| /* |
| * Copyright (C) 2015 Broadcom Corporation |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation version 2. |
| * |
| * This program is distributed "as is" WITHOUT ANY WARRANTY of any |
| * kind, whether express or implied; without even the implied warranty |
| * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/err.h> |
| #include <linux/clk-provider.h> |
| #include <linux/io.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| |
| #include <dt-bindings/clock/bcm-ns2.h> |
| #include "clk-iproc.h" |
| |
| #define REG_VAL(o, s, w) { .offset = o, .shift = s, .width = w, } |
| |
| #define AON_VAL(o, pw, ps, is) { .offset = o, .pwr_width = pw, \ |
| .pwr_shift = ps, .iso_shift = is } |
| |
| #define RESET_VAL(o, rs, prs) { .offset = o, .reset_shift = rs, \ |
| .p_reset_shift = prs } |
| |
| #define DF_VAL(o, kis, kiw, kps, kpw, kas, kaw) { .offset = o, .ki_shift = kis,\ |
| .ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas, \ |
| .ka_width = kaw } |
| |
| #define VCO_CTRL_VAL(uo, lo) { .u_offset = uo, .l_offset = lo } |
| |
| #define ENABLE_VAL(o, es, hs, bs) { .offset = o, .enable_shift = es, \ |
| .hold_shift = hs, .bypass_shift = bs } |
| |
| static const struct iproc_pll_ctrl genpll_scr = { |
| .flags = IPROC_CLK_AON | IPROC_CLK_PLL_SPLIT_STAT_CTRL, |
| .aon = AON_VAL(0x0, 1, 15, 12), |
| .reset = RESET_VAL(0x4, 2, 1), |
| .dig_filter = DF_VAL(0x0, 9, 3, 5, 4, 2, 3), |
| .ndiv_int = REG_VAL(0x8, 4, 10), |
| .pdiv = REG_VAL(0x8, 0, 4), |
| .vco_ctrl = VCO_CTRL_VAL(0x10, 0xc), |
| .status = REG_VAL(0x0, 27, 1), |
| }; |
| |
| |
| static const struct iproc_clk_ctrl genpll_scr_clk[] = { |
| /* bypass_shift, the last value passed into ENABLE_VAL(), is not defined |
| * in NS2. However, it doesn't appear to be used anywhere, so setting |
| * it to 0. |
| */ |
| [BCM_NS2_GENPLL_SCR_SCR_CLK] = { |
| .channel = BCM_NS2_GENPLL_SCR_SCR_CLK, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x0, 18, 12, 0), |
| .mdiv = REG_VAL(0x18, 0, 8), |
| }, |
| [BCM_NS2_GENPLL_SCR_FS_CLK] = { |
| .channel = BCM_NS2_GENPLL_SCR_FS_CLK, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x0, 19, 13, 0), |
| .mdiv = REG_VAL(0x18, 8, 8), |
| }, |
| [BCM_NS2_GENPLL_SCR_AUDIO_CLK] = { |
| .channel = BCM_NS2_GENPLL_SCR_AUDIO_CLK, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x0, 20, 14, 0), |
| .mdiv = REG_VAL(0x14, 0, 8), |
| }, |
| [BCM_NS2_GENPLL_SCR_CH3_UNUSED] = { |
| .channel = BCM_NS2_GENPLL_SCR_CH3_UNUSED, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x0, 21, 15, 0), |
| .mdiv = REG_VAL(0x14, 8, 8), |
| }, |
| [BCM_NS2_GENPLL_SCR_CH4_UNUSED] = { |
| .channel = BCM_NS2_GENPLL_SCR_CH4_UNUSED, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x0, 22, 16, 0), |
| .mdiv = REG_VAL(0x14, 16, 8), |
| }, |
| [BCM_NS2_GENPLL_SCR_CH5_UNUSED] = { |
| .channel = BCM_NS2_GENPLL_SCR_CH5_UNUSED, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x0, 23, 17, 0), |
| .mdiv = REG_VAL(0x14, 24, 8), |
| }, |
| }; |
| |
| static void __init ns2_genpll_scr_clk_init(struct device_node *node) |
| { |
| iproc_pll_clk_setup(node, &genpll_scr, NULL, 0, genpll_scr_clk, |
| ARRAY_SIZE(genpll_scr_clk)); |
| } |
| CLK_OF_DECLARE(ns2_genpll_src_clk, "brcm,ns2-genpll-scr", |
| ns2_genpll_scr_clk_init); |
| |
| static const struct iproc_pll_ctrl genpll_sw = { |
| .flags = IPROC_CLK_AON | IPROC_CLK_PLL_SPLIT_STAT_CTRL, |
| .aon = AON_VAL(0x0, 1, 11, 10), |
| .reset = RESET_VAL(0x4, 2, 1), |
| .dig_filter = DF_VAL(0x0, 9, 3, 5, 4, 2, 3), |
| .ndiv_int = REG_VAL(0x8, 4, 10), |
| .pdiv = REG_VAL(0x8, 0, 4), |
| .vco_ctrl = VCO_CTRL_VAL(0x10, 0xc), |
| .status = REG_VAL(0x0, 13, 1), |
| }; |
| |
| static const struct iproc_clk_ctrl genpll_sw_clk[] = { |
| /* bypass_shift, the last value passed into ENABLE_VAL(), is not defined |
| * in NS2. However, it doesn't appear to be used anywhere, so setting |
| * it to 0. |
| */ |
| [BCM_NS2_GENPLL_SW_RPE_CLK] = { |
| .channel = BCM_NS2_GENPLL_SW_RPE_CLK, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x0, 18, 12, 0), |
| .mdiv = REG_VAL(0x18, 0, 8), |
| }, |
| [BCM_NS2_GENPLL_SW_250_CLK] = { |
| .channel = BCM_NS2_GENPLL_SW_250_CLK, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x0, 19, 13, 0), |
| .mdiv = REG_VAL(0x18, 8, 8), |
| }, |
| [BCM_NS2_GENPLL_SW_NIC_CLK] = { |
| .channel = BCM_NS2_GENPLL_SW_NIC_CLK, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x0, 20, 14, 0), |
| .mdiv = REG_VAL(0x14, 0, 8), |
| }, |
| [BCM_NS2_GENPLL_SW_CHIMP_CLK] = { |
| .channel = BCM_NS2_GENPLL_SW_CHIMP_CLK, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x0, 21, 15, 0), |
| .mdiv = REG_VAL(0x14, 8, 8), |
| }, |
| [BCM_NS2_GENPLL_SW_PORT_CLK] = { |
| .channel = BCM_NS2_GENPLL_SW_PORT_CLK, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x0, 22, 16, 0), |
| .mdiv = REG_VAL(0x14, 16, 8), |
| }, |
| [BCM_NS2_GENPLL_SW_SDIO_CLK] = { |
| .channel = BCM_NS2_GENPLL_SW_SDIO_CLK, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x0, 23, 17, 0), |
| .mdiv = REG_VAL(0x14, 24, 8), |
| }, |
| }; |
| |
| static void __init ns2_genpll_sw_clk_init(struct device_node *node) |
| { |
| iproc_pll_clk_setup(node, &genpll_sw, NULL, 0, genpll_sw_clk, |
| ARRAY_SIZE(genpll_sw_clk)); |
| } |
| CLK_OF_DECLARE(ns2_genpll_sw_clk, "brcm,ns2-genpll-sw", |
| ns2_genpll_sw_clk_init); |
| |
| static const struct iproc_pll_ctrl lcpll_ddr = { |
| .flags = IPROC_CLK_AON | IPROC_CLK_PLL_SPLIT_STAT_CTRL, |
| .aon = AON_VAL(0x0, 2, 1, 0), |
| .reset = RESET_VAL(0x4, 2, 1), |
| .dig_filter = DF_VAL(0x0, 9, 3, 5, 4, 1, 4), |
| .ndiv_int = REG_VAL(0x8, 4, 10), |
| .pdiv = REG_VAL(0x8, 0, 4), |
| .vco_ctrl = VCO_CTRL_VAL(0x10, 0xc), |
| .status = REG_VAL(0x0, 0, 1), |
| }; |
| |
| static const struct iproc_clk_ctrl lcpll_ddr_clk[] = { |
| /* bypass_shift, the last value passed into ENABLE_VAL(), is not defined |
| * in NS2. However, it doesn't appear to be used anywhere, so setting |
| * it to 0. |
| */ |
| [BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK] = { |
| .channel = BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x0, 18, 12, 0), |
| .mdiv = REG_VAL(0x14, 0, 8), |
| }, |
| [BCM_NS2_LCPLL_DDR_DDR_CLK] = { |
| .channel = BCM_NS2_LCPLL_DDR_DDR_CLK, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x0, 19, 13, 0), |
| .mdiv = REG_VAL(0x14, 8, 8), |
| }, |
| [BCM_NS2_LCPLL_DDR_CH2_UNUSED] = { |
| .channel = BCM_NS2_LCPLL_DDR_CH2_UNUSED, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x0, 20, 14, 0), |
| .mdiv = REG_VAL(0x10, 0, 8), |
| }, |
| [BCM_NS2_LCPLL_DDR_CH3_UNUSED] = { |
| .channel = BCM_NS2_LCPLL_DDR_CH3_UNUSED, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x0, 21, 15, 0), |
| .mdiv = REG_VAL(0x10, 8, 8), |
| }, |
| [BCM_NS2_LCPLL_DDR_CH4_UNUSED] = { |
| .channel = BCM_NS2_LCPLL_DDR_CH4_UNUSED, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x0, 22, 16, 0), |
| .mdiv = REG_VAL(0x10, 16, 8), |
| }, |
| [BCM_NS2_LCPLL_DDR_CH5_UNUSED] = { |
| .channel = BCM_NS2_LCPLL_DDR_CH5_UNUSED, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x0, 23, 17, 0), |
| .mdiv = REG_VAL(0x10, 24, 8), |
| }, |
| }; |
| |
| static void __init ns2_lcpll_ddr_clk_init(struct device_node *node) |
| { |
| iproc_pll_clk_setup(node, &lcpll_ddr, NULL, 0, lcpll_ddr_clk, |
| ARRAY_SIZE(lcpll_ddr_clk)); |
| } |
| CLK_OF_DECLARE(ns2_lcpll_ddr_clk, "brcm,ns2-lcpll-ddr", |
| ns2_lcpll_ddr_clk_init); |
| |
| static const struct iproc_pll_ctrl lcpll_ports = { |
| .flags = IPROC_CLK_AON | IPROC_CLK_PLL_SPLIT_STAT_CTRL, |
| .aon = AON_VAL(0x0, 2, 5, 4), |
| .reset = RESET_VAL(0x4, 2, 1), |
| .dig_filter = DF_VAL(0x0, 9, 3, 5, 4, 1, 4), |
| .ndiv_int = REG_VAL(0x8, 4, 10), |
| .pdiv = REG_VAL(0x8, 0, 4), |
| .vco_ctrl = VCO_CTRL_VAL(0x10, 0xc), |
| .status = REG_VAL(0x0, 0, 1), |
| }; |
| |
| static const struct iproc_clk_ctrl lcpll_ports_clk[] = { |
| /* bypass_shift, the last value passed into ENABLE_VAL(), is not defined |
| * in NS2. However, it doesn't appear to be used anywhere, so setting |
| * it to 0. |
| */ |
| [BCM_NS2_LCPLL_PORTS_WAN_CLK] = { |
| .channel = BCM_NS2_LCPLL_PORTS_WAN_CLK, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x0, 18, 12, 0), |
| .mdiv = REG_VAL(0x14, 0, 8), |
| }, |
| [BCM_NS2_LCPLL_PORTS_RGMII_CLK] = { |
| .channel = BCM_NS2_LCPLL_PORTS_RGMII_CLK, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x0, 19, 13, 0), |
| .mdiv = REG_VAL(0x14, 8, 8), |
| }, |
| [BCM_NS2_LCPLL_PORTS_CH2_UNUSED] = { |
| .channel = BCM_NS2_LCPLL_PORTS_CH2_UNUSED, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x0, 20, 14, 0), |
| .mdiv = REG_VAL(0x10, 0, 8), |
| }, |
| [BCM_NS2_LCPLL_PORTS_CH3_UNUSED] = { |
| .channel = BCM_NS2_LCPLL_PORTS_CH3_UNUSED, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x0, 21, 15, 0), |
| .mdiv = REG_VAL(0x10, 8, 8), |
| }, |
| [BCM_NS2_LCPLL_PORTS_CH4_UNUSED] = { |
| .channel = BCM_NS2_LCPLL_PORTS_CH4_UNUSED, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x0, 22, 16, 0), |
| .mdiv = REG_VAL(0x10, 16, 8), |
| }, |
| [BCM_NS2_LCPLL_PORTS_CH5_UNUSED] = { |
| .channel = BCM_NS2_LCPLL_PORTS_CH5_UNUSED, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x0, 23, 17, 0), |
| .mdiv = REG_VAL(0x10, 24, 8), |
| }, |
| }; |
| |
| static void __init ns2_lcpll_ports_clk_init(struct device_node *node) |
| { |
| iproc_pll_clk_setup(node, &lcpll_ports, NULL, 0, lcpll_ports_clk, |
| ARRAY_SIZE(lcpll_ports_clk)); |
| } |
| CLK_OF_DECLARE(ns2_lcpll_ports_clk, "brcm,ns2-lcpll-ports", |
| ns2_lcpll_ports_clk_init); |
