blob: 4ba2b7a37caef8c90e348e45b65a380510fb808d [file] [log] [blame]
From 770344ff161f01bef753f1c91494910f13590e69 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Date: Mon, 6 Mar 2017 01:35:57 +0200
Subject: [PATCH 229/286] drm: bridge: dw-hdmi: Fix the PHY power up sequence
When powering the PHY up we need to wait for the PLL to lock. This is
done by polling the TX_PHY_LOCK bit in the HDMI_PHY_STAT0 register
(interrupt-based wait could be implemented as well but is likely
overkill). The bit is asserted when the PLL locks, but the current code
incorrectly waits for the bit to be deasserted. Fix it, and while at it,
replace the udelay() with a sleep as the code never runs in
non-sleepable context.
To be consistent with the power down implementation move the poll loop
to the power off function.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170305233557.11945-1-laurent.pinchart+renesas@ideasonboard.com
(cherry picked from commit 181e0ef092a4952aa523c5b9cb21394cf43bcd46)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
drivers/gpu/drm/bridge/dw-hdmi.c | 65 ++++++++++++++++++++++-----------------
1 file changed, 37 insertions(+), 28 deletions(-)
--- a/drivers/gpu/drm/bridge/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/dw-hdmi.c
@@ -949,9 +949,44 @@ static void dw_hdmi_phy_power_off(struct
dw_hdmi_phy_gen2_pddq(hdmi, 1);
}
+static int dw_hdmi_phy_power_on(struct dw_hdmi *hdmi)
+{
+ const struct dw_hdmi_phy_data *phy = hdmi->phy;
+ unsigned int i;
+ u8 val;
+
+ if (phy->gen == 1) {
+ dw_hdmi_phy_enable_powerdown(hdmi, false);
+
+ /* Toggle TMDS enable. */
+ dw_hdmi_phy_enable_tmds(hdmi, 0);
+ dw_hdmi_phy_enable_tmds(hdmi, 1);
+ return 0;
+ }
+
+ dw_hdmi_phy_gen2_txpwron(hdmi, 1);
+ dw_hdmi_phy_gen2_pddq(hdmi, 0);
+
+ /* Wait for PHY PLL lock */
+ for (i = 0; i < 5; ++i) {
+ val = hdmi_readb(hdmi, HDMI_PHY_STAT0) & HDMI_PHY_TX_PHY_LOCK;
+ if (val)
+ break;
+
+ usleep_range(1000, 2000);
+ }
+
+ if (!val) {
+ dev_err(hdmi->dev, "PHY PLL failed to lock\n");
+ return -ETIMEDOUT;
+ }
+
+ dev_dbg(hdmi->dev, "PHY PLL locked %u iterations\n", i);
+ return 0;
+}
+
static int hdmi_phy_configure(struct dw_hdmi *hdmi)
{
- u8 val, msec;
const struct dw_hdmi_plat_data *pdata = hdmi->plat_data;
const struct dw_hdmi_mpll_config *mpll_config = pdata->mpll_cfg;
const struct dw_hdmi_curr_ctrl *curr_ctrl = pdata->cur_ctr;
@@ -1019,33 +1054,7 @@ static int hdmi_phy_configure(struct dw_
hdmi_phy_i2c_write(hdmi, HDMI_3D_TX_PHY_CKCALCTRL_OVERRIDE,
HDMI_3D_TX_PHY_CKCALCTRL);
- dw_hdmi_phy_enable_powerdown(hdmi, false);
-
- /* toggle TMDS enable */
- dw_hdmi_phy_enable_tmds(hdmi, 0);
- dw_hdmi_phy_enable_tmds(hdmi, 1);
-
- /* gen2 tx power on */
- dw_hdmi_phy_gen2_txpwron(hdmi, 1);
- dw_hdmi_phy_gen2_pddq(hdmi, 0);
-
- /* Wait for PHY PLL lock */
- msec = 5;
- do {
- val = hdmi_readb(hdmi, HDMI_PHY_STAT0) & HDMI_PHY_TX_PHY_LOCK;
- if (!val)
- break;
-
- if (msec == 0) {
- dev_err(hdmi->dev, "PHY PLL not locked\n");
- return -ETIMEDOUT;
- }
-
- udelay(1000);
- msec--;
- } while (1);
-
- return 0;
+ return dw_hdmi_phy_power_on(hdmi);
}
static int dw_hdmi_phy_init(struct dw_hdmi *hdmi)