## @file
# FDF file of Clanton Peak CRB platform with 32-bit DXE
#
# This package provides QuarkNcSocId platform specific modules.
# Copyright (c) 2013 Intel Corporation.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# * Neither the name of Intel Corporation nor the names of its
# contributors may be used to endorse or promote products derived
# from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
##

################################################################################
#
# FD Section
# The [FD] Section is made up of the definition statements and a
# description of what goes into  the Flash Device Image.  Each FD section
# defines one flash "device" image.  A flash device image may be one of
# the following: Removable media bootable image (like a boot floppy
# image,) an Option ROM image (that would be "flashed" into an add-in
# card,) a System "Flash"  image (that would be burned into a system's
# flash) or an Update ("Capsule") image that will be used to update and
# existing system flash.
#
################################################################################
[FD.Quark]
BaseAddress   = 0xFF800000                   #The base address of the the FLASH Device.
Size          = 0x800000                     #The size in bytes of the the FLASH Device.
ErasePolarity = 1
BlockSize     = 0x1000
NumBlocks     = 0x800                        #The number of blocks for the FLASH Device.

#
#Flash location override based on actual flash map
#
SET gQuarkPlatformTokenSpaceGuid.PcdFlashAreaBaseAddress = 0xFF800000
SET gQuarkPlatformTokenSpaceGuid.PcdFlashAreaSize = 0x800000

SET gQuarkPlatformTokenSpaceGuid.PcdFlashNvStorageBase = 0xFFF30000
SET gQuarkPlatformTokenSpaceGuid.PcdFlashNvStorageSize = 0x20000
SET gQuarkPlatformTokenSpaceGuid.PcdFlashFvRecovery2Base = 0x80038400
SET gQuarkPlatformTokenSpaceGuid.PcdFlashFvRecovery2Size = 0x00007000
SET gQuarkPlatformTokenSpaceGuid.PcdFlashQNCMicrocodeSize = 0x00004000
SET gQuarkPlatformTokenSpaceGuid.PcdFlashFvMainBase = 0xFFD00400
SET gQuarkPlatformTokenSpaceGuid.PcdFlashFvMainSize = 0x00120000

################################################################################
#
# Following are lists of FD Region layout which correspond to the locations of different
# images within the flash device.
#
# Regions must be defined in ascending order and may not overlap.
#
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
# the pipe "|" character, followed by the size of the region, also in hex with the leading
# "0x" characters. Like:
# Offset|Size
# PcdOffsetCName|PcdSizeCName
# RegionType <FV, DATA, or FILE>
#
################################################################################

########################################################
# Quark EDKII Payload Image.
########################################################
0x00400400|0x000F0000
gQuarkPlatformTokenSpaceGuid.PcdFlashFvPayloadBase|gQuarkPlatformTokenSpaceGuid.PcdFlashFvPayloadSize
FV = EDKII_PAYLOAD_IMAGE

########################################################
# Quark EDKII Stage2 Image (Compressed)
########################################################
0x00500400|0x00120000
gQuarkPlatformTokenSpaceGuid.PcdFlashFvMainBase|gQuarkPlatformTokenSpaceGuid.PcdFlashFvMainSize
FV = EDKII_BOOT_STAGE2_COMPACT

#########################################################
# Quark EDKII Stage1 Backup Image
# Quark EDKII Stage1 contains: Stage1 FV + Remote Management Unit Binary
#########################################################
0x00680400|0x0003f000
FV = EDKII_BOOT_STAGE1_IMAGE2

#########################################################
# Quark EDKII Stage1 Primary Image
# Quark EDKII Stage1 contains: Stage1 FV + Remote Management Unit Binary
#########################################################
0x006C0400|0x0003f000
FV = EDKII_BOOT_STAGE1_IMAGE1

#########################################################
# Quark Remote Management Unit Binary
#########################################################
0x00700000|0x00008000
!ifdef QUARK2
  FILE = QuarkSocPkg/QuarkNorthCluster/Binary/Quark2Microcode/RMU.bin
!else
  FILE = QuarkSocPkg/QuarkNorthCluster/Binary/QuarkMicrocode/RMU.bin
!endif

#########################################################
# Master Flash Header Data.
#########################################################
0x00708000|0x00001000
DATA = {
  ## This is the MFH_HEADER struct.
  # MFH_HEADER.QuarkMFHIdentifier.
  0x48, 0x46, 0x4D, 0x5F,
  # MFH_HEADER.Version, MFH_HEADER.RsvdFlags & MFH_HEADER.NextHeaderBlock.
  0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  # MFH_HEADER.FlashItemCount UINT32 LSB - MSB.
  0x06, 0x00, 0x00, 0x00,
  # MFH_HEADER.BootPriorityListCount UINT32 LSB - MSB.
  0x03, 0x00, 0x00, 0x00,
  ## This is the BootPriorityList.
  # 1st                 , 2nd                   , 3rd.
  0x01, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  ## This is Flash Item [0] desc. 4xUINT32 LSB - MSB.
  # Type                , FlashAddress          , LengthBytes,          ,Reserved.
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF9, 0xFF, 0x00, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00,
  ## This is Flash Item [1] desc. 4xUINT32 LSB - MSB.
  # Type                , FlashAddress          , LengthBytes,          ,Reserved.
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xEC, 0xFF, 0x00, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00,
  ## This is Flash Item [2] desc. 4xUINT32 LSB - MSB.
  # Type                , FlashAddress          , LengthBytes,          ,Reserved.
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE8, 0xFF, 0x00, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00,
  ## This is Flash Item [3] desc. 4xUINT32 LSB - MSB.
  # Type                , FlashAddress          , LengthBytes,          ,Reserved.
  0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0xD0, 0xFF, 0x00, 0x00, 0x12, 0x00, 0x00, 0x00, 0x00, 0x00,
  ## This is Flash Item [4] desc. 4xUINT32 LSB - MSB.
  # Type                , FlashAddress          , LengthBytes,          ,Reserved.
  0x0B, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0xFF, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00,
  ## This is Flash Item [5] desc. 4xUINT32 LSB - MSB.
  # Type                , FlashAddress          , LengthBytes,          ,Reserved.
  0x19, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x99, 0x02, 0x00, 0x01
}

#########################################################
# PlatformData Binary, default for standalone is none built-in so user selects.
#########################################################
#0x00710000|0x00001000
#FILE = QuarkPlatformPkg/Binary/PlatformData/svp-platform-data.bin
#FILE = QuarkPlatformPkg/Binary/PlatformData/kipsbay-platform-data.bin
#FILE = QuarkPlatformPkg/Binary/PlatformData/crosshill-platform-data.bin
#FILE = QuarkPlatformPkg/Binary/PlatformData/clantonhill-platform-data.bin
#FILE = QuarkPlatformPkg/Binary/PlatformData/galileo-platform-data.bin
#FILE = QuarkPlatformPkg/Binary/PlatformData/galileo-gen2-platform-data.bin

#############################################################################
# Quark EDKII NVRAM Area
# Quark EDKII NVRAM Area contains: Variable + FTW Working + FTW Spare
#############################################################################
0x00730000|0x0000E000
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize
#NV_VARIABLE_STORE
DATA = {
  ## This is the EFI_FIRMWARE_VOLUME_HEADER
  # ZeroVector []
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  # FileSystemGuid: gEfiSystemNvDataFvGuid         =
  #  { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}
  0x8D, 0x2B, 0xF1, 0xFF, 0x96, 0x76, 0x8B, 0x4C,
  0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50,
  # FvLength: 0x20000
  0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00,
  #Signature "_FVH"       #Attributes
  0x5f, 0x46, 0x56, 0x48, 0xff, 0xfe, 0x04, 0x00,
  #HeaderLength #CheckSum #ExtHeaderOffset #Reserved #Revision
  0x48, 0x00, 0x19, 0xF9, 0x00, 0x00, 0x00, 0x02,
  #Blockmap[0]: 32 Blocks * 0x1000 Bytes / Block
  0x20, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00,
  #Blockmap[1]: End
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  ## This is the VARIABLE_STORE_HEADER
  !ifdef SECURE_BOOT
    # Signature: gEfiAuthenticatedVariableGuid = { 0xaaf32c78, 0x947b, 0x439a, { 0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92 } }
    0x78, 0x2c, 0xf3, 0xaa, 0x7b, 0x94, 0x9a, 0x43,
    0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92,
  !else
    #  Signature: gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}
    0x16, 0x36, 0xcf, 0xdd, 0x75, 0x32, 0x64, 0x41,
    0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d,
  !endif
  #Size: 0x0E000 (gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize) - 0x48 (size of EFI_FIRMWARE_VOLUME_HEADER) = 0x0DFB8
  # This can speed up the Variable Dispatch a bit.
  0xB8, 0xDF, 0x00, 0x00,
  #FORMATTED: 0x5A #HEALTHY: 0xFE #Reserved: UINT16 #Reserved1: UINT32
  0x5A, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
}

0x0073E000|0x00002000
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize
#NV_FTW_WORKING
DATA = {
  # EFI_FAULT_TOLERANT_WORKING_BLOCK_HEADER->Signature = gEfiSystemNvDataFvGuid         =
  #  { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}
  0x8D, 0x2B, 0xF1, 0xFF, 0x96, 0x76, 0x8B, 0x4C,
  0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50,
  # Crc:UINT32            #WorkingBlockValid:1, WorkingBlockInvalid:1, Reserved
  0x77, 0x13, 0x9B, 0xD7, 0xFE, 0xFF, 0xFF, 0xFF,
  # WriteQueueSize: UINT64 #Size: 0x2000 - 0x20 (FTW_WORKING_HEADER) = 0x1FE0
  0xE0, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
}

0x00740000|0x00010000
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize
#NV_FTW_SPARE

#########################################################################################
# Quark EDKII Recovery Primary Image
# Quark EDKII Recovery contains: Recovery Stage1 FV + Recovery Stage2 FV + Remote Management Unit Binary
#########################################################################################
0x00790400|0x00038000
FV = EDKII_RECOVERY_STAGE1_IMAGE1

0x007C8400|0x00007000
FV = EDKII_RECOVERY_STAGE2_IMAGE1

#######################
# Quark BootRom Image
#######################
0x007E0000|0x00020000
FV = EDKII_BOOTROM_OVERRIDE

################################################################################
#
# FV Section
#
# [FV] section is used to define what components or modules are placed within a flash
# device file.  This section also defines order the components and modules are positioned
# within the image.  The [FV] section consists of define statements, set statements and
# module statements.
#
################################################################################
[FV.EDKII_BOOTROM_OVERRIDE]
BlockSize          = 0x1000
FvAlignment        = 16         #FV alignment and FV attributes setting.
ERASE_POLARITY     = 1
MEMORY_MAPPED      = TRUE
STICKY_WRITE       = TRUE
LOCK_CAP           = TRUE
LOCK_STATUS        = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP  = TRUE
WRITE_STATUS       = TRUE
WRITE_LOCK_CAP     = TRUE
WRITE_LOCK_STATUS  = TRUE
READ_DISABLED_CAP  = TRUE
READ_ENABLED_CAP   = TRUE
READ_STATUS        = TRUE
READ_LOCK_CAP      = TRUE
READ_LOCK_STATUS   = TRUE
FvNameGuid         = 18D6D9F4-2EEF-4913-AEE6-BE61C6DA6CC8

################################################################################
#
# The INF statements point to EDK component and EDK II module INF files, which will be placed into this FV image.
# Parsing tools will scan the INF file to determine the type of component or module.
# The component or module type is used to reference the standard rules
# defined elsewhere in the FDF file.
#
# The format for INF statements is:
# INF $(PathAndInfFileName)
#
################################################################################

  ##
  #  Fixup area for function pointers to NOP ROM routines.
  #  This File must be the first in the FV.
  ##
FILE FREEFORM = 5331914A-52A4-472c-B4BD-E223E48C24B0 {
    SECTION RAW = QuarkPlatformPkg/Binary/SIZE_8KB.bin
  }

  ##
  #  SEC Phase modules
  ##
INF  QuarkPlatformPkg/Cpu/Sec/ResetVector/QuarkResetVector.inf
INF  MdeModulePkg/Core/Pei/PeiMain.inf

################################################################################
#
# FV Section
#
# [FV] section is used to define what components or modules are placed within a flash
# device file.  This section also defines order the components and modules are positioned
# within the image.  The [FV] section consists of define statements, set statements and
# module statements.
#
################################################################################
[FV.EDKII_RECOVERY_STAGE1_IMAGE1]
BlockSize          = 0x1000
FvBaseAddress      = 0x80000400
FvForceRebase      = TRUE
FvAlignment        = 16         #FV alignment and FV attributes setting.
ERASE_POLARITY     = 1
MEMORY_MAPPED      = TRUE
STICKY_WRITE       = TRUE
LOCK_CAP           = TRUE
LOCK_STATUS        = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP  = TRUE
WRITE_STATUS       = TRUE
WRITE_LOCK_CAP     = TRUE
WRITE_LOCK_STATUS  = TRUE
READ_DISABLED_CAP  = TRUE
READ_ENABLED_CAP   = TRUE
READ_STATUS        = TRUE
READ_LOCK_CAP      = TRUE
READ_LOCK_STATUS   = TRUE
FvNameGuid         = 18D6D9F4-2EEF-4913-AEE6-BE61C6DA6CC8

################################################################################
#
# The INF statements point to EDK component and EDK II module INF files, which will be placed into this FV image.
# Parsing tools will scan the INF file to determine the type of component or module.
# The component or module type is used to reference the standard rules
# defined elsewhere in the FDF file.
#
# The format for INF statements is:
# INF $(PathAndInfFileName)
#
################################################################################
  ##
  #  PEI Apriori file example, more PEIM module added later.
  ##
APRIORI PEI {
  INF  MdeModulePkg/Universal/PCD/Pei/Pcd.inf
  # PlatformConfigPei should be immediately after Pcd driver.
  INF  QuarkPlatformPkg/Platform/Pei/PlatformConfig/PlatformConfigPei.inf
  INF  MdeModulePkg/Universal/PcatSingleSegmentPciCfg2Pei/PcatSingleSegmentPciCfg2Pei.inf
  INF  MdeModulePkg/Universal/ReportStatusCodeRouter/Pei/ReportStatusCodeRouterPei.inf
  INF  MdeModulePkg/Universal/StatusCodeHandler/Pei/StatusCodeHandlerPei.inf
  INF  QuarkPlatformPkg/Platform/Pei/PlatformInfo/PlatformInfo.inf
  }

  ##
  #  PEI Phase RAW Data files.
  ##
FILE FREEFORM = PCD(gEfiQuarkNcSocIdTokenSpaceGuid.PcdQuarkMicrocodeFile) {
!ifdef QUARK2
    SECTION RAW = QuarkSocPkg/QuarkNorthCluster/Binary/Quark2Microcode/RMU.bin
!else
    SECTION RAW = QuarkSocPkg/QuarkNorthCluster/Binary/QuarkMicrocode/RMU.bin
!endif
  }

  ##
  #  Platform data files see QuarkPlatformPkg/Include/Guid/PlatformDataFileNameGuids.h
  #  for steps to add new platform.
  ##
FILE FREEFORM = 0A975562-DF47-4dc3-8AB0-3BA2C3522302 {
    SECTION RAW = QuarkPlatformPkg/Binary/PlatformData/svp-platform-data.bin
  }
FILE FREEFORM = 956EDAD3-8440-45cb-89AC-D1930C004E34 {
    SECTION RAW = QuarkPlatformPkg/Binary/PlatformData/kipsbay-platform-data.bin
  }
FILE FREEFORM = 095B3C16-6D67-4c85-B528-339D9FF6222C {
    SECTION RAW = QuarkPlatformPkg/Binary/PlatformData/crosshill-platform-data.bin
  }
FILE FREEFORM = EE84C5E7-9412-42cc-B755-A915A7B68536 {
    SECTION RAW = QuarkPlatformPkg/Binary/PlatformData/clantonhill-platform-data.bin
  }
FILE FREEFORM = E4AD87C8-D20E-40ce-97F5-9756FD0E81D4 {
    SECTION RAW = QuarkPlatformPkg/Binary/PlatformData/galileo-platform-data.bin
  }
FILE FREEFORM = 23B3C10D-46E3-4a78-8AAA-217B6A39EF04 {
    SECTION RAW = QuarkPlatformPkg/Binary/PlatformData/galileo-gen2-platform-data.bin
  }

  ##
  #  PEI Phase modules
  ##
INF  IA32FamilyCpuBasePkg/SecCore/SecCore.inf
INF  MdeModulePkg/Core/Pei/PeiMain.inf
INF  RuleOverride = NORELOC  MdeModulePkg/Universal/PCD/Pei/Pcd.inf
# PlatformConfigPei should be immediately after Pcd driver.
INF  QuarkPlatformPkg/Platform/Pei/PlatformConfig/PlatformConfigPei.inf
INF  RuleOverride = NORELOC  MdeModulePkg/Universal/ReportStatusCodeRouter/Pei/ReportStatusCodeRouterPei.inf
INF  RuleOverride = NORELOC  MdeModulePkg/Universal/StatusCodeHandler/Pei/StatusCodeHandlerPei.inf
!ifdef SECURE_BOOT
  INF  RuleOverride = NORELOC  SecurityPkg/VariableAuthenticated/Pei/VariablePei.inf
!else
  INF  RuleOverride = NORELOC  MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
!endif
INF  RuleOverride = NORELOC  IA32FamilyCpuBasePkg/CpuPei/CpuPei.inf
INF  RuleOverride = NORELOC  MdeModulePkg/Universal/CapsulePei/CapsulePei.inf
INF  RuleOverride = NORELOC  QuarkSocPkg/QuarkNorthCluster/MemoryInit/Pei/MemoryInitPei.inf
INF  RuleOverride = NORELOC  QuarkSocPkg/QuarkNorthCluster/Smm/Pei/SmmAccessPei/SmmAccessPei.inf
INF  QuarkPlatformPkg/Platform/Pei/PlatformInit/PlatformEarlyInit.inf
INF  QuarkPlatformPkg/Platform/Pei/PlatformInfo/PlatformInfo.inf
INF  MdeModulePkg/Universal/PcatSingleSegmentPciCfg2Pei/PcatSingleSegmentPciCfg2Pei.inf
INF  QuarkPlatformPkg/Override/MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf

################################################################################
#
# FV Section
#
# [FV] section is used to define what components or modules are placed within a flash
# device file.  This section also defines order the components and modules are positioned
# within the image.  The [FV] section consists of define statements, set statements and
# module statements.
#
################################################################################
[FV.EDKII_RECOVERY_STAGE2_IMAGE1]
BlockSize          = 0x1000
FvBaseAddress      = 0x80030000
FvForceRebase      = TRUE
FvAlignment        = 16         #FV alignment and FV attributes setting.
ERASE_POLARITY     = 1
MEMORY_MAPPED      = TRUE
STICKY_WRITE       = TRUE
LOCK_CAP           = TRUE
LOCK_STATUS        = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP  = TRUE
WRITE_STATUS       = TRUE
WRITE_LOCK_CAP     = TRUE
WRITE_LOCK_STATUS  = TRUE
READ_DISABLED_CAP  = TRUE
READ_ENABLED_CAP   = TRUE
READ_STATUS        = TRUE
READ_LOCK_CAP      = TRUE
READ_LOCK_STATUS   = TRUE

!if $(CFG_SOURCE_DEBUG) == TRUE
 INF  QuarkPlatformPkg/Override/UefiCpuPkg/Universal/Acpi/S3Resume2Pei/S3Resume2Pei.inf
!endif
FILE FV_IMAGE = 1E9D7604-EF45-46a0-BD8A-71AC78C17AC1 {
       SECTION PEI_DEPEX_EXP = {gEfiPeiMemoryDiscoveredPpiGuid AND gEfiPeiBootInRecoveryModePpiGuid}
       SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF {
          SECTION FV_IMAGE = FVRECOVERY_COMPONENTS
       }
     }

################################################################################
#
# FV Section
#
# [FV] section is used to define what components or modules are placed within a flash
# device file.  This section also defines order the components and modules are positioned
# within the image.  The [FV] section consists of define statements, set statements and
# module statements.
#
################################################################################
[FV.FVRECOVERY_COMPONENTS]
BlockSize          = 0x1000
FvAlignment        = 16         #FV alignment and FV attributes setting.
ERASE_POLARITY     = 1
MEMORY_MAPPED      = TRUE
STICKY_WRITE       = TRUE
LOCK_CAP           = TRUE
LOCK_STATUS        = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP  = TRUE
WRITE_STATUS       = TRUE
WRITE_LOCK_CAP     = TRUE
WRITE_LOCK_STATUS  = TRUE
READ_DISABLED_CAP  = TRUE
READ_ENABLED_CAP   = TRUE
READ_STATUS        = TRUE
READ_LOCK_CAP      = TRUE
READ_LOCK_STATUS   = TRUE
INF  QuarkSocPkg/QuarkSouthCluster/Usb/Common/Pei/UsbPei.inf
INF  MdeModulePkg/Bus/Pci/EhciPei/EhciPei.inf
INF  QuarkSocPkg/QuarkSouthCluster/Usb/Ohci/Pei/OhciPei.inf
INF  MdeModulePkg/Bus/Usb/UsbBusPei/UsbBusPei.inf
INF  MdeModulePkg/Bus/Usb/UsbBotPei/UsbBotPei.inf
INF  FatPkg/FatPei/FatPei.inf
INF  MdeModulePkg/Universal/Disk/CdExpressPei/CdExpressPei.inf

################################################################################
#
# FV Section
#
# [FV] section is used to define what components or modules are placed within a flash
# device file.  This section also defines order the components and modules are positioned
# within the image.  The [FV] section consists of define statements, set statements and
# module statements.
#
################################################################################
[FV.EDKII_BOOT_STAGE1_IMAGE1]
BlockSize          = 0x1000
FvBaseAddress      = 0x80000400
FvForceRebase      = TRUE
FvAlignment        = 16         #FV alignment and FV attributes setting.
ERASE_POLARITY     = 1
MEMORY_MAPPED      = TRUE
STICKY_WRITE       = TRUE
LOCK_CAP           = TRUE
LOCK_STATUS        = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP  = TRUE
WRITE_STATUS       = TRUE
WRITE_LOCK_CAP     = TRUE
WRITE_LOCK_STATUS  = TRUE
READ_DISABLED_CAP  = TRUE
READ_ENABLED_CAP   = TRUE
READ_STATUS        = TRUE
READ_LOCK_CAP      = TRUE
READ_LOCK_STATUS   = TRUE
FvNameGuid         = 18D6D9F4-2EEF-4913-AEE6-BE61C6DA6CC8

################################################################################
#
# The INF statements point to EDK component and EDK II module INF files, which will be placed into this FV image.
# Parsing tools will scan the INF file to determine the type of component or module.
# The component or module type is used to reference the standard rules
# defined elsewhere in the FDF file.
#
# The format for INF statements is:
# INF $(PathAndInfFileName)
#
################################################################################
  ##
  #  PEI Apriori file example, more PEIM module added later.
  ##
APRIORI PEI {
  INF  MdeModulePkg/Universal/PCD/Pei/Pcd.inf
  # PlatformConfigPei should be immediately after Pcd driver.
  INF  QuarkPlatformPkg/Platform/Pei/PlatformConfig/PlatformConfigPei.inf
  INF  MdeModulePkg/Universal/PcatSingleSegmentPciCfg2Pei/PcatSingleSegmentPciCfg2Pei.inf
  INF  MdeModulePkg/Universal/ReportStatusCodeRouter/Pei/ReportStatusCodeRouterPei.inf
  INF  MdeModulePkg/Universal/StatusCodeHandler/Pei/StatusCodeHandlerPei.inf
  INF  QuarkPlatformPkg/Platform/Pei/PlatformInfo/PlatformInfo.inf
  }

  ##
  #  PEI Phase RAW Data files.
  ##
FILE FREEFORM = PCD(gEfiQuarkNcSocIdTokenSpaceGuid.PcdQuarkMicrocodeFile) {
!ifdef QUARK2
    SECTION RAW = QuarkSocPkg/QuarkNorthCluster/Binary/Quark2Microcode/RMU.bin
!else
    SECTION RAW = QuarkSocPkg/QuarkNorthCluster/Binary/QuarkMicrocode/RMU.bin
!endif
  }

  ##
  #  Platform data files see QuarkPlatformPkg/Include/Guid/PlatformDataFileNameGuids.h
  #  for steps to add new platform.
  ##
FILE FREEFORM = 0A975562-DF47-4dc3-8AB0-3BA2C3522302 {
    SECTION RAW = QuarkPlatformPkg/Binary/PlatformData/svp-platform-data.bin
  }
FILE FREEFORM = 956EDAD3-8440-45cb-89AC-D1930C004E34 {
    SECTION RAW = QuarkPlatformPkg/Binary/PlatformData/kipsbay-platform-data.bin
  }
FILE FREEFORM = 095B3C16-6D67-4c85-B528-339D9FF6222C {
    SECTION RAW = QuarkPlatformPkg/Binary/PlatformData/crosshill-platform-data.bin
  }
FILE FREEFORM = EE84C5E7-9412-42cc-B755-A915A7B68536 {
    SECTION RAW = QuarkPlatformPkg/Binary/PlatformData/clantonhill-platform-data.bin
  }
FILE FREEFORM = E4AD87C8-D20E-40ce-97F5-9756FD0E81D4 {
    SECTION RAW = QuarkPlatformPkg/Binary/PlatformData/galileo-platform-data.bin
  }
FILE FREEFORM = 23B3C10D-46E3-4a78-8AAA-217B6A39EF04 {
    SECTION RAW = QuarkPlatformPkg/Binary/PlatformData/galileo-gen2-platform-data.bin
  }


  ##
  #  PEI Phase modules
  ##
INF  IA32FamilyCpuBasePkg/SecCore/SecCore.inf
INF  MdeModulePkg/Core/Pei/PeiMain.inf
INF  RuleOverride = NORELOC  MdeModulePkg/Universal/PCD/Pei/Pcd.inf
# PlatformConfigPei should be immediately after Pcd driver.
INF  QuarkPlatformPkg/Platform/Pei/PlatformConfig/PlatformConfigPei.inf
INF  RuleOverride = NORELOC  MdeModulePkg/Universal/ReportStatusCodeRouter/Pei/ReportStatusCodeRouterPei.inf
INF  RuleOverride = NORELOC  MdeModulePkg/Universal/StatusCodeHandler/Pei/StatusCodeHandlerPei.inf
!ifdef SECURE_BOOT
  INF  RuleOverride = NORELOC  SecurityPkg/VariableAuthenticated/Pei/VariablePei.inf
!else
  INF  RuleOverride = NORELOC  MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
!endif
INF  RuleOverride = NORELOC  IA32FamilyCpuBasePkg/CpuPei/CpuPei.inf
INF  RuleOverride = NORELOC  MdeModulePkg/Universal/CapsulePei/CapsulePei.inf
INF  RuleOverride = NORELOC  QuarkSocPkg/QuarkNorthCluster/MemoryInit/Pei/MemoryInitPei.inf
INF  RuleOverride = NORELOC  QuarkSocPkg/QuarkNorthCluster/Smm/Pei/SmmAccessPei/SmmAccessPei.inf
INF  RuleOverride = NORELOC  QuarkSocPkg/QuarkNorthCluster/Smm/Pei/SmmControlPei/SmmControlPei.inf
INF  QuarkPlatformPkg/Platform/Pei/PlatformInit/PlatformEarlyInit.inf
INF  QuarkPlatformPkg/Platform/Pei/PlatformInfo/PlatformInfo.inf
INF  MdeModulePkg/Universal/PcatSingleSegmentPciCfg2Pei/PcatSingleSegmentPciCfg2Pei.inf
INF  QuarkPlatformPkg/Override/MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
INF  IA32FamilyCpuBasePkg/PiSmmCommunication/PiSmmCommunicationPei.inf
!if $(CFG_SOURCE_DEBUG) == TRUE
# nothing
!else
 INF  QuarkPlatformPkg/Override/UefiCpuPkg/Universal/Acpi/S3Resume2Pei/S3Resume2Pei.inf
!endif

################################################################################
#
# FV Section
#
# [FV] section is used to define what components or modules are placed within a flash
# device file.  This section also defines order the components and modules are positioned
# within the image.  The [FV] section consists of define statements, set statements and
# module statements.
#
################################################################################
[FV.EDKII_BOOT_STAGE1_IMAGE2]
BlockSize          = 0x1000
FvBaseAddress      = 0x80000400
FvForceRebase      = TRUE
FvAlignment        = 16         #FV alignment and FV attributes setting.
ERASE_POLARITY     = 1
MEMORY_MAPPED      = TRUE
STICKY_WRITE       = TRUE
LOCK_CAP           = TRUE
LOCK_STATUS        = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP  = TRUE
WRITE_STATUS       = TRUE
WRITE_LOCK_CAP     = TRUE
WRITE_LOCK_STATUS  = TRUE
READ_DISABLED_CAP  = TRUE
READ_ENABLED_CAP   = TRUE
READ_STATUS        = TRUE
READ_LOCK_CAP      = TRUE
READ_LOCK_STATUS   = TRUE
FvNameGuid         = 18D6D9F4-2EEF-4913-AEE6-BE61C6DA6CC8

################################################################################
#
# The INF statements point to EDK component and EDK II module INF files, which will be placed into this FV image.
# Parsing tools will scan the INF file to determine the type of component or module.
# The component or module type is used to reference the standard rules
# defined elsewhere in the FDF file.
#
# The format for INF statements is:
# INF $(PathAndInfFileName)
#
################################################################################
  ##
  #  PEI Apriori file example, more PEIM module added later.
  ##
APRIORI PEI {
  INF  MdeModulePkg/Universal/PCD/Pei/Pcd.inf
  # PlatformConfigPei should be immediately after Pcd driver.
  INF  QuarkPlatformPkg/Platform/Pei/PlatformConfig/PlatformConfigPei.inf
  INF  MdeModulePkg/Universal/PcatSingleSegmentPciCfg2Pei/PcatSingleSegmentPciCfg2Pei.inf
  INF  MdeModulePkg/Universal/ReportStatusCodeRouter/Pei/ReportStatusCodeRouterPei.inf
  INF  MdeModulePkg/Universal/StatusCodeHandler/Pei/StatusCodeHandlerPei.inf
  INF  QuarkPlatformPkg/Platform/Pei/PlatformInfo/PlatformInfo.inf
  }

  ##
  #  PEI Phase RAW Data files.
  ##
FILE FREEFORM = PCD(gEfiQuarkNcSocIdTokenSpaceGuid.PcdQuarkMicrocodeFile) {
!ifdef QUARK2
    SECTION RAW = QuarkSocPkg/QuarkNorthCluster/Binary/Quark2Microcode/RMU.bin
!else
    SECTION RAW = QuarkSocPkg/QuarkNorthCluster/Binary/QuarkMicrocode/RMU.bin
!endif
  }

  ##
  #  Platform data files see QuarkPlatformPkg/Include/Guid/PlatformDataFileNameGuids.h
  #  for steps to add new platform.
  ##
FILE FREEFORM = 0A975562-DF47-4dc3-8AB0-3BA2C3522302 {
    SECTION RAW = QuarkPlatformPkg/Binary/PlatformData/svp-platform-data.bin
  }
FILE FREEFORM = 956EDAD3-8440-45cb-89AC-D1930C004E34 {
    SECTION RAW = QuarkPlatformPkg/Binary/PlatformData/kipsbay-platform-data.bin
  }
FILE FREEFORM = 095B3C16-6D67-4c85-B528-339D9FF6222C {
    SECTION RAW = QuarkPlatformPkg/Binary/PlatformData/crosshill-platform-data.bin
  }
FILE FREEFORM = EE84C5E7-9412-42cc-B755-A915A7B68536 {
    SECTION RAW = QuarkPlatformPkg/Binary/PlatformData/clantonhill-platform-data.bin
  }
FILE FREEFORM = E4AD87C8-D20E-40ce-97F5-9756FD0E81D4 {
    SECTION RAW = QuarkPlatformPkg/Binary/PlatformData/galileo-platform-data.bin
  }
FILE FREEFORM = 23B3C10D-46E3-4a78-8AAA-217B6A39EF04 {
    SECTION RAW = QuarkPlatformPkg/Binary/PlatformData/galileo-gen2-platform-data.bin
  }


  ##
  #  PEI Phase modules
  ##
INF  IA32FamilyCpuBasePkg/SecCore/SecCore.inf
INF  MdeModulePkg/Core/Pei/PeiMain.inf
INF  RuleOverride = NORELOC  MdeModulePkg/Universal/PCD/Pei/Pcd.inf
# PlatformConfigPei should be immediately after Pcd driver.
INF  QuarkPlatformPkg/Platform/Pei/PlatformConfig/PlatformConfigPei.inf
INF  RuleOverride = NORELOC  MdeModulePkg/Universal/ReportStatusCodeRouter/Pei/ReportStatusCodeRouterPei.inf
INF  RuleOverride = NORELOC  MdeModulePkg/Universal/StatusCodeHandler/Pei/StatusCodeHandlerPei.inf
!ifdef SECURE_BOOT
  INF  RuleOverride = NORELOC  SecurityPkg/VariableAuthenticated/Pei/VariablePei.inf
!else
  INF  RuleOverride = NORELOC  MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
!endif
INF  RuleOverride = NORELOC  IA32FamilyCpuBasePkg/CpuPei/CpuPei.inf
INF  RuleOverride = NORELOC  MdeModulePkg/Universal/CapsulePei/CapsulePei.inf
INF  RuleOverride = NORELOC  QuarkSocPkg/QuarkNorthCluster/MemoryInit/Pei/MemoryInitPei.inf
INF  RuleOverride = NORELOC  QuarkSocPkg/QuarkNorthCluster/Smm/Pei/SmmAccessPei/SmmAccessPei.inf
INF  RuleOverride = NORELOC  QuarkSocPkg/QuarkNorthCluster/Smm/Pei/SmmControlPei/SmmControlPei.inf
INF  QuarkPlatformPkg/Platform/Pei/PlatformInit/PlatformEarlyInit.inf
INF  QuarkPlatformPkg/Platform/Pei/PlatformInfo/PlatformInfo.inf
INF  MdeModulePkg/Universal/PcatSingleSegmentPciCfg2Pei/PcatSingleSegmentPciCfg2Pei.inf
INF  QuarkPlatformPkg/Override/MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
INF  IA32FamilyCpuBasePkg/PiSmmCommunication/PiSmmCommunicationPei.inf
!if $(CFG_SOURCE_DEBUG) == TRUE
# nothing
!else
 INF  QuarkPlatformPkg/Override/UefiCpuPkg/Universal/Acpi/S3Resume2Pei/S3Resume2Pei.inf
!endif

################################################################################
#
# FV Section
#
# [FV] section is used to define what components or modules are placed within a flash
# device file.  This section also defines order the components and modules are positioned
# within the image.  The [FV] section consists of define statements, set statements and
# module statements.
#
################################################################################
[FV.EDKII_BOOT_STAGE2]
BlockSize          = 0x1000
FvAlignment        = 16
ERASE_POLARITY     = 1
MEMORY_MAPPED      = TRUE
STICKY_WRITE       = TRUE
LOCK_CAP           = TRUE
LOCK_STATUS        = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP  = TRUE
WRITE_STATUS       = TRUE
WRITE_LOCK_CAP     = TRUE
WRITE_LOCK_STATUS  = TRUE
READ_DISABLED_CAP  = TRUE
READ_ENABLED_CAP   = TRUE
READ_STATUS        = TRUE
READ_LOCK_CAP      = TRUE
READ_LOCK_STATUS   = TRUE
FvNameGuid         = 30D9ED01-38D2-418a-90D5-C561750BF80F

  ##
  #  DXE Phase modules
  ##
INF  MdeModulePkg/Core/Dxe/DxeMain.inf
INF  MdeModulePkg/Universal/PCD/Dxe/Pcd.inf

#
# Early SoC / Platform modules. I2C must be loaded before platform init.
#
INF  QuarkSocPkg/QuarkSouthCluster/I2C/Dxe/I2CDxe.inf
INF  QuarkPlatformPkg/Platform/Dxe/PlatformInit/PlatformInitDxe.inf

#
# EDK Core modules.
#

INF  IntelFrameworkModulePkg/Universal/CpuIoDxe/CpuIoDxe.inf
INF  UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.inf
INF  MdeModulePkg/Universal/ReportStatusCodeRouter/RuntimeDxe/ReportStatusCodeRouterRuntimeDxe.inf
INF  MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHandlerRuntimeDxe.inf
INF  MdeModulePkg/Universal/ReportStatusCodeRouter/Smm/ReportStatusCodeRouterSmm.inf
INF  MdeModulePkg/Universal/StatusCodeHandler/Smm/StatusCodeHandlerSmm.inf
INF  IntelFrameworkModulePkg/Universal/SectionExtractionDxe/SectionExtractionDxe.inf

INF  MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
INF  IA32FamilyCpuBasePkg/CpuArchDxe/CpuArchDxe.inf
INF  IA32FamilyCpuBasePkg/CpuMpDxe/CpuMpDxe.inf
INF  MdeModulePkg/Universal/Metronome/Metronome.inf
INF  MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
INF  MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
INF  QuarkPlatformPkg/Override/MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteSmm.inf
!ifdef SECURE_BOOT
INF  SecurityPkg/VariableAuthenticated/RuntimeDxe/VariableSmmRuntimeDxe.inf
INF  SecurityPkg/VariableAuthenticated/RuntimeDxe/VariableSmm.inf
#INF  SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigDxe.inf
!else
INF  MdeModulePkg/Universal/Variable/RuntimeDxe/VariableSmmRuntimeDxe.inf
INF  QuarkPlatformPkg/Override/MdeModulePkg/Universal/Variable/RuntimeDxe/VariableSmm.inf
!endif
INF  MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
INF  MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf  
INF  MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe.inf
INF  QuarkPlatformPkg/Override/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf
INF  MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
INF  IntelFrameworkModulePkg/Universal/DataHubDxe/DataHubDxe.inf
INF  IntelFrameworkModulePkg/Universal/DataHubStdErrDxe/DataHubStdErrDxe.inf
INF  MdeModulePkg/Universal/MemoryTest/NullMemoryTestDxe/NullMemoryTestDxe.inf

#
# Platform
#
INF  QuarkPlatformPkg/Bds/BootManagerMenuApp/BootManagerMenuApp.inf
INF  QuarkPlatformPkg/Bds/BdsDxe/BdsDxe.inf

INF  QuarkPlatformPkg/Pci/Dxe/PciHostBridge/PciHostBridge.inf
INF  QuarkPlatformPkg/Platform/SpiFvbServices/PlatformSpi.inf
INF  QuarkPlatformPkg/Platform/SpiFvbServices/PlatformSmmSpi.inf
INF  QuarkSocPkg/QuarkNorthCluster/QNCInit/Dxe/QNCInitDxe.inf 
INF  QuarkSocPkg/QuarkNorthCluster/Smm/Dxe/SmmAccessDxe/SmmAccess.inf
INF  QuarkSocPkg/QuarkNorthCluster/S3Support/Dxe/QncS3Support.inf
INF  QuarkSocPkg/QuarkNorthCluster/Spi/RuntimeDxe/PchSpiRuntime.inf
INF  QuarkSocPkg/QuarkNorthCluster/Spi/Smm/PchSpiSmm.inf
INF  QuarkPlatformPkg/Platform/Dxe/Setup/DxePlatform.inf

#
# ACPI
#
INF  QuarkPlatformPkg/Platform/Dxe/SaveMemoryConfig/SaveMemoryConfig.inf
INF  MdeModulePkg/Universal/Acpi/S3SaveStateDxe/S3SaveStateDxe.inf
INF  QuarkPlatformPkg/Acpi/Dxe/BootScriptExecutorDxe/BootScriptExecutorDxe.inf
INF  MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf 
INF  IntelFrameworkModulePkg/Universal/Acpi/AcpiS3SaveDxe/AcpiS3SaveDxe.inf
INF  QuarkPlatformPkg/Acpi/Dxe/AcpiPlatform/AcpiPlatform.inf
INF  RuleOverride = ACPITABLE QuarkPlatformPkg/Acpi/AcpiTables/AcpiTables.inf

#
# SMM
#
INF  MdeModulePkg/Core/PiSmmCore/PiSmmIpl.inf
INF  MdeModulePkg/Core/PiSmmCore/PiSmmCore.inf
INF  IA32FamilyCpuBasePkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.inf
INF  UefiCpuPkg/CpuIo2Smm/CpuIo2Smm.inf
INF  QuarkSocPkg/QuarkNorthCluster/Smm/Dxe/SmmControlDxe/SmmControlDxe.inf
INF  QuarkSocPkg/QuarkNorthCluster/Smm/Dxe/SmmRuntime/SmmRuntime.inf
INF  QuarkSocPkg/QuarkNorthCluster/Smm/DxeSmm/QncSmmDispatcher/QNCSmmDispatcher.inf
INF  QuarkPlatformPkg/Acpi/DxeSmm/AcpiSmm/AcpiSmmPlatform.inf
INF  QuarkPlatformPkg/Acpi/DxeSmm/SmmPowerManagement/SmmPowerManagement.inf
INF  QuarkPlatformPkg/Override/MdeModulePkg/Universal/LockBox/SmmLockBox/SmmLockBox.inf
INF  IA32FamilyCpuBasePkg/PiSmmCommunication/PiSmmCommunicationSmm.inf

#
# SMBIOS
#
INF   MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe.inf
INF  QuarkPlatformPkg/Platform/Dxe/SmbiosMiscDxe/SmbiosMiscDxe.inf
INF  QuarkPlatformPkg/Platform/Dxe/MemorySubClass/MemorySubClass.inf
#
# PCI
#
INF  QuarkPlatformPkg/Pci/Dxe/PciPlatform/PciPlatform.inf
INF  MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
INF  QuarkSocPkg/QuarkSouthCluster/IohInit/Dxe/IohInitDxe.inf 
INF  QuarkSocPkg/QuarkSouthCluster/Uart/Dxe/SerialDxe.inf    
#
# USB
#
INF  QuarkPlatformPkg/Override/MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf
INF  QuarkSocPkg/QuarkSouthCluster/Usb/Ohci/Dxe/OhciDxe.inf
INF  QuarkPlatformPkg/Override/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf
INF  MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe.inf
INF  MdeModulePkg/Bus/Usb/UsbMouseDxe/UsbMouseDxe.inf
INF  MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf

#
# SDIO
#
INF  QuarkSocPkg/QuarkSouthCluster/Sdio/Dxe/SDControllerDxe/SDControllerDxe.inf
INF  QuarkSocPkg/QuarkSouthCluster/Sdio/Dxe/SDMediaDeviceDxe/SDMediaDeviceDxe.inf

#
# IDE
#
INF  MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
INF  MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf

#
# Console
#
INF  MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
INF  MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf 
INF  MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
INF  MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf

INF  MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
INF  MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
INF  MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf

#
# TPM DXE Driver.
#
!ifdef TPM_SUPPORT
INF  QuarkPlatformPkg/Override/SecurityPkg/Tcg/TcgDxe/TcgDxe.inf
!endif

#
# Shell and Applications
#
FILE APPLICATION = c57ad6b7-0515-40a8-9d21-551652854e37 {
  SECTION PE32 = EdkShellBinPkg/FullShell/Ia32/Shell_Full.efi
}
#!endif

#
# Legacy Modules
#
INF  PcAtChipsetPkg/8259InterruptControllerDxe/8259.inf

#       
# File System Modules
#        
INF FatPkg/EnhancedFatDxe/Fat.inf
INF  QuarkPlatformPkg/Platform/DxeSmm/SMIFlashDxe/SMIFlashDxe.inf

################################################################################
#
# FILE statements are provided so that a platform integrator can include
# complete EFI FFS files, as well as a method for constructing FFS files
# using curly "{}" brace scoping. The following three FILEs are
# for binary shell, binary fat and logo module.
#
################################################################################

################################################################################
#
# FV Section
#
# [FV] section is used to define what components or modules are placed within a flash
# device file.  This section also defines order the components and modules are positioned
# within the image.  The [FV] section consists of define statements, set statements and
# module statements.
#
################################################################################

[FV.EDKII_BOOT_STAGE2_RECOVERY]
BlockSize          = 0x1000
FvAlignment        = 16
ERASE_POLARITY     = 1
MEMORY_MAPPED      = TRUE
STICKY_WRITE       = TRUE
LOCK_CAP           = TRUE
LOCK_STATUS        = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP  = TRUE
WRITE_STATUS       = TRUE
WRITE_LOCK_CAP     = TRUE
WRITE_LOCK_STATUS  = TRUE
READ_DISABLED_CAP  = TRUE
READ_ENABLED_CAP   = TRUE
READ_STATUS        = TRUE
READ_LOCK_CAP      = TRUE
READ_LOCK_STATUS   = TRUE
FvNameGuid         = 30D9ED01-38D2-418a-90D5-C561750BF80F

  ##
  #  DXE Phase modules
  ##
INF  MdeModulePkg/Core/Dxe/DxeMain.inf
INF  MdeModulePkg/Universal/PCD/Dxe/Pcd.inf

#
# Early SoC / Platform modules. I2C must be loaded before platform init.
#
INF  QuarkSocPkg/QuarkSouthCluster/I2C/Dxe/I2CDxe.inf
INF  QuarkPlatformPkg/Platform/Dxe/PlatformInit/PlatformInitDxe.inf

#
# EDK Core modules.
#
INF  IntelFrameworkModulePkg/Universal/CpuIoDxe/CpuIoDxe.inf
INF  UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.inf
INF  MdeModulePkg/Universal/ReportStatusCodeRouter/RuntimeDxe/ReportStatusCodeRouterRuntimeDxe.inf
INF  MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHandlerRuntimeDxe.inf
INF  MdeModulePkg/Universal/ReportStatusCodeRouter/Smm/ReportStatusCodeRouterSmm.inf
INF  MdeModulePkg/Universal/StatusCodeHandler/Smm/StatusCodeHandlerSmm.inf
INF  IntelFrameworkModulePkg/Universal/SectionExtractionDxe/SectionExtractionDxe.inf

INF  MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
INF  IA32FamilyCpuBasePkg/CpuArchDxe/CpuArchDxe.inf
INF  IA32FamilyCpuBasePkg/CpuMpDxe/CpuMpDxe.inf
INF  MdeModulePkg/Universal/Metronome/Metronome.inf
INF  MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
INF  MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
INF  QuarkPlatformPkg/Override/MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteSmm.inf

#
# For recovery use Emulated variable store with need of NV storage.
#
INF  MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf

INF  MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
INF  MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf  
INF  MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe.inf
INF  QuarkPlatformPkg/Override/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf
INF  MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
INF  IntelFrameworkModulePkg/Universal/DataHubDxe/DataHubDxe.inf
INF  IntelFrameworkModulePkg/Universal/DataHubStdErrDxe/DataHubStdErrDxe.inf
INF  MdeModulePkg/Universal/MemoryTest/NullMemoryTestDxe/NullMemoryTestDxe.inf

#
# Platform
#
INF  QuarkPlatformPkg/Bds/BootManagerMenuApp/BootManagerMenuApp.inf
INF  QuarkPlatformPkg/Bds/BdsDxe/BdsDxe.inf

INF  QuarkPlatformPkg/Pci/Dxe/PciHostBridge/PciHostBridge.inf
INF  QuarkPlatformPkg/Platform/SpiFvbServices/PlatformSpi.inf
INF  QuarkPlatformPkg/Platform/SpiFvbServices/PlatformSmmSpi.inf
INF  QuarkSocPkg/QuarkNorthCluster/QNCInit/Dxe/QNCInitDxe.inf 
INF  QuarkSocPkg/QuarkNorthCluster/Smm/Dxe/SmmAccessDxe/SmmAccess.inf
INF  QuarkSocPkg/QuarkNorthCluster/S3Support/Dxe/QncS3Support.inf
INF  QuarkSocPkg/QuarkNorthCluster/Spi/RuntimeDxe/PchSpiRuntime.inf
INF  QuarkSocPkg/QuarkNorthCluster/Spi/Smm/PchSpiSmm.inf
INF  QuarkPlatformPkg/Platform/Dxe/Setup/DxePlatform.inf

#
# ACPI
#
INF  QuarkPlatformPkg/Platform/Dxe/SaveMemoryConfig/SaveMemoryConfig.inf
INF  MdeModulePkg/Universal/Acpi/S3SaveStateDxe/S3SaveStateDxe.inf
INF  QuarkPlatformPkg/Acpi/Dxe/BootScriptExecutorDxe/BootScriptExecutorDxe.inf
INF  MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf 
INF  IntelFrameworkModulePkg/Universal/Acpi/AcpiS3SaveDxe/AcpiS3SaveDxe.inf
INF  QuarkPlatformPkg/Acpi/Dxe/AcpiPlatform/AcpiPlatform.inf
INF  RuleOverride = ACPITABLE QuarkPlatformPkg/Acpi/AcpiTables/AcpiTables.inf

#
# SMM
#
INF  MdeModulePkg/Core/PiSmmCore/PiSmmIpl.inf
INF  MdeModulePkg/Core/PiSmmCore/PiSmmCore.inf
INF  IA32FamilyCpuBasePkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.inf
INF  UefiCpuPkg/CpuIo2Smm/CpuIo2Smm.inf
INF  QuarkSocPkg/QuarkNorthCluster/Smm/Dxe/SmmControlDxe/SmmControlDxe.inf
INF  QuarkSocPkg/QuarkNorthCluster/Smm/Dxe/SmmRuntime/SmmRuntime.inf
INF  QuarkSocPkg/QuarkNorthCluster/Smm/DxeSmm/QncSmmDispatcher/QNCSmmDispatcher.inf
INF  QuarkPlatformPkg/Acpi/DxeSmm/AcpiSmm/AcpiSmmPlatform.inf
INF  QuarkPlatformPkg/Acpi/DxeSmm/SmmPowerManagement/SmmPowerManagement.inf
INF  QuarkPlatformPkg/Override/MdeModulePkg/Universal/LockBox/SmmLockBox/SmmLockBox.inf
INF  IA32FamilyCpuBasePkg/PiSmmCommunication/PiSmmCommunicationSmm.inf

#
# SMBIOS
#
INF   MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe.inf
INF  QuarkPlatformPkg/Platform/Dxe/SmbiosMiscDxe/SmbiosMiscDxe.inf
INF  QuarkPlatformPkg/Platform/Dxe/MemorySubClass/MemorySubClass.inf
#
# PCI
#
INF  QuarkPlatformPkg/Pci/Dxe/PciPlatform/PciPlatform.inf
INF  MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
INF  QuarkSocPkg/QuarkSouthCluster/IohInit/Dxe/IohInitDxe.inf 
INF  QuarkSocPkg/QuarkSouthCluster/Uart/Dxe/SerialDxe.inf    
#
# USB
#
INF  QuarkPlatformPkg/Override/MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf
INF  QuarkSocPkg/QuarkSouthCluster/Usb/Ohci/Dxe/OhciDxe.inf
INF  QuarkPlatformPkg/Override/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf
INF  MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe.inf
INF  MdeModulePkg/Bus/Usb/UsbMouseDxe/UsbMouseDxe.inf
INF  MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf

#
# SDIO
#
INF  QuarkSocPkg/QuarkSouthCluster/Sdio/Dxe/SDControllerDxe/SDControllerDxe.inf
INF  QuarkSocPkg/QuarkSouthCluster/Sdio/Dxe/SDMediaDeviceDxe/SDMediaDeviceDxe.inf

#
# IDE
#
INF  MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
INF  MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf

#
# Console
#
INF  MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
INF  MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf 
INF  MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
INF  MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf

INF  MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
INF  MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
INF  MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf

#
# TPM DXE Driver.
#
!ifdef TPM_SUPPORT
INF  QuarkPlatformPkg/Override/SecurityPkg/Tcg/TcgDxe/TcgDxe.inf
!endif

#
# Shell and Applications
#
FILE APPLICATION = c57ad6b7-0515-40a8-9d21-551652854e37 {
  SECTION PE32 = EdkShellBinPkg/FullShell/Ia32/Shell_Full.efi
}
#!endif

#
# Legacy Modules
#
INF  PcAtChipsetPkg/8259InterruptControllerDxe/8259.inf

#       
# File System Modules
#        
INF FatPkg/EnhancedFatDxe/Fat.inf
INF  QuarkPlatformPkg/Platform/DxeSmm/SMIFlashDxe/SMIFlashDxe.inf

################################################################################
#
# FILE statements are provided so that a platform integrator can include
# complete EFI FFS files, as well as a method for constructing FFS files
# using curly "{}" brace scoping. The following three FILEs are
# for binary shell, binary fat and logo module.
#
################################################################################


################################################################################
#
# FV Section
#
# [FV] section is used to define what components or modules are placed within a flash
# device file.  This section also defines order the components and modules are positioned
# within the image.  The [FV] section consists of define statements, set statements and
# module statements.
#
################################################################################
[FV.EDKII_BOOT_STAGE2_COMPACT]
FvAlignment        = 16
ERASE_POLARITY     = 1
MEMORY_MAPPED      = TRUE
STICKY_WRITE       = TRUE
LOCK_CAP           = TRUE
LOCK_STATUS        = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP  = TRUE
WRITE_STATUS       = TRUE
WRITE_LOCK_CAP     = TRUE
WRITE_LOCK_STATUS  = TRUE
READ_DISABLED_CAP  = TRUE
READ_ENABLED_CAP   = TRUE
READ_STATUS        = TRUE
READ_LOCK_CAP      = TRUE
READ_LOCK_STATUS   = TRUE

FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
        SECTION GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
          SECTION FV_IMAGE = EDKII_BOOT_STAGE2
       }
     }

################################################################################
#
# FV Section
#
# [FV] section is used to define what components or modules are placed within a flash
# device file.  This section also defines order the components and modules are positioned
# within the image.  The [FV] section consists of define statements, set statements and
# module statements.
#
################################################################################
[FV.EDKII_PAYLOAD_IMAGE]
BlockSize          = 0x1000
FvBaseAddress      = 0xFFC00000
FvAlignment        = 16         #FV alignment and FV attributes setting.
ERASE_POLARITY     = 1
MEMORY_MAPPED      = TRUE
STICKY_WRITE       = TRUE
LOCK_CAP           = TRUE
LOCK_STATUS        = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP  = TRUE
WRITE_STATUS       = TRUE
WRITE_LOCK_CAP     = TRUE
WRITE_LOCK_STATUS  = TRUE
READ_DISABLED_CAP  = TRUE
READ_ENABLED_CAP   = TRUE
READ_STATUS        = TRUE
READ_LOCK_CAP      = TRUE
READ_LOCK_STATUS   = TRUE

FILE APPLICATION = PCD(gQuarkPlatformTokenSpaceGuid.PcdPayloadFile) {
     SECTION PE32 = QuarkPlatformPkg/Binary/Payload/PayloadSample.efi
     }

################################################################################
#
# Rules are use with the [FV] section's module INF type to define
# how an FFS file is created for a given INF file. The following Rule are the default
# rules for the different module type. User can add the customized rules to define the
# content of the FFS file.
#
################################################################################
[Rule.Common.SEC]
  FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
    TE  TE    Align = 8       $(INF_OUTPUT)/$(MODULE_NAME).efi
    RAW BIN   Align = 16      |.com
  }

[Rule.Common.PEI_CORE]
  FILE PEI_CORE = $(NAMED_GUID)            {
    TE       TE               $(INF_OUTPUT)/$(MODULE_NAME).efi
    UI       STRING="$(MODULE_NAME)" Optional
    VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
  }

[Rule.Common.PEIM.NORELOC]
  FILE PEIM = $(NAMED_GUID) RELOCS_STRIPPED  {
     PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex
     TE        TE                        $(INF_OUTPUT)/$(MODULE_NAME).efi
     UI        STRING="$(MODULE_NAME)" Optional
     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
  }

[Rule.Common.PEIM]
  FILE PEIM = $(NAMED_GUID)               {
     PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex
     TE        TE                        $(INF_OUTPUT)/$(MODULE_NAME).efi
     UI        STRING="$(MODULE_NAME)" Optional
     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
  }

[Rule.Common.DXE_CORE]
  FILE DXE_CORE = $(NAMED_GUID) {
    PE32      PE32                     $(INF_OUTPUT)/$(MODULE_NAME).efi
    UI        STRING="$(MODULE_NAME)" Optional
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
  }

[Rule.Common.UEFI_DRIVER]
  FILE DRIVER = $(NAMED_GUID) {
    DXE_DEPEX DXE_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
    PE32      PE32                     $(INF_OUTPUT)/$(MODULE_NAME).efi
    UI        STRING="$(MODULE_NAME)" Optional
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
  }

[Rule.Common.DXE_DRIVER]
  FILE DRIVER = $(NAMED_GUID) {
    DXE_DEPEX DXE_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
    PE32      PE32                     $(INF_OUTPUT)/$(MODULE_NAME).efi
    UI        STRING="$(MODULE_NAME)" Optional
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
  }

[Rule.Common.DXE_RUNTIME_DRIVER]
  FILE DRIVER = $(NAMED_GUID) {
    DXE_DEPEX DXE_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
    PE32      PE32                     $(INF_OUTPUT)/$(MODULE_NAME).efi
    UI        STRING="$(MODULE_NAME)" Optional
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
  }

[Rule.Common.DXE_SMM_DRIVER]
  FILE SMM = $(NAMED_GUID) {
    SMM_DEPEX SMM_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
    PE32      PE32                     $(INF_OUTPUT)/$(MODULE_NAME).efi
    UI        STRING="$(MODULE_NAME)" Optional
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
  }

[Rule.Common.SMM_CORE]
  FILE SMM_CORE = $(NAMED_GUID) {
    PE32      PE32                     $(INF_OUTPUT)/$(MODULE_NAME).efi
    UI        STRING="$(MODULE_NAME)" Optional
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
  }

[Rule.Common.UEFI_APPLICATION]
  FILE APPLICATION = $(NAMED_GUID) {
    PE32      PE32                     $(INF_OUTPUT)/$(MODULE_NAME).efi
    UI        STRING="$(MODULE_NAME)" Optional
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
  }

[Rule.Common.UEFI_APPLICATION.UI]
  FILE APPLICATION = $(NAMED_GUID) {
    PE32      PE32                     $(INF_OUTPUT)/$(MODULE_NAME).efi
    UI        STRING="Enter Setup"
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
  }
  
[Rule.Common.USER_DEFINED.ACPITABLE]
  FILE FREEFORM = $(NAMED_GUID) {
    RAW ACPI               |.acpi
    RAW ASL                |.aml
  }