blob: 5971577016a2b09bd484883e609860248ec57387 [file] [log] [blame]
/*
* Copyright (c) 2016 Intel Corporation
*
* Permission to use, copy, modify, distribute, and sell this software and its
* documentation for any purpose is hereby granted without fee, provided that
* the above copyright notice appear in all copies and that both that copyright
* notice and this permission notice appear in supporting documentation, and
* that the name of the copyright holders not be used in advertising or
* publicity pertaining to distribution of the software without specific,
* written prior permission. The copyright holders make no representations
* about the suitability of this software for any purpose. It is provided "as
* is" without express or implied warranty.
*
* THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
* EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
* DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
* TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
* OF THIS SOFTWARE.
*/
#ifndef __DRM_CONNECTOR_H__
#define __DRM_CONNECTOR_H__
#include <linux/list.h>
#include <linux/llist.h>
#include <linux/ctype.h>
#include <linux/hdmi.h>
#include <drm/drm_mode_object.h>
#include <uapi/drm/drm_mode.h>
struct drm_connector_helper_funcs;
struct drm_modeset_acquire_ctx;
struct drm_device;
struct drm_crtc;
struct drm_encoder;
struct drm_property;
struct drm_property_blob;
struct drm_printer;
struct edid;
enum drm_connector_force {
DRM_FORCE_UNSPECIFIED,
DRM_FORCE_OFF,
DRM_FORCE_ON, /* force on analog part normally */
DRM_FORCE_ON_DIGITAL, /* for DVI-I use digital connector */
};
/**
* enum drm_connector_status - status for a &drm_connector
*
* This enum is used to track the connector status. There are no separate
* #defines for the uapi!
*/
enum drm_connector_status {
/**
* @connector_status_connected: The connector is definitely connected to
* a sink device, and can be enabled.
*/
connector_status_connected = 1,
/**
* @connector_status_disconnected: The connector isn't connected to a
* sink device which can be autodetect. For digital outputs like DP or
* HDMI (which can be realiable probed) this means there's really
* nothing there. It is driver-dependent whether a connector with this
* status can be lit up or not.
*/
connector_status_disconnected = 2,
/**
* @connector_status_unknown: The connector's status could not be
* reliably detected. This happens when probing would either cause
* flicker (like load-detection when the connector is in use), or when a
* hardware resource isn't available (like when load-detection needs a
* free CRTC). It should be possible to light up the connector with one
* of the listed fallback modes. For default configuration userspace
* should only try to light up connectors with unknown status when
* there's not connector with @connector_status_connected.
*/
connector_status_unknown = 3,
};
enum subpixel_order {
SubPixelUnknown = 0,
SubPixelHorizontalRGB,
SubPixelHorizontalBGR,
SubPixelVerticalRGB,
SubPixelVerticalBGR,
SubPixelNone,
};
/**
* struct drm_scrambling: sink's scrambling support.
*/
struct drm_scrambling {
/**
* @supported: scrambling supported for rates > 340 Mhz.
*/
bool supported;
/**
* @low_rates: scrambling supported for rates <= 340 Mhz.
*/
bool low_rates;
};
/*
* struct drm_scdc - Information about scdc capabilities of a HDMI 2.0 sink
*
* Provides SCDC register support and capabilities related information on a
* HDMI 2.0 sink. In case of a HDMI 1.4 sink, all parameter must be 0.
*/
struct drm_scdc {
/**
* @supported: status control & data channel present.
*/
bool supported;
/**
* @read_request: sink is capable of generating scdc read request.
*/
bool read_request;
/**
* @scrambling: sink's scrambling capabilities
*/
struct drm_scrambling scrambling;
};
/**
* struct drm_hdmi_info - runtime information about the connected HDMI sink
*
* Describes if a given display supports advanced HDMI 2.0 features.
* This information is available in CEA-861-F extension blocks (like HF-VSDB).
*/
struct drm_hdmi_info {
/** @scdc: sink's scdc support and capabilities */
struct drm_scdc scdc;
/**
* @y420_vdb_modes: bitmap of modes which can support ycbcr420
* output only (not normal RGB/YCBCR444/422 outputs). There are total
* 107 VICs defined by CEA-861-F spec, so the size is 128 bits to map
* upto 128 VICs;
*/
unsigned long y420_vdb_modes[BITS_TO_LONGS(128)];
/**
* @y420_cmdb_modes: bitmap of modes which can support ycbcr420
* output also, along with normal HDMI outputs. There are total 107
* VICs defined by CEA-861-F spec, so the size is 128 bits to map upto
* 128 VICs;
*/
unsigned long y420_cmdb_modes[BITS_TO_LONGS(128)];
/** @y420_cmdb_map: bitmap of SVD index, to extraxt vcb modes */
u64 y420_cmdb_map;
/** @y420_dc_modes: bitmap of deep color support index */
u8 y420_dc_modes;
};
/**
* enum drm_link_status - connector's link_status property value
*
* This enum is used as the connector's link status property value.
* It is set to the values defined in uapi.
*
* @DRM_LINK_STATUS_GOOD: DP Link is Good as a result of successful
* link training
* @DRM_LINK_STATUS_BAD: DP Link is BAD as a result of link training
* failure
*/
enum drm_link_status {
DRM_LINK_STATUS_GOOD = DRM_MODE_LINK_STATUS_GOOD,
DRM_LINK_STATUS_BAD = DRM_MODE_LINK_STATUS_BAD,
};
/**
* struct drm_display_info - runtime data about the connected sink
*
* Describes a given display (e.g. CRT or flat panel) and its limitations. For
* fixed display sinks like built-in panels there's not much difference between
* this and &struct drm_connector. But for sinks with a real cable this
* structure is meant to describe all the things at the other end of the cable.
*
* For sinks which provide an EDID this can be filled out by calling
* drm_add_edid_modes().
*/
struct drm_display_info {
/**
* @name: Name of the display.
*/
char name[DRM_DISPLAY_INFO_LEN];
/**
* @width_mm: Physical width in mm.
*/
unsigned int width_mm;
/**
* @height_mm: Physical height in mm.
*/
unsigned int height_mm;
/**
* @pixel_clock: Maximum pixel clock supported by the sink, in units of
* 100Hz. This mismatches the clock in &drm_display_mode (which is in
* kHZ), because that's what the EDID uses as base unit.
*/
unsigned int pixel_clock;
/**
* @bpc: Maximum bits per color channel. Used by HDMI and DP outputs.
*/
unsigned int bpc;
/**
* @subpixel_order: Subpixel order of LCD panels.
*/
enum subpixel_order subpixel_order;
#define DRM_COLOR_FORMAT_RGB444 (1<<0)
#define DRM_COLOR_FORMAT_YCRCB444 (1<<1)
#define DRM_COLOR_FORMAT_YCRCB422 (1<<2)
#define DRM_COLOR_FORMAT_YCRCB420 (1<<3)
/**
* @color_formats: HDMI Color formats, selects between RGB and YCrCb
* modes. Used DRM_COLOR_FORMAT\_ defines, which are _not_ the same ones
* as used to describe the pixel format in framebuffers, and also don't
* match the formats in @bus_formats which are shared with v4l.
*/
u32 color_formats;
/**
* @bus_formats: Pixel data format on the wire, somewhat redundant with
* @color_formats. Array of size @num_bus_formats encoded using
* MEDIA_BUS_FMT\_ defines shared with v4l and media drivers.
*/
const u32 *bus_formats;
/**
* @num_bus_formats: Size of @bus_formats array.
*/
unsigned int num_bus_formats;
#define DRM_BUS_FLAG_DE_LOW (1<<0)
#define DRM_BUS_FLAG_DE_HIGH (1<<1)
/* drive data on pos. edge */
#define DRM_BUS_FLAG_PIXDATA_POSEDGE (1<<2)
/* drive data on neg. edge */
#define DRM_BUS_FLAG_PIXDATA_NEGEDGE (1<<3)
/* data is transmitted MSB to LSB on the bus */
#define DRM_BUS_FLAG_DATA_MSB_TO_LSB (1<<4)
/* data is transmitted LSB to MSB on the bus */
#define DRM_BUS_FLAG_DATA_LSB_TO_MSB (1<<5)
/**
* @bus_flags: Additional information (like pixel signal polarity) for
* the pixel data on the bus, using DRM_BUS_FLAGS\_ defines.
*/
u32 bus_flags;
/**
* @max_tmds_clock: Maximum TMDS clock rate supported by the
* sink in kHz. 0 means undefined.
*/
int max_tmds_clock;
/**
* @dvi_dual: Dual-link DVI sink?
*/
bool dvi_dual;
/**
* @edid_hdmi_dc_modes: Mask of supported hdmi deep color modes. Even
* more stuff redundant with @bus_formats.
*/
u8 edid_hdmi_dc_modes;
/**
* @cea_rev: CEA revision of the HDMI sink.
*/
u8 cea_rev;
/**
* @hdmi: advance features of a HDMI sink.
*/
struct drm_hdmi_info hdmi;
/**
* @non_desktop: Non desktop display (HMD).
*/
bool non_desktop;
};
int drm_display_info_set_bus_formats(struct drm_display_info *info,
const u32 *formats,
unsigned int num_formats);
/**
* struct drm_tv_connector_state - TV connector related states
* @subconnector: selected subconnector
* @margins: left/right/top/bottom margins
* @mode: TV mode
* @brightness: brightness in percent
* @contrast: contrast in percent
* @flicker_reduction: flicker reduction in percent
* @overscan: overscan in percent
* @saturation: saturation in percent
* @hue: hue in percent
*/
struct drm_tv_connector_state {
enum drm_mode_subconnector subconnector;
struct {
unsigned int left;
unsigned int right;
unsigned int top;
unsigned int bottom;
} margins;
unsigned int mode;
unsigned int brightness;
unsigned int contrast;
unsigned int flicker_reduction;
unsigned int overscan;
unsigned int saturation;
unsigned int hue;
};
/**
* struct drm_connector_state - mutable connector state
* @connector: backpointer to the connector
* @best_encoder: can be used by helpers and drivers to select the encoder
* @state: backpointer to global drm_atomic_state
* @tv: TV connector state
*/
struct drm_connector_state {
struct drm_connector *connector;
/**
* @crtc: CRTC to connect connector to, NULL if disabled.
*
* Do not change this directly, use drm_atomic_set_crtc_for_connector()
* instead.
*/
struct drm_crtc *crtc;
struct drm_encoder *best_encoder;
/**
* @link_status: Connector link_status to keep track of whether link is
* GOOD or BAD to notify userspace if retraining is necessary.
*/
enum drm_link_status link_status;
struct drm_atomic_state *state;
/**
* @commit: Tracks the pending commit to prevent use-after-free conditions.
*
* Is only set when @crtc is NULL.
*/
struct drm_crtc_commit *commit;
struct drm_tv_connector_state tv;
/**
* @picture_aspect_ratio: Connector property to control the
* HDMI infoframe aspect ratio setting.
*
* The %DRM_MODE_PICTURE_ASPECT_\* values much match the
* values for &enum hdmi_picture_aspect
*/
enum hdmi_picture_aspect picture_aspect_ratio;
/**
* @scaling_mode: Connector property to control the
* upscaling, mostly used for built-in panels.
*/
unsigned int scaling_mode;
};
/**
* struct drm_connector_funcs - control connectors on a given device
*
* Each CRTC may have one or more connectors attached to it. The functions
* below allow the core DRM code to control connectors, enumerate available modes,
* etc.
*/
struct drm_connector_funcs {
/**
* @dpms:
*
* Legacy entry point to set the per-connector DPMS state. Legacy DPMS
* is exposed as a standard property on the connector, but diverted to
* this callback in the drm core. Note that atomic drivers don't
* implement the 4 level DPMS support on the connector any more, but
* instead only have an on/off "ACTIVE" property on the CRTC object.
*
* This hook is not used by atomic drivers, remapping of the legacy DPMS
* property is entirely handled in the DRM core.
*
* RETURNS:
*
* 0 on success or a negative error code on failure.
*/
int (*dpms)(struct drm_connector *connector, int mode);
/**
* @reset:
*
* Reset connector hardware and software state to off. This function isn't
* called by the core directly, only through drm_mode_config_reset().
* It's not a helper hook only for historical reasons.
*
* Atomic drivers can use drm_atomic_helper_connector_reset() to reset
* atomic state using this hook.
*/
void (*reset)(struct drm_connector *connector);
/**
* @detect:
*
* Check to see if anything is attached to the connector. The parameter
* force is set to false whilst polling, true when checking the
* connector due to a user request. force can be used by the driver to
* avoid expensive, destructive operations during automated probing.
*
* This callback is optional, if not implemented the connector will be
* considered as always being attached.
*
* FIXME:
*
* Note that this hook is only called by the probe helper. It's not in
* the helper library vtable purely for historical reasons. The only DRM
* core entry point to probe connector state is @fill_modes.
*
* Note that the helper library will already hold
* &drm_mode_config.connection_mutex. Drivers which need to grab additional
* locks to avoid races with concurrent modeset changes need to use
* &drm_connector_helper_funcs.detect_ctx instead.
*
* RETURNS:
*
* drm_connector_status indicating the connector's status.
*/
enum drm_connector_status (*detect)(struct drm_connector *connector,
bool force);
/**
* @force:
*
* This function is called to update internal encoder state when the
* connector is forced to a certain state by userspace, either through
* the sysfs interfaces or on the kernel cmdline. In that case the
* @detect callback isn't called.
*
* FIXME:
*
* Note that this hook is only called by the probe helper. It's not in
* the helper library vtable purely for historical reasons. The only DRM
* core entry point to probe connector state is @fill_modes.
*/
void (*force)(struct drm_connector *connector);
/**
* @fill_modes:
*
* Entry point for output detection and basic mode validation. The
* driver should reprobe the output if needed (e.g. when hotplug
* handling is unreliable), add all detected modes to &drm_connector.modes
* and filter out any the device can't support in any configuration. It
* also needs to filter out any modes wider or higher than the
* parameters max_width and max_height indicate.
*
* The drivers must also prune any modes no longer valid from
* &drm_connector.modes. Furthermore it must update
* &drm_connector.status and &drm_connector.edid. If no EDID has been
* received for this output connector->edid must be NULL.
*
* Drivers using the probe helpers should use
* drm_helper_probe_single_connector_modes() or
* drm_helper_probe_single_connector_modes_nomerge() to implement this
* function.
*
* RETURNS:
*
* The number of modes detected and filled into &drm_connector.modes.
*/
int (*fill_modes)(struct drm_connector *connector, uint32_t max_width, uint32_t max_height);
/**
* @set_property:
*
* This is the legacy entry point to update a property attached to the
* connector.
*
* This callback is optional if the driver does not support any legacy
* driver-private properties. For atomic drivers it is not used because
* property handling is done entirely in the DRM core.
*
* RETURNS:
*
* 0 on success or a negative error code on failure.
*/
int (*set_property)(struct drm_connector *connector, struct drm_property *property,
uint64_t val);
/**
* @late_register:
*
* This optional hook can be used to register additional userspace
* interfaces attached to the connector, light backlight control, i2c,
* DP aux or similar interfaces. It is called late in the driver load
* sequence from drm_connector_register() when registering all the
* core drm connector interfaces. Everything added from this callback
* should be unregistered in the early_unregister callback.
*
* This is called while holding &drm_connector.mutex.
*
* Returns:
*
* 0 on success, or a negative error code on failure.
*/
int (*late_register)(struct drm_connector *connector);
/**
* @early_unregister:
*
* This optional hook should be used to unregister the additional
* userspace interfaces attached to the connector from
* late_register(). It is called from drm_connector_unregister(),
* early in the driver unload sequence to disable userspace access
* before data structures are torndown.
*
* This is called while holding &drm_connector.mutex.
*/
void (*early_unregister)(struct drm_connector *connector);
/**
* @destroy:
*
* Clean up connector resources. This is called at driver unload time
* through drm_mode_config_cleanup(). It can also be called at runtime
* when a connector is being hot-unplugged for drivers that support
* connector hotplugging (e.g. DisplayPort MST).
*/
void (*destroy)(struct drm_connector *connector);
/**
* @atomic_duplicate_state:
*
* Duplicate the current atomic state for this connector and return it.
* The core and helpers guarantee that any atomic state duplicated with
* this hook and still owned by the caller (i.e. not transferred to the
* driver by calling &drm_mode_config_funcs.atomic_commit) will be
* cleaned up by calling the @atomic_destroy_state hook in this
* structure.
*
* Atomic drivers which don't subclass &struct drm_connector_state should use
* drm_atomic_helper_connector_duplicate_state(). Drivers that subclass the
* state structure to extend it with driver-private state should use
* __drm_atomic_helper_connector_duplicate_state() to make sure shared state is
* duplicated in a consistent fashion across drivers.
*
* It is an error to call this hook before &drm_connector.state has been
* initialized correctly.
*
* NOTE:
*
* If the duplicate state references refcounted resources this hook must
* acquire a reference for each of them. The driver must release these
* references again in @atomic_destroy_state.
*
* RETURNS:
*
* Duplicated atomic state or NULL when the allocation failed.
*/
struct drm_connector_state *(*atomic_duplicate_state)(struct drm_connector *connector);
/**
* @atomic_destroy_state:
*
* Destroy a state duplicated with @atomic_duplicate_state and release
* or unreference all resources it references
*/
void (*atomic_destroy_state)(struct drm_connector *connector,
struct drm_connector_state *state);
/**
* @atomic_set_property:
*
* Decode a driver-private property value and store the decoded value
* into the passed-in state structure. Since the atomic core decodes all
* standardized properties (even for extensions beyond the core set of
* properties which might not be implemented by all drivers) this
* requires drivers to subclass the state structure.
*
* Such driver-private properties should really only be implemented for
* truly hardware/vendor specific state. Instead it is preferred to
* standardize atomic extension and decode the properties used to expose
* such an extension in the core.
*
* Do not call this function directly, use
* drm_atomic_connector_set_property() instead.
*
* This callback is optional if the driver does not support any
* driver-private atomic properties.
*
* NOTE:
*
* This function is called in the state assembly phase of atomic
* modesets, which can be aborted for any reason (including on
* userspace's request to just check whether a configuration would be
* possible). Drivers MUST NOT touch any persistent state (hardware or
* software) or data structures except the passed in @state parameter.
*
* Also since userspace controls in which order properties are set this
* function must not do any input validation (since the state update is
* incomplete and hence likely inconsistent). Instead any such input
* validation must be done in the various atomic_check callbacks.
*
* RETURNS:
*
* 0 if the property has been found, -EINVAL if the property isn't
* implemented by the driver (which shouldn't ever happen, the core only
* asks for properties attached to this connector). No other validation
* is allowed by the driver. The core already checks that the property
* value is within the range (integer, valid enum value, ...) the driver
* set when registering the property.
*/
int (*atomic_set_property)(struct drm_connector *connector,
struct drm_connector_state *state,
struct drm_property *property,
uint64_t val);
/**
* @atomic_get_property:
*
* Reads out the decoded driver-private property. This is used to
* implement the GETCONNECTOR IOCTL.
*
* Do not call this function directly, use
* drm_atomic_connector_get_property() instead.
*
* This callback is optional if the driver does not support any
* driver-private atomic properties.
*
* RETURNS:
*
* 0 on success, -EINVAL if the property isn't implemented by the
* driver (which shouldn't ever happen, the core only asks for
* properties attached to this connector).
*/
int (*atomic_get_property)(struct drm_connector *connector,
const struct drm_connector_state *state,
struct drm_property *property,
uint64_t *val);
/**
* @atomic_print_state:
*
* If driver subclasses &struct drm_connector_state, it should implement
* this optional hook for printing additional driver specific state.
*
* Do not call this directly, use drm_atomic_connector_print_state()
* instead.
*/
void (*atomic_print_state)(struct drm_printer *p,
const struct drm_connector_state *state);
};
/* mode specified on the command line */
struct drm_cmdline_mode {
bool specified;
bool refresh_specified;
bool bpp_specified;
int xres, yres;
int bpp;
int refresh;
bool rb;
bool interlace;
bool cvt;
bool margins;
enum drm_connector_force force;
};
/**
* struct drm_connector - central DRM connector control structure
* @dev: parent DRM device
* @kdev: kernel device for sysfs attributes
* @attr: sysfs attributes
* @head: list management
* @base: base KMS object
* @name: human readable name, can be overwritten by the driver
* @connector_type: one of the DRM_MODE_CONNECTOR_<foo> types from drm_mode.h
* @connector_type_id: index into connector type enum
* @interlace_allowed: can this connector handle interlaced modes?
* @doublescan_allowed: can this connector handle doublescan?
* @stereo_allowed: can this connector handle stereo modes?
* @funcs: connector control functions
* @edid_blob_ptr: DRM property containing EDID if present
* @properties: property tracking for this connector
* @dpms: current dpms state
* @helper_private: mid-layer private data
* @cmdline_mode: mode line parsed from the kernel cmdline for this connector
* @force: a DRM_FORCE_<foo> state for forced mode sets
* @override_edid: has the EDID been overwritten through debugfs for testing?
* @encoder_ids: valid encoders for this connector
* @encoder: encoder driving this connector, if any
* @eld: EDID-like data, if present
* @latency_present: AV delay info from ELD, if found
* @video_latency: video latency info from ELD, if found
* @audio_latency: audio latency info from ELD, if found
* @null_edid_counter: track sinks that give us all zeros for the EDID
* @bad_edid_counter: track sinks that give us an EDID with invalid checksum
* @edid_corrupt: indicates whether the last read EDID was corrupt
* @debugfs_entry: debugfs directory for this connector
* @has_tile: is this connector connected to a tiled monitor
* @tile_group: tile group for the connected monitor
* @tile_is_single_monitor: whether the tile is one monitor housing
* @num_h_tile: number of horizontal tiles in the tile group
* @num_v_tile: number of vertical tiles in the tile group
* @tile_h_loc: horizontal location of this tile
* @tile_v_loc: vertical location of this tile
* @tile_h_size: horizontal size of this tile.
* @tile_v_size: vertical size of this tile.
* @scaling_mode_property: Optional atomic property to control the upscaling.
*
* Each connector may be connected to one or more CRTCs, or may be clonable by
* another connector if they can share a CRTC. Each connector also has a specific
* position in the broader display (referred to as a 'screen' though it could
* span multiple monitors).
*/
struct drm_connector {
struct drm_device *dev;
struct device *kdev;
struct device_attribute *attr;
struct list_head head;
struct drm_mode_object base;
char *name;
/**
* @mutex: Lock for general connector state, but currently only protects
* @registered. Most of the connector state is still protected by
* &drm_mode_config.mutex.
*/
struct mutex mutex;
/**
* @index: Compacted connector index, which matches the position inside
* the mode_config.list for drivers not supporting hot-add/removing. Can
* be used as an array index. It is invariant over the lifetime of the
* connector.
*/
unsigned index;
int connector_type;
int connector_type_id;
bool interlace_allowed;
bool doublescan_allowed;
bool stereo_allowed;
/**
* @ycbcr_420_allowed : This bool indicates if this connector is
* capable of handling YCBCR 420 output. While parsing the EDID
* blocks, its very helpful to know, if the source is capable of
* handling YCBCR 420 outputs.
*/
bool ycbcr_420_allowed;
/**
* @registered: Is this connector exposed (registered) with userspace?
* Protected by @mutex.
*/
bool registered;
/**
* @modes:
* Modes available on this connector (from fill_modes() + user).
* Protected by &drm_mode_config.mutex.
*/
struct list_head modes;
/**
* @status:
* One of the drm_connector_status enums (connected, not, or unknown).
* Protected by &drm_mode_config.mutex.
*/
enum drm_connector_status status;
/**
* @probed_modes:
* These are modes added by probing with DDC or the BIOS, before
* filtering is applied. Used by the probe helpers. Protected by
* &drm_mode_config.mutex.
*/
struct list_head probed_modes;
/**
* @display_info: Display information is filled from EDID information
* when a display is detected. For non hot-pluggable displays such as
* flat panels in embedded systems, the driver should initialize the
* &drm_display_info.width_mm and &drm_display_info.height_mm fields
* with the physical size of the display.
*
* Protected by &drm_mode_config.mutex.
*/
struct drm_display_info display_info;
const struct drm_connector_funcs *funcs;
struct drm_property_blob *edid_blob_ptr;
struct drm_object_properties properties;
struct drm_property *scaling_mode_property;
/**
* @path_blob_ptr:
*
* DRM blob property data for the DP MST path property.
*/
struct drm_property_blob *path_blob_ptr;
/**
* @tile_blob_ptr:
*
* DRM blob property data for the tile property (used mostly by DP MST).
* This is meant for screens which are driven through separate display
* pipelines represented by &drm_crtc, which might not be running with
* genlocked clocks. For tiled panels which are genlocked, like
* dual-link LVDS or dual-link DSI, the driver should try to not expose
* the tiling and virtualize both &drm_crtc and &drm_plane if needed.
*/
struct drm_property_blob *tile_blob_ptr;
/* should we poll this connector for connects and disconnects */
/* hot plug detectable */
#define DRM_CONNECTOR_POLL_HPD (1 << 0)
/* poll for connections */
#define DRM_CONNECTOR_POLL_CONNECT (1 << 1)
/* can cleanly poll for disconnections without flickering the screen */
/* DACs should rarely do this without a lot of testing */
#define DRM_CONNECTOR_POLL_DISCONNECT (1 << 2)
/**
* @polled:
*
* Connector polling mode, a combination of
*
* DRM_CONNECTOR_POLL_HPD
* The connector generates hotplug events and doesn't need to be
* periodically polled. The CONNECT and DISCONNECT flags must not
* be set together with the HPD flag.
*
* DRM_CONNECTOR_POLL_CONNECT
* Periodically poll the connector for connection.
*
* DRM_CONNECTOR_POLL_DISCONNECT
* Periodically poll the connector for disconnection.
*
* Set to 0 for connectors that don't support connection status
* discovery.
*/
uint8_t polled;
/* requested DPMS state */
int dpms;
const struct drm_connector_helper_funcs *helper_private;
/* forced on connector */
struct drm_cmdline_mode cmdline_mode;
enum drm_connector_force force;
bool override_edid;
#define DRM_CONNECTOR_MAX_ENCODER 3
uint32_t encoder_ids[DRM_CONNECTOR_MAX_ENCODER];
struct drm_encoder *encoder; /* currently active encoder */
#define MAX_ELD_BYTES 128
/* EDID bits */
uint8_t eld[MAX_ELD_BYTES];
bool latency_present[2];
int video_latency[2]; /* [0]: progressive, [1]: interlaced */
int audio_latency[2];
int null_edid_counter; /* needed to workaround some HW bugs where we get all 0s */
unsigned bad_edid_counter;
/* Flag for raw EDID header corruption - used in Displayport
* compliance testing - * Displayport Link CTS Core 1.2 rev1.1 4.2.2.6
*/
bool edid_corrupt;
struct dentry *debugfs_entry;
/**
* @state:
*
* Current atomic state for this connector.
*
* This is protected by @drm_mode_config.connection_mutex. Note that
* nonblocking atomic commits access the current connector state without
* taking locks. Either by going through the &struct drm_atomic_state
* pointers, see for_each_oldnew_connector_in_state(),
* for_each_old_connector_in_state() and
* for_each_new_connector_in_state(). Or through careful ordering of
* atomic commit operations as implemented in the atomic helpers, see
* &struct drm_crtc_commit.
*/
struct drm_connector_state *state;
/* DisplayID bits */
bool has_tile;
struct drm_tile_group *tile_group;
bool tile_is_single_monitor;
uint8_t num_h_tile, num_v_tile;
uint8_t tile_h_loc, tile_v_loc;
uint16_t tile_h_size, tile_v_size;
/**
* @free_node:
*
* List used only by &drm_connector_iter to be able to clean up a
* connector from any context, in conjunction with
* &drm_mode_config.connector_free_work.
*/
struct llist_node free_node;
};
#define obj_to_connector(x) container_of(x, struct drm_connector, base)
int drm_connector_init(struct drm_device *dev,
struct drm_connector *connector,
const struct drm_connector_funcs *funcs,
int connector_type);
int drm_connector_register(struct drm_connector *connector);
void drm_connector_unregister(struct drm_connector *connector);
int drm_mode_connector_attach_encoder(struct drm_connector *connector,
struct drm_encoder *encoder);
void drm_connector_cleanup(struct drm_connector *connector);
static inline unsigned drm_connector_index(struct drm_connector *connector)
{
return connector->index;
}
/**
* drm_connector_lookup - lookup connector object
* @dev: DRM device
* @file_priv: drm file to check for lease against.
* @id: connector object id
*
* This function looks up the connector object specified by id
* add takes a reference to it.
*/
static inline struct drm_connector *drm_connector_lookup(struct drm_device *dev,
struct drm_file *file_priv,
uint32_t id)
{
struct drm_mode_object *mo;
mo = drm_mode_object_find(dev, file_priv, id, DRM_MODE_OBJECT_CONNECTOR);
return mo ? obj_to_connector(mo) : NULL;
}
/**
* drm_connector_get - acquire a connector reference
* @connector: DRM connector
*
* This function increments the connector's refcount.
*/
static inline void drm_connector_get(struct drm_connector *connector)
{
drm_mode_object_get(&connector->base);
}
/**
* drm_connector_put - release a connector reference
* @connector: DRM connector
*
* This function decrements the connector's reference count and frees the
* object if the reference count drops to zero.
*/
static inline void drm_connector_put(struct drm_connector *connector)
{
drm_mode_object_put(&connector->base);
}
/**
* drm_connector_reference - acquire a connector reference
* @connector: DRM connector
*
* This is a compatibility alias for drm_connector_get() and should not be
* used by new code.
*/
static inline void drm_connector_reference(struct drm_connector *connector)
{
drm_connector_get(connector);
}
/**
* drm_connector_unreference - release a connector reference
* @connector: DRM connector
*
* This is a compatibility alias for drm_connector_put() and should not be
* used by new code.
*/
static inline void drm_connector_unreference(struct drm_connector *connector)
{
drm_connector_put(connector);
}
const char *drm_get_connector_status_name(enum drm_connector_status status);
const char *drm_get_subpixel_order_name(enum subpixel_order order);
const char *drm_get_dpms_name(int val);
const char *drm_get_dvi_i_subconnector_name(int val);
const char *drm_get_dvi_i_select_name(int val);
const char *drm_get_tv_subconnector_name(int val);
const char *drm_get_tv_select_name(int val);
int drm_mode_create_dvi_i_properties(struct drm_device *dev);
int drm_mode_create_tv_properties(struct drm_device *dev,
unsigned int num_modes,
const char * const modes[]);
int drm_mode_create_scaling_mode_property(struct drm_device *dev);
int drm_connector_attach_scaling_mode_property(struct drm_connector *connector,
u32 scaling_mode_mask);
int drm_mode_create_aspect_ratio_property(struct drm_device *dev);
int drm_mode_create_suggested_offset_properties(struct drm_device *dev);
int drm_mode_connector_set_path_property(struct drm_connector *connector,
const char *path);
int drm_mode_connector_set_tile_property(struct drm_connector *connector);
int drm_mode_connector_update_edid_property(struct drm_connector *connector,
const struct edid *edid);
void drm_mode_connector_set_link_status_property(struct drm_connector *connector,
uint64_t link_status);
/**
* struct drm_tile_group - Tile group metadata
* @refcount: reference count
* @dev: DRM device
* @id: tile group id exposed to userspace
* @group_data: Sink-private data identifying this group
*
* @group_data corresponds to displayid vend/prod/serial for external screens
* with an EDID.
*/
struct drm_tile_group {
struct kref refcount;
struct drm_device *dev;
int id;
u8 group_data[8];
};
struct drm_tile_group *drm_mode_create_tile_group(struct drm_device *dev,
char topology[8]);
struct drm_tile_group *drm_mode_get_tile_group(struct drm_device *dev,
char topology[8]);
void drm_mode_put_tile_group(struct drm_device *dev,
struct drm_tile_group *tg);
/**
* struct drm_connector_list_iter - connector_list iterator
*
* This iterator tracks state needed to be able to walk the connector_list
* within struct drm_mode_config. Only use together with
* drm_connector_list_iter_begin(), drm_connector_list_iter_end() and
* drm_connector_list_iter_next() respectively the convenience macro
* drm_for_each_connector_iter().
*/
struct drm_connector_list_iter {
/* private: */
struct drm_device *dev;
struct drm_connector *conn;
};
void drm_connector_list_iter_begin(struct drm_device *dev,
struct drm_connector_list_iter *iter);
struct drm_connector *
drm_connector_list_iter_next(struct drm_connector_list_iter *iter);
void drm_connector_list_iter_end(struct drm_connector_list_iter *iter);
/**
* drm_for_each_connector_iter - connector_list iterator macro
* @connector: &struct drm_connector pointer used as cursor
* @iter: &struct drm_connector_list_iter
*
* Note that @connector is only valid within the list body, if you want to use
* @connector after calling drm_connector_list_iter_end() then you need to grab
* your own reference first using drm_connector_get().
*/
#define drm_for_each_connector_iter(connector, iter) \
while ((connector = drm_connector_list_iter_next(iter)))
#endif