From 40476e5e83bb2c993932c9a5cf0ed570bf43c6c1 Mon Sep 17 00:00:00 2001
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Date: Wed, 13 Dec 2017 15:46:59 +0900
Subject: [PATCH 0512/1795] usb: renesas_usbhs: set the mode by using extcon
 state for non-otg channel

The usbhs_rcar3_power_and_pll_ctrl() will be used by non-otg channel
(e.g. R-Car D3) and the previous code has hardcoded as peripheral mode.
So, this patch sets the mode by using extcon state.
If the channel doesn't get any extcon devices, this driver's behavior
is the same as before.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
(cherry picked from commit cd14247d5c14b9b20bb3d3dfcaa899ca22c8dccc)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 drivers/usb/renesas_usbhs/rcar3.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/renesas_usbhs/rcar3.c b/drivers/usb/renesas_usbhs/rcar3.c
index 50e5fb55c8a0..b9a8453a5e68 100644
--- a/drivers/usb/renesas_usbhs/rcar3.c
+++ b/drivers/usb/renesas_usbhs/rcar3.c
@@ -27,6 +27,7 @@
  * Remarks: bit[31:11] and bit[9:6] should be 0
  */
 #define UGCTRL2_RESERVED_3	0x00000001	/* bit[3:0] should be B'0001 */
+#define UGCTRL2_USB0SEL_EHCI	0x00000010
 #define UGCTRL2_USB0SEL_HSUSB	0x00000020
 #define UGCTRL2_USB0SEL_OTG	0x00000030
 #define UGCTRL2_VBUSSEL		0x00000400
@@ -49,6 +50,14 @@ static void usbhs_rcar3_set_ugctrl2(struct usbhs_priv *priv, u32 val)
 	usbhs_write32(priv, UGCTRL2, val | UGCTRL2_RESERVED_3);
 }
 
+static void usbhs_rcar3_set_usbsel(struct usbhs_priv *priv, bool ehci)
+{
+	if (ehci)
+		usbhs_rcar3_set_ugctrl2(priv, UGCTRL2_USB0SEL_EHCI);
+	else
+		usbhs_rcar3_set_ugctrl2(priv, UGCTRL2_USB0SEL_HSUSB);
+}
+
 static int usbhs_rcar3_power_ctrl(struct platform_device *pdev,
 				void __iomem *base, int enable)
 {
@@ -74,10 +83,14 @@ static int usbhs_rcar3_power_and_pll_ctrl(struct platform_device *pdev,
 	struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
 	u32 val;
 	int timeout = 1000;
+	bool is_host = false;
 
 	if (enable) {
 		usbhs_write32(priv, UGCTRL, 0);	/* release PLLRESET */
-		usbhs_rcar3_set_ugctrl2(priv, UGCTRL2_USB0SEL_HSUSB);
+		if (priv->edev)
+			is_host = extcon_get_state(priv->edev, EXTCON_USB_HOST);
+
+		usbhs_rcar3_set_usbsel(priv, is_host);
 
 		usbhs_bset(priv, LPSTS, LPSTS_SUSPM, LPSTS_SUSPM);
 		do {
-- 
2.19.0