sfpdiag.c - pub/scm/linux/kernel/git/jkirsher/ethtool - Git at Google

 /*
  * sfpdiag.c: Implements SFF-8472 optics diagnostics.
  *
  * Aurelien Guillaume <aurelien@iwi.me> (C) 2012
  *   This implementation is loosely based on DOM patches
  *   from Robert Olsson <robert@herjulf.se> (C) 2009
  *   and SFF-8472 specs (ftp://ftp.seagate.com/pub/sff/SFF-8472.PDF)
  *   by SFF Committee.
  */

 #include <stdio.h>
 #include <math.h>
 #include <arpa/inet.h>
 #include "internal.h"
 #include "sff-common.h"

 /* Offsets in decimal, for direct comparison with the SFF specs */

 /* A0-based EEPROM offsets for DOM support checks */
 #define SFF_A0_DOM                        92
 #define SFF_A0_OPTIONS                    93
 #define SFF_A0_COMP                       94

 /* EEPROM bit values for various registers */
 #define SFF_A0_DOM_EXTCAL                 (1 << 4)
 #define SFF_A0_DOM_INTCAL                 (1 << 5)
 #define SFF_A0_DOM_IMPL                   (1 << 6)
 #define SFF_A0_DOM_PWRT                   (1 << 3)

 #define SFF_A0_OPTIONS_AW                 (1 << 7)

 /*
  * See ethtool.c comments about SFF-8472, this is the offset
  * at which the A2 page is in the EEPROM blob returned by the
  * kernel.
  */
 #define SFF_A2_BASE                       0x100

 /* A2-based offsets for DOM */
 #define SFF_A2_TEMP                       96
 #define SFF_A2_TEMP_HALRM                 0
 #define SFF_A2_TEMP_LALRM                 2
 #define SFF_A2_TEMP_HWARN                 4
 #define SFF_A2_TEMP_LWARN                 6

 #define SFF_A2_VCC                        98
 #define SFF_A2_VCC_HALRM                  8
 #define SFF_A2_VCC_LALRM                  10
 #define SFF_A2_VCC_HWARN                  12
 #define SFF_A2_VCC_LWARN                  14

 #define SFF_A2_BIAS                       100
 #define SFF_A2_BIAS_HALRM                 16
 #define SFF_A2_BIAS_LALRM                 18
 #define SFF_A2_BIAS_HWARN                 20
 #define SFF_A2_BIAS_LWARN                 22

 #define SFF_A2_TX_PWR                     102
 #define SFF_A2_TX_PWR_HALRM               24
 #define SFF_A2_TX_PWR_LALRM               26
 #define SFF_A2_TX_PWR_HWARN               28
 #define SFF_A2_TX_PWR_LWARN               30

 #define SFF_A2_RX_PWR                     104
 #define SFF_A2_RX_PWR_HALRM               32
 #define SFF_A2_RX_PWR_LALRM               34
 #define SFF_A2_RX_PWR_HWARN               36
 #define SFF_A2_RX_PWR_LWARN               38

 #define SFF_A2_ALRM_FLG                   112
 #define SFF_A2_WARN_FLG                   116

 /* 32-bit little-endian calibration constants */
 #define SFF_A2_CAL_RXPWR4                 56
 #define SFF_A2_CAL_RXPWR3                 60
 #define SFF_A2_CAL_RXPWR2                 64
 #define SFF_A2_CAL_RXPWR1                 68
 #define SFF_A2_CAL_RXPWR0                 72

 /* 16-bit little endian calibration constants */
 #define SFF_A2_CAL_TXI_SLP                76
 #define SFF_A2_CAL_TXI_OFF                78
 #define SFF_A2_CAL_TXPWR_SLP              80
 #define SFF_A2_CAL_TXPWR_OFF              82
 #define SFF_A2_CAL_T_SLP                  84
 #define SFF_A2_CAL_T_OFF                  86
 #define SFF_A2_CAL_V_SLP                  88
 #define SFF_A2_CAL_V_OFF                  90

 static struct sff8472_aw_flags {
 	const char *str;        /* Human-readable string, null at the end */
 	int offset;             /* A2-relative address offset */
 	__u8 value;             /* Alarm is on if (offset & value) != 0. */
 } sff8472_aw_flags[] = {
 	{ "Laser bias current high alarm",   SFF_A2_ALRM_FLG, (1 << 3) },
 	{ "Laser bias current low alarm",    SFF_A2_ALRM_FLG, (1 << 2) },
 	{ "Laser bias current high warning", SFF_A2_WARN_FLG, (1 << 3) },
 	{ "Laser bias current low warning",  SFF_A2_WARN_FLG, (1 << 2) },

 	{ "Laser output power high alarm",   SFF_A2_ALRM_FLG, (1 << 1) },
 	{ "Laser output power low alarm",    SFF_A2_ALRM_FLG, (1 << 0) },
 	{ "Laser output power high warning", SFF_A2_WARN_FLG, (1 << 1) },
 	{ "Laser output power low warning",  SFF_A2_WARN_FLG, (1 << 0) },

 	{ "Module temperature high alarm",   SFF_A2_ALRM_FLG, (1 << 7) },
 	{ "Module temperature low alarm",    SFF_A2_ALRM_FLG, (1 << 6) },
 	{ "Module temperature high warning", SFF_A2_WARN_FLG, (1 << 7) },
 	{ "Module temperature low warning",  SFF_A2_WARN_FLG, (1 << 6) },

 	{ "Module voltage high alarm",   SFF_A2_ALRM_FLG, (1 << 5) },
 	{ "Module voltage low alarm",    SFF_A2_ALRM_FLG, (1 << 4) },
 	{ "Module voltage high warning", SFF_A2_WARN_FLG, (1 << 5) },
 	{ "Module voltage low warning",  SFF_A2_WARN_FLG, (1 << 4) },

 	{ "Laser rx power high alarm",   SFF_A2_ALRM_FLG + 1, (1 << 7) },
 	{ "Laser rx power low alarm",    SFF_A2_ALRM_FLG + 1, (1 << 6) },
 	{ "Laser rx power high warning", SFF_A2_WARN_FLG + 1, (1 << 7) },
 	{ "Laser rx power low warning",  SFF_A2_WARN_FLG + 1, (1 << 6) },

 	{ NULL, 0, 0 },
 };

 /* Most common case: 16-bit unsigned integer in a certain unit */
 #define A2_OFFSET_TO_U16(offset) \
 	(id[SFF_A2_BASE + (offset)] << 8 | id[SFF_A2_BASE + (offset) + 1])

 /* Calibration slope is a number between 0.0 included and 256.0 excluded. */
 #define A2_OFFSET_TO_SLP(offset) \
 	(id[SFF_A2_BASE + (offset)] + id[SFF_A2_BASE + (offset) + 1] / 256.)

 /* Calibration offset is an integer from -32768 to 32767 */
 #define A2_OFFSET_TO_OFF(offset) \
 	((__s16)A2_OFFSET_TO_U16(offset))

 /* RXPWR(x) are IEEE-754 floating point numbers in big-endian format */
 #define A2_OFFSET_TO_RXPWRx(offset) \
 	(befloattoh((__u32 *)(id + SFF_A2_BASE + (offset))))

 /*
  * 2-byte internal temperature conversions:
  * First byte is a signed 8-bit integer, which is the temp decimal part
  * Second byte are 1/256th of degree, which are added to the dec part.
  */
 #define A2_OFFSET_TO_TEMP(offset) ((__s16)A2_OFFSET_TO_U16(offset))

 static void sff8472_dom_parse(const __u8 *id, struct sff_diags *sd)
 {
 	sd->bias_cur[MCURR] = A2_OFFSET_TO_U16(SFF_A2_BIAS);
 	sd->bias_cur[HALRM] = A2_OFFSET_TO_U16(SFF_A2_BIAS_HALRM);
 	sd->bias_cur[LALRM] = A2_OFFSET_TO_U16(SFF_A2_BIAS_LALRM);
 	sd->bias_cur[HWARN] = A2_OFFSET_TO_U16(SFF_A2_BIAS_HWARN);
 	sd->bias_cur[LWARN] = A2_OFFSET_TO_U16(SFF_A2_BIAS_LWARN);

 	sd->sfp_voltage[MCURR] = A2_OFFSET_TO_U16(SFF_A2_VCC);
 	sd->sfp_voltage[HALRM] = A2_OFFSET_TO_U16(SFF_A2_VCC_HALRM);
 	sd->sfp_voltage[LALRM] = A2_OFFSET_TO_U16(SFF_A2_VCC_LALRM);
 	sd->sfp_voltage[HWARN] = A2_OFFSET_TO_U16(SFF_A2_VCC_HWARN);
 	sd->sfp_voltage[LWARN] = A2_OFFSET_TO_U16(SFF_A2_VCC_LWARN);

 	sd->tx_power[MCURR] = A2_OFFSET_TO_U16(SFF_A2_TX_PWR);
 	sd->tx_power[HALRM] = A2_OFFSET_TO_U16(SFF_A2_TX_PWR_HALRM);
 	sd->tx_power[LALRM] = A2_OFFSET_TO_U16(SFF_A2_TX_PWR_LALRM);
 	sd->tx_power[HWARN] = A2_OFFSET_TO_U16(SFF_A2_TX_PWR_HWARN);
 	sd->tx_power[LWARN] = A2_OFFSET_TO_U16(SFF_A2_TX_PWR_LWARN);

 	sd->rx_power[MCURR] = A2_OFFSET_TO_U16(SFF_A2_RX_PWR);
 	sd->rx_power[HALRM] = A2_OFFSET_TO_U16(SFF_A2_RX_PWR_HALRM);
 	sd->rx_power[LALRM] = A2_OFFSET_TO_U16(SFF_A2_RX_PWR_LALRM);
 	sd->rx_power[HWARN] = A2_OFFSET_TO_U16(SFF_A2_RX_PWR_HWARN);
 	sd->rx_power[LWARN] = A2_OFFSET_TO_U16(SFF_A2_RX_PWR_LWARN);

 	sd->sfp_temp[MCURR] = A2_OFFSET_TO_TEMP(SFF_A2_TEMP);
 	sd->sfp_temp[HALRM] = A2_OFFSET_TO_TEMP(SFF_A2_TEMP_HALRM);
 	sd->sfp_temp[LALRM] = A2_OFFSET_TO_TEMP(SFF_A2_TEMP_LALRM);
 	sd->sfp_temp[HWARN] = A2_OFFSET_TO_TEMP(SFF_A2_TEMP_HWARN);
 	sd->sfp_temp[LWARN] = A2_OFFSET_TO_TEMP(SFF_A2_TEMP_LWARN);
 }

 /* Converts to a float from a big-endian 4-byte source buffer. */
 static float befloattoh(const __u32 *source)
 {
 	union {
 		__u32 src;
 		float dst;
 	} converter;

 	converter.src = ntohl(*source);
 	return converter.dst;
 }

 static void sff8472_calibration(const __u8 *id, struct sff_diags *sd)
 {
 	int i;
 	__u16 rx_reading;

 	/* Calibration should occur for all values (threshold and current) */
 	for (i = 0; i < ARRAY_SIZE(sd->bias_cur); ++i) {
 		/*
 		 * Apply calibration formula 1 (Temp., Voltage, Bias, Tx Power)
 		 */
 		sd->bias_cur[i]    *= A2_OFFSET_TO_SLP(SFF_A2_CAL_TXI_SLP);
 		sd->tx_power[i]    *= A2_OFFSET_TO_SLP(SFF_A2_CAL_TXPWR_SLP);
 		sd->sfp_voltage[i] *= A2_OFFSET_TO_SLP(SFF_A2_CAL_V_SLP);
 		sd->sfp_temp[i]    *= A2_OFFSET_TO_SLP(SFF_A2_CAL_T_SLP);

 		sd->bias_cur[i]    += A2_OFFSET_TO_OFF(SFF_A2_CAL_TXI_OFF);
 		sd->tx_power[i]    += A2_OFFSET_TO_OFF(SFF_A2_CAL_TXPWR_OFF);
 		sd->sfp_voltage[i] += A2_OFFSET_TO_OFF(SFF_A2_CAL_V_OFF);
 		sd->sfp_temp[i]    += A2_OFFSET_TO_OFF(SFF_A2_CAL_T_OFF);

 		/*
 		 * Apply calibration formula 2 (Rx Power only)
 		 */
 		rx_reading = sd->rx_power[i];
 		sd->rx_power[i]    = A2_OFFSET_TO_RXPWRx(SFF_A2_CAL_RXPWR0);
 		sd->rx_power[i]    += rx_reading *
 			A2_OFFSET_TO_RXPWRx(SFF_A2_CAL_RXPWR1);
 		sd->rx_power[i]    += rx_reading *
 			A2_OFFSET_TO_RXPWRx(SFF_A2_CAL_RXPWR2);
 		sd->rx_power[i]    += rx_reading *
 			A2_OFFSET_TO_RXPWRx(SFF_A2_CAL_RXPWR3);
 	}
 }

 static void sff8472_parse_eeprom(const __u8 *id, struct sff_diags *sd)
 {
 	sd->supports_dom = id[SFF_A0_DOM] & SFF_A0_DOM_IMPL;
 	sd->supports_alarms = id[SFF_A0_OPTIONS] & SFF_A0_OPTIONS_AW;
 	sd->calibrated_ext = id[SFF_A0_DOM] & SFF_A0_DOM_EXTCAL;
 	sd->rx_power_type = id[SFF_A0_DOM] & SFF_A0_DOM_PWRT;

 	sff8472_dom_parse(id, sd);

 	/*
 	 * If the SFP is externally calibrated, we need to read calibration data
 	 * and compensate the already stored readings.
 	 */
 	if (sd->calibrated_ext)
 		sff8472_calibration(id, sd);
 }

 void sff8472_show_all(const __u8 *id)
 {
 	struct sff_diags sd;
 	char *rx_power_string = NULL;
 	int i;

 	sff8472_parse_eeprom(id, &sd);

 	if (!sd.supports_dom) {
 		printf("\t%-41s : No\n", "Optical diagnostics support");
 		return;
 	}
 	printf("\t%-41s : Yes\n", "Optical diagnostics support");

 	PRINT_BIAS("Laser bias current", sd.bias_cur[MCURR]);
 	PRINT_xX_PWR("Laser output power", sd.tx_power[MCURR]);

 	if (!sd.rx_power_type)
 		rx_power_string = "Receiver signal OMA";
 	else
 		rx_power_string = "Receiver signal average optical power";

 	PRINT_xX_PWR(rx_power_string, sd.rx_power[MCURR]);

 	PRINT_TEMP("Module temperature", sd.sfp_temp[MCURR]);
 	PRINT_VCC("Module voltage", sd.sfp_voltage[MCURR]);

 	printf("\t%-41s : %s\n", "Alarm/warning flags implemented",
 	       (sd.supports_alarms ? "Yes" : "No"));
 	if (sd.supports_alarms) {

 		for (i = 0; sff8472_aw_flags[i].str; ++i) {
 			printf("\t%-41s : %s\n", sff8472_aw_flags[i].str,
 			       id[SFF_A2_BASE + sff8472_aw_flags[i].offset]
 			       & sff8472_aw_flags[i].value ? "On" : "Off");
 		}
 		sff_show_thresholds(sd);
 	}
 }
	/*
	* sfpdiag.c: Implements SFF-8472 optics diagnostics.
	*
	* Aurelien Guillaume <aurelien@iwi.me> (C) 2012
	* This implementation is loosely based on DOM patches
	* from Robert Olsson <robert@herjulf.se> (C) 2009
	* and SFF-8472 specs (ftp://ftp.seagate.com/pub/sff/SFF-8472.PDF)
	* by SFF Committee.
	*/

	#include <stdio.h>
	#include <math.h>
	#include <arpa/inet.h>
	#include "internal.h"
	#include "sff-common.h"

	/* Offsets in decimal, for direct comparison with the SFF specs */

	/* A0-based EEPROM offsets for DOM support checks */
	#define SFF_A0_DOM 92
	#define SFF_A0_OPTIONS 93
	#define SFF_A0_COMP 94

	/* EEPROM bit values for various registers */
	#define SFF_A0_DOM_EXTCAL (1 << 4)
	#define SFF_A0_DOM_INTCAL (1 << 5)
	#define SFF_A0_DOM_IMPL (1 << 6)
	#define SFF_A0_DOM_PWRT (1 << 3)

	#define SFF_A0_OPTIONS_AW (1 << 7)

	/*
	* See ethtool.c comments about SFF-8472, this is the offset
	* at which the A2 page is in the EEPROM blob returned by the
	* kernel.
	*/
	#define SFF_A2_BASE 0x100

	/* A2-based offsets for DOM */
	#define SFF_A2_TEMP 96
	#define SFF_A2_TEMP_HALRM 0
	#define SFF_A2_TEMP_LALRM 2
	#define SFF_A2_TEMP_HWARN 4
	#define SFF_A2_TEMP_LWARN 6

	#define SFF_A2_VCC 98
	#define SFF_A2_VCC_HALRM 8
	#define SFF_A2_VCC_LALRM 10
	#define SFF_A2_VCC_HWARN 12
	#define SFF_A2_VCC_LWARN 14

	#define SFF_A2_BIAS 100
	#define SFF_A2_BIAS_HALRM 16
	#define SFF_A2_BIAS_LALRM 18
	#define SFF_A2_BIAS_HWARN 20
	#define SFF_A2_BIAS_LWARN 22

	#define SFF_A2_TX_PWR 102
	#define SFF_A2_TX_PWR_HALRM 24
	#define SFF_A2_TX_PWR_LALRM 26
	#define SFF_A2_TX_PWR_HWARN 28
	#define SFF_A2_TX_PWR_LWARN 30

	#define SFF_A2_RX_PWR 104
	#define SFF_A2_RX_PWR_HALRM 32
	#define SFF_A2_RX_PWR_LALRM 34
	#define SFF_A2_RX_PWR_HWARN 36
	#define SFF_A2_RX_PWR_LWARN 38

	#define SFF_A2_ALRM_FLG 112
	#define SFF_A2_WARN_FLG 116

	/* 32-bit little-endian calibration constants */
	#define SFF_A2_CAL_RXPWR4 56
	#define SFF_A2_CAL_RXPWR3 60
	#define SFF_A2_CAL_RXPWR2 64
	#define SFF_A2_CAL_RXPWR1 68
	#define SFF_A2_CAL_RXPWR0 72

	/* 16-bit little endian calibration constants */
	#define SFF_A2_CAL_TXI_SLP 76
	#define SFF_A2_CAL_TXI_OFF 78
	#define SFF_A2_CAL_TXPWR_SLP 80
	#define SFF_A2_CAL_TXPWR_OFF 82
	#define SFF_A2_CAL_T_SLP 84
	#define SFF_A2_CAL_T_OFF 86
	#define SFF_A2_CAL_V_SLP 88
	#define SFF_A2_CAL_V_OFF 90

	static struct sff8472_aw_flags {
	const char str; / Human-readable string, null at the end */
	int offset; /* A2-relative address offset */
	__u8 value; /* Alarm is on if (offset & value) != 0. */
	} sff8472_aw_flags[] = {
	{ "Laser bias current high alarm", SFF_A2_ALRM_FLG, (1 << 3) },
	{ "Laser bias current low alarm", SFF_A2_ALRM_FLG, (1 << 2) },
	{ "Laser bias current high warning", SFF_A2_WARN_FLG, (1 << 3) },
	{ "Laser bias current low warning", SFF_A2_WARN_FLG, (1 << 2) },

	{ "Laser output power high alarm", SFF_A2_ALRM_FLG, (1 << 1) },
	{ "Laser output power low alarm", SFF_A2_ALRM_FLG, (1 << 0) },
	{ "Laser output power high warning", SFF_A2_WARN_FLG, (1 << 1) },
	{ "Laser output power low warning", SFF_A2_WARN_FLG, (1 << 0) },

	{ "Module temperature high alarm", SFF_A2_ALRM_FLG, (1 << 7) },
	{ "Module temperature low alarm", SFF_A2_ALRM_FLG, (1 << 6) },
	{ "Module temperature high warning", SFF_A2_WARN_FLG, (1 << 7) },
	{ "Module temperature low warning", SFF_A2_WARN_FLG, (1 << 6) },

	{ "Module voltage high alarm", SFF_A2_ALRM_FLG, (1 << 5) },
	{ "Module voltage low alarm", SFF_A2_ALRM_FLG, (1 << 4) },
	{ "Module voltage high warning", SFF_A2_WARN_FLG, (1 << 5) },
	{ "Module voltage low warning", SFF_A2_WARN_FLG, (1 << 4) },

	{ "Laser rx power high alarm", SFF_A2_ALRM_FLG + 1, (1 << 7) },
	{ "Laser rx power low alarm", SFF_A2_ALRM_FLG + 1, (1 << 6) },
	{ "Laser rx power high warning", SFF_A2_WARN_FLG + 1, (1 << 7) },
	{ "Laser rx power low warning", SFF_A2_WARN_FLG + 1, (1 << 6) },

	{ NULL, 0, 0 },
	};

	/* Most common case: 16-bit unsigned integer in a certain unit */
	#define A2_OFFSET_TO_U16(offset) \
	(id[SFF_A2_BASE + (offset)] << 8 \| id[SFF_A2_BASE + (offset) + 1])

	/* Calibration slope is a number between 0.0 included and 256.0 excluded. */
	#define A2_OFFSET_TO_SLP(offset) \
	(id[SFF_A2_BASE + (offset)] + id[SFF_A2_BASE + (offset) + 1] / 256.)

	/* Calibration offset is an integer from -32768 to 32767 */
	#define A2_OFFSET_TO_OFF(offset) \
	((__s16)A2_OFFSET_TO_U16(offset))

	/* RXPWR(x) are IEEE-754 floating point numbers in big-endian format */
	#define A2_OFFSET_TO_RXPWRx(offset) \
	(befloattoh((__u32 *)(id + SFF_A2_BASE + (offset))))

	/*
	* 2-byte internal temperature conversions:
	* First byte is a signed 8-bit integer, which is the temp decimal part
	* Second byte are 1/256th of degree, which are added to the dec part.
	*/
	#define A2_OFFSET_TO_TEMP(offset) ((__s16)A2_OFFSET_TO_U16(offset))

	static void sff8472_dom_parse(const __u8 id, struct sff_diags sd)
	{
	sd->bias_cur[MCURR] = A2_OFFSET_TO_U16(SFF_A2_BIAS);
	sd->bias_cur[HALRM] = A2_OFFSET_TO_U16(SFF_A2_BIAS_HALRM);
	sd->bias_cur[LALRM] = A2_OFFSET_TO_U16(SFF_A2_BIAS_LALRM);
	sd->bias_cur[HWARN] = A2_OFFSET_TO_U16(SFF_A2_BIAS_HWARN);
	sd->bias_cur[LWARN] = A2_OFFSET_TO_U16(SFF_A2_BIAS_LWARN);

	sd->sfp_voltage[MCURR] = A2_OFFSET_TO_U16(SFF_A2_VCC);
	sd->sfp_voltage[HALRM] = A2_OFFSET_TO_U16(SFF_A2_VCC_HALRM);
	sd->sfp_voltage[LALRM] = A2_OFFSET_TO_U16(SFF_A2_VCC_LALRM);
	sd->sfp_voltage[HWARN] = A2_OFFSET_TO_U16(SFF_A2_VCC_HWARN);
	sd->sfp_voltage[LWARN] = A2_OFFSET_TO_U16(SFF_A2_VCC_LWARN);

	sd->tx_power[MCURR] = A2_OFFSET_TO_U16(SFF_A2_TX_PWR);
	sd->tx_power[HALRM] = A2_OFFSET_TO_U16(SFF_A2_TX_PWR_HALRM);
	sd->tx_power[LALRM] = A2_OFFSET_TO_U16(SFF_A2_TX_PWR_LALRM);
	sd->tx_power[HWARN] = A2_OFFSET_TO_U16(SFF_A2_TX_PWR_HWARN);
	sd->tx_power[LWARN] = A2_OFFSET_TO_U16(SFF_A2_TX_PWR_LWARN);

	sd->rx_power[MCURR] = A2_OFFSET_TO_U16(SFF_A2_RX_PWR);
	sd->rx_power[HALRM] = A2_OFFSET_TO_U16(SFF_A2_RX_PWR_HALRM);
	sd->rx_power[LALRM] = A2_OFFSET_TO_U16(SFF_A2_RX_PWR_LALRM);
	sd->rx_power[HWARN] = A2_OFFSET_TO_U16(SFF_A2_RX_PWR_HWARN);
	sd->rx_power[LWARN] = A2_OFFSET_TO_U16(SFF_A2_RX_PWR_LWARN);

	sd->sfp_temp[MCURR] = A2_OFFSET_TO_TEMP(SFF_A2_TEMP);
	sd->sfp_temp[HALRM] = A2_OFFSET_TO_TEMP(SFF_A2_TEMP_HALRM);
	sd->sfp_temp[LALRM] = A2_OFFSET_TO_TEMP(SFF_A2_TEMP_LALRM);
	sd->sfp_temp[HWARN] = A2_OFFSET_TO_TEMP(SFF_A2_TEMP_HWARN);
	sd->sfp_temp[LWARN] = A2_OFFSET_TO_TEMP(SFF_A2_TEMP_LWARN);
	}

	/* Converts to a float from a big-endian 4-byte source buffer. */
	static float befloattoh(const __u32 *source)
	{
	union {
	__u32 src;
	float dst;
	} converter;

	converter.src = ntohl(*source);
	return converter.dst;
	}

	static void sff8472_calibration(const __u8 id, struct sff_diags sd)
	{
	int i;
	__u16 rx_reading;

	/* Calibration should occur for all values (threshold and current) */
	for (i = 0; i < ARRAY_SIZE(sd->bias_cur); ++i) {
	/*
	* Apply calibration formula 1 (Temp., Voltage, Bias, Tx Power)
	*/
	sd->bias_cur[i] *= A2_OFFSET_TO_SLP(SFF_A2_CAL_TXI_SLP);
	sd->tx_power[i] *= A2_OFFSET_TO_SLP(SFF_A2_CAL_TXPWR_SLP);
	sd->sfp_voltage[i] *= A2_OFFSET_TO_SLP(SFF_A2_CAL_V_SLP);
	sd->sfp_temp[i] *= A2_OFFSET_TO_SLP(SFF_A2_CAL_T_SLP);

	sd->bias_cur[i] += A2_OFFSET_TO_OFF(SFF_A2_CAL_TXI_OFF);
	sd->tx_power[i] += A2_OFFSET_TO_OFF(SFF_A2_CAL_TXPWR_OFF);
	sd->sfp_voltage[i] += A2_OFFSET_TO_OFF(SFF_A2_CAL_V_OFF);
	sd->sfp_temp[i] += A2_OFFSET_TO_OFF(SFF_A2_CAL_T_OFF);

	/*
	* Apply calibration formula 2 (Rx Power only)
	*/
	rx_reading = sd->rx_power[i];
	sd->rx_power[i] = A2_OFFSET_TO_RXPWRx(SFF_A2_CAL_RXPWR0);
	sd->rx_power[i] += rx_reading *
	A2_OFFSET_TO_RXPWRx(SFF_A2_CAL_RXPWR1);
	sd->rx_power[i] += rx_reading *
	A2_OFFSET_TO_RXPWRx(SFF_A2_CAL_RXPWR2);
	sd->rx_power[i] += rx_reading *
	A2_OFFSET_TO_RXPWRx(SFF_A2_CAL_RXPWR3);
	}
	}

	static void sff8472_parse_eeprom(const __u8 id, struct sff_diags sd)
	{
	sd->supports_dom = id[SFF_A0_DOM] & SFF_A0_DOM_IMPL;
	sd->supports_alarms = id[SFF_A0_OPTIONS] & SFF_A0_OPTIONS_AW;
	sd->calibrated_ext = id[SFF_A0_DOM] & SFF_A0_DOM_EXTCAL;
	sd->rx_power_type = id[SFF_A0_DOM] & SFF_A0_DOM_PWRT;

	sff8472_dom_parse(id, sd);

	/*
	* If the SFP is externally calibrated, we need to read calibration data
	* and compensate the already stored readings.
	*/
	if (sd->calibrated_ext)
	sff8472_calibration(id, sd);
	}

	void sff8472_show_all(const __u8 *id)
	{
	struct sff_diags sd;
	char *rx_power_string = NULL;
	int i;

	sff8472_parse_eeprom(id, &sd);

	if (!sd.supports_dom) {
	printf("\t%-41s : No\n", "Optical diagnostics support");
	return;
	}
	printf("\t%-41s : Yes\n", "Optical diagnostics support");

	PRINT_BIAS("Laser bias current", sd.bias_cur[MCURR]);
	PRINT_xX_PWR("Laser output power", sd.tx_power[MCURR]);

	if (!sd.rx_power_type)
	rx_power_string = "Receiver signal OMA";
	else
	rx_power_string = "Receiver signal average optical power";

	PRINT_xX_PWR(rx_power_string, sd.rx_power[MCURR]);

	PRINT_TEMP("Module temperature", sd.sfp_temp[MCURR]);
	PRINT_VCC("Module voltage", sd.sfp_voltage[MCURR]);

	printf("\t%-41s : %s\n", "Alarm/warning flags implemented",
	(sd.supports_alarms ? "Yes" : "No"));
	if (sd.supports_alarms) {

	for (i = 0; sff8472_aw_flags[i].str; ++i) {
	printf("\t%-41s : %s\n", sff8472_aw_flags[i].str,
	id[SFF_A2_BASE + sff8472_aw_flags[i].offset]
	& sff8472_aw_flags[i].value ? "On" : "Off");
	}
	sff_show_thresholds(sd);
	}
	}