Merge tag 'tty-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty/serial driver fixes for 6.6-rc6 that resolve
some reported issues. Included in here are:
- serial core pm runtime fix for issue reported by many
- 8250_omap driver fix
- rs485 spinlock fix for reported problem
- ams-delta bugfix for previous tty api changes in -rc1 that missed
this driver that never seems to get built in any test systems
All of these have been in linux-next for over a week with no reported
problems"
* tag 'tty-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
ASoC: ti: ams-delta: Fix cx81801_receive() argument types
serial: core: Fix checks for tx runtime PM state
serial: 8250_omap: Fix errors with no_console_suspend
serial: Reduce spinlocked portion of uart_rs485_config()
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index 26dd089..ca972fd 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -1617,7 +1617,7 @@ static int omap8250_suspend(struct device *dev)
{
struct omap8250_priv *priv = dev_get_drvdata(dev);
struct uart_8250_port *up = serial8250_get_port(priv->line);
- int err;
+ int err = 0;
serial8250_suspend_port(priv->line);
@@ -1627,7 +1627,8 @@ static int omap8250_suspend(struct device *dev)
if (!device_may_wakeup(dev))
priv->wer = 0;
serial_out(up, UART_OMAP_WER, priv->wer);
- err = pm_runtime_force_suspend(dev);
+ if (uart_console(&up->port) && console_suspend_enabled)
+ err = pm_runtime_force_suspend(dev);
flush_work(&priv->qos_work);
return err;
@@ -1636,11 +1637,15 @@ static int omap8250_suspend(struct device *dev)
static int omap8250_resume(struct device *dev)
{
struct omap8250_priv *priv = dev_get_drvdata(dev);
+ struct uart_8250_port *up = serial8250_get_port(priv->line);
int err;
- err = pm_runtime_force_resume(dev);
- if (err)
- return err;
+ if (uart_console(&up->port) && console_suspend_enabled) {
+ err = pm_runtime_force_resume(dev);
+ if (err)
+ return err;
+ }
+
serial8250_resume_port(priv->line);
/* Paired with pm_runtime_resume_and_get() in omap8250_suspend() */
pm_runtime_mark_last_busy(dev);
@@ -1717,16 +1722,6 @@ static int omap8250_runtime_suspend(struct device *dev)
if (priv->line >= 0)
up = serial8250_get_port(priv->line);
- /*
- * When using 'no_console_suspend', the console UART must not be
- * suspended. Since driver suspend is managed by runtime suspend,
- * preventing runtime suspend (by returning error) will keep device
- * active during suspend.
- */
- if (priv->is_suspending && !console_suspend_enabled) {
- if (up && uart_console(&up->port))
- return -EBUSY;
- }
if (priv->habit & UART_ERRATA_CLOCK_DISABLE) {
int ret;
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 7bdc21d..d5ba6e9 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -156,7 +156,7 @@ static void __uart_start(struct uart_state *state)
* enabled, serial_port_runtime_resume() calls start_tx() again
* after enabling the device.
*/
- if (pm_runtime_active(&port_dev->dev))
+ if (!pm_runtime_enabled(port->dev) || pm_runtime_active(port->dev))
port->ops->start_tx(port);
pm_runtime_mark_last_busy(&port_dev->dev);
pm_runtime_put_autosuspend(&port_dev->dev);
@@ -1404,12 +1404,18 @@ static void uart_set_rs485_termination(struct uart_port *port,
static int uart_rs485_config(struct uart_port *port)
{
struct serial_rs485 *rs485 = &port->rs485;
+ unsigned long flags;
int ret;
+ if (!(rs485->flags & SER_RS485_ENABLED))
+ return 0;
+
uart_sanitize_serial_rs485(port, rs485);
uart_set_rs485_termination(port, rs485);
+ spin_lock_irqsave(&port->lock, flags);
ret = port->rs485_config(port, NULL, rs485);
+ spin_unlock_irqrestore(&port->lock, flags);
if (ret)
memset(rs485, 0, sizeof(*rs485));
@@ -2474,11 +2480,10 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
if (ret == 0) {
if (tty)
uart_change_line_settings(tty, state, NULL);
+ uart_rs485_config(uport);
spin_lock_irq(&uport->lock);
if (!(uport->rs485.flags & SER_RS485_ENABLED))
ops->set_mctrl(uport, uport->mctrl);
- else
- uart_rs485_config(uport);
ops->start_tx(uport);
spin_unlock_irq(&uport->lock);
tty_port_set_initialized(port, true);
@@ -2587,10 +2592,10 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state,
port->mctrl &= TIOCM_DTR;
if (!(port->rs485.flags & SER_RS485_ENABLED))
port->ops->set_mctrl(port, port->mctrl);
- else
- uart_rs485_config(port);
spin_unlock_irqrestore(&port->lock, flags);
+ uart_rs485_config(port);
+
/*
* If this driver supports console, and it hasn't been
* successfully registered yet, try to re-register it.
diff --git a/sound/soc/ti/ams-delta.c b/sound/soc/ti/ams-delta.c
index 3719433..666057d 100644
--- a/sound/soc/ti/ams-delta.c
+++ b/sound/soc/ti/ams-delta.c
@@ -336,8 +336,8 @@ static void cx81801_hangup(struct tty_struct *tty)
}
/* Line discipline .receive_buf() */
-static void cx81801_receive(struct tty_struct *tty, const u8 *cp,
- const char *fp, int count)
+static void cx81801_receive(struct tty_struct *tty, const u8 *cp, const u8 *fp,
+ size_t count)
{
struct snd_soc_component *component = tty->disc_data;
const unsigned char *c;
