| /* Copyright 2001 Sun Microsystems (thockin@sun.com) */ |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include "ethtool-util.h" |
| |
| #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) |
| |
| #define HW_REVID(b30, b29, b28, b27, b26, b23, b22) \ |
| (b30<<30 | b29<<29 | b28<<28 | b27<<27 | b26<<26 | b23<<23 | b22<<22) |
| |
| enum chip_type { |
| RTLNONE, |
| RTL8139, |
| RTL8139_K, |
| RTL8139A, |
| RTL8139A_G, |
| RTL8139B, |
| RTL8130, |
| RTL8139C, |
| RTL8100, |
| RTL8100B_8139D, |
| RTL8139Cp, |
| RTL8101, |
| RTL8169, |
| RTL8169s, |
| RTL8110 |
| }; |
| |
| enum { |
| chip_type_mask = HW_REVID(1, 1, 1, 1, 1, 1, 1) |
| }; |
| |
| static struct chip_info { |
| const char *name; |
| u32 id_mask; |
| } rtl_info_tbl[] = { |
| { "RTL-8139", HW_REVID(1, 0, 0, 0, 0, 0, 0) }, |
| { "RTL-8139-K", HW_REVID(1, 1, 0, 0, 0, 0, 0) }, |
| { "RTL-8139A", HW_REVID(1, 1, 1, 0, 0, 0, 0) }, |
| { "RTL-8139A-G", HW_REVID(1, 1, 1, 0, 0, 1, 0) }, |
| { "RTL-8139B", HW_REVID(1, 1, 1, 1, 0, 0, 0) }, |
| { "RTL-8130", HW_REVID(1, 1, 1, 1, 1, 0, 0) }, |
| { "RTL-8139C", HW_REVID(1, 1, 1, 0, 1, 0, 0) }, |
| { "RTL-8100", HW_REVID(1, 1, 1, 1, 0, 1, 0) }, |
| { "RTL-8100B/8139D", HW_REVID(1, 1, 1, 0, 1, 0, 1) }, |
| { "RTL-8139C+", HW_REVID(1, 1, 1, 0, 1, 1, 0) }, |
| { "RTL-8101", HW_REVID(1, 1, 1, 0, 1, 1, 1) }, |
| { "RTL-8168B/8111B", HW_REVID(0, 1, 1, 1, 0, 0, 0) }, |
| { "RTL-8101E", HW_REVID(0, 1, 1, 0, 1, 0, 0) }, |
| { "RTL-8169", HW_REVID(0, 0, 0, 0, 0, 0, 0) }, |
| { "RTL-8169s", HW_REVID(0, 0, 0, 0, 1, 0, 0) }, |
| { "RTL-8110", HW_REVID(0, 0, 1, 0, 0, 0, 0) }, |
| { } |
| }; |
| |
| static void |
| print_intr_bits(u16 mask) |
| { |
| fprintf(stdout, |
| " %s%s%s%s%s%s%s%s%s%s%s\n", |
| mask & (1 << 15) ? "SERR " : "", |
| mask & (1 << 14) ? "TimeOut " : "", |
| mask & (1 << 8) ? "SWInt " : "", |
| mask & (1 << 7) ? "TxNoBuf " : "", |
| mask & (1 << 6) ? "RxFIFO " : "", |
| mask & (1 << 5) ? "LinkChg " : "", |
| mask & (1 << 4) ? "RxNoBuf " : "", |
| mask & (1 << 3) ? "TxErr " : "", |
| mask & (1 << 2) ? "TxOK " : "", |
| mask & (1 << 1) ? "RxErr " : "", |
| mask & (1 << 0) ? "RxOK " : ""); |
| } |
| |
| int |
| realtek_dump_regs(struct ethtool_drvinfo *info, struct ethtool_regs *regs) |
| { |
| u32 *data = (u32 *) regs->data; |
| u8 *data8 = (u8 *) regs->data; |
| u32 v; |
| struct chip_info *ci; |
| unsigned int board_type = RTLNONE, i; |
| |
| v = data[0x40 >> 2] & chip_type_mask; |
| |
| ci = &rtl_info_tbl[0]; |
| while (ci->name) { |
| if (v == ci->id_mask) |
| break; |
| ci++; |
| } |
| if (v != ci->id_mask) { |
| fprintf(stderr, "unknown RealTek chip\n"); |
| return 91; |
| } |
| for (i = 0; i < ARRAY_SIZE(rtl_info_tbl); i++) { |
| if (ci == &rtl_info_tbl[i]) |
| board_type = i + 1; |
| } |
| if (board_type == RTLNONE) |
| abort(); |
| |
| fprintf(stdout, |
| "RealTek %s registers:\n" |
| "------------------------------\n", |
| ci->name); |
| |
| fprintf(stdout, |
| "0x00: MAC Address %02x:%02x:%02x:%02x:%02x:%02x\n", |
| data8[0x00], |
| data8[0x01], |
| data8[0x02], |
| data8[0x03], |
| data8[0x04], |
| data8[0x05]); |
| |
| fprintf(stdout, |
| "0x08: Multicast Address Filter 0x%08x 0x%08x\n", |
| data[0x08 >> 2], |
| data[0x0c >> 2]); |
| |
| if (board_type == RTL8139Cp || |
| board_type == RTL8169 || |
| board_type == RTL8169s || |
| board_type == RTL8110) { |
| fprintf(stdout, |
| "0x10: Dump Tally Counter Command 0x%08x 0x%08x\n", |
| data[0x10 >> 2], |
| data[0x14 >> 2]); |
| |
| fprintf(stdout, |
| "0x20: Tx Normal Priority Ring Addr 0x%08x 0x%08x\n", |
| data[0x20 >> 2], |
| data[0x24 >> 2]); |
| |
| fprintf(stdout, |
| "0x28: Tx High Priority Ring Addr 0x%08x 0x%08x\n", |
| data[0x28 >> 2], |
| data[0x2C >> 2]); |
| } else { |
| fprintf(stdout, |
| "0x10: Transmit Status Desc 0 0x%08x\n" |
| "0x14: Transmit Status Desc 1 0x%08x\n" |
| "0x18: Transmit Status Desc 2 0x%08x\n" |
| "0x1C: Transmit Status Desc 3 0x%08x\n", |
| data[0x10 >> 2], |
| data[0x14 >> 2], |
| data[0x18 >> 2], |
| data[0x1C >> 2]); |
| fprintf(stdout, |
| "0x20: Transmit Start Addr 0 0x%08x\n" |
| "0x24: Transmit Start Addr 1 0x%08x\n" |
| "0x28: Transmit Start Addr 2 0x%08x\n" |
| "0x2C: Transmit Start Addr 3 0x%08x\n", |
| data[0x20 >> 2], |
| data[0x24 >> 2], |
| data[0x28 >> 2], |
| data[0x2C >> 2]); |
| } |
| |
| if (board_type == RTL8169 || |
| board_type == RTL8169s || |
| board_type == RTL8110) { |
| fprintf(stdout, |
| "0x30: Flash memory read/write 0x%08x\n", |
| data[0x30 >> 2]); |
| } else { |
| fprintf(stdout, |
| "0x30: Rx buffer addr (C mode) 0x%08x\n", |
| data[0x30 >> 2]); |
| } |
| |
| v = data8[0x36]; |
| fprintf(stdout, |
| "0x34: Early Rx Byte Count %8u\n" |
| "0x36: Early Rx Status 0x%02x\n", |
| data[0x34 >> 2] & 0xffff, |
| v); |
| |
| if (v & 0xf) { |
| fprintf(stdout, |
| " %s%s%s%s\n", |
| v & (1 << 3) ? "ERxGood " : "", |
| v & (1 << 2) ? "ERxBad " : "", |
| v & (1 << 1) ? "ERxOverWrite " : "", |
| v & (1 << 0) ? "ERxOK " : ""); |
| } |
| |
| v = data8[0x37]; |
| fprintf(stdout, |
| "0x37: Command 0x%02x\n" |
| " Rx %s, Tx %s%s\n", |
| data8[0x37], |
| v & (1 << 3) ? "on" : "off", |
| v & (1 << 2) ? "on" : "off", |
| v & (1 << 4) ? ", RESET" : ""); |
| |
| if (board_type != RTL8169 && |
| board_type != RTL8169s && |
| board_type != RTL8110) { |
| fprintf(stdout, |
| "0x38: Current Address of Packet Read (C mode) 0x%04x\n" |
| "0x3A: Current Rx buffer address (C mode) 0x%04x\n", |
| data[0x38 >> 2] & 0xffff, |
| data[0x38 >> 2] >> 16); |
| } |
| |
| fprintf(stdout, |
| "0x3C: Interrupt Mask 0x%04x\n", |
| data[0x3c >> 2] & 0xffff); |
| print_intr_bits(data[0x3c >> 2] & 0xffff); |
| fprintf(stdout, |
| "0x3E: Interrupt Status 0x%04x\n", |
| data[0x3c >> 2] >> 16); |
| print_intr_bits(data[0x3c >> 2] >> 16); |
| |
| fprintf(stdout, |
| "0x40: Tx Configuration 0x%08x\n" |
| "0x44: Rx Configuration 0x%08x\n" |
| "0x48: Timer count 0x%08x\n" |
| "0x4C: Missed packet counter 0x%06x\n", |
| data[0x40 >> 2], |
| data[0x44 >> 2], |
| data[0x48 >> 2], |
| data[0x4C >> 2] & 0xffffff); |
| |
| fprintf(stdout, |
| "0x50: EEPROM Command 0x%02x\n" |
| "0x51: Config 0 0x%02x\n" |
| "0x52: Config 1 0x%02x\n", |
| data8[0x50], |
| data8[0x51], |
| data8[0x52]); |
| |
| if (board_type == RTL8169 || |
| board_type == RTL8169s || |
| board_type == RTL8110) { |
| fprintf(stdout, |
| "0x53: Config 2 0x%02x\n" |
| "0x54: Config 3 0x%02x\n" |
| "0x55: Config 4 0x%02x\n" |
| "0x56: Config 5 0x%02x\n", |
| data8[0x53], |
| data8[0x54], |
| data8[0x55], |
| data8[0x56]); |
| fprintf(stdout, |
| "0x58: Timer interrupt 0x%08x\n", |
| data[0x58 >> 2]); |
| } |
| else { |
| if (board_type >= RTL8139A) { |
| fprintf(stdout, |
| "0x54: Timer interrupt 0x%08x\n", |
| data[0x54 >> 2]); |
| } |
| fprintf(stdout, |
| "0x58: Media status 0x%02x\n", |
| data8[0x58]); |
| if (board_type >= RTL8139A) { |
| fprintf(stdout, |
| "0x59: Config 3 0x%02x\n", |
| data8[0x59]); |
| } |
| if (board_type >= RTL8139B) { |
| fprintf(stdout, |
| "0x5A: Config 4 0x%02x\n", |
| data8[0x5A]); |
| } |
| } |
| |
| fprintf(stdout, |
| "0x5C: Multiple Interrupt Select 0x%04x\n", |
| data[0x5c >> 2] & 0xffff); |
| |
| if (board_type == RTL8169 || |
| board_type == RTL8169s || |
| board_type == RTL8110) { |
| fprintf(stdout, |
| "0x60: PHY access 0x%08x\n" |
| "0x64: TBI control and status 0x%08x\n", |
| data[0x60 >> 2], |
| data[0x64 >> 2]); |
| |
| fprintf(stdout, |
| "0x68: TBI Autonegotiation advertisement (ANAR) 0x%04x\n" |
| "0x6A: TBI Link partner ability (LPAR) 0x%04x\n", |
| data[0x68 >> 2] & 0xffff, |
| data[0x68 >> 2] >> 16); |
| |
| fprintf(stdout, |
| "0x6C: PHY status 0x%02x\n", |
| data8[0x6C]); |
| |
| fprintf(stdout, |
| "0x84: PM wakeup frame 0 0x%08x 0x%08x\n" |
| "0x8C: PM wakeup frame 1 0x%08x 0x%08x\n", |
| data[0x84 >> 2], |
| data[0x88 >> 2], |
| data[0x8C >> 2], |
| data[0x90 >> 2]); |
| |
| fprintf(stdout, |
| "0x94: PM wakeup frame 2 (low) 0x%08x 0x%08x\n" |
| "0x9C: PM wakeup frame 2 (high) 0x%08x 0x%08x\n", |
| data[0x94 >> 2], |
| data[0x98 >> 2], |
| data[0x9C >> 2], |
| data[0xA0 >> 2]); |
| |
| fprintf(stdout, |
| "0xA4: PM wakeup frame 3 (low) 0x%08x 0x%08x\n" |
| "0xAC: PM wakeup frame 3 (high) 0x%08x 0x%08x\n", |
| data[0xA4 >> 2], |
| data[0xA8 >> 2], |
| data[0xAC >> 2], |
| data[0xB0 >> 2]); |
| |
| fprintf(stdout, |
| "0xB4: PM wakeup frame 4 (low) 0x%08x 0x%08x\n" |
| "0xBC: PM wakeup frame 4 (high) 0x%08x 0x%08x\n", |
| data[0xB4 >> 2], |
| data[0xB8 >> 2], |
| data[0xBC >> 2], |
| data[0xC0 >> 2]); |
| |
| fprintf(stdout, |
| "0xC4: Wakeup frame 0 CRC 0x%04x\n" |
| "0xC6: Wakeup frame 1 CRC 0x%04x\n" |
| "0xC8: Wakeup frame 2 CRC 0x%04x\n" |
| "0xCA: Wakeup frame 3 CRC 0x%04x\n" |
| "0xCC: Wakeup frame 4 CRC 0x%04x\n", |
| data[0xC4 >> 2] & 0xffff, |
| data[0xC4 >> 2] >> 16, |
| data[0xC8 >> 2] & 0xffff, |
| data[0xC8 >> 2] >> 16, |
| data[0xCC >> 2] & 0xffff); |
| fprintf(stdout, |
| "0xDA: RX packet maximum size 0x%04x\n", |
| data[0xD8 >> 2] >> 16); |
| } |
| else { |
| fprintf(stdout, |
| "0x5E: PCI revision id 0x%02x\n", |
| data8[0x5e]); |
| fprintf(stdout, |
| "0x60: Transmit Status of All Desc (C mode) 0x%04x\n" |
| "0x62: MII Basic Mode Control Register 0x%04x\n", |
| data[0x60 >> 2] & 0xffff, |
| data[0x60 >> 2] >> 16); |
| fprintf(stdout, |
| "0x64: MII Basic Mode Status Register 0x%04x\n" |
| "0x66: MII Autonegotiation Advertising 0x%04x\n", |
| data[0x64 >> 2] & 0xffff, |
| data[0x64 >> 2] >> 16); |
| fprintf(stdout, |
| "0x68: MII Link Partner Ability 0x%04x\n" |
| "0x6A: MII Expansion 0x%04x\n", |
| data[0x68 >> 2] & 0xffff, |
| data[0x68 >> 2] >> 16); |
| fprintf(stdout, |
| "0x6C: MII Disconnect counter 0x%04x\n" |
| "0x6E: MII False carrier sense counter 0x%04x\n", |
| data[0x6C >> 2] & 0xffff, |
| data[0x6C >> 2] >> 16); |
| fprintf(stdout, |
| "0x70: MII Nway test 0x%04x\n" |
| "0x72: MII RX_ER counter 0x%04x\n", |
| data[0x70 >> 2] & 0xffff, |
| data[0x70 >> 2] >> 16); |
| fprintf(stdout, |
| "0x74: MII CS configuration 0x%04x\n", |
| data[0x74 >> 2] & 0xffff); |
| if (board_type >= RTL8139_K) { |
| fprintf(stdout, |
| "0x78: PHY parameter 1 0x%08x\n" |
| "0x7C: Twister parameter 0x%08x\n", |
| data[0x78 >> 2], |
| data[0x7C >> 2]); |
| if (board_type >= RTL8139A) { |
| fprintf(stdout, |
| "0x80: PHY parameter 2 0x%02x\n", |
| data8[0x80]); |
| } |
| } |
| if (board_type == RTL8139Cp) { |
| fprintf(stdout, |
| "0x82: Low addr of a Tx Desc w/ Tx DMA OK 0x%04x\n", |
| data[0x80 >> 2] >> 16); |
| } else if (board_type == RTL8130) { |
| fprintf(stdout, |
| "0x82: MII register 0x%02x\n", |
| data8[0x82]); |
| } |
| if (board_type >= RTL8139A) { |
| fprintf(stdout, |
| "0x84: PM CRC for wakeup frame 0 0x%02x\n" |
| "0x85: PM CRC for wakeup frame 1 0x%02x\n" |
| "0x86: PM CRC for wakeup frame 2 0x%02x\n" |
| "0x87: PM CRC for wakeup frame 3 0x%02x\n" |
| "0x88: PM CRC for wakeup frame 4 0x%02x\n" |
| "0x89: PM CRC for wakeup frame 5 0x%02x\n" |
| "0x8A: PM CRC for wakeup frame 6 0x%02x\n" |
| "0x8B: PM CRC for wakeup frame 7 0x%02x\n", |
| data8[0x84], |
| data8[0x85], |
| data8[0x86], |
| data8[0x87], |
| data8[0x88], |
| data8[0x89], |
| data8[0x8A], |
| data8[0x8B]); |
| fprintf(stdout, |
| "0x8C: PM wakeup frame 0 0x%08x 0x%08x\n" |
| "0x94: PM wakeup frame 1 0x%08x 0x%08x\n" |
| "0x9C: PM wakeup frame 2 0x%08x 0x%08x\n" |
| "0xA4: PM wakeup frame 3 0x%08x 0x%08x\n" |
| "0xAC: PM wakeup frame 4 0x%08x 0x%08x\n" |
| "0xB4: PM wakeup frame 5 0x%08x 0x%08x\n" |
| "0xBC: PM wakeup frame 6 0x%08x 0x%08x\n" |
| "0xC4: PM wakeup frame 7 0x%08x 0x%08x\n", |
| data[0x8C >> 2], |
| data[0x90 >> 2], |
| data[0x94 >> 2], |
| data[0x98 >> 2], |
| data[0x9C >> 2], |
| data[0xA0 >> 2], |
| data[0xA4 >> 2], |
| data[0xA8 >> 2], |
| data[0xAC >> 2], |
| data[0xB0 >> 2], |
| data[0xB4 >> 2], |
| data[0xB8 >> 2], |
| data[0xBC >> 2], |
| data[0xC0 >> 2], |
| data[0xC4 >> 2], |
| data[0xC8 >> 2]); |
| fprintf(stdout, |
| "0xCC: PM LSB CRC for wakeup frame 0 0x%02x\n" |
| "0xCD: PM LSB CRC for wakeup frame 1 0x%02x\n" |
| "0xCE: PM LSB CRC for wakeup frame 2 0x%02x\n" |
| "0xCF: PM LSB CRC for wakeup frame 3 0x%02x\n" |
| "0xD0: PM LSB CRC for wakeup frame 4 0x%02x\n" |
| "0xD1: PM LSB CRC for wakeup frame 5 0x%02x\n" |
| "0xD2: PM LSB CRC for wakeup frame 6 0x%02x\n" |
| "0xD3: PM LSB CRC for wakeup frame 7 0x%02x\n", |
| data8[0xCC], |
| data8[0xCD], |
| data8[0xCE], |
| data8[0xCF], |
| data8[0xD0], |
| data8[0xD1], |
| data8[0xD2], |
| data8[0xD3]); |
| } |
| if (board_type >= RTL8139B) { |
| if (board_type != RTL8100 && board_type != RTL8100B_8139D && |
| board_type != RTL8101) |
| fprintf(stdout, |
| "0xD4: Flash memory read/write 0x%08x\n", |
| data[0xD4 >> 2]); |
| if (board_type != RTL8130) |
| fprintf(stdout, |
| "0xD8: Config 5 0x%02x\n", |
| data8[0xD8]); |
| } |
| } |
| |
| if (board_type == RTL8139Cp || |
| board_type == RTL8169 || |
| board_type == RTL8169s || |
| board_type == RTL8110) { |
| v = data[0xE0 >> 2] & 0xffff; |
| fprintf(stdout, |
| "0xE0: C+ Command 0x%04x\n", |
| v); |
| if (v & (1 << 9)) |
| fprintf(stdout, " Big-endian mode\n"); |
| if (v & (1 << 8)) |
| fprintf(stdout, " Home LAN enable\n"); |
| if (v & (1 << 6)) |
| fprintf(stdout, " VLAN de-tagging\n"); |
| if (v & (1 << 5)) |
| fprintf(stdout, " RX checksumming\n"); |
| if (v & (1 << 4)) |
| fprintf(stdout, " PCI 64-bit DAC\n"); |
| if (v & (1 << 3)) |
| fprintf(stdout, " PCI Multiple RW\n"); |
| |
| v = data[0xe0 >> 2] >> 16; |
| fprintf(stdout, |
| "0xE2: Interrupt Mitigation 0x%04x\n" |
| " TxTimer: %u\n" |
| " TxPackets: %u\n" |
| " RxTimer: %u\n" |
| " RxPackets: %u\n", |
| v, |
| v >> 12, |
| (v >> 8) & 0xf, |
| (v >> 4) & 0xf, |
| v & 0xf); |
| |
| fprintf(stdout, |
| "0xE4: Rx Ring Addr 0x%08x 0x%08x\n", |
| data[0xE4 >> 2], |
| data[0xE8 >> 2]); |
| |
| fprintf(stdout, |
| "0xEC: Early Tx threshold 0x%02x\n", |
| data8[0xEC]); |
| |
| if (board_type == RTL8139Cp) { |
| fprintf(stdout, |
| "0xFC: External MII register 0x%08x\n", |
| data[0xFC >> 2]); |
| } |
| } |
| |
| return 0; |
| } |
