arm64: dts: qcom: Add initial set of PMIC and SoC pins for APQ8016 SBC board
Add initial device configuration nodes for APQ8016 and PM8916 GPIO's.
Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
new file mode 100644
index 0000000..535532b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
@@ -0,0 +1,30 @@
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+&pm8916_gpios {
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pm8916_gpios_default>;
+
+ pm8916_gpios_default: default {
+ usb_hub_reset_pm {
+ pins = "gpio1";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ output-low;
+ };
+ usb_sw_sel_pm {
+ pins = "gpio2";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ input-disable;
+ };
+ usr_led_3_ctrl {
+ pins = "gpio3";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ output-low;
+ };
+ usr_led_4_ctrl {
+ pins = "gpio4";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ output-low;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi
new file mode 100644
index 0000000..5f7023f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi
@@ -0,0 +1,21 @@
+
+#include <dt-bindings/gpio/gpio.h>
+
+&msmgpio {
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&soc_gpios_default>;
+
+ soc_gpios_default: default {
+ usr_led_1_ctrl_default: usr_led_1_ctrl_default {
+ pins = "gpio21";
+ function = "gpio";
+ output-low;
+ };
+ usr_led_2_ctrl_default: usr_led_2_ctrl_default {
+ pins = "gpio120";
+ function = "gpio";
+ output-low;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 58f0055..98abece 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -13,6 +13,8 @@
#include "msm8916.dtsi"
#include "pm8916.dtsi"
+#include "apq8016-sbc-soc-pins.dtsi"
+#include "apq8016-sbc-pmic-pins.dtsi"
/ {
aliases {
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 7887588..0f49ebd 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -82,7 +82,7 @@
reg = <0x4ab000 0x4>;
};
- pinctrl@1000000 {
+ msmgpio: pinctrl@1000000 {
compatible = "qcom,msm8916-pinctrl";
reg = <0x1000000 0x300000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
