
| kirkwood_spi_init(); | |
| kirkwood_i2c_init(); | |
| kirkwood_ge00_init(&hp_t5325_ge00_data); | |
| kirkwood_sata_init(&hp_t5325_sata_data); | |
| kirkwood_ehci_init(); | |
| platform_device_register(&hp_t5325_button_device); | |
| i2c_register_board_info(0, i2c_board_info, ARRAY_SIZE(i2c_board_info)); | |
| kirkwood_audio_init(); | |
| if (gpio_request(HP_T5325_GPIO_POWER_OFF, "power-off") == 0 && | |
| gpio_direction_output(HP_T5325_GPIO_POWER_OFF, 0) == 0) | |
| pm_power_off = hp_t5325_power_off; | |
| else | |
| pr_err("t5325: failed to configure power-off GPIO\n"); | |
| } | |
| static int __init hp_t5325_pci_init(void) | |
| { | |
| if (machine_is_t5325()) | |
| kirkwood_pcie_init(KW_PCIE0); | |
| return 0; | |
| } | |
| subsys_initcall(hp_t5325_pci_init); | |
| MACHINE_START(T5325, "HP t5325 Thin Client") | |
| /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */ | |
| .atag_offset = 0x100, | |
| .init_machine = hp_t5325_init, | |
| .map_io = kirkwood_map_io, | |
| .init_early = kirkwood_init_early, | |
| .init_irq = kirkwood_init_irq, | |
| .timer = &kirkwood_timer, | |
| .restart = kirkwood_restart, | |
| MACHINE_END |