Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fix from Dave Airlie:
"An oops snuck in in an -rc3 patch, this fixes it"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
[PATCH] drm/mm: Fix support 4 GiB and larger ranges
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 4ad6e47..9de3412 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -211,8 +211,9 @@
* set bit IOMUXC_GPR1[21]. Or the PTP clock must be from pad
* (external OSC), and we need to clear the bit.
*/
- clksel = ptp_clk == enet_ref ? IMX6Q_GPR1_ENET_CLK_SEL_ANATOP :
- IMX6Q_GPR1_ENET_CLK_SEL_PAD;
+ clksel = clk_is_match(ptp_clk, enet_ref) ?
+ IMX6Q_GPR1_ENET_CLK_SEL_ANATOP :
+ IMX6Q_GPR1_ENET_CLK_SEL_PAD;
gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
if (!IS_ERR(gpr))
regmap_update_bits(gpr, IOMUXC_GPR1,
diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
index db7f8bc..25006a8 100644
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -144,12 +144,6 @@
divider->flags);
}
-/*
- * The reverse of DIV_ROUND_UP: The maximum number which
- * divided by m is r
- */
-#define MULT_ROUND_UP(r, m) ((r) * (m) + (m) - 1)
-
static bool _is_valid_table_div(const struct clk_div_table *table,
unsigned int div)
{
@@ -225,19 +219,24 @@
unsigned long parent_rate, unsigned long rate,
unsigned long flags)
{
- int up, down, div;
+ int up, down;
+ unsigned long up_rate, down_rate;
- up = down = div = DIV_ROUND_CLOSEST(parent_rate, rate);
+ up = DIV_ROUND_UP(parent_rate, rate);
+ down = parent_rate / rate;
if (flags & CLK_DIVIDER_POWER_OF_TWO) {
- up = __roundup_pow_of_two(div);
- down = __rounddown_pow_of_two(div);
+ up = __roundup_pow_of_two(up);
+ down = __rounddown_pow_of_two(down);
} else if (table) {
- up = _round_up_table(table, div);
- down = _round_down_table(table, div);
+ up = _round_up_table(table, up);
+ down = _round_down_table(table, down);
}
- return (up - div) <= (div - down) ? up : down;
+ up_rate = DIV_ROUND_UP(parent_rate, up);
+ down_rate = DIV_ROUND_UP(parent_rate, down);
+
+ return (rate - up_rate) <= (down_rate - rate) ? up : down;
}
static int _div_round(const struct clk_div_table *table,
@@ -313,7 +312,7 @@
return i;
}
parent_rate = __clk_round_rate(__clk_get_parent(hw->clk),
- MULT_ROUND_UP(rate, i));
+ rate * i);
now = DIV_ROUND_UP(parent_rate, i);
if (_is_best_div(rate, now, best, flags)) {
bestdiv = i;
@@ -353,7 +352,7 @@
bestdiv = readl(divider->reg) >> divider->shift;
bestdiv &= div_mask(divider->width);
bestdiv = _get_div(divider->table, bestdiv, divider->flags);
- return bestdiv;
+ return DIV_ROUND_UP(*prate, bestdiv);
}
return divider_round_rate(hw, rate, prate, divider->table,
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index eb01529..237f23f 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -1350,7 +1350,6 @@
return rate;
}
-EXPORT_SYMBOL_GPL(clk_core_get_rate);
/**
* clk_get_rate - return the rate of clk
@@ -2171,6 +2170,32 @@
}
/**
+ * clk_is_match - check if two clk's point to the same hardware clock
+ * @p: clk compared against q
+ * @q: clk compared against p
+ *
+ * Returns true if the two struct clk pointers both point to the same hardware
+ * clock node. Put differently, returns true if struct clk *p and struct clk *q
+ * share the same struct clk_core object.
+ *
+ * Returns false otherwise. Note that two NULL clks are treated as matching.
+ */
+bool clk_is_match(const struct clk *p, const struct clk *q)
+{
+ /* trivial case: identical struct clk's or both NULL */
+ if (p == q)
+ return true;
+
+ /* true if clk->core pointers match. Avoid derefing garbage */
+ if (!IS_ERR_OR_NULL(p) && !IS_ERR_OR_NULL(q))
+ if (p->core == q->core)
+ return true;
+
+ return false;
+}
+EXPORT_SYMBOL_GPL(clk_is_match);
+
+/**
* __clk_init - initialize the data structures in a struct clk
* @dev: device initializing this clk, placeholder for now
* @clk: clk being initialized
diff --git a/drivers/clk/qcom/gcc-msm8960.c b/drivers/clk/qcom/gcc-msm8960.c
index b0b562b..e60feff 100644
--- a/drivers/clk/qcom/gcc-msm8960.c
+++ b/drivers/clk/qcom/gcc-msm8960.c
@@ -48,6 +48,17 @@
},
};
+static struct clk_regmap pll4_vote = {
+ .enable_reg = 0x34c0,
+ .enable_mask = BIT(4),
+ .hw.init = &(struct clk_init_data){
+ .name = "pll4_vote",
+ .parent_names = (const char *[]){ "pll4" },
+ .num_parents = 1,
+ .ops = &clk_pll_vote_ops,
+ },
+};
+
static struct clk_pll pll8 = {
.l_reg = 0x3144,
.m_reg = 0x3148,
@@ -3023,6 +3034,7 @@
static struct clk_regmap *gcc_msm8960_clks[] = {
[PLL3] = &pll3.clkr,
+ [PLL4_VOTE] = &pll4_vote,
[PLL8] = &pll8.clkr,
[PLL8_VOTE] = &pll8_vote,
[PLL14] = &pll14.clkr,
@@ -3247,6 +3259,7 @@
static struct clk_regmap *gcc_apq8064_clks[] = {
[PLL3] = &pll3.clkr,
+ [PLL4_VOTE] = &pll4_vote,
[PLL8] = &pll8.clkr,
[PLL8_VOTE] = &pll8_vote,
[PLL14] = &pll14.clkr,
diff --git a/drivers/clk/qcom/lcc-ipq806x.c b/drivers/clk/qcom/lcc-ipq806x.c
index 121ffde..c9ff27b 100644
--- a/drivers/clk/qcom/lcc-ipq806x.c
+++ b/drivers/clk/qcom/lcc-ipq806x.c
@@ -462,7 +462,6 @@
.remove = lcc_ipq806x_remove,
.driver = {
.name = "lcc-ipq806x",
- .owner = THIS_MODULE,
.of_match_table = lcc_ipq806x_match_table,
},
};
diff --git a/drivers/clk/qcom/lcc-msm8960.c b/drivers/clk/qcom/lcc-msm8960.c
index a75a408..e2c8632 100644
--- a/drivers/clk/qcom/lcc-msm8960.c
+++ b/drivers/clk/qcom/lcc-msm8960.c
@@ -417,8 +417,8 @@
.mnctr_en_bit = 8,
.mnctr_reset_bit = 7,
.mnctr_mode_shift = 5,
- .n_val_shift = 16,
- .m_val_shift = 16,
+ .n_val_shift = 24,
+ .m_val_shift = 8,
.width = 8,
},
.p = {
@@ -547,7 +547,7 @@
return PTR_ERR(regmap);
/* Use the correct frequency plan depending on speed of PLL4 */
- val = regmap_read(regmap, 0x4, &val);
+ regmap_read(regmap, 0x4, &val);
if (val == 0x12) {
slimbus_src.freq_tbl = clk_tbl_aif_osr_492;
mi2s_osr_src.freq_tbl = clk_tbl_aif_osr_492;
@@ -574,7 +574,6 @@
.remove = lcc_msm8960_remove,
.driver = {
.name = "lcc-msm8960",
- .owner = THIS_MODULE,
.of_match_table = lcc_msm8960_match_table,
},
};
diff --git a/drivers/clk/ti/fapll.c b/drivers/clk/ti/fapll.c
index 6ef8963..d216406 100644
--- a/drivers/clk/ti/fapll.c
+++ b/drivers/clk/ti/fapll.c
@@ -84,7 +84,7 @@
struct fapll_data *fd = to_fapll(hw);
u32 v = readl_relaxed(fd->base);
- v |= (1 << FAPLL_MAIN_PLLEN);
+ v |= FAPLL_MAIN_PLLEN;
writel_relaxed(v, fd->base);
return 0;
@@ -95,7 +95,7 @@
struct fapll_data *fd = to_fapll(hw);
u32 v = readl_relaxed(fd->base);
- v &= ~(1 << FAPLL_MAIN_PLLEN);
+ v &= ~FAPLL_MAIN_PLLEN;
writel_relaxed(v, fd->base);
}
@@ -104,7 +104,7 @@
struct fapll_data *fd = to_fapll(hw);
u32 v = readl_relaxed(fd->base);
- return v & (1 << FAPLL_MAIN_PLLEN);
+ return v & FAPLL_MAIN_PLLEN;
}
static unsigned long ti_fapll_recalc_rate(struct clk_hw *hw,
diff --git a/include/linux/clk.h b/include/linux/clk.h
index 8381bbf..68c16a6 100644
--- a/include/linux/clk.h
+++ b/include/linux/clk.h
@@ -125,6 +125,19 @@
*/
int clk_get_phase(struct clk *clk);
+/**
+ * clk_is_match - check if two clk's point to the same hardware clock
+ * @p: clk compared against q
+ * @q: clk compared against p
+ *
+ * Returns true if the two struct clk pointers both point to the same hardware
+ * clock node. Put differently, returns true if struct clk *p and struct clk *q
+ * share the same struct clk_core object.
+ *
+ * Returns false otherwise. Note that two NULL clks are treated as matching.
+ */
+bool clk_is_match(const struct clk *p, const struct clk *q);
+
#else
static inline long clk_get_accuracy(struct clk *clk)
@@ -142,6 +155,11 @@
return -ENOTSUPP;
}
+static inline bool clk_is_match(const struct clk *p, const struct clk *q)
+{
+ return p == q;
+}
+
#endif
/**
diff --git a/sound/soc/fsl/fsl_spdif.c b/sound/soc/fsl/fsl_spdif.c
index 75870c0..91eb3ae 100644
--- a/sound/soc/fsl/fsl_spdif.c
+++ b/sound/soc/fsl/fsl_spdif.c
@@ -1049,7 +1049,7 @@
enum spdif_txrate index, bool round)
{
const u32 rate[] = { 32000, 44100, 48000, 96000, 192000 };
- bool is_sysclk = clk == spdif_priv->sysclk;
+ bool is_sysclk = clk_is_match(clk, spdif_priv->sysclk);
u64 rate_ideal, rate_actual, sub;
u32 sysclk_dfmin, sysclk_dfmax;
u32 txclk_df, sysclk_df, arate;
@@ -1143,7 +1143,7 @@
spdif_priv->txclk_src[index], rate[index]);
dev_dbg(&pdev->dev, "use txclk df %d for %dHz sample rate\n",
spdif_priv->txclk_df[index], rate[index]);
- if (spdif_priv->txclk[index] == spdif_priv->sysclk)
+ if (clk_is_match(spdif_priv->txclk[index], spdif_priv->sysclk))
dev_dbg(&pdev->dev, "use sysclk df %d for %dHz sample rate\n",
spdif_priv->sysclk_df[index], rate[index]);
dev_dbg(&pdev->dev, "the best rate for %dHz sample rate is %dHz\n",
diff --git a/sound/soc/kirkwood/kirkwood-i2s.c b/sound/soc/kirkwood/kirkwood-i2s.c
index def7d82..d194830 100644
--- a/sound/soc/kirkwood/kirkwood-i2s.c
+++ b/sound/soc/kirkwood/kirkwood-i2s.c
@@ -579,7 +579,7 @@
if (PTR_ERR(priv->extclk) == -EPROBE_DEFER)
return -EPROBE_DEFER;
} else {
- if (priv->extclk == priv->clk) {
+ if (clk_is_match(priv->extclk, priv->clk)) {
devm_clk_put(&pdev->dev, priv->extclk);
priv->extclk = ERR_PTR(-EINVAL);
} else {
