| /* |
| * m54xxsim.h -- ColdFire 547x/548x System Integration Unit support. |
| */ |
| |
| #ifndef m54xxsim_h |
| #define m54xxsim_h |
| |
| #define CPU_NAME "COLDFIRE(m54xx)" |
| #define CPU_INSTR_PER_JIFFY 2 |
| #define MCF_BUSCLK (MCF_CLK / 2) |
| |
| #include <asm/m54xxacr.h> |
| |
| #define MCFINT_VECBASE 64 |
| |
| /* |
| * Interrupt Controller Registers |
| */ |
| #define MCFICM_INTC0 (MCF_MBAR + 0x700) /* Base for Interrupt Ctrl 0 */ |
| |
| #define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */ |
| #define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */ |
| #define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */ |
| #define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */ |
| #define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */ |
| #define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */ |
| #define MCFINTC_IRLR 0x18 /* */ |
| #define MCFINTC_IACKL 0x19 /* */ |
| #define MCFINTC_ICR0 0x40 /* Base ICR register */ |
| |
| /* |
| * UART module. |
| */ |
| #define MCFUART_BASE0 (MCF_MBAR + 0x8600) /* Base address UART0 */ |
| #define MCFUART_BASE1 (MCF_MBAR + 0x8700) /* Base address UART1 */ |
| #define MCFUART_BASE2 (MCF_MBAR + 0x8800) /* Base address UART2 */ |
| #define MCFUART_BASE3 (MCF_MBAR + 0x8900) /* Base address UART3 */ |
| |
| /* |
| * Define system peripheral IRQ usage. |
| */ |
| #define MCF_IRQ_TIMER (MCFINT_VECBASE + 54) /* Slice Timer 0 */ |
| #define MCF_IRQ_PROFILER (MCFINT_VECBASE + 53) /* Slice Timer 1 */ |
| #define MCF_IRQ_UART0 (MCFINT_VECBASE + 35) |
| #define MCF_IRQ_UART1 (MCFINT_VECBASE + 34) |
| #define MCF_IRQ_UART2 (MCFINT_VECBASE + 33) |
| #define MCF_IRQ_UART3 (MCFINT_VECBASE + 32) |
| |
| /* |
| * Generic GPIO support |
| */ |
| #define MCFGPIO_PIN_MAX 0 /* I am too lazy to count */ |
| #define MCFGPIO_IRQ_MAX -1 |
| #define MCFGPIO_IRQ_VECBASE -1 |
| |
| /* |
| * EDGE Port support. |
| */ |
| #define MCFEPORT_EPPAR (MCF_MBAR + 0xf00) /* Pin assignment */ |
| #define MCFEPORT_EPDDR (MCF_MBAR + 0xf04) /* Data direction */ |
| #define MCFEPORT_EPIER (MCF_MBAR + 0xf05) /* Interrupt enable */ |
| #define MCFEPORT_EPDR (MCF_MBAR + 0xf08) /* Port data (w) */ |
| #define MCFEPORT_EPPDR (MCF_MBAR + 0xf09) /* Port data (r) */ |
| #define MCFEPORT_EPFR (MCF_MBAR + 0xf0c) /* Flags */ |
| |
| /* |
| * Some PSC related definitions |
| */ |
| #define MCF_PAR_PSC(x) (0x000A4F-((x)&0x3)) |
| #define MCF_PAR_SDA (0x0008) |
| #define MCF_PAR_SCL (0x0004) |
| #define MCF_PAR_PSC_TXD (0x04) |
| #define MCF_PAR_PSC_RXD (0x08) |
| #define MCF_PAR_PSC_RTS(x) (((x)&0x03)<<4) |
| #define MCF_PAR_PSC_CTS(x) (((x)&0x03)<<6) |
| #define MCF_PAR_PSC_CTS_GPIO (0x00) |
| #define MCF_PAR_PSC_CTS_BCLK (0x80) |
| #define MCF_PAR_PSC_CTS_CTS (0xC0) |
| #define MCF_PAR_PSC_RTS_GPIO (0x00) |
| #define MCF_PAR_PSC_RTS_FSYNC (0x20) |
| #define MCF_PAR_PSC_RTS_RTS (0x30) |
| #define MCF_PAR_PSC_CANRX (0x40) |
| |
| #endif /* m54xxsim_h */ |
