| #ifndef __ASM_SH_RENESAS_SH7785LCR_H |
| #define __ASM_SH_RENESAS_SH7785LCR_H |
| |
| /* |
| * This board has 2 physical memory maps. |
| * It can be changed with DIP switch(S2-5). |
| * |
| * phys address | S2-5 = OFF | S2-5 = ON |
| * -----------------------------+---------------+--------------- |
| * 0x00000000 - 0x03ffffff(CS0) | NOR Flash | NOR Flash |
| * 0x04000000 - 0x05ffffff(CS1) | PLD | PLD |
| * 0x06000000 - 0x07ffffff(CS1) | I2C | I2C |
| * 0x08000000 - 0x0bffffff(CS2) | USB | DDR SDRAM |
| * 0x0c000000 - 0x0fffffff(CS3) | SD | DDR SDRAM |
| * 0x10000000 - 0x13ffffff(CS4) | SM107 | SM107 |
| * 0x14000000 - 0x17ffffff(CS5) | reserved | USB |
| * 0x18000000 - 0x1bffffff(CS6) | reserved | SD |
| * 0x40000000 - 0x5fffffff | DDR SDRAM | (cannot use) |
| * |
| */ |
| |
| #define NOR_FLASH_ADDR 0x00000000 |
| #define NOR_FLASH_SIZE 0x04000000 |
| |
| #define PLD_BASE_ADDR 0x04000000 |
| #define PLD_PCICR (PLD_BASE_ADDR + 0x00) |
| #define PLD_LCD_BK_CONTR (PLD_BASE_ADDR + 0x02) |
| #define PLD_LOCALCR (PLD_BASE_ADDR + 0x04) |
| #define PLD_POFCR (PLD_BASE_ADDR + 0x06) |
| #define PLD_LEDCR (PLD_BASE_ADDR + 0x08) |
| #define PLD_SWSR (PLD_BASE_ADDR + 0x0a) |
| #define PLD_VERSR (PLD_BASE_ADDR + 0x0c) |
| #define PLD_MMSR (PLD_BASE_ADDR + 0x0e) |
| |
| #define PCA9564_ADDR 0x06000000 /* I2C */ |
| #define PCA9564_SIZE 0x00000100 |
| |
| #define PCA9564_PROTO_32BIT_ADDR 0x14000000 |
| |
| #define SM107_MEM_ADDR 0x10000000 |
| #define SM107_MEM_SIZE 0x00e00000 |
| #define SM107_REG_ADDR 0x13e00000 |
| #define SM107_REG_SIZE 0x00200000 |
| |
| #if defined(CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS) |
| #define R8A66597_ADDR 0x14000000 /* USB */ |
| #define CG200_ADDR 0x18000000 /* SD */ |
| #else |
| #define R8A66597_ADDR 0x08000000 |
| #define CG200_ADDR 0x0c000000 |
| #endif |
| |
| #define R8A66597_SIZE 0x00000100 |
| #define CG200_SIZE 0x00010000 |
| |
| #endif /* __ASM_SH_RENESAS_SH7785LCR_H */ |
| |
