| # SPDX-License-Identifier: GPL-2.0-only |
| # |
| # For a description of the syntax of this configuration file, |
| # see Documentation/kbuild/kconfig-language.rst. |
| # |
| |
| config 64BIT |
| bool |
| |
| config 32BIT |
| bool |
| |
| config RISCV |
| def_bool y |
| select ACPI_GENERIC_GSI if ACPI |
| select ACPI_REDUCED_HARDWARE_ONLY if ACPI |
| select ARCH_DMA_DEFAULT_COHERENT |
| select ARCH_ENABLE_HUGEPAGE_MIGRATION if HUGETLB_PAGE && MIGRATION |
| select ARCH_ENABLE_SPLIT_PMD_PTLOCK if PGTABLE_LEVELS > 2 |
| select ARCH_ENABLE_THP_MIGRATION if TRANSPARENT_HUGEPAGE |
| select ARCH_HAS_BINFMT_FLAT |
| select ARCH_HAS_CURRENT_STACK_POINTER |
| select ARCH_HAS_DEBUG_VIRTUAL if MMU |
| select ARCH_HAS_DEBUG_VM_PGTABLE |
| select ARCH_HAS_DEBUG_WX |
| select ARCH_HAS_FORTIFY_SOURCE |
| select ARCH_HAS_GCOV_PROFILE_ALL |
| select ARCH_HAS_GIGANTIC_PAGE |
| select ARCH_HAS_KCOV |
| select ARCH_HAS_MMIOWB |
| select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE |
| select ARCH_HAS_PMEM_API |
| select ARCH_HAS_PTE_SPECIAL |
| select ARCH_HAS_SET_DIRECT_MAP if MMU |
| select ARCH_HAS_SET_MEMORY if MMU |
| select ARCH_HAS_STRICT_KERNEL_RWX if MMU && !XIP_KERNEL |
| select ARCH_HAS_STRICT_MODULE_RWX if MMU && !XIP_KERNEL |
| select ARCH_HAS_SYSCALL_WRAPPER |
| select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST |
| select ARCH_HAS_UBSAN_SANITIZE_ALL |
| select ARCH_HAS_VDSO_DATA |
| select ARCH_OPTIONAL_KERNEL_RWX if ARCH_HAS_STRICT_KERNEL_RWX |
| select ARCH_OPTIONAL_KERNEL_RWX_DEFAULT |
| select ARCH_STACKWALK |
| select ARCH_SUPPORTS_ATOMIC_RMW |
| select ARCH_SUPPORTS_CFI_CLANG |
| select ARCH_SUPPORTS_DEBUG_PAGEALLOC if MMU |
| select ARCH_SUPPORTS_HUGETLBFS if MMU |
| select ARCH_SUPPORTS_PAGE_TABLE_CHECK if MMU |
| select ARCH_SUPPORTS_PER_VMA_LOCK if MMU |
| select ARCH_USE_MEMTEST |
| select ARCH_USE_QUEUED_RWLOCKS |
| select ARCH_USES_CFI_TRAPS if CFI_CLANG |
| select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT if MMU |
| select ARCH_WANT_FRAME_POINTERS |
| select ARCH_WANT_GENERAL_HUGETLB if !RISCV_ISA_SVNAPOT |
| select ARCH_WANT_HUGE_PMD_SHARE if 64BIT |
| select ARCH_WANT_LD_ORPHAN_WARN if !XIP_KERNEL |
| select ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP |
| select ARCH_WANTS_THP_SWAP if HAVE_ARCH_TRANSPARENT_HUGEPAGE |
| select BINFMT_FLAT_NO_DATA_START_OFFSET if !MMU |
| select BUILDTIME_TABLE_SORT if MMU |
| select CLINT_TIMER if !MMU |
| select CLONE_BACKWARDS |
| select COMMON_CLK |
| select CPU_PM if CPU_IDLE || HIBERNATION |
| select EDAC_SUPPORT |
| select FRAME_POINTER if PERF_EVENTS || (FUNCTION_TRACER && !DYNAMIC_FTRACE) |
| select GENERIC_ARCH_TOPOLOGY |
| select GENERIC_ATOMIC64 if !64BIT |
| select GENERIC_CLOCKEVENTS_BROADCAST if SMP |
| select GENERIC_EARLY_IOREMAP |
| select GENERIC_ENTRY |
| select GENERIC_GETTIMEOFDAY if HAVE_GENERIC_VDSO |
| select GENERIC_IDLE_POLL_SETUP |
| select GENERIC_IOREMAP if MMU |
| select GENERIC_IRQ_IPI if SMP |
| select GENERIC_IRQ_IPI_MUX if SMP |
| select GENERIC_IRQ_MULTI_HANDLER |
| select GENERIC_IRQ_SHOW |
| select GENERIC_IRQ_SHOW_LEVEL |
| select GENERIC_LIB_DEVMEM_IS_ALLOWED |
| select GENERIC_PCI_IOMAP |
| select GENERIC_PTDUMP if MMU |
| select GENERIC_SCHED_CLOCK |
| select GENERIC_SMP_IDLE_THREAD |
| select GENERIC_TIME_VSYSCALL if MMU && 64BIT |
| select GENERIC_VDSO_TIME_NS if HAVE_GENERIC_VDSO |
| select HARDIRQS_SW_RESEND |
| select HAS_IOPORT if MMU |
| select HAVE_ARCH_AUDITSYSCALL |
| select HAVE_ARCH_HUGE_VMALLOC if HAVE_ARCH_HUGE_VMAP |
| select HAVE_ARCH_HUGE_VMAP if MMU && 64BIT && !XIP_KERNEL |
| select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL |
| select HAVE_ARCH_JUMP_LABEL_RELATIVE if !XIP_KERNEL |
| select HAVE_ARCH_KASAN if MMU && 64BIT |
| select HAVE_ARCH_KASAN_VMALLOC if MMU && 64BIT |
| select HAVE_ARCH_KFENCE if MMU && 64BIT |
| select HAVE_ARCH_KGDB if !XIP_KERNEL |
| select HAVE_ARCH_KGDB_QXFER_PKT |
| select HAVE_ARCH_MMAP_RND_BITS if MMU |
| select HAVE_ARCH_MMAP_RND_COMPAT_BITS if COMPAT |
| select HAVE_ARCH_SECCOMP_FILTER |
| select HAVE_ARCH_THREAD_STRUCT_WHITELIST |
| select HAVE_ARCH_TRACEHOOK |
| select HAVE_ARCH_TRANSPARENT_HUGEPAGE if 64BIT && MMU |
| select HAVE_ARCH_USERFAULTFD_MINOR if 64BIT && USERFAULTFD |
| select HAVE_ARCH_VMAP_STACK if MMU && 64BIT |
| select HAVE_ASM_MODVERSIONS |
| select HAVE_CONTEXT_TRACKING_USER |
| select HAVE_DEBUG_KMEMLEAK |
| select HAVE_DMA_CONTIGUOUS if MMU |
| select HAVE_DYNAMIC_FTRACE if !XIP_KERNEL && MMU && (CLANG_SUPPORTS_DYNAMIC_FTRACE || GCC_SUPPORTS_DYNAMIC_FTRACE) |
| select HAVE_DYNAMIC_FTRACE_WITH_REGS if HAVE_DYNAMIC_FTRACE |
| select HAVE_FTRACE_MCOUNT_RECORD if !XIP_KERNEL |
| select HAVE_FUNCTION_GRAPH_TRACER |
| select HAVE_FUNCTION_GRAPH_RETVAL if HAVE_FUNCTION_GRAPH_TRACER |
| select HAVE_FUNCTION_TRACER if !XIP_KERNEL && !PREEMPTION |
| select HAVE_EBPF_JIT if MMU |
| select HAVE_FUNCTION_ARG_ACCESS_API |
| select HAVE_FUNCTION_ERROR_INJECTION |
| select HAVE_GCC_PLUGINS |
| select HAVE_GENERIC_VDSO if MMU && 64BIT |
| select HAVE_IRQ_TIME_ACCOUNTING |
| select HAVE_KPROBES if !XIP_KERNEL |
| select HAVE_KPROBES_ON_FTRACE if !XIP_KERNEL |
| select HAVE_KRETPROBES if !XIP_KERNEL |
| # https://github.com/ClangBuiltLinux/linux/issues/1881 |
| select HAVE_LD_DEAD_CODE_DATA_ELIMINATION if !LD_IS_LLD |
| select HAVE_MOVE_PMD |
| select HAVE_MOVE_PUD |
| select HAVE_PCI |
| select HAVE_PERF_EVENTS |
| select HAVE_PERF_REGS |
| select HAVE_PERF_USER_STACK_DUMP |
| select HAVE_POSIX_CPU_TIMERS_TASK_WORK |
| select HAVE_PREEMPT_DYNAMIC_KEY if !XIP_KERNEL |
| select HAVE_REGS_AND_STACK_ACCESS_API |
| select HAVE_RETHOOK if !XIP_KERNEL |
| select HAVE_RSEQ |
| select HAVE_STACKPROTECTOR |
| select HAVE_SYSCALL_TRACEPOINTS |
| select HOTPLUG_CORE_SYNC_DEAD if HOTPLUG_CPU |
| select IRQ_DOMAIN |
| select IRQ_FORCED_THREADING |
| select KASAN_VMALLOC if KASAN |
| select LOCK_MM_AND_FIND_VMA |
| select MODULES_USE_ELF_RELA if MODULES |
| select MODULE_SECTIONS if MODULES |
| select OF |
| select OF_EARLY_FLATTREE |
| select OF_IRQ |
| select PCI_DOMAINS_GENERIC if PCI |
| select PCI_MSI if PCI |
| select RISCV_ALTERNATIVE if !XIP_KERNEL |
| select RISCV_INTC |
| select RISCV_TIMER if RISCV_SBI |
| select SIFIVE_PLIC |
| select SPARSE_IRQ |
| select SYSCTL_EXCEPTION_TRACE |
| select THREAD_INFO_IN_TASK |
| select TRACE_IRQFLAGS_SUPPORT |
| select UACCESS_MEMCPY if !MMU |
| select ZONE_DMA32 if 64BIT |
| |
| config CLANG_SUPPORTS_DYNAMIC_FTRACE |
| def_bool CC_IS_CLANG |
| # https://github.com/llvm/llvm-project/commit/6ab8927931851bb42b2c93a00801dc499d7d9b1e |
| depends on CLANG_VERSION >= 130000 |
| # https://github.com/ClangBuiltLinux/linux/issues/1817 |
| depends on AS_IS_GNU || (AS_IS_LLVM && (LD_IS_LLD || LD_VERSION >= 23600)) |
| |
| config GCC_SUPPORTS_DYNAMIC_FTRACE |
| def_bool CC_IS_GCC |
| depends on $(cc-option,-fpatchable-function-entry=8) |
| |
| config ARCH_MMAP_RND_BITS_MIN |
| default 18 if 64BIT |
| default 8 |
| |
| config ARCH_MMAP_RND_COMPAT_BITS_MIN |
| default 8 |
| |
| # max bits determined by the following formula: |
| # VA_BITS - PAGE_SHIFT - 3 |
| config ARCH_MMAP_RND_BITS_MAX |
| default 24 if 64BIT # SV39 based |
| default 17 |
| |
| config ARCH_MMAP_RND_COMPAT_BITS_MAX |
| default 17 |
| |
| # set if we run in machine mode, cleared if we run in supervisor mode |
| config RISCV_M_MODE |
| bool |
| default !MMU |
| |
| # set if we are running in S-mode and can use SBI calls |
| config RISCV_SBI |
| bool |
| depends on !RISCV_M_MODE |
| default y |
| |
| config MMU |
| bool "MMU-based Paged Memory Management Support" |
| default y |
| help |
| Select if you want MMU-based virtualised addressing space |
| support by paged memory management. If unsure, say 'Y'. |
| |
| config PAGE_OFFSET |
| hex |
| default 0xC0000000 if 32BIT && MMU |
| default 0x80000000 if !MMU |
| default 0xff60000000000000 if 64BIT |
| |
| config KASAN_SHADOW_OFFSET |
| hex |
| depends on KASAN_GENERIC |
| default 0xdfffffff00000000 if 64BIT |
| default 0xffffffff if 32BIT |
| |
| config ARCH_FLATMEM_ENABLE |
| def_bool !NUMA |
| |
| config ARCH_SPARSEMEM_ENABLE |
| def_bool y |
| depends on MMU |
| select SPARSEMEM_STATIC if 32BIT && SPARSEMEM |
| select SPARSEMEM_VMEMMAP_ENABLE if 64BIT |
| |
| config ARCH_SELECT_MEMORY_MODEL |
| def_bool ARCH_SPARSEMEM_ENABLE |
| |
| config ARCH_SUPPORTS_UPROBES |
| def_bool y |
| |
| config STACKTRACE_SUPPORT |
| def_bool y |
| |
| config GENERIC_BUG |
| def_bool y |
| depends on BUG |
| select GENERIC_BUG_RELATIVE_POINTERS if 64BIT |
| |
| config GENERIC_BUG_RELATIVE_POINTERS |
| bool |
| |
| config GENERIC_CALIBRATE_DELAY |
| def_bool y |
| |
| config GENERIC_CSUM |
| def_bool y |
| |
| config GENERIC_HWEIGHT |
| def_bool y |
| |
| config FIX_EARLYCON_MEM |
| def_bool MMU |
| |
| config PGTABLE_LEVELS |
| int |
| default 5 if 64BIT |
| default 2 |
| |
| config LOCKDEP_SUPPORT |
| def_bool y |
| |
| config RISCV_DMA_NONCOHERENT |
| bool |
| select ARCH_HAS_DMA_PREP_COHERENT |
| select ARCH_HAS_SETUP_DMA_OPS |
| select ARCH_HAS_SYNC_DMA_FOR_CPU |
| select ARCH_HAS_SYNC_DMA_FOR_DEVICE |
| select DMA_BOUNCE_UNALIGNED_KMALLOC if SWIOTLB |
| select DMA_DIRECT_REMAP |
| |
| config AS_HAS_INSN |
| def_bool $(as-instr,.insn r 51$(comma) 0$(comma) 0$(comma) t0$(comma) t0$(comma) zero) |
| |
| config AS_HAS_OPTION_ARCH |
| # https://reviews.llvm.org/D123515 |
| def_bool y |
| depends on $(as-instr, .option arch$(comma) +m) |
| depends on !$(as-instr, .option arch$(comma) -i) |
| |
| source "arch/riscv/Kconfig.socs" |
| source "arch/riscv/Kconfig.errata" |
| |
| menu "Platform type" |
| |
| config NONPORTABLE |
| bool "Allow configurations that result in non-portable kernels" |
| help |
| RISC-V kernel binaries are compatible between all known systems |
| whenever possible, but there are some use cases that can only be |
| satisfied by configurations that result in kernel binaries that are |
| not portable between systems. |
| |
| Selecting N does not guarantee kernels will be portable to all known |
| systems. Selecting any of the options guarded by NONPORTABLE will |
| result in kernel binaries that are unlikely to be portable between |
| systems. |
| |
| If unsure, say N. |
| |
| choice |
| prompt "Base ISA" |
| default ARCH_RV64I |
| help |
| This selects the base ISA that this kernel will target and must match |
| the target platform. |
| |
| config ARCH_RV32I |
| bool "RV32I" |
| depends on NONPORTABLE |
| select 32BIT |
| select GENERIC_LIB_ASHLDI3 |
| select GENERIC_LIB_ASHRDI3 |
| select GENERIC_LIB_LSHRDI3 |
| select GENERIC_LIB_UCMPDI2 |
| |
| config ARCH_RV64I |
| bool "RV64I" |
| select 64BIT |
| select ARCH_SUPPORTS_INT128 if CC_HAS_INT128 |
| select SWIOTLB if MMU |
| |
| endchoice |
| |
| # We must be able to map all physical memory into the kernel, but the compiler |
| # is still a bit more efficient when generating code if it's setup in a manner |
| # such that it can only map 2GiB of memory. |
| choice |
| prompt "Kernel Code Model" |
| default CMODEL_MEDLOW if 32BIT |
| default CMODEL_MEDANY if 64BIT |
| |
| config CMODEL_MEDLOW |
| bool "medium low code model" |
| config CMODEL_MEDANY |
| bool "medium any code model" |
| endchoice |
| |
| config MODULE_SECTIONS |
| bool |
| select HAVE_MOD_ARCH_SPECIFIC |
| |
| config SMP |
| bool "Symmetric Multi-Processing" |
| help |
| This enables support for systems with more than one CPU. If |
| you say N here, the kernel will run on single and |
| multiprocessor machines, but will use only one CPU of a |
| multiprocessor machine. If you say Y here, the kernel will run |
| on many, but not all, single processor machines. On a single |
| processor machine, the kernel will run faster if you say N |
| here. |
| |
| If you don't know what to do here, say N. |
| |
| config SCHED_MC |
| bool "Multi-core scheduler support" |
| depends on SMP |
| help |
| Multi-core scheduler support improves the CPU scheduler's decision |
| making when dealing with multi-core CPU chips at a cost of slightly |
| increased overhead in some places. If unsure say N here. |
| |
| config NR_CPUS |
| int "Maximum number of CPUs (2-512)" |
| depends on SMP |
| range 2 512 if !RISCV_SBI_V01 |
| range 2 32 if RISCV_SBI_V01 && 32BIT |
| range 2 64 if RISCV_SBI_V01 && 64BIT |
| default "32" if 32BIT |
| default "64" if 64BIT |
| |
| config HOTPLUG_CPU |
| bool "Support for hot-pluggable CPUs" |
| depends on SMP |
| select GENERIC_IRQ_MIGRATION |
| help |
| |
| Say Y here to experiment with turning CPUs off and on. CPUs |
| can be controlled through /sys/devices/system/cpu. |
| |
| Say N if you want to disable CPU hotplug. |
| |
| choice |
| prompt "CPU Tuning" |
| default TUNE_GENERIC |
| |
| config TUNE_GENERIC |
| bool "generic" |
| |
| endchoice |
| |
| # Common NUMA Features |
| config NUMA |
| bool "NUMA Memory Allocation and Scheduler Support" |
| depends on SMP && MMU |
| select ARCH_SUPPORTS_NUMA_BALANCING |
| select GENERIC_ARCH_NUMA |
| select NEED_PER_CPU_EMBED_FIRST_CHUNK |
| select OF_NUMA |
| select USE_PERCPU_NUMA_NODE_ID |
| help |
| Enable NUMA (Non-Uniform Memory Access) support. |
| |
| The kernel will try to allocate memory used by a CPU on the |
| local memory of the CPU and add some more NUMA awareness to the kernel. |
| |
| config NODES_SHIFT |
| int "Maximum NUMA Nodes (as a power of 2)" |
| range 1 10 |
| default "2" |
| depends on NUMA |
| help |
| Specify the maximum number of NUMA Nodes available on the target |
| system. Increases memory reserved to accommodate various tables. |
| |
| config RISCV_ALTERNATIVE |
| bool |
| depends on !XIP_KERNEL |
| help |
| This Kconfig allows the kernel to automatically patch the |
| erratum or cpufeature required by the execution platform at run |
| time. The code patching overhead is minimal, as it's only done |
| once at boot and once on each module load. |
| |
| config RISCV_ALTERNATIVE_EARLY |
| bool |
| depends on RISCV_ALTERNATIVE |
| help |
| Allows early patching of the kernel for special errata |
| |
| config RISCV_ISA_C |
| bool "Emit compressed instructions when building Linux" |
| default y |
| help |
| Adds "C" to the ISA subsets that the toolchain is allowed to emit |
| when building Linux, which results in compressed instructions in the |
| Linux binary. |
| |
| If you don't know what to do here, say Y. |
| |
| config RISCV_ISA_SVNAPOT |
| bool "Svnapot extension support for supervisor mode NAPOT pages" |
| depends on 64BIT && MMU |
| depends on RISCV_ALTERNATIVE |
| default y |
| help |
| Allow kernel to detect the Svnapot ISA-extension dynamically at boot |
| time and enable its usage. |
| |
| The Svnapot extension is used to mark contiguous PTEs as a range |
| of contiguous virtual-to-physical translations for a naturally |
| aligned power-of-2 (NAPOT) granularity larger than the base 4KB page |
| size. When HUGETLBFS is also selected this option unconditionally |
| allocates some memory for each NAPOT page size supported by the kernel. |
| When optimizing for low memory consumption and for platforms without |
| the Svnapot extension, it may be better to say N here. |
| |
| If you don't know what to do here, say Y. |
| |
| config RISCV_ISA_SVPBMT |
| bool "Svpbmt extension support for supervisor mode page-based memory types" |
| depends on 64BIT && MMU |
| depends on RISCV_ALTERNATIVE |
| default y |
| help |
| Adds support to dynamically detect the presence of the Svpbmt |
| ISA-extension (Supervisor-mode: page-based memory types) and |
| enable its usage. |
| |
| The memory type for a page contains a combination of attributes |
| that indicate the cacheability, idempotency, and ordering |
| properties for access to that page. |
| |
| The Svpbmt extension is only available on 64-bit cpus. |
| |
| If you don't know what to do here, say Y. |
| |
| config TOOLCHAIN_HAS_V |
| bool |
| default y |
| depends on !64BIT || $(cc-option,-mabi=lp64 -march=rv64iv) |
| depends on !32BIT || $(cc-option,-mabi=ilp32 -march=rv32iv) |
| depends on LLD_VERSION >= 140000 || LD_VERSION >= 23800 |
| depends on AS_HAS_OPTION_ARCH |
| |
| config RISCV_ISA_V |
| bool "VECTOR extension support" |
| depends on TOOLCHAIN_HAS_V |
| depends on FPU |
| select DYNAMIC_SIGFRAME |
| default y |
| help |
| Say N here if you want to disable all vector related procedure |
| in the kernel. |
| |
| If you don't know what to do here, say Y. |
| |
| config RISCV_ISA_V_DEFAULT_ENABLE |
| bool "Enable userspace Vector by default" |
| depends on RISCV_ISA_V |
| default y |
| help |
| Say Y here if you want to enable Vector in userspace by default. |
| Otherwise, userspace has to make explicit prctl() call to enable |
| Vector, or enable it via the sysctl interface. |
| |
| If you don't know what to do here, say Y. |
| |
| config TOOLCHAIN_HAS_ZBB |
| bool |
| default y |
| depends on !64BIT || $(cc-option,-mabi=lp64 -march=rv64ima_zbb) |
| depends on !32BIT || $(cc-option,-mabi=ilp32 -march=rv32ima_zbb) |
| depends on LLD_VERSION >= 150000 || LD_VERSION >= 23900 |
| depends on AS_HAS_OPTION_ARCH |
| |
| config RISCV_ISA_ZBB |
| bool "Zbb extension support for bit manipulation instructions" |
| depends on TOOLCHAIN_HAS_ZBB |
| depends on MMU |
| depends on RISCV_ALTERNATIVE |
| default y |
| help |
| Adds support to dynamically detect the presence of the ZBB |
| extension (basic bit manipulation) and enable its usage. |
| |
| The Zbb extension provides instructions to accelerate a number |
| of bit-specific operations (count bit population, sign extending, |
| bitrotation, etc). |
| |
| If you don't know what to do here, say Y. |
| |
| config RISCV_ISA_ZICBOM |
| bool "Zicbom extension support for non-coherent DMA operation" |
| depends on MMU |
| depends on RISCV_ALTERNATIVE |
| default y |
| select RISCV_DMA_NONCOHERENT |
| help |
| Adds support to dynamically detect the presence of the ZICBOM |
| extension (Cache Block Management Operations) and enable its |
| usage. |
| |
| The Zicbom extension can be used to handle for example |
| non-coherent DMA support on devices that need it. |
| |
| If you don't know what to do here, say Y. |
| |
| config RISCV_ISA_ZICBOZ |
| bool "Zicboz extension support for faster zeroing of memory" |
| depends on MMU |
| depends on RISCV_ALTERNATIVE |
| default y |
| help |
| Enable the use of the Zicboz extension (cbo.zero instruction) |
| when available. |
| |
| The Zicboz extension is used for faster zeroing of memory. |
| |
| If you don't know what to do here, say Y. |
| |
| config TOOLCHAIN_HAS_ZIHINTPAUSE |
| bool |
| default y |
| depends on !64BIT || $(cc-option,-mabi=lp64 -march=rv64ima_zihintpause) |
| depends on !32BIT || $(cc-option,-mabi=ilp32 -march=rv32ima_zihintpause) |
| depends on LLD_VERSION >= 150000 || LD_VERSION >= 23600 |
| |
| config TOOLCHAIN_NEEDS_EXPLICIT_ZICSR_ZIFENCEI |
| def_bool y |
| # https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=aed44286efa8ae8717a77d94b51ac3614e2ca6dc |
| # https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=98416dbb0a62579d4a7a4a76bab51b5b52fec2cd |
| depends on AS_IS_GNU && AS_VERSION >= 23600 |
| help |
| Binutils-2.38 and GCC-12.1.0 bumped the default ISA spec to the newer |
| 20191213 version, which moves some instructions from the I extension to |
| the Zicsr and Zifencei extensions. This requires explicitly specifying |
| Zicsr and Zifencei when binutils >= 2.38 or GCC >= 12.1.0. Zicsr |
| and Zifencei are supported in binutils from version 2.36 onwards. |
| To make life easier, and avoid forcing toolchains that default to a |
| newer ISA spec to version 2.2, relax the check to binutils >= 2.36. |
| For clang < 17 or GCC < 11.3.0, for which this is not possible or need |
| special treatment, this is dealt with in TOOLCHAIN_NEEDS_OLD_ISA_SPEC. |
| |
| config TOOLCHAIN_NEEDS_OLD_ISA_SPEC |
| def_bool y |
| depends on TOOLCHAIN_NEEDS_EXPLICIT_ZICSR_ZIFENCEI |
| # https://github.com/llvm/llvm-project/commit/22e199e6afb1263c943c0c0d4498694e15bf8a16 |
| # https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=d29f5d6ab513c52fd872f532c492e35ae9fd6671 |
| depends on (CC_IS_CLANG && CLANG_VERSION < 170000) || (CC_IS_GCC && GCC_VERSION < 110300) |
| help |
| Certain versions of clang and GCC do not support zicsr and zifencei via |
| -march. This option causes an older ISA spec compatible with these older |
| versions of clang and GCC to be passed to GAS, which has the same result |
| as passing zicsr and zifencei to -march. |
| |
| config FPU |
| bool "FPU support" |
| default y |
| help |
| Say N here if you want to disable all floating-point related procedure |
| in the kernel. |
| |
| If you don't know what to do here, say Y. |
| |
| config IRQ_STACKS |
| bool "Independent irq & softirq stacks" if EXPERT |
| default y |
| select HAVE_IRQ_EXIT_ON_IRQ_STACK |
| select HAVE_SOFTIRQ_ON_OWN_STACK |
| help |
| Add independent irq & softirq stacks for percpu to prevent kernel stack |
| overflows. We may save some memory footprint by disabling IRQ_STACKS. |
| |
| config THREAD_SIZE_ORDER |
| int "Kernel stack size (in power-of-two numbers of page size)" if VMAP_STACK && EXPERT |
| range 0 4 |
| default 1 if 32BIT && !KASAN |
| default 3 if 64BIT && KASAN |
| default 2 |
| help |
| Specify the Pages of thread stack size (from 4KB to 64KB), which also |
| affects irq stack size, which is equal to thread stack size. |
| |
| endmenu # "Platform type" |
| |
| menu "Kernel features" |
| |
| source "kernel/Kconfig.hz" |
| |
| config RISCV_SBI_V01 |
| bool "SBI v0.1 support" |
| depends on RISCV_SBI |
| help |
| This config allows kernel to use SBI v0.1 APIs. This will be |
| deprecated in future once legacy M-mode software are no longer in use. |
| |
| config RISCV_BOOT_SPINWAIT |
| bool "Spinwait booting method" |
| depends on SMP |
| default y if RISCV_SBI_V01 || RISCV_M_MODE |
| help |
| This enables support for booting Linux via spinwait method. In the |
| spinwait method, all cores randomly jump to Linux. One of the cores |
| gets chosen via lottery and all other keep spinning on a percpu |
| variable. This method cannot support CPU hotplug and sparse hartid |
| scheme. It should be only enabled for M-mode Linux or platforms relying |
| on older firmware without SBI HSM extension. All other platforms should |
| rely on ordered booting via SBI HSM extension which gets chosen |
| dynamically at runtime if the firmware supports it. |
| |
| Since spinwait is incompatible with sparse hart IDs, it requires |
| NR_CPUS be large enough to contain the physical hart ID of the first |
| hart to enter Linux. |
| |
| If unsure what to do here, say N. |
| |
| config ARCH_SUPPORTS_KEXEC |
| def_bool MMU |
| |
| config ARCH_SELECTS_KEXEC |
| def_bool y |
| depends on KEXEC |
| select HOTPLUG_CPU if SMP |
| |
| config ARCH_SUPPORTS_KEXEC_FILE |
| def_bool 64BIT && MMU |
| |
| config ARCH_SELECTS_KEXEC_FILE |
| def_bool y |
| depends on KEXEC_FILE |
| select HAVE_IMA_KEXEC if IMA |
| select KEXEC_ELF |
| |
| config ARCH_SUPPORTS_KEXEC_PURGATORY |
| def_bool KEXEC_FILE |
| depends on CRYPTO=y |
| depends on CRYPTO_SHA256=y |
| |
| config ARCH_SUPPORTS_CRASH_DUMP |
| def_bool y |
| |
| config COMPAT |
| bool "Kernel support for 32-bit U-mode" |
| default 64BIT |
| depends on 64BIT && MMU |
| help |
| This option enables support for a 32-bit U-mode running under a 64-bit |
| kernel at S-mode. riscv32-specific components such as system calls, |
| the user helper functions (vdso), signal rt_frame functions and the |
| ptrace interface are handled appropriately by the kernel. |
| |
| If you want to execute 32-bit userspace applications, say Y. |
| |
| config RELOCATABLE |
| bool "Build a relocatable kernel" |
| depends on MMU && 64BIT && !XIP_KERNEL |
| help |
| This builds a kernel as a Position Independent Executable (PIE), |
| which retains all relocation metadata required to relocate the |
| kernel binary at runtime to a different virtual address than the |
| address it was linked at. |
| Since RISCV uses the RELA relocation format, this requires a |
| relocation pass at runtime even if the kernel is loaded at the |
| same address it was linked at. |
| |
| If unsure, say N. |
| |
| endmenu # "Kernel features" |
| |
| menu "Boot options" |
| |
| config CMDLINE |
| string "Built-in kernel command line" |
| help |
| For most platforms, the arguments for the kernel's command line |
| are provided at run-time, during boot. However, there are cases |
| where either no arguments are being provided or the provided |
| arguments are insufficient or even invalid. |
| |
| When that occurs, it is possible to define a built-in command |
| line here and choose how the kernel should use it later on. |
| |
| choice |
| prompt "Built-in command line usage" if CMDLINE != "" |
| default CMDLINE_FALLBACK |
| help |
| Choose how the kernel will handle the provided built-in command |
| line. |
| |
| config CMDLINE_FALLBACK |
| bool "Use bootloader kernel arguments if available" |
| help |
| Use the built-in command line as fallback in case we get nothing |
| during boot. This is the default behaviour. |
| |
| config CMDLINE_EXTEND |
| bool "Extend bootloader kernel arguments" |
| help |
| The command-line arguments provided during boot will be |
| appended to the built-in command line. This is useful in |
| cases where the provided arguments are insufficient and |
| you don't want to or cannot modify them. |
| |
| config CMDLINE_FORCE |
| bool "Always use the default kernel command string" |
| help |
| Always use the built-in command line, even if we get one during |
| boot. This is useful in case you need to override the provided |
| command line on systems where you don't have or want control |
| over it. |
| |
| endchoice |
| |
| config EFI_STUB |
| bool |
| |
| config EFI |
| bool "UEFI runtime support" |
| depends on OF && !XIP_KERNEL |
| depends on MMU |
| default y |
| select ARCH_SUPPORTS_ACPI if 64BIT |
| select EFI_GENERIC_STUB |
| select EFI_PARAMS_FROM_FDT |
| select EFI_RUNTIME_WRAPPERS |
| select EFI_STUB |
| select LIBFDT |
| select RISCV_ISA_C |
| select UCS2_STRING |
| help |
| This option provides support for runtime services provided |
| by UEFI firmware (such as non-volatile variables, realtime |
| clock, and platform reset). A UEFI stub is also provided to |
| allow the kernel to be booted as an EFI application. This |
| is only useful on systems that have UEFI firmware. |
| |
| config CC_HAVE_STACKPROTECTOR_TLS |
| def_bool $(cc-option,-mstack-protector-guard=tls -mstack-protector-guard-reg=tp -mstack-protector-guard-offset=0) |
| |
| config STACKPROTECTOR_PER_TASK |
| def_bool y |
| depends on !RANDSTRUCT |
| depends on STACKPROTECTOR && CC_HAVE_STACKPROTECTOR_TLS |
| |
| config PHYS_RAM_BASE_FIXED |
| bool "Explicitly specified physical RAM address" |
| depends on NONPORTABLE |
| default n |
| |
| config PHYS_RAM_BASE |
| hex "Platform Physical RAM address" |
| depends on PHYS_RAM_BASE_FIXED |
| default "0x80000000" |
| help |
| This is the physical address of RAM in the system. It has to be |
| explicitly specified to run early relocations of read-write data |
| from flash to RAM. |
| |
| config XIP_KERNEL |
| bool "Kernel Execute-In-Place from ROM" |
| depends on MMU && SPARSEMEM && NONPORTABLE |
| # This prevents XIP from being enabled by all{yes,mod}config, which |
| # fail to build since XIP doesn't support large kernels. |
| depends on !COMPILE_TEST |
| select PHYS_RAM_BASE_FIXED |
| help |
| Execute-In-Place allows the kernel to run from non-volatile storage |
| directly addressable by the CPU, such as NOR flash. This saves RAM |
| space since the text section of the kernel is not loaded from flash |
| to RAM. Read-write sections, such as the data section and stack, |
| are still copied to RAM. The XIP kernel is not compressed since |
| it has to run directly from flash, so it will take more space to |
| store it. The flash address used to link the kernel object files, |
| and for storing it, is configuration dependent. Therefore, if you |
| say Y here, you must know the proper physical address where to |
| store the kernel image depending on your own flash memory usage. |
| |
| Also note that the make target becomes "make xipImage" rather than |
| "make zImage" or "make Image". The final kernel binary to put in |
| ROM memory will be arch/riscv/boot/xipImage. |
| |
| SPARSEMEM is required because the kernel text and rodata that are |
| flash resident are not backed by memmap, then any attempt to get |
| a struct page on those regions will trigger a fault. |
| |
| If unsure, say N. |
| |
| config XIP_PHYS_ADDR |
| hex "XIP Kernel Physical Location" |
| depends on XIP_KERNEL |
| default "0x21000000" |
| help |
| This is the physical address in your flash memory the kernel will |
| be linked for and stored to. This address is dependent on your |
| own flash usage. |
| |
| config RISCV_ISA_FALLBACK |
| bool "Permit falling back to parsing riscv,isa for extension support by default" |
| default y |
| help |
| Parsing the "riscv,isa" devicetree property has been deprecated and |
| replaced by a list of explicitly defined strings. For compatibility |
| with existing platforms, the kernel will fall back to parsing the |
| "riscv,isa" property if the replacements are not found. |
| |
| Selecting N here will result in a kernel that does not use the |
| fallback, unless the commandline "riscv_isa_fallback" parameter is |
| present. |
| |
| Please see the dt-binding, located at |
| Documentation/devicetree/bindings/riscv/extensions.yaml for details |
| on the replacement properties, "riscv,isa-base" and |
| "riscv,isa-extensions". |
| |
| endmenu # "Boot options" |
| |
| config BUILTIN_DTB |
| bool |
| depends on OF && NONPORTABLE |
| default y if XIP_KERNEL |
| |
| config PORTABLE |
| bool |
| default !NONPORTABLE |
| select EFI |
| select MMU |
| select OF |
| |
| menu "Power management options" |
| |
| source "kernel/power/Kconfig" |
| |
| # Hibernation is only possible on systems where the SBI implementation has |
| # marked its reserved memory as not accessible from, or does not run |
| # from the same memory as, Linux |
| config ARCH_HIBERNATION_POSSIBLE |
| def_bool NONPORTABLE |
| |
| config ARCH_HIBERNATION_HEADER |
| def_bool HIBERNATION |
| |
| config ARCH_SUSPEND_POSSIBLE |
| def_bool y |
| |
| endmenu # "Power management options" |
| |
| menu "CPU Power Management" |
| |
| source "drivers/cpuidle/Kconfig" |
| |
| source "drivers/cpufreq/Kconfig" |
| |
| endmenu # "CPU Power Management" |
| |
| source "arch/riscv/kvm/Kconfig" |
| |
| source "drivers/acpi/Kconfig" |