patches.renesas/0181-usb-xhci-Add-port-test-modes-support-for-usb2.patch

From 3021ef9ba9976ecfde9527caace0ee50534191d2 Mon Sep 17 00:00:00 2001
From: Guoqing Zhang <guoqing.zhang@intel.com>
Date: Fri, 7 Apr 2017 17:56:54 +0300
Subject: [PATCH 181/286] usb: xhci: Add port test modes support for usb2.

For usb2 ports, the port test mode Test_J_State, Test_K_State,
Test_Packet, Test_SE0_NAK and Test_Force_En can be enabled
as described in usb2 spec.

USB2 test mode is a required hardware feature for system integrators
validating their hardware according to USB spec, regarding signal
strength and stuff. It is purely a hardware test feature.

Usually you need an oscilloscope and have to enable those test modes on
the hardware. This will send some specific test patterns on D+/D-. There
is no report available (in Linux itself) as it is purely externally
visible. Regular USB usage is not possible at that time.
Anyone (well access to e.g. /dev/bus/usb/001/001 provided) can use it by
sending appropriate USB_PORT_FEAT_TEST requests to the hub.

[Add better commit message by Alexander Stein  -Mathias]
Signed-off-by: Guoqing Zhang <guoqing.zhang@intel.com>
Cc: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

(cherry picked from commit 0f1d832ed1fb9527a4cc5fcb8511e85fd0a85185)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 drivers/usb/host/xhci-hub.c |   85 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/usb/host/xhci.h     |    2 +
 2 files changed, 87 insertions(+)

--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -583,6 +583,77 @@ static void xhci_set_port_power(struct x
 	spin_lock_irqsave(&xhci->lock, flags);
 }
 
+static void xhci_port_set_test_mode(struct xhci_hcd *xhci,
+	u16 test_mode, u16 wIndex)
+{
+	u32 temp;
+	__le32 __iomem *addr;
+
+	/* xhci only supports test mode for usb2 ports, i.e. xhci->main_hcd */
+	addr = xhci_get_port_io_addr(xhci->main_hcd, wIndex);
+	temp = readl(addr + PORTPMSC);
+	temp |= test_mode << PORT_TEST_MODE_SHIFT;
+	writel(temp, addr + PORTPMSC);
+	xhci->test_mode = test_mode;
+	if (test_mode == TEST_FORCE_EN)
+		xhci_start(xhci);
+}
+
+static int xhci_enter_test_mode(struct xhci_hcd *xhci,
+				u16 test_mode, u16 wIndex)
+{
+	int i, retval;
+
+	/* Disable all Device Slots */
+	xhci_dbg(xhci, "Disable all slots\n");
+	for (i = 1; i <= HCS_MAX_SLOTS(xhci->hcs_params1); i++) {
+		retval = xhci_disable_slot(xhci, NULL, i);
+		if (retval)
+			xhci_err(xhci, "Failed to disable slot %d, %d. Enter test mode anyway\n",
+				 i, retval);
+	}
+	/* Put all ports to the Disable state by clear PP */
+	xhci_dbg(xhci, "Disable all port (PP = 0)\n");
+	/* Power off USB3 ports*/
+	for (i = 0; i < xhci->num_usb3_ports; i++)
+		xhci_set_port_power(xhci, xhci->shared_hcd, i, false);
+	/* Power off USB2 ports*/
+	for (i = 0; i < xhci->num_usb2_ports; i++)
+		xhci_set_port_power(xhci, xhci->main_hcd, i, false);
+	/* Stop the controller */
+	xhci_dbg(xhci, "Stop controller\n");
+	retval = xhci_halt(xhci);
+	if (retval)
+		return retval;
+	/* Disable runtime PM for test mode */
+	pm_runtime_forbid(xhci_to_hcd(xhci)->self.controller);
+	/* Set PORTPMSC.PTC field to enter selected test mode */
+	/* Port is selected by wIndex. port_id = wIndex + 1 */
+	xhci_dbg(xhci, "Enter Test Mode: %d, Port_id=%d\n",
+					test_mode, wIndex + 1);
+	xhci_port_set_test_mode(xhci, test_mode, wIndex);
+	return retval;
+}
+
+static int xhci_exit_test_mode(struct xhci_hcd *xhci)
+{
+	int retval;
+
+	if (!xhci->test_mode) {
+		xhci_err(xhci, "Not in test mode, do nothing.\n");
+		return 0;
+	}
+	if (xhci->test_mode == TEST_FORCE_EN &&
+		!(xhci->xhc_state & XHCI_STATE_HALTED)) {
+		retval = xhci_halt(xhci);
+		if (retval)
+			return retval;
+	}
+	pm_runtime_allow(xhci_to_hcd(xhci)->self.controller);
+	xhci->test_mode = 0;
+	return xhci_reset(xhci);
+}
+
 void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array,
 				int port_id, u32 link_state)
 {
@@ -941,6 +1012,7 @@ int xhci_hub_control(struct usb_hcd *hcd
 	u16 link_state = 0;
 	u16 wake_mask = 0;
 	u16 timeout = 0;
+	u16 test_mode = 0;
 
 	max_ports = xhci_get_ports(hcd, &port_array);
 	bus_state = &xhci->bus_state[hcd_index(hcd)];
@@ -1014,6 +1086,8 @@ int xhci_hub_control(struct usb_hcd *hcd
 			link_state = (wIndex & 0xff00) >> 3;
 		if (wValue == USB_PORT_FEAT_REMOTE_WAKE_MASK)
 			wake_mask = wIndex & 0xff00;
+		if (wValue == USB_PORT_FEAT_TEST)
+			test_mode = (wIndex & 0xff00) >> 8;
 		/* The MSB of wIndex is the U1/U2 timeout */
 		timeout = (wIndex & 0xff00) >> 8;
 		wIndex &= 0xff;
@@ -1177,6 +1251,14 @@ int xhci_hub_control(struct usb_hcd *hcd
 			temp |= PORT_U2_TIMEOUT(timeout);
 			writel(temp, port_array[wIndex] + PORTPMSC);
 			break;
+		case USB_PORT_FEAT_TEST:
+			/* 4.19.6 Port Test Modes (USB2 Test Mode) */
+			if (hcd->speed != HCD_USB2)
+				goto error;
+			if (test_mode > TEST_FORCE_EN || test_mode < TEST_J)
+				goto error;
+			retval = xhci_enter_test_mode(xhci, test_mode, wIndex);
+			break;
 		default:
 			goto error;
 		}
@@ -1244,6 +1326,9 @@ int xhci_hub_control(struct usb_hcd *hcd
 		case USB_PORT_FEAT_POWER:
 			xhci_set_port_power(xhci, hcd, wIndex, false);
 			break;
+		case USB_PORT_FEAT_TEST:
+			retval = xhci_exit_test_mode(xhci);
+			break;
 		default:
 			goto error;
 		}
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -425,6 +425,7 @@ struct xhci_op_regs {
 #define	PORT_L1DS_MASK		(0xff << 8)
 #define	PORT_L1DS(p)		(((p) & 0xff) << 8)
 #define	PORT_HLE		(1 << 16)
+#define PORT_TEST_MODE_SHIFT	28
 
 /* USB3 Protocol PORTLI  Port Link Information */
 #define PORT_RX_LANES(p)	(((p) >> 16) & 0xf)
@@ -1846,6 +1847,7 @@ struct xhci_hcd {
 	/* Compliance Mode Recovery Data */
 	struct timer_list	comp_mode_recovery_timer;
 	u32			port_status_u0;
+	u16			test_mode;
 /* Compliance Mode Timer Triggered every 2 seconds */
 #define COMP_MODE_RCVRY_MSECS 2000