Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A collection of fixes for ARM platforms. Most are fixes for DTS
files, mostly from DT conversion on OMAP which is still finding a few
issues here and there.
There's a couple of small stale code removal patches that we usually
queue for the next release instead, but they seemed harmless enough to
bring in now.
Also, a fix for backlight on some PXA platforms, and a cache
configuration fix for Tegra, etc"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (25 commits)
MAINTAINERS: add additional ARM BCM281xx/BCM11xxx maintainer
ARM: tegra: only run PL310 init on systems with one
ARM: tegra: Add head numbers to display controllers
ARM: imx6: build pm-imx6q.c independently of CONFIG_PM
ARM: tegra: fix RTC0 alias for Cardhu
ARM: dove: dt: revert PMU interrupt controller node
Documentation: dt: OMAP: Update Overo/Tobi
ARM: dts: Add support for both OMAP35xx and OMAP36xx Overo/Tobi
ARM: dts: omap3-tobi: Use the correct vendor prefix
ARM: dts: omap3-tobi: Fix boot with OMAP36xx-based Overo
ARM: OMAP2+: Remove legacy macros for zoom platforms
ARM: OMAP2+: Remove MACH_NOKIA_N800
ARM: dts: N900: add missing compatible property
ARM: dts: N9/N950: fix boot hang with 3.14-rc1
ARM: OMAP1: nokia770: enable tahvo-usb
ARM: OMAP2+: gpmc: fix: DT ONENAND child nodes not probed when MTD_ONENAND is built as module
ARM: OMAP2+: gpmc: fix: DT NAND child nodes not probed when MTD_NAND is built as module
ARM: dts: omap3-gta04: Fix mmc1 properties.
ARM: dts: omap3-gta04: Fix 'aux' gpio key flags.
ARM: OMAP2+: add missing ARCH_HAS_OPP
...
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index 34dc40c..af9b4a0 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -91,7 +91,7 @@
compatible = "ti,omap3-beagle", "ti,omap3"
- OMAP3 Tobi with Overo : Commercial expansion board with daughter board
- compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3"
+ compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3"
- OMAP4 SDP : Software Development Board
compatible = "ti,omap4-sdp", "ti,omap4430"
diff --git a/MAINTAINERS b/MAINTAINERS
index 5aa1c50..85b3dd8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1860,6 +1860,7 @@
BROADCOM BCM281XX/BCM11XXX ARM ARCHITECTURE
M: Christian Daudt <bcm@fixthebug.org>
+M: Matt Porter <mporter@linaro.org>
L: bcm-kernel-feedback-list@broadcom.com
T: git git://git.github.com/broadcom/bcm11351
S: Maintained
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 6d1e43d..0320303 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -209,7 +209,8 @@
omap3-n900.dtb \
omap3-n9.dtb \
omap3-n950.dtb \
- omap3-tobi.dtb \
+ omap3-overo-tobi.dtb \
+ omap3-overo-storm-tobi.dtb \
omap3-gta04.dtb \
omap3-igep0020.dtb \
omap3-igep0030.dtb \
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 4718ec4..486880b 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -121,7 +121,7 @@
ti,model = "AM335x-EVMSK";
ti,audio-codec = <&tlv320aic3106>;
ti,mcasp-controller = <&mcasp1>;
- ti,codec-clock-rate = <24576000>;
+ ti,codec-clock-rate = <24000000>;
ti,audio-routing =
"Headphone Jack", "HPLOUT",
"Headphone Jack", "HPROUT";
@@ -256,6 +256,12 @@
>;
};
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ >;
+ };
+
mcasp1_pins: mcasp1_pins {
pinctrl-single,pins = <
0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
@@ -456,6 +462,9 @@
status = "okay";
vmmc-supply = <&vmmc_reg>;
bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
};
&sham {
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index 6660968..9480cf8 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -23,6 +23,7 @@
gpio0 = &gpio0;
gpio1 = &gpio1;
gpio2 = &gpio2;
+ eth3 = ð3;
};
cpus {
@@ -291,7 +292,7 @@
interrupts = <91>;
};
- ethernet@34000 {
+ eth3: ethernet@34000 {
compatible = "marvell,armada-370-neta";
reg = <0x34000 0x4000>;
interrupts = <14>;
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 2b76524..187fd46 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -379,15 +379,6 @@
#clock-cells = <1>;
};
- pmu_intc: pmu-interrupt-ctrl@d0050 {
- compatible = "marvell,dove-pmu-intc";
- interrupt-controller;
- #interrupt-cells = <1>;
- reg = <0xd0050 0x8>;
- interrupts = <33>;
- marvell,#interrupts = <7>;
- };
-
pinctrl: pin-ctrl@d0200 {
compatible = "marvell,dove-pinctrl";
reg = <0xd0200 0x10>;
@@ -610,8 +601,6 @@
rtc: real-time-clock@d8500 {
compatible = "marvell,orion-rtc";
reg = <0xd8500 0x20>;
- interrupt-parent = <&pmu_intc>;
- interrupts = <5>;
};
gpio2: gpio-ctrl@e8400 {
diff --git a/arch/arm/boot/dts/omap3-gta04.dts b/arch/arm/boot/dts/omap3-gta04.dts
index b9b55c9..c551e4a 100644
--- a/arch/arm/boot/dts/omap3-gta04.dts
+++ b/arch/arm/boot/dts/omap3-gta04.dts
@@ -32,7 +32,7 @@
aux-button {
label = "aux";
linux,code = <169>;
- gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
gpio-key,wakeup;
};
};
@@ -92,6 +92,8 @@
bmp085@77 {
compatible = "bosch,bmp085";
reg = <0x77>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <17 IRQ_TYPE_EDGE_RISING>;
};
/* leds */
@@ -141,8 +143,8 @@
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&vmmc1>;
- vmmc_aux-supply = <&vsim>;
bus-width = <4>;
+ ti,non-removable;
};
&mmc2 {
diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts
index 39828ce..9938b5d 100644
--- a/arch/arm/boot/dts/omap3-n9.dts
+++ b/arch/arm/boot/dts/omap3-n9.dts
@@ -14,5 +14,5 @@
/ {
model = "Nokia N9";
- compatible = "nokia,omap3-n9", "ti,omap3";
+ compatible = "nokia,omap3-n9", "ti,omap36xx", "ti,omap3";
};
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 6fc85f9..0bf40c9 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -1,6 +1,6 @@
/*
* Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
- * Copyright 2013 Aaro Koskinen <aaro.koskinen@iki.fi>
+ * Copyright (C) 2013-2014 Aaro Koskinen <aaro.koskinen@iki.fi>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 (or later) as
@@ -13,7 +13,7 @@
/ {
model = "Nokia N900";
- compatible = "nokia,omap3-n900", "ti,omap3";
+ compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3";
cpus {
cpu@0 {
diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts
index b076a52..261c558 100644
--- a/arch/arm/boot/dts/omap3-n950.dts
+++ b/arch/arm/boot/dts/omap3-n950.dts
@@ -14,5 +14,5 @@
/ {
model = "Nokia N950";
- compatible = "nokia,omap3-n950", "ti,omap3";
+ compatible = "nokia,omap3-n950", "ti,omap36xx", "ti,omap3";
};
diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobi.dts b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts
new file mode 100644
index 0000000..966b5c9
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Tobi expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include "omap3-overo-tobi-common.dtsi"
+
+/ {
+ model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Tobi";
+ compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
+};
+
diff --git a/arch/arm/boot/dts/omap3-tobi.dts b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
similarity index 93%
rename from arch/arm/boot/dts/omap3-tobi.dts
rename to arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
index 7e4ad2a..4edc013 100644
--- a/arch/arm/boot/dts/omap3-tobi.dts
+++ b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
@@ -13,9 +13,6 @@
#include "omap3-overo.dtsi"
/ {
- model = "TI OMAP3 Gumstix Overo on Tobi";
- compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3";
-
leds {
compatible = "gpio-leds";
heartbeat {
diff --git a/arch/arm/boot/dts/omap3-overo-tobi.dts b/arch/arm/boot/dts/omap3-overo-tobi.dts
new file mode 100644
index 0000000..de5653e
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-tobi.dts
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Tobi expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+#include "omap3-overo-tobi-common.dtsi"
+
+/ {
+ model = "OMAP35xx Gumstix Overo on Tobi";
+ compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi
index a461d2f..5970999 100644
--- a/arch/arm/boot/dts/omap3-overo.dtsi
+++ b/arch/arm/boot/dts/omap3-overo.dtsi
@@ -9,9 +9,6 @@
/*
* The Gumstix Overo must be combined with an expansion board.
*/
-/dts-v1/;
-
-#include "omap34xx.dtsi"
/ {
pwmleds {
diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
index 389e987..44ec401 100644
--- a/arch/arm/boot/dts/tegra114.dtsi
+++ b/arch/arm/boot/dts/tegra114.dtsi
@@ -57,6 +57,8 @@
resets = <&tegra_car 27>;
reset-names = "dc";
+ nvidia,head = <0>;
+
rgb {
status = "disabled";
};
@@ -72,6 +74,8 @@
resets = <&tegra_car 26>;
reset-names = "dc";
+ nvidia,head = <1>;
+
rgb {
status = "disabled";
};
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 480ecda..48d2a7f 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -94,6 +94,8 @@
resets = <&tegra_car 27>;
reset-names = "dc";
+ nvidia,head = <0>;
+
rgb {
status = "disabled";
};
@@ -109,6 +111,8 @@
resets = <&tegra_car 26>;
reset-names = "dc";
+ nvidia,head = <1>;
+
rgb {
status = "disabled";
};
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index 9104224..1e156d9 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -28,7 +28,7 @@
compatible = "nvidia,cardhu", "nvidia,tegra30";
aliases {
- rtc0 = "/i2c@7000d000/tps6586x@34";
+ rtc0 = "/i2c@7000d000/tps65911@2d";
rtc1 = "/rtc@7000e000";
};
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index ed8e770..19a84e9 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -170,6 +170,8 @@
resets = <&tegra_car 27>;
reset-names = "dc";
+ nvidia,head = <0>;
+
rgb {
status = "disabled";
};
@@ -185,6 +187,8 @@
resets = <&tegra_car 26>;
reset-names = "dc";
+ nvidia,head = <1>;
+
rgb {
status = "disabled";
};
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index befcaf5..ec41964 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -101,11 +101,9 @@
obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o
obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o
-ifeq ($(CONFIG_PM),y)
obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o
# i.MX6SL reuses i.MX6Q code
obj-$(CONFIG_SOC_IMX6SL) += pm-imx6q.o headsmp.o
-endif
# i.MX5 based machines
obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 59c3b9b..baf439d 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -144,13 +144,11 @@
void imx_cpu_die(unsigned int cpu);
int imx_cpu_kill(unsigned int cpu);
-#ifdef CONFIG_PM
void imx6q_pm_init(void);
void imx6q_pm_set_ccm_base(void __iomem *base);
+#ifdef CONFIG_PM
void imx5_pm_init(void);
#else
-static inline void imx6q_pm_init(void) {}
-static inline void imx6q_pm_set_ccm_base(void __iomem *base) {}
static inline void imx5_pm_init(void) {}
#endif
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 91449c5..85089d8 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -156,6 +156,7 @@
.register_dev = 1,
.hmc_mode = 16,
.pins[0] = 6,
+ .extcon = "tahvo-usb",
};
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index e2ce4f8..0af7ca0 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -50,6 +50,7 @@
bool "TI OMAP5"
depends on ARCH_MULTI_V7
select ARCH_OMAP2PLUS
+ select ARCH_HAS_OPP
select ARM_CPU_SUSPEND if PM
select ARM_GIC
select CPU_V7
@@ -63,6 +64,7 @@
bool "TI AM33XX"
depends on ARCH_MULTI_V7
select ARCH_OMAP2PLUS
+ select ARCH_HAS_OPP
select ARM_CPU_SUSPEND if PM
select CPU_V7
select MULTI_IRQ_HANDLER
@@ -72,6 +74,7 @@
depends on ARCH_MULTI_V7
select CPU_V7
select ARCH_OMAP2PLUS
+ select ARCH_HAS_OPP
select MULTI_IRQ_HANDLER
select ARM_GIC
select MACH_OMAP_GENERIC
@@ -80,6 +83,7 @@
bool "TI DRA7XX"
depends on ARCH_MULTI_V7
select ARCH_OMAP2PLUS
+ select ARCH_HAS_OPP
select ARM_CPU_SUSPEND if PM
select ARM_GIC
select CPU_V7
@@ -268,9 +272,6 @@
default y
select OMAP_PACKAGE_CBB
-config MACH_NOKIA_N800
- bool
-
config MACH_NOKIA_N810
bool
@@ -281,7 +282,6 @@
bool "Nokia N800/N810"
depends on SOC_OMAP2420
default y
- select MACH_NOKIA_N800
select MACH_NOKIA_N810
select MACH_NOKIA_N810_WIMAX
select OMAP_PACKAGE_ZAC
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index d24926e..ab43755 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -1339,7 +1339,7 @@
of_property_read_bool(np, "gpmc,time-para-granularity");
}
-#ifdef CONFIG_MTD_NAND
+#if IS_ENABLED(CONFIG_MTD_NAND)
static const char * const nand_xfer_types[] = {
[NAND_OMAP_PREFETCH_POLLED] = "prefetch-polled",
@@ -1429,7 +1429,7 @@
}
#endif
-#ifdef CONFIG_MTD_ONENAND
+#if IS_ENABLED(CONFIG_MTD_ONENAND)
static int gpmc_probe_onenand_child(struct platform_device *pdev,
struct device_node *child)
{
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index d408b15..af432b1 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -179,15 +179,6 @@
.length = L4_EMU_34XX_SIZE,
.type = MT_DEVICE
},
-#if defined(CONFIG_DEBUG_LL) && \
- (defined(CONFIG_MACH_OMAP_ZOOM2) || defined(CONFIG_MACH_OMAP_ZOOM3))
- {
- .virtual = ZOOM_UART_VIRT,
- .pfn = __phys_to_pfn(ZOOM_UART_BASE),
- .length = SZ_1M,
- .type = MT_DEVICE
- },
-#endif
};
#endif
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index f70583f..29997bd 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -38,6 +38,7 @@
#include <linux/mtd/physmap.h>
#include <linux/usb/gpio_vbus.h>
#include <linux/reboot.h>
+#include <linux/regulator/fixed.h>
#include <linux/regulator/max1586.h>
#include <linux/slab.h>
#include <linux/i2c/pxa-i2c.h>
@@ -714,6 +715,10 @@
{ GPIO56_MT9M111_nOE, GPIOF_OUT_INIT_LOW, "Camera nOE" },
};
+static struct regulator_consumer_supply fixed_5v0_consumers[] = {
+ REGULATOR_SUPPLY("power", "pwm-backlight"),
+};
+
static void __init mioa701_machine_init(void)
{
int rc;
@@ -753,6 +758,10 @@
pxa_set_i2c_info(&i2c_pdata);
pxa27x_set_i2c_power_info(NULL);
pxa_set_camera_info(&mioa701_pxacamera_platform_data);
+
+ regulator_register_always_on(0, "fixed-5.0V", fixed_5v0_consumers,
+ ARRAY_SIZE(fixed_5v0_consumers),
+ 5000000);
}
static void mioa701_machine_exit(void)
diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c
index 303a285..6191603 100644
--- a/arch/arm/mach-tegra/tegra.c
+++ b/arch/arm/mach-tegra/tegra.c
@@ -73,10 +73,20 @@
static void __init tegra_init_cache(void)
{
#ifdef CONFIG_CACHE_L2X0
+ static const struct of_device_id pl310_ids[] __initconst = {
+ { .compatible = "arm,pl310-cache", },
+ {}
+ };
+
+ struct device_node *np;
int ret;
void __iomem *p = IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x3000;
u32 aux_ctrl, cache_type;
+ np = of_find_matching_node(NULL, pl310_ids);
+ if (!np)
+ return;
+
cache_type = readl(p + L2X0_CACHE_TYPE);
aux_ctrl = (cache_type & 0x700) << (17-8);
aux_ctrl |= 0x7C400001;
