blob: a7b2a600d0a4d0aa7878a633eb3549f0a0d3a373 [file] [log] [blame]
/*
* MPC83xx/85xx/86xx PCI/PCIE support routing.
*
* Copyright 2007-2012 Freescale Semiconductor, Inc.
* Copyright 2008-2009 MontaVista Software, Inc.
*
* Initial author: Xianghua Xiao <x.xiao@freescale.com>
* Recode: ZHANG WEI <wei.zhang@freescale.com>
* Rewrite the routing for Frescale PCI and PCI Express
* Roy Zang <tie-fei.zang@freescale.com>
* MPC83xx PCI-Express support:
* Tony Li <tony.li@freescale.com>
* Anton Vorontsov <avorontsov@ru.mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/bootmem.h>
#include <linux/memblock.h>
#include <linux/log2.h>
#include <linux/slab.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/pci-bridge.h>
#include <asm/machdep.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
static int fsl_pcie_bus_fixup, is_mpc83xx_pci;
static void __devinit quirk_fsl_pcie_header(struct pci_dev *dev)
{
u8 progif;
/* if we aren't a PCIe don't bother */
if (!pci_find_capability(dev, PCI_CAP_ID_EXP))
return;
/* if we aren't in host mode don't bother */
pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
if (progif & 0x1)
return;
dev->class = PCI_CLASS_BRIDGE_PCI << 8;
fsl_pcie_bus_fixup = 1;
return;
}
static int __init fsl_pcie_check_link(struct pci_controller *hose)
{
u32 val;
early_read_config_dword(hose, 0, 0, PCIE_LTSSM, &val);
if (val < PCIE_LTSSM_L0)
return 1;
return 0;
}
#if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx)
#define MAX_PHYS_ADDR_BITS 40
static u64 pci64_dma_offset = 1ull << MAX_PHYS_ADDR_BITS;
static int fsl_pci_dma_set_mask(struct device *dev, u64 dma_mask)
{
if (!dev->dma_mask || !dma_supported(dev, dma_mask))
return -EIO;
/*
* Fixup PCI devices that are able to DMA to above the physical
* address width of the SoC such that we can address any internal
* SoC address from across PCI if needed
*/
if ((dev->bus == &pci_bus_type) &&
dma_mask >= DMA_BIT_MASK(MAX_PHYS_ADDR_BITS)) {
set_dma_ops(dev, &dma_direct_ops);
set_dma_offset(dev, pci64_dma_offset);
}
*dev->dma_mask = dma_mask;
return 0;
}
static int __init setup_one_atmu(struct ccsr_pci __iomem *pci,
unsigned int index, const struct resource *res,
resource_size_t offset)
{
resource_size_t pci_addr = res->start - offset;
resource_size_t phys_addr = res->start;
resource_size_t size = resource_size(res);
u32 flags = 0x80044000; /* enable & mem R/W */
unsigned int i;
pr_debug("PCI MEM resource start 0x%016llx, size 0x%016llx.\n",
(u64)res->start, (u64)size);
if (res->flags & IORESOURCE_PREFETCH)
flags |= 0x10000000; /* enable relaxed ordering */
for (i = 0; size > 0; i++) {
unsigned int bits = min(__ilog2(size),
__ffs(pci_addr | phys_addr));
if (index + i >= 5)
return -1;
out_be32(&pci->pow[index + i].potar, pci_addr >> 12);
out_be32(&pci->pow[index + i].potear, (u64)pci_addr >> 44);
out_be32(&pci->pow[index + i].powbar, phys_addr >> 12);
out_be32(&pci->pow[index + i].powar, flags | (bits - 1));
pci_addr += (resource_size_t)1U << bits;
phys_addr += (resource_size_t)1U << bits;
size -= (resource_size_t)1U << bits;
}
return i;
}
/* atmu setup for fsl pci/pcie controller */
static void __init setup_pci_atmu(struct pci_controller *hose,
struct resource *rsrc)
{
struct ccsr_pci __iomem *pci;
int i, j, n, mem_log, win_idx = 3, start_idx = 1, end_idx = 4;
u64 mem, sz, paddr_hi = 0;
u64 paddr_lo = ULLONG_MAX;
u32 pcicsrbar = 0, pcicsrbar_sz;
u32 piwar = PIWAR_EN | PIWAR_PF | PIWAR_TGI_LOCAL |
PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP;
char *name = hose->dn->full_name;
const u64 *reg;
int len;
pr_debug("PCI memory map start 0x%016llx, size 0x%016llx\n",
(u64)rsrc->start, (u64)resource_size(rsrc));
if (of_device_is_compatible(hose->dn, "fsl,qoriq-pcie-v2.2")) {
win_idx = 2;
start_idx = 0;
end_idx = 3;
}
pci = ioremap(rsrc->start, resource_size(rsrc));
if (!pci) {
dev_err(hose->parent, "Unable to map ATMU registers\n");
return;
}
/* Disable all windows (except powar0 since it's ignored) */
for(i = 1; i < 5; i++)
out_be32(&pci->pow[i].powar, 0);
for (i = start_idx; i < end_idx; i++)
out_be32(&pci->piw[i].piwar, 0);
/* Setup outbound MEM window */
for(i = 0, j = 1; i < 3; i++) {
if (!(hose->mem_resources[i].flags & IORESOURCE_MEM))
continue;
paddr_lo = min(paddr_lo, (u64)hose->mem_resources[i].start);
paddr_hi = max(paddr_hi, (u64)hose->mem_resources[i].end);
n = setup_one_atmu(pci, j, &hose->mem_resources[i],
hose->pci_mem_offset);
if (n < 0 || j >= 5) {
pr_err("Ran out of outbound PCI ATMUs for resource %d!\n", i);
hose->mem_resources[i].flags |= IORESOURCE_DISABLED;
} else
j += n;
}
/* Setup outbound IO window */
if (hose->io_resource.flags & IORESOURCE_IO) {
if (j >= 5) {
pr_err("Ran out of outbound PCI ATMUs for IO resource\n");
} else {
pr_debug("PCI IO resource start 0x%016llx, size 0x%016llx, "
"phy base 0x%016llx.\n",
(u64)hose->io_resource.start,
(u64)resource_size(&hose->io_resource),
(u64)hose->io_base_phys);
out_be32(&pci->pow[j].potar, (hose->io_resource.start >> 12));
out_be32(&pci->pow[j].potear, 0);
out_be32(&pci->pow[j].powbar, (hose->io_base_phys >> 12));
/* Enable, IO R/W */
out_be32(&pci->pow[j].powar, 0x80088000
| (__ilog2(hose->io_resource.end
- hose->io_resource.start + 1) - 1));
}
}
/* convert to pci address space */
paddr_hi -= hose->pci_mem_offset;
paddr_lo -= hose->pci_mem_offset;
if (paddr_hi == paddr_lo) {
pr_err("%s: No outbound window space\n", name);
goto out;
}
if (paddr_lo == 0) {
pr_err("%s: No space for inbound window\n", name);
goto out;
}
/* setup PCSRBAR/PEXCSRBAR */
early_write_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, 0xffffffff);
early_read_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, &pcicsrbar_sz);
pcicsrbar_sz = ~pcicsrbar_sz + 1;
if (paddr_hi < (0x100000000ull - pcicsrbar_sz) ||
(paddr_lo > 0x100000000ull))
pcicsrbar = 0x100000000ull - pcicsrbar_sz;
else
pcicsrbar = (paddr_lo - pcicsrbar_sz) & -pcicsrbar_sz;
early_write_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, pcicsrbar);
paddr_lo = min(paddr_lo, (u64)pcicsrbar);
pr_info("%s: PCICSRBAR @ 0x%x\n", name, pcicsrbar);
/* Setup inbound mem window */
mem = memblock_end_of_DRAM();
/*
* The msi-address-64 property, if it exists, indicates the physical
* address of the MSIIR register. Normally, this register is located
* inside CCSR, so the ATMU that covers all of CCSR is used. But if
* this property exists, then we normally need to create a new ATMU
* for it. For now, however, we cheat. The only entity that creates
* this property is the Freescale hypervisor, and the address is
* specified in the partition configuration. Typically, the address
* is located in the page immediately after the end of DDR. If so, we
* can avoid allocating a new ATMU by extending the DDR ATMU by one
* page.
*/
reg = of_get_property(hose->dn, "msi-address-64", &len);
if (reg && (len == sizeof(u64))) {
u64 address = be64_to_cpup(reg);
if ((address >= mem) && (address < (mem + PAGE_SIZE))) {
pr_info("%s: extending DDR ATMU to cover MSIIR", name);
mem += PAGE_SIZE;
} else {
/* TODO: Create a new ATMU for MSIIR */
pr_warn("%s: msi-address-64 address of %llx is "
"unsupported\n", name, address);
}
}
sz = min(mem, paddr_lo);
mem_log = __ilog2_u64(sz);
/* PCIe can overmap inbound & outbound since RX & TX are separated */
if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
/* Size window to exact size if power-of-two or one size up */
if ((1ull << mem_log) != mem) {
if ((1ull << mem_log) > mem)
pr_info("%s: Setting PCI inbound window "
"greater than memory size\n", name);
mem_log++;
}
piwar |= ((mem_log - 1) & PIWAR_SZ_MASK);
/* Setup inbound memory window */
out_be32(&pci->piw[win_idx].pitar, 0x00000000);
out_be32(&pci->piw[win_idx].piwbar, 0x00000000);
out_be32(&pci->piw[win_idx].piwar, piwar);
win_idx--;
hose->dma_window_base_cur = 0x00000000;
hose->dma_window_size = (resource_size_t)sz;
/*
* if we have >4G of memory setup second PCI inbound window to
* let devices that are 64-bit address capable to work w/o
* SWIOTLB and access the full range of memory
*/
if (sz != mem) {
mem_log = __ilog2_u64(mem);
/* Size window up if we dont fit in exact power-of-2 */
if ((1ull << mem_log) != mem)
mem_log++;
piwar = (piwar & ~PIWAR_SZ_MASK) | (mem_log - 1);
/* Setup inbound memory window */
out_be32(&pci->piw[win_idx].pitar, 0x00000000);
out_be32(&pci->piw[win_idx].piwbear,
pci64_dma_offset >> 44);
out_be32(&pci->piw[win_idx].piwbar,
pci64_dma_offset >> 12);
out_be32(&pci->piw[win_idx].piwar, piwar);
/*
* install our own dma_set_mask handler to fixup dma_ops
* and dma_offset
*/
ppc_md.dma_set_mask = fsl_pci_dma_set_mask;
pr_info("%s: Setup 64-bit PCI DMA window\n", name);
}
} else {
u64 paddr = 0;
/* Setup inbound memory window */
out_be32(&pci->piw[win_idx].pitar, paddr >> 12);
out_be32(&pci->piw[win_idx].piwbar, paddr >> 12);
out_be32(&pci->piw[win_idx].piwar, (piwar | (mem_log - 1)));
win_idx--;
paddr += 1ull << mem_log;
sz -= 1ull << mem_log;
if (sz) {
mem_log = __ilog2_u64(sz);
piwar |= (mem_log - 1);
out_be32(&pci->piw[win_idx].pitar, paddr >> 12);
out_be32(&pci->piw[win_idx].piwbar, paddr >> 12);
out_be32(&pci->piw[win_idx].piwar, piwar);
win_idx--;
paddr += 1ull << mem_log;
}
hose->dma_window_base_cur = 0x00000000;
hose->dma_window_size = (resource_size_t)paddr;
}
if (hose->dma_window_size < mem) {
#ifndef CONFIG_SWIOTLB
pr_err("%s: ERROR: Memory size exceeds PCI ATMU ability to "
"map - enable CONFIG_SWIOTLB to avoid dma errors.\n",
name);
#endif
/* adjusting outbound windows could reclaim space in mem map */
if (paddr_hi < 0xffffffffull)
pr_warning("%s: WARNING: Outbound window cfg leaves "
"gaps in memory map. Adjusting the memory map "
"could reduce unnecessary bounce buffering.\n",
name);
pr_info("%s: DMA window size is 0x%llx\n", name,
(u64)hose->dma_window_size);
}
out:
iounmap(pci);
}
static void __init setup_pci_cmd(struct pci_controller *hose)
{
u16 cmd;
int cap_x;
early_read_config_word(hose, 0, 0, PCI_COMMAND, &cmd);
cmd |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY
| PCI_COMMAND_IO;
early_write_config_word(hose, 0, 0, PCI_COMMAND, cmd);
cap_x = early_find_capability(hose, 0, 0, PCI_CAP_ID_PCIX);
if (cap_x) {
int pci_x_cmd = cap_x + PCI_X_CMD;
cmd = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ
| PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
early_write_config_word(hose, 0, 0, pci_x_cmd, cmd);
} else {
early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0x80);
}
}
void fsl_pcibios_fixup_bus(struct pci_bus *bus)
{
struct pci_controller *hose = pci_bus_to_host(bus);
int i, is_pcie = 0, no_link;
/* The root complex bridge comes up with bogus resources,
* we copy the PHB ones in.
*
* With the current generic PCI code, the PHB bus no longer
* has bus->resource[0..4] set, so things are a bit more
* tricky.
*/
if (fsl_pcie_bus_fixup)
is_pcie = early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP);
no_link = !!(hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK);
if (bus->parent == hose->bus && (is_pcie || no_link)) {
for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; ++i) {
struct resource *res = bus->resource[i];
struct resource *par;
if (!res)
continue;
if (i == 0)
par = &hose->io_resource;
else if (i < 4)
par = &hose->mem_resources[i-1];
else par = NULL;
res->start = par ? par->start : 0;
res->end = par ? par->end : 0;
res->flags = par ? par->flags : 0;
}
}
}
int __init fsl_add_bridge(struct device_node *dev, int is_primary)
{
int len;
struct pci_controller *hose;
struct resource rsrc;
const int *bus_range;
u8 progif;
if (!of_device_is_available(dev)) {
pr_warning("%s: disabled\n", dev->full_name);
return -ENODEV;
}
pr_debug("Adding PCI host bridge %s\n", dev->full_name);
/* Fetch host bridge registers address */
if (of_address_to_resource(dev, 0, &rsrc)) {
printk(KERN_WARNING "Can't get pci register base!");
return -ENOMEM;
}
/* Get bus range if any */
bus_range = of_get_property(dev, "bus-range", &len);
if (bus_range == NULL || len < 2 * sizeof(int))
printk(KERN_WARNING "Can't get bus-range for %s, assume"
" bus 0\n", dev->full_name);
pci_add_flags(PCI_REASSIGN_ALL_BUS);
hose = pcibios_alloc_controller(dev);
if (!hose)
return -ENOMEM;
hose->first_busno = bus_range ? bus_range[0] : 0x0;
hose->last_busno = bus_range ? bus_range[1] : 0xff;
setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4,
PPC_INDIRECT_TYPE_BIG_ENDIAN);
early_read_config_byte(hose, 0, 0, PCI_CLASS_PROG, &progif);
if ((progif & 1) == 1) {
/* unmap cfg_data & cfg_addr separately if not on same page */
if (((unsigned long)hose->cfg_data & PAGE_MASK) !=
((unsigned long)hose->cfg_addr & PAGE_MASK))
iounmap(hose->cfg_data);
iounmap(hose->cfg_addr);
pcibios_free_controller(hose);
return 0;
}
setup_pci_cmd(hose);
/* check PCI express link status */
if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
hose->indirect_type |= PPC_INDIRECT_TYPE_EXT_REG |
PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS;
if (fsl_pcie_check_link(hose))
hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK;
}
printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. "
"Firmware bus number: %d->%d\n",
(unsigned long long)rsrc.start, hose->first_busno,
hose->last_busno);
pr_debug(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
hose, hose->cfg_addr, hose->cfg_data);
/* Interpret the "ranges" property */
/* This also maps the I/O region and sets isa_io/mem_base */
pci_process_bridge_OF_ranges(hose, dev, is_primary);
/* Setup PEX window registers */
setup_pci_atmu(hose, &rsrc);
return 0;
}
#endif /* CONFIG_FSL_SOC_BOOKE || CONFIG_PPC_86xx */
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID, quirk_fsl_pcie_header);
#if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x)
struct mpc83xx_pcie_priv {
void __iomem *cfg_type0;
void __iomem *cfg_type1;
u32 dev_base;
};
struct pex_inbound_window {
u32 ar;
u32 tar;
u32 barl;
u32 barh;
};
/*
* With the convention of u-boot, the PCIE outbound window 0 serves
* as configuration transactions outbound.
*/
#define PEX_OUTWIN0_BAR 0xCA4
#define PEX_OUTWIN0_TAL 0xCA8
#define PEX_OUTWIN0_TAH 0xCAC
#define PEX_RC_INWIN_BASE 0xE60
#define PEX_RCIWARn_EN 0x1
static int mpc83xx_pcie_exclude_device(struct pci_bus *bus, unsigned int devfn)
{
struct pci_controller *hose = pci_bus_to_host(bus);
if (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK)
return PCIBIOS_DEVICE_NOT_FOUND;
/*
* Workaround for the HW bug: for Type 0 configure transactions the
* PCI-E controller does not check the device number bits and just
* assumes that the device number bits are 0.
*/
if (bus->number == hose->first_busno ||
bus->primary == hose->first_busno) {
if (devfn & 0xf8)
return PCIBIOS_DEVICE_NOT_FOUND;
}
if (ppc_md.pci_exclude_device) {
if (ppc_md.pci_exclude_device(hose, bus->number, devfn))
return PCIBIOS_DEVICE_NOT_FOUND;
}
return PCIBIOS_SUCCESSFUL;
}
static void __iomem *mpc83xx_pcie_remap_cfg(struct pci_bus *bus,
unsigned int devfn, int offset)
{
struct pci_controller *hose = pci_bus_to_host(bus);
struct mpc83xx_pcie_priv *pcie = hose->dn->data;
u32 dev_base = bus->number << 24 | devfn << 16;
int ret;
ret = mpc83xx_pcie_exclude_device(bus, devfn);
if (ret)
return NULL;
offset &= 0xfff;
/* Type 0 */
if (bus->number == hose->first_busno)
return pcie->cfg_type0 + offset;
if (pcie->dev_base == dev_base)
goto mapped;
out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAL, dev_base);
pcie->dev_base = dev_base;
mapped:
return pcie->cfg_type1 + offset;
}
static int mpc83xx_pcie_read_config(struct pci_bus *bus, unsigned int devfn,
int offset, int len, u32 *val)
{
void __iomem *cfg_addr;
cfg_addr = mpc83xx_pcie_remap_cfg(bus, devfn, offset);
if (!cfg_addr)
return PCIBIOS_DEVICE_NOT_FOUND;
switch (len) {
case 1:
*val = in_8(cfg_addr);
break;
case 2:
*val = in_le16(cfg_addr);
break;
default:
*val = in_le32(cfg_addr);
break;
}
return PCIBIOS_SUCCESSFUL;
}
static int mpc83xx_pcie_write_config(struct pci_bus *bus, unsigned int devfn,
int offset, int len, u32 val)
{
struct pci_controller *hose = pci_bus_to_host(bus);
void __iomem *cfg_addr;
cfg_addr = mpc83xx_pcie_remap_cfg(bus, devfn, offset);
if (!cfg_addr)
return PCIBIOS_DEVICE_NOT_FOUND;
/* PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS */
if (offset == PCI_PRIMARY_BUS && bus->number == hose->first_busno)
val &= 0xffffff00;
switch (len) {
case 1:
out_8(cfg_addr, val);
break;
case 2:
out_le16(cfg_addr, val);
break;
default:
out_le32(cfg_addr, val);
break;
}
return PCIBIOS_SUCCESSFUL;
}
static struct pci_ops mpc83xx_pcie_ops = {
.read = mpc83xx_pcie_read_config,
.write = mpc83xx_pcie_write_config,
};
static int __init mpc83xx_pcie_setup(struct pci_controller *hose,
struct resource *reg)
{
struct mpc83xx_pcie_priv *pcie;
u32 cfg_bar;
int ret = -ENOMEM;
pcie = zalloc_maybe_bootmem(sizeof(*pcie), GFP_KERNEL);
if (!pcie)
return ret;
pcie->cfg_type0 = ioremap(reg->start, resource_size(reg));
if (!pcie->cfg_type0)
goto err0;
cfg_bar = in_le32(pcie->cfg_type0 + PEX_OUTWIN0_BAR);
if (!cfg_bar) {
/* PCI-E isn't configured. */
ret = -ENODEV;
goto err1;
}
pcie->cfg_type1 = ioremap(cfg_bar, 0x1000);
if (!pcie->cfg_type1)
goto err1;
WARN_ON(hose->dn->data);
hose->dn->data = pcie;
hose->ops = &mpc83xx_pcie_ops;
out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAH, 0);
out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAL, 0);
if (fsl_pcie_check_link(hose))
hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK;
return 0;
err1:
iounmap(pcie->cfg_type0);
err0:
kfree(pcie);
return ret;
}
int __init mpc83xx_add_bridge(struct device_node *dev)
{
int ret;
int len;
struct pci_controller *hose;
struct resource rsrc_reg;
struct resource rsrc_cfg;
const int *bus_range;
int primary;
is_mpc83xx_pci = 1;
if (!of_device_is_available(dev)) {
pr_warning("%s: disabled by the firmware.\n",
dev->full_name);
return -ENODEV;
}
pr_debug("Adding PCI host bridge %s\n", dev->full_name);
/* Fetch host bridge registers address */
if (of_address_to_resource(dev, 0, &rsrc_reg)) {
printk(KERN_WARNING "Can't get pci register base!\n");
return -ENOMEM;
}
memset(&rsrc_cfg, 0, sizeof(rsrc_cfg));
if (of_address_to_resource(dev, 1, &rsrc_cfg)) {
printk(KERN_WARNING
"No pci config register base in dev tree, "
"using default\n");
/*
* MPC83xx supports up to two host controllers
* one at 0x8500 has config space registers at 0x8300
* one at 0x8600 has config space registers at 0x8380
*/
if ((rsrc_reg.start & 0xfffff) == 0x8500)
rsrc_cfg.start = (rsrc_reg.start & 0xfff00000) + 0x8300;
else if ((rsrc_reg.start & 0xfffff) == 0x8600)
rsrc_cfg.start = (rsrc_reg.start & 0xfff00000) + 0x8380;
}
/*
* Controller at offset 0x8500 is primary
*/
if ((rsrc_reg.start & 0xfffff) == 0x8500)
primary = 1;
else
primary = 0;
/* Get bus range if any */
bus_range = of_get_property(dev, "bus-range", &len);
if (bus_range == NULL || len < 2 * sizeof(int)) {
printk(KERN_WARNING "Can't get bus-range for %s, assume"
" bus 0\n", dev->full_name);
}
pci_add_flags(PCI_REASSIGN_ALL_BUS);
hose = pcibios_alloc_controller(dev);
if (!hose)
return -ENOMEM;
hose->first_busno = bus_range ? bus_range[0] : 0;
hose->last_busno = bus_range ? bus_range[1] : 0xff;
if (of_device_is_compatible(dev, "fsl,mpc8314-pcie")) {
ret = mpc83xx_pcie_setup(hose, &rsrc_reg);
if (ret)
goto err0;
} else {
setup_indirect_pci(hose, rsrc_cfg.start,
rsrc_cfg.start + 4, 0);
}
printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. "
"Firmware bus number: %d->%d\n",
(unsigned long long)rsrc_reg.start, hose->first_busno,
hose->last_busno);
pr_debug(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
hose, hose->cfg_addr, hose->cfg_data);
/* Interpret the "ranges" property */
/* This also maps the I/O region and sets isa_io/mem_base */
pci_process_bridge_OF_ranges(hose, dev, primary);
return 0;
err0:
pcibios_free_controller(hose);
return ret;
}
#endif /* CONFIG_PPC_83xx */
u64 fsl_pci_immrbar_base(struct pci_controller *hose)
{
#ifdef CONFIG_PPC_83xx
if (is_mpc83xx_pci) {
struct mpc83xx_pcie_priv *pcie = hose->dn->data;
struct pex_inbound_window *in;
int i;
/* Walk the Root Complex Inbound windows to match IMMR base */
in = pcie->cfg_type0 + PEX_RC_INWIN_BASE;
for (i = 0; i < 4; i++) {
/* not enabled, skip */
if (!in_le32(&in[i].ar) & PEX_RCIWARn_EN)
continue;
if (get_immrbase() == in_le32(&in[i].tar))
return (u64)in_le32(&in[i].barh) << 32 |
in_le32(&in[i].barl);
}
printk(KERN_WARNING "could not find PCI BAR matching IMMR\n");
}
#endif
#if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx)
if (!is_mpc83xx_pci) {
u32 base;
pci_bus_read_config_dword(hose->bus,
PCI_DEVFN(0, 0), PCI_BASE_ADDRESS_0, &base);
return base;
}
#endif
return 0;
}
#if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx)
static const struct of_device_id pci_ids[] = {
{ .compatible = "fsl,mpc8540-pci", },
{ .compatible = "fsl,mpc8548-pcie", },
{ .compatible = "fsl,mpc8610-pci", },
{ .compatible = "fsl,mpc8641-pcie", },
{ .compatible = "fsl,p1022-pcie", },
{ .compatible = "fsl,p1010-pcie", },
{ .compatible = "fsl,p1023-pcie", },
{ .compatible = "fsl,p4080-pcie", },
{ .compatible = "fsl,qoriq-pcie-v2.3", },
{ .compatible = "fsl,qoriq-pcie-v2.2", },
{},
};
struct device_node *fsl_pci_primary;
void __devinit fsl_pci_init(void)
{
struct device_node *node;
struct pci_controller *hose;
dma_addr_t max = 0xffffffff;
/* Callers can specify the primary bus using other means. */
if (!fsl_pci_primary) {
/* If a PCI host bridge contains an ISA node, it's primary. */
node = of_find_node_by_type(NULL, "isa");
while ((fsl_pci_primary = of_get_parent(node))) {
of_node_put(node);
node = fsl_pci_primary;
if (of_match_node(pci_ids, node))
break;
}
}
node = NULL;
for_each_node_by_type(node, "pci") {
if (of_match_node(pci_ids, node)) {
/*
* If there's no PCI host bridge with ISA, arbitrarily
* designate one as primary. This can go away once
* various bugs with primary-less systems are fixed.
*/
if (!fsl_pci_primary)
fsl_pci_primary = node;
fsl_add_bridge(node, fsl_pci_primary == node);
hose = pci_find_hose_for_OF_device(node);
max = min(max, hose->dma_window_base_cur +
hose->dma_window_size);
}
}
#ifdef CONFIG_SWIOTLB
/*
* if we couldn't map all of DRAM via the dma windows
* we need SWIOTLB to handle buffers located outside of
* dma capable memory region
*/
if (memblock_end_of_DRAM() - 1 > max) {
ppc_swiotlb_enable = 1;
set_pci_dma_ops(&swiotlb_dma_ops);
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
}
#endif
}
#endif