MIPS changes for 4.17

These are the main MIPS changes for 4.17. Rough overview:

 (1) generic platform: Add support for Microsemi Ocelot SoCs

 (2) crypto: Add CRC32 and CRC32C HW acceleration module

 (3) Various cleanups and misc improvements

Miscellaneous:

 - Hang more efficiently on halt/powerdown/restart

 - pm-cps: Block system suspend when a JTAG probe is present

 - Expand make help text for generic defconfigs
   - Refactor handling of legacy defconfigs

 - Determine the entry point from the ELF file header to fix microMIPS
   for certain toolchains

 - Introduce isa-rev.h for MIPS_ISA_REV and use to simplify other code

Minor cleanups:

 - DTS: boston/ci20: Unit name cleanups and correction

 - kdump: Make the default for PHYSICAL_START always 64-bit

 - Constify gpio_led in Alchemy, AR7, and TXX9

 - Silence a couple of W=1 warnings

 - Remove duplicate includes

Platform support:

ath79:

 - Fix AR724X_PLL_REG_PCIE_CONFIG offset

BCM47xx:

 - FIRMWARE: Use mac_pton() for MAC address parsing

 - Add Luxul XAP1500/XWR1750 WiFi LEDs

 - Use standard reset button for Luxul XWR-1750

BMIPS:

 - Enable CONFIG_BRCMSTB_PM in bmips_stb_defconfig for build coverage

 - Add STB PM, wake-up timer, watchdog DT nodes

Generic platform:

 - Add support for Microsemi Ocelot
   - dt-bindings: Add vendor prefix for Microsemi Corporation
   - dt-bindings: Add bindings for Microsemi SoCs
   - Add ocelot SoC & PCB123 board DTS files
   - MAINTAINERS: Add entry for Microsemi MIPS SoCs

 - Enable crc32-mips on r6 configs

Octeon:

 - Drop '.' after newlines in printk calls

ralink:

 - pci-mt7621: Enable PCIe on MT7688
-----BEGIN PGP SIGNATURE-----
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=4vUc
-----END PGP SIGNATURE-----
MIPS: BCM47XX: Use standard reset button for Luxul XWR-1750

The original patch submitted for support of the Luxul XWR-1750 used a
non-standard button handler for the reset button. This patch will allow
using the standard KEY_RESTART

Signed-off-by: Dan Haab <dan.haab@luxul.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18981/
Signed-off-by: James Hogan <jhogan@kernel.org>
1 file changed