diff --git a/Documentation/ABI/testing/sysfs-class-firmware b/Documentation/ABI/testing/sysfs-class-firmware
index 978d3d5..fba87a5 100644
--- a/Documentation/ABI/testing/sysfs-class-firmware
+++ b/Documentation/ABI/testing/sysfs-class-firmware
@@ -1,7 +1,7 @@
 What: 		/sys/class/firmware/.../data
 Date:		July 2022
 KernelVersion:	5.19
-Contact:	Russ Weight <russell.h.weight@intel.com>
+Contact:	Russ Weight <russ.weight@linux.dev>
 Description:	The data sysfs file is used for firmware-fallback and for
 		firmware uploads. Cat a firmware image to this sysfs file
 		after you echo 1 to the loading sysfs file. When the firmware
@@ -13,7 +13,7 @@
 What: 		/sys/class/firmware/.../cancel
 Date:		July 2022
 KernelVersion:	5.19
-Contact:	Russ Weight <russell.h.weight@intel.com>
+Contact:	Russ Weight <russ.weight@linux.dev>
 Description:	Write-only. For firmware uploads, write a "1" to this file to
 		request that the transfer of firmware data to the lower-level
 		device be canceled. This request will be rejected (EBUSY) if
@@ -23,7 +23,7 @@
 What: 		/sys/class/firmware/.../error
 Date:		July 2022
 KernelVersion:	5.19
-Contact:	Russ Weight <russell.h.weight@intel.com>
+Contact:	Russ Weight <russ.weight@linux.dev>
 Description:	Read-only. Returns a string describing a failed firmware
 		upload. This string will be in the form of <STATUS>:<ERROR>,
 		where <STATUS> will be one of the status strings described
@@ -37,7 +37,7 @@
 What: 		/sys/class/firmware/.../loading
 Date:		July 2022
 KernelVersion:	5.19
-Contact:	Russ Weight <russell.h.weight@intel.com>
+Contact:	Russ Weight <russ.weight@linux.dev>
 Description:	The loading sysfs file is used for both firmware-fallback and
 		for firmware uploads. Echo 1 onto the loading file to indicate
 		you are writing a firmware file to the data sysfs node. Echo
@@ -49,7 +49,7 @@
 What: 		/sys/class/firmware/.../remaining_size
 Date:		July 2022
 KernelVersion:	5.19
-Contact:	Russ Weight <russell.h.weight@intel.com>
+Contact:	Russ Weight <russ.weight@linux.dev>
 Description:	Read-only. For firmware upload, this file contains the size
 		of the firmware data that remains to be transferred to the
 		lower-level device driver. The size value is initialized to
@@ -62,7 +62,7 @@
 What: 		/sys/class/firmware/.../status
 Date:		July 2022
 KernelVersion:	5.19
-Contact:	Russ Weight <russell.h.weight@intel.com>
+Contact:	Russ Weight <russ.weight@linux.dev>
 Description:	Read-only. Returns a string describing the current status of
 		a firmware upload. The string will be one of the following:
 		idle, "receiving", "preparing", "transferring", "programming".
@@ -70,7 +70,7 @@
 What: 		/sys/class/firmware/.../timeout
 Date:		July 2022
 KernelVersion:	5.19
-Contact:	Russ Weight <russell.h.weight@intel.com>
+Contact:	Russ Weight <russ.weight@linux.dev>
 Description:	This file supports the timeout mechanism for firmware
 		fallback.  This file has no affect on firmware uploads. For
 		more information on timeouts please see the documentation
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
index 7cc4ddc..2aa1f4b 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
@@ -61,7 +61,7 @@
     required:
       - reg
 
-    additionalProperties: true
+    additionalProperties: false
 
 allOf:
   - $ref: /schemas/spi/spi-peripheral-props.yaml#
diff --git a/Documentation/devicetree/bindings/iio/light/rohm,bu27010.yaml b/Documentation/devicetree/bindings/iio/light/rohm,bu27010.yaml
index 8376d64..bed42d5 100644
--- a/Documentation/devicetree/bindings/iio/light/rohm,bu27010.yaml
+++ b/Documentation/devicetree/bindings/iio/light/rohm,bu27010.yaml
@@ -45,5 +45,6 @@
       light-sensor@38 {
         compatible = "rohm,bu27010";
         reg = <0x38>;
+        vdd-supply = <&vdd>;
       };
     };
diff --git a/Documentation/process/embargoed-hardware-issues.rst b/Documentation/process/embargoed-hardware-issues.rst
index ac7c52f..31000f0 100644
--- a/Documentation/process/embargoed-hardware-issues.rst
+++ b/Documentation/process/embargoed-hardware-issues.rst
@@ -25,15 +25,15 @@
 The Linux kernel hardware security team is separate from the regular Linux
 kernel security team.
 
-The team only handles the coordination of embargoed hardware security
-issues.  Reports of pure software security bugs in the Linux kernel are not
+The team only handles developing fixes for embargoed hardware security
+issues. Reports of pure software security bugs in the Linux kernel are not
 handled by this team and the reporter will be guided to contact the regular
 Linux kernel security team (:ref:`Documentation/admin-guide/
 <securitybugs>`) instead.
 
 The team can be contacted by email at <hardware-security@kernel.org>. This
-is a private list of security officers who will help you to coordinate an
-issue according to our documented process.
+is a private list of security officers who will help you to coordinate a
+fix according to our documented process.
 
 The list is encrypted and email to the list can be sent by either PGP or
 S/MIME encrypted and must be signed with the reporter's PGP key or S/MIME
@@ -132,11 +132,11 @@
 
 The hardware security team will provide an incident-specific encrypted
 mailing-list which will be used for initial discussion with the reporter,
-further disclosure and coordination.
+further disclosure, and coordination of fixes.
 
 The hardware security team will provide the disclosing party a list of
 developers (domain experts) who should be informed initially about the
-issue after confirming with the developers  that they will adhere to this
+issue after confirming with the developers that they will adhere to this
 Memorandum of Understanding and the documented process. These developers
 form the initial response team and will be responsible for handling the
 issue after initial contact. The hardware security team is supporting the
@@ -209,13 +209,18 @@
 After acknowledgement or resolution of an objection the expert is disclosed
 by the incident team and brought into the development process.
 
+List participants may not communicate about the issue outside of the
+private mailing list. List participants may not use any shared resources
+(e.g. employer build farms, CI systems, etc) when working on patches.
+
 
 Coordinated release
 """""""""""""""""""
 
 The involved parties will negotiate the date and time where the embargo
 ends. At that point the prepared mitigations are integrated into the
-relevant kernel trees and published.
+relevant kernel trees and published. There is no pre-notification process:
+fixes are published in public and available to everyone at the same time.
 
 While we understand that hardware security issues need coordinated embargo
 time, the embargo time should be constrained to the minimum time which is
diff --git a/MAINTAINERS b/MAINTAINERS
index 4b2c378..7a7bd8b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8110,7 +8110,7 @@
 
 FIRMWARE LOADER (request_firmware)
 M:	Luis Chamberlain <mcgrof@kernel.org>
-M:	Russ Weight <russell.h.weight@intel.com>
+M:	Russ Weight <russ.weight@linux.dev>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	Documentation/firmware_class/
diff --git a/drivers/android/binder.c b/drivers/android/binder.c
index 367afac..92128aa 100644
--- a/drivers/android/binder.c
+++ b/drivers/android/binder.c
@@ -4812,6 +4812,8 @@ static void binder_release_work(struct binder_proc *proc,
 				"undelivered TRANSACTION_ERROR: %u\n",
 				e->cmd);
 		} break;
+		case BINDER_WORK_TRANSACTION_PENDING:
+		case BINDER_WORK_TRANSACTION_ONEWAY_SPAM_SUSPECT:
 		case BINDER_WORK_TRANSACTION_COMPLETE: {
 			binder_debug(BINDER_DEBUG_DEAD_TRANSACTION,
 				"undelivered TRANSACTION_COMPLETE\n");
diff --git a/drivers/counter/counter-chrdev.c b/drivers/counter/counter-chrdev.c
index 80acdf6..afc94d0 100644
--- a/drivers/counter/counter-chrdev.c
+++ b/drivers/counter/counter-chrdev.c
@@ -247,8 +247,8 @@ static int counter_get_ext(const struct counter_comp *const ext,
 		if (*id == component_id)
 			return 0;
 
-		if (ext->type == COUNTER_COMP_ARRAY) {
-			element = ext->priv;
+		if (ext[*ext_idx].type == COUNTER_COMP_ARRAY) {
+			element = ext[*ext_idx].priv;
 
 			if (component_id - *id < element->length)
 				return 0;
diff --git a/drivers/counter/microchip-tcb-capture.c b/drivers/counter/microchip-tcb-capture.c
index 975e431..b3e615c 100644
--- a/drivers/counter/microchip-tcb-capture.c
+++ b/drivers/counter/microchip-tcb-capture.c
@@ -97,7 +97,7 @@ static int mchp_tc_count_function_write(struct counter_device *counter,
 		priv->qdec_mode = 0;
 		/* Set highest rate based on whether soc has gclk or not */
 		bmr &= ~(ATMEL_TC_QDEN | ATMEL_TC_POSEN);
-		if (priv->tc_cfg->has_gclk)
+		if (!priv->tc_cfg->has_gclk)
 			cmr |= ATMEL_TC_TIMER_CLOCK2;
 		else
 			cmr |= ATMEL_TC_TIMER_CLOCK1;
diff --git a/drivers/hwtracing/coresight/coresight-tmc-etr.c b/drivers/hwtracing/coresight/coresight-tmc-etr.c
index 66dc5f9..8311e10 100644
--- a/drivers/hwtracing/coresight/coresight-tmc-etr.c
+++ b/drivers/hwtracing/coresight/coresight-tmc-etr.c
@@ -610,7 +610,8 @@ static int tmc_etr_alloc_flat_buf(struct tmc_drvdata *drvdata,
 
 	flat_buf->vaddr = dma_alloc_noncoherent(real_dev, etr_buf->size,
 						&flat_buf->daddr,
-						DMA_FROM_DEVICE, GFP_KERNEL);
+						DMA_FROM_DEVICE,
+						GFP_KERNEL | __GFP_NOWARN);
 	if (!flat_buf->vaddr) {
 		kfree(flat_buf);
 		return -ENOMEM;
@@ -1174,16 +1175,6 @@ static struct etr_buf *tmc_etr_get_sysfs_buffer(struct coresight_device *csdev)
 	}
 
 	/*
-	 * In sysFS mode we can have multiple writers per sink.  Since this
-	 * sink is already enabled no memory is needed and the HW need not be
-	 * touched, even if the buffer size has changed.
-	 */
-	if (drvdata->mode == CS_MODE_SYSFS) {
-		atomic_inc(&csdev->refcnt);
-		goto out;
-	}
-
-	/*
 	 * If we don't have a buffer or it doesn't match the requested size,
 	 * use the buffer allocated above. Otherwise reuse the existing buffer.
 	 */
@@ -1204,7 +1195,7 @@ static struct etr_buf *tmc_etr_get_sysfs_buffer(struct coresight_device *csdev)
 
 static int tmc_enable_etr_sink_sysfs(struct coresight_device *csdev)
 {
-	int ret;
+	int ret = 0;
 	unsigned long flags;
 	struct tmc_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
 	struct etr_buf *sysfs_buf = tmc_etr_get_sysfs_buffer(csdev);
@@ -1213,12 +1204,24 @@ static int tmc_enable_etr_sink_sysfs(struct coresight_device *csdev)
 		return PTR_ERR(sysfs_buf);
 
 	spin_lock_irqsave(&drvdata->spinlock, flags);
+
+	/*
+	 * In sysFS mode we can have multiple writers per sink.  Since this
+	 * sink is already enabled no memory is needed and the HW need not be
+	 * touched, even if the buffer size has changed.
+	 */
+	if (drvdata->mode == CS_MODE_SYSFS) {
+		atomic_inc(&csdev->refcnt);
+		goto out;
+	}
+
 	ret = tmc_etr_enable_hw(drvdata, sysfs_buf);
 	if (!ret) {
 		drvdata->mode = CS_MODE_SYSFS;
 		atomic_inc(&csdev->refcnt);
 	}
 
+out:
 	spin_unlock_irqrestore(&drvdata->spinlock, flags);
 
 	if (!ret)
diff --git a/drivers/iio/adc/ad7192.c b/drivers/iio/adc/ad7192.c
index 69d1103..b64fd36 100644
--- a/drivers/iio/adc/ad7192.c
+++ b/drivers/iio/adc/ad7192.c
@@ -177,6 +177,7 @@ struct ad7192_chip_info {
 struct ad7192_state {
 	const struct ad7192_chip_info	*chip_info;
 	struct regulator		*avdd;
+	struct regulator		*vref;
 	struct clk			*mclk;
 	u16				int_vref_mv;
 	u32				fclk;
@@ -1008,10 +1009,30 @@ static int ad7192_probe(struct spi_device *spi)
 	if (ret)
 		return dev_err_probe(&spi->dev, ret, "Failed to enable specified DVdd supply\n");
 
-	ret = regulator_get_voltage(st->avdd);
-	if (ret < 0) {
-		dev_err(&spi->dev, "Device tree error, reference voltage undefined\n");
-		return ret;
+	st->vref = devm_regulator_get_optional(&spi->dev, "vref");
+	if (IS_ERR(st->vref)) {
+		if (PTR_ERR(st->vref) != -ENODEV)
+			return PTR_ERR(st->vref);
+
+		ret = regulator_get_voltage(st->avdd);
+		if (ret < 0)
+			return dev_err_probe(&spi->dev, ret,
+					     "Device tree error, AVdd voltage undefined\n");
+	} else {
+		ret = regulator_enable(st->vref);
+		if (ret) {
+			dev_err(&spi->dev, "Failed to enable specified Vref supply\n");
+			return ret;
+		}
+
+		ret = devm_add_action_or_reset(&spi->dev, ad7192_reg_disable, st->vref);
+		if (ret)
+			return ret;
+
+		ret = regulator_get_voltage(st->vref);
+		if (ret < 0)
+			return dev_err_probe(&spi->dev, ret,
+					     "Device tree error, Vref voltage undefined\n");
 	}
 	st->int_vref_mv = ret / 1000;
 
diff --git a/drivers/iio/adc/imx8qxp-adc.c b/drivers/iio/adc/imx8qxp-adc.c
index f5a0fc9..fff6e5a 100644
--- a/drivers/iio/adc/imx8qxp-adc.c
+++ b/drivers/iio/adc/imx8qxp-adc.c
@@ -38,8 +38,8 @@
 #define IMX8QXP_ADR_ADC_FCTRL		0x30
 #define IMX8QXP_ADR_ADC_SWTRIG		0x34
 #define IMX8QXP_ADR_ADC_TCTRL(tid)	(0xc0 + (tid) * 4)
-#define IMX8QXP_ADR_ADC_CMDH(cid)	(0x100 + (cid) * 8)
-#define IMX8QXP_ADR_ADC_CMDL(cid)	(0x104 + (cid) * 8)
+#define IMX8QXP_ADR_ADC_CMDL(cid)	(0x100 + (cid) * 8)
+#define IMX8QXP_ADR_ADC_CMDH(cid)	(0x104 + (cid) * 8)
 #define IMX8QXP_ADR_ADC_RESFIFO		0x300
 #define IMX8QXP_ADR_ADC_TST		0xffc
 
diff --git a/drivers/iio/addac/Kconfig b/drivers/iio/addac/Kconfig
index 877f912..397544f 100644
--- a/drivers/iio/addac/Kconfig
+++ b/drivers/iio/addac/Kconfig
@@ -24,6 +24,8 @@
 	depends on GPIOLIB && SPI
 	select REGMAP_SPI
 	select CRC8
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
 	help
 	  Say yes here to build support for Analog Devices AD74412R/AD74413R
 	  quad-channel software configurable input/output solution.
diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
index b72d39f..6bfe5d6 100644
--- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
@@ -190,8 +190,11 @@ int cros_ec_sensors_push_data(struct iio_dev *indio_dev,
 	/*
 	 * Ignore samples if the buffer is not set: it is needed if the ODR is
 	 * set but the buffer is not enabled yet.
+	 *
+	 * Note: iio_device_claim_buffer_mode() returns -EBUSY if the buffer
+	 * is not enabled.
 	 */
-	if (!iio_buffer_enabled(indio_dev))
+	if (iio_device_claim_buffer_mode(indio_dev) < 0)
 		return 0;
 
 	out = (s16 *)st->samples;
@@ -210,6 +213,7 @@ int cros_ec_sensors_push_data(struct iio_dev *indio_dev,
 	iio_push_to_buffers_with_timestamp(indio_dev, st->samples,
 					   timestamp + delta);
 
+	iio_device_release_buffer_mode(indio_dev);
 	return 0;
 }
 EXPORT_SYMBOL_GPL(cros_ec_sensors_push_data);
diff --git a/drivers/iio/dac/ad3552r.c b/drivers/iio/dac/ad3552r.c
index d5ea1a1..a492e8f 100644
--- a/drivers/iio/dac/ad3552r.c
+++ b/drivers/iio/dac/ad3552r.c
@@ -140,8 +140,8 @@ enum ad3552r_ch_vref_select {
 };
 
 enum ad3542r_id {
-	AD3542R_ID = 0x4008,
-	AD3552R_ID = 0x4009,
+	AD3542R_ID = 0x4009,
+	AD3552R_ID = 0x4008,
 };
 
 enum ad3552r_ch_output_range {
diff --git a/drivers/iio/frequency/admv1013.c b/drivers/iio/frequency/admv1013.c
index 6355c1f..9292307 100644
--- a/drivers/iio/frequency/admv1013.c
+++ b/drivers/iio/frequency/admv1013.c
@@ -351,9 +351,9 @@ static int admv1013_update_mixer_vgate(struct admv1013_state *st)
 	if (vcm < 0)
 		return vcm;
 
-	if (vcm < 1800000)
+	if (vcm <= 1800000)
 		mixer_vgate = (2389 * vcm / 1000000 + 8100) / 100;
-	else if (vcm > 1800000 && vcm < 2600000)
+	else if (vcm > 1800000 && vcm <= 2600000)
 		mixer_vgate = (2375 * vcm / 1000000 + 125) / 100;
 	else
 		return -EINVAL;
diff --git a/drivers/iio/imu/bno055/Kconfig b/drivers/iio/imu/bno055/Kconfig
index fa79b1a..83e53ac 100644
--- a/drivers/iio/imu/bno055/Kconfig
+++ b/drivers/iio/imu/bno055/Kconfig
@@ -2,6 +2,8 @@
 
 config BOSCH_BNO055
 	tristate
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
 
 config BOSCH_BNO055_SERIAL
 	tristate "Bosch BNO055 attached via UART"
diff --git a/drivers/iio/light/vcnl4000.c b/drivers/iio/light/vcnl4000.c
index 3a52b09..fdf763a 100644
--- a/drivers/iio/light/vcnl4000.c
+++ b/drivers/iio/light/vcnl4000.c
@@ -1513,7 +1513,6 @@ static int vcnl4040_write_event_config(struct iio_dev *indio_dev,
 
 out:
 	mutex_unlock(&data->vcnl4000_lock);
-	data->chip_spec->set_power_state(data, data->ps_int || data->als_int);
 
 	return ret;
 }
diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c
index 6089f3f..a2ef137 100644
--- a/drivers/iio/pressure/bmp280-core.c
+++ b/drivers/iio/pressure/bmp280-core.c
@@ -2179,7 +2179,7 @@ int bmp280_common_probe(struct device *dev,
 	 * however as it happens, the BMP085 shares the chip ID of BMP180
 	 * so we look for an IRQ if we have that.
 	 */
-	if (irq > 0 || (chip_id  == BMP180_CHIP_ID)) {
+	if (irq > 0 && (chip_id  == BMP180_CHIP_ID)) {
 		ret = bmp085_fetch_eoc_irq(dev, name, irq, data);
 		if (ret)
 			return ret;
diff --git a/drivers/iio/pressure/dps310.c b/drivers/iio/pressure/dps310.c
index b10dbf5..1ff091b 100644
--- a/drivers/iio/pressure/dps310.c
+++ b/drivers/iio/pressure/dps310.c
@@ -57,8 +57,8 @@
 #define  DPS310_RESET_MAGIC	0x09
 #define DPS310_COEF_BASE	0x10
 
-/* Make sure sleep time is <= 20ms for usleep_range */
-#define DPS310_POLL_SLEEP_US(t)		min(20000, (t) / 8)
+/* Make sure sleep time is <= 30ms for usleep_range */
+#define DPS310_POLL_SLEEP_US(t)		min(30000, (t) / 8)
 /* Silently handle error in rate value here */
 #define DPS310_POLL_TIMEOUT_US(rc)	((rc) <= 0 ? 1000000 : 1000000 / (rc))
 
@@ -402,8 +402,8 @@ static int dps310_reset_wait(struct dps310_data *data)
 	if (rc)
 		return rc;
 
-	/* Wait for device chip access: 2.5ms in specification */
-	usleep_range(2500, 12000);
+	/* Wait for device chip access: 15ms in specification */
+	usleep_range(15000, 55000);
 	return 0;
 }
 
diff --git a/drivers/iio/pressure/ms5611_core.c b/drivers/iio/pressure/ms5611_core.c
index 627497e..2fc706f 100644
--- a/drivers/iio/pressure/ms5611_core.c
+++ b/drivers/iio/pressure/ms5611_core.c
@@ -76,7 +76,7 @@ static bool ms5611_prom_is_valid(u16 *prom, size_t len)
 
 	crc = (crc >> 12) & 0x000F;
 
-	return crc_orig != 0x0000 && crc == crc_orig;
+	return crc == crc_orig;
 }
 
 static int ms5611_read_prom(struct iio_dev *indio_dev)
diff --git a/drivers/iio/proximity/irsd200.c b/drivers/iio/proximity/irsd200.c
index 5bd791b..bdff91f 100644
--- a/drivers/iio/proximity/irsd200.c
+++ b/drivers/iio/proximity/irsd200.c
@@ -759,14 +759,14 @@ static irqreturn_t irsd200_trigger_handler(int irq, void *pollf)
 {
 	struct iio_dev *indio_dev = ((struct iio_poll_func *)pollf)->indio_dev;
 	struct irsd200_data *data = iio_priv(indio_dev);
-	s16 buf = 0;
+	s64 buf[2] = {};
 	int ret;
 
-	ret = irsd200_read_data(data, &buf);
+	ret = irsd200_read_data(data, (s16 *)buf);
 	if (ret)
 		goto end;
 
-	iio_push_to_buffers_with_timestamp(indio_dev, &buf,
+	iio_push_to_buffers_with_timestamp(indio_dev, buf,
 					   iio_get_time_ns(indio_dev));
 
 end:
diff --git a/drivers/mcb/mcb-core.c b/drivers/mcb/mcb-core.c
index 978fdfc1..0cac5be 100644
--- a/drivers/mcb/mcb-core.c
+++ b/drivers/mcb/mcb-core.c
@@ -387,17 +387,13 @@ EXPORT_SYMBOL_NS_GPL(mcb_free_dev, MCB);
 
 static int __mcb_bus_add_devices(struct device *dev, void *data)
 {
-	struct mcb_device *mdev = to_mcb_device(dev);
 	int retval;
 
-	if (mdev->is_added)
-		return 0;
-
 	retval = device_attach(dev);
-	if (retval < 0)
+	if (retval < 0) {
 		dev_err(dev, "Error adding device (%d)\n", retval);
-
-	mdev->is_added = true;
+		return retval;
+	}
 
 	return 0;
 }
diff --git a/drivers/mcb/mcb-parse.c b/drivers/mcb/mcb-parse.c
index 2aef990..656b6b7 100644
--- a/drivers/mcb/mcb-parse.c
+++ b/drivers/mcb/mcb-parse.c
@@ -99,8 +99,6 @@ static int chameleon_parse_gdd(struct mcb_bus *bus,
 	mdev->mem.end = mdev->mem.start + size - 1;
 	mdev->mem.flags = IORESOURCE_MEM;
 
-	mdev->is_added = false;
-
 	ret = mcb_device_register(bus, mdev);
 	if (ret < 0)
 		goto err;
diff --git a/include/linux/mcb.h b/include/linux/mcb.h
index 1e58931..0b971b2 100644
--- a/include/linux/mcb.h
+++ b/include/linux/mcb.h
@@ -63,7 +63,6 @@ static inline struct mcb_bus *to_mcb_bus(struct device *dev)
 struct mcb_device {
 	struct device dev;
 	struct mcb_bus *bus;
-	bool is_added;
 	struct mcb_driver *driver;
 	u16 id;
 	int inst;