Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull ARM kallsyms fix from Rusty Russell:
"Last minute perf unbreakage for ARM modules; spent a day in
linux-next"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
scripts/kallsyms: filter symbols not in kernel address space
diff --git a/MAINTAINERS b/MAINTAINERS
index 3438384..ffcaf97 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8917,61 +8917,14 @@
S: Maintained
F: drivers/net/usb/rtl8150.c
-USB SERIAL BELKIN F5U103 DRIVER
-M: William Greathouse <wgreathouse@smva.com>
+USB SERIAL SUBSYSTEM
+M: Johan Hovold <jhovold@gmail.com>
L: linux-usb@vger.kernel.org
S: Maintained
-F: drivers/usb/serial/belkin_sa.*
-
-USB SERIAL CYPRESS M8 DRIVER
-M: Lonnie Mendez <dignome@gmail.com>
-L: linux-usb@vger.kernel.org
-S: Maintained
-W: http://geocities.com/i0xox0i
-W: http://firstlight.net/cvs
-F: drivers/usb/serial/cypress_m8.*
-
-USB SERIAL CYBERJACK DRIVER
-M: Matthias Bruestle and Harald Welte <support@reiner-sct.com>
-W: http://www.reiner-sct.de/support/treiber_cyberjack.php
-S: Maintained
-F: drivers/usb/serial/cyberjack.c
-
-USB SERIAL DIGI ACCELEPORT DRIVER
-M: Peter Berger <pberger@brimson.com>
-M: Al Borchers <alborchers@steinerpoint.com>
-L: linux-usb@vger.kernel.org
-S: Maintained
-F: drivers/usb/serial/digi_acceleport.c
-
-USB SERIAL DRIVER
-M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-L: linux-usb@vger.kernel.org
-S: Supported
F: Documentation/usb/usb-serial.txt
-F: drivers/usb/serial/generic.c
-F: drivers/usb/serial/usb-serial.c
+F: drivers/usb/serial/
F: include/linux/usb/serial.h
-USB SERIAL EMPEG EMPEG-CAR MARK I/II DRIVER
-M: Gary Brubaker <xavyer@ix.netcom.com>
-L: linux-usb@vger.kernel.org
-S: Maintained
-F: drivers/usb/serial/empeg.c
-
-USB SERIAL KEYSPAN DRIVER
-M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-L: linux-usb@vger.kernel.org
-S: Maintained
-F: drivers/usb/serial/*keyspan*
-
-USB SERIAL WHITEHEAT DRIVER
-M: Support Department <support@connecttech.com>
-L: linux-usb@vger.kernel.org
-W: http://www.connecttech.com
-S: Supported
-F: drivers/usb/serial/whiteheat*
-
USB SMSC75XX ETHERNET DRIVER
M: Steve Glendinning <steve.glendinning@shawell.net>
L: netdev@vger.kernel.org
diff --git a/arch/arc/mm/fault.c b/arch/arc/mm/fault.c
index d63f3de..0c14d8a 100644
--- a/arch/arc/mm/fault.c
+++ b/arch/arc/mm/fault.c
@@ -17,7 +17,7 @@
#include <asm/pgalloc.h>
#include <asm/mmu.h>
-static int handle_vmalloc_fault(struct mm_struct *mm, unsigned long address)
+static int handle_vmalloc_fault(unsigned long address)
{
/*
* Synchronize this task's top level page-table
@@ -27,7 +27,7 @@
pud_t *pud, *pud_k;
pmd_t *pmd, *pmd_k;
- pgd = pgd_offset_fast(mm, address);
+ pgd = pgd_offset_fast(current->active_mm, address);
pgd_k = pgd_offset_k(address);
if (!pgd_present(*pgd_k))
@@ -72,7 +72,7 @@
* nothing more.
*/
if (address >= VMALLOC_START && address <= VMALLOC_END) {
- ret = handle_vmalloc_fault(mm, address);
+ ret = handle_vmalloc_fault(address);
if (unlikely(ret))
goto bad_area_nosemaphore;
else
diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c
index 9d84491..8a87a32 100644
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -1276,16 +1276,16 @@
static int __kprobes
perf_event_nmi_handler(unsigned int cmd, struct pt_regs *regs)
{
- int ret;
u64 start_clock;
u64 finish_clock;
+ int ret;
if (!atomic_read(&active_events))
return NMI_DONE;
- start_clock = local_clock();
+ start_clock = sched_clock();
ret = x86_pmu.handle_irq(regs);
- finish_clock = local_clock();
+ finish_clock = sched_clock();
perf_sample_event_took(finish_clock - start_clock);
diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c
index ba77ebc..6fcb49c 100644
--- a/arch/x86/kernel/nmi.c
+++ b/arch/x86/kernel/nmi.c
@@ -113,10 +113,10 @@
u64 before, delta, whole_msecs;
int remainder_ns, decimal_msecs, thishandled;
- before = local_clock();
+ before = sched_clock();
thishandled = a->handler(type, regs);
handled += thishandled;
- delta = local_clock() - before;
+ delta = sched_clock() - before;
trace_nmi_handler(a->handler, (int)delta, thishandled);
if (delta < nmi_longest_ns)
diff --git a/drivers/clk/clk-nomadik.c b/drivers/clk/clk-nomadik.c
index 51410c2..4d978a3 100644
--- a/drivers/clk/clk-nomadik.c
+++ b/drivers/clk/clk-nomadik.c
@@ -27,6 +27,14 @@
*/
#define SRC_CR 0x00U
+#define SRC_CR_T0_ENSEL BIT(15)
+#define SRC_CR_T1_ENSEL BIT(17)
+#define SRC_CR_T2_ENSEL BIT(19)
+#define SRC_CR_T3_ENSEL BIT(21)
+#define SRC_CR_T4_ENSEL BIT(23)
+#define SRC_CR_T5_ENSEL BIT(25)
+#define SRC_CR_T6_ENSEL BIT(27)
+#define SRC_CR_T7_ENSEL BIT(29)
#define SRC_XTALCR 0x0CU
#define SRC_XTALCR_XTALTIMEN BIT(20)
#define SRC_XTALCR_SXTALDIS BIT(19)
@@ -543,6 +551,19 @@
__func__, np->name);
return;
}
+
+ /* Set all timers to use the 2.4 MHz TIMCLK */
+ val = readl(src_base + SRC_CR);
+ val |= SRC_CR_T0_ENSEL;
+ val |= SRC_CR_T1_ENSEL;
+ val |= SRC_CR_T2_ENSEL;
+ val |= SRC_CR_T3_ENSEL;
+ val |= SRC_CR_T4_ENSEL;
+ val |= SRC_CR_T5_ENSEL;
+ val |= SRC_CR_T6_ENSEL;
+ val |= SRC_CR_T7_ENSEL;
+ writel(val, src_base + SRC_CR);
+
val = readl(src_base + SRC_XTALCR);
pr_info("SXTALO is %s\n",
(val & SRC_XTALCR_SXTALDIS) ? "disabled" : "enabled");
diff --git a/drivers/clk/mvebu/armada-370.c b/drivers/clk/mvebu/armada-370.c
index fc777bd..81a202d 100644
--- a/drivers/clk/mvebu/armada-370.c
+++ b/drivers/clk/mvebu/armada-370.c
@@ -39,8 +39,8 @@
};
static const u32 a370_tclk_freqs[] __initconst = {
- 16600000,
- 20000000,
+ 166000000,
+ 200000000,
};
static u32 __init a370_get_tclk_freq(void __iomem *sar)
diff --git a/drivers/clk/socfpga/clk.c b/drivers/clk/socfpga/clk.c
index 5bb848c..81dd31a 100644
--- a/drivers/clk/socfpga/clk.c
+++ b/drivers/clk/socfpga/clk.c
@@ -49,7 +49,7 @@
#define SOCFPGA_L4_SP_CLK "l4_sp_clk"
#define SOCFPGA_NAND_CLK "nand_clk"
#define SOCFPGA_NAND_X_CLK "nand_x_clk"
-#define SOCFPGA_MMC_CLK "mmc_clk"
+#define SOCFPGA_MMC_CLK "sdmmc_clk"
#define SOCFPGA_DB_CLK "gpio_db_clk"
#define div_mask(width) ((1 << (width)) - 1)
diff --git a/drivers/clk/versatile/clk-icst.c b/drivers/clk/versatile/clk-icst.c
index 67ccf4a..f5e4c21 100644
--- a/drivers/clk/versatile/clk-icst.c
+++ b/drivers/clk/versatile/clk-icst.c
@@ -107,7 +107,7 @@
vco = icst_hz_to_vco(icst->params, rate);
icst->rate = icst_hz(icst->params, vco);
- vco_set(icst->vcoreg, icst->lockreg, vco);
+ vco_set(icst->lockreg, icst->vcoreg, vco);
return 0;
}
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index db59bb9..10d1de5 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -107,8 +107,6 @@
static void intel_crt_get_config(struct intel_encoder *encoder,
struct intel_crtc_config *pipe_config)
{
- struct drm_device *dev = encoder->base.dev;
-
pipe_config->adjusted_mode.flags |= intel_crt_get_flags(encoder);
}
diff --git a/drivers/gpu/drm/radeon/evergreen_hdmi.c b/drivers/gpu/drm/radeon/evergreen_hdmi.c
index fe1de85..57fcc4b 100644
--- a/drivers/gpu/drm/radeon/evergreen_hdmi.c
+++ b/drivers/gpu/drm/radeon/evergreen_hdmi.c
@@ -291,6 +291,7 @@
/* fglrx clears sth in AFMT_AUDIO_PACKET_CONTROL2 here */
WREG32(HDMI_ACR_PACKET_CONTROL + offset,
+ HDMI_ACR_SOURCE | /* select SW CTS value */
HDMI_ACR_AUTO_SEND); /* allow hw to sent ACR packets when required */
evergreen_hdmi_update_ACR(encoder, mode->clock);
diff --git a/drivers/gpu/drm/radeon/kv_dpm.c b/drivers/gpu/drm/radeon/kv_dpm.c
index 7139906..b419055 100644
--- a/drivers/gpu/drm/radeon/kv_dpm.c
+++ b/drivers/gpu/drm/radeon/kv_dpm.c
@@ -2635,7 +2635,7 @@
pi->caps_sclk_ds = true;
pi->enable_auto_thermal_throttling = true;
pi->disable_nb_ps3_in_battery = false;
- pi->bapm_enable = true;
+ pi->bapm_enable = false;
pi->voltage_drop_t = 0;
pi->caps_sclk_throttle_low_notification = false;
pi->caps_fps = false; /* true? */
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index a400ac1..24f4960 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -1272,8 +1272,8 @@
struct radeon_clock_and_voltage_limits {
u32 sclk;
u32 mclk;
- u32 vddc;
- u32 vddci;
+ u16 vddc;
+ u16 vddci;
};
struct radeon_clock_array {
diff --git a/drivers/input/input.c b/drivers/input/input.c
index c044699..e75d015 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -1734,6 +1734,7 @@
*/
struct input_dev *input_allocate_device(void)
{
+ static atomic_t input_no = ATOMIC_INIT(0);
struct input_dev *dev;
dev = kzalloc(sizeof(struct input_dev), GFP_KERNEL);
@@ -1743,9 +1744,13 @@
device_initialize(&dev->dev);
mutex_init(&dev->mutex);
spin_lock_init(&dev->event_lock);
+ init_timer(&dev->timer);
INIT_LIST_HEAD(&dev->h_list);
INIT_LIST_HEAD(&dev->node);
+ dev_set_name(&dev->dev, "input%ld",
+ (unsigned long) atomic_inc_return(&input_no) - 1);
+
__module_get(THIS_MODULE);
}
@@ -2019,7 +2024,6 @@
*/
int input_register_device(struct input_dev *dev)
{
- static atomic_t input_no = ATOMIC_INIT(0);
struct input_devres *devres = NULL;
struct input_handler *handler;
unsigned int packet_size;
@@ -2059,7 +2063,6 @@
* If delay and period are pre-set by the driver, then autorepeating
* is handled by the driver itself and we don't do it in input.c.
*/
- init_timer(&dev->timer);
if (!dev->rep[REP_DELAY] && !dev->rep[REP_PERIOD]) {
dev->timer.data = (long) dev;
dev->timer.function = input_repeat_key;
@@ -2073,9 +2076,6 @@
if (!dev->setkeycode)
dev->setkeycode = input_default_setkeycode;
- dev_set_name(&dev->dev, "input%ld",
- (unsigned long) atomic_inc_return(&input_no) - 1);
-
error = device_add(&dev->dev);
if (error)
goto err_free_vals;
diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c
index 134c3b4..a2e758d 100644
--- a/drivers/input/keyboard/pxa27x_keypad.c
+++ b/drivers/input/keyboard/pxa27x_keypad.c
@@ -786,10 +786,17 @@
input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
input_set_capability(input_dev, EV_MSC, MSC_SCAN);
- if (pdata)
+ if (pdata) {
error = pxa27x_keypad_build_keycode(keypad);
- else
+ } else {
error = pxa27x_keypad_build_keycode_from_dt(keypad);
+ /*
+ * Data that we get from DT resides in dynamically
+ * allocated memory so we need to update our pdata
+ * pointer.
+ */
+ pdata = keypad->pdata;
+ }
if (error) {
dev_err(&pdev->dev, "failed to build keycode\n");
goto failed_put_clk;
diff --git a/drivers/input/misc/cm109.c b/drivers/input/misc/cm109.c
index 082684e..9365535 100644
--- a/drivers/input/misc/cm109.c
+++ b/drivers/input/misc/cm109.c
@@ -351,7 +351,9 @@
if (status) {
if (status == -ESHUTDOWN)
return;
- dev_err(&dev->intf->dev, "%s: urb status %d\n", __func__, status);
+ dev_err_ratelimited(&dev->intf->dev, "%s: urb status %d\n",
+ __func__, status);
+ goto out;
}
/* Special keys */
@@ -418,8 +420,12 @@
dev->ctl_data->byte[2],
dev->ctl_data->byte[3]);
- if (status)
- dev_err(&dev->intf->dev, "%s: urb status %d\n", __func__, status);
+ if (status) {
+ if (status == -ESHUTDOWN)
+ return;
+ dev_err_ratelimited(&dev->intf->dev, "%s: urb status %d\n",
+ __func__, status);
+ }
spin_lock(&dev->ctl_submit_lock);
@@ -427,7 +433,7 @@
if (likely(!dev->shutdown)) {
- if (dev->buzzer_pending) {
+ if (dev->buzzer_pending || status) {
dev->buzzer_pending = 0;
dev->ctl_urb_pending = 1;
cm109_submit_buzz_toggle(dev);
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index 7c5d72a..8365847 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -103,6 +103,7 @@
/* Dell Latitude E5500, E6400, E6500, Precision M4400 */
{ { 0x62, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xcf, 0xcf,
ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED },
+ { { 0x73, 0x00, 0x14 }, 0x00, ALPS_PROTO_V2, 0xcf, 0xcf, ALPS_DUALPOINT }, /* Dell XT2 */
{ { 0x73, 0x02, 0x50 }, 0x00, ALPS_PROTO_V2, 0xcf, 0xcf, ALPS_FOUR_BUTTONS }, /* Dell Vostro 1400 */
{ { 0x52, 0x01, 0x14 }, 0x00, ALPS_PROTO_V2, 0xff, 0xff,
ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED }, /* Toshiba Tecra A11-11L */
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 78e4de4..52c9ebf 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -223,21 +223,26 @@
{
unsigned long flags;
unsigned char data, str;
- int i = 0;
+ int count = 0;
+ int retval = 0;
spin_lock_irqsave(&i8042_lock, flags);
- while (((str = i8042_read_status()) & I8042_STR_OBF) && (i < I8042_BUFFER_SIZE)) {
- udelay(50);
- data = i8042_read_data();
- i++;
- dbg("%02x <- i8042 (flush, %s)\n",
- data, str & I8042_STR_AUXDATA ? "aux" : "kbd");
+ while ((str = i8042_read_status()) & I8042_STR_OBF) {
+ if (count++ < I8042_BUFFER_SIZE) {
+ udelay(50);
+ data = i8042_read_data();
+ dbg("%02x <- i8042 (flush, %s)\n",
+ data, str & I8042_STR_AUXDATA ? "aux" : "kbd");
+ } else {
+ retval = -EIO;
+ break;
+ }
}
spin_unlock_irqrestore(&i8042_lock, flags);
- return i;
+ return retval;
}
/*
@@ -849,7 +854,7 @@
static int i8042_controller_check(void)
{
- if (i8042_flush() == I8042_BUFFER_SIZE) {
+ if (i8042_flush()) {
pr_err("No controller found\n");
return -ENODEV;
}
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index 79b69ea..e53416a 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -1031,6 +1031,7 @@
}
static enum power_supply_property wacom_battery_props[] = {
+ POWER_SUPPLY_PROP_SCOPE,
POWER_SUPPLY_PROP_CAPACITY
};
@@ -1042,6 +1043,9 @@
int ret = 0;
switch (psp) {
+ case POWER_SUPPLY_PROP_SCOPE:
+ val->intval = POWER_SUPPLY_SCOPE_DEVICE;
+ break;
case POWER_SUPPLY_PROP_CAPACITY:
val->intval =
wacom->wacom_wac.battery_capacity * 100 / 31;
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index b2aa503..c59b797 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -2054,6 +2054,12 @@
static const struct wacom_features wacom_features_0x10D =
{ "Wacom ISDv4 10D", WACOM_PKGLEN_MTTPC, 26202, 16325, 255,
0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0x10E =
+ { "Wacom ISDv4 10E", WACOM_PKGLEN_MTTPC, 27760, 15694, 255,
+ 0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0x10F =
+ { "Wacom ISDv4 10F", WACOM_PKGLEN_MTTPC, 27760, 15694, 255,
+ 0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x4001 =
{ "Wacom ISDv4 4001", WACOM_PKGLEN_MTTPC, 26202, 16325, 255,
0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
@@ -2248,6 +2254,8 @@
{ USB_DEVICE_WACOM(0x100) },
{ USB_DEVICE_WACOM(0x101) },
{ USB_DEVICE_WACOM(0x10D) },
+ { USB_DEVICE_WACOM(0x10E) },
+ { USB_DEVICE_WACOM(0x10F) },
{ USB_DEVICE_WACOM(0x300) },
{ USB_DEVICE_WACOM(0x301) },
{ USB_DEVICE_WACOM(0x304) },
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index be12fbf..1ea7523 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -552,9 +552,8 @@
struct acpiphp_func *func;
int max, pass;
LIST_HEAD(add_list);
- int nr_found;
- nr_found = acpiphp_rescan_slot(slot);
+ acpiphp_rescan_slot(slot);
max = acpiphp_max_busnr(bus);
for (pass = 0; pass < 2; pass++) {
list_for_each_entry(dev, &bus->devices, bus_list) {
@@ -574,9 +573,6 @@
}
}
__pci_bus_assign_resources(bus, &add_list, NULL);
- /* Nothing more to do here if there are no new devices on this bus. */
- if (!nr_found && (slot->flags & SLOT_ENABLED))
- return;
acpiphp_sanitize_bus(bus);
acpiphp_set_hpp_values(bus);
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index c45f9c0..b21d553 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -904,6 +904,7 @@
{ USB_DEVICE(FTDI_VID, FTDI_LUMEL_PD12_PID) },
/* Crucible Devices */
{ USB_DEVICE(FTDI_VID, FTDI_CT_COMET_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_Z3X_PID) },
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 1b8af46..a7019d1 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -1307,3 +1307,9 @@
* Manufacturer: Crucible Technologies
*/
#define FTDI_CT_COMET_PID 0x8e08
+
+/*
+ * Product: Z3X Box
+ * Manufacturer: Smart GSM Team
+ */
+#define FTDI_Z3X_PID 0x0011
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index bedf8e4..1e6de4c 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -4,11 +4,6 @@
* Copyright (C) 2001-2007 Greg Kroah-Hartman (greg@kroah.com)
* Copyright (C) 2003 IBM Corp.
*
- * Copyright (C) 2009, 2013 Frank Schäfer <fschaefer.oss@googlemail.com>
- * - fixes, improvements and documentation for the baud rate encoding methods
- * Copyright (C) 2013 Reinhard Max <max@suse.de>
- * - fixes and improvements for the divisor based baud rate encoding method
- *
* Original driver for 2.2.x by anonymous
*
* This program is free software; you can redistribute it and/or
@@ -134,18 +129,10 @@
enum pl2303_type {
- type_0, /* H version ? */
- type_1, /* H version ? */
- HX_TA, /* HX(A) / X(A) / TA version */ /* TODO: improve */
- HXD_EA_RA_SA, /* HXD / EA / RA / SA version */ /* TODO: improve */
- TB, /* TB version */
- HX_CLONE, /* Cheap and less functional clone of the HX chip */
+ type_0, /* don't know the difference between type 0 and */
+ type_1, /* type 1, until someone from prolific tells us... */
+ HX, /* HX version of the pl2303 chip */
};
-/*
- * NOTE: don't know the difference between type 0 and type 1,
- * until someone from Prolific tells us...
- * TODO: distinguish between X/HX, TA and HXD, EA, RA, SA variants
- */
struct pl2303_serial_private {
enum pl2303_type type;
@@ -185,7 +172,6 @@
{
struct pl2303_serial_private *spriv;
enum pl2303_type type = type_0;
- char *type_str = "unknown (treating as type_0)";
unsigned char *buf;
spriv = kzalloc(sizeof(*spriv), GFP_KERNEL);
@@ -198,53 +184,15 @@
return -ENOMEM;
}
- if (serial->dev->descriptor.bDeviceClass == 0x02) {
+ if (serial->dev->descriptor.bDeviceClass == 0x02)
type = type_0;
- type_str = "type_0";
- } else if (serial->dev->descriptor.bMaxPacketSize0 == 0x40) {
- /*
- * NOTE: The bcdDevice version is the only difference between
- * the device descriptors of the X/HX, HXD, EA, RA, SA, TA, TB
- */
- if (le16_to_cpu(serial->dev->descriptor.bcdDevice) == 0x300) {
- /* Check if the device is a clone */
- pl2303_vendor_read(0x9494, 0, serial, buf);
- /*
- * NOTE: Not sure if this read is really needed.
- * The HX returns 0x00, the clone 0x02, but the Windows
- * driver seems to ignore the value and continues.
- */
- pl2303_vendor_write(0x0606, 0xaa, serial);
- pl2303_vendor_read(0x8686, 0, serial, buf);
- if (buf[0] != 0xaa) {
- type = HX_CLONE;
- type_str = "X/HX clone (limited functionality)";
- } else {
- type = HX_TA;
- type_str = "X/HX/TA";
- }
- pl2303_vendor_write(0x0606, 0x00, serial);
- } else if (le16_to_cpu(serial->dev->descriptor.bcdDevice)
- == 0x400) {
- type = HXD_EA_RA_SA;
- type_str = "HXD/EA/RA/SA";
- } else if (le16_to_cpu(serial->dev->descriptor.bcdDevice)
- == 0x500) {
- type = TB;
- type_str = "TB";
- } else {
- dev_info(&serial->interface->dev,
- "unknown/unsupported device type\n");
- kfree(spriv);
- kfree(buf);
- return -ENODEV;
- }
- } else if (serial->dev->descriptor.bDeviceClass == 0x00
- || serial->dev->descriptor.bDeviceClass == 0xFF) {
+ else if (serial->dev->descriptor.bMaxPacketSize0 == 0x40)
+ type = HX;
+ else if (serial->dev->descriptor.bDeviceClass == 0x00)
type = type_1;
- type_str = "type_1";
- }
- dev_dbg(&serial->interface->dev, "device type: %s\n", type_str);
+ else if (serial->dev->descriptor.bDeviceClass == 0xFF)
+ type = type_1;
+ dev_dbg(&serial->interface->dev, "device type: %d\n", type);
spriv->type = type;
usb_set_serial_data(serial, spriv);
@@ -259,10 +207,10 @@
pl2303_vendor_read(0x8383, 0, serial, buf);
pl2303_vendor_write(0, 1, serial);
pl2303_vendor_write(1, 0, serial);
- if (type == type_0 || type == type_1)
- pl2303_vendor_write(2, 0x24, serial);
- else
+ if (type == HX)
pl2303_vendor_write(2, 0x44, serial);
+ else
+ pl2303_vendor_write(2, 0x24, serial);
kfree(buf);
return 0;
@@ -316,174 +264,65 @@
return retval;
}
-static int pl2303_baudrate_encode_direct(int baud, enum pl2303_type type,
- u8 buf[4])
+static void pl2303_encode_baudrate(struct tty_struct *tty,
+ struct usb_serial_port *port,
+ u8 buf[4])
{
- /*
- * NOTE: Only the values defined in baud_sup are supported !
- * => if unsupported values are set, the PL2303 uses 9600 baud instead
- * => HX clones just don't work at unsupported baud rates < 115200 baud,
- * for baud rates > 115200 they run at 115200 baud
- */
const int baud_sup[] = { 75, 150, 300, 600, 1200, 1800, 2400, 3600,
- 4800, 7200, 9600, 14400, 19200, 28800, 38400,
- 57600, 115200, 230400, 460800, 614400, 921600,
- 1228800, 2457600, 3000000, 6000000, 12000000 };
- /*
- * NOTE: With the exception of type_0/1 devices, the following
- * additional baud rates are supported (tested with HX rev. 3A only):
- * 110*, 56000*, 128000, 134400, 161280, 201600, 256000*, 268800,
- * 403200, 806400. (*: not HX and HX clones)
- *
- * Maximum values: HXD, TB: 12000000; HX, TA: 6000000;
- * type_0+1: 1228800; RA: 921600; HX clones, SA: 115200
- *
- * As long as we are not using this encoding method for anything else
- * than the type_0+1, HX and HX clone chips, there is no point in
- * complicating the code to support them.
- */
+ 4800, 7200, 9600, 14400, 19200, 28800, 38400,
+ 57600, 115200, 230400, 460800, 500000, 614400,
+ 921600, 1228800, 2457600, 3000000, 6000000 };
+
+ struct usb_serial *serial = port->serial;
+ struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
+ int baud;
int i;
+ /*
+ * NOTE: Only the values defined in baud_sup are supported!
+ * => if unsupported values are set, the PL2303 seems to use
+ * 9600 baud (at least my PL2303X always does)
+ */
+ baud = tty_get_baud_rate(tty);
+ dev_dbg(&port->dev, "baud requested = %d\n", baud);
+ if (!baud)
+ return;
+
/* Set baudrate to nearest supported value */
for (i = 0; i < ARRAY_SIZE(baud_sup); ++i) {
if (baud_sup[i] > baud)
break;
}
+
if (i == ARRAY_SIZE(baud_sup))
baud = baud_sup[i - 1];
else if (i > 0 && (baud_sup[i] - baud) > (baud - baud_sup[i - 1]))
baud = baud_sup[i - 1];
else
baud = baud_sup[i];
- /* Respect the chip type specific baud rate limits */
- /*
- * FIXME: as long as we don't know how to distinguish between the
- * HXD, EA, RA, and SA chip variants, allow the max. value of 12M.
- */
- if (type == HX_TA)
- baud = min_t(int, baud, 6000000);
- else if (type == type_0 || type == type_1)
+
+ /* type_0, type_1 only support up to 1228800 baud */
+ if (spriv->type != HX)
baud = min_t(int, baud, 1228800);
- else if (type == HX_CLONE)
- baud = min_t(int, baud, 115200);
- /* Direct (standard) baud rate encoding method */
- put_unaligned_le32(baud, buf);
- return baud;
-}
-
-static int pl2303_baudrate_encode_divisor(int baud, enum pl2303_type type,
- u8 buf[4])
-{
- /*
- * Divisor based baud rate encoding method
- *
- * NOTE: HX clones do NOT support this method.
- * It's not clear if the type_0/1 chips support it.
- *
- * divisor = 12MHz * 32 / baudrate = 2^A * B
- *
- * with
- *
- * A = buf[1] & 0x0e
- * B = buf[0] + (buf[1] & 0x01) << 8
- *
- * Special cases:
- * => 8 < B < 16: device seems to work not properly
- * => B <= 8: device uses the max. value B = 512 instead
- */
- unsigned int A, B;
-
- /*
- * NOTE: The Windows driver allows maximum baud rates of 110% of the
- * specified maximium value.
- * Quick tests with early (2004) HX (rev. A) chips suggest, that even
- * higher baud rates (up to the maximum of 24M baud !) are working fine,
- * but that should really be tested carefully in "real life" scenarios
- * before removing the upper limit completely.
- * Baud rates smaller than the specified 75 baud are definitely working
- * fine.
- */
- if (type == type_0 || type == type_1)
- baud = min_t(int, baud, 1228800 * 1.1);
- else if (type == HX_TA)
- baud = min_t(int, baud, 6000000 * 1.1);
- else if (type == HXD_EA_RA_SA)
- /* HXD, EA: 12Mbps; RA: 1Mbps; SA: 115200 bps */
- /*
- * FIXME: as long as we don't know how to distinguish between
- * these chip variants, allow the max. of these values
- */
- baud = min_t(int, baud, 12000000 * 1.1);
- else if (type == TB)
- baud = min_t(int, baud, 12000000 * 1.1);
- /* Determine factors A and B */
- A = 0;
- B = 12000000 * 32 / baud; /* 12MHz */
- B <<= 1; /* Add one bit for rounding */
- while (B > (512 << 1) && A <= 14) {
- A += 2;
- B >>= 2;
- }
- if (A > 14) { /* max. divisor = min. baudrate reached */
- A = 14;
- B = 512;
- /* => ~45.78 baud */
+ if (baud <= 115200) {
+ put_unaligned_le32(baud, buf);
} else {
- B = (B + 1) >> 1; /* Round the last bit */
- }
- /* Handle special cases */
- if (B == 512)
- B = 0; /* also: 1 to 8 */
- else if (B < 16)
/*
- * NOTE: With the current algorithm this happens
- * only for A=0 and means that the min. divisor
- * (respectively: the max. baudrate) is reached.
+ * Apparently the formula for higher speeds is:
+ * baudrate = 12M * 32 / (2^buf[1]) / buf[0]
*/
- B = 16; /* => 24 MBaud */
- /* Encode the baud rate */
- buf[3] = 0x80; /* Select divisor encoding method */
- buf[2] = 0;
- buf[1] = (A & 0x0e); /* A */
- buf[1] |= ((B & 0x100) >> 8); /* MSB of B */
- buf[0] = B & 0xff; /* 8 LSBs of B */
- /* Calculate the actual/resulting baud rate */
- if (B <= 8)
- B = 512;
- baud = 12000000 * 32 / ((1 << A) * B);
+ unsigned tmp = 12000000 * 32 / baud;
+ buf[3] = 0x80;
+ buf[2] = 0;
+ buf[1] = (tmp >= 256);
+ while (tmp >= 256) {
+ tmp >>= 2;
+ buf[1] <<= 1;
+ }
+ buf[0] = tmp;
+ }
- return baud;
-}
-
-static void pl2303_encode_baudrate(struct tty_struct *tty,
- struct usb_serial_port *port,
- enum pl2303_type type,
- u8 buf[4])
-{
- int baud;
-
- baud = tty_get_baud_rate(tty);
- dev_dbg(&port->dev, "baud requested = %d\n", baud);
- if (!baud)
- return;
- /*
- * There are two methods for setting/encoding the baud rate
- * 1) Direct method: encodes the baud rate value directly
- * => supported by all chip types
- * 2) Divisor based method: encodes a divisor to a base value (12MHz*32)
- * => not supported by HX clones (and likely type_0/1 chips)
- *
- * NOTE: Although the divisor based baud rate encoding method is much
- * more flexible, some of the standard baud rate values can not be
- * realized exactly. But the difference is very small (max. 0.2%) and
- * the device likely uses the same baud rate generator for both methods
- * so that there is likley no difference.
- */
- if (type == type_0 || type == type_1 || type == HX_CLONE)
- baud = pl2303_baudrate_encode_direct(baud, type, buf);
- else
- baud = pl2303_baudrate_encode_divisor(baud, type, buf);
/* Save resulting baud rate */
tty_encode_baud_rate(tty, baud, baud);
dev_dbg(&port->dev, "baud set = %d\n", baud);
@@ -540,8 +379,8 @@
dev_dbg(&port->dev, "data bits = %d\n", buf[6]);
}
- /* For reference: buf[0]:buf[3] baud rate value */
- pl2303_encode_baudrate(tty, port, spriv->type, buf);
+ /* For reference buf[0]:buf[3] baud rate value */
+ pl2303_encode_baudrate(tty, port, &buf[0]);
/* For reference buf[4]=0 is 1 stop bits */
/* For reference buf[4]=1 is 1.5 stop bits */
@@ -618,10 +457,10 @@
dev_dbg(&port->dev, "0xa1:0x21:0:0 %d - %7ph\n", i, buf);
if (C_CRTSCTS(tty)) {
- if (spriv->type == type_0 || spriv->type == type_1)
- pl2303_vendor_write(0x0, 0x41, serial);
- else
+ if (spriv->type == HX)
pl2303_vendor_write(0x0, 0x61, serial);
+ else
+ pl2303_vendor_write(0x0, 0x41, serial);
} else {
pl2303_vendor_write(0x0, 0x0, serial);
}
@@ -658,7 +497,7 @@
struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
int result;
- if (spriv->type == type_0 || spriv->type == type_1) {
+ if (spriv->type != HX) {
usb_clear_halt(serial->dev, port->write_urb->pipe);
usb_clear_halt(serial->dev, port->read_urb->pipe);
} else {
@@ -833,7 +672,6 @@
result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
BREAK_REQUEST, BREAK_REQUEST_TYPE, state,
0, NULL, 0, 100);
- /* NOTE: HX clones don't support sending breaks, -EPIPE is returned */
if (result)
dev_err(&port->dev, "error sending break = %d\n", result);
}
diff --git a/fs/dcache.c b/fs/dcache.c
index 20532cb..ae6ebb8 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -542,7 +542,7 @@
* If ref is non-zero, then decrement the refcount too.
* Returns dentry requiring refcount drop, or NULL if we're done.
*/
-static inline struct dentry *
+static struct dentry *
dentry_kill(struct dentry *dentry, int unlock_on_failure)
__releases(dentry->d_lock)
{
@@ -630,7 +630,8 @@
goto kill_it;
}
- dentry->d_flags |= DCACHE_REFERENCED;
+ if (!(dentry->d_flags & DCACHE_REFERENCED))
+ dentry->d_flags |= DCACHE_REFERENCED;
dentry_lru_add(dentry);
dentry->d_lockref.count--;
diff --git a/fs/eventpoll.c b/fs/eventpoll.c
index 473e09d..810c28f 100644
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -34,7 +34,6 @@
#include <linux/mutex.h>
#include <linux/anon_inodes.h>
#include <linux/device.h>
-#include <linux/freezer.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/mman.h>
@@ -1605,8 +1604,7 @@
}
spin_unlock_irqrestore(&ep->lock, flags);
- if (!freezable_schedule_hrtimeout_range(to, slack,
- HRTIMER_MODE_ABS))
+ if (!schedule_hrtimeout_range(to, slack, HRTIMER_MODE_ABS))
timed_out = 1;
spin_lock_irqsave(&ep->lock, flags);
diff --git a/fs/select.c b/fs/select.c
index 35d4adc7..dfd5cb1 100644
--- a/fs/select.c
+++ b/fs/select.c
@@ -238,8 +238,7 @@
set_current_state(state);
if (!pwq->triggered)
- rc = freezable_schedule_hrtimeout_range(expires, slack,
- HRTIMER_MODE_ABS);
+ rc = schedule_hrtimeout_range(expires, slack, HRTIMER_MODE_ABS);
__set_current_state(TASK_RUNNING);
/*
diff --git a/include/uapi/linux/perf_event.h b/include/uapi/linux/perf_event.h
index 009a655..2fc1602 100644
--- a/include/uapi/linux/perf_event.h
+++ b/include/uapi/linux/perf_event.h
@@ -456,13 +456,15 @@
/*
* Control data for the mmap() data buffer.
*
- * User-space reading the @data_head value should issue an rmb(), on
- * SMP capable platforms, after reading this value -- see
- * perf_event_wakeup().
+ * User-space reading the @data_head value should issue an smp_rmb(),
+ * after reading this value.
*
* When the mapping is PROT_WRITE the @data_tail value should be
- * written by userspace to reflect the last read data. In this case
- * the kernel will not over-write unread data.
+ * written by userspace to reflect the last read data, after issueing
+ * an smp_mb() to separate the data read from the ->data_tail store.
+ * In this case the kernel will not over-write unread data.
+ *
+ * See perf_output_put_handle() for the data ordering.
*/
__u64 data_head; /* head in the data section */
__u64 data_tail; /* user-space written tail */
diff --git a/kernel/events/ring_buffer.c b/kernel/events/ring_buffer.c
index cd55144..9c2ddfb 100644
--- a/kernel/events/ring_buffer.c
+++ b/kernel/events/ring_buffer.c
@@ -87,10 +87,31 @@
goto out;
/*
- * Publish the known good head. Rely on the full barrier implied
- * by atomic_dec_and_test() order the rb->head read and this
- * write.
+ * Since the mmap() consumer (userspace) can run on a different CPU:
+ *
+ * kernel user
+ *
+ * READ ->data_tail READ ->data_head
+ * smp_mb() (A) smp_rmb() (C)
+ * WRITE $data READ $data
+ * smp_wmb() (B) smp_mb() (D)
+ * STORE ->data_head WRITE ->data_tail
+ *
+ * Where A pairs with D, and B pairs with C.
+ *
+ * I don't think A needs to be a full barrier because we won't in fact
+ * write data until we see the store from userspace. So we simply don't
+ * issue the data WRITE until we observe it. Be conservative for now.
+ *
+ * OTOH, D needs to be a full barrier since it separates the data READ
+ * from the tail WRITE.
+ *
+ * For B a WMB is sufficient since it separates two WRITEs, and for C
+ * an RMB is sufficient since it separates two READs.
+ *
+ * See perf_output_begin().
*/
+ smp_wmb();
rb->user_page->data_head = head;
/*
@@ -154,9 +175,11 @@
* Userspace could choose to issue a mb() before updating the
* tail pointer. So that all reads will be completed before the
* write is issued.
+ *
+ * See perf_output_put_handle().
*/
tail = ACCESS_ONCE(rb->user_page->data_tail);
- smp_rmb();
+ smp_mb();
offset = head = local_read(&rb->head);
head += size;
if (unlikely(!perf_output_space(rb, tail, offset, head)))
diff --git a/lib/scatterlist.c b/lib/scatterlist.c
index a685c8a..d16fa29 100644
--- a/lib/scatterlist.c
+++ b/lib/scatterlist.c
@@ -577,7 +577,8 @@
miter->__offset += miter->consumed;
miter->__remaining -= miter->consumed;
- if (miter->__flags & SG_MITER_TO_SG)
+ if ((miter->__flags & SG_MITER_TO_SG) &&
+ !PageSlab(miter->page))
flush_kernel_dcache_page(miter->page);
if (miter->__flags & SG_MITER_ATOMIC) {
diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index 610e3df..cca80d9 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -1278,64 +1278,90 @@
int do_huge_pmd_numa_page(struct mm_struct *mm, struct vm_area_struct *vma,
unsigned long addr, pmd_t pmd, pmd_t *pmdp)
{
+ struct anon_vma *anon_vma = NULL;
struct page *page;
unsigned long haddr = addr & HPAGE_PMD_MASK;
+ int page_nid = -1, this_nid = numa_node_id();
int target_nid;
- int current_nid = -1;
- bool migrated;
+ bool page_locked;
+ bool migrated = false;
spin_lock(&mm->page_table_lock);
if (unlikely(!pmd_same(pmd, *pmdp)))
goto out_unlock;
page = pmd_page(pmd);
- get_page(page);
- current_nid = page_to_nid(page);
+ page_nid = page_to_nid(page);
count_vm_numa_event(NUMA_HINT_FAULTS);
- if (current_nid == numa_node_id())
+ if (page_nid == this_nid)
count_vm_numa_event(NUMA_HINT_FAULTS_LOCAL);
+ /*
+ * Acquire the page lock to serialise THP migrations but avoid dropping
+ * page_table_lock if at all possible
+ */
+ page_locked = trylock_page(page);
target_nid = mpol_misplaced(page, vma, haddr);
if (target_nid == -1) {
- put_page(page);
- goto clear_pmdnuma;
+ /* If the page was locked, there are no parallel migrations */
+ if (page_locked)
+ goto clear_pmdnuma;
+
+ /*
+ * Otherwise wait for potential migrations and retry. We do
+ * relock and check_same as the page may no longer be mapped.
+ * As the fault is being retried, do not account for it.
+ */
+ spin_unlock(&mm->page_table_lock);
+ wait_on_page_locked(page);
+ page_nid = -1;
+ goto out;
}
- /* Acquire the page lock to serialise THP migrations */
+ /* Page is misplaced, serialise migrations and parallel THP splits */
+ get_page(page);
spin_unlock(&mm->page_table_lock);
- lock_page(page);
+ if (!page_locked)
+ lock_page(page);
+ anon_vma = page_lock_anon_vma_read(page);
/* Confirm the PTE did not while locked */
spin_lock(&mm->page_table_lock);
if (unlikely(!pmd_same(pmd, *pmdp))) {
unlock_page(page);
put_page(page);
+ page_nid = -1;
goto out_unlock;
}
- spin_unlock(&mm->page_table_lock);
- /* Migrate the THP to the requested node */
+ /*
+ * Migrate the THP to the requested node, returns with page unlocked
+ * and pmd_numa cleared.
+ */
+ spin_unlock(&mm->page_table_lock);
migrated = migrate_misplaced_transhuge_page(mm, vma,
pmdp, pmd, addr, page, target_nid);
- if (!migrated)
- goto check_same;
+ if (migrated)
+ page_nid = target_nid;
- task_numa_fault(target_nid, HPAGE_PMD_NR, true);
- return 0;
-
-check_same:
- spin_lock(&mm->page_table_lock);
- if (unlikely(!pmd_same(pmd, *pmdp)))
- goto out_unlock;
+ goto out;
clear_pmdnuma:
+ BUG_ON(!PageLocked(page));
pmd = pmd_mknonnuma(pmd);
set_pmd_at(mm, haddr, pmdp, pmd);
VM_BUG_ON(pmd_numa(*pmdp));
update_mmu_cache_pmd(vma, addr, pmdp);
+ unlock_page(page);
out_unlock:
spin_unlock(&mm->page_table_lock);
- if (current_nid != -1)
- task_numa_fault(current_nid, HPAGE_PMD_NR, false);
+
+out:
+ if (anon_vma)
+ page_unlock_anon_vma_read(anon_vma);
+
+ if (page_nid != -1)
+ task_numa_fault(page_nid, HPAGE_PMD_NR, migrated);
+
return 0;
}
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 497ec33..13b9d0f 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -54,6 +54,7 @@
#include <linux/page_cgroup.h>
#include <linux/cpu.h>
#include <linux/oom.h>
+#include <linux/lockdep.h>
#include "internal.h"
#include <net/sock.h>
#include <net/ip.h>
@@ -2046,6 +2047,12 @@
return total;
}
+#ifdef CONFIG_LOCKDEP
+static struct lockdep_map memcg_oom_lock_dep_map = {
+ .name = "memcg_oom_lock",
+};
+#endif
+
static DEFINE_SPINLOCK(memcg_oom_lock);
/*
@@ -2083,7 +2090,8 @@
}
iter->oom_lock = false;
}
- }
+ } else
+ mutex_acquire(&memcg_oom_lock_dep_map, 0, 1, _RET_IP_);
spin_unlock(&memcg_oom_lock);
@@ -2095,6 +2103,7 @@
struct mem_cgroup *iter;
spin_lock(&memcg_oom_lock);
+ mutex_release(&memcg_oom_lock_dep_map, 1, _RET_IP_);
for_each_mem_cgroup_tree(iter, memcg)
iter->oom_lock = false;
spin_unlock(&memcg_oom_lock);
@@ -2765,10 +2774,10 @@
*ptr = memcg;
return 0;
nomem:
- *ptr = NULL;
- if (gfp_mask & __GFP_NOFAIL)
- return 0;
- return -ENOMEM;
+ if (!(gfp_mask & __GFP_NOFAIL)) {
+ *ptr = NULL;
+ return -ENOMEM;
+ }
bypass:
*ptr = root_mem_cgroup;
return -EINTR;
@@ -3773,7 +3782,6 @@
{
/* Update stat data for mem_cgroup */
preempt_disable();
- WARN_ON_ONCE(from->stat->count[idx] < nr_pages);
__this_cpu_sub(from->stat->count[idx], nr_pages);
__this_cpu_add(to->stat->count[idx], nr_pages);
preempt_enable();
@@ -4950,31 +4958,18 @@
} while (usage > 0);
}
-/*
- * This mainly exists for tests during the setting of set of use_hierarchy.
- * Since this is the very setting we are changing, the current hierarchy value
- * is meaningless
- */
-static inline bool __memcg_has_children(struct mem_cgroup *memcg)
-{
- struct cgroup_subsys_state *pos;
-
- /* bounce at first found */
- css_for_each_child(pos, &memcg->css)
- return true;
- return false;
-}
-
-/*
- * Must be called with memcg_create_mutex held, unless the cgroup is guaranteed
- * to be already dead (as in mem_cgroup_force_empty, for instance). This is
- * from mem_cgroup_count_children(), in the sense that we don't really care how
- * many children we have; we only need to know if we have any. It also counts
- * any memcg without hierarchy as infertile.
- */
static inline bool memcg_has_children(struct mem_cgroup *memcg)
{
- return memcg->use_hierarchy && __memcg_has_children(memcg);
+ lockdep_assert_held(&memcg_create_mutex);
+ /*
+ * The lock does not prevent addition or deletion to the list
+ * of children, but it prevents a new child from being
+ * initialized based on this parent in css_online(), so it's
+ * enough to decide whether hierarchically inherited
+ * attributes can still be changed or not.
+ */
+ return memcg->use_hierarchy &&
+ !list_empty(&memcg->css.cgroup->children);
}
/*
@@ -5054,7 +5049,7 @@
*/
if ((!parent_memcg || !parent_memcg->use_hierarchy) &&
(val == 1 || val == 0)) {
- if (!__memcg_has_children(memcg))
+ if (list_empty(&memcg->css.cgroup->children))
memcg->use_hierarchy = val;
else
retval = -EBUSY;
diff --git a/mm/memory.c b/mm/memory.c
index 1311f26..d176154 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -3521,12 +3521,12 @@
}
int numa_migrate_prep(struct page *page, struct vm_area_struct *vma,
- unsigned long addr, int current_nid)
+ unsigned long addr, int page_nid)
{
get_page(page);
count_vm_numa_event(NUMA_HINT_FAULTS);
- if (current_nid == numa_node_id())
+ if (page_nid == numa_node_id())
count_vm_numa_event(NUMA_HINT_FAULTS_LOCAL);
return mpol_misplaced(page, vma, addr);
@@ -3537,7 +3537,7 @@
{
struct page *page = NULL;
spinlock_t *ptl;
- int current_nid = -1;
+ int page_nid = -1;
int target_nid;
bool migrated = false;
@@ -3567,15 +3567,10 @@
return 0;
}
- current_nid = page_to_nid(page);
- target_nid = numa_migrate_prep(page, vma, addr, current_nid);
+ page_nid = page_to_nid(page);
+ target_nid = numa_migrate_prep(page, vma, addr, page_nid);
pte_unmap_unlock(ptep, ptl);
if (target_nid == -1) {
- /*
- * Account for the fault against the current node if it not
- * being replaced regardless of where the page is located.
- */
- current_nid = numa_node_id();
put_page(page);
goto out;
}
@@ -3583,11 +3578,11 @@
/* Migrate to the requested node */
migrated = migrate_misplaced_page(page, target_nid);
if (migrated)
- current_nid = target_nid;
+ page_nid = target_nid;
out:
- if (current_nid != -1)
- task_numa_fault(current_nid, 1, migrated);
+ if (page_nid != -1)
+ task_numa_fault(page_nid, 1, migrated);
return 0;
}
@@ -3602,7 +3597,6 @@
unsigned long offset;
spinlock_t *ptl;
bool numa = false;
- int local_nid = numa_node_id();
spin_lock(&mm->page_table_lock);
pmd = *pmdp;
@@ -3625,9 +3619,10 @@
for (addr = _addr + offset; addr < _addr + PMD_SIZE; pte++, addr += PAGE_SIZE) {
pte_t pteval = *pte;
struct page *page;
- int curr_nid = local_nid;
+ int page_nid = -1;
int target_nid;
- bool migrated;
+ bool migrated = false;
+
if (!pte_present(pteval))
continue;
if (!pte_numa(pteval))
@@ -3649,25 +3644,19 @@
if (unlikely(page_mapcount(page) != 1))
continue;
- /*
- * Note that the NUMA fault is later accounted to either
- * the node that is currently running or where the page is
- * migrated to.
- */
- curr_nid = local_nid;
- target_nid = numa_migrate_prep(page, vma, addr,
- page_to_nid(page));
- if (target_nid == -1) {
+ page_nid = page_to_nid(page);
+ target_nid = numa_migrate_prep(page, vma, addr, page_nid);
+ pte_unmap_unlock(pte, ptl);
+ if (target_nid != -1) {
+ migrated = migrate_misplaced_page(page, target_nid);
+ if (migrated)
+ page_nid = target_nid;
+ } else {
put_page(page);
- continue;
}
- /* Migrate to the requested node */
- pte_unmap_unlock(pte, ptl);
- migrated = migrate_misplaced_page(page, target_nid);
- if (migrated)
- curr_nid = target_nid;
- task_numa_fault(curr_nid, 1, migrated);
+ if (page_nid != -1)
+ task_numa_fault(page_nid, 1, migrated);
pte = pte_offset_map_lock(mm, pmdp, addr, &ptl);
}
diff --git a/mm/migrate.c b/mm/migrate.c
index 7a7325e..c046927 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -1715,12 +1715,12 @@
unlock_page(new_page);
put_page(new_page); /* Free it */
- unlock_page(page);
+ /* Retake the callers reference and putback on LRU */
+ get_page(page);
putback_lru_page(page);
-
- count_vm_events(PGMIGRATE_FAIL, HPAGE_PMD_NR);
- isolated = 0;
- goto out;
+ mod_zone_page_state(page_zone(page),
+ NR_ISOLATED_ANON + page_lru, -HPAGE_PMD_NR);
+ goto out_fail;
}
/*
@@ -1737,9 +1737,9 @@
entry = maybe_pmd_mkwrite(pmd_mkdirty(entry), vma);
entry = pmd_mkhuge(entry);
- page_add_new_anon_rmap(new_page, vma, haddr);
-
+ pmdp_clear_flush(vma, haddr, pmd);
set_pmd_at(mm, haddr, pmd, entry);
+ page_add_new_anon_rmap(new_page, vma, haddr);
update_mmu_cache_pmd(vma, address, &entry);
page_remove_rmap(page);
/*
@@ -1758,7 +1758,6 @@
count_vm_events(PGMIGRATE_SUCCESS, HPAGE_PMD_NR);
count_vm_numa_events(NUMA_PAGE_MIGRATE, HPAGE_PMD_NR);
-out:
mod_zone_page_state(page_zone(page),
NR_ISOLATED_ANON + page_lru,
-HPAGE_PMD_NR);
@@ -1767,6 +1766,10 @@
out_fail:
count_vm_events(PGMIGRATE_FAIL, HPAGE_PMD_NR);
out_dropref:
+ entry = pmd_mknonnuma(entry);
+ set_pmd_at(mm, haddr, pmd, entry);
+ update_mmu_cache_pmd(vma, address, &entry);
+
unlock_page(page);
put_page(page);
return 0;
diff --git a/mm/mprotect.c b/mm/mprotect.c
index a3af058..412ba2b 100644
--- a/mm/mprotect.c
+++ b/mm/mprotect.c
@@ -148,7 +148,7 @@
split_huge_page_pmd(vma, addr, pmd);
else if (change_huge_pmd(vma, pmd, addr, newprot,
prot_numa)) {
- pages += HPAGE_PMD_NR;
+ pages++;
continue;
}
/* fall through */
diff --git a/sound/core/pcm.c b/sound/core/pcm.c
index 17f45e8..e1e9e0c 100644
--- a/sound/core/pcm.c
+++ b/sound/core/pcm.c
@@ -49,6 +49,8 @@
struct snd_pcm *pcm;
list_for_each_entry(pcm, &snd_pcm_devices, list) {
+ if (pcm->internal)
+ continue;
if (pcm->card == card && pcm->device == device)
return pcm;
}
@@ -60,6 +62,8 @@
struct snd_pcm *pcm;
list_for_each_entry(pcm, &snd_pcm_devices, list) {
+ if (pcm->internal)
+ continue;
if (pcm->card == card && pcm->device > device)
return pcm->device;
else if (pcm->card->number > card->number)
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index bf313bea..8ad5543 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -4623,6 +4623,7 @@
SND_PCI_QUIRK(0x1028, 0x05db, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x103c, 0x1632, "HP RP5800", ALC662_FIXUP_HP_RP5800),
SND_PCI_QUIRK(0x1043, 0x1477, "ASUS N56VZ", ALC662_FIXUP_ASUS_MODE4),
+ SND_PCI_QUIRK(0x1043, 0x1bf3, "ASUS N76VZ", ALC662_FIXUP_ASUS_MODE4),
SND_PCI_QUIRK(0x1043, 0x8469, "ASUS mobo", ALC662_FIXUP_NO_JACK_DETECT),
SND_PCI_QUIRK(0x105b, 0x0cd6, "Foxconn", ALC662_FIXUP_ASUS_MODE2),
SND_PCI_QUIRK(0x144d, 0xc051, "Samsung R720", ALC662_FIXUP_IDEAPAD),
diff --git a/sound/soc/codecs/wm_hubs.c b/sound/soc/codecs/wm_hubs.c
index 8b50e59..01daf65 100644
--- a/sound/soc/codecs/wm_hubs.c
+++ b/sound/soc/codecs/wm_hubs.c
@@ -530,6 +530,7 @@
hubs->hp_startup_mode);
break;
}
+ break;
case SND_SOC_DAPM_PRE_PMD:
snd_soc_update_bits(codec, WM8993_CHARGE_PUMP_1,
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index c17c14c..b2949ae 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -1949,7 +1949,7 @@
w->active ? "active" : "inactive");
list_for_each_entry(p, &w->sources, list_sink) {
- if (p->connected && !p->connected(w, p->sink))
+ if (p->connected && !p->connected(w, p->source))
continue;
if (p->connect)
@@ -3495,6 +3495,7 @@
if (!w) {
dev_err(dapm->dev, "ASoC: Failed to create %s widget\n",
dai->driver->playback.stream_name);
+ return -ENOMEM;
}
w->priv = dai;
@@ -3513,6 +3514,7 @@
if (!w) {
dev_err(dapm->dev, "ASoC: Failed to create %s widget\n",
dai->driver->capture.stream_name);
+ return -ENOMEM;
}
w->priv = dai;
