blob: fa6e0c3b3aa678cd1e62f91021dc89036211aa8a [file] [log] [blame]
/*
* Copyright (C) 1999 Eric Youngdale
* Copyright (C) 2014 Christoph Hellwig
*
* SCSI queueing library.
* Initial versions: Eric Youngdale (eric@andante.org).
* Based upon conversations with large numbers
* of people at Linux Expo.
*/
#include <linux/bio.h>
#include <linux/bitops.h>
#include <linux/blkdev.h>
#include <linux/completion.h>
#include <linux/kernel.h>
#include <linux/export.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/hardirq.h>
#include <linux/scatterlist.h>
#include <linux/blk-mq.h>
#include <linux/ratelimit.h>
#include <asm/unaligned.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_dbg.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_driver.h>
#include <scsi/scsi_eh.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport.h> /* __scsi_init_queue() */
#include <scsi/scsi_dh.h>
#include <trace/events/scsi.h>
#include "scsi_debugfs.h"
#include "scsi_priv.h"
#include "scsi_logging.h"
static struct kmem_cache *scsi_sdb_cache;
static struct kmem_cache *scsi_sense_cache;
static struct kmem_cache *scsi_sense_isadma_cache;
static DEFINE_MUTEX(scsi_sense_cache_mutex);
static void scsi_mq_uninit_cmd(struct scsi_cmnd *cmd);
static inline struct kmem_cache *
scsi_select_sense_cache(bool unchecked_isa_dma)
{
return unchecked_isa_dma ? scsi_sense_isadma_cache : scsi_sense_cache;
}
static void scsi_free_sense_buffer(bool unchecked_isa_dma,
unsigned char *sense_buffer)
{
kmem_cache_free(scsi_select_sense_cache(unchecked_isa_dma),
sense_buffer);
}
static unsigned char *scsi_alloc_sense_buffer(bool unchecked_isa_dma,
gfp_t gfp_mask, int numa_node)
{
return kmem_cache_alloc_node(scsi_select_sense_cache(unchecked_isa_dma),
gfp_mask, numa_node);
}
int scsi_init_sense_cache(struct Scsi_Host *shost)
{
struct kmem_cache *cache;
int ret = 0;
cache = scsi_select_sense_cache(shost->unchecked_isa_dma);
if (cache)
return 0;
mutex_lock(&scsi_sense_cache_mutex);
if (shost->unchecked_isa_dma) {
scsi_sense_isadma_cache =
kmem_cache_create("scsi_sense_cache(DMA)",
SCSI_SENSE_BUFFERSIZE, 0,
SLAB_HWCACHE_ALIGN | SLAB_CACHE_DMA, NULL);
if (!scsi_sense_isadma_cache)
ret = -ENOMEM;
} else {
scsi_sense_cache =
kmem_cache_create_usercopy("scsi_sense_cache",
SCSI_SENSE_BUFFERSIZE, 0, SLAB_HWCACHE_ALIGN,
0, SCSI_SENSE_BUFFERSIZE, NULL);
if (!scsi_sense_cache)
ret = -ENOMEM;
}
mutex_unlock(&scsi_sense_cache_mutex);
return ret;
}
/*
* When to reinvoke queueing after a resource shortage. It's 3 msecs to
* not change behaviour from the previous unplug mechanism, experimentation
* may prove this needs changing.
*/
#define SCSI_QUEUE_DELAY 3
static void
scsi_set_blocked(struct scsi_cmnd *cmd, int reason)
{
struct Scsi_Host *host = cmd->device->host;
struct scsi_device *device = cmd->device;
struct scsi_target *starget = scsi_target(device);
/*
* Set the appropriate busy bit for the device/host.
*
* If the host/device isn't busy, assume that something actually
* completed, and that we should be able to queue a command now.
*
* Note that the prior mid-layer assumption that any host could
* always queue at least one command is now broken. The mid-layer
* will implement a user specifiable stall (see
* scsi_host.max_host_blocked and scsi_device.max_device_blocked)
* if a command is requeued with no other commands outstanding
* either for the device or for the host.
*/
switch (reason) {
case SCSI_MLQUEUE_HOST_BUSY:
atomic_set(&host->host_blocked, host->max_host_blocked);
break;
case SCSI_MLQUEUE_DEVICE_BUSY:
case SCSI_MLQUEUE_EH_RETRY:
atomic_set(&device->device_blocked,
device->max_device_blocked);
break;
case SCSI_MLQUEUE_TARGET_BUSY:
atomic_set(&starget->target_blocked,
starget->max_target_blocked);
break;
}
}
static void scsi_mq_requeue_cmd(struct scsi_cmnd *cmd)
{
struct scsi_device *sdev = cmd->device;
if (cmd->request->rq_flags & RQF_DONTPREP) {
cmd->request->rq_flags &= ~RQF_DONTPREP;
scsi_mq_uninit_cmd(cmd);
} else {
WARN_ON_ONCE(true);
}
blk_mq_requeue_request(cmd->request, true);
put_device(&sdev->sdev_gendev);
}
/**
* __scsi_queue_insert - private queue insertion
* @cmd: The SCSI command being requeued
* @reason: The reason for the requeue
* @unbusy: Whether the queue should be unbusied
*
* This is a private queue insertion. The public interface
* scsi_queue_insert() always assumes the queue should be unbusied
* because it's always called before the completion. This function is
* for a requeue after completion, which should only occur in this
* file.
*/
static void __scsi_queue_insert(struct scsi_cmnd *cmd, int reason, bool unbusy)
{
struct scsi_device *device = cmd->device;
struct request_queue *q = device->request_queue;
unsigned long flags;
SCSI_LOG_MLQUEUE(1, scmd_printk(KERN_INFO, cmd,
"Inserting command %p into mlqueue\n", cmd));
scsi_set_blocked(cmd, reason);
/*
* Decrement the counters, since these commands are no longer
* active on the host/device.
*/
if (unbusy)
scsi_device_unbusy(device);
/*
* Requeue this command. It will go before all other commands
* that are already in the queue. Schedule requeue work under
* lock such that the kblockd_schedule_work() call happens
* before blk_cleanup_queue() finishes.
*/
cmd->result = 0;
if (q->mq_ops) {
/*
* Before a SCSI command is dispatched,
* get_device(&sdev->sdev_gendev) is called and the host,
* target and device busy counters are increased. Since
* requeuing a request causes these actions to be repeated and
* since scsi_device_unbusy() has already been called,
* put_device(&device->sdev_gendev) must still be called. Call
* put_device() after blk_mq_requeue_request() to avoid that
* removal of the SCSI device can start before requeueing has
* happened.
*/
blk_mq_requeue_request(cmd->request, true);
put_device(&device->sdev_gendev);
return;
}
spin_lock_irqsave(q->queue_lock, flags);
blk_requeue_request(q, cmd->request);
kblockd_schedule_work(&device->requeue_work);
spin_unlock_irqrestore(q->queue_lock, flags);
}
/*
* Function: scsi_queue_insert()
*
* Purpose: Insert a command in the midlevel queue.
*
* Arguments: cmd - command that we are adding to queue.
* reason - why we are inserting command to queue.
*
* Lock status: Assumed that lock is not held upon entry.
*
* Returns: Nothing.
*
* Notes: We do this for one of two cases. Either the host is busy
* and it cannot accept any more commands for the time being,
* or the device returned QUEUE_FULL and can accept no more
* commands.
* Notes: This could be called either from an interrupt context or a
* normal process context.
*/
void scsi_queue_insert(struct scsi_cmnd *cmd, int reason)
{
__scsi_queue_insert(cmd, reason, true);
}
/**
* __scsi_execute - insert request and wait for the result
* @sdev: scsi device
* @cmd: scsi command
* @data_direction: data direction
* @buffer: data buffer
* @bufflen: len of buffer
* @sense: optional sense buffer
* @sshdr: optional decoded sense header
* @timeout: request timeout in seconds
* @retries: number of times to retry request
* @flags: flags for ->cmd_flags
* @rq_flags: flags for ->rq_flags
* @resid: optional residual length
*
* Returns the scsi_cmnd result field if a command was executed, or a negative
* Linux error code if we didn't get that far.
*/
int __scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
int data_direction, void *buffer, unsigned bufflen,
unsigned char *sense, struct scsi_sense_hdr *sshdr,
int timeout, int retries, u64 flags, req_flags_t rq_flags,
int *resid)
{
struct request *req;
struct scsi_request *rq;
int ret = DRIVER_ERROR << 24;
req = blk_get_request(sdev->request_queue,
data_direction == DMA_TO_DEVICE ?
REQ_OP_SCSI_OUT : REQ_OP_SCSI_IN, BLK_MQ_REQ_PREEMPT);
if (IS_ERR(req))
return ret;
rq = scsi_req(req);
if (bufflen && blk_rq_map_kern(sdev->request_queue, req,
buffer, bufflen, GFP_NOIO))
goto out;
rq->cmd_len = COMMAND_SIZE(cmd[0]);
memcpy(rq->cmd, cmd, rq->cmd_len);
rq->retries = retries;
req->timeout = timeout;
req->cmd_flags |= flags;
req->rq_flags |= rq_flags | RQF_QUIET;
/*
* head injection *required* here otherwise quiesce won't work
*/
blk_execute_rq(req->q, NULL, req, 1);
/*
* Some devices (USB mass-storage in particular) may transfer
* garbage data together with a residue indicating that the data
* is invalid. Prevent the garbage from being misinterpreted
* and prevent security leaks by zeroing out the excess data.
*/
if (unlikely(rq->resid_len > 0 && rq->resid_len <= bufflen))
memset(buffer + (bufflen - rq->resid_len), 0, rq->resid_len);
if (resid)
*resid = rq->resid_len;
if (sense && rq->sense_len)
memcpy(sense, rq->sense, SCSI_SENSE_BUFFERSIZE);
if (sshdr)
scsi_normalize_sense(rq->sense, rq->sense_len, sshdr);
ret = rq->result;
out:
blk_put_request(req);
return ret;
}
EXPORT_SYMBOL(__scsi_execute);
/*
* Function: scsi_init_cmd_errh()
*
* Purpose: Initialize cmd fields related to error handling.
*
* Arguments: cmd - command that is ready to be queued.
*
* Notes: This function has the job of initializing a number of
* fields related to error handling. Typically this will
* be called once for each command, as required.
*/
static void scsi_init_cmd_errh(struct scsi_cmnd *cmd)
{
cmd->serial_number = 0;
scsi_set_resid(cmd, 0);
memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
if (cmd->cmd_len == 0)
cmd->cmd_len = scsi_command_size(cmd->cmnd);
}
/*
* Decrement the host_busy counter and wake up the error handler if necessary.
* Avoid as follows that the error handler is not woken up if shost->host_busy
* == shost->host_failed: use call_rcu() in scsi_eh_scmd_add() in combination
* with an RCU read lock in this function to ensure that this function in its
* entirety either finishes before scsi_eh_scmd_add() increases the
* host_failed counter or that it notices the shost state change made by
* scsi_eh_scmd_add().
*/
static void scsi_dec_host_busy(struct Scsi_Host *shost)
{
unsigned long flags;
rcu_read_lock();
atomic_dec(&shost->host_busy);
if (unlikely(scsi_host_in_recovery(shost))) {
spin_lock_irqsave(shost->host_lock, flags);
if (shost->host_failed || shost->host_eh_scheduled)
scsi_eh_wakeup(shost);
spin_unlock_irqrestore(shost->host_lock, flags);
}
rcu_read_unlock();
}
void scsi_device_unbusy(struct scsi_device *sdev)
{
struct Scsi_Host *shost = sdev->host;
struct scsi_target *starget = scsi_target(sdev);
scsi_dec_host_busy(shost);
if (starget->can_queue > 0)
atomic_dec(&starget->target_busy);
atomic_dec(&sdev->device_busy);
}
static void scsi_kick_queue(struct request_queue *q)
{
if (q->mq_ops)
blk_mq_run_hw_queues(q, false);
else
blk_run_queue(q);
}
/*
* Called for single_lun devices on IO completion. Clear starget_sdev_user,
* and call blk_run_queue for all the scsi_devices on the target -
* including current_sdev first.
*
* Called with *no* scsi locks held.
*/
static void scsi_single_lun_run(struct scsi_device *current_sdev)
{
struct Scsi_Host *shost = current_sdev->host;
struct scsi_device *sdev, *tmp;
struct scsi_target *starget = scsi_target(current_sdev);
unsigned long flags;
spin_lock_irqsave(shost->host_lock, flags);
starget->starget_sdev_user = NULL;
spin_unlock_irqrestore(shost->host_lock, flags);
/*
* Call blk_run_queue for all LUNs on the target, starting with
* current_sdev. We race with others (to set starget_sdev_user),
* but in most cases, we will be first. Ideally, each LU on the
* target would get some limited time or requests on the target.
*/
scsi_kick_queue(current_sdev->request_queue);
spin_lock_irqsave(shost->host_lock, flags);
if (starget->starget_sdev_user)
goto out;
list_for_each_entry_safe(sdev, tmp, &starget->devices,
same_target_siblings) {
if (sdev == current_sdev)
continue;
if (scsi_device_get(sdev))
continue;
spin_unlock_irqrestore(shost->host_lock, flags);
scsi_kick_queue(sdev->request_queue);
spin_lock_irqsave(shost->host_lock, flags);
scsi_device_put(sdev);
}
out:
spin_unlock_irqrestore(shost->host_lock, flags);
}
static inline bool scsi_device_is_busy(struct scsi_device *sdev)
{
if (atomic_read(&sdev->device_busy) >= sdev->queue_depth)
return true;
if (atomic_read(&sdev->device_blocked) > 0)
return true;
return false;
}
static inline bool scsi_target_is_busy(struct scsi_target *starget)
{
if (starget->can_queue > 0) {
if (atomic_read(&starget->target_busy) >= starget->can_queue)
return true;
if (atomic_read(&starget->target_blocked) > 0)
return true;
}
return false;
}
static inline bool scsi_host_is_busy(struct Scsi_Host *shost)
{
if (shost->can_queue > 0 &&
atomic_read(&shost->host_busy) >= shost->can_queue)
return true;
if (atomic_read(&shost->host_blocked) > 0)
return true;
if (shost->host_self_blocked)
return true;
return false;
}
static void scsi_starved_list_run(struct Scsi_Host *shost)
{
LIST_HEAD(starved_list);
struct scsi_device *sdev;
unsigned long flags;
spin_lock_irqsave(shost->host_lock, flags);
list_splice_init(&shost->starved_list, &starved_list);
while (!list_empty(&starved_list)) {
struct request_queue *slq;
/*
* As long as shost is accepting commands and we have
* starved queues, call blk_run_queue. scsi_request_fn
* drops the queue_lock and can add us back to the
* starved_list.
*
* host_lock protects the starved_list and starved_entry.
* scsi_request_fn must get the host_lock before checking
* or modifying starved_list or starved_entry.
*/
if (scsi_host_is_busy(shost))
break;
sdev = list_entry(starved_list.next,
struct scsi_device, starved_entry);
list_del_init(&sdev->starved_entry);
if (scsi_target_is_busy(scsi_target(sdev))) {
list_move_tail(&sdev->starved_entry,
&shost->starved_list);
continue;
}
/*
* Once we drop the host lock, a racing scsi_remove_device()
* call may remove the sdev from the starved list and destroy
* it and the queue. Mitigate by taking a reference to the
* queue and never touching the sdev again after we drop the
* host lock. Note: if __scsi_remove_device() invokes
* blk_cleanup_queue() before the queue is run from this
* function then blk_run_queue() will return immediately since
* blk_cleanup_queue() marks the queue with QUEUE_FLAG_DYING.
*/
slq = sdev->request_queue;
if (!blk_get_queue(slq))
continue;
spin_unlock_irqrestore(shost->host_lock, flags);
scsi_kick_queue(slq);
blk_put_queue(slq);
spin_lock_irqsave(shost->host_lock, flags);
}
/* put any unprocessed entries back */
list_splice(&starved_list, &shost->starved_list);
spin_unlock_irqrestore(shost->host_lock, flags);
}
/*
* Function: scsi_run_queue()
*
* Purpose: Select a proper request queue to serve next
*
* Arguments: q - last request's queue
*
* Returns: Nothing
*
* Notes: The previous command was completely finished, start
* a new one if possible.
*/
static void scsi_run_queue(struct request_queue *q)
{
struct scsi_device *sdev = q->queuedata;
if (scsi_target(sdev)->single_lun)
scsi_single_lun_run(sdev);
if (!list_empty(&sdev->host->starved_list))
scsi_starved_list_run(sdev->host);
if (q->mq_ops)
blk_mq_run_hw_queues(q, false);
else
blk_run_queue(q);
}
void scsi_requeue_run_queue(struct work_struct *work)
{
struct scsi_device *sdev;
struct request_queue *q;
sdev = container_of(work, struct scsi_device, requeue_work);
q = sdev->request_queue;
scsi_run_queue(q);
}
/*
* Function: scsi_requeue_command()
*
* Purpose: Handle post-processing of completed commands.
*
* Arguments: q - queue to operate on
* cmd - command that may need to be requeued.
*
* Returns: Nothing
*
* Notes: After command completion, there may be blocks left
* over which weren't finished by the previous command
* this can be for a number of reasons - the main one is
* I/O errors in the middle of the request, in which case
* we need to request the blocks that come after the bad
* sector.
* Notes: Upon return, cmd is a stale pointer.
*/
static void scsi_requeue_command(struct request_queue *q, struct scsi_cmnd *cmd)
{
struct scsi_device *sdev = cmd->device;
struct request *req = cmd->request;
unsigned long flags;
spin_lock_irqsave(q->queue_lock, flags);
blk_unprep_request(req);
req->special = NULL;
scsi_put_command(cmd);
blk_requeue_request(q, req);
spin_unlock_irqrestore(q->queue_lock, flags);
scsi_run_queue(q);
put_device(&sdev->sdev_gendev);
}
void scsi_run_host_queues(struct Scsi_Host *shost)
{
struct scsi_device *sdev;
shost_for_each_device(sdev, shost)
scsi_run_queue(sdev->request_queue);
}
static void scsi_uninit_cmd(struct scsi_cmnd *cmd)
{
if (!blk_rq_is_passthrough(cmd->request)) {
struct scsi_driver *drv = scsi_cmd_to_driver(cmd);
if (drv->uninit_command)
drv->uninit_command(cmd);
}
}
static void scsi_mq_free_sgtables(struct scsi_cmnd *cmd)
{
struct scsi_data_buffer *sdb;
if (cmd->sdb.table.nents)
sg_free_table_chained(&cmd->sdb.table, true);
if (cmd->request->next_rq) {
sdb = cmd->request->next_rq->special;
if (sdb)
sg_free_table_chained(&sdb->table, true);
}
if (scsi_prot_sg_count(cmd))
sg_free_table_chained(&cmd->prot_sdb->table, true);
}
static void scsi_mq_uninit_cmd(struct scsi_cmnd *cmd)
{
scsi_mq_free_sgtables(cmd);
scsi_uninit_cmd(cmd);
scsi_del_cmd_from_list(cmd);
}
/*
* Function: scsi_release_buffers()
*
* Purpose: Free resources allocate for a scsi_command.
*
* Arguments: cmd - command that we are bailing.
*
* Lock status: Assumed that no lock is held upon entry.
*
* Returns: Nothing
*
* Notes: In the event that an upper level driver rejects a
* command, we must release resources allocated during
* the __init_io() function. Primarily this would involve
* the scatter-gather table.
*/
static void scsi_release_buffers(struct scsi_cmnd *cmd)
{
if (cmd->sdb.table.nents)
sg_free_table_chained(&cmd->sdb.table, false);
memset(&cmd->sdb, 0, sizeof(cmd->sdb));
if (scsi_prot_sg_count(cmd))
sg_free_table_chained(&cmd->prot_sdb->table, false);
}
static void scsi_release_bidi_buffers(struct scsi_cmnd *cmd)
{
struct scsi_data_buffer *bidi_sdb = cmd->request->next_rq->special;
sg_free_table_chained(&bidi_sdb->table, false);
kmem_cache_free(scsi_sdb_cache, bidi_sdb);
cmd->request->next_rq->special = NULL;
}
/* Returns false when no more bytes to process, true if there are more */
static bool scsi_end_request(struct request *req, blk_status_t error,
unsigned int bytes, unsigned int bidi_bytes)
{
struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(req);
struct scsi_device *sdev = cmd->device;
struct request_queue *q = sdev->request_queue;
if (blk_update_request(req, error, bytes))
return true;
/* Bidi request must be completed as a whole */
if (unlikely(bidi_bytes) &&
blk_update_request(req->next_rq, error, bidi_bytes))
return true;
if (blk_queue_add_random(q))
add_disk_randomness(req->rq_disk);
if (!blk_rq_is_scsi(req)) {
WARN_ON_ONCE(!(cmd->flags & SCMD_INITIALIZED));
cmd->flags &= ~SCMD_INITIALIZED;
destroy_rcu_head(&cmd->rcu);
}
if (req->mq_ctx) {
/*
* In the MQ case the command gets freed by __blk_mq_end_request,
* so we have to do all cleanup that depends on it earlier.
*
* We also can't kick the queues from irq context, so we
* will have to defer it to a workqueue.
*/
scsi_mq_uninit_cmd(cmd);
/*
* queue is still alive, so grab the ref for preventing it
* from being cleaned up during running queue.
*/
percpu_ref_get(&q->q_usage_counter);
__blk_mq_end_request(req, error);
if (scsi_target(sdev)->single_lun ||
!list_empty(&sdev->host->starved_list))
kblockd_schedule_work(&sdev->requeue_work);
else
blk_mq_run_hw_queues(q, true);
percpu_ref_put(&q->q_usage_counter);
} else {
unsigned long flags;
if (bidi_bytes)
scsi_release_bidi_buffers(cmd);
scsi_release_buffers(cmd);
scsi_put_command(cmd);
spin_lock_irqsave(q->queue_lock, flags);
blk_finish_request(req, error);
spin_unlock_irqrestore(q->queue_lock, flags);
scsi_run_queue(q);
}
put_device(&sdev->sdev_gendev);
return false;
}
/**
* scsi_result_to_blk_status - translate a SCSI result code into blk_status_t
* @cmd: SCSI command
* @result: scsi error code
*
* Translate a SCSI result code into a blk_status_t value. May reset the host
* byte of @cmd->result.
*/
static blk_status_t scsi_result_to_blk_status(struct scsi_cmnd *cmd, int result)
{
switch (host_byte(result)) {
case DID_OK:
/*
* Also check the other bytes than the status byte in result
* to handle the case when a SCSI LLD sets result to
* DRIVER_SENSE << 24 without setting SAM_STAT_CHECK_CONDITION.
*/
if (scsi_status_is_good(result) && (result & ~0xff) == 0)
return BLK_STS_OK;
return BLK_STS_IOERR;
case DID_TRANSPORT_FAILFAST:
return BLK_STS_TRANSPORT;
case DID_TARGET_FAILURE:
set_host_byte(cmd, DID_OK);
return BLK_STS_TARGET;
case DID_NEXUS_FAILURE:
return BLK_STS_NEXUS;
case DID_ALLOC_FAILURE:
set_host_byte(cmd, DID_OK);
return BLK_STS_NOSPC;
case DID_MEDIUM_ERROR:
set_host_byte(cmd, DID_OK);
return BLK_STS_MEDIUM;
default:
return BLK_STS_IOERR;
}
}
/* Helper for scsi_io_completion() when "reprep" action required. */
static void scsi_io_completion_reprep(struct scsi_cmnd *cmd,
struct request_queue *q)
{
/* A new command will be prepared and issued. */
if (q->mq_ops) {
scsi_mq_requeue_cmd(cmd);
} else {
/* Unprep request and put it back at head of the queue. */
scsi_release_buffers(cmd);
scsi_requeue_command(q, cmd);
}
}
/* Helper for scsi_io_completion() when special action required. */
static void scsi_io_completion_action(struct scsi_cmnd *cmd, int result)
{
struct request_queue *q = cmd->device->request_queue;
struct request *req = cmd->request;
int level = 0;
enum {ACTION_FAIL, ACTION_REPREP, ACTION_RETRY,
ACTION_DELAYED_RETRY} action;
unsigned long wait_for = (cmd->allowed + 1) * req->timeout;
struct scsi_sense_hdr sshdr;
bool sense_valid;
bool sense_current = true; /* false implies "deferred sense" */
blk_status_t blk_stat;
sense_valid = scsi_command_normalize_sense(cmd, &sshdr);
if (sense_valid)
sense_current = !scsi_sense_is_deferred(&sshdr);
blk_stat = scsi_result_to_blk_status(cmd, result);
if (host_byte(result) == DID_RESET) {
/* Third party bus reset or reset for error recovery
* reasons. Just retry the command and see what
* happens.
*/
action = ACTION_RETRY;
} else if (sense_valid && sense_current) {
switch (sshdr.sense_key) {
case UNIT_ATTENTION:
if (cmd->device->removable) {
/* Detected disc change. Set a bit
* and quietly refuse further access.
*/
cmd->device->changed = 1;
action = ACTION_FAIL;
} else {
/* Must have been a power glitch, or a
* bus reset. Could not have been a
* media change, so we just retry the
* command and see what happens.
*/
action = ACTION_RETRY;
}
break;
case ILLEGAL_REQUEST:
/* If we had an ILLEGAL REQUEST returned, then
* we may have performed an unsupported
* command. The only thing this should be
* would be a ten byte read where only a six
* byte read was supported. Also, on a system
* where READ CAPACITY failed, we may have
* read past the end of the disk.
*/
if ((cmd->device->use_10_for_rw &&
sshdr.asc == 0x20 && sshdr.ascq == 0x00) &&
(cmd->cmnd[0] == READ_10 ||
cmd->cmnd[0] == WRITE_10)) {
/* This will issue a new 6-byte command. */
cmd->device->use_10_for_rw = 0;
action = ACTION_REPREP;
} else if (sshdr.asc == 0x10) /* DIX */ {
action = ACTION_FAIL;
blk_stat = BLK_STS_PROTECTION;
/* INVALID COMMAND OPCODE or INVALID FIELD IN CDB */
} else if (sshdr.asc == 0x20 || sshdr.asc == 0x24) {
action = ACTION_FAIL;
blk_stat = BLK_STS_TARGET;
} else
action = ACTION_FAIL;
break;
case ABORTED_COMMAND:
action = ACTION_FAIL;
if (sshdr.asc == 0x10) /* DIF */
blk_stat = BLK_STS_PROTECTION;
break;
case NOT_READY:
/* If the device is in the process of becoming
* ready, or has a temporary blockage, retry.
*/
if (sshdr.asc == 0x04) {
switch (sshdr.ascq) {
case 0x01: /* becoming ready */
case 0x04: /* format in progress */
case 0x05: /* rebuild in progress */
case 0x06: /* recalculation in progress */
case 0x07: /* operation in progress */
case 0x08: /* Long write in progress */
case 0x09: /* self test in progress */
case 0x14: /* space allocation in progress */
case 0x1a: /* start stop unit in progress */
case 0x1b: /* sanitize in progress */
case 0x1d: /* configuration in progress */
case 0x24: /* depopulation in progress */
action = ACTION_DELAYED_RETRY;
break;
default:
action = ACTION_FAIL;
break;
}
} else
action = ACTION_FAIL;
break;
case VOLUME_OVERFLOW:
/* See SSC3rXX or current. */
action = ACTION_FAIL;
break;
default:
action = ACTION_FAIL;
break;
}
} else
action = ACTION_FAIL;
if (action != ACTION_FAIL &&
time_before(cmd->jiffies_at_alloc + wait_for, jiffies))
action = ACTION_FAIL;
switch (action) {
case ACTION_FAIL:
/* Give up and fail the remainder of the request */
if (!(req->rq_flags & RQF_QUIET)) {
static DEFINE_RATELIMIT_STATE(_rs,
DEFAULT_RATELIMIT_INTERVAL,
DEFAULT_RATELIMIT_BURST);
if (unlikely(scsi_logging_level))
level =
SCSI_LOG_LEVEL(SCSI_LOG_MLCOMPLETE_SHIFT,
SCSI_LOG_MLCOMPLETE_BITS);
/*
* if logging is enabled the failure will be printed
* in scsi_log_completion(), so avoid duplicate messages
*/
if (!level && __ratelimit(&_rs)) {
scsi_print_result(cmd, NULL, FAILED);
if (driver_byte(result) == DRIVER_SENSE)
scsi_print_sense(cmd);
scsi_print_command(cmd);
}
}
if (!scsi_end_request(req, blk_stat, blk_rq_err_bytes(req), 0))
return;
/*FALLTHRU*/
case ACTION_REPREP:
scsi_io_completion_reprep(cmd, q);
break;
case ACTION_RETRY:
/* Retry the same command immediately */
__scsi_queue_insert(cmd, SCSI_MLQUEUE_EH_RETRY, false);
break;
case ACTION_DELAYED_RETRY:
/* Retry the same command after a delay */
__scsi_queue_insert(cmd, SCSI_MLQUEUE_DEVICE_BUSY, false);
break;
}
}
/*
* Helper for scsi_io_completion() when cmd->result is non-zero. Returns a
* new result that may suppress further error checking. Also modifies
* *blk_statp in some cases.
*/
static int scsi_io_completion_nz_result(struct scsi_cmnd *cmd, int result,
blk_status_t *blk_statp)
{
bool sense_valid;
bool sense_current = true; /* false implies "deferred sense" */
struct request *req = cmd->request;
struct scsi_sense_hdr sshdr;
sense_valid = scsi_command_normalize_sense(cmd, &sshdr);
if (sense_valid)
sense_current = !scsi_sense_is_deferred(&sshdr);
if (blk_rq_is_passthrough(req)) {
if (sense_valid) {
/*
* SG_IO wants current and deferred errors
*/
scsi_req(req)->sense_len =
min(8 + cmd->sense_buffer[7],
SCSI_SENSE_BUFFERSIZE);
}
if (sense_current)
*blk_statp = scsi_result_to_blk_status(cmd, result);
} else if (blk_rq_bytes(req) == 0 && sense_current) {
/*
* Flush commands do not transfers any data, and thus cannot use
* good_bytes != blk_rq_bytes(req) as the signal for an error.
* This sets *blk_statp explicitly for the problem case.
*/
*blk_statp = scsi_result_to_blk_status(cmd, result);
}
/*
* Recovered errors need reporting, but they're always treated as
* success, so fiddle the result code here. For passthrough requests
* we already took a copy of the original into sreq->result which
* is what gets returned to the user
*/
if (sense_valid && (sshdr.sense_key == RECOVERED_ERROR)) {
bool do_print = true;
/*
* if ATA PASS-THROUGH INFORMATION AVAILABLE [0x0, 0x1d]
* skip print since caller wants ATA registers. Only occurs
* on SCSI ATA PASS_THROUGH commands when CK_COND=1
*/
if ((sshdr.asc == 0x0) && (sshdr.ascq == 0x1d))
do_print = false;
else if (req->rq_flags & RQF_QUIET)
do_print = false;
if (do_print)
scsi_print_sense(cmd);
result = 0;
/* for passthrough, *blk_statp may be set */
*blk_statp = BLK_STS_OK;
}
/*
* Another corner case: the SCSI status byte is non-zero but 'good'.
* Example: PRE-FETCH command returns SAM_STAT_CONDITION_MET when
* it is able to fit nominated LBs in its cache (and SAM_STAT_GOOD
* if it can't fit). Treat SAM_STAT_CONDITION_MET and the related
* intermediate statuses (both obsolete in SAM-4) as good.
*/
if (status_byte(result) && scsi_status_is_good(result)) {
result = 0;
*blk_statp = BLK_STS_OK;
}
return result;
}
/*
* Function: scsi_io_completion()
*
* Purpose: Completion processing for block device I/O requests.
*
* Arguments: cmd - command that is finished.
*
* Lock status: Assumed that no lock is held upon entry.
*
* Returns: Nothing
*
* Notes: We will finish off the specified number of sectors. If we
* are done, the command block will be released and the queue
* function will be goosed. If we are not done then we have to
* figure out what to do next:
*
* a) We can call scsi_requeue_command(). The request
* will be unprepared and put back on the queue. Then
* a new command will be created for it. This should
* be used if we made forward progress, or if we want
* to switch from READ(10) to READ(6) for example.
*
* b) We can call __scsi_queue_insert(). The request will
* be put back on the queue and retried using the same
* command as before, possibly after a delay.
*
* c) We can call scsi_end_request() with blk_stat other than
* BLK_STS_OK, to fail the remainder of the request.
*/
void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
{
int result = cmd->result;
struct request_queue *q = cmd->device->request_queue;
struct request *req = cmd->request;
blk_status_t blk_stat = BLK_STS_OK;
if (unlikely(result)) /* a nz result may or may not be an error */
result = scsi_io_completion_nz_result(cmd, result, &blk_stat);
if (unlikely(blk_rq_is_passthrough(req))) {
/*
* scsi_result_to_blk_status may have reset the host_byte
*/
scsi_req(req)->result = cmd->result;
scsi_req(req)->resid_len = scsi_get_resid(cmd);
if (unlikely(scsi_bidi_cmnd(cmd))) {
/*
* Bidi commands Must be complete as a whole,
* both sides at once.
*/
scsi_req(req->next_rq)->resid_len = scsi_in(cmd)->resid;
if (scsi_end_request(req, BLK_STS_OK, blk_rq_bytes(req),
blk_rq_bytes(req->next_rq)))
WARN_ONCE(true,
"Bidi command with remaining bytes");
return;
}
}
/* no bidi support yet, other than in pass-through */
if (unlikely(blk_bidi_rq(req))) {
WARN_ONCE(true, "Only support bidi command in passthrough");
scmd_printk(KERN_ERR, cmd, "Killing bidi command\n");
if (scsi_end_request(req, BLK_STS_IOERR, blk_rq_bytes(req),
blk_rq_bytes(req->next_rq)))
WARN_ONCE(true, "Bidi command with remaining bytes");
return;
}
/*
* Next deal with any sectors which we were able to correctly
* handle.
*/
SCSI_LOG_HLCOMPLETE(1, scmd_printk(KERN_INFO, cmd,
"%u sectors total, %d bytes done.\n",
blk_rq_sectors(req), good_bytes));
/*
* Next deal with any sectors which we were able to correctly
* handle. Failed, zero length commands always need to drop down
* to retry code. Fast path should return in this block.
*/
if (likely(blk_rq_bytes(req) > 0 || blk_stat == BLK_STS_OK)) {
if (likely(!scsi_end_request(req, blk_stat, good_bytes, 0)))
return; /* no bytes remaining */
}
/* Kill remainder if no retries. */
if (unlikely(blk_stat && scsi_noretry_cmd(cmd))) {
if (scsi_end_request(req, blk_stat, blk_rq_bytes(req), 0))
WARN_ONCE(true,
"Bytes remaining after failed, no-retry command");
return;
}
/*
* If there had been no error, but we have leftover bytes in the
* requeues just queue the command up again.
*/
if (likely(result == 0))
scsi_io_completion_reprep(cmd, q);
else
scsi_io_completion_action(cmd, result);
}
static int scsi_init_sgtable(struct request *req, struct scsi_data_buffer *sdb)
{
int count;
/*
* If sg table allocation fails, requeue request later.
*/
if (unlikely(sg_alloc_table_chained(&sdb->table,
blk_rq_nr_phys_segments(req), sdb->table.sgl)))
return BLKPREP_DEFER;
/*
* Next, walk the list, and fill in the addresses and sizes of
* each segment.
*/
count = blk_rq_map_sg(req->q, req, sdb->table.sgl);
BUG_ON(count > sdb->table.nents);
sdb->table.nents = count;
sdb->length = blk_rq_payload_bytes(req);
return BLKPREP_OK;
}
/*
* Function: scsi_init_io()
*
* Purpose: SCSI I/O initialize function.
*
* Arguments: cmd - Command descriptor we wish to initialize
*
* Returns: 0 on success
* BLKPREP_DEFER if the failure is retryable
* BLKPREP_KILL if the failure is fatal
*/
int scsi_init_io(struct scsi_cmnd *cmd)
{
struct scsi_device *sdev = cmd->device;
struct request *rq = cmd->request;
bool is_mq = (rq->mq_ctx != NULL);
int error = BLKPREP_KILL;
if (WARN_ON_ONCE(!blk_rq_nr_phys_segments(rq)))
goto err_exit;
error = scsi_init_sgtable(rq, &cmd->sdb);
if (error)
goto err_exit;
if (blk_bidi_rq(rq)) {
if (!rq->q->mq_ops) {
struct scsi_data_buffer *bidi_sdb =
kmem_cache_zalloc(scsi_sdb_cache, GFP_ATOMIC);
if (!bidi_sdb) {
error = BLKPREP_DEFER;
goto err_exit;
}
rq->next_rq->special = bidi_sdb;
}
error = scsi_init_sgtable(rq->next_rq, rq->next_rq->special);
if (error)
goto err_exit;
}
if (blk_integrity_rq(rq)) {
struct scsi_data_buffer *prot_sdb = cmd->prot_sdb;
int ivecs, count;
if (prot_sdb == NULL) {
/*
* This can happen if someone (e.g. multipath)
* queues a command to a device on an adapter
* that does not support DIX.
*/
WARN_ON_ONCE(1);
error = BLKPREP_KILL;
goto err_exit;
}
ivecs = blk_rq_count_integrity_sg(rq->q, rq->bio);
if (sg_alloc_table_chained(&prot_sdb->table, ivecs,
prot_sdb->table.sgl)) {
error = BLKPREP_DEFER;
goto err_exit;
}
count = blk_rq_map_integrity_sg(rq->q, rq->bio,
prot_sdb->table.sgl);
BUG_ON(count > ivecs);
BUG_ON(count > queue_max_integrity_segments(rq->q));
cmd->prot_sdb = prot_sdb;
cmd->prot_sdb->table.nents = count;
}
return BLKPREP_OK;
err_exit:
if (is_mq) {
scsi_mq_free_sgtables(cmd);
} else {
scsi_release_buffers(cmd);
cmd->request->special = NULL;
scsi_put_command(cmd);
put_device(&sdev->sdev_gendev);
}
return error;
}
EXPORT_SYMBOL(scsi_init_io);
/**
* scsi_initialize_rq - initialize struct scsi_cmnd partially
* @rq: Request associated with the SCSI command to be initialized.
*
* This function initializes the members of struct scsi_cmnd that must be
* initialized before request processing starts and that won't be
* reinitialized if a SCSI command is requeued.
*
* Called from inside blk_get_request() for pass-through requests and from
* inside scsi_init_command() for filesystem requests.
*/
static void scsi_initialize_rq(struct request *rq)
{
struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(rq);
scsi_req_init(&cmd->req);
init_rcu_head(&cmd->rcu);
cmd->jiffies_at_alloc = jiffies;
cmd->retries = 0;
}
/* Add a command to the list used by the aacraid and dpt_i2o drivers */
void scsi_add_cmd_to_list(struct scsi_cmnd *cmd)
{
struct scsi_device *sdev = cmd->device;
struct Scsi_Host *shost = sdev->host;
unsigned long flags;
if (shost->use_cmd_list) {
spin_lock_irqsave(&sdev->list_lock, flags);
list_add_tail(&cmd->list, &sdev->cmd_list);
spin_unlock_irqrestore(&sdev->list_lock, flags);
}
}
/* Remove a command from the list used by the aacraid and dpt_i2o drivers */
void scsi_del_cmd_from_list(struct scsi_cmnd *cmd)
{
struct scsi_device *sdev = cmd->device;
struct Scsi_Host *shost = sdev->host;
unsigned long flags;
if (shost->use_cmd_list) {
spin_lock_irqsave(&sdev->list_lock, flags);
BUG_ON(list_empty(&cmd->list));
list_del_init(&cmd->list);
spin_unlock_irqrestore(&sdev->list_lock, flags);
}
}
/* Called after a request has been started. */
void scsi_init_command(struct scsi_device *dev, struct scsi_cmnd *cmd)
{
void *buf = cmd->sense_buffer;
void *prot = cmd->prot_sdb;
struct request *rq = blk_mq_rq_from_pdu(cmd);
unsigned int flags = cmd->flags & SCMD_PRESERVED_FLAGS;
unsigned long jiffies_at_alloc;
int retries;
if (!blk_rq_is_scsi(rq) && !(flags & SCMD_INITIALIZED)) {
flags |= SCMD_INITIALIZED;
scsi_initialize_rq(rq);
}
jiffies_at_alloc = cmd->jiffies_at_alloc;
retries = cmd->retries;
/* zero out the cmd, except for the embedded scsi_request */
memset((char *)cmd + sizeof(cmd->req), 0,
sizeof(*cmd) - sizeof(cmd->req) + dev->host->hostt->cmd_size);
cmd->device = dev;
cmd->sense_buffer = buf;
cmd->prot_sdb = prot;
cmd->flags = flags;
INIT_DELAYED_WORK(&cmd->abort_work, scmd_eh_abort_handler);
cmd->jiffies_at_alloc = jiffies_at_alloc;
cmd->retries = retries;
scsi_add_cmd_to_list(cmd);
}
static int scsi_setup_scsi_cmnd(struct scsi_device *sdev, struct request *req)
{
struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(req);
/*
* Passthrough requests may transfer data, in which case they must
* a bio attached to them. Or they might contain a SCSI command
* that does not transfer data, in which case they may optionally
* submit a request without an attached bio.
*/
if (req->bio) {
int ret = scsi_init_io(cmd);
if (unlikely(ret))
return ret;
} else {
BUG_ON(blk_rq_bytes(req));
memset(&cmd->sdb, 0, sizeof(cmd->sdb));
}
cmd->cmd_len = scsi_req(req)->cmd_len;
cmd->cmnd = scsi_req(req)->cmd;
cmd->transfersize = blk_rq_bytes(req);
cmd->allowed = scsi_req(req)->retries;
return BLKPREP_OK;
}
/*
* Setup a normal block command. These are simple request from filesystems
* that still need to be translated to SCSI CDBs from the ULD.
*/
static int scsi_setup_fs_cmnd(struct scsi_device *sdev, struct request *req)
{
struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(req);
if (unlikely(sdev->handler && sdev->handler->prep_fn)) {
int ret = sdev->handler->prep_fn(sdev, req);
if (ret != BLKPREP_OK)
return ret;
}
cmd->cmnd = scsi_req(req)->cmd = scsi_req(req)->__cmd;
memset(cmd->cmnd, 0, BLK_MAX_CDB);
return scsi_cmd_to_driver(cmd)->init_command(cmd);
}
static int scsi_setup_cmnd(struct scsi_device *sdev, struct request *req)
{
struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(req);
if (!blk_rq_bytes(req))
cmd->sc_data_direction = DMA_NONE;
else if (rq_data_dir(req) == WRITE)
cmd->sc_data_direction = DMA_TO_DEVICE;
else
cmd->sc_data_direction = DMA_FROM_DEVICE;
if (blk_rq_is_scsi(req))
return scsi_setup_scsi_cmnd(sdev, req);
else
return scsi_setup_fs_cmnd(sdev, req);
}
static int
scsi_prep_state_check(struct scsi_device *sdev, struct request *req)
{
int ret = BLKPREP_OK;
/*
* If the device is not in running state we will reject some
* or all commands.
*/
if (unlikely(sdev->sdev_state != SDEV_RUNNING)) {
switch (sdev->sdev_state) {
case SDEV_OFFLINE:
case SDEV_TRANSPORT_OFFLINE:
/*
* If the device is offline we refuse to process any
* commands. The device must be brought online
* before trying any recovery commands.
*/
sdev_printk(KERN_ERR, sdev,
"rejecting I/O to offline device\n");
ret = BLKPREP_KILL;
break;
case SDEV_DEL:
/*
* If the device is fully deleted, we refuse to
* process any commands as well.
*/
sdev_printk(KERN_ERR, sdev,
"rejecting I/O to dead device\n");
ret = BLKPREP_KILL;
break;
case SDEV_BLOCK:
case SDEV_CREATED_BLOCK:
ret = BLKPREP_DEFER;
break;
case SDEV_QUIESCE:
/*
* If the devices is blocked we defer normal commands.
*/
if (req && !(req->rq_flags & RQF_PREEMPT))
ret = BLKPREP_DEFER;
break;
default:
/*
* For any other not fully online state we only allow
* special commands. In particular any user initiated
* command is not allowed.
*/
if (req && !(req->rq_flags & RQF_PREEMPT))
ret = BLKPREP_KILL;
break;
}
}
return ret;
}
static int
scsi_prep_return(struct request_queue *q, struct request *req, int ret)
{
struct scsi_device *sdev = q->queuedata;
switch (ret) {
case BLKPREP_KILL:
case BLKPREP_INVALID:
scsi_req(req)->result = DID_NO_CONNECT << 16;
/* release the command and kill it */
if (req->special) {
struct scsi_cmnd *cmd = req->special;
scsi_release_buffers(cmd);
scsi_put_command(cmd);
put_device(&sdev->sdev_gendev);
req->special = NULL;
}
break;
case BLKPREP_DEFER:
/*
* If we defer, the blk_peek_request() returns NULL, but the
* queue must be restarted, so we schedule a callback to happen
* shortly.
*/
if (atomic_read(&sdev->device_busy) == 0)
blk_delay_queue(q, SCSI_QUEUE_DELAY);
break;
default:
req->rq_flags |= RQF_DONTPREP;
}
return ret;
}
static int scsi_prep_fn(struct request_queue *q, struct request *req)
{
struct scsi_device *sdev = q->queuedata;
struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(req);
int ret;
ret = scsi_prep_state_check(sdev, req);
if (ret != BLKPREP_OK)
goto out;
if (!req->special) {
/* Bail if we can't get a reference to the device */
if (unlikely(!get_device(&sdev->sdev_gendev))) {
ret = BLKPREP_DEFER;
goto out;
}
scsi_init_command(sdev, cmd);
req->special = cmd;
}
cmd->tag = req->tag;
cmd->request = req;
cmd->prot_op = SCSI_PROT_NORMAL;
ret = scsi_setup_cmnd(sdev, req);
out:
return scsi_prep_return(q, req, ret);
}
static void scsi_unprep_fn(struct request_queue *q, struct request *req)
{
scsi_uninit_cmd(blk_mq_rq_to_pdu(req));
}
/*
* scsi_dev_queue_ready: if we can send requests to sdev, return 1 else
* return 0.
*
* Called with the queue_lock held.
*/
static inline int scsi_dev_queue_ready(struct request_queue *q,
struct scsi_device *sdev)
{
unsigned int busy;
busy = atomic_inc_return(&sdev->device_busy) - 1;
if (atomic_read(&sdev->device_blocked)) {
if (busy)
goto out_dec;
/*
* unblock after device_blocked iterates to zero
*/
if (atomic_dec_return(&sdev->device_blocked) > 0) {
/*
* For the MQ case we take care of this in the caller.
*/
if (!q->mq_ops)
blk_delay_queue(q, SCSI_QUEUE_DELAY);
goto out_dec;
}
SCSI_LOG_MLQUEUE(3, sdev_printk(KERN_INFO, sdev,
"unblocking device at zero depth\n"));
}
if (busy >= sdev->queue_depth)
goto out_dec;
return 1;
out_dec:
atomic_dec(&sdev->device_busy);
return 0;
}
/*
* scsi_target_queue_ready: checks if there we can send commands to target
* @sdev: scsi device on starget to check.
*/
static inline int scsi_target_queue_ready(struct Scsi_Host *shost,
struct scsi_device *sdev)
{
struct scsi_target *starget = scsi_target(sdev);
unsigned int busy;
if (starget->single_lun) {
spin_lock_irq(shost->host_lock);
if (starget->starget_sdev_user &&
starget->starget_sdev_user != sdev) {
spin_unlock_irq(shost->host_lock);
return 0;
}
starget->starget_sdev_user = sdev;
spin_unlock_irq(shost->host_lock);
}
if (starget->can_queue <= 0)
return 1;
busy = atomic_inc_return(&starget->target_busy) - 1;
if (atomic_read(&starget->target_blocked) > 0) {
if (busy)
goto starved;
/*
* unblock after target_blocked iterates to zero
*/
if (atomic_dec_return(&starget->target_blocked) > 0)
goto out_dec;
SCSI_LOG_MLQUEUE(3, starget_printk(KERN_INFO, starget,
"unblocking target at zero depth\n"));
}
if (busy >= starget->can_queue)
goto starved;
return 1;
starved:
spin_lock_irq(shost->host_lock);
list_move_tail(&sdev->starved_entry, &shost->starved_list);
spin_unlock_irq(shost->host_lock);
out_dec:
if (starget->can_queue > 0)
atomic_dec(&starget->target_busy);
return 0;
}
/*
* scsi_host_queue_ready: if we can send requests to shost, return 1 else
* return 0. We must end up running the queue again whenever 0 is
* returned, else IO can hang.
*/
static inline int scsi_host_queue_ready(struct request_queue *q,
struct Scsi_Host *shost,
struct scsi_device *sdev)
{
unsigned int busy;
if (scsi_host_in_recovery(shost))
return 0;
busy = atomic_inc_return(&shost->host_busy) - 1;
if (atomic_read(&shost->host_blocked) > 0) {
if (busy)
goto starved;
/*
* unblock after host_blocked iterates to zero
*/
if (atomic_dec_return(&shost->host_blocked) > 0)
goto out_dec;
SCSI_LOG_MLQUEUE(3,
shost_printk(KERN_INFO, shost,
"unblocking host at zero depth\n"));
}
if (shost->can_queue > 0 && busy >= shost->can_queue)
goto starved;
if (shost->host_self_blocked)
goto starved;
/* We're OK to process the command, so we can't be starved */
if (!list_empty(&sdev->starved_entry)) {
spin_lock_irq(shost->host_lock);
if (!list_empty(&sdev->starved_entry))
list_del_init(&sdev->starved_entry);
spin_unlock_irq(shost->host_lock);
}
return 1;
starved:
spin_lock_irq(shost->host_lock);
if (list_empty(&sdev->starved_entry))
list_add_tail(&sdev->starved_entry, &shost->starved_list);
spin_unlock_irq(shost->host_lock);
out_dec:
scsi_dec_host_busy(shost);
return 0;
}
/*
* Busy state exporting function for request stacking drivers.
*
* For efficiency, no lock is taken to check the busy state of
* shost/starget/sdev, since the returned value is not guaranteed and
* may be changed after request stacking drivers call the function,
* regardless of taking lock or not.
*
* When scsi can't dispatch I/Os anymore and needs to kill I/Os scsi
* needs to return 'not busy'. Otherwise, request stacking drivers
* may hold requests forever.
*/
static int scsi_lld_busy(struct request_queue *q)
{
struct scsi_device *sdev = q->queuedata;
struct Scsi_Host *shost;
if (blk_queue_dying(q))
return 0;
shost = sdev->host;
/*
* Ignore host/starget busy state.
* Since block layer does not have a concept of fairness across
* multiple queues, congestion of host/starget needs to be handled
* in SCSI layer.
*/
if (scsi_host_in_recovery(shost) || scsi_device_is_busy(sdev))
return 1;
return 0;
}
/*
* Kill a request for a dead device
*/
static void scsi_kill_request(struct request *req, struct request_queue *q)
{
struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(req);
struct scsi_device *sdev;
struct scsi_target *starget;
struct Scsi_Host *shost;
blk_start_request(req);
scmd_printk(KERN_INFO, cmd, "killing request\n");
sdev = cmd->device;
starget = scsi_target(sdev);
shost = sdev->host;
scsi_init_cmd_errh(cmd);
cmd->result = DID_NO_CONNECT << 16;
atomic_inc(&cmd->device->iorequest_cnt);
/*
* SCSI request completion path will do scsi_device_unbusy(),
* bump busy counts. To bump the counters, we need to dance
* with the locks as normal issue path does.
*/
atomic_inc(&sdev->device_busy);
atomic_inc(&shost->host_busy);
if (starget->can_queue > 0)
atomic_inc(&starget->target_busy);
blk_complete_request(req);
}
static void scsi_softirq_done(struct request *rq)
{
struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(rq);
unsigned long wait_for = (cmd->allowed + 1) * rq->timeout;
int disposition;
INIT_LIST_HEAD(&cmd->eh_entry);
atomic_inc(&cmd->device->iodone_cnt);
if (cmd->result)
atomic_inc(&cmd->device->ioerr_cnt);
disposition = scsi_decide_disposition(cmd);
if (disposition != SUCCESS &&
time_before(cmd->jiffies_at_alloc + wait_for, jiffies)) {
sdev_printk(KERN_ERR, cmd->device,
"timing out command, waited %lus\n",
wait_for/HZ);
disposition = SUCCESS;
}
scsi_log_completion(cmd, disposition);
switch (disposition) {
case SUCCESS:
scsi_finish_command(cmd);
break;
case NEEDS_RETRY:
scsi_queue_insert(cmd, SCSI_MLQUEUE_EH_RETRY);
break;
case ADD_TO_MLQUEUE:
scsi_queue_insert(cmd, SCSI_MLQUEUE_DEVICE_BUSY);
break;
default:
scsi_eh_scmd_add(cmd);
break;
}
}
/**
* scsi_dispatch_command - Dispatch a command to the low-level driver.
* @cmd: command block we are dispatching.
*
* Return: nonzero return request was rejected and device's queue needs to be
* plugged.
*/
static int scsi_dispatch_cmd(struct scsi_cmnd *cmd)
{
struct Scsi_Host *host = cmd->device->host;
int rtn = 0;
atomic_inc(&cmd->device->iorequest_cnt);
/* check if the device is still usable */
if (unlikely(cmd->device->sdev_state == SDEV_DEL)) {
/* in SDEV_DEL we error all commands. DID_NO_CONNECT
* returns an immediate error upwards, and signals
* that the device is no longer present */
cmd->result = DID_NO_CONNECT << 16;
goto done;
}
/* Check to see if the scsi lld made this device blocked. */
if (unlikely(scsi_device_blocked(cmd->device))) {
/*
* in blocked state, the command is just put back on
* the device queue. The suspend state has already
* blocked the queue so future requests should not
* occur until the device transitions out of the
* suspend state.
*/
SCSI_LOG_MLQUEUE(3, scmd_printk(KERN_INFO, cmd,
"queuecommand : device blocked\n"));
return SCSI_MLQUEUE_DEVICE_BUSY;
}
/* Store the LUN value in cmnd, if needed. */
if (cmd->device->lun_in_cdb)
cmd->cmnd[1] = (cmd->cmnd[1] & 0x1f) |
(cmd->device->lun << 5 & 0xe0);
scsi_log_send(cmd);
/*
* Before we queue this command, check if the command
* length exceeds what the host adapter can handle.
*/
if (cmd->cmd_len > cmd->device->host->max_cmd_len) {
SCSI_LOG_MLQUEUE(3, scmd_printk(KERN_INFO, cmd,
"queuecommand : command too long. "
"cdb_size=%d host->max_cmd_len=%d\n",
cmd->cmd_len, cmd->device->host->max_cmd_len));
cmd->result = (DID_ABORT << 16);
goto done;
}
if (unlikely(host->shost_state == SHOST_DEL)) {
cmd->result = (DID_NO_CONNECT << 16);
goto done;
}
trace_scsi_dispatch_cmd_start(cmd);
rtn = host->hostt->queuecommand(host, cmd);
if (rtn) {
trace_scsi_dispatch_cmd_error(cmd, rtn);
if (rtn != SCSI_MLQUEUE_DEVICE_BUSY &&
rtn != SCSI_MLQUEUE_TARGET_BUSY)
rtn = SCSI_MLQUEUE_HOST_BUSY;
SCSI_LOG_MLQUEUE(3, scmd_printk(KERN_INFO, cmd,
"queuecommand : request rejected\n"));
}
return rtn;
done:
cmd->scsi_done(cmd);
return 0;
}
/**
* scsi_done - Invoke completion on finished SCSI command.
* @cmd: The SCSI Command for which a low-level device driver (LLDD) gives
* ownership back to SCSI Core -- i.e. the LLDD has finished with it.
*
* Description: This function is the mid-level's (SCSI Core) interrupt routine,
* which regains ownership of the SCSI command (de facto) from a LLDD, and
* calls blk_complete_request() for further processing.
*
* This function is interrupt context safe.
*/
static void scsi_done(struct scsi_cmnd *cmd)
{
trace_scsi_dispatch_cmd_done(cmd);
blk_complete_request(cmd->request);
}
/*
* Function: scsi_request_fn()
*
* Purpose: Main strategy routine for SCSI.
*
* Arguments: q - Pointer to actual queue.
*
* Returns: Nothing
*
* Lock status: request queue lock assumed to be held when called.
*
* Note: See sd_zbc.c sd_zbc_write_lock_zone() for write order
* protection for ZBC disks.
*/
static void scsi_request_fn(struct request_queue *q)
__releases(q->queue_lock)
__acquires(q->queue_lock)
{
struct scsi_device *sdev = q->queuedata;
struct Scsi_Host *shost;
struct scsi_cmnd *cmd;
struct request *req;
/*
* To start with, we keep looping until the queue is empty, or until
* the host is no longer able to accept any more requests.
*/
shost = sdev->host;
for (;;) {
int rtn;
/*
* get next queueable request. We do this early to make sure
* that the request is fully prepared even if we cannot
* accept it.
*/
req = blk_peek_request(q);
if (!req)
break;
if (unlikely(!scsi_device_online(sdev))) {
sdev_printk(KERN_ERR, sdev,
"rejecting I/O to offline device\n");
scsi_kill_request(req, q);
continue;
}
if (!scsi_dev_queue_ready(q, sdev))
break;
/*
* Remove the request from the request list.
*/
if (!(blk_queue_tagged(q) && !blk_queue_start_tag(q, req)))
blk_start_request(req);
spin_unlock_irq(q->queue_lock);
cmd = blk_mq_rq_to_pdu(req);
if (cmd != req->special) {
printk(KERN_CRIT "impossible request in %s.\n"
"please mail a stack trace to "
"linux-scsi@vger.kernel.org\n",
__func__);
blk_dump_rq_flags(req, "foo");
BUG();
}
/*
* We hit this when the driver is using a host wide
* tag map. For device level tag maps the queue_depth check
* in the device ready fn would prevent us from trying
* to allocate a tag. Since the map is a shared host resource
* we add the dev to the starved list so it eventually gets
* a run when a tag is freed.
*/
if (blk_queue_tagged(q) && !(req->rq_flags & RQF_QUEUED)) {
spin_lock_irq(shost->host_lock);
if (list_empty(&sdev->starved_entry))
list_add_tail(&sdev->starved_entry,
&shost->starved_list);
spin_unlock_irq(shost->host_lock);
goto not_ready;
}
if (!scsi_target_queue_ready(shost, sdev))
goto not_ready;
if (!scsi_host_queue_ready(q, shost, sdev))
goto host_not_ready;
if (sdev->simple_tags)
cmd->flags |= SCMD_TAGGED;
else
cmd->flags &= ~SCMD_TAGGED;
/*
* Finally, initialize any error handling parameters, and set up
* the timers for timeouts.
*/
scsi_init_cmd_errh(cmd);
/*
* Dispatch the command to the low-level driver.
*/
cmd->scsi_done = scsi_done;
rtn = scsi_dispatch_cmd(cmd);
if (rtn) {
scsi_queue_insert(cmd, rtn);
spin_lock_irq(q->queue_lock);
goto out_delay;
}
spin_lock_irq(q->queue_lock);
}
return;
host_not_ready:
if (scsi_target(sdev)->can_queue > 0)
atomic_dec(&scsi_target(sdev)->target_busy);
not_ready:
/*
* lock q, handle tag, requeue req, and decrement device_busy. We
* must return with queue_lock held.
*
* Decrementing device_busy without checking it is OK, as all such
* cases (host limits or settings) should run the queue at some
* later time.
*/
spin_lock_irq(q->queue_lock);
blk_requeue_request(q, req);
atomic_dec(&sdev->device_busy);
out_delay:
if (!atomic_read(&sdev->device_busy) && !scsi_device_blocked(sdev))
blk_delay_queue(q, SCSI_QUEUE_DELAY);
}
static inline blk_status_t prep_to_mq(int ret)
{
switch (ret) {
case BLKPREP_OK:
return BLK_STS_OK;
case BLKPREP_DEFER:
return BLK_STS_RESOURCE;
default:
return BLK_STS_IOERR;
}
}
/* Size in bytes of the sg-list stored in the scsi-mq command-private data. */
static unsigned int scsi_mq_sgl_size(struct Scsi_Host *shost)
{
return min_t(unsigned int, shost->sg_tablesize, SG_CHUNK_SIZE) *
sizeof(struct scatterlist);
}
static int scsi_mq_prep_fn(struct request *req)
{
struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(req);
struct scsi_device *sdev = req->q->queuedata;
struct Scsi_Host *shost = sdev->host;
struct scatterlist *sg;
scsi_init_command(sdev, cmd);
req->special = cmd;
cmd->request = req;
cmd->tag = req->tag;
cmd->prot_op = SCSI_PROT_NORMAL;
sg = (void *)cmd + sizeof(struct scsi_cmnd) + shost->hostt->cmd_size;
cmd->sdb.table.sgl = sg;
if (scsi_host_get_prot(shost)) {
memset(cmd->prot_sdb, 0, sizeof(struct scsi_data_buffer));
cmd->prot_sdb->table.sgl =
(struct scatterlist *)(cmd->prot_sdb + 1);
}
if (blk_bidi_rq(req)) {
struct request *next_rq = req->next_rq;
struct scsi_data_buffer *bidi_sdb = blk_mq_rq_to_pdu(next_rq);
memset(bidi_sdb, 0, sizeof(struct scsi_data_buffer));
bidi_sdb->table.sgl =
(struct scatterlist *)(bidi_sdb + 1);
next_rq->special = bidi_sdb;
}
blk_mq_start_request(req);
return scsi_setup_cmnd(sdev, req);
}
static void scsi_mq_done(struct scsi_cmnd *cmd)
{
trace_scsi_dispatch_cmd_done(cmd);
blk_mq_complete_request(cmd->request);
}
static void scsi_mq_put_budget(struct blk_mq_hw_ctx *hctx)
{
struct request_queue *q = hctx->queue;
struct scsi_device *sdev = q->queuedata;
atomic_dec(&sdev->device_busy);
put_device(&sdev->sdev_gendev);
}
static bool scsi_mq_get_budget(struct blk_mq_hw_ctx *hctx)
{
struct request_queue *q = hctx->queue;
struct scsi_device *sdev = q->queuedata;
if (!get_device(&sdev->sdev_gendev))
goto out;
if (!scsi_dev_queue_ready(q, sdev))
goto out_put_device;
return true;
out_put_device:
put_device(&sdev->sdev_gendev);
out:
if (atomic_read(&sdev->device_busy) == 0 && !scsi_device_blocked(sdev))
blk_mq_delay_run_hw_queue(hctx, SCSI_QUEUE_DELAY);
return false;
}
static blk_status_t scsi_queue_rq(struct blk_mq_hw_ctx *hctx,
const struct blk_mq_queue_data *bd)
{
struct request *req = bd->rq;
struct request_queue *q = req->q;
struct scsi_device *sdev = q->queuedata;
struct Scsi_Host *shost = sdev->host;
struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(req);
blk_status_t ret;
int reason;
ret = prep_to_mq(scsi_prep_state_check(sdev, req));
if (ret != BLK_STS_OK)
goto out_put_budget;
ret = BLK_STS_RESOURCE;
if (!scsi_target_queue_ready(shost, sdev))
goto out_put_budget;
if (!scsi_host_queue_ready(q, shost, sdev))
goto out_dec_target_busy;
if (!(req->rq_flags & RQF_DONTPREP)) {
ret = prep_to_mq(scsi_mq_prep_fn(req));
if (ret != BLK_STS_OK)
goto out_dec_host_busy;
req->rq_flags |= RQF_DONTPREP;
} else {
blk_mq_start_request(req);
}
if (sdev->simple_tags)
cmd->flags |= SCMD_TAGGED;
else
cmd->flags &= ~SCMD_TAGGED;
scsi_init_cmd_errh(cmd);
cmd->scsi_done = scsi_mq_done;
reason = scsi_dispatch_cmd(cmd);
if (reason) {
scsi_set_blocked(cmd, reason);
ret = BLK_STS_RESOURCE;
goto out_dec_host_busy;
}
return BLK_STS_OK;
out_dec_host_busy:
scsi_dec_host_busy(shost);
out_dec_target_busy:
if (scsi_target(sdev)->can_queue > 0)
atomic_dec(&scsi_target(sdev)->target_busy);
out_put_budget:
scsi_mq_put_budget(hctx);
switch (ret) {
case BLK_STS_OK:
break;
case BLK_STS_RESOURCE:
if (atomic_read(&sdev->device_busy) ||
scsi_device_blocked(sdev))
ret = BLK_STS_DEV_RESOURCE;
break;
default:
/*
* Make sure to release all allocated ressources when
* we hit an error, as we will never see this command
* again.
*/
if (req->rq_flags & RQF_DONTPREP)
scsi_mq_uninit_cmd(cmd);
break;
}
return ret;
}
static enum blk_eh_timer_return scsi_timeout(struct request *req,
bool reserved)
{
if (reserved)
return BLK_EH_RESET_TIMER;
return scsi_times_out(req);
}
static int scsi_mq_init_request(struct blk_mq_tag_set *set, struct request *rq,
unsigned int hctx_idx, unsigned int numa_node)
{
struct Scsi_Host *shost = set->driver_data;
const bool unchecked_isa_dma = shost->unchecked_isa_dma;
struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(rq);
struct scatterlist *sg;
if (unchecked_isa_dma)
cmd->flags |= SCMD_UNCHECKED_ISA_DMA;
cmd->sense_buffer = scsi_alloc_sense_buffer(unchecked_isa_dma,
GFP_KERNEL, numa_node);
if (!cmd->sense_buffer)
return -ENOMEM;
cmd->req.sense = cmd->sense_buffer;
if (scsi_host_get_prot(shost)) {
sg = (void *)cmd + sizeof(struct scsi_cmnd) +
shost->hostt->cmd_size;
cmd->prot_sdb = (void *)sg + scsi_mq_sgl_size(shost);
}
return 0;
}
static void scsi_mq_exit_request(struct blk_mq_tag_set *set, struct request *rq,
unsigned int hctx_idx)
{
struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(rq);
scsi_free_sense_buffer(cmd->flags & SCMD_UNCHECKED_ISA_DMA,
cmd->sense_buffer);
}
static int scsi_map_queues(struct blk_mq_tag_set *set)
{
struct Scsi_Host *shost = container_of(set, struct Scsi_Host, tag_set);
if (shost->hostt->map_queues)
return shost->hostt->map_queues(shost);
return blk_mq_map_queues(set);
}
void __scsi_init_queue(struct Scsi_Host *shost, struct request_queue *q)
{
struct device *dev = shost->dma_dev;
/*
* this limit is imposed by hardware restrictions
*/
blk_queue_max_segments(q, min_t(unsigned short, shost->sg_tablesize,
SG_MAX_SEGMENTS));
if (scsi_host_prot_dma(shost)) {
shost->sg_prot_tablesize =
min_not_zero(shost->sg_prot_tablesize,
(unsigned short)SCSI_MAX_PROT_SG_SEGMENTS);
BUG_ON(shost->sg_prot_tablesize < shost->sg_tablesize);
blk_queue_max_integrity_segments(q, shost->sg_prot_tablesize);
}
blk_queue_max_hw_sectors(q, shost->max_sectors);
if (shost->unchecked_isa_dma)
blk_queue_bounce_limit(q, BLK_BOUNCE_ISA);
blk_queue_segment_boundary(q, shost->dma_boundary);
dma_set_seg_boundary(dev, shost->dma_boundary);
blk_queue_max_segment_size(q, dma_get_max_seg_size(dev));
if (!shost->use_clustering)
q->limits.cluster = 0;
/*
* Set a reasonable default alignment: The larger of 32-byte (dword),
* which is a common minimum for HBAs, and the minimum DMA alignment,
* which is set by the platform.
*
* Devices that require a bigger alignment can increase it later.
*/
blk_queue_dma_alignment(q, max(4, dma_get_cache_alignment()) - 1);
}
EXPORT_SYMBOL_GPL(__scsi_init_queue);
static int scsi_old_init_rq(struct request_queue *q, struct request *rq,
gfp_t gfp)
{
struct Scsi_Host *shost = q->rq_alloc_data;
const bool unchecked_isa_dma = shost->unchecked_isa_dma;
struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(rq);
memset(cmd, 0, sizeof(*cmd));
if (unchecked_isa_dma)
cmd->flags |= SCMD_UNCHECKED_ISA_DMA;
cmd->sense_buffer = scsi_alloc_sense_buffer(unchecked_isa_dma, gfp,
NUMA_NO_NODE);
if (!cmd->sense_buffer)
goto fail;
cmd->req.sense = cmd->sense_buffer;
if (scsi_host_get_prot(shost) >= SHOST_DIX_TYPE0_PROTECTION) {
cmd->prot_sdb = kmem_cache_zalloc(scsi_sdb_cache, gfp);
if (!cmd->prot_sdb)
goto fail_free_sense;
}
return 0;
fail_free_sense:
scsi_free_sense_buffer(unchecked_isa_dma, cmd->sense_buffer);
fail:
return -ENOMEM;
}
static void scsi_old_exit_rq(struct request_queue *q, struct request *rq)
{
struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(rq);
if (cmd->prot_sdb)
kmem_cache_free(scsi_sdb_cache, cmd->prot_sdb);
scsi_free_sense_buffer(cmd->flags & SCMD_UNCHECKED_ISA_DMA,
cmd->sense_buffer);
}
struct request_queue *scsi_old_alloc_queue(struct scsi_device *sdev)
{
struct Scsi_Host *shost = sdev->host;
struct request_queue *q;
q = blk_alloc_queue_node(GFP_KERNEL, NUMA_NO_NODE, NULL);
if (!q)
return NULL;
q->cmd_size = sizeof(struct scsi_cmnd) + shost->hostt->cmd_size;
q->rq_alloc_data = shost;
q->request_fn = scsi_request_fn;
q->init_rq_fn = scsi_old_init_rq;
q->exit_rq_fn = scsi_old_exit_rq;
q->initialize_rq_fn = scsi_initialize_rq;
if (blk_init_allocated_queue(q) < 0) {
blk_cleanup_queue(q);
return NULL;
}
__scsi_init_queue(shost, q);
blk_queue_flag_set(QUEUE_FLAG_SCSI_PASSTHROUGH, q);
blk_queue_prep_rq(q, scsi_prep_fn);
blk_queue_unprep_rq(q, scsi_unprep_fn);
blk_queue_softirq_done(q, scsi_softirq_done);
blk_queue_rq_timed_out(q, scsi_times_out);
blk_queue_lld_busy(q, scsi_lld_busy);
return q;
}
static const struct blk_mq_ops scsi_mq_ops = {
.get_budget = scsi_mq_get_budget,
.put_budget = scsi_mq_put_budget,
.queue_rq = scsi_queue_rq,
.complete = scsi_softirq_done,
.timeout = scsi_timeout,
#ifdef CONFIG_BLK_DEBUG_FS
.show_rq = scsi_show_rq,
#endif
.init_request = scsi_mq_init_request,
.exit_request = scsi_mq_exit_request,
.initialize_rq_fn = scsi_initialize_rq,
.map_queues = scsi_map_queues,
};
struct request_queue *scsi_mq_alloc_queue(struct scsi_device *sdev)
{
sdev->request_queue = blk_mq_init_queue(&sdev->host->tag_set);
if (IS_ERR(sdev->request_queue))
return NULL;
sdev->request_queue->queuedata = sdev;
__scsi_init_queue(sdev->host, sdev->request_queue);
blk_queue_flag_set(QUEUE_FLAG_SCSI_PASSTHROUGH, sdev->request_queue);
return sdev->request_queue;
}
int scsi_mq_setup_tags(struct Scsi_Host *shost)
{
unsigned int cmd_size, sgl_size;
sgl_size = scsi_mq_sgl_size(shost);
cmd_size = sizeof(struct scsi_cmnd) + shost->hostt->cmd_size + sgl_size;
if (scsi_host_get_prot(shost))
cmd_size += sizeof(struct scsi_data_buffer) + sgl_size;
memset(&shost->tag_set, 0, sizeof(shost->tag_set));
shost->tag_set.ops = &scsi_mq_ops;
shost->tag_set.nr_hw_queues = shost->nr_hw_queues ? : 1;
shost->tag_set.queue_depth = shost->can_queue;
shost->tag_set.cmd_size = cmd_size;
shost->tag_set.numa_node = NUMA_NO_NODE;
shost->tag_set.flags = BLK_MQ_F_SHOULD_MERGE | BLK_MQ_F_SG_MERGE;
shost->tag_set.flags |=
BLK_ALLOC_POLICY_TO_MQ_FLAG(shost->hostt->tag_alloc_policy);
shost->tag_set.driver_data = shost;
return blk_mq_alloc_tag_set(&shost->tag_set);
}
void scsi_mq_destroy_tags(struct Scsi_Host *shost)
{
blk_mq_free_tag_set(&shost->tag_set);
}
/**
* scsi_device_from_queue - return sdev associated with a request_queue
* @q: The request queue to return the sdev from
*
* Return the sdev associated with a request queue or NULL if the
* request_queue does not reference a SCSI device.
*/
struct scsi_device *scsi_device_from_queue(struct request_queue *q)
{
struct scsi_device *sdev = NULL;
if (q->mq_ops) {
if (q->mq_ops == &scsi_mq_ops)
sdev = q->queuedata;
} else if (q->request_fn == scsi_request_fn)
sdev = q->queuedata;
if (!sdev || !get_device(&sdev->sdev_gendev))
sdev = NULL;
return sdev;
}
EXPORT_SYMBOL_GPL(scsi_device_from_queue);
/*
* Function: scsi_block_requests()
*
* Purpose: Utility function used by low-level drivers to prevent further
* commands from being queued to the device.
*
* Arguments: shost - Host in question
*
* Returns: Nothing
*
* Lock status: No locks are assumed held.
*
* Notes: There is no timer nor any other means by which the requests
* get unblocked other than the low-level driver calling
* scsi_unblock_requests().
*/
void scsi_block_requests(struct Scsi_Host *shost)
{
shost->host_self_blocked = 1;
}
EXPORT_SYMBOL(scsi_block_requests);
/*
* Function: scsi_unblock_requests()
*
* Purpose: Utility function used by low-level drivers to allow further
* commands from being queued to the device.
*
* Arguments: shost - Host in question
*
* Returns: Nothing
*
* Lock status: No locks are assumed held.
*
* Notes: There is no timer nor any other means by which the requests
* get unblocked other than the low-level driver calling
* scsi_unblock_requests().
*
* This is done as an API function so that changes to the
* internals of the scsi mid-layer won't require wholesale
* changes to drivers that use this feature.
*/
void scsi_unblock_requests(struct Scsi_Host *shost)
{
shost->host_self_blocked = 0;
scsi_run_host_queues(shost);
}
EXPORT_SYMBOL(scsi_unblock_requests);
int __init scsi_init_queue(void)
{
scsi_sdb_cache = kmem_cache_create("scsi_data_buffer",
sizeof(struct scsi_data_buffer),
0, 0, NULL);
if (!scsi_sdb_cache) {
printk(KERN_ERR "SCSI: can't init scsi sdb cache\n");
return -ENOMEM;
}
return 0;
}
void scsi_exit_queue(void)
{
kmem_cache_destroy(scsi_sense_cache);
kmem_cache_destroy(scsi_sense_isadma_cache);
kmem_cache_destroy(scsi_sdb_cache);
}
/**
* scsi_mode_select - issue a mode select
* @sdev: SCSI device to be queried
* @pf: Page format bit (1 == standard, 0 == vendor specific)
* @sp: Save page bit (0 == don't save, 1 == save)
* @modepage: mode page being requested
* @buffer: request buffer (may not be smaller than eight bytes)
* @len: length of request buffer.
* @timeout: command timeout
* @retries: number of retries before failing
* @data: returns a structure abstracting the mode header data
* @sshdr: place to put sense data (or NULL if no sense to be collected).
* must be SCSI_SENSE_BUFFERSIZE big.
*
* Returns zero if successful; negative error number or scsi
* status on error
*
*/
int
scsi_mode_select(struct scsi_device *sdev, int pf, int sp, int modepage,
unsigned char *buffer, int len, int timeout, int retries,
struct scsi_mode_data *data, struct scsi_sense_hdr *sshdr)
{
unsigned char cmd[10];
unsigned char *real_buffer;
int ret;
memset(cmd, 0, sizeof(cmd));
cmd[1] = (pf ? 0x10 : 0) | (sp ? 0x01 : 0);
if (sdev->use_10_for_ms) {
if (len > 65535)
return -EINVAL;
real_buffer = kmalloc(8 + len, GFP_KERNEL);
if (!real_buffer)
return -ENOMEM;
memcpy(real_buffer + 8, buffer, len);
len += 8;
real_buffer[0] = 0;
real_buffer[1] = 0;
real_buffer[2] = data->medium_type;
real_buffer[3] = data->device_specific;
real_buffer[4] = data->longlba ? 0x01 : 0;
real_buffer[5] = 0;
real_buffer[6] = data->block_descriptor_length >> 8;
real_buffer[7] = data->block_descriptor_length;
cmd[0] = MODE_SELECT_10;
cmd[7] = len >> 8;
cmd[8] = len;
} else {
if (len > 255 || data->block_descriptor_length > 255 ||
data->longlba)
return -EINVAL;
real_buffer = kmalloc(4 + len, GFP_KERNEL);
if (!real_buffer)
return -ENOMEM;
memcpy(real_buffer + 4, buffer, len);
len += 4;
real_buffer[0] = 0;
real_buffer[1] = data->medium_type;
real_buffer[2] = data->device_specific;
real_buffer[3] = data->block_descriptor_length;
cmd[0] = MODE_SELECT;
cmd[4] = len;
}
ret = scsi_execute_req(sdev, cmd, DMA_TO_DEVICE, real_buffer, len,
sshdr, timeout, retries, NULL);
kfree(real_buffer);
return ret;
}
EXPORT_SYMBOL_GPL(scsi_mode_select);
/**
* scsi_mode_sense - issue a mode sense, falling back from 10 to six bytes if necessary.
* @sdev: SCSI device to be queried
* @dbd: set if mode sense will allow block descriptors to be returned
* @modepage: mode page being requested
* @buffer: request buffer (may not be smaller than eight bytes)
* @len: length of request buffer.
* @timeout: command timeout
* @retries: number of retries before failing
* @data: returns a structure abstracting the mode header data
* @sshdr: place to put sense data (or NULL if no sense to be collected).
* must be SCSI_SENSE_BUFFERSIZE big.
*
* Returns zero if unsuccessful, or the header offset (either 4
* or 8 depending on whether a six or ten byte command was
* issued) if successful.
*/
int
scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage,
unsigned char *buffer, int len, int timeout, int retries,
struct scsi_mode_data *data, struct scsi_sense_hdr *sshdr)
{
unsigned char cmd[12];
int use_10_for_ms;
int header_length;
int result, retry_count = retries;
struct scsi_sense_hdr my_sshdr;
memset(data, 0, sizeof(*data));
memset(&cmd[0], 0, 12);
cmd[1] = dbd & 0x18; /* allows DBD and LLBA bits */
cmd[2] = modepage;
/* caller might not be interested in sense, but we need it */
if (!sshdr)
sshdr = &my_sshdr;
retry:
use_10_for_ms = sdev->use_10_for_ms;
if (use_10_for_ms) {
if (len < 8)
len = 8;
cmd[0] = MODE_SENSE_10;
cmd[8] = len;
header_length = 8;
} else {
if (len < 4)
len = 4;
cmd[0] = MODE_SENSE;
cmd[4] = len;
header_length = 4;
}
memset(buffer, 0, len);
result = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buffer, len,
sshdr, timeout, retries, NULL);
/* This code looks awful: what it's doing is making sure an
* ILLEGAL REQUEST sense return identifies the actual command
* byte as the problem. MODE_SENSE commands can return
* ILLEGAL REQUEST if the code page isn't supported */
if (use_10_for_ms && !scsi_status_is_good(result) &&
driver_byte(result) == DRIVER_SENSE) {
if (scsi_sense_valid(sshdr)) {
if ((sshdr->sense_key == ILLEGAL_REQUEST) &&
(sshdr->asc == 0x20) && (sshdr->ascq == 0)) {
/*
* Invalid command operation code
*/
sdev->use_10_for_ms = 0;
goto retry;
}
}
}
if(scsi_status_is_good(result)) {
if (unlikely(buffer[0] == 0x86 && buffer[1] == 0x0b &&
(modepage == 6 || modepage == 8))) {
/* Initio breakage? */
header_length = 0;
data->length = 13;
data->medium_type = 0;
data->device_specific = 0;
data->longlba = 0;
data->block_descriptor_length = 0;
} else if(use_10_for_ms) {
data->length = buffer[0]*256 + buffer[1] + 2;
data->medium_type = buffer[2];
data->device_specific = buffer[3];
data->longlba = buffer[4] & 0x01;
data->block_descriptor_length = buffer[6]*256
+ buffer[7];
} else {
data->length = buffer[0] + 1;
data->medium_type = buffer[1];
data->device_specific = buffer[2];
data->block_descriptor_length = buffer[3];
}
data->header_length = header_length;
} else if ((status_byte(result) == CHECK_CONDITION) &&
scsi_sense_valid(sshdr) &&
sshdr->sense_key == UNIT_ATTENTION && retry_count) {
retry_count--;
goto retry;
}
return result;
}
EXPORT_SYMBOL(scsi_mode_sense);
/**
* scsi_test_unit_ready - test if unit is ready
* @sdev: scsi device to change the state of.
* @timeout: command timeout
* @retries: number of retries before failing
* @sshdr: outpout pointer for decoded sense information.
*
* Returns zero if unsuccessful or an error if TUR failed. For
* removable media, UNIT_ATTENTION sets ->changed flag.
**/
int
scsi_test_unit_ready(struct scsi_device *sdev, int timeout, int retries,
struct scsi_sense_hdr *sshdr)
{
char cmd[] = {
TEST_UNIT_READY, 0, 0, 0, 0, 0,
};
int result;
/* try to eat the UNIT_ATTENTION if there are enough retries */
do {
result = scsi_execute_req(sdev, cmd, DMA_NONE, NULL, 0, sshdr,
timeout, 1, NULL);
if (sdev->removable && scsi_sense_valid(sshdr) &&
sshdr->sense_key == UNIT_ATTENTION)
sdev->changed = 1;
} while (scsi_sense_valid(sshdr) &&
sshdr->sense_key == UNIT_ATTENTION && --retries);
return result;
}
EXPORT_SYMBOL(scsi_test_unit_ready);
/**
* scsi_device_set_state - Take the given device through the device state model.
* @sdev: scsi device to change the state of.
* @state: state to change to.
*
* Returns zero if successful or an error if the requested
* transition is illegal.
*/
int
scsi_device_set_state(struct scsi_device *sdev, enum scsi_device_state state)
{
enum scsi_device_state oldstate = sdev->sdev_state;
if (state == oldstate)
return 0;
switch (state) {
case SDEV_CREATED:
switch (oldstate) {
case SDEV_CREATED_BLOCK:
break;
default:
goto illegal;
}
break;
case SDEV_RUNNING:
switch (oldstate) {
case SDEV_CREATED:
case SDEV_OFFLINE:
case SDEV_TRANSPORT_OFFLINE:
case SDEV_QUIESCE:
case SDEV_BLOCK:
break;
default:
goto illegal;
}
break;
case SDEV_QUIESCE:
switch (oldstate) {
case SDEV_RUNNING:
case SDEV_OFFLINE:
case SDEV_TRANSPORT_OFFLINE:
break;
default:
goto illegal;
}
break;
case SDEV_OFFLINE:
case SDEV_TRANSPORT_OFFLINE:
switch (oldstate) {
case SDEV_CREATED:
case SDEV_RUNNING:
case SDEV_QUIESCE:
case SDEV_BLOCK:
break;
default:
goto illegal;
}
break;
case SDEV_BLOCK:
switch (oldstate) {
case SDEV_RUNNING:
case SDEV_CREATED_BLOCK:
case SDEV_OFFLINE:
break;
default:
goto illegal;
}
break;
case SDEV_CREATED_BLOCK:
switch (oldstate) {
case SDEV_CREATED:
break;
default:
goto illegal;
}
break;
case SDEV_CANCEL:
switch (oldstate) {
case SDEV_CREATED:
case SDEV_RUNNING:
case SDEV_QUIESCE:
case SDEV_OFFLINE:
case SDEV_TRANSPORT_OFFLINE:
break;
default:
goto illegal;
}
break;
case SDEV_DEL:
switch (oldstate) {
case SDEV_CREATED:
case SDEV_RUNNING:
case SDEV_OFFLINE:
case SDEV_TRANSPORT_OFFLINE:
case SDEV_CANCEL:
case SDEV_BLOCK:
case SDEV_CREATED_BLOCK:
break;
default:
goto illegal;
}
break;
}
sdev->sdev_state = state;
return 0;
illegal:
SCSI_LOG_ERROR_RECOVERY(1,
sdev_printk(KERN_ERR, sdev,
"Illegal state transition %s->%s",
scsi_device_state_name(oldstate),
scsi_device_state_name(state))
);
return -EINVAL;
}
EXPORT_SYMBOL(scsi_device_set_state);
/**
* sdev_evt_emit - emit a single SCSI device uevent
* @sdev: associated SCSI device
* @evt: event to emit
*
* Send a single uevent (scsi_event) to the associated scsi_device.
*/
static void scsi_evt_emit(struct scsi_device *sdev, struct scsi_event *evt)
{
int idx = 0;
char *envp[3];
switch (evt->evt_type) {
case SDEV_EVT_MEDIA_CHANGE:
envp[idx++] = "SDEV_MEDIA_CHANGE=1";
break;
case SDEV_EVT_INQUIRY_CHANGE_REPORTED:
scsi_rescan_device(&sdev->sdev_gendev);
envp[idx++] = "SDEV_UA=INQUIRY_DATA_HAS_CHANGED";
break;
case SDEV_EVT_CAPACITY_CHANGE_REPORTED:
envp[idx++] = "SDEV_UA=CAPACITY_DATA_HAS_CHANGED";
break;
case SDEV_EVT_SOFT_THRESHOLD_REACHED_REPORTED:
envp[idx++] = "SDEV_UA=THIN_PROVISIONING_SOFT_THRESHOLD_REACHED";
break;
case SDEV_EVT_MODE_PARAMETER_CHANGE_REPORTED:
envp[idx++] = "SDEV_UA=MODE_PARAMETERS_CHANGED";
break;
case SDEV_EVT_LUN_CHANGE_REPORTED:
envp[idx++] = "SDEV_UA=REPORTED_LUNS_DATA_HAS_CHANGED";
break;
case SDEV_EVT_ALUA_STATE_CHANGE_REPORTED:
envp[idx++] = "SDEV_UA=ASYMMETRIC_ACCESS_STATE_CHANGED";
break;
case SDEV_EVT_POWER_ON_RESET_OCCURRED:
envp[idx++] = "SDEV_UA=POWER_ON_RESET_OCCURRED";
break;
default:
/* do nothing */
break;
}
envp[idx++] = NULL;
kobject_uevent_env(&sdev->sdev_gendev.kobj, KOBJ_CHANGE, envp);
}
/**
* sdev_evt_thread - send a uevent for each scsi event
* @work: wo