TRACE-CMD-REPORT(1)
===================

NAME
----
trace-cmd-report - show in ASCII a trace created by trace-cmd record

SYNOPSIS
--------
*trace-cmd report* ['OPTIONS'] ['input-file']

DESCRIPTION
-----------
The trace-cmd(1) report command will output a human readable report of a trace
created by trace-cmd record.

OPTIONS
-------
*-i* 'input-file'::
    By default, trace-cmd report will read the file 'trace.dat'. But the *-i*
    option open up the given 'input-file' instead. Note, the input file may
    also be specified as the last item on the command line.

*-e*::
    This outputs the endianess of the file. trace-cmd report is smart enough
    to be able to read big endian files on little endian machines, and vise
    versa.

*-f*::
    This outputs the list of functions that have been recorded in the file.

*-P*::
    This outputs the list of "trace_printk()" data. The raw trace data points
    to static pointers in the kernel. This must be stored in the trace.dat
    file.

*-E*::
    This lists the possible events in the file (but this list is not
    necessarily the list of events in the file).

*--events*::
    This will list the event formats that are stored in the trace.dat file.

*--event* regex::
    This will print events that match the given regex. If a colon is specified,
    then the characters before the colon will be used to match the system and
    the characters after the colon will match the event.

     trace-cmd report --event sys:read

    The above will only match events where the system name contains "sys"
    and the event name contains "read".

     trace-cmd report --event read

    The above will match all events that contain "read" in its name. Also it
    may list all events of a system that contains "read" as well.

*--check-events*::
    This will parse the event format strings that are stored in the trace.dat
    file and return whether the formats can be parsed correctly. It will load
    plugins unless *-N* is specified.

*-t*::
    Print the full timestamp. The timestamps in the data file are usually
    recorded to the nanosecond. But the default display of the timestamp
    is only to the microsecond. To see the full timestamp, add the *-t* option.

*-F* 'filter'::
    Add a filter to limit what events are displayed. The format of the filter
    is:

------------------------------------------
    <events> ':' <filter>
    <events> = SYSTEM'/'EVENT  | SYSTEM | EVENT | <events> ',' <events>
    <filter> = EVENT_FIELD <op> <value> | <filter> '&&' <filter> |
               <filter> '||' <filter> | '(' <filter> ')' | '!' <filter>
    <op> = '==' | '!=' | '>=' | '<=' | '>' | '<' | '&' | '|' | '^' |
           '+' | '-' | '*' | '/' | '%'
    <value> = NUM | STRING | EVENT_FIELD
------------------------------------------

    SYSTEM is the name of the system to filter on. If the EVENT is left out,
    then it applies to all events under the SYSTEM. If only one string is used
    without the '/' to deliminate between SYSTEM and EVENT, then the filter
    will be applied to all systems and events that match the given string.

    Whitespace is ignored, such that "sched:next_pid==123" is equivalent to
    "sched : next_pid == 123".

    STRING is defined with single or double quotes (single quote must end with
    single quote, and double with double). Whitespace within quotes are not
    ignored.

    The representation of a SYSTEM or EVENT may also be a regular expression
    as defined by 'regcomp(3)'.

    The EVENT_FIELD is the name of the field of an event that is being
    filtered. If the event does not contain the EVENT_FIELD, that part of the
    equation will be considered false.

------------------------------------------
    -F 'sched : bogus == 1 || common_pid == 2'
------------------------------------------

    The "bogus == 1" will always evaluate to FALSE because no event has a
    field called "bogus", but the "common_pid == 2" will still be evaluated
    since all events have the field "common_pid". Any "sched" event that was
    traced by the process with the PID of 2 will be shown.

    Note, the EVENT_FIELD is the field name as shown by an events format
    (as displayed with *--events*), and not what is found in the output.
    If the output shows "ID:foo" but the field that "foo" belongs to was
    called "name" in the event format, then "name" must be used in the filter.
    The same is true about values. If the value that is displayed is converted
    by to a string symbol, the filter checks the original value and not the
    value displayed. For example, to filter on all tasks that were in the
    running state at a context switch:

------------------------------------------
    -F 'sched/sched_switch : prev_state==0'
------------------------------------------

    Although the output displays 'R', having 'prev_stat=="R"' will not work.

    Note: You can also specify 'COMM' as an EVENT_FIELD. This will use the
    task name (or comm) of the record to compare. For example, to filter out
    all of the "trace-cmd" tasks:

------------------------------------------
    -F '.*:COMM != "trace-cmd"'
------------------------------------------

*-I*::
    Do not print events where the HARDIRQ latency flag is set.
    This will filter out most events that are from interrupt context.
    Note, it may not filter out function traced functions that are
    in interrupt context but were called before the kernel "in interrupt"
    flag was set.

*-S*::
    Do not print events where the SOFTIRQ latency flag is set.
    This will filter out most events that are from soft interrupt context.

*-v*::
    This causes the following filters of *-F* to filter out the matching
    events.

------------------------------------------
    -v -F 'sched/sched_switch : prev_state == 0'
------------------------------------------

    Will not display any sched_switch events that have a prev_state of 0.
    Removing the *-v* will only print out those events.

*-T*::
    Test the filters of -F. After processing a filter string, the
    resulting filter will be displayed for each event. This is useful
    for using a filter for more than one event where a field may not
    exist in all events. Also it can be used to make sure there are no
    misspelled event field names, as they will simply be ignored.
    *-T* is ignored if *-F* is not specified.

*-V*::
    Show the plugins that are loaded.

*-L*::
    This will not load system wide plugins. It loads "local only". That is
    what it finds in the ~/.trace-cmd/plugins directory.

*-N*::
    This will not load any plugins.

*-n* 'event-re'::
    This will cause all events that match the option to ignore any registered
    handler (by the plugins) to print the event. The normal event will be printed
    instead.  The 'event-re' is a regular expression as defined by 'regcomp(3)'.

*--profile*::
    With the *--profile* option, "trace-cmd report" will process all the events
    first, and then output a format showing where tasks have spent their time
    in the kernel, as well as where they are blocked the most, and where wake up
    latencies are.

    See trace-cmd-profile(1) for more details and examples.

*-G*::
    Set interrupt (soft and hard) events as global (associated to CPU
    instead of tasks). Only works for --profile.

*-H* 'event-hooks'::
    Add custom event matching to connect any two events together.

    See trace-cmd-profile(1) for format.

*-R*::
    This will show the events in "raw" format. That is, it will ignore the event's
    print formatting and just print the contents of each field.

*-r* 'event-re'::
    This will cause all events that match the option to print its raw fields.
    The 'event-re' is a regular expression as defined by 'regcomp(3)'.

*-l*::
    This adds a "latency output" format. Information about interrupts being
    disabled, soft irq being disabled, the "need_resched" flag being set,
    preempt count, and big kernel lock are all being recorded with every
    event. But the default display does not show this information. This option
    will set display this information with 6 characters. When one of the
    fields is zero or N/A a \'.\' is shown.

------------------------------------------
      <idle>-0       0d.h1. 106467.859747: function:             ktime_get <-- tick_check_idle
------------------------------------------

    The 0d.h1. denotes this information. The first character is never a '.'
    and represents what CPU the trace was recorded on (CPU 0). The 'd' denotes
    that interrupts were disabled. The 'h' means that this was called inside
    an interrupt handler. The '1' is the preemption disabled (preempt_count)
    was set to one.  The two '.'s are "need_resched" flag and kernel lock
    counter.  If the "need_resched" flag is set, then that character would be a
    'N'.

*-w*::
    If both the 'sched_switch' and 'sched_wakeup' events are enabled, then
    this option will report the latency between the time the task was first
    woken, and the time it was scheduled in.

*-q*::
    Quiet non critical warnings.

*-O*::
    Pass options to the trace-cmd plugins that are loaded.

     -O plugin:var=value

     The 'plugin:' and '=value' are optional. Value may be left off for options
     that are boolean. If the 'plugin:' is left off, then any variable that matches
     in all plugins will be set.

     Example:  -O fgraph:tailprint

*--stat*::
    If the trace.dat file recorded the final stats (outputed at the end of record)
    the *--stat* option can be used to retrieve them.

*--uname*::
    If the trace.dat file recorded uname during the run, this will retrieve that
    information.

*--ts-offset* offset::
    Add (or subtract if negative) an offset for all timestamps of the previous
    data file specified with *-i*. This is useful to merge sort multiple trace.dat
    files where the difference in the timestamp is known. For example if a trace
    is done on a virtual guest, and another trace is done on the host. If the
    host timestamp is 1000 units ahead of the guest, the following can be done:

    trace-cmd report -i host.dat --ts-offset -1000 -i guest.dat

    This will subtract 1000 timestamp units from all the host events as it merges
    with the guest.dat events. Note, the units is for the raw units recorded in
    the trace. If the units are nanoseconds, the addition (or subtraction) from
    the offset will be nanoseconds even if the displayed units are microseconds.

*--ts2secs* HZ::
    Convert the current clock source into a second (nanosecond resolution)
    output. When using clocks like x86-tsc, if the frequency is known,
    by passing in the clock frequency, this will convert the time to seconds.

    This option affects any trace.dat file given with *-i* proceeding it.
    If this option comes before any *-i* option, then that value becomes
    the default conversion for all other trace.dat files. If another
    --ts2secs option appears after a *-i* trace.dat file, than that option
    will override the default value.

    Example: On a 3.4 GHz machine

      trace-cmd record -p function -C x86-tsc

      trace-cmd report --ts2ns 3400000000

     The report will convert the cycles timestamps into a readable second
     display. The default display resolution is microseconds, unless *-t*
     is used.

     The value of --ts-offset must still be in the raw timestamp units, even
     with this option. The offset will be converted as well.

*--ts-diff*::
     Show the time differences between events. The difference will appear in
     parenthesis just after the timestamp.

EXAMPLES
--------

Using a trace.dat file that was created with:

------------------------------------------
    # trace-cmd record -p function -e all sleep 5


------------------------------------------

The default report shows:

------------------------------------------
 # trace-cmd report
       trace-cmd-16129 [002] 158126.498411: function: __mutex_unlock_slowpath <-- mutex_unlock
       trace-cmd-16131 [000] 158126.498411: kmem_cache_alloc: call_site=811223c5 ptr=0xffff88003ecf2b40 bytes_req=272 bytes_alloc=320 gfp_flags=GFP_KERNEL|GFP_ZERO
       trace-cmd-16130 [003] 158126.498411: function:             do_splice_to <-- sys_splice
           sleep-16133 [001] 158126.498412: function: inotify_inode_queue_event <-- vfs_write
       trace-cmd-16129 [002] 158126.498420: lock_release: 0xffff88003f1fa4f8 &sb->s_type->i_mutex_key
       trace-cmd-16131 [000] 158126.498421: function: security_file_alloc <-- get_empty_filp
           sleep-16133 [001] 158126.498422: function: __fsnotify_parent <-- vfs_write
       trace-cmd-16130 [003] 158126.498422: function: rw_verify_area <-- do_splice_to
       trace-cmd-16131 [000] 158126.498424: function: cap_file_alloc_security <-- security_file_alloc
       trace-cmd-16129 [002] 158126.498425: function: syscall_trace_leave <-- int_check_syscall_exit_work
           sleep-16133 [001] 158126.498426: function: inotify_dentry_parent_queue_event <-- vfs_write
       trace-cmd-16130 [003] 158126.498426: function: security_file_permission <-- rw_verify_area
       trace-cmd-16129 [002] 158126.498428: function: audit_syscall_exit <-- syscall_trace_leave
[...]


------------------------------------------

To see everything but the function traces:

------------------------------------------
 # trace-cmd report -v -F 'function'
       trace-cmd-16131 [000] 158126.498411: kmem_cache_alloc: call_site=811223c5 ptr=0xffff88003ecf2b40 bytes_req=272 bytes_alloc=320 gfp_flags=GFP_KERNEL|GFP_ZERO
       trace-cmd-16129 [002] 158126.498420: lock_release: 0xffff88003f1fa4f8 &sb->s_type->i_mutex_key
       trace-cmd-16130 [003] 158126.498436: lock_acquire: 0xffffffff8166bf78 read all_cpu_access_lock
       trace-cmd-16131 [000] 158126.498438: lock_acquire: 0xffff88003df5b520 read &fs->lock
       trace-cmd-16129 [002] 158126.498446: kfree: call_site=810a7abb ptr=0x0
       trace-cmd-16130 [003] 158126.498448: lock_acquire: 0xffff880002250a80 &per_cpu(cpu_access_lock, cpu)
       trace-cmd-16129 [002] 158126.498450: sys_exit_splice:      0xfffffff5
       trace-cmd-16131 [000] 158126.498454: lock_release: 0xffff88003df5b520 &fs->lock
           sleep-16133 [001] 158126.498456: kfree: call_site=810a7abb ptr=0x0
           sleep-16133 [001] 158126.498460: sys_exit_write:       0x1
       trace-cmd-16130 [003] 158126.498462: kmalloc: call_site=810bf95b ptr=0xffff88003dedc040 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL|GFP_ZERO


------------------------------------------

To see only the kmalloc calls that were greater than 1000 bytes:

------------------------------------------
 #trace-cmd report -F 'kmalloc: bytes_req > 1000'
          <idle>-0     [000] 158128.126641: kmalloc: call_site=81330635 ptr=0xffff88003c2fd000 bytes_req=2096 bytes_alloc=4096 gfp_flags=GFP_ATOMIC


------------------------------------------

To see wakeups and sched switches that left the previous task in the running
state:
------------------------------------------
 # trace-cmd report -F 'sched: prev_state == 0 || (success == 1)'
       trace-cmd-16132 [002] 158126.499951: sched_wakeup: comm=trace-cmd pid=16129 prio=120 success=1 target_cpu=002
       trace-cmd-16132 [002] 158126.500401: sched_switch: prev_comm=trace-cmd prev_pid=16132 prev_prio=120 prev_state=R ==> next_comm=trace-cmd next_pid=16129 next_prio=120
          <idle>-0     [003] 158126.500585: sched_wakeup: comm=trace-cmd pid=16130 prio=120 success=1 target_cpu=003
          <idle>-0     [003] 158126.501241: sched_switch: prev_comm=swapper prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=trace-cmd next_pid=16130 next_prio=120
       trace-cmd-16132 [000] 158126.502475: sched_wakeup: comm=trace-cmd pid=16131 prio=120 success=1 target_cpu=000
       trace-cmd-16131 [002] 158126.506516: sched_wakeup: comm=trace-cmd pid=16129 prio=120 success=1 target_cpu=002
          <idle>-0     [003] 158126.550110: sched_switch: prev_comm=swapper prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=trace-cmd next_pid=16130 next_prio=120
       trace-cmd-16131 [003] 158126.570243: sched_wakeup: comm=trace-cmd pid=16129 prio=120 success=1 target_cpu=003
       trace-cmd-16130 [002] 158126.618202: sched_switch: prev_comm=trace-cmd prev_pid=16130 prev_prio=120 prev_state=R ==> next_comm=yum-updatesd next_pid=3088 next_prio=1 20
       trace-cmd-16129 [003] 158126.622379: sched_wakeup: comm=trace-cmd pid=16131 prio=120 success=1 target_cpu=003
       trace-cmd-16129 [000] 158126.649287: sched_wakeup: comm=trace-cmd pid=16131 prio=120 success=1 target_cpu=000


------------------------------------------

The above needs a little explanation. The filter specifies the "sched"
subsystem, which includes both sched_switch and sched_wakeup events. Any event
that does not have the format field "prev_state" or "success", will evaluate
those expressions as FALSE, and will not produce a match. Using "||" will have
the "prev_state" test happen for the "sched_switch" event and the "success"
test happen for the "sched_wakeup" event.


------------------------------------------
  # trace-cmd report -w -F 'sched_switch, sched_wakeup.*'
[...]
       trace-cmd-16130 [003] 158131.580616: sched_wakeup: comm=trace-cmd pid=16131 prio=120 success=1 target_cpu=003
       trace-cmd-16129 [000] 158131.581502: sched_switch: prev_comm=trace-cmd prev_pid=16129 prev_prio=120 prev_state=S ==> next_comm=trace-cmd next_pid=16131 next_prio=120 Latency: 885.901 usecs
       trace-cmd-16131 [000] 158131.582414: sched_wakeup: comm=trace-cmd pid=16129 prio=120 success=1 target_cpu=000
       trace-cmd-16132 [001] 158131.583219: sched_switch: prev_comm=trace-cmd prev_pid=16132 prev_prio=120 prev_state=S ==> next_comm=trace-cmd next_pid=16129 next_prio=120 Latency: 804.809 usecs
           sleep-16133 [002] 158131.584121: sched_wakeup: comm=trace-cmd pid=16120 prio=120 success=1 target_cpu=002
       trace-cmd-16129 [001] 158131.584128: sched_wakeup: comm=trace-cmd pid=16132 prio=120 success=1 target_cpu=001
           sleep-16133 [002] 158131.584275: sched_switch: prev_comm=sleep prev_pid=16133 prev_prio=120 prev_state=R ==> next_comm=trace-cmd next_pid=16120 next_prio=120 Latency: 153.915 usecs
       trace-cmd-16130 [003] 158131.585284: sched_switch: prev_comm=trace-cmd prev_pid=16130 prev_prio=120 prev_state=S ==> next_comm=trace-cmd next_pid=16132 next_prio=120 Latency: 1155.677 usecs

Average wakeup latency: 26626.656 usecs


------------------------------------------

The above trace produces the wakeup latencies of the tasks. The "sched_switch"
event reports each individual latency after writing the event information.
At the end of the report, the average wakeup latency is reported.

------------------------------------------
  # trace-cmd report -w -F 'sched_switch, sched_wakeup.*: prio < 100 || next_prio < 100'
          <idle>-0     [003] 158131.516753: sched_wakeup: comm=ksoftirqd/3 pid=13 prio=49 success=1 target_cpu=003
          <idle>-0     [003] 158131.516855: sched_switch: prev_comm=swapper prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=ksoftirqd/3 next_pid=13 next_prio=49 Latency: 101.244 usecs
          <idle>-0     [003] 158131.533781: sched_wakeup: comm=ksoftirqd/3 pid=13 prio=49 success=1 target_cpu=003
          <idle>-0     [003] 158131.533897: sched_switch: prev_comm=swapper prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=ksoftirqd/3 next_pid=13 next_prio=49 Latency: 115.608 usecs
          <idle>-0     [003] 158131.569730: sched_wakeup: comm=ksoftirqd/3 pid=13 prio=49 success=1 target_cpu=003
          <idle>-0     [003] 158131.569851: sched_switch: prev_comm=swapper prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=ksoftirqd/3 next_pid=13 next_prio=49 Latency: 121.024 usecs

Average wakeup latency: 110.021 usecs


------------------------------------------

The above version will only show the wakeups and context switches of Real Time
tasks. The 'prio' used inside the kernel starts at 0 for highest priority.
That is 'prio' 0 is equivalent to user space real time priority 99, and
priority 98 is equivalent to user space real time priority 1.
Prios less than 100 represent Real Time tasks.

An example of the profile:
------------------------------------------
 # trace-cmd record --profile sleep 1
 # trace-cmd report --profile --comm sleep
task: sleep-21611
  Event: sched_switch:R (1) Total: 99442 Avg: 99442 Max: 99442 Min:99442
     <stack> 1 total:99442 min:99442 max:99442 avg=99442
       => ftrace_raw_event_sched_switch (0xffffffff8105f812)
       => __schedule (0xffffffff8150810a)
       => preempt_schedule (0xffffffff8150842e)
       => ___preempt_schedule (0xffffffff81273354)
       => cpu_stop_queue_work (0xffffffff810b03c5)
       => stop_one_cpu (0xffffffff810b063b)
       => sched_exec (0xffffffff8106136d)
       => do_execve_common.isra.27 (0xffffffff81148c89)
       => do_execve (0xffffffff811490b0)
       => SyS_execve (0xffffffff811492c4)
       => return_to_handler (0xffffffff8150e3c8)
       => stub_execve (0xffffffff8150c699)
  Event: sched_switch:S (1) Total: 1000506680 Avg: 1000506680 Max: 1000506680 Min:1000506680
     <stack> 1 total:1000506680 min:1000506680 max:1000506680 avg=1000506680
       => ftrace_raw_event_sched_switch (0xffffffff8105f812)
       => __schedule (0xffffffff8150810a)
       => schedule (0xffffffff815084b8)
       => do_nanosleep (0xffffffff8150b22c)
       => hrtimer_nanosleep (0xffffffff8108d647)
       => SyS_nanosleep (0xffffffff8108d72c)
       => return_to_handler (0xffffffff8150e3c8)
       => tracesys_phase2 (0xffffffff8150c304)
  Event: sched_wakeup:21611 (1) Total: 30326 Avg: 30326 Max: 30326 Min:30326
     <stack> 1 total:30326 min:30326 max:30326 avg=30326
       => ftrace_raw_event_sched_wakeup_template (0xffffffff8105f653)
       => ttwu_do_wakeup (0xffffffff810606eb)
       => ttwu_do_activate.constprop.124 (0xffffffff810607c8)
       => try_to_wake_up (0xffffffff8106340a)
------------------------------------------

SEE ALSO
--------
trace-cmd(1), trace-cmd-record(1), trace-cmd-start(1), trace-cmd-stop(1),
trace-cmd-extract(1), trace-cmd-reset(1), trace-cmd-split(1),
trace-cmd-list(1), trace-cmd-listen(1), trace-cmd-profile(1)

AUTHOR
------
Written by Steven Rostedt, <rostedt@goodmis.org>

RESOURCES
---------
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git

COPYING
-------
Copyright \(C) 2010 Red Hat, Inc. Free use of this software is granted under
the terms of the GNU Public License (GPL).