blob: d0bfd172ebc2887c35f59be39d702e784858d307 [file] [log] [blame]
From 30bc7176644a8c333af54344268411e3a4aa318c Mon Sep 17 00:00:00 2001
From: Jacopo Mondi <jacopo+renesas@jmondi.org>
Date: Mon, 9 Oct 2017 10:48:34 +0200
Subject: [PATCH 0368/1795] ARM: dts: gr-peach: Add ETHER pin group
Add pin configuration subnode for ETHER pin group.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 349adfbf27269bad4fa6915e77c97a06487266a5)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r7s72100-gr-peach.dts | 39 +++++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/arch/arm/boot/dts/r7s72100-gr-peach.dts b/arch/arm/boot/dts/r7s72100-gr-peach.dts
index 9661d43f5236..eca14e3801ec 100644
--- a/arch/arm/boot/dts/r7s72100-gr-peach.dts
+++ b/arch/arm/boot/dts/r7s72100-gr-peach.dts
@@ -68,6 +68,28 @@
/* P6_2 as RxD2; P6_3 as TxD2 */
pinmux = <RZA1_PINMUX(6, 2, 7)>, <RZA1_PINMUX(6, 3, 7)>;
};
+
+ ether_pins: ether {
+ /* Ethernet on Ports 1,3,5,10 */
+ pinmux = <RZA1_PINMUX(1, 14, 4)>, /* P1_14 = ET_COL */
+ <RZA1_PINMUX(3, 0, 2)>, /* P3_0 = ET_TXCLK */
+ <RZA1_PINMUX(3, 3, 2)>, /* P3_3 = ET_MDIO */
+ <RZA1_PINMUX(3, 4, 2)>, /* P3_4 = ET_RXCLK */
+ <RZA1_PINMUX(3, 5, 2)>, /* P3_5 = ET_RXER */
+ <RZA1_PINMUX(3, 6, 2)>, /* P3_6 = ET_RXDV */
+ <RZA1_PINMUX(5, 9, 2)>, /* P5_9 = ET_MDC */
+ <RZA1_PINMUX(10, 1, 4)>, /* P10_1 = ET_TXER */
+ <RZA1_PINMUX(10, 2, 4)>, /* P10_2 = ET_TXEN */
+ <RZA1_PINMUX(10, 3, 4)>, /* P10_3 = ET_CRS */
+ <RZA1_PINMUX(10, 4, 4)>, /* P10_4 = ET_TXD0 */
+ <RZA1_PINMUX(10, 5, 4)>, /* P10_5 = ET_TXD1 */
+ <RZA1_PINMUX(10, 6, 4)>, /* P10_6 = ET_TXD2 */
+ <RZA1_PINMUX(10, 7, 4)>, /* P10_7 = ET_TXD3 */
+ <RZA1_PINMUX(10, 8, 4)>, /* P10_8 = ET_RXD0 */
+ <RZA1_PINMUX(10, 9, 4)>, /* P10_9 = ET_RXD1 */
+ <RZA1_PINMUX(10, 10, 4)>,/* P10_10 = ET_RXD2 */
+ <RZA1_PINMUX(10, 11, 4)>;/* P10_11 = ET_RXD3 */
+ };
};
&extal_clk {
@@ -88,3 +110,20 @@
status = "okay";
};
+
+&ether {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ether_pins>;
+
+ status = "okay";
+
+ renesas,no-ether-link;
+ phy-handle = <&phy0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+
+ reset-gpios = <&port4 2 GPIO_ACTIVE_LOW>;
+ reset-delay-us = <5>;
+ };
+};
--
2.19.0