blob: ff85982464d2e9623a8d5e7109473ebaea01dd88 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
//
// spi-mt7621.c -- MediaTek MT7621 SPI controller driver
//
// Copyright (C) 2011 Sergiy <piratfm@gmail.com>
// Copyright (C) 2011-2013 Gabor Juhos <juhosg@openwrt.org>
// Copyright (C) 2014-2015 Felix Fietkau <nbd@nbd.name>
//
// Some parts are based on spi-orion.c:
// Author: Shadi Ammouri <shadi@marvell.com>
// Copyright (C) 2007-2008 Marvell Ltd.
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/reset.h>
#include <linux/spi/spi.h>
#define DRIVER_NAME "spi-mt7621"
/* in usec */
#define RALINK_SPI_WAIT_MAX_LOOP 2000
/* SPISTAT register bit field */
#define SPISTAT_BUSY BIT(0)
#define MT7621_SPI_TRANS 0x00
#define SPITRANS_BUSY BIT(16)
#define MT7621_SPI_OPCODE 0x04
#define MT7621_SPI_DATA0 0x08
#define MT7621_SPI_DATA4 0x18
#define SPI_CTL_TX_RX_CNT_MASK 0xff
#define SPI_CTL_START BIT(8)
#define MT7621_SPI_MASTER 0x28
#define MASTER_MORE_BUFMODE BIT(2)
#define MASTER_FULL_DUPLEX BIT(10)
#define MASTER_RS_CLK_SEL GENMASK(27, 16)
#define MASTER_RS_CLK_SEL_SHIFT 16
#define MASTER_RS_SLAVE_SEL GENMASK(31, 29)
#define MT7621_SPI_MOREBUF 0x2c
#define MT7621_SPI_POLAR 0x38
#define MT7621_SPI_SPACE 0x3c
#define MT7621_CPHA BIT(5)
#define MT7621_CPOL BIT(4)
#define MT7621_LSB_FIRST BIT(3)
struct mt7621_spi {
struct spi_controller *master;
void __iomem *base;
unsigned int sys_freq;
unsigned int speed;
struct clk *clk;
int pending_write;
};
static inline struct mt7621_spi *spidev_to_mt7621_spi(struct spi_device *spi)
{
return spi_controller_get_devdata(spi->master);
}
static inline u32 mt7621_spi_read(struct mt7621_spi *rs, u32 reg)
{
return ioread32(rs->base + reg);
}
static inline void mt7621_spi_write(struct mt7621_spi *rs, u32 reg, u32 val)
{
iowrite32(val, rs->base + reg);
}
static void mt7621_spi_set_cs(struct spi_device *spi, int enable)
{
struct mt7621_spi *rs = spidev_to_mt7621_spi(spi);
int cs = spi->chip_select;
u32 polar = 0;
u32 master;
/*
* Select SPI device 7, enable "more buffer mode" and disable
* full-duplex (only half-duplex really works on this chip
* reliably)
*/
master = mt7621_spi_read(rs, MT7621_SPI_MASTER);
master |= MASTER_RS_SLAVE_SEL | MASTER_MORE_BUFMODE;
master &= ~MASTER_FULL_DUPLEX;
mt7621_spi_write(rs, MT7621_SPI_MASTER, master);
rs->pending_write = 0;
if (enable)
polar = BIT(cs);
mt7621_spi_write(rs, MT7621_SPI_POLAR, polar);
}
static int mt7621_spi_prepare(struct spi_device *spi, unsigned int speed)
{
struct mt7621_spi *rs = spidev_to_mt7621_spi(spi);
u32 rate;
u32 reg;
dev_dbg(&spi->dev, "speed:%u\n", speed);
rate = DIV_ROUND_UP(rs->sys_freq, speed);
dev_dbg(&spi->dev, "rate-1:%u\n", rate);
if (rate > 4097)
return -EINVAL;
if (rate < 2)
rate = 2;
reg = mt7621_spi_read(rs, MT7621_SPI_MASTER);
reg &= ~MASTER_RS_CLK_SEL;
reg |= (rate - 2) << MASTER_RS_CLK_SEL_SHIFT;
rs->speed = speed;
reg &= ~MT7621_LSB_FIRST;
if (spi->mode & SPI_LSB_FIRST)
reg |= MT7621_LSB_FIRST;
/*
* This SPI controller seems to be tested on SPI flash only and some
* bits are swizzled under other SPI modes probably due to incorrect
* wiring inside the silicon. Only mode 0 works correctly.
*/
reg &= ~(MT7621_CPHA | MT7621_CPOL);
mt7621_spi_write(rs, MT7621_SPI_MASTER, reg);
return 0;
}
static inline int mt7621_spi_wait_till_ready(struct mt7621_spi *rs)
{
int i;
for (i = 0; i < RALINK_SPI_WAIT_MAX_LOOP; i++) {
u32 status;
status = mt7621_spi_read(rs, MT7621_SPI_TRANS);
if ((status & SPITRANS_BUSY) == 0)
return 0;
cpu_relax();
udelay(1);
}
return -ETIMEDOUT;
}
static void mt7621_spi_read_half_duplex(struct mt7621_spi *rs,
int rx_len, u8 *buf)
{
int tx_len;
/*
* Combine with any pending write, and perform one or more half-duplex
* transactions reading 'len' bytes. Data to be written is already in
* MT7621_SPI_DATA.
*/
tx_len = rs->pending_write;
rs->pending_write = 0;
while (rx_len || tx_len) {
int i;
u32 val = (min(tx_len, 4) * 8) << 24;
int rx = min(rx_len, 32);
if (tx_len > 4)
val |= (tx_len - 4) * 8;
val |= (rx * 8) << 12;
mt7621_spi_write(rs, MT7621_SPI_MOREBUF, val);
tx_len = 0;
val = mt7621_spi_read(rs, MT7621_SPI_TRANS);
val |= SPI_CTL_START;
mt7621_spi_write(rs, MT7621_SPI_TRANS, val);
mt7621_spi_wait_till_ready(rs);
for (i = 0; i < rx; i++) {
if ((i % 4) == 0)
val = mt7621_spi_read(rs, MT7621_SPI_DATA0 + i);
*buf++ = val & 0xff;
val >>= 8;
}
rx_len -= i;
}
}
static inline void mt7621_spi_flush(struct mt7621_spi *rs)
{
mt7621_spi_read_half_duplex(rs, 0, NULL);
}
static void mt7621_spi_write_half_duplex(struct mt7621_spi *rs,
int tx_len, const u8 *buf)
{
int len = rs->pending_write;
int val = 0;
if (len & 3) {
val = mt7621_spi_read(rs, MT7621_SPI_OPCODE + (len & ~3));
if (len < 4) {
val <<= (4 - len) * 8;
val = swab32(val);
}
}
while (tx_len > 0) {
if (len >= 36) {
rs->pending_write = len;
mt7621_spi_flush(rs);
len = 0;
}
val |= *buf++ << (8 * (len & 3));
len++;
if ((len & 3) == 0) {
if (len == 4)
/* The byte-order of the opcode is weird! */
val = swab32(val);
mt7621_spi_write(rs, MT7621_SPI_OPCODE + len - 4, val);
val = 0;
}
tx_len -= 1;
}
if (len & 3) {
if (len < 4) {
val = swab32(val);
val >>= (4 - len) * 8;
}
mt7621_spi_write(rs, MT7621_SPI_OPCODE + (len & ~3), val);
}
rs->pending_write = len;
}
static int mt7621_spi_transfer_one_message(struct spi_controller *master,
struct spi_message *m)
{
struct mt7621_spi *rs = spi_controller_get_devdata(master);
struct spi_device *spi = m->spi;
unsigned int speed = spi->max_speed_hz;
struct spi_transfer *t = NULL;
int status = 0;
mt7621_spi_wait_till_ready(rs);
list_for_each_entry(t, &m->transfers, transfer_list)
if (t->speed_hz < speed)
speed = t->speed_hz;
if (mt7621_spi_prepare(spi, speed)) {
status = -EIO;
goto msg_done;
}
/* Assert CS */
mt7621_spi_set_cs(spi, 1);
m->actual_length = 0;
list_for_each_entry(t, &m->transfers, transfer_list) {
if ((t->rx_buf) && (t->tx_buf)) {
/*
* This controller will shift some extra data out
* of spi_opcode if (mosi_bit_cnt > 0) &&
* (cmd_bit_cnt == 0). So the claimed full-duplex
* support is broken since we have no way to read
* the MISO value during that bit.
*/
status = -EIO;
goto msg_done;
} else if (t->rx_buf) {
mt7621_spi_read_half_duplex(rs, t->len, t->rx_buf);
} else if (t->tx_buf) {
mt7621_spi_write_half_duplex(rs, t->len, t->tx_buf);
}
m->actual_length += t->len;
}
/* Flush data and deassert CS */
mt7621_spi_flush(rs);
mt7621_spi_set_cs(spi, 0);
msg_done:
m->status = status;
spi_finalize_current_message(master);
return 0;
}
static int mt7621_spi_setup(struct spi_device *spi)
{
struct mt7621_spi *rs = spidev_to_mt7621_spi(spi);
if ((spi->max_speed_hz == 0) ||
(spi->max_speed_hz > (rs->sys_freq / 2)))
spi->max_speed_hz = rs->sys_freq / 2;
if (spi->max_speed_hz < (rs->sys_freq / 4097)) {
dev_err(&spi->dev, "setup: requested speed is too low %d Hz\n",
spi->max_speed_hz);
return -EINVAL;
}
return 0;
}
static const struct of_device_id mt7621_spi_match[] = {
{ .compatible = "ralink,mt7621-spi" },
{},
};
MODULE_DEVICE_TABLE(of, mt7621_spi_match);
static int mt7621_spi_probe(struct platform_device *pdev)
{
const struct of_device_id *match;
struct spi_controller *master;
struct mt7621_spi *rs;
void __iomem *base;
struct resource *r;
int status = 0;
struct clk *clk;
int ret;
match = of_match_device(mt7621_spi_match, &pdev->dev);
if (!match)
return -EINVAL;
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(&pdev->dev, r);
if (IS_ERR(base))
return PTR_ERR(base);
clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(clk)) {
dev_err(&pdev->dev, "unable to get SYS clock, err=%d\n",
status);
return PTR_ERR(clk);
}
status = clk_prepare_enable(clk);
if (status)
return status;
master = spi_alloc_master(&pdev->dev, sizeof(*rs));
if (!master) {
dev_info(&pdev->dev, "master allocation failed\n");
return -ENOMEM;
}
master->mode_bits = SPI_LSB_FIRST;
master->flags = SPI_CONTROLLER_HALF_DUPLEX;
master->setup = mt7621_spi_setup;
master->transfer_one_message = mt7621_spi_transfer_one_message;
master->bits_per_word_mask = SPI_BPW_MASK(8);
master->dev.of_node = pdev->dev.of_node;
master->num_chipselect = 2;
dev_set_drvdata(&pdev->dev, master);
rs = spi_controller_get_devdata(master);
rs->base = base;
rs->clk = clk;
rs->master = master;
rs->sys_freq = clk_get_rate(rs->clk);
rs->pending_write = 0;
dev_info(&pdev->dev, "sys_freq: %u\n", rs->sys_freq);
ret = device_reset(&pdev->dev);
if (ret) {
dev_err(&pdev->dev, "SPI reset failed!\n");
return ret;
}
return devm_spi_register_controller(&pdev->dev, master);
}
static int mt7621_spi_remove(struct platform_device *pdev)
{
struct spi_controller *master;
struct mt7621_spi *rs;
master = dev_get_drvdata(&pdev->dev);
rs = spi_controller_get_devdata(master);
clk_disable_unprepare(rs->clk);
return 0;
}
MODULE_ALIAS("platform:" DRIVER_NAME);
static struct platform_driver mt7621_spi_driver = {
.driver = {
.name = DRIVER_NAME,
.of_match_table = mt7621_spi_match,
},
.probe = mt7621_spi_probe,
.remove = mt7621_spi_remove,
};
module_platform_driver(mt7621_spi_driver);
MODULE_DESCRIPTION("MT7621 SPI driver");
MODULE_AUTHOR("Felix Fietkau <nbd@nbd.name>");
MODULE_LICENSE("GPL");