blob: e850bd71a8ce36213691f03c4f25764e2e21fb08 [file] [log] [blame]
#ifdef CONFIG_SMP
#include "sched-pelt.h"
int __update_load_avg_blocked_se(u64 now, struct sched_entity *se);
int __update_load_avg_se(u64 now, struct cfs_rq *cfs_rq, struct sched_entity *se);
int __update_load_avg_cfs_rq(u64 now, struct cfs_rq *cfs_rq);
int update_rt_rq_load_avg(u64 now, struct rq *rq, int running);
int update_dl_rq_load_avg(u64 now, struct rq *rq, int running);
#ifdef CONFIG_SCHED_THERMAL_PRESSURE
int update_thermal_load_avg(u64 now, struct rq *rq, u64 capacity);
static inline u64 thermal_load_avg(struct rq *rq)
{
return READ_ONCE(rq->avg_thermal.load_avg);
}
#else
static inline int
update_thermal_load_avg(u64 now, struct rq *rq, u64 capacity)
{
return 0;
}
static inline u64 thermal_load_avg(struct rq *rq)
{
return 0;
}
#endif
#ifdef CONFIG_HAVE_SCHED_AVG_IRQ
int update_irq_load_avg(struct rq *rq, u64 running);
#else
static inline int
update_irq_load_avg(struct rq *rq, u64 running)
{
return 0;
}
#endif
static inline u32 get_pelt_divider(struct sched_avg *avg)
{
return LOAD_AVG_MAX - 1024 + avg->period_contrib;
}
/*
* When a task is dequeued, its estimated utilization should not be update if
* its util_avg has not been updated at least once.
* This flag is used to synchronize util_avg updates with util_est updates.
* We map this information into the LSB bit of the utilization saved at
* dequeue time (i.e. util_est.dequeued).
*/
#define UTIL_AVG_UNCHANGED 0x1
static inline void cfs_se_util_change(struct sched_avg *avg)
{
unsigned int enqueued;
if (!sched_feat(UTIL_EST))
return;
/* Avoid store if the flag has been already set */
enqueued = avg->util_est.enqueued;
if (!(enqueued & UTIL_AVG_UNCHANGED))
return;
/* Reset flag to report util_avg has been updated */
enqueued &= ~UTIL_AVG_UNCHANGED;
WRITE_ONCE(avg->util_est.enqueued, enqueued);
}
/*
* The clock_pelt scales the time to reflect the effective amount of
* computation done during the running delta time but then sync back to
* clock_task when rq is idle.
*
*
* absolute time | 1| 2| 3| 4| 5| 6| 7| 8| 9|10|11|12|13|14|15|16
* @ max capacity ------******---------------******---------------
* @ half capacity ------************---------************---------
* clock pelt | 1| 2| 3| 4| 7| 8| 9| 10| 11|14|15|16
*
*/
static inline void update_rq_clock_pelt(struct rq *rq, s64 delta)
{
if (unlikely(is_idle_task(rq->curr))) {
/* The rq is idle, we can sync to clock_task */
rq->clock_pelt = rq_clock_task(rq);
return;
}
/*
* When a rq runs at a lower compute capacity, it will need
* more time to do the same amount of work than at max
* capacity. In order to be invariant, we scale the delta to
* reflect how much work has been really done.
* Running longer results in stealing idle time that will
* disturb the load signal compared to max capacity. This
* stolen idle time will be automatically reflected when the
* rq will be idle and the clock will be synced with
* rq_clock_task.
*/
/*
* Scale the elapsed time to reflect the real amount of
* computation
*/
delta = cap_scale(delta, arch_scale_cpu_capacity(cpu_of(rq)));
delta = cap_scale(delta, arch_scale_freq_capacity(cpu_of(rq)));
rq->clock_pelt += delta;
}
/*
* When rq becomes idle, we have to check if it has lost idle time
* because it was fully busy. A rq is fully used when the /Sum util_sum
* is greater or equal to:
* (LOAD_AVG_MAX - 1024 + rq->cfs.avg.period_contrib) << SCHED_CAPACITY_SHIFT;
* For optimization and computing rounding purpose, we don't take into account
* the position in the current window (period_contrib) and we use the higher
* bound of util_sum to decide.
*/
static inline void update_idle_rq_clock_pelt(struct rq *rq)
{
u32 divider = ((LOAD_AVG_MAX - 1024) << SCHED_CAPACITY_SHIFT) - LOAD_AVG_MAX;
u32 util_sum = rq->cfs.avg.util_sum;
util_sum += rq->avg_rt.util_sum;
util_sum += rq->avg_dl.util_sum;
/*
* Reflecting stolen time makes sense only if the idle
* phase would be present at max capacity. As soon as the
* utilization of a rq has reached the maximum value, it is
* considered as an always runnig rq without idle time to
* steal. This potential idle time is considered as lost in
* this case. We keep track of this lost idle time compare to
* rq's clock_task.
*/
if (util_sum >= divider)
rq->lost_idle_time += rq_clock_task(rq) - rq->clock_pelt;
}
static inline u64 rq_clock_pelt(struct rq *rq)
{
lockdep_assert_held(rq_lockp(rq));
assert_clock_updated(rq);
return rq->clock_pelt - rq->lost_idle_time;
}
#ifdef CONFIG_CFS_BANDWIDTH
/* rq->task_clock normalized against any time this cfs_rq has spent throttled */
static inline u64 cfs_rq_clock_pelt(struct cfs_rq *cfs_rq)
{
if (unlikely(cfs_rq->throttle_count))
return cfs_rq->throttled_clock_task - cfs_rq->throttled_clock_task_time;
return rq_clock_pelt(rq_of(cfs_rq)) - cfs_rq->throttled_clock_task_time;
}
#else
static inline u64 cfs_rq_clock_pelt(struct cfs_rq *cfs_rq)
{
return rq_clock_pelt(rq_of(cfs_rq));
}
#endif
#else
static inline int
update_cfs_rq_load_avg(u64 now, struct cfs_rq *cfs_rq)
{
return 0;
}
static inline int
update_rt_rq_load_avg(u64 now, struct rq *rq, int running)
{
return 0;
}
static inline int
update_dl_rq_load_avg(u64 now, struct rq *rq, int running)
{
return 0;
}
static inline int
update_thermal_load_avg(u64 now, struct rq *rq, u64 capacity)
{
return 0;
}
static inline u64 thermal_load_avg(struct rq *rq)
{
return 0;
}
static inline int
update_irq_load_avg(struct rq *rq, u64 running)
{
return 0;
}
static inline u64 rq_clock_pelt(struct rq *rq)
{
return rq_clock_task(rq);
}
static inline void
update_rq_clock_pelt(struct rq *rq, s64 delta) { }
static inline void
update_idle_rq_clock_pelt(struct rq *rq) { }
#endif