Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input fixes from Dmitry Torokhov:
 "Updates for the input subsystem.

  The main change is that we tell joydev not to touch "absolute mice",
  such as VMware virtual mouse, as that produced bad result (cursor
  stuck in upper right corner) with games"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: smtpe-ts - wait 50mS until polling for pen-up
  Input: smtpe-ts - use msecs_to_jiffies() instead of HZ
  Input: joydev - don't classify the vmmouse as a joystick
  Input: vmmouse - do not reference non-existing version of X driver
  Input: alps - fix finger jumps on lifting 2 fingers on v7 touchpad
  Input: elantech - fix semi-mt protocol for v3 HW
  Input: sx8654 - fix memory allocation check
diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c
index f362883..1d247bc 100644
--- a/drivers/input/joydev.c
+++ b/drivers/input/joydev.c
@@ -747,6 +747,63 @@
 		input_close_device(handle);
 }
 
+static bool joydev_dev_is_absolute_mouse(struct input_dev *dev)
+{
+	DECLARE_BITMAP(jd_scratch, KEY_CNT);
+
+	BUILD_BUG_ON(ABS_CNT > KEY_CNT || EV_CNT > KEY_CNT);
+
+	/*
+	 * Virtualization (VMware, etc) and remote management (HP
+	 * ILO2) solutions use absolute coordinates for their virtual
+	 * pointing devices so that there is one-to-one relationship
+	 * between pointer position on the host screen and virtual
+	 * guest screen, and so their mice use ABS_X, ABS_Y and 3
+	 * primary button events. This clashes with what joydev
+	 * considers to be joysticks (a device with at minimum ABS_X
+	 * axis).
+	 *
+	 * Here we are trying to separate absolute mice from
+	 * joysticks. A device is, for joystick detection purposes,
+	 * considered to be an absolute mouse if the following is
+	 * true:
+	 *
+	 * 1) Event types are exactly EV_ABS, EV_KEY and EV_SYN.
+	 * 2) Absolute events are exactly ABS_X and ABS_Y.
+	 * 3) Keys are exactly BTN_LEFT, BTN_RIGHT and BTN_MIDDLE.
+	 * 4) Device is not on "Amiga" bus.
+	 */
+
+	bitmap_zero(jd_scratch, EV_CNT);
+	__set_bit(EV_ABS, jd_scratch);
+	__set_bit(EV_KEY, jd_scratch);
+	__set_bit(EV_SYN, jd_scratch);
+	if (!bitmap_equal(jd_scratch, dev->evbit, EV_CNT))
+		return false;
+
+	bitmap_zero(jd_scratch, ABS_CNT);
+	__set_bit(ABS_X, jd_scratch);
+	__set_bit(ABS_Y, jd_scratch);
+	if (!bitmap_equal(dev->absbit, jd_scratch, ABS_CNT))
+		return false;
+
+	bitmap_zero(jd_scratch, KEY_CNT);
+	__set_bit(BTN_LEFT, jd_scratch);
+	__set_bit(BTN_RIGHT, jd_scratch);
+	__set_bit(BTN_MIDDLE, jd_scratch);
+
+	if (!bitmap_equal(dev->keybit, jd_scratch, KEY_CNT))
+		return false;
+
+	/*
+	 * Amiga joystick (amijoy) historically uses left/middle/right
+	 * button events.
+	 */
+	if (dev->id.bustype == BUS_AMIGA)
+		return false;
+
+	return true;
+}
 
 static bool joydev_match(struct input_handler *handler, struct input_dev *dev)
 {
@@ -758,6 +815,10 @@
 	if (test_bit(EV_KEY, dev->evbit) && test_bit(BTN_DIGI, dev->keybit))
 		return false;
 
+	/* Avoid absolute mice */
+	if (joydev_dev_is_absolute_mouse(dev))
+		return false;
+
 	return true;
 }
 
diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
index 7462d2f..d7820d1 100644
--- a/drivers/input/mouse/Kconfig
+++ b/drivers/input/mouse/Kconfig
@@ -156,7 +156,7 @@
 	  Say Y here if you are running under control of VMware hypervisor
 	  (ESXi, Workstation or Fusion). Also make sure that when you enable
 	  this option, you remove the xf86-input-vmmouse user-space driver
-	  or upgrade it to at least xf86-input-vmmouse 13.0.1, which doesn't
+	  or upgrade it to at least xf86-input-vmmouse 13.1.0, which doesn't
 	  load in the presence of an in-kernel vmmouse driver.
 
 	  If unsure, say N.
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index e6708f6..7752bd5 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -941,6 +941,11 @@
 	case V7_PACKET_ID_TWO:
 		mt[1].x &= ~0x000F;
 		mt[1].y |= 0x000F;
+		/* Detect false-postive touches where x & y report max value */
+		if (mt[1].y == 0x7ff && mt[1].x == 0xff0) {
+			mt[1].x = 0;
+			/* y gets set to 0 at the end of this function */
+		}
 		break;
 
 	case V7_PACKET_ID_MULTI:
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index 991dc6b..79363b6 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -315,7 +315,7 @@
 					 unsigned int x2, unsigned int y2)
 {
 	elantech_set_slot(dev, 0, num_fingers != 0, x1, y1);
-	elantech_set_slot(dev, 1, num_fingers == 2, x2, y2);
+	elantech_set_slot(dev, 1, num_fingers >= 2, x2, y2);
 }
 
 /*
diff --git a/drivers/input/touchscreen/stmpe-ts.c b/drivers/input/touchscreen/stmpe-ts.c
index 2d5ff86b..e4c3125 100644
--- a/drivers/input/touchscreen/stmpe-ts.c
+++ b/drivers/input/touchscreen/stmpe-ts.c
@@ -164,7 +164,7 @@
 			STMPE_TSC_CTRL_TSC_EN, STMPE_TSC_CTRL_TSC_EN);
 
 	/* start polling for touch_det to detect release */
-	schedule_delayed_work(&ts->work, HZ / 50);
+	schedule_delayed_work(&ts->work, msecs_to_jiffies(50));
 
 	return IRQ_HANDLED;
 }
diff --git a/drivers/input/touchscreen/sx8654.c b/drivers/input/touchscreen/sx8654.c
index aecb9ad..642f4a5 100644
--- a/drivers/input/touchscreen/sx8654.c
+++ b/drivers/input/touchscreen/sx8654.c
@@ -187,7 +187,7 @@
 		return -ENOMEM;
 
 	input = devm_input_allocate_device(&client->dev);
-	if (!sx8654)
+	if (!input)
 		return -ENOMEM;
 
 	input->name = "SX8654 I2C Touchscreen";