blob: d090d1884fb724fd39a0f1eb7a122cf5fd9f4c1d [file] [log] [blame]
/*
* TX ucode for the Intel IXP2400 in POS-PHY mode.
* Copyright (C) 2004, 2005 Lennert Buytenhek
* Dedicated to Marija Kulikova.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* Assumptions made in this code:
* - The IXP2400 MSF is configured for POS-PHY mode, in a mode where
* only one TBUF partition is used. This includes, for example,
* 1x32 SPHY and 1x32 MPHY32, but not 4x8 SPHY or 1x32 MPHY4. (This
* is not an exhaustive list.)
* - The TBUF uses 64-byte mpackets.
* - TX descriptors reside in SRAM, and have the following format:
* struct tx_desc
* {
* // to uengine
* u32 buf_phys_addr;
* u32 pkt_length;
* u32 channel;
* };
* - Packet data resides in DRAM.
* - Packet buffer addresses are 8-byte aligned.
* - Scratch ring 2 is tx_pending.
* - Scratch ring 3 is tx_done, and has status condition 'full'.
* - This code is run on all eight threads of the microengine it runs on.
*/
#define TX_SEQUENCE_0 0x0060
#define TBUF_CTRL 0x1800
#define PARTITION_SIZE 128
#define PARTITION_THRESH 96
.sig volatile sig1
.sig volatile sig2
.sig volatile sig3
.reg @old_tx_seq_0
.reg @mpkts_in_flight
.reg @next_tbuf_mpacket
.reg @buffer_handle
.reg @buffer_start
.reg @packet_length
.reg @channel
.reg @packet_offset
.reg zero
immed[zero, 0]
/*
* Skip context 0 initialisation?
*/
.begin
br!=ctx[0, mpacket_tx_loop#]
.end
/*
* Wait until all pending TBUF elements have been transmitted.
*/
.begin
.reg read $tx
.sig zzz
loop_empty#:
msf[read, $tx, zero, TX_SEQUENCE_0, 1], ctx_swap[zzz]
alu_shf[--, --, b, $tx, >>31]
beq[loop_empty#]
alu[@old_tx_seq_0, --, b, $tx]
.end
immed[@mpkts_in_flight, 0]
alu[@next_tbuf_mpacket, @old_tx_seq_0, and, (PARTITION_SIZE - 1)]
immed[@buffer_handle, 0]
/*
* Initialise signal pipeline.
*/
.begin
local_csr_wr[SAME_ME_SIGNAL, (&sig1 << 3)]
.set_sig sig1
local_csr_wr[SAME_ME_SIGNAL, (&sig2 << 3)]
.set_sig sig2
local_csr_wr[SAME_ME_SIGNAL, (&sig3 << 3)]
.set_sig sig3
.end
mpacket_tx_loop#:
.begin
.reg tbuf_element_index
.reg buffer_handle
.reg sop_eop
.reg packet_data
.reg channel
.reg mpacket_size
/*
* If there is no packet currently being transmitted,
* dequeue the next TX descriptor, and fetch the buffer
* address, packet length and destination channel number.
*/
.begin
.reg read $stemp $stemp2 $stemp3
.xfer_order $stemp $stemp2 $stemp3
.sig zzz
ctx_arb[sig1]
alu[--, --, b, @buffer_handle]
bne[already_got_packet#]
tx_nobufs#:
scratch[get, $stemp, zero, 8, 1], ctx_swap[zzz]
alu[@buffer_handle, --, b, $stemp]
beq[tx_nobufs#]
sram[read, $stemp, $stemp, 0, 3], ctx_swap[zzz]
alu[@buffer_start, --, b, $stemp]
alu[@packet_length, --, b, $stemp2]
beq[zero_byte_packet#]
alu[@channel, --, b, $stemp3]
immed[@packet_offset, 0]
already_got_packet#:
local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig1 << 3))]
.end
/*
* Determine tbuf element index, SOP/EOP flags, mpacket
* offset and mpacket size and cache buffer_handle and
* channel number.
*/
.begin
alu[tbuf_element_index, --, b, @next_tbuf_mpacket]
alu[@next_tbuf_mpacket, @next_tbuf_mpacket, +, 1]
alu[@next_tbuf_mpacket, @next_tbuf_mpacket, and,
(PARTITION_SIZE - 1)]
alu[buffer_handle, --, b, @buffer_handle]
immed[@buffer_handle, 0]
immed[sop_eop, 1]
alu[packet_data, --, b, @packet_offset]
bne[no_sop#]
alu[sop_eop, sop_eop, or, 2]
no_sop#:
alu[packet_data, packet_data, +, @buffer_start]
alu[channel, --, b, @channel]
alu[mpacket_size, @packet_length, -, @packet_offset]
alu[--, 64, -, mpacket_size]
bhs[eop#]
alu[@buffer_handle, --, b, buffer_handle]
immed[mpacket_size, 64]
alu[sop_eop, sop_eop, and, 2]
eop#:
alu[@packet_offset, @packet_offset, +, mpacket_size]
.end
/*
* Wait until there's enough space in the TBUF.
*/
.begin
.reg read $tx
.reg temp
.sig zzz
ctx_arb[sig2]
br[test_space#]
loop_space#:
msf[read, $tx, zero, TX_SEQUENCE_0, 1], ctx_swap[zzz]
alu[temp, $tx, -, @old_tx_seq_0]
alu[temp, temp, and, 0xff]
alu[@mpkts_in_flight, @mpkts_in_flight, -, temp]
alu[@old_tx_seq_0, --, b, $tx]
test_space#:
alu[--, PARTITION_THRESH, -, @mpkts_in_flight]
blo[loop_space#]
alu[@mpkts_in_flight, @mpkts_in_flight, +, 1]
local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig2 << 3))]
.end
/*
* Copy the packet data to the TBUF.
*/
.begin
.reg temp
.sig copy_sig
alu[temp, mpacket_size, -, 1]
alu_shf[temp, 0x10, or, temp, >>3]
alu_shf[temp, 0x10, or, temp, <<21]
alu_shf[temp, temp, or, tbuf_element_index, <<11]
alu_shf[--, temp, or, 1, <<18]
dram[tbuf_wr, --, packet_data, 0, max_8],
indirect_ref, sig_done[copy_sig]
ctx_arb[copy_sig]
.end
/*
* Mark TBUF element as ready-to-be-transmitted.
*/
.begin
.reg write $tsw $tsw2
.xfer_order $tsw $tsw2
.reg temp
.sig zzz
alu_shf[temp, channel, or, mpacket_size, <<24]
alu_shf[$tsw, temp, or, sop_eop, <<8]
immed[$tsw2, 0]
immed[temp, TBUF_CTRL]
alu_shf[temp, temp, or, tbuf_element_index, <<3]
msf[write, $tsw, temp, 0, 2], ctx_swap[zzz]
.end
/*
* Resynchronise.
*/
.begin
ctx_arb[sig3]
local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig3 << 3))]
.end
/*
* If this was an EOP mpacket, recycle the TX buffer
* and signal the host.
*/
.begin
.reg write $stemp
.sig zzz
alu[--, sop_eop, and, 1]
beq[mpacket_tx_loop#]
tx_done_ring_full#:
br_inp_state[SCR_Ring3_Status, tx_done_ring_full#]
alu[$stemp, --, b, buffer_handle]
scratch[put, $stemp, zero, 12, 1], ctx_swap[zzz]
cap[fast_wr, 0, XSCALE_INT_A]
br[mpacket_tx_loop#]
.end
.end
zero_byte_packet#:
halt