Merge tag 'usb-4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY driver fixes from Greg KH:
"Here are some small USB and PHY driver fixes for 4.20-rc5
Nothing big at all, just the usual handful of USB fixes for reported
issues, along with some gadget and PHY driver bug fixes.
All of these have been in linux-next with no reported issues. Note,
the USB gadget fixes were in linux-next on its own branch, not in
mine, it just got merged into here yesterday and missed linux-next of
today"
* tag 'usb-4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: gadget: u_ether: fix unsafe list iteration
USB: omap_udc: fix rejection of out transfers when DMA is used
USB: omap_udc: fix USB gadget functionality on Palm Tungsten E
USB: omap_udc: fix omap_udc_start() on 15xx machines
USB: omap_udc: fix crashes on probe error and module removal
USB: omap_udc: use devm_request_irq()
usb: core: quirks: add RESET_RESUME quirk for Cherry G230 Stream series
USB: usb-storage: Add new IDs to ums-realtek
Revert "usb: dwc3: gadget: skip Set/Clear Halt when invalid"
phy: qcom-qusb2: Fix HSTX_TRIM tuning with fused value for SDM845
phy: qcom-qusb2: Use HSTX_TRIM fused value as is
dt-bindings: phy-qcom-qmp: Fix several mistakes from prior commits
phy: uniphier-pcie: Depend on HAS_IOMEM
diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
index adf20b2..fbc198d 100644
--- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
@@ -40,24 +40,36 @@
"ref" for 19.2 MHz ref clk,
"com_aux" for phy common block aux clock,
"ref_aux" for phy reference aux clock,
+
+ For "qcom,ipq8074-qmp-pcie-phy": no clocks are listed.
For "qcom,msm8996-qmp-pcie-phy" must contain:
"aux", "cfg_ahb", "ref".
For "qcom,msm8996-qmp-usb3-phy" must contain:
"aux", "cfg_ahb", "ref".
- For "qcom,qmp-v3-usb3-phy" must contain:
+ For "qcom,sdm845-qmp-usb3-phy" must contain:
"aux", "cfg_ahb", "ref", "com_aux".
+ For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
+ "aux", "cfg_ahb", "ref", "com_aux".
+ For "qcom,sdm845-qmp-ufs-phy" must contain:
+ "ref", "ref_aux".
- resets: a list of phandles and reset controller specifier pairs,
one for each entry in reset-names.
- reset-names: "phy" for reset of phy block,
"common" for phy common block reset,
- "cfg" for phy's ahb cfg block reset (Optional).
- For "qcom,msm8996-qmp-pcie-phy" must contain:
- "phy", "common", "cfg".
- For "qcom,msm8996-qmp-usb3-phy" must contain
- "phy", "common".
+ "cfg" for phy's ahb cfg block reset.
+
For "qcom,ipq8074-qmp-pcie-phy" must contain:
- "phy", "common".
+ "phy", "common".
+ For "qcom,msm8996-qmp-pcie-phy" must contain:
+ "phy", "common", "cfg".
+ For "qcom,msm8996-qmp-usb3-phy" must contain
+ "phy", "common".
+ For "qcom,sdm845-qmp-usb3-phy" must contain:
+ "phy", "common".
+ For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
+ "phy", "common".
+ For "qcom,sdm845-qmp-ufs-phy": no resets are listed.
- vdda-phy-supply: Phandle to a regulator supply to PHY core block.
- vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block.
@@ -79,9 +91,10 @@
- #phy-cells: must be 0
+Required properties child node of pcie and usb3 qmp phys:
- clocks: a list of phandles and clock-specifier pairs,
one for each entry in clock-names.
- - clock-names: Must contain following for pcie and usb qmp phys:
+ - clock-names: Must contain following:
"pipe<lane-number>" for pipe clock specific to each lane.
- clock-output-names: Name of the PHY clock that will be the parent for
the above pipe clock.
@@ -91,9 +104,11 @@
(or)
"pcie20_phy1_pipe_clk"
+Required properties for child node of PHYs with lane reset, AKA:
+ "qcom,msm8996-qmp-pcie-phy"
- resets: a list of phandles and reset controller specifier pairs,
one for each entry in reset-names.
- - reset-names: Must contain following for pcie qmp phys:
+ - reset-names: Must contain following:
"lane<lane-number>" for reset specific to each lane.
Example:
diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index 9ce5311..6d4b44b 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -231,6 +231,7 @@
.mask_core_ready = CORE_READY_STATUS,
.has_pll_override = true,
.autoresume_en = BIT(0),
+ .update_tune1_with_efuse = true,
};
static const char * const qusb2_phy_vreg_names[] = {
@@ -402,10 +403,10 @@
/*
* Read efuse register having TUNE2/1 parameter's high nibble.
- * If efuse register shows value as 0x0, or if we fail to find
- * a valid efuse register settings, then use default value
- * as 0xB for high nibble that we have already set while
- * configuring phy.
+ * If efuse register shows value as 0x0 (indicating value is not
+ * fused), or if we fail to find a valid efuse register setting,
+ * then use default value for high nibble that we have already
+ * set while configuring the phy.
*/
val = nvmem_cell_read(qphy->cell, NULL);
if (IS_ERR(val) || !val[0]) {
@@ -415,12 +416,13 @@
/* Fused TUNE1/2 value is the higher nibble only */
if (cfg->update_tune1_with_efuse)
- qusb2_setbits(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE1],
- val[0] << 0x4);
+ qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE1],
+ val[0] << HSTX_TRIM_SHIFT,
+ HSTX_TRIM_MASK);
else
- qusb2_setbits(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE2],
- val[0] << 0x4);
-
+ qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE2],
+ val[0] << HSTX_TRIM_SHIFT,
+ HSTX_TRIM_MASK);
}
static int qusb2_phy_set_mode(struct phy *phy, enum phy_mode mode)
diff --git a/drivers/phy/socionext/Kconfig b/drivers/phy/socionext/Kconfig
index 467e814..9c85231 100644
--- a/drivers/phy/socionext/Kconfig
+++ b/drivers/phy/socionext/Kconfig
@@ -26,7 +26,8 @@
config PHY_UNIPHIER_PCIE
tristate "Uniphier PHY driver for PCIe controller"
- depends on (ARCH_UNIPHIER || COMPILE_TEST) && OF
+ depends on ARCH_UNIPHIER || COMPILE_TEST
+ depends on OF && HAS_IOMEM
default PCIE_UNIPHIER
select GENERIC_PHY
help
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index f9ff03e..0690fcf 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -209,6 +209,9 @@
/* Microsoft LifeCam-VX700 v2.0 */
{ USB_DEVICE(0x045e, 0x0770), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Cherry Stream G230 2.0 (G85-231) and 3.0 (G85-232) */
+ { USB_DEVICE(0x046a, 0x0023), .driver_info = USB_QUIRK_RESET_RESUME },
+
/* Logitech HD Pro Webcams C920, C920-C, C925e and C930e */
{ USB_DEVICE(0x046d, 0x082d), .driver_info = USB_QUIRK_DELAY_INIT },
{ USB_DEVICE(0x046d, 0x0841), .driver_info = USB_QUIRK_DELAY_INIT },
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 9faad89..9f92ee0 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1470,9 +1470,6 @@
unsigned transfer_in_flight;
unsigned started;
- if (dep->flags & DWC3_EP_STALL)
- return 0;
-
if (dep->number > 1)
trb = dwc3_ep_prev_trb(dep, dep->trb_enqueue);
else
@@ -1494,8 +1491,6 @@
else
dep->flags |= DWC3_EP_STALL;
} else {
- if (!(dep->flags & DWC3_EP_STALL))
- return 0;
ret = dwc3_send_clear_stall_ep_cmd(dep);
if (ret)
diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c
index 1000d86..0f026d4 100644
--- a/drivers/usb/gadget/function/u_ether.c
+++ b/drivers/usb/gadget/function/u_ether.c
@@ -401,12 +401,12 @@
static void rx_fill(struct eth_dev *dev, gfp_t gfp_flags)
{
struct usb_request *req;
- struct usb_request *tmp;
unsigned long flags;
/* fill unused rxq slots with some skb */
spin_lock_irqsave(&dev->req_lock, flags);
- list_for_each_entry_safe(req, tmp, &dev->rx_reqs, list) {
+ while (!list_empty(&dev->rx_reqs)) {
+ req = list_first_entry(&dev->rx_reqs, struct usb_request, list);
list_del_init(&req->list);
spin_unlock_irqrestore(&dev->req_lock, flags);
@@ -1125,7 +1125,6 @@
{
struct eth_dev *dev = link->ioport;
struct usb_request *req;
- struct usb_request *tmp;
WARN_ON(!dev);
if (!dev)
@@ -1142,7 +1141,8 @@
*/
usb_ep_disable(link->in_ep);
spin_lock(&dev->req_lock);
- list_for_each_entry_safe(req, tmp, &dev->tx_reqs, list) {
+ while (!list_empty(&dev->tx_reqs)) {
+ req = list_first_entry(&dev->tx_reqs, struct usb_request, list);
list_del(&req->list);
spin_unlock(&dev->req_lock);
@@ -1154,7 +1154,8 @@
usb_ep_disable(link->out_ep);
spin_lock(&dev->req_lock);
- list_for_each_entry_safe(req, tmp, &dev->rx_reqs, list) {
+ while (!list_empty(&dev->rx_reqs)) {
+ req = list_first_entry(&dev->rx_reqs, struct usb_request, list);
list_del(&req->list);
spin_unlock(&dev->req_lock);
diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c
index 3a16431..fcf13ef 100644
--- a/drivers/usb/gadget/udc/omap_udc.c
+++ b/drivers/usb/gadget/udc/omap_udc.c
@@ -2033,6 +2033,7 @@
{
return machine_is_omap_innovator()
|| machine_is_omap_osk()
+ || machine_is_omap_palmte()
|| machine_is_sx1()
/* No known omap7xx boards with vbus sense */
|| cpu_is_omap7xx();
@@ -2041,7 +2042,7 @@
static int omap_udc_start(struct usb_gadget *g,
struct usb_gadget_driver *driver)
{
- int status = -ENODEV;
+ int status;
struct omap_ep *ep;
unsigned long flags;
@@ -2079,6 +2080,7 @@
goto done;
}
} else {
+ status = 0;
if (can_pullup(udc))
pullup_enable(udc);
else
@@ -2593,9 +2595,22 @@
static void omap_udc_release(struct device *dev)
{
- complete(udc->done);
+ pullup_disable(udc);
+ if (!IS_ERR_OR_NULL(udc->transceiver)) {
+ usb_put_phy(udc->transceiver);
+ udc->transceiver = NULL;
+ }
+ omap_writew(0, UDC_SYSCON1);
+ remove_proc_file();
+ if (udc->dc_clk) {
+ if (udc->clk_requested)
+ omap_udc_enable_clock(0);
+ clk_put(udc->hhc_clk);
+ clk_put(udc->dc_clk);
+ }
+ if (udc->done)
+ complete(udc->done);
kfree(udc);
- udc = NULL;
}
static int
@@ -2627,6 +2642,7 @@
udc->gadget.speed = USB_SPEED_UNKNOWN;
udc->gadget.max_speed = USB_SPEED_FULL;
udc->gadget.name = driver_name;
+ udc->gadget.quirk_ep_out_aligned_size = 1;
udc->transceiver = xceiv;
/* ep0 is special; put it right after the SETUP buffer */
@@ -2867,8 +2883,8 @@
udc->clr_halt = UDC_RESET_EP;
/* USB general purpose IRQ: ep0, state changes, dma, etc */
- status = request_irq(pdev->resource[1].start, omap_udc_irq,
- 0, driver_name, udc);
+ status = devm_request_irq(&pdev->dev, pdev->resource[1].start,
+ omap_udc_irq, 0, driver_name, udc);
if (status != 0) {
ERR("can't get irq %d, err %d\n",
(int) pdev->resource[1].start, status);
@@ -2876,20 +2892,20 @@
}
/* USB "non-iso" IRQ (PIO for all but ep0) */
- status = request_irq(pdev->resource[2].start, omap_udc_pio_irq,
- 0, "omap_udc pio", udc);
+ status = devm_request_irq(&pdev->dev, pdev->resource[2].start,
+ omap_udc_pio_irq, 0, "omap_udc pio", udc);
if (status != 0) {
ERR("can't get irq %d, err %d\n",
(int) pdev->resource[2].start, status);
- goto cleanup2;
+ goto cleanup1;
}
#ifdef USE_ISO
- status = request_irq(pdev->resource[3].start, omap_udc_iso_irq,
- 0, "omap_udc iso", udc);
+ status = devm_request_irq(&pdev->dev, pdev->resource[3].start,
+ omap_udc_iso_irq, 0, "omap_udc iso", udc);
if (status != 0) {
ERR("can't get irq %d, err %d\n",
(int) pdev->resource[3].start, status);
- goto cleanup3;
+ goto cleanup1;
}
#endif
if (cpu_is_omap16xx() || cpu_is_omap7xx()) {
@@ -2900,23 +2916,8 @@
}
create_proc_file();
- status = usb_add_gadget_udc_release(&pdev->dev, &udc->gadget,
- omap_udc_release);
- if (status)
- goto cleanup4;
-
- return 0;
-
-cleanup4:
- remove_proc_file();
-
-#ifdef USE_ISO
-cleanup3:
- free_irq(pdev->resource[2].start, udc);
-#endif
-
-cleanup2:
- free_irq(pdev->resource[1].start, udc);
+ return usb_add_gadget_udc_release(&pdev->dev, &udc->gadget,
+ omap_udc_release);
cleanup1:
kfree(udc);
@@ -2943,42 +2944,15 @@
{
DECLARE_COMPLETION_ONSTACK(done);
- if (!udc)
- return -ENODEV;
-
- usb_del_gadget_udc(&udc->gadget);
- if (udc->driver)
- return -EBUSY;
-
udc->done = &done;
- pullup_disable(udc);
- if (!IS_ERR_OR_NULL(udc->transceiver)) {
- usb_put_phy(udc->transceiver);
- udc->transceiver = NULL;
- }
- omap_writew(0, UDC_SYSCON1);
+ usb_del_gadget_udc(&udc->gadget);
- remove_proc_file();
-
-#ifdef USE_ISO
- free_irq(pdev->resource[3].start, udc);
-#endif
- free_irq(pdev->resource[2].start, udc);
- free_irq(pdev->resource[1].start, udc);
-
- if (udc->dc_clk) {
- if (udc->clk_requested)
- omap_udc_enable_clock(0);
- clk_put(udc->hhc_clk);
- clk_put(udc->dc_clk);
- }
+ wait_for_completion(&done);
release_mem_region(pdev->resource[0].start,
pdev->resource[0].end - pdev->resource[0].start + 1);
- wait_for_completion(&done);
-
return 0;
}
diff --git a/drivers/usb/storage/unusual_realtek.h b/drivers/usb/storage/unusual_realtek.h
index d17cd95..6b2140f 100644
--- a/drivers/usb/storage/unusual_realtek.h
+++ b/drivers/usb/storage/unusual_realtek.h
@@ -27,4 +27,14 @@
"USB Card Reader",
USB_SC_DEVICE, USB_PR_DEVICE, init_realtek_cr, 0),
+UNUSUAL_DEV(0x0bda, 0x0177, 0x0000, 0x9999,
+ "Realtek",
+ "USB Card Reader",
+ USB_SC_DEVICE, USB_PR_DEVICE, init_realtek_cr, 0),
+
+UNUSUAL_DEV(0x0bda, 0x0184, 0x0000, 0x9999,
+ "Realtek",
+ "USB Card Reader",
+ USB_SC_DEVICE, USB_PR_DEVICE, init_realtek_cr, 0),
+
#endif /* defined(CONFIG_USB_STORAGE_REALTEK) || ... */