| |
| /* |
| * |
| Copyright (c) Eicon Networks, 2002. |
| * |
| This source file is supplied for the use with |
| Eicon Networks range of DIVA Server Adapters. |
| * |
| Eicon File Revision : 2.1 |
| * |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2, or (at your option) |
| any later version. |
| * |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER INCLUDING ANY |
| implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. |
| See the GNU General Public License for more details. |
| * |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| */ |
| /*---------------------------------------------------------------------------- |
| // MAESTRA ISA PnP */ |
| #define BRI_MEMORY_BASE 0x1f700000 |
| #define BRI_MEMORY_SIZE 0x00100000 /* 1MB on the BRI */ |
| #define BRI_SHARED_RAM_SIZE 0x00010000 /* 64k shared RAM */ |
| #define BRI_RAY_TAYLOR_DSP_CODE_SIZE 0x00020000 /* max 128k DSP-Code (Ray Taylor's code) */ |
| #define BRI_ORG_MAX_DSP_CODE_SIZE 0x00050000 /* max 320k DSP-Code (Telindus) */ |
| #define BRI_V90D_MAX_DSP_CODE_SIZE 0x00060000 /* max 384k DSP-Code if V.90D included */ |
| #define BRI_CACHED_ADDR(x) (((x) & 0x1fffffffL) | 0x80000000L) |
| #define BRI_UNCACHED_ADDR(x) (((x) & 0x1fffffffL) | 0xa0000000L) |
| #define ADDR 4 |
| #define ADDRH 6 |
| #define DATA 0 |
| #define RESET 7 |
| #define DEFAULT_ADDRESS 0x240 |
| #define DEFAULT_IRQ 3 |
| #define M_PCI_ADDR 0x04 /* MAESTRA BRI PCI */ |
| #define M_PCI_ADDRH 0x0c /* MAESTRA BRI PCI */ |
| #define M_PCI_DATA 0x00 /* MAESTRA BRI PCI */ |
| #define M_PCI_RESET 0x10 /* MAESTRA BRI PCI */ |
| /*---------------------------------------------------------------------------- |
| // MAESTRA PRI PCI */ |
| #define MP_IRQ_RESET 0xc18 /* offset of isr in the CONFIG memory bar */ |
| #define MP_IRQ_RESET_VAL 0xfe /* value to clear an interrupt */ |
| #define MP_MEMORY_SIZE 0x00400000 /* 4MB on standard PRI */ |
| #define MP2_MEMORY_SIZE 0x00800000 /* 8MB on PRI Rev. 2 */ |
| #define MP_SHARED_RAM_OFFSET 0x00001000 /* offset of shared RAM base in the DRAM memory bar */ |
| #define MP_SHARED_RAM_SIZE 0x00010000 /* 64k shared RAM */ |
| #define MP_PROTOCOL_OFFSET (MP_SHARED_RAM_OFFSET + MP_SHARED_RAM_SIZE) |
| #define MP_RAY_TAYLOR_DSP_CODE_SIZE 0x00040000 /* max 256k DSP-Code (Ray Taylor's code) */ |
| #define MP_ORG_MAX_DSP_CODE_SIZE 0x00060000 /* max 384k DSP-Code (Telindus) */ |
| #define MP_V90D_MAX_DSP_CODE_SIZE 0x00070000 /* max 448k DSP-Code if V.90D included) */ |
| #define MP_VOIP_MAX_DSP_CODE_SIZE 0x00090000 /* max 576k DSP-Code if voice over IP included */ |
| #define MP_CACHED_ADDR(x) (((x) & 0x1fffffffL) | 0x80000000L) |
| #define MP_UNCACHED_ADDR(x) (((x) & 0x1fffffffL) | 0xa0000000L) |
| #define MP_RESET 0x20 /* offset of RESET register in the DEVICES memory bar */ |
| /* RESET register bits */ |
| #define _MP_S2M_RESET 0x10 /* active lo */ |
| #define _MP_LED2 0x08 /* 1 = on */ |
| #define _MP_LED1 0x04 /* 1 = on */ |
| #define _MP_DSP_RESET 0x02 /* active lo */ |
| #define _MP_RISC_RESET 0x81 /* active hi, bit 7 for compatibility with old boards */ |
| /* CPU exception context structure in MP shared ram after trap */ |
| typedef struct mp_xcptcontext_s MP_XCPTC; |
| struct mp_xcptcontext_s { |
| dword sr; |
| dword cr; |
| dword epc; |
| dword vaddr; |
| dword regs[32]; |
| dword mdlo; |
| dword mdhi; |
| dword reseverd; |
| dword xclass; |
| }; |
| /* boot interface structure for PRI */ |
| struct mp_load { |
| dword volatile cmd; |
| dword volatile addr; |
| dword volatile len; |
| dword volatile err; |
| dword volatile live; |
| dword volatile res1[0x1b]; |
| dword volatile TrapId; /* has value 0x999999XX on a CPU trap */ |
| dword volatile res2[0x03]; |
| MP_XCPTC volatile xcpt; /* contains register dump */ |
| dword volatile rest[((0x1020>>2)-6) - 0x1b - 1 - 0x03 - (sizeof(MP_XCPTC)>>2)]; |
| dword volatile signature; |
| dword data[60000]; /* real interface description */ |
| }; |
| /*----------------------------------------------------------------------------*/ |
| /* SERVER 4BRI (Quattro PCI) */ |
| #define MQ_BOARD_REG_OFFSET 0x800000 /* PC relative On board registers offset */ |
| #define MQ_BREG_RISC 0x1200 /* RISC Reset ect */ |
| #define MQ_RISC_COLD_RESET_MASK 0x0001 /* RISC Cold reset */ |
| #define MQ_RISC_WARM_RESET_MASK 0x0002 /* RISC Warm reset */ |
| #define MQ_BREG_IRQ_TEST 0x0608 /* Interrupt request, no CPU interaction */ |
| #define MQ_IRQ_REQ_ON 0x1 |
| #define MQ_IRQ_REQ_OFF 0x0 |
| #define MQ_BOARD_DSP_OFFSET 0xa00000 /* PC relative On board DSP regs offset */ |
| #define MQ_DSP1_ADDR_OFFSET 0x0008 /* Addr register offset DSP 1 subboard 1 */ |
| #define MQ_DSP2_ADDR_OFFSET 0x0208 /* Addr register offset DSP 2 subboard 1 */ |
| #define MQ_DSP1_DATA_OFFSET 0x0000 /* Data register offset DSP 1 subboard 1 */ |
| #define MQ_DSP2_DATA_OFFSET 0x0200 /* Data register offset DSP 2 subboard 1 */ |
| #define MQ_DSP_JUNK_OFFSET 0x0400 /* DSP Data/Addr regs subboard offset */ |
| #define MQ_ISAC_DSP_RESET 0x0028 /* ISAC and DSP reset address offset */ |
| #define MQ_BOARD_ISAC_DSP_RESET 0x800028 /* ISAC and DSP reset address offset */ |
| #define MQ_INSTANCE_COUNT 4 /* 4BRI consists of four instances */ |
| #define MQ_MEMORY_SIZE 0x00400000 /* 4MB on standard 4BRI */ |
| #define MQ_CTRL_SIZE 0x00002000 /* 8K memory mapped registers */ |
| #define MQ_SHARED_RAM_SIZE 0x00010000 /* 64k shared RAM */ |
| #define MQ_ORG_MAX_DSP_CODE_SIZE 0x00050000 /* max 320k DSP-Code (Telindus) */ |
| #define MQ_V90D_MAX_DSP_CODE_SIZE 0x00060000 /* max 384K DSP-Code if V.90D included */ |
| #define MQ_VOIP_MAX_DSP_CODE_SIZE 0x00028000 /* max 4*160k = 640K DSP-Code if voice over IP included */ |
| #define MQ_CACHED_ADDR(x) (((x) & 0x1fffffffL) | 0x80000000L) |
| #define MQ_UNCACHED_ADDR(x) (((x) & 0x1fffffffL) | 0xa0000000L) |
| /*--------------------------------------------------------------------------------------------*/ |
| /* Additional definitions reflecting the different address map of the SERVER 4BRI V2 */ |
| #define MQ2_BREG_RISC 0x0200 /* RISC Reset ect */ |
| #define MQ2_BREG_IRQ_TEST 0x0400 /* Interrupt request, no CPU interaction */ |
| #define MQ2_BOARD_DSP_OFFSET 0x800000 /* PC relative On board DSP regs offset */ |
| #define MQ2_DSP1_DATA_OFFSET 0x1800 /* Data register offset DSP 1 subboard 1 */ |
| #define MQ2_DSP1_ADDR_OFFSET 0x1808 /* Addr register offset DSP 1 subboard 1 */ |
| #define MQ2_DSP2_DATA_OFFSET 0x1810 /* Data register offset DSP 2 subboard 1 */ |
| #define MQ2_DSP2_ADDR_OFFSET 0x1818 /* Addr register offset DSP 2 subboard 1 */ |
| #define MQ2_DSP_JUNK_OFFSET 0x1000 /* DSP Data/Addr regs subboard offset */ |
| #define MQ2_ISAC_DSP_RESET 0x0000 /* ISAC and DSP reset address offset */ |
| #define MQ2_BOARD_ISAC_DSP_RESET 0x800000 /* ISAC and DSP reset address offset */ |
| #define MQ2_IPACX_CONFIG 0x0300 /* IPACX Configuration TE(0)/NT(1) */ |
| #define MQ2_BOARD_IPACX_CONFIG 0x800300 /* "" */ |
| #define MQ2_MEMORY_SIZE 0x01000000 /* 16MB code/data memory */ |
| #define MQ2_CTRL_SIZE 0x00008000 /* 32K memory mapped registers */ |
| /*----------------------------------------------------------------------------*/ |
| /* SERVER BRI 2M/2F as derived from 4BRI V2 */ |
| #define BRI2_MEMORY_SIZE 0x00800000 /* 8MB code/data memory */ |
| #define BRI2_PROTOCOL_MEMORY_SIZE (MQ2_MEMORY_SIZE >> 2) /* same as one 4BRI Rev.2 task */ |
| #define BRI2_CTRL_SIZE 0x00008000 /* 32K memory mapped registers */ |
| #define M_INSTANCE_COUNT 1 /* BRI consists of one instance */ |
| /* |
| * Some useful constants for proper initialization of the GT6401x |
| */ |
| #define ID_REG 0x0000 /*Pci reg-contain the Dev&Ven ID of the card*/ |
| #define RAS0_BASEREG 0x0010 /*Ras0 register - contain the base addr Ras0*/ |
| #define RAS2_BASEREG 0x0014 |
| #define CS_BASEREG 0x0018 |
| #define BOOT_BASEREG 0x001c |
| #define GTREGS_BASEREG 0x0024 /*GTRegsBase reg-contain the base addr where*/ |
| /*the GT64010 internal regs where mapped */ |
| /* |
| * GT64010 internal registers |
| */ |
| /* DRAM device coding */ |
| #define LOW_RAS0_DREG 0x0400 /*Ras0 low decode address*/ |
| #define HI_RAS0_DREG 0x0404 /*Ras0 high decode address*/ |
| #define LOW_RAS1_DREG 0x0408 /*Ras1 low decode address*/ |
| #define HI_RAS1_DREG 0x040c /*Ras1 high decode address*/ |
| #define LOW_RAS2_DREG 0x0410 /*Ras2 low decode address*/ |
| #define HI_RAS2_DREG 0x0414 /*Ras2 high decode address*/ |
| #define LOW_RAS3_DREG 0x0418 /*Ras3 low decode address*/ |
| #define HI_RAS3_DREG 0x041c /*Ras3 high decode address*/ |
| /* I/O CS device coding */ |
| #define LOW_CS0_DREG 0x0420 /* CS0* low decode register */ |
| #define HI_CS0_DREG 0x0424 /* CS0* high decode register */ |
| #define LOW_CS1_DREG 0x0428 /* CS1* low decode register */ |
| #define HI_CS1_DREG 0x042c /* CS1* high decode register */ |
| #define LOW_CS2_DREG 0x0430 /* CS2* low decode register */ |
| #define HI_CS2_DREG 0x0434 /* CS2* high decode register */ |
| #define LOW_CS3_DREG 0x0438 /* CS3* low decode register */ |
| #define HI_CS3_DREG 0x043c /* CS3* high decode register */ |
| /* Boot PROM device coding */ |
| #define LOW_BOOTCS_DREG 0x0440 /* Boot CS low decode register */ |
| #define HI_BOOTCS_DREG 0x0444 /* Boot CS High decode register */ |
| /* DRAM group coding (for CPU) */ |
| #define LO_RAS10_GREG 0x0008 /*Ras1..0 group low decode address*/ |
| #define HI_RAS10_GREG 0x0010 /*Ras1..0 group high decode address*/ |
| #define LO_RAS32_GREG 0x0018 /*Ras3..2 group low decode address */ |
| #define HI_RAS32_GREG 0x0020 /*Ras3..2 group high decode address */ |
| /* I/O CS group coding for (CPU) */ |
| #define LO_CS20_GREG 0x0028 /* CS2..0 group low decode register */ |
| #define HI_CS20_GREG 0x0030 /* CS2..0 group high decode register */ |
| #define LO_CS3B_GREG 0x0038 /* CS3 & PROM group low decode register */ |
| #define HI_CS3B_GREG 0x0040 /* CS3 & PROM group high decode register */ |
| /* Galileo specific PCI config. */ |
| #define PCI_TIMEOUT_RET 0x0c04 /* Time Out and retry register */ |
| #define RAS10_BANKSIZE 0x0c08 /* RAS 1..0 group PCI bank size */ |
| #define RAS32_BANKSIZE 0x0c0c /* RAS 3..2 group PCI bank size */ |
| #define CS20_BANKSIZE 0x0c10 /* CS 2..0 group PCI bank size */ |
| #define CS3B_BANKSIZE 0x0c14 /* CS 3 & Boot group PCI bank size */ |
| #define DRAM_SIZE 0x0001 /*Dram size in mega bytes*/ |
| #define PROM_SIZE 0x08000 /*Prom size in bytes*/ |
| /*--------------------------------------------------------------------------*/ |
| #define OFFS_DIVA_INIT_TASK_COUNT 0x68 |
| #define OFFS_DSP_CODE_BASE_ADDR 0x6c |
| #define OFFS_XLOG_BUF_ADDR 0x70 |
| #define OFFS_XLOG_COUNT_ADDR 0x74 |
| #define OFFS_XLOG_OUT_ADDR 0x78 |
| #define OFFS_PROTOCOL_END_ADDR 0x7c |
| #define OFFS_PROTOCOL_ID_STRING 0x80 |
| /*--------------------------------------------------------------------------*/ |
