ARM: vexpress/TC2: Implement MCPM power_down_finish()
This patch implements the power_down_finish() method for TC2, to
enable the kernel to confirm when CPUs are safely powered down.
The information required for determining when a CPU is parked
cannot be obtained from any single place, so a few sources of
information must be combined:
* mcpm_cpu_power_down() must be pending for the CPU, so that we
don't get confused by false STANDBYWFI positives arising from
CPUidle. This is detected by waiting for the tc2_pm use count
for the target CPU to reach 0.
* Either the SPC must report that the CPU has asserted
STANDBYWFI, or the TC2 tile's reset control logic must be
holding the CPU in reset.
Just checking for STANDBYWFI is not sufficient, because this
signal is not latched when the the cluster is clamped off and
powered down: the relevant status bits just drop to zero. This
means that STANDBYWFI status cannot be used for reliable
detection of the last CPU in a cluster reaching WFI.
This patch is required in order for kexec to work with MCPM on TC2.
MCPM code was changed in commit 0de0d6467525 ('ARM: 7848/1: mcpm:
Implement cpu_kill() to synchronise on powerdown'), and since then it
will hit a WARN_ON_ONCE() due to power_down_finish not being implemented
on the TC2 platform.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Pawel Moll <pawel.moll@arm.com>
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
diff --git a/arch/arm/mach-vexpress/spc.c b/arch/arm/mach-vexpress/spc.c
index 033d34d..c26ef5b 100644
--- a/arch/arm/mach-vexpress/spc.c
+++ b/arch/arm/mach-vexpress/spc.c
@@ -53,6 +53,11 @@
#define A15_BX_ADDR0 0x68
#define A7_BX_ADDR0 0x78
+/* SPC CPU/cluster reset statue */
+#define STANDBYWFI_STAT 0x3c
+#define STANDBYWFI_STAT_A15_CPU_MASK(cpu) (1 << (cpu))
+#define STANDBYWFI_STAT_A7_CPU_MASK(cpu) (1 << (3 + (cpu)))
+
/* SPC system config interface registers */
#define SYSCFG_WDATA 0x70
#define SYSCFG_RDATA 0x74
@@ -213,6 +218,41 @@
writel_relaxed(enable, info->baseaddr + pwdrn_reg);
}
+static u32 standbywfi_cpu_mask(u32 cpu, u32 cluster)
+{
+ return cluster_is_a15(cluster) ?
+ STANDBYWFI_STAT_A15_CPU_MASK(cpu)
+ : STANDBYWFI_STAT_A7_CPU_MASK(cpu);
+}
+
+/**
+ * ve_spc_cpu_in_wfi(u32 cpu, u32 cluster)
+ *
+ * @cpu: mpidr[7:0] bitfield describing CPU affinity level within cluster
+ * @cluster: mpidr[15:8] bitfield describing cluster affinity level
+ *
+ * @return: non-zero if and only if the specified CPU is in WFI
+ *
+ * Take care when interpreting the result of this function: a CPU might
+ * be in WFI temporarily due to idle, and is not necessarily safely
+ * parked.
+ */
+int ve_spc_cpu_in_wfi(u32 cpu, u32 cluster)
+{
+ int ret;
+ u32 mask = standbywfi_cpu_mask(cpu, cluster);
+
+ if (cluster >= MAX_CLUSTERS)
+ return 1;
+
+ ret = readl_relaxed(info->baseaddr + STANDBYWFI_STAT);
+
+ pr_debug("%s: PCFGREG[0x%X] = 0x%08X, mask = 0x%X\n",
+ __func__, STANDBYWFI_STAT, ret, mask);
+
+ return ret & mask;
+}
+
static int ve_spc_get_performance(int cluster, u32 *freq)
{
struct ve_spc_opp *opps = info->opps[cluster];
diff --git a/arch/arm/mach-vexpress/spc.h b/arch/arm/mach-vexpress/spc.h
index dbd44c3..793d065 100644
--- a/arch/arm/mach-vexpress/spc.h
+++ b/arch/arm/mach-vexpress/spc.h
@@ -20,5 +20,6 @@
void ve_spc_cpu_wakeup_irq(u32 cluster, u32 cpu, bool set);
void ve_spc_set_resume_addr(u32 cluster, u32 cpu, u32 addr);
void ve_spc_powerdown(u32 cluster, bool enable);
+int ve_spc_cpu_in_wfi(u32 cpu, u32 cluster);
#endif
diff --git a/arch/arm/mach-vexpress/tc2_pm.c b/arch/arm/mach-vexpress/tc2_pm.c
index 05a364c50..29e7785 100644
--- a/arch/arm/mach-vexpress/tc2_pm.c
+++ b/arch/arm/mach-vexpress/tc2_pm.c
@@ -12,6 +12,7 @@
* published by the Free Software Foundation.
*/
+#include <linux/delay.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
@@ -32,11 +33,17 @@
#include "spc.h"
/* SCC conf registers */
+#define RESET_CTRL 0x018
+#define RESET_A15_NCORERESET(cpu) (1 << (2 + (cpu)))
+#define RESET_A7_NCORERESET(cpu) (1 << (16 + (cpu)))
+
#define A15_CONF 0x400
#define A7_CONF 0x500
#define SYS_INFO 0x700
#define SPC_BASE 0xb00
+static void __iomem *scc;
+
/*
* We can't use regular spinlocks. In the switcher case, it is possible
* for an outbound CPU to call power_down() after its inbound counterpart
@@ -190,6 +197,55 @@
tc2_pm_down(0);
}
+static int tc2_core_in_reset(unsigned int cpu, unsigned int cluster)
+{
+ u32 mask = cluster ?
+ RESET_A7_NCORERESET(cpu)
+ : RESET_A15_NCORERESET(cpu);
+
+ return !(readl_relaxed(scc + RESET_CTRL) & mask);
+}
+
+#define POLL_MSEC 10
+#define TIMEOUT_MSEC 1000
+
+static int tc2_pm_power_down_finish(unsigned int cpu, unsigned int cluster)
+{
+ unsigned tries;
+
+ pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+ BUG_ON(cluster >= TC2_CLUSTERS || cpu >= TC2_MAX_CPUS_PER_CLUSTER);
+
+ for (tries = 0; tries < TIMEOUT_MSEC / POLL_MSEC; ++tries) {
+ /*
+ * Only examine the hardware state if the target CPU has
+ * caught up at least as far as tc2_pm_down():
+ */
+ if (ACCESS_ONCE(tc2_pm_use_count[cpu][cluster]) == 0) {
+ pr_debug("%s(cpu=%u, cluster=%u): RESET_CTRL = 0x%08X\n",
+ __func__, cpu, cluster,
+ readl_relaxed(scc + RESET_CTRL));
+
+ /*
+ * We need the CPU to reach WFI, but the power
+ * controller may put the cluster in reset and
+ * power it off as soon as that happens, before
+ * we have a chance to see STANDBYWFI.
+ *
+ * So we need to check for both conditions:
+ */
+ if (tc2_core_in_reset(cpu, cluster) ||
+ ve_spc_cpu_in_wfi(cpu, cluster))
+ return 0; /* success: the CPU is halted */
+ }
+
+ /* Otherwise, wait and retry: */
+ msleep(POLL_MSEC);
+ }
+
+ return -ETIMEDOUT; /* timeout */
+}
+
static void tc2_pm_suspend(u64 residency)
{
unsigned int mpidr, cpu, cluster;
@@ -232,10 +288,11 @@
}
static const struct mcpm_platform_ops tc2_pm_power_ops = {
- .power_up = tc2_pm_power_up,
- .power_down = tc2_pm_power_down,
- .suspend = tc2_pm_suspend,
- .powered_up = tc2_pm_powered_up,
+ .power_up = tc2_pm_power_up,
+ .power_down = tc2_pm_power_down,
+ .power_down_finish = tc2_pm_power_down_finish,
+ .suspend = tc2_pm_suspend,
+ .powered_up = tc2_pm_powered_up,
};
static bool __init tc2_pm_usage_count_init(void)
@@ -269,7 +326,6 @@
static int __init tc2_pm_init(void)
{
int ret, irq;
- void __iomem *scc;
u32 a15_cluster_id, a7_cluster_id, sys_info;
struct device_node *np;