| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <libgen.h> |
| |
| #include "trace-local.h" |
| #include "version.h" |
| |
| struct usage_help { |
| char *name; |
| char *short_help; |
| char *long_help; |
| }; |
| |
| static struct usage_help usage_help[] = { |
| { |
| "record", |
| "record a trace into a trace.dat file", |
| " %s record [-v][-e event [-f filter]][-p plugin][-F][-d][-D][-o file] \\\n" |
| " [-s usecs][-O option ][-l func][-g func][-n func] \\\n" |
| " [-P pid][-N host:port][-t][-r prio][-b size][-B buf][command ...]\n" |
| " [-m max][-C clock]\n" |
| " -e run command with event enabled\n" |
| " -f filter for previous -e event\n" |
| " -R trigger for previous -e event\n" |
| " -p run command with plugin enabled\n" |
| " -F filter only on the given process\n" |
| " -P trace the given pid like -F for the command\n" |
| " -c also trace the childen of -F\n" |
| " -C set the trace clock\n" |
| " -T do a stacktrace on all events\n" |
| " -l filter function name\n" |
| " -g set graph function\n" |
| " -n do not trace function\n" |
| " -m max size per CPU in kilobytes\n" |
| " -M set CPU mask to trace\n" |
| " -v will negate all -e after it (disable those events)\n" |
| " -d disable function tracer when running\n" |
| " -D Full disable of function tracing (for all users)\n" |
| " -o data output file [default trace.dat]\n" |
| " -O option to enable (or disable)\n" |
| " -r real time priority to run the capture threads\n" |
| " -s sleep interval between recording (in usecs) [default: 1000]\n" |
| " -S used with --profile, to enable only events in command line\n" |
| " -N host:port to connect to (see listen)\n" |
| " -t used with -N, forces use of tcp in live trace\n" |
| " -b change kernel buffersize (in kilobytes per CPU)\n" |
| " -B create sub buffer and folling events will be enabled here\n" |
| " -k do not reset the buffers after tracing.\n" |
| " -i do not fail if an event is not found\n" |
| " --by-comm used with --profile, merge events for related comms\n" |
| " --profile enable tracing options needed for report --profile\n" |
| " --func-stack perform a stack trace for function tracer\n" |
| " (use with caution)\n" |
| " --max-graph-depth limit function_graph depth\n" |
| }, |
| { |
| "start", |
| "start tracing without recording into a file", |
| " %s start [-e event][-p plugin][-d][-O option ][-P pid]\n" |
| " Uses same options as record, but does not run a command.\n" |
| " It only enables the tracing and exits\n" |
| }, |
| { |
| "extract", |
| "extract a trace from the kernel", |
| " %s extract [-p plugin][-O option][-o file][-B buf][-s][-a][-t]\n" |
| " Uses similar options as record, but only reads an existing trace.\n" |
| " -s : extract the snapshot instead of the main buffer\n" |
| " -B : extract a given buffer (more than one may be specified)\n" |
| " -a : extract all buffers (except top one)\n" |
| " -t : extract the top level buffer (useful with -B and -a)\n" |
| }, |
| { |
| "stop", |
| "stop the kernel from recording trace data", |
| " %s stop [-B buf [-B buf]..] [-a] [-t]\n" |
| " Stops the tracer from recording more data.\n" |
| " Used in conjunction with start\n" |
| " -B stop a given buffer (more than one may be specified)\n" |
| " -a stop all buffers (except top one)\n" |
| " -t stop the top level buffer (useful with -B or -a)\n" |
| }, |
| { |
| "restart", |
| "restart the kernel trace data recording", |
| " %s restart [-B buf [-B buf]..] [-a] [-t]\n" |
| " Restarts recording after a trace-cmd stop.\n" |
| " Used in conjunction with stop\n" |
| " -B restart a given buffer (more than one may be specified)\n" |
| " -a restart all buffers (except top one)\n" |
| " -t restart the top level buffer (useful with -B or -a)\n" |
| }, |
| { |
| "show", |
| "show the contents of the kernel tracing buffer", |
| " %s show [-p|-s][-c cpu][-B buf][options]\n" |
| " Basically, this is a cat of the trace file.\n" |
| " -p read the trace_pipe file instead\n" |
| " -s read the snapshot file instance\n" |
| " (Can't have both -p and -s)\n" |
| " -c just show the file associated with a given CPU\n" |
| " -B read from a tracing buffer instance.\n" |
| " -f display the file path that is being dumped\n" |
| " The following options shows the corresponding file name\n" |
| " and then exits.\n" |
| " --tracing_on\n" |
| " --current_tracer\n" |
| " --buffer_size (for buffer_size_kb)\n" |
| " --buffer_total_size (for buffer_total_size_kb)\n" |
| " --ftrace_filter (for set_ftrace_filter)\n" |
| " --ftrace_notrace (for set_ftrace_notrace)\n" |
| " --ftrace_pid (for set_ftrace_pid)\n" |
| " --graph_function (for set_graph_function)\n" |
| " --graph_notrace (for set_graph_notrace)\n" |
| " --cpumask (for tracing_cpumask)\n" |
| }, |
| { |
| "reset", |
| "disable all kernel tracing and clear the trace buffers", |
| " %s reset [-b size][-B buf][-a][-d][-t]\n" |
| " Disables the tracer (may reset trace file)\n" |
| " Used in conjunction with start\n" |
| " -b change the kernel buffer size (in kilobytes per CPU)\n" |
| " -d delete the previous specified instance\n" |
| " -B reset the given buffer instance (may specify multiple -B)\n" |
| " -a reset all instances (except top one)\n" |
| " -t reset the top level instance (useful with -B or -a)\n" |
| }, |
| { |
| "report", |
| "read out the trace stored in a trace.dat file", |
| " %s report [-i file] [--cpu cpu] [-e][-f][-l][-P][-L][-N][-R][-E]\\\n" |
| " [-r events][-n events][-F filter][-v][-V][-T][-O option]\n" |
| " [-H [start_system:]start_event,start_match[,pid]/[end_system:]end_event,end_match[,flags]\n" |
| " [-G]\n" |
| " -i input file [default trace.dat]\n" |
| " -e show file endianess\n" |
| " -f show function list\n" |
| " -P show printk list\n" |
| " -E show event files stored\n" |
| " -F filter to filter output on\n" |
| " -I filter out events with the HARDIRQ flag set\n" |
| " -S filter out events with the SOFTIRQ flag set\n" |
| " -t print out full timestamp. Do not truncate to 6 places.\n" |
| " -R raw format: ignore print format and only show field data\n" |
| " -r raw format the events that match the option\n" |
| " -v will negate all -F after it (Not show matches)\n" |
| " -T print out the filter strings created and exit\n" |
| " -V verbose (shows plugins being loaded)\n" |
| " -L load only local (~/.trace-cmd/plugins) plugins\n" |
| " -N do not load any plugins\n" |
| " -n ignore plugin handlers for events that match the option\n" |
| " -w show wakeup latencies\n" |
| " -l show latency format (default with latency tracers)\n" |
| " -O plugin option -O [plugin:]var[=val]\n" |
| " --check-events return whether all event formats can be parsed\n" |
| " --stat - show the buffer stats that were reported at the end of the record.\n" |
| " --uname - show uname of the record, if it was saved\n" |
| " --profile report stats on where tasks are blocked and such\n" |
| " -G when profiling, set soft and hard irqs as global\n" |
| " -H Allows users to hook two events together for timings\n" |
| " (used with --profile)\n" |
| " --by-comm used with --profile, merge events for related comms\n" |
| " --ts-offset will add amount to timestamp of all events of the\n" |
| " previous data file.\n" |
| " --ts2secs HZ, pass in the timestamp frequency (per second)\n" |
| " to convert the displayed timestamps to seconds\n" |
| " Affects the previous data file, unless there was no\n" |
| " previous data file, in which case it becomes default\n" |
| " --ts-diff Show the delta timestamp between events.\n" |
| }, |
| { |
| "stream", |
| "Start tracing and read the output directly", |
| " %s stream [-e event][-p plugin][-d][-O option ][-P pid]\n" |
| " Uses same options as record but does not write to files or the network.\n" |
| }, |
| { |
| "profile", |
| "Start profiling and read the output directly", |
| " %s profile [-e event][-p plugin][-d][-O option ][-P pid][-G][-S][-o output]\n" |
| " [-H [start_system:]start_event,start_match[,pid]/[end_system:]end_event,end_match[,flags]\n\n" |
| " Uses same options as record --profile.\n" |
| " -H Allows users to hook two events together for timings\n" |
| }, |
| { |
| "hist", |
| "show a historgram of the trace.dat information", |
| " %s hist [-i file][-P] [file]" |
| " -P ignore pids (compact all functions)\n" |
| }, |
| { |
| "stat", |
| "show the status of the running tracing (ftrace) system", |
| " %s stat" |
| }, |
| { |
| "split", |
| "parse a trace.dat file into smaller file(s)", |
| " %s split [options] -o file [start [end]]\n" |
| " -o output file to write to (file.1, file.2, etc)\n" |
| " -s n split file up by n seconds\n" |
| " -m n split file up by n milliseconds\n" |
| " -u n split file up by n microseconds\n" |
| " -e n split file up by n events\n" |
| " -p n split file up by n pages\n" |
| " -r repeat from start to end\n" |
| " -c per cpu, that is -p 2 will be 2 pages for each CPU\n" |
| " if option is specified, it will split the file\n" |
| " up starting at start, and ending at end\n" |
| " start - decimal start time in seconds (ex: 75678.923853)\n" |
| " if left out, will start at beginning of file\n" |
| " end - decimal end time in seconds\n" |
| }, |
| { |
| "options", |
| "list the plugin options available for trace-cmd report", |
| " %s options\n" |
| }, |
| { |
| "listen", |
| "listen on a network socket for trace clients", |
| " %s listen -p port[-D][-o file][-d dir][-l logfile]\n" |
| " Creates a socket to listen for clients.\n" |
| " -D create it in daemon mode.\n" |
| " -o file name to use for clients.\n" |
| " -d diretory to store client files.\n" |
| " -l logfile to write messages to.\n" |
| }, |
| { |
| "list", |
| "list the available events, plugins or options", |
| " %s list [-e [regex]][-t][-o][-f [regex]]\n" |
| " -e list available events\n" |
| " -F show event format\n" |
| " -R show event triggers\n" |
| " -l show event filters\n" |
| " -t list available tracers\n" |
| " -o list available options\n" |
| " -f [regex] list available functions to filter on\n" |
| " -P list loaded plugin files (by path)\n" |
| " -O list plugin options\n" |
| " -B list defined buffer instances\n" |
| " -C list the defined clocks (and active one)\n" |
| }, |
| { |
| "restore", |
| "restore a crashed record", |
| " %s restore [-c][-o file][-i file] cpu-file [cpu-file ...]\n" |
| " -c create a partial trace.dat file only\n" |
| " -o output file\n" |
| " -i parital trace.dat file for input\n" |
| }, |
| { |
| "snapshot", |
| "take snapshot of running trace", |
| " %s snapshot [-s][-r][-f][-B buf][-c cpu]\n" |
| " -s take a snapshot of the trace buffer\n" |
| " -r reset current snapshot\n" |
| " -f free the snapshot buffer\n" |
| " without the above three options, display snapshot\n" |
| " -c operate on the snapshot buffer for the given CPU\n" |
| " -B operate on the snapshot buffer for a tracing buffer instance.\n" |
| }, |
| { |
| "stack", |
| "output, enable or disable kernel stack tracing", |
| " %s stack [--start][--stop][--reset]\n" |
| " --start enable the stack tracer\n" |
| " --stop disable the stack tracer\n" |
| " --reset reset the maximum stack found\n" |
| }, |
| { |
| "check-events", |
| "parse trace event formats", |
| " %s check-format [-N]\n" |
| " -N do not load any plugins\n" |
| }, |
| { |
| NULL, NULL, NULL |
| } |
| }; |
| |
| static struct usage_help *find_help(char *cmd) |
| { |
| struct usage_help *help; |
| |
| help = usage_help; |
| while (help->name) { |
| if (strcmp(cmd, help->name) == 0) |
| return help; |
| help++; |
| } |
| return NULL; |
| } |
| |
| void usage(char **argv) |
| { |
| struct usage_help *help = NULL; |
| char *arg = argv[0]; |
| char *p; |
| |
| p = basename(arg); |
| |
| printf("\n" |
| "%s version %s\n\n" |
| "usage:\n", p, VERSION_STRING); |
| |
| if (argv[1]) |
| help = find_help(argv[1]); |
| |
| if (help) { |
| printf(help->long_help, p); |
| goto out; |
| } |
| |
| printf(" %s [COMMAND] ...\n\n" |
| " commands:\n", p); |
| |
| help = usage_help; |
| while (help->name) { |
| printf(" %s - %s\n", help->name, help->short_help); |
| help++; |
| } |
| out: |
| printf("\n"); |
| exit(-1); |
| } |
