Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull more input updates from Dmitry Torokhov:
 "Second round of updates for the input subsystem.

  The BYD PS/2 protocol driver now uses absolute reporting mode and
  should behave more like other touchpads; Synaptics driver needed to
  extend one of its quirks to a newer firmware version, and a few USB
  drivers got tightened up checks for the contents of their descriptors"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: sur40 - fix DMA on stack
  Input: ati_remote2 - fix crashes on detecting device with invalid descriptor
  Input: synaptics - handle spurious release of trackstick buttons, again
  Input: synaptics-rmi4 - remove check of Non-NULL array
  Input: byd - enable absolute mode
  Input: ims-pcu - sanity check against missing interfaces
  Input: melfas_mip4 - add hw_version sysfs attribute
diff --git a/drivers/input/misc/ati_remote2.c b/drivers/input/misc/ati_remote2.c
index cfd58e8..1c5914c 100644
--- a/drivers/input/misc/ati_remote2.c
+++ b/drivers/input/misc/ati_remote2.c
@@ -817,26 +817,49 @@
 
 	ar2->udev = udev;
 
+	/* Sanity check, first interface must have an endpoint */
+	if (alt->desc.bNumEndpoints < 1 || !alt->endpoint) {
+		dev_err(&interface->dev,
+			"%s(): interface 0 must have an endpoint\n", __func__);
+		r = -ENODEV;
+		goto fail1;
+	}
 	ar2->intf[0] = interface;
 	ar2->ep[0] = &alt->endpoint[0].desc;
 
+	/* Sanity check, the device must have two interfaces */
 	ar2->intf[1] = usb_ifnum_to_if(udev, 1);
+	if ((udev->actconfig->desc.bNumInterfaces < 2) || !ar2->intf[1]) {
+		dev_err(&interface->dev, "%s(): need 2 interfaces, found %d\n",
+			__func__, udev->actconfig->desc.bNumInterfaces);
+		r = -ENODEV;
+		goto fail1;
+	}
+
 	r = usb_driver_claim_interface(&ati_remote2_driver, ar2->intf[1], ar2);
 	if (r)
 		goto fail1;
+
+	/* Sanity check, second interface must have an endpoint */
 	alt = ar2->intf[1]->cur_altsetting;
+	if (alt->desc.bNumEndpoints < 1 || !alt->endpoint) {
+		dev_err(&interface->dev,
+			"%s(): interface 1 must have an endpoint\n", __func__);
+		r = -ENODEV;
+		goto fail2;
+	}
 	ar2->ep[1] = &alt->endpoint[0].desc;
 
 	r = ati_remote2_urb_init(ar2);
 	if (r)
-		goto fail2;
+		goto fail3;
 
 	ar2->channel_mask = channel_mask;
 	ar2->mode_mask = mode_mask;
 
 	r = ati_remote2_setup(ar2, ar2->channel_mask);
 	if (r)
-		goto fail2;
+		goto fail3;
 
 	usb_make_path(udev, ar2->phys, sizeof(ar2->phys));
 	strlcat(ar2->phys, "/input0", sizeof(ar2->phys));
@@ -845,11 +868,11 @@
 
 	r = sysfs_create_group(&udev->dev.kobj, &ati_remote2_attr_group);
 	if (r)
-		goto fail2;
+		goto fail3;
 
 	r = ati_remote2_input_init(ar2);
 	if (r)
-		goto fail3;
+		goto fail4;
 
 	usb_set_intfdata(interface, ar2);
 
@@ -857,10 +880,11 @@
 
 	return 0;
 
- fail3:
+ fail4:
 	sysfs_remove_group(&udev->dev.kobj, &ati_remote2_attr_group);
- fail2:
+ fail3:
 	ati_remote2_urb_cleanup(ar2);
+ fail2:
 	usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]);
  fail1:
 	kfree(ar2);
diff --git a/drivers/input/misc/ims-pcu.c b/drivers/input/misc/ims-pcu.c
index ac1fa5f..9c0ea36 100644
--- a/drivers/input/misc/ims-pcu.c
+++ b/drivers/input/misc/ims-pcu.c
@@ -1663,6 +1663,8 @@
 
 	pcu->ctrl_intf = usb_ifnum_to_if(pcu->udev,
 					 union_desc->bMasterInterface0);
+	if (!pcu->ctrl_intf)
+		return -EINVAL;
 
 	alt = pcu->ctrl_intf->cur_altsetting;
 	pcu->ep_ctrl = &alt->endpoint[0].desc;
@@ -1670,6 +1672,8 @@
 
 	pcu->data_intf = usb_ifnum_to_if(pcu->udev,
 					 union_desc->bSlaveInterface0);
+	if (!pcu->data_intf)
+		return -EINVAL;
 
 	alt = pcu->data_intf->cur_altsetting;
 	if (alt->desc.bNumEndpoints != 2) {
diff --git a/drivers/input/mouse/byd.c b/drivers/input/mouse/byd.c
index 9425e0f..fdc243ca 100644
--- a/drivers/input/mouse/byd.c
+++ b/drivers/input/mouse/byd.c
@@ -12,10 +12,12 @@
 #include <linux/input.h>
 #include <linux/libps2.h>
 #include <linux/serio.h>
+#include <linux/slab.h>
 
 #include "psmouse.h"
 #include "byd.h"
 
+/* PS2 Bits */
 #define PS2_Y_OVERFLOW	BIT_MASK(7)
 #define PS2_X_OVERFLOW	BIT_MASK(6)
 #define PS2_Y_SIGN	BIT_MASK(5)
@@ -26,69 +28,249 @@
 #define PS2_LEFT	BIT_MASK(0)
 
 /*
- * The touchpad reports gestures in the last byte of each packet. It can take
- * any of the following values:
+ * BYD pad constants
  */
 
-/* One-finger scrolling in one of the edge scroll zones. */
-#define BYD_SCROLLUP		0xCA
-#define BYD_SCROLLDOWN		0x36
-#define BYD_SCROLLLEFT		0xCB
-#define BYD_SCROLLRIGHT		0x35
-/* Two-finger scrolling. */
-#define BYD_2DOWN		0x2B
-#define BYD_2UP			0xD5
-#define BYD_2LEFT		0xD6
-#define BYD_2RIGHT		0x2A
-/* Pinching in or out. */
-#define BYD_ZOOMOUT		0xD8
-#define BYD_ZOOMIN		0x28
-/* Three-finger swipe. */
-#define BYD_3UP			0xD3
-#define BYD_3DOWN		0x2D
-#define BYD_3LEFT		0xD4
-#define BYD_3RIGHT		0x2C
-/* Four-finger swipe. */
-#define BYD_4UP			0xCD
-#define BYD_4DOWN		0x33
+/*
+ * True device resolution is unknown, however experiments show the
+ * resolution is about 111 units/mm.
+ * Absolute coordinate packets are in the range 0-255 for both X and Y
+ * we pick ABS_X/ABS_Y dimensions which are multiples of 256 and in
+ * the right ballpark given the touchpad's physical dimensions and estimate
+ * resolution per spec sheet, device active area dimensions are
+ * 101.6 x 60.1 mm.
+ */
+#define BYD_PAD_WIDTH		11264
+#define BYD_PAD_HEIGHT		6656
+#define BYD_PAD_RESOLUTION	111
 
-int byd_detect(struct psmouse *psmouse, bool set_properties)
+/*
+ * Given the above dimensions, relative packets velocity is in multiples of
+ * 1 unit / 11 milliseconds.  We use this dt to estimate distance traveled
+ */
+#define BYD_DT			11
+/* Time in jiffies used to timeout various touch events (64 ms) */
+#define BYD_TOUCH_TIMEOUT	msecs_to_jiffies(64)
+
+/* BYD commands reverse engineered from windows driver */
+
+/*
+ * Swipe gesture from off-pad to on-pad
+ *  0 : disable
+ *  1 : enable
+ */
+#define BYD_CMD_SET_OFFSCREEN_SWIPE		0x10cc
+/*
+ * Tap and drag delay time
+ *  0 : disable
+ *  1 - 8 : least to most delay
+ */
+#define BYD_CMD_SET_TAP_DRAG_DELAY_TIME		0x10cf
+/*
+ * Physical buttons function mapping
+ *  0 : enable
+ *  4 : normal
+ *  5 : left button custom command
+ *  6 : right button custom command
+ *  8 : disable
+ */
+#define BYD_CMD_SET_PHYSICAL_BUTTONS		0x10d0
+/*
+ * Absolute mode (1 byte X/Y resolution)
+ *  0 : disable
+ *  2 : enable
+ */
+#define BYD_CMD_SET_ABSOLUTE_MODE		0x10d1
+/*
+ * Two finger scrolling
+ *  1 : vertical
+ *  2 : horizontal
+ *  3 : vertical + horizontal
+ *  4 : disable
+ */
+#define BYD_CMD_SET_TWO_FINGER_SCROLL		0x10d2
+/*
+ * Handedness
+ *  1 : right handed
+ *  2 : left handed
+ */
+#define BYD_CMD_SET_HANDEDNESS			0x10d3
+/*
+ * Tap to click
+ *  1 : enable
+ *  2 : disable
+ */
+#define BYD_CMD_SET_TAP				0x10d4
+/*
+ * Tap and drag
+ *  1 : tap and hold to drag
+ *  2 : tap and hold to drag + lock
+ *  3 : disable
+ */
+#define BYD_CMD_SET_TAP_DRAG			0x10d5
+/*
+ * Touch sensitivity
+ *  1 - 7 : least to most sensitive
+ */
+#define BYD_CMD_SET_TOUCH_SENSITIVITY		0x10d6
+/*
+ * One finger scrolling
+ *  1 : vertical
+ *  2 : horizontal
+ *  3 : vertical + horizontal
+ *  4 : disable
+ */
+#define BYD_CMD_SET_ONE_FINGER_SCROLL		0x10d7
+/*
+ * One finger scrolling function
+ *  1 : free scrolling
+ *  2 : edge motion
+ *  3 : free scrolling + edge motion
+ *  4 : disable
+ */
+#define BYD_CMD_SET_ONE_FINGER_SCROLL_FUNC	0x10d8
+/*
+ * Sliding speed
+ *  1 - 5 : slowest to fastest
+ */
+#define BYD_CMD_SET_SLIDING_SPEED		0x10da
+/*
+ * Edge motion
+ *  1 : disable
+ *  2 : enable when dragging
+ *  3 : enable when dragging and pointing
+ */
+#define BYD_CMD_SET_EDGE_MOTION			0x10db
+/*
+ * Left edge region size
+ *  0 - 7 : smallest to largest width
+ */
+#define BYD_CMD_SET_LEFT_EDGE_REGION		0x10dc
+/*
+ * Top edge region size
+ *  0 - 9 : smallest to largest height
+ */
+#define BYD_CMD_SET_TOP_EDGE_REGION		0x10dd
+/*
+ * Disregard palm press as clicks
+ *  1 - 6 : smallest to largest
+ */
+#define BYD_CMD_SET_PALM_CHECK			0x10de
+/*
+ * Right edge region size
+ *  0 - 7 : smallest to largest width
+ */
+#define BYD_CMD_SET_RIGHT_EDGE_REGION		0x10df
+/*
+ * Bottom edge region size
+ *  0 - 9 : smallest to largest height
+ */
+#define BYD_CMD_SET_BOTTOM_EDGE_REGION		0x10e1
+/*
+ * Multitouch gestures
+ *  1 : enable
+ *  2 : disable
+ */
+#define BYD_CMD_SET_MULTITOUCH			0x10e3
+/*
+ * Edge motion speed
+ *  0 : control with finger pressure
+ *  1 - 9 : slowest to fastest
+ */
+#define BYD_CMD_SET_EDGE_MOTION_SPEED		0x10e4
+/*
+ * Two finger scolling function
+ *  0 : free scrolling
+ *  1 : free scrolling (with momentum)
+ *  2 : edge motion
+ *  3 : free scrolling (with momentum) + edge motion
+ *  4 : disable
+ */
+#define BYD_CMD_SET_TWO_FINGER_SCROLL_FUNC	0x10e5
+
+/*
+ * The touchpad generates a mixture of absolute and relative packets, indicated
+ * by the the last byte of each packet being set to one of the following:
+ */
+#define BYD_PACKET_ABSOLUTE			0xf8
+#define BYD_PACKET_RELATIVE			0x00
+/* Multitouch gesture packets */
+#define BYD_PACKET_PINCH_IN			0xd8
+#define BYD_PACKET_PINCH_OUT			0x28
+#define BYD_PACKET_ROTATE_CLOCKWISE		0x29
+#define BYD_PACKET_ROTATE_ANTICLOCKWISE		0xd7
+#define BYD_PACKET_TWO_FINGER_SCROLL_RIGHT	0x2a
+#define BYD_PACKET_TWO_FINGER_SCROLL_DOWN	0x2b
+#define BYD_PACKET_TWO_FINGER_SCROLL_UP		0xd5
+#define BYD_PACKET_TWO_FINGER_SCROLL_LEFT	0xd6
+#define BYD_PACKET_THREE_FINGER_SWIPE_RIGHT	0x2c
+#define BYD_PACKET_THREE_FINGER_SWIPE_DOWN	0x2d
+#define BYD_PACKET_THREE_FINGER_SWIPE_UP	0xd3
+#define BYD_PACKET_THREE_FINGER_SWIPE_LEFT	0xd4
+#define BYD_PACKET_FOUR_FINGER_DOWN		0x33
+#define BYD_PACKET_FOUR_FINGER_UP		0xcd
+#define BYD_PACKET_REGION_SCROLL_RIGHT		0x35
+#define BYD_PACKET_REGION_SCROLL_DOWN		0x36
+#define BYD_PACKET_REGION_SCROLL_UP		0xca
+#define BYD_PACKET_REGION_SCROLL_LEFT		0xcb
+#define BYD_PACKET_RIGHT_CORNER_CLICK		0xd2
+#define BYD_PACKET_LEFT_CORNER_CLICK		0x2e
+#define BYD_PACKET_LEFT_AND_RIGHT_CORNER_CLICK	0x2f
+#define BYD_PACKET_ONTO_PAD_SWIPE_RIGHT		0x37
+#define BYD_PACKET_ONTO_PAD_SWIPE_DOWN		0x30
+#define BYD_PACKET_ONTO_PAD_SWIPE_UP		0xd0
+#define BYD_PACKET_ONTO_PAD_SWIPE_LEFT		0xc9
+
+struct byd_data {
+	struct timer_list timer;
+	s32 abs_x;
+	s32 abs_y;
+	typeof(jiffies) last_touch_time;
+	bool btn_left;
+	bool btn_right;
+	bool touch;
+};
+
+static void byd_report_input(struct psmouse *psmouse)
 {
-	struct ps2dev *ps2dev = &psmouse->ps2dev;
-	unsigned char param[4];
+	struct byd_data *priv = psmouse->private;
+	struct input_dev *dev = psmouse->dev;
 
-	param[0] = 0x03;
-	param[1] = 0x00;
-	param[2] = 0x00;
-	param[3] = 0x00;
+	input_report_key(dev, BTN_TOUCH, priv->touch);
+	input_report_key(dev, BTN_TOOL_FINGER, priv->touch);
 
-	if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES))
-		return -1;
-	if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES))
-		return -1;
-	if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES))
-		return -1;
-	if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES))
-		return -1;
-	if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
-		return -1;
+	input_report_abs(dev, ABS_X, priv->abs_x);
+	input_report_abs(dev, ABS_Y, priv->abs_y);
+	input_report_key(dev, BTN_LEFT, priv->btn_left);
+	input_report_key(dev, BTN_RIGHT, priv->btn_right);
 
-	if (param[1] != 0x03 || param[2] != 0x64)
-		return -ENODEV;
+	input_sync(dev);
+}
 
-	psmouse_dbg(psmouse, "BYD touchpad detected\n");
+static void byd_clear_touch(unsigned long data)
+{
+	struct psmouse *psmouse = (struct psmouse *)data;
+	struct byd_data *priv = psmouse->private;
 
-	if (set_properties) {
-		psmouse->vendor = "BYD";
-		psmouse->name = "TouchPad";
-	}
+	serio_pause_rx(psmouse->ps2dev.serio);
+	priv->touch = false;
 
-	return 0;
+	byd_report_input(psmouse);
+
+	serio_continue_rx(psmouse->ps2dev.serio);
+
+	/*
+	 * Move cursor back to center of pad when we lose touch - this
+	 * specifically improves user experience when moving cursor with one
+	 * finger, and pressing a button with another.
+	 */
+	priv->abs_x = BYD_PAD_WIDTH / 2;
+	priv->abs_y = BYD_PAD_HEIGHT / 2;
 }
 
 static psmouse_ret_t byd_process_byte(struct psmouse *psmouse)
 {
-	struct input_dev *dev = psmouse->dev;
+	struct byd_data *priv = psmouse->private;
 	u8 *pkt = psmouse->packet;
 
 	if (psmouse->pktcnt > 0 && !(pkt[0] & PS2_ALWAYS_1)) {
@@ -102,53 +284,34 @@
 
 	/* Otherwise, a full packet has been received */
 	switch (pkt[3]) {
-	case 0: {
+	case BYD_PACKET_ABSOLUTE:
+		/* Only use absolute packets for the start of movement. */
+		if (!priv->touch) {
+			/* needed to detect tap */
+			typeof(jiffies) tap_time =
+				priv->last_touch_time + BYD_TOUCH_TIMEOUT;
+			priv->touch = time_after(jiffies, tap_time);
+
+			/* init abs position */
+			priv->abs_x = pkt[1] * (BYD_PAD_WIDTH / 256);
+			priv->abs_y = (255 - pkt[2]) * (BYD_PAD_HEIGHT / 256);
+		}
+		break;
+	case BYD_PACKET_RELATIVE: {
 		/* Standard packet */
 		/* Sign-extend if a sign bit is set. */
-		unsigned int signx = pkt[0] & PS2_X_SIGN ? ~0xFF : 0;
-		unsigned int signy = pkt[0] & PS2_Y_SIGN ? ~0xFF : 0;
-		int dx = signx | (int) pkt[1];
-		int dy = signy | (int) pkt[2];
+		u32 signx = pkt[0] & PS2_X_SIGN ? ~0xFF : 0;
+		u32 signy = pkt[0] & PS2_Y_SIGN ? ~0xFF : 0;
+		s32 dx = signx | (int) pkt[1];
+		s32 dy = signy | (int) pkt[2];
 
-		input_report_rel(psmouse->dev, REL_X, dx);
-		input_report_rel(psmouse->dev, REL_Y, -dy);
+		/* Update position based on velocity */
+		priv->abs_x += dx * BYD_DT;
+		priv->abs_y -= dy * BYD_DT;
 
-		input_report_key(psmouse->dev, BTN_LEFT, pkt[0] & PS2_LEFT);
-		input_report_key(psmouse->dev, BTN_RIGHT, pkt[0] & PS2_RIGHT);
-		input_report_key(psmouse->dev, BTN_MIDDLE, pkt[0] & PS2_MIDDLE);
+		priv->touch = true;
 		break;
 	}
-
-	case BYD_SCROLLDOWN:
-	case BYD_2DOWN:
-		input_report_rel(dev, REL_WHEEL, -1);
-		break;
-
-	case BYD_SCROLLUP:
-	case BYD_2UP:
-		input_report_rel(dev, REL_WHEEL, 1);
-		break;
-
-	case BYD_SCROLLLEFT:
-	case BYD_2LEFT:
-		input_report_rel(dev, REL_HWHEEL, -1);
-		break;
-
-	case BYD_SCROLLRIGHT:
-	case BYD_2RIGHT:
-		input_report_rel(dev, REL_HWHEEL, 1);
-		break;
-
-	case BYD_ZOOMOUT:
-	case BYD_ZOOMIN:
-	case BYD_3UP:
-	case BYD_3DOWN:
-	case BYD_3LEFT:
-	case BYD_3RIGHT:
-	case BYD_4UP:
-	case BYD_4DOWN:
-		break;
-
 	default:
 		psmouse_warn(psmouse,
 			     "Unrecognized Z: pkt = %02x %02x %02x %02x\n",
@@ -157,134 +320,76 @@
 		return PSMOUSE_BAD_DATA;
 	}
 
-	input_sync(dev);
+	priv->btn_left = pkt[0] & PS2_LEFT;
+	priv->btn_right = pkt[0] & PS2_RIGHT;
+
+	byd_report_input(psmouse);
+
+	/* Reset time since last touch. */
+	if (priv->touch) {
+		priv->last_touch_time = jiffies;
+		mod_timer(&priv->timer, jiffies + BYD_TOUCH_TIMEOUT);
+	}
 
 	return PSMOUSE_FULL_PACKET;
 }
 
-/* Send a sequence of bytes, where each is ACKed before the next is sent. */
-static int byd_send_sequence(struct psmouse *psmouse, const u8 *seq, size_t len)
-{
-	unsigned int i;
-
-	for (i = 0; i < len; ++i) {
-		if (ps2_command(&psmouse->ps2dev, NULL, seq[i]))
-			return -1;
-	}
-	return 0;
-}
-
-/* Keep scrolling after fingers are removed. */
-#define SCROLL_INERTIAL		0x01
-#define SCROLL_NO_INERTIAL	0x02
-
-/* Clicking can be done by tapping or pressing. */
-#define CLICK_BOTH		0x01
-/* Clicking can only be done by pressing. */
-#define CLICK_PRESS_ONLY	0x02
-
-static int byd_enable(struct psmouse *psmouse)
-{
-	const u8 seq1[] = { 0xE2, 0x00, 0xE0, 0x02, 0xE0 };
-	const u8 seq2[] = {
-		0xD3, 0x01,
-		0xD0, 0x00,
-		0xD0, 0x04,
-		/* Whether clicking is done by tapping or pressing. */
-		0xD4, CLICK_PRESS_ONLY,
-		0xD5, 0x01,
-		0xD7, 0x03,
-		/* Vertical and horizontal one-finger scroll zone inertia. */
-		0xD8, SCROLL_INERTIAL,
-		0xDA, 0x05,
-		0xDB, 0x02,
-		0xE4, 0x05,
-		0xD6, 0x01,
-		0xDE, 0x04,
-		0xE3, 0x01,
-		0xCF, 0x00,
-		0xD2, 0x03,
-		/* Vertical and horizontal two-finger scrolling inertia. */
-		0xE5, SCROLL_INERTIAL,
-		0xD9, 0x02,
-		0xD9, 0x07,
-		0xDC, 0x03,
-		0xDD, 0x03,
-		0xDF, 0x03,
-		0xE1, 0x03,
-		0xD1, 0x00,
-		0xCE, 0x00,
-		0xCC, 0x00,
-		0xE0, 0x00,
-		0xE2, 0x01
-	};
-	u8 param[4];
-
-	if (byd_send_sequence(psmouse, seq1, ARRAY_SIZE(seq1)))
-		return -1;
-
-	/* Send a 0x01 command, which should return 4 bytes. */
-	if (ps2_command(&psmouse->ps2dev, param, 0x0401))
-		return -1;
-
-	if (byd_send_sequence(psmouse, seq2, ARRAY_SIZE(seq2)))
-		return -1;
-
-	return 0;
-}
-
-/*
- * Send the set of PS/2 commands required to make it identify as an
- * intellimouse with 4-byte instead of 3-byte packets.
- */
-static int byd_send_intellimouse_sequence(struct psmouse *psmouse)
+static int byd_reset_touchpad(struct psmouse *psmouse)
 {
 	struct ps2dev *ps2dev = &psmouse->ps2dev;
 	u8 param[4];
-	int i;
+	size_t i;
+
 	const struct {
 		u16 command;
 		u8 arg;
 	} seq[] = {
-		{ PSMOUSE_CMD_RESET_BAT, 0 },
-		{ PSMOUSE_CMD_RESET_BAT, 0 },
-		{ PSMOUSE_CMD_GETID, 0 },
-		{ PSMOUSE_CMD_SETSCALE11, 0 },
-		{ PSMOUSE_CMD_SETSCALE11, 0 },
-		{ PSMOUSE_CMD_SETSCALE11, 0 },
-		{ PSMOUSE_CMD_GETINFO, 0 },
-		{ PSMOUSE_CMD_SETRES, 0x03 },
+		/*
+		 * Intellimouse initialization sequence, to get 4-byte instead
+		 * of 3-byte packets.
+		 */
 		{ PSMOUSE_CMD_SETRATE, 0xC8 },
 		{ PSMOUSE_CMD_SETRATE, 0x64 },
 		{ PSMOUSE_CMD_SETRATE, 0x50 },
 		{ PSMOUSE_CMD_GETID, 0 },
-		{ PSMOUSE_CMD_SETRATE, 0xC8 },
-		{ PSMOUSE_CMD_SETRATE, 0xC8 },
-		{ PSMOUSE_CMD_SETRATE, 0x50 },
-		{ PSMOUSE_CMD_GETID, 0 },
-		{ PSMOUSE_CMD_SETRATE, 0x64 },
-		{ PSMOUSE_CMD_SETRES, 0x03 },
-		{ PSMOUSE_CMD_ENABLE, 0 }
+		{ PSMOUSE_CMD_ENABLE, 0 },
+		/*
+		 * BYD-specific initialization, which enables absolute mode and
+		 * (if desired), the touchpad's built-in gesture detection.
+		 */
+		{ 0x10E2, 0x00 },
+		{ 0x10E0, 0x02 },
+		/* The touchpad should reply with 4 seemingly-random bytes */
+		{ 0x14E0, 0x01 },
+		/* Pairs of parameters and values. */
+		{ BYD_CMD_SET_HANDEDNESS, 0x01 },
+		{ BYD_CMD_SET_PHYSICAL_BUTTONS, 0x04 },
+		{ BYD_CMD_SET_TAP, 0x02 },
+		{ BYD_CMD_SET_ONE_FINGER_SCROLL, 0x04 },
+		{ BYD_CMD_SET_ONE_FINGER_SCROLL_FUNC, 0x04 },
+		{ BYD_CMD_SET_EDGE_MOTION, 0x01 },
+		{ BYD_CMD_SET_PALM_CHECK, 0x00 },
+		{ BYD_CMD_SET_MULTITOUCH, 0x02 },
+		{ BYD_CMD_SET_TWO_FINGER_SCROLL, 0x04 },
+		{ BYD_CMD_SET_TWO_FINGER_SCROLL_FUNC, 0x04 },
+		{ BYD_CMD_SET_LEFT_EDGE_REGION, 0x00 },
+		{ BYD_CMD_SET_TOP_EDGE_REGION, 0x00 },
+		{ BYD_CMD_SET_RIGHT_EDGE_REGION, 0x00 },
+		{ BYD_CMD_SET_BOTTOM_EDGE_REGION, 0x00 },
+		{ BYD_CMD_SET_ABSOLUTE_MODE, 0x02 },
+		/* Finalize initialization. */
+		{ 0x10E0, 0x00 },
+		{ 0x10E2, 0x01 },
 	};
 
-	memset(param, 0, sizeof(param));
 	for (i = 0; i < ARRAY_SIZE(seq); ++i) {
+		memset(param, 0, sizeof(param));
 		param[0] = seq[i].arg;
 		if (ps2_command(ps2dev, param, seq[i].command))
-			return -1;
+			return -EIO;
 	}
 
-	return 0;
-}
-
-static int byd_reset_touchpad(struct psmouse *psmouse)
-{
-	if (byd_send_intellimouse_sequence(psmouse))
-		return -EIO;
-
-	if (byd_enable(psmouse))
-		return -EIO;
-
+	psmouse_set_state(psmouse, PSMOUSE_ACTIVATED);
 	return 0;
 }
 
@@ -314,9 +419,50 @@
 	return 0;
 }
 
+static void byd_disconnect(struct psmouse *psmouse)
+{
+	struct byd_data *priv = psmouse->private;
+
+	if (priv) {
+		del_timer(&priv->timer);
+		kfree(psmouse->private);
+		psmouse->private = NULL;
+	}
+}
+
+int byd_detect(struct psmouse *psmouse, bool set_properties)
+{
+	struct ps2dev *ps2dev = &psmouse->ps2dev;
+	u8 param[4] = {0x03, 0x00, 0x00, 0x00};
+
+	if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES))
+		return -1;
+	if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES))
+		return -1;
+	if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES))
+		return -1;
+	if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES))
+		return -1;
+	if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
+		return -1;
+
+	if (param[1] != 0x03 || param[2] != 0x64)
+		return -ENODEV;
+
+	psmouse_dbg(psmouse, "BYD touchpad detected\n");
+
+	if (set_properties) {
+		psmouse->vendor = "BYD";
+		psmouse->name = "TouchPad";
+	}
+
+	return 0;
+}
+
 int byd_init(struct psmouse *psmouse)
 {
 	struct input_dev *dev = psmouse->dev;
+	struct byd_data *priv;
 
 	if (psmouse_reset(psmouse))
 		return -EIO;
@@ -324,14 +470,39 @@
 	if (byd_reset_touchpad(psmouse))
 		return -EIO;
 
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	memset(priv, 0, sizeof(*priv));
+	setup_timer(&priv->timer, byd_clear_touch, (unsigned long) psmouse);
+
+	psmouse->private = priv;
+	psmouse->disconnect = byd_disconnect;
 	psmouse->reconnect = byd_reconnect;
 	psmouse->protocol_handler = byd_process_byte;
 	psmouse->pktsize = 4;
 	psmouse->resync_time = 0;
 
-	__set_bit(BTN_MIDDLE, dev->keybit);
-	__set_bit(REL_WHEEL, dev->relbit);
-	__set_bit(REL_HWHEEL, dev->relbit);
+	__set_bit(INPUT_PROP_POINTER, dev->propbit);
+	/* Touchpad */
+	__set_bit(BTN_TOUCH, dev->keybit);
+	__set_bit(BTN_TOOL_FINGER, dev->keybit);
+	/* Buttons */
+	__set_bit(BTN_LEFT, dev->keybit);
+	__set_bit(BTN_RIGHT, dev->keybit);
+	__clear_bit(BTN_MIDDLE, dev->keybit);
+
+	/* Absolute position */
+	__set_bit(EV_ABS, dev->evbit);
+	input_set_abs_params(dev, ABS_X, 0, BYD_PAD_WIDTH, 0, 0);
+	input_set_abs_params(dev, ABS_Y, 0, BYD_PAD_HEIGHT, 0, 0);
+	input_abs_set_res(dev, ABS_X, BYD_PAD_RESOLUTION);
+	input_abs_set_res(dev, ABS_Y, BYD_PAD_RESOLUTION);
+	/* No relative support */
+	__clear_bit(EV_REL, dev->evbit);
+	__clear_bit(REL_X, dev->relbit);
+	__clear_bit(REL_Y, dev->relbit);
 
 	return 0;
 }
diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
index 39d1bec..5784e20 100644
--- a/drivers/input/mouse/psmouse-base.c
+++ b/drivers/input/mouse/psmouse-base.c
@@ -846,7 +846,7 @@
 #ifdef CONFIG_MOUSE_PS2_BYD
 	{
 		.type		= PSMOUSE_BYD,
-		.name		= "BydPS/2",
+		.name		= "BYDPS/2",
 		.alias		= "byd",
 		.detect		= byd_detect,
 		.init		= byd_init,
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 6025eb4..a41d832 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -862,8 +862,9 @@
 	if (!SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap))
 		return;
 
-	/* Bug in FW 8.1, buttons are reported only when ExtBit is 1 */
-	if (SYN_ID_FULL(priv->identity) == 0x801 &&
+	/* Bug in FW 8.1 & 8.2, buttons are reported only when ExtBit is 1 */
+	if ((SYN_ID_FULL(priv->identity) == 0x801 ||
+	     SYN_ID_FULL(priv->identity) == 0x802) &&
 	    !((psmouse->packet[0] ^ psmouse->packet[3]) & 0x02))
 		return;
 
diff --git a/drivers/input/rmi4/rmi_driver.c b/drivers/input/rmi4/rmi_driver.c
index da38f0a..faa295e 100644
--- a/drivers/input/rmi4/rmi_driver.c
+++ b/drivers/input/rmi4/rmi_driver.c
@@ -126,7 +126,7 @@
 		return;
 
 	fh = to_rmi_function_handler(fn->dev.driver);
-	if (fn->irq_mask && fh->attention) {
+	if (fh->attention) {
 		bitmap_and(data->fn_irq_bits, data->irq_status, fn->irq_mask,
 				data->irq_count);
 		if (!bitmap_empty(data->fn_irq_bits, data->irq_count))
@@ -172,8 +172,7 @@
 	 * use irq_chip.
 	 */
 	list_for_each_entry(entry, &data->function_list, node)
-		if (entry->irq_mask)
-			process_one_interrupt(data, entry);
+		process_one_interrupt(data, entry);
 
 	if (data->input)
 		input_sync(data->input);
diff --git a/drivers/input/touchscreen/melfas_mip4.c b/drivers/input/touchscreen/melfas_mip4.c
index 89272973..fb5fb91 100644
--- a/drivers/input/touchscreen/melfas_mip4.c
+++ b/drivers/input/touchscreen/melfas_mip4.c
@@ -1310,8 +1310,34 @@
 
 static DEVICE_ATTR(fw_version, S_IRUGO, mip4_sysfs_read_fw_version, NULL);
 
+static ssize_t mip4_sysfs_read_hw_version(struct device *dev,
+					  struct device_attribute *attr,
+					  char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct mip4_ts *ts = i2c_get_clientdata(client);
+	size_t count;
+
+	/* Take lock to prevent racing with firmware update */
+	mutex_lock(&ts->input->mutex);
+
+	/*
+	 * product_name shows the name or version of the hardware
+	 * paired with current firmware in the chip.
+	 */
+	count = snprintf(buf, PAGE_SIZE, "%.*s\n",
+		(int)sizeof(ts->product_name), ts->product_name);
+
+	mutex_unlock(&ts->input->mutex);
+
+	return count;
+}
+
+static DEVICE_ATTR(hw_version, S_IRUGO, mip4_sysfs_read_hw_version, NULL);
+
 static struct attribute *mip4_attrs[] = {
 	&dev_attr_fw_version.attr,
+	&dev_attr_hw_version.attr,
 	&dev_attr_update_fw.attr,
 	NULL,
 };
@@ -1512,6 +1538,6 @@
 module_i2c_driver(mip4_driver);
 
 MODULE_DESCRIPTION("MELFAS MIP4 Touchscreen");
-MODULE_VERSION("2016.03.03");
+MODULE_VERSION("2016.03.12");
 MODULE_AUTHOR("Sangwon Jee <jeesw@melfas.com>");
 MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/sur40.c b/drivers/input/touchscreen/sur40.c
index b6c4d03..880c40b 100644
--- a/drivers/input/touchscreen/sur40.c
+++ b/drivers/input/touchscreen/sur40.c
@@ -197,28 +197,34 @@
 static int sur40_init(struct sur40_state *dev)
 {
 	int result;
-	u8 buffer[24];
+	u8 *buffer;
+
+	buffer = kmalloc(24, GFP_KERNEL);
+	if (!buffer) {
+		result = -ENOMEM;
+		goto error;
+	}
 
 	/* stupidly replay the original MS driver init sequence */
 	result = sur40_command(dev, SUR40_GET_VERSION, 0x00, buffer, 12);
 	if (result < 0)
-		return result;
+		goto error;
 
 	result = sur40_command(dev, SUR40_GET_VERSION, 0x01, buffer, 12);
 	if (result < 0)
-		return result;
+		goto error;
 
 	result = sur40_command(dev, SUR40_GET_VERSION, 0x02, buffer, 12);
 	if (result < 0)
-		return result;
+		goto error;
 
 	result = sur40_command(dev, SUR40_UNKNOWN2,    0x00, buffer, 24);
 	if (result < 0)
-		return result;
+		goto error;
 
 	result = sur40_command(dev, SUR40_UNKNOWN1,    0x00, buffer,  5);
 	if (result < 0)
-		return result;
+		goto error;
 
 	result = sur40_command(dev, SUR40_GET_VERSION, 0x03, buffer, 12);
 
@@ -226,7 +232,8 @@
 	 * Discard the result buffer - no known data inside except
 	 * some version strings, maybe extract these sometime...
 	 */
-
+error:
+	kfree(buffer);
 	return result;
 }