/*
 * MPC8548 CDS Device Tree Source
 *
 * Copyright 2006, 2008 Freescale Semiconductor Inc.
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 */

/include/ "fsl/mpc8548si-pre.dtsi"

/ {
	model = "MPC8548CDS";
	compatible = "MPC8548CDS", "MPC85xxCDS";

	aliases {
		ethernet0 = &enet0;
		ethernet1 = &enet1;
		ethernet2 = &enet2;
		ethernet3 = &enet3;
		serial0 = &serial0;
		serial1 = &serial1;
		pci0 = &pci0;
		pci1 = &pci1;
		pci2 = &pci2;
	};

	memory {
		device_type = "memory";
		reg = <0 0 0x0 0x8000000>;	// 128M at 0x0
	};

	lbc: localbus@e0005000 {
		reg = <0 0xe0005000 0 0x1000>;
	};

	soc: soc8548@e0000000 {
		ranges = <0 0x0 0xe0000000 0x100000>;

		i2c@3000 {
			eeprom@50 {
				compatible = "atmel,24c64";
				reg = <0x50>;
			};

			eeprom@56 {
				compatible = "atmel,24c64";
				reg = <0x56>;
			};

			eeprom@57 {
				compatible = "atmel,24c64";
				reg = <0x57>;
			};
		};

		i2c@3100 {
			eeprom@50 {
				compatible = "atmel,24c64";
				reg = <0x50>;
			};
		};

		enet0: ethernet@24000 {
			tbi-handle = <&tbi0>;
			phy-handle = <&phy0>;
		};

		mdio@24520 {
			phy0: ethernet-phy@0 {
				interrupts = <5 1 0 0>;
				reg = <0x0>;
				device_type = "ethernet-phy";
			};
			phy1: ethernet-phy@1 {
				interrupts = <5 1 0 0>;
				reg = <0x1>;
				device_type = "ethernet-phy";
			};
			phy2: ethernet-phy@2 {
				interrupts = <5 1 0 0>;
				reg = <0x2>;
				device_type = "ethernet-phy";
			};
			phy3: ethernet-phy@3 {
				interrupts = <5 1 0 0>;
				reg = <0x3>;
				device_type = "ethernet-phy";
			};
			tbi0: tbi-phy@11 {
				reg = <0x11>;
				device_type = "tbi-phy";
			};
		};

		enet1: ethernet@25000 {
			tbi-handle = <&tbi1>;
			phy-handle = <&phy1>;
		};

		mdio@25520 {
			tbi1: tbi-phy@11 {
				reg = <0x11>;
				device_type = "tbi-phy";
			};
		};

		enet2: ethernet@26000 {
			tbi-handle = <&tbi2>;
			phy-handle = <&phy2>;
		};

		mdio@26520 {
			tbi2: tbi-phy@11 {
				reg = <0x11>;
				device_type = "tbi-phy";
			};
		};

		enet3: ethernet@27000 {
			tbi-handle = <&tbi3>;
			phy-handle = <&phy3>;
		};

		mdio@27520 {
			tbi3: tbi-phy@11 {
				reg = <0x11>;
				device_type = "tbi-phy";
			};
		};
	};

	pci0: pci@e0008000 {
		reg = <0 0xe0008000 0 0x1000>;
		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x10000000
			  0x1000000 0x0 0x00000000 0 0xe2000000 0x0 0x800000>;
		clock-frequency = <66666666>;
		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
		interrupt-map = <
			/* IDSEL 0x4 (PCIX Slot 2) */
			0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
			0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
			0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
			0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0

			/* IDSEL 0x5 (PCIX Slot 3) */
			0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
			0x2800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
			0x2800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
			0x2800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0

			/* IDSEL 0x6 (PCIX Slot 4) */
			0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
			0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
			0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
			0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0

			/* IDSEL 0x8 (PCIX Slot 5) */
			0x4000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
			0x4000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
			0x4000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
			0x4000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0

			/* IDSEL 0xC (Tsi310 bridge) */
			0x6000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
			0x6000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
			0x6000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
			0x6000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0

			/* IDSEL 0x14 (Slot 2) */
			0xa000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
			0xa000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
			0xa000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
			0xa000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0

			/* IDSEL 0x15 (Slot 3) */
			0xa800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
			0xa800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
			0xa800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
			0xa800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0

			/* IDSEL 0x16 (Slot 4) */
			0xb000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
			0xb000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
			0xb000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
			0xb000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0

			/* IDSEL 0x18 (Slot 5) */
			0xc000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
			0xc000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
			0xc000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
			0xc000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0

			/* IDSEL 0x1C (Tsi310 bridge PCI primary) */
			0xe000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
			0xe000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
			0xe000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
			0xe000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;

		pci_bridge@1c {
			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
			interrupt-map = <

				/* IDSEL 0x00 (PrPMC Site) */
				0000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
				0000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
				0000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
				0000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0

				/* IDSEL 0x04 (VIA chip) */
				0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
				0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
				0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
				0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0

				/* IDSEL 0x05 (8139) */
				0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0

				/* IDSEL 0x06 (Slot 6) */
				0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
				0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
				0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
				0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0

				/* IDESL 0x07 (Slot 7) */
				0x3800 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
				0x3800 0x0 0x0 0x2 &mpic 0x0 0x1 0 0
				0x3800 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
				0x3800 0x0 0x0 0x4 &mpic 0x2 0x1 0 0>;

			reg = <0xe000 0x0 0x0 0x0 0x0>;
			#interrupt-cells = <1>;
			#size-cells = <2>;
			#address-cells = <3>;
			ranges = <0x2000000 0x0 0x80000000
				  0x2000000 0x0 0x80000000
				  0x0 0x20000000
				  0x1000000 0x0 0x0
				  0x1000000 0x0 0x0
				  0x0 0x80000>;
			clock-frequency = <33333333>;

			isa@4 {
				device_type = "isa";
				#interrupt-cells = <2>;
				#size-cells = <1>;
				#address-cells = <2>;
				reg = <0x2000 0x0 0x0 0x0 0x0>;
				ranges = <0x1 0x0 0x1000000 0x0 0x0 0x1000>;
				interrupt-parent = <&i8259>;

				i8259: interrupt-controller@20 {
					interrupt-controller;
					device_type = "interrupt-controller";
					reg = <0x1 0x20 0x2
					       0x1 0xa0 0x2
					       0x1 0x4d0 0x2>;
					#address-cells = <0>;
					#interrupt-cells = <2>;
					compatible = "chrp,iic";
					interrupts = <0 1 0 0>;
					interrupt-parent = <&mpic>;
				};

				rtc@70 {
					compatible = "pnpPNP,b00";
					reg = <0x1 0x70 0x2>;
				};
			};
		};
	};

	pci1: pci@e0009000 {
		reg = <0 0xe0009000 0 0x1000>;
		ranges = <0x2000000 0x0 0x90000000 0 0x90000000 0x0 0x10000000
			  0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x800000>;
		clock-frequency = <66666666>;
		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
		interrupt-map = <

			/* IDSEL 0x15 */
			0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0
			0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
			0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
			0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
	};

	pci2: pcie@e000a000 {
		reg = <0 0xe000a000 0 0x1000>;
		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
			  0x1000000 0x0 0x00000000 0 0xe3000000 0x0 0x100000>;
		pcie@0 {
			ranges = <0x2000000 0x0 0xa0000000
				  0x2000000 0x0 0xa0000000
				  0x0 0x20000000

				  0x1000000 0x0 0x0
				  0x1000000 0x0 0x0
				  0x0 0x100000>;
		};
	};
};

/include/ "fsl/mpc8548si-post.dtsi"