blob: 7f5434b34d0d737e87b5511070b4cdc4cb96315e [file] [log] [blame]
/******************************************************************************
*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
* Copyright(c) 2017 Intel Deutschland GmbH
* Copyright(c) 2018 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* The full GNU General Public License is included in this distribution
* in the file called COPYING.
*
* Contact Information:
* Intel Linux Wireless <linuxwifi@intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
* BSD LICENSE
*
* Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
* Copyright(c) 2018 Intel Corporation
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*****************************************************************************/
#include <net/mac80211.h>
#include "fw-api.h"
#include "mvm.h"
/* Maps the driver specific channel width definition to the fw values */
u8 iwl_mvm_get_channel_width(struct cfg80211_chan_def *chandef)
{
switch (chandef->width) {
case NL80211_CHAN_WIDTH_20_NOHT:
case NL80211_CHAN_WIDTH_20:
return PHY_VHT_CHANNEL_MODE20;
case NL80211_CHAN_WIDTH_40:
return PHY_VHT_CHANNEL_MODE40;
case NL80211_CHAN_WIDTH_80:
return PHY_VHT_CHANNEL_MODE80;
case NL80211_CHAN_WIDTH_160:
return PHY_VHT_CHANNEL_MODE160;
default:
WARN(1, "Invalid channel width=%u", chandef->width);
return PHY_VHT_CHANNEL_MODE20;
}
}
/*
* Maps the driver specific control channel position (relative to the center
* freq) definitions to the the fw values
*/
u8 iwl_mvm_get_ctrl_pos(struct cfg80211_chan_def *chandef)
{
switch (chandef->chan->center_freq - chandef->center_freq1) {
case -70:
return PHY_VHT_CTRL_POS_4_BELOW;
case -50:
return PHY_VHT_CTRL_POS_3_BELOW;
case -30:
return PHY_VHT_CTRL_POS_2_BELOW;
case -10:
return PHY_VHT_CTRL_POS_1_BELOW;
case 10:
return PHY_VHT_CTRL_POS_1_ABOVE;
case 30:
return PHY_VHT_CTRL_POS_2_ABOVE;
case 50:
return PHY_VHT_CTRL_POS_3_ABOVE;
case 70:
return PHY_VHT_CTRL_POS_4_ABOVE;
default:
WARN(1, "Invalid channel definition");
case 0:
/*
* The FW is expected to check the control channel position only
* when in HT/VHT and the channel width is not 20MHz. Return
* this value as the default one.
*/
return PHY_VHT_CTRL_POS_1_BELOW;
}
}
/*
* Construct the generic fields of the PHY context command
*/
static void iwl_mvm_phy_ctxt_cmd_hdr(struct iwl_mvm_phy_ctxt *ctxt,
struct iwl_phy_context_cmd *cmd,
u32 action, u32 apply_time)
{
memset(cmd, 0, sizeof(struct iwl_phy_context_cmd));
cmd->id_and_color = cpu_to_le32(FW_CMD_ID_AND_COLOR(ctxt->id,
ctxt->color));
cmd->action = cpu_to_le32(action);
cmd->apply_time = cpu_to_le32(apply_time);
}
/*
* Add the phy configuration to the PHY context command
*/
static void iwl_mvm_phy_ctxt_cmd_data(struct iwl_mvm *mvm,
struct iwl_phy_context_cmd *cmd,
struct cfg80211_chan_def *chandef,
u8 chains_static, u8 chains_dynamic)
{
u8 active_cnt, idle_cnt;
/* Set the channel info data */
cmd->ci.band = (chandef->chan->band == NL80211_BAND_2GHZ ?
PHY_BAND_24 : PHY_BAND_5);
cmd->ci.channel = chandef->chan->hw_value;
cmd->ci.width = iwl_mvm_get_channel_width(chandef);
cmd->ci.ctrl_pos = iwl_mvm_get_ctrl_pos(chandef);
/* Set rx the chains */
idle_cnt = chains_static;
active_cnt = chains_dynamic;
/* In scenarios where we only ever use a single-stream rates,
* i.e. legacy 11b/g/a associations, single-stream APs or even
* static SMPS, enable both chains to get diversity, improving
* the case where we're far enough from the AP that attenuation
* between the two antennas is sufficiently different to impact
* performance.
*/
if (active_cnt == 1 && iwl_mvm_rx_diversity_allowed(mvm)) {
idle_cnt = 2;
active_cnt = 2;
}
cmd->rxchain_info = cpu_to_le32(iwl_mvm_get_valid_rx_ant(mvm) <<
PHY_RX_CHAIN_VALID_POS);
cmd->rxchain_info |= cpu_to_le32(idle_cnt << PHY_RX_CHAIN_CNT_POS);
cmd->rxchain_info |= cpu_to_le32(active_cnt <<
PHY_RX_CHAIN_MIMO_CNT_POS);
#ifdef CONFIG_IWLWIFI_DEBUGFS
if (unlikely(mvm->dbgfs_rx_phyinfo))
cmd->rxchain_info = cpu_to_le32(mvm->dbgfs_rx_phyinfo);
#endif
cmd->txchain_info = cpu_to_le32(iwl_mvm_get_valid_tx_ant(mvm));
}
/*
* Send a command to apply the current phy configuration. The command is send
* only if something in the configuration changed: in case that this is the
* first time that the phy configuration is applied or in case that the phy
* configuration changed from the previous apply.
*/
static int iwl_mvm_phy_ctxt_apply(struct iwl_mvm *mvm,
struct iwl_mvm_phy_ctxt *ctxt,
struct cfg80211_chan_def *chandef,
u8 chains_static, u8 chains_dynamic,
u32 action, u32 apply_time)
{
struct iwl_phy_context_cmd cmd;
int ret;
/* Set the command header fields */
iwl_mvm_phy_ctxt_cmd_hdr(ctxt, &cmd, action, apply_time);
/* Set the command data */
iwl_mvm_phy_ctxt_cmd_data(mvm, &cmd, chandef,
chains_static, chains_dynamic);
ret = iwl_mvm_send_cmd_pdu(mvm, PHY_CONTEXT_CMD, 0,
sizeof(struct iwl_phy_context_cmd),
&cmd);
if (ret)
IWL_ERR(mvm, "PHY ctxt cmd error. ret=%d\n", ret);
return ret;
}
/*
* Send a command to add a PHY context based on the current HW configuration.
*/
int iwl_mvm_phy_ctxt_add(struct iwl_mvm *mvm, struct iwl_mvm_phy_ctxt *ctxt,
struct cfg80211_chan_def *chandef,
u8 chains_static, u8 chains_dynamic)
{
WARN_ON(!test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status) &&
ctxt->ref);
lockdep_assert_held(&mvm->mutex);
ctxt->channel = chandef->chan;
return iwl_mvm_phy_ctxt_apply(mvm, ctxt, chandef,
chains_static, chains_dynamic,
FW_CTXT_ACTION_ADD, 0);
}
/*
* Update the number of references to the given PHY context. This is valid only
* in case the PHY context was already created, i.e., its reference count > 0.
*/
void iwl_mvm_phy_ctxt_ref(struct iwl_mvm *mvm, struct iwl_mvm_phy_ctxt *ctxt)
{
lockdep_assert_held(&mvm->mutex);
ctxt->ref++;
}
/*
* Send a command to modify the PHY context based on the current HW
* configuration. Note that the function does not check that the configuration
* changed.
*/
int iwl_mvm_phy_ctxt_changed(struct iwl_mvm *mvm, struct iwl_mvm_phy_ctxt *ctxt,
struct cfg80211_chan_def *chandef,
u8 chains_static, u8 chains_dynamic)
{
enum iwl_ctxt_action action = FW_CTXT_ACTION_MODIFY;
lockdep_assert_held(&mvm->mutex);
if (fw_has_capa(&mvm->fw->ucode_capa,
IWL_UCODE_TLV_CAPA_BINDING_CDB_SUPPORT) &&
ctxt->channel->band != chandef->chan->band) {
int ret;
/* ... remove it here ...*/
ret = iwl_mvm_phy_ctxt_apply(mvm, ctxt, chandef,
chains_static, chains_dynamic,
FW_CTXT_ACTION_REMOVE, 0);
if (ret)
return ret;
/* ... and proceed to add it again */
action = FW_CTXT_ACTION_ADD;
}
ctxt->channel = chandef->chan;
ctxt->width = chandef->width;
return iwl_mvm_phy_ctxt_apply(mvm, ctxt, chandef,
chains_static, chains_dynamic,
action, 0);
}
void iwl_mvm_phy_ctxt_unref(struct iwl_mvm *mvm, struct iwl_mvm_phy_ctxt *ctxt)
{
lockdep_assert_held(&mvm->mutex);
if (WARN_ON_ONCE(!ctxt))
return;
ctxt->ref--;
/*
* Move unused phy's to a default channel. When the phy is moved the,
* fw will cleanup immediate quiet bit if it was previously set,
* otherwise we might not be able to reuse this phy.
*/
if (ctxt->ref == 0) {
struct ieee80211_channel *chan;
struct cfg80211_chan_def chandef;
chan = &mvm->hw->wiphy->bands[NL80211_BAND_2GHZ]->channels[0];
cfg80211_chandef_create(&chandef, chan, NL80211_CHAN_NO_HT);
iwl_mvm_phy_ctxt_changed(mvm, ctxt, &chandef, 1, 1);
}
}
static void iwl_mvm_binding_iterator(void *_data, u8 *mac,
struct ieee80211_vif *vif)
{
unsigned long *data = _data;
struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
if (!mvmvif->phy_ctxt)
return;
if (vif->type == NL80211_IFTYPE_STATION ||
vif->type == NL80211_IFTYPE_AP)
__set_bit(mvmvif->phy_ctxt->id, data);
}
int iwl_mvm_phy_ctx_count(struct iwl_mvm *mvm)
{
unsigned long phy_ctxt_counter = 0;
ieee80211_iterate_active_interfaces_atomic(mvm->hw,
IEEE80211_IFACE_ITER_NORMAL,
iwl_mvm_binding_iterator,
&phy_ctxt_counter);
return hweight8(phy_ctxt_counter);
}