blob: 341e1704ba2bf4baa54eeafbaccd91774eac6a1a [file] [log] [blame]
# Hey Emacs this is a -*- makefile-*-
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
prefix = @prefix@
exec_prefix = @exec_prefix@
bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
# The target architecture
ARCH = @ARCH@
OBJDIR = @OBJDIR@
target = @target@
host = @host@
# Compiler for building kexec
CC = @CC@
CPP = @CPP@
LD = @LD@
AS = @AS@
OBJCOPY = @OBJCOPY@
AR = @AR@
# C compiler for binaries to run during the build
BUILD_CC = @BUILD_CC@
BUILD_CFLAGS = @BUILD_CFLAGS@
TARGET_CC = @TARGET_CC@
TARGET_LD = @TARGET_LD@
TARGET_CFLAGS = @TARGET_CFLAGS@
# Base compiler flags. These are extended by the subcomponent-Makefiles
# where necessary.
CPPFLAGS = @CPPFLAGS@ -I$(srcdir)/include -I$(srcdir)/util_lib/include \
-Iinclude/
CFLAGS = @CFLAGS@ -fno-strict-aliasing -Wall -Wstrict-prototypes
ASFLAGS = @ASFLAGS@
LDFLAGS = @LDFLAGS@
LIBS = @LIBS@
# Utilities called by the makefiles
INSTALL = @INSTALL@
MKDIR = @MKDIR@
RM = @RM@
CP = @CP@
LN = @LN@
TAR = @TAR@
RPMBUILD = @RPMBUILD@
SED = @SED@
FIND = @FIND@
XARGS = @XARGS@
DIRNAME = @DIRNAME@
pkgdatadir = $(datadir)/$(PACKAGE_NAME)
pkglibdir = $(libdir)/$(PACKAGE_NAME)
pkgincludedir = $(includedir)/$(PACKAGE_NAME)
# You can specify DESTDIR on the command line to do a add
# a prefix to the install so it doesn't really happen
# Useful for building binary packages
DESTDIR =
srcdir = @srcdir@
VPATH = .:$(srcdir)
# install paths
BUILD_PREFIX:=build
SBINDIR=$(BUILD_PREFIX)/sbin
BINDIR=$(BUILD_PREFIX)/bin
LIBEXECDIR=$(BUILD_PREFIX)/libexec
DATADIR=$(BUILD_PREFIX)/share
SYSCONFDIR=$(BUILD_PREFIX)/etc
SHAREDSTATEDIR=$(BUILD_PREFIX)/com
LOCALSTATEDIR=$(BUILD_PREFIX)/var
LIBDIR=$(BUILD_PREFIX)/lib
INFODIR=$(BUILD_PREFIX)/info
MANDIR=$(BUILD_PREFIX)/man
MAN1DIR=$(MANDIR)/man1
MAN2DIR=$(MANDIR)/man2
MAN3DIR=$(MANDIR)/man3
MAN4DIR=$(MANDIR)/man4
MAN5DIR=$(MANDIR)/man5
MAN6DIR=$(MANDIR)/man6
MAN7DIR=$(MANDIR)/man7
MAN8DIR=$(MANDIR)/man8
INCLUDEDIR=$(BUILD_PREFIX)/include
PKGDATADIR=$(DATADIR)/$(PACKAGE_NAME)
PKGLIBDIR=$(LIBDIR)/$(PACKAGE_NAME)
PKGINCLUDEIR=$(INCLUDEDIR)/$(PACKAGE_NAME)
MAN_PAGES:= kexec/kexec.8
MAN_PAGES+= kdump/kdump.8
BINARIES_i386:= $(SBINDIR)/kexec $(PKGLIBDIR)/kexec_test
BINARIES_x86_64:=$(SBINDIR)/kexec $(PKGLIBDIR)/kexec_test
BINARIES:=$(SBINDIR)/kexec $(SBINDIR)/kdump $(BINARIES_$(ARCH))
TARGETS:=$(BINARIES) $(MAN_PAGES)
all: $(TARGETS)
# generic build rules
%.o: %.c
@$(MKDIR) -p $(@D)
$(COMPILE.c) -MD -o $@ $<
%.o: %.S
@$(MKDIR) -p $(@D)
$(COMPILE.S) -MD -o $@ $<
# collect objects to be removed in 'make clean'
clean =
# collect objects to be removed in 'make clean'
dist = AUTHORS COPYING News TODO Makefile.in configure.ac configure \
kexec-tools.spec.in config/
# utility function for converting a list of files (with extension) to
# file.o (or file.d) format.
objify = $(addsuffix .o, $(basename $(1)))
depify = $(addsuffix .d, $(basename $(1)))
# Documentation
#
include $(srcdir)/doc/Makefile
# Headers
#
include $(srcdir)/include/Makefile
# Utility function library
#
include $(srcdir)/util_lib/Makefile
#
# Stand alone utilities
#
include $(srcdir)/util/Makefile
#
# purgatory (code between kernels)
#
include $(srcdir)/purgatory/Makefile
#
# kexec (linux booting linux)
#
include $(srcdir)/kexec/Makefile
# kdump (read a crashdump from memory)
#
include $(srcdir)/kdump/Makefile
#
# kexec_test (test program)
#
include $(srcdir)/kexec_test/Makefile
SPEC=$(PACKAGE_NAME).spec
GENERATED_SRCS:= $(SPEC)
TARBALL=$(PACKAGE_NAME)-$(PACKAGE_VERSION).tar
TARBALL.gz=$(TARBALL).gz
SRCS:= $(dist)
PSRCS:=$(foreach s, $(SRCS), $(PACKAGE_NAME)-$(PACKAGE_VERSION)/$(s))
PGSRCS:=$(foreach s, $(GENERATED_SRCS), $(PACKAGE_NAME)-$(PACKAGE_VERSION)/$(s))
Makefile: Makefile.in config.status
./config.status
configure: configure.ac
cd $(srcdir) && autoheader && autoconf && rm -rf autom4te.cache
tarball: $(TARBALL.gz)
$(TARBALL): $(SRCS) $(GENERATED_SRCS)
$(RM) -f $(PACKAGE_NAME)-$(PACKAGE_VERSION)
$(LN) -s $(srcdir) $(PACKAGE_NAME)-$(PACKAGE_VERSION)
$(TAR) -cf $@ $(PSRCS)
$(RM) -f $(PACKAGE_NAME)-$(PACKAGE_VERSION)
$(LN) -sf . $(PACKAGE_NAME)-$(PACKAGE_VERSION)
$(TAR) -rf $@ $(PGSRCS)
$(RM) -f $(PACKAGE_NAME)-$(PACKAGE_VERSION)
@echo $(dist)
$(TARBALL.gz): $(TARBALL)
gzip -c < $^ > $@
RPMDIR=rpm
rpm: $(TARBALL)
$(MKDIR) -p $(RPMDIR)/RPM $(RPMDIR)/SRPM $(RPMDIR)/BUILD \
$(RPMDIR)/SPECS $(RPMDIR)/TMP $(RPMDIR)/SOURCES
unset MAKEFLAGS MAKELEVEL; \
$(RPMBUILD) -ta \
--define '_rpmdir $(RPMDIR)/RPM' \
--define '_srcrpmdir $(RPMDIR)/SRPM' \
--define '_builddir $(RPMDIR)/BUILD' \
--define '_specdir $(RPMDIR)/SPECS' \
--define '_tmppath $(RPMDIR)/TMP' \
--define '_sourcedir $(RPMDIR)/SOURCES' \
$(TARBALL)
$(SPEC): kexec-tools.spec.in Makefile
$(SED) -e 's,^Version: $$,Version: $(PACKAGE_VERSION),' $< > $@
echo::
@echo ARCH=$(ARCH)
@echo BINARIES=$(BINARIES)
@echo TARGETS=$(TARGETS)
@echo CC=$(CC)
@echo AR=$(AR)
@echo LD=$(LD)
clean:
$(RM) -f $(clean)
$(RM) -rf rpm build
$(RM) -f $(TARBALL) $(TARBALL.gz)
distclean: dist-clean
dist-clean: clean
$(RM) -f config.log config.status config.cache Makefile include/config.h
$(RM) -f include/config.h.in configure
$(RM) -rf autom4te.cache
install: $(TARGETS)
for file in $(TARGETS) ; do \
if test `$(DIRNAME) $$file` = "$(SBINDIR)" ; then \
$(MKDIR) -p $(DESTDIR)/$(sbindir)/; \
$(INSTALL) -m 755 $$file $(DESTDIR)/$(sbindir)/; \
fi; \
if test `$(DIRNAME) $$file` = "$(BINDIR)" ; then \
$(MKDIR) -p $(DESTDIR)/$(bindir)/; \
$(INSTALL) -m 755 $$file $(DESTDIR)/$(bindir)/; \
fi; \
if test `$(DIRNAME) $$file` = "$(LIBEXECDIR)" ; then \
$(MKDIR) -p $(DESTDIR)/$(libexecdir)/; \
$(INSTALL) -m 755 $$file $(DESTDIR)/$(libexecdir)/; \
fi; \
if test `$(DIRNAME) $$file` = "$(DATADIR)" ; then \
$(MKDIR) -p $(DESTDIR)/$(datadir)/; \
$(INSTALL) -m 644 $$file $(DESTDIR)/$(datadir)/; \
fi; \
if test `$(DIRNAME) $$file` = "$(SYSCONFDIR)" ; then \
$(MKDIR) -p $(DESTDIR)/$(sysconfdir)/; \
$(INSTALL) -m 644 $$file $(DESTDIR)/$(sysconfdir)/; \
fi; \
if test `$(DIRNAME) $$file` = "$(SHAREDSTATEDIR)" ; then \
$(MKDIR) -p $(DESTDIR)/$(sharedstatedir)/; \
$(INSTALL) -m 644 $$file $(DESTDIR)/$(sharedstatedir)/; \
fi; \
if test `$(DIRNAME) $$file` = "$(LOCALSTATEDIR)" ; then \
$(MKDIR) -p $(DESTDIR)/$(localstatedir)/; \
$(INSTALL) -m 644 $$file $(DESTDIR)/$(localstatedir)/; \
fi; \
if test `$(DIRNAME) $$file` = "$(LIBDIR)" ; then \
$(MKDIR) -p $(DESTDIR)/$(libdir)/; \
$(INSTALL) -m 644 $$file $(DESTDIR)/$(libdir)/; \
fi; \
if test `$(DIRNAME) $$file` = "$(INFODIR)" ; then \
$(MKDIR) -p $(DESTDIR)/$(infodir)/; \
$(INSTALL) -m 644 $$file $(DESTDIR)/$(infodir)/; \
fi; \
if test `$(DIRNAME) $$file` = "$(MAN1DIR)" ; then \
$(MKDIR) -p $(DESTDIR)/$(mandir)/man1; \
$(INSTALL) -m 644 $$file $(DESTDIR)/$(mandir)/man1; \
fi; \
if test `$(DIRNAME) $$file` = "$(MAN2DIR)" ; then \
$(MKDIR) -p $(DESTDIR)/$(mandir)/man2; \
$(INSTALL) -m 644 $$file $(DESTDIR)/$(mandir)/man2; \
fi; \
if test `$(DIRNAME) $$file` = "$(MAN3DIR)" ; then \
$(MKDIR) -p $(DESTDIR)/$(mandir)/man3/; \
$(INSTALL) -m 644 $$file $(DESTDIR)/$(mandir)/man3/; \
fi; \
if test `$(DIRNAME) $$file` = "$(MAN4DIR)" ; then \
$(MKDIR) -p $(DESTDIR)/$(mandir)/man4/; \
$(INSTALL) -m 644 $$file $(DESTDIR)/$(mandir)/man4/; \
fi; \
if test `$(DIRNAME) $$file` = "$(MAN5DIR)" ; then \
$(MKDIR) -p $(DESTDIR)/$(mandir)/man5/; \
$(INSTALL) -m 644 $$file $(DESTDIR)/$(mandir)/man5/; \
fi; \
if test `$(DIRNAME) $$file` = "$(MAN6DIR)" ; then \
$(MKDIR) -p $(DESTDIR)/$(mandir)/man6/; \
$(INSTALL) -m 644 $$file $(DESTDIR)/$(mandir)/man6/; \
fi; \
if test `$(DIRNAME) $$file` = "$(MAN7DIR)" ; then \
$(MKDIR) -p $(DESTDIR)/$(mandir)/man7/; \
$(INSTALL) -m 644 $$file $(DESTDIR)/$(mandir)/man7/; \
fi; \
if test `$(DIRNAME) $$file` = "$(MAN8DIR)" ; then \
$(MKDIR) -p $(DESTDIR)/$(mandir)/man8/; \
$(INSTALL) -m 644 $$file $(DESTDIR)/$(mandir)/man8/; \
fi; \
if test `$(DIRNAME) $$file` = "$(INCLUDEDIR)" ; then \
$(MKDIR) -p $(DESTDIR)/$(includedir)/; \
$(INSTALL) -m 644 $$file $(DESTDIR)/$(includedir)/; \
fi; \
if test `$(DIRNAME) $$file` = "$(PKGDATADIR)" ; then \
$(MKDIR) -p $(DESTDIR)/$(pkgdatadir)/; \
$(INSTALL) -m 644 $$file $(DESTDIR)/$(pkgdatadir)/; \
fi; \
if test `$(DIRNAME) $$file` = "$(PKGLIBDIR)" ; then \
$(MKDIR) -p $(DESTDIR)/$(pkglibdir)/; \
$(INSTALL) -m 644 $$file $(DESTDIR)/$(pkglibdir)/; \
fi; \
if test `$(DIRNAME) $$file` = "$(PKGINCLUDEDIR)" ; then \
$(MKDIR) -p $(DESTDIR)/$(pkgincludedir)/; \
$(INSTALL) -m 644 $$file $(DESTDIR)/$(pkgincludedir)/; \
fi; \
done
.PHONY: echo install all clean dist-clean distclean maintainer-clean \
maintainerclean tarball rpm