| #!/bin/bash |
| # SPDX-License-Identifier: GPL-2.0 |
| # Copyright (C) 2020 SUSE Linux Products GmbH. All Rights Reserved. |
| # |
| # FS QA Test No. ceph/001 |
| # |
| # Test remote copy operation (CEPH_OSD_OP_COPY_FROM) with several combinations |
| # of both object sizes and copy sizes. It also uses several combinations of |
| # copy ranges. For example, copying the 1st object in the src file into |
| # 1) the beginning (1st object) of dst file, 2) the end (last object) of dst |
| # file and 3) the middle of the dst file. |
| # |
| . ./common/preamble |
| _begin_fstest auto quick copy_range |
| |
| # get standard environment |
| . common/filter |
| . common/attr |
| . common/reflink |
| |
| # real QA test starts here |
| _supported_fs ceph |
| |
| _require_xfs_io_command "copy_range" |
| _require_attrs |
| _require_test |
| |
| workdir=$TEST_DIR/test-$seq |
| rm -rf $workdir |
| mkdir $workdir |
| |
| check_range() |
| { |
| local file=$1 |
| local off0=$2 |
| local off1=$3 |
| local val=$4 |
| _read_range $file $off0 $off1 | grep -v -q $val |
| [ $? -eq 0 ] && echo "file $file is not '$val' in [ $off0 $off1 ]" |
| } |
| |
| run_copy_range_tests() |
| { |
| objsz=$1 |
| halfobj=$(($objsz / 2)) |
| file="$workdir/file-$objsz" |
| copy="$workdir/copy-$objsz" |
| dest="$workdir/dest-$objsz" |
| |
| # create files and set file layout, which needs to be done before |
| # writing any data |
| _ceph_create_file_layout $file $objsz 1 $objsz |
| _ceph_create_file_layout $copy $objsz 1 $objsz |
| _ceph_create_file_layout $dest $objsz 1 $objsz |
| |
| # file containing 3 objects with 'aaaa|bbbb|cccc' |
| $XFS_IO_PROG -c "pwrite -S 0x61 0 $objsz" $file >> $seqres.full 2>&1 |
| $XFS_IO_PROG -c "pwrite -S 0x62 $objsz $objsz" $file >> $seqres.full 2>&1 |
| $XFS_IO_PROG -c "pwrite -S 0x63 $(($objsz * 2)) $objsz" $file >> $seqres.full 2>&1 |
| |
| echo " Copy whole file (3 objects):" |
| echo " aaaa|bbbb|cccc => aaaa|bbbb|cccc" |
| $XFS_IO_PROG -c "copy_range -s 0 -d 0 -l $(($objsz * 3)) $file" "$copy" |
| cmp $file $copy |
| |
| echo " Copy single object to beginning:" |
| # dest file with 3 objects with 'dddd|dddd|dddd' |
| $XFS_IO_PROG -c "pwrite -S 0x64 0 $(($objsz * 3))" $dest >> $seqres.full 2>&1 |
| |
| echo " dddd|dddd|dddd => aaaa|dddd|dddd" |
| $XFS_IO_PROG -c "copy_range -s 0 -d 0 -l $objsz $file" "$dest" |
| check_range $dest 0 $objsz 61 |
| check_range $dest $objsz $(($objsz * 2)) 64 |
| |
| echo " aaaa|dddd|dddd => bbbb|dddd|dddd" |
| $XFS_IO_PROG -c "copy_range -s $objsz -d 0 -l $objsz $file" "$dest" |
| check_range $dest 0 $objsz 62 |
| check_range $dest $objsz $(($objsz * 2)) 64 |
| |
| echo " bbbb|dddd|dddd => cccc|dddd|dddd" |
| $XFS_IO_PROG -c "copy_range -s $(($objsz * 2)) -d 0 -l $objsz $file" "$dest" |
| check_range $dest 0 $objsz 63 |
| check_range $dest $objsz $(($objsz * 2)) 64 |
| |
| echo " Copy single object to middle:" |
| |
| echo " cccc|dddd|dddd => cccc|aaaa|dddd" |
| $XFS_IO_PROG -c "copy_range -s 0 -d $objsz -l $objsz $file" "$dest" |
| check_range $dest 0 $objsz 63 |
| check_range $dest $objsz $objsz 61 |
| check_range $dest $(($objsz * 2)) $objsz 64 |
| |
| echo " cccc|aaaa|dddd => cccc|bbbb|dddd" |
| $XFS_IO_PROG -c "copy_range -s $objsz -d $objsz -l $objsz $file" "$dest" |
| check_range $dest 0 $objsz 63 |
| check_range $dest $objsz $objsz 62 |
| check_range $dest $(($objsz * 2)) $objsz 64 |
| |
| echo " cccc|bbbb|dddd => cccc|cccc|dddd" |
| $XFS_IO_PROG -c "copy_range -s $((objsz * 2)) -d $objsz -l $objsz $file" "$dest" |
| check_range $dest 0 $objsz 63 |
| check_range $dest $objsz $objsz 63 |
| check_range $dest $(($objsz * 2)) $objsz 64 |
| |
| echo " Copy single object to end:" |
| |
| echo " cccc|cccc|dddd => cccc|cccc|aaaa" |
| $XFS_IO_PROG -c "copy_range -s 0 -d $(($objsz * 2)) -l $objsz $file" "$dest" |
| check_range $dest 0 $(($objsz * 2)) 63 |
| check_range $dest $(($objsz * 2)) $objsz 61 |
| |
| echo " cccc|cccc|aaaa => cccc|cccc|bbbb" |
| $XFS_IO_PROG -c "copy_range -s $objsz -d $(($objsz * 2)) -l $objsz $file" "$dest" |
| check_range $dest 0 $(($objsz * 2)) 63 |
| check_range $dest $(($objsz * 2)) $objsz 62 |
| |
| echo " cccc|cccc|aaaa => cccc|cccc|cccc" |
| $XFS_IO_PROG -c "copy_range -s $(($objsz * 2)) -d $(($objsz * 2)) -l $objsz $file" "$dest" |
| check_range $dest 0 $(($objsz * 3)) 63 |
| |
| echo " Copy 2 objects to beginning:" |
| |
| echo " cccc|cccc|cccc => aaaa|bbbb|cccc" |
| $XFS_IO_PROG -c "copy_range -s 0 -d 0 -l $(($objsz * 2)) $file" "$dest" |
| cmp $file $dest |
| |
| echo " aaaa|bbbb|cccc => bbbb|cccc|cccc" |
| $XFS_IO_PROG -c "copy_range -s $objsz -d 0 -l $(($objsz * 2)) $file" "$dest" |
| check_range $dest 0 $objsz 62 |
| check_range $dest $objsz $(($objsz * 2)) 63 |
| |
| echo " Copy 2 objects to end:" |
| |
| echo " bbbb|cccc|cccc => bbbb|aaaa|bbbb" |
| $XFS_IO_PROG -c "copy_range -s 0 -d $objsz -l $(($objsz * 2)) $file" "$dest" |
| check_range $dest 0 $objsz 62 |
| check_range $dest $objsz $objsz 61 |
| check_range $dest $(($objsz * 2)) $objsz 62 |
| |
| echo " bbbb|aaaa|bbbb => bbbb|bbbb|cccc" |
| $XFS_IO_PROG -c "copy_range -s $objsz -d $objsz -l $(($objsz * 2)) $file" "$dest" |
| check_range $dest 0 $(($objsz * 2)) 62 |
| check_range $dest $(($objsz * 2)) $objsz 63 |
| |
| echo " Append 1 object:" |
| |
| echo " bbbb|bbbb|cccc => bbbb|bbbb|cccc|aaaa" |
| $XFS_IO_PROG -c "copy_range -s 0 -d $(($objsz * 3)) -l $objsz $file" "$dest" |
| check_range $dest 0 $(($objsz * 2)) 62 |
| check_range $dest $(($objsz * 2)) $objsz 63 |
| check_range $dest $(($objsz * 3)) $objsz 61 |
| |
| echo " Cross object boundary (no full object copy)" |
| echo " dddd|dddd|dddd|dddd => ddaa|aadd|dddd|dddd" |
| $XFS_IO_PROG -c "pwrite -S 0x64 0 $(($objsz * 4))" $dest >> $seqres.full 2>&1 |
| $XFS_IO_PROG -c "copy_range -s 0 -d $halfobj -l $objsz $file" "$dest" |
| check_range $dest 0 $halfobj 64 |
| check_range $dest $halfobj $objsz 61 |
| check_range $dest $(($objsz + $halfobj)) $(($objsz * 2 + $halfobj)) 64 |
| |
| echo " dddd|dddd|dddd|dddd => ddaa|bbdd|dddd|dddd" |
| $XFS_IO_PROG -c "pwrite -S 0x64 0 $(($objsz * 4))" $dest >> $seqres.full 2>&1 |
| $XFS_IO_PROG -c "copy_range -s $halfobj -d $halfobj -l $objsz $file" "$dest" |
| check_range $dest 0 $halfobj 64 |
| check_range $dest $halfobj $halfobj 61 |
| check_range $dest $objsz $halfobj 62 |
| check_range $dest $(($objsz + $halfobj)) $(($objsz * 2 + $halfobj)) 64 |
| |
| echo " Cross object boundaries (with full object copy)" |
| echo " dddd|dddd|dddd|dddd => ddaa|bbbb|dddd|dddd" |
| $XFS_IO_PROG -c "pwrite -S 0x64 0 $(($objsz * 4))" $dest >> $seqres.full 2>&1 |
| $XFS_IO_PROG -c "copy_range -s $halfobj -d $halfobj -l $(($objsz + $halfobj)) $file" "$dest" |
| check_range $dest 0 $halfobj 64 |
| check_range $dest $halfobj $halfobj 61 |
| check_range $dest $objsz $objsz 62 |
| check_range $dest $(($objsz * 2)) $(($objsz * 2)) 64 |
| |
| echo " dddd|dddd|dddd|dddd => ddaa|bbbb|ccdd|dddd" |
| $XFS_IO_PROG -c "pwrite -S 0x64 0 $(($objsz * 4))" $dest >> $seqres.full 2>&1 |
| $XFS_IO_PROG -c "copy_range -s $halfobj -d $halfobj -l $(($objsz * 2)) $file" "$dest" |
| check_range $dest 0 $halfobj 64 |
| check_range $dest $halfobj $halfobj 61 |
| check_range $dest $objsz $objsz 62 |
| check_range $dest $(($objsz * 2)) $halfobj 63 |
| check_range $dest $(($objsz * 2 + $halfobj)) $(($objsz + $halfobj)) 64 |
| |
| echo " dddd|dddd|dddd|dddd => dddd|aaaa|bbdd|dddd" |
| $XFS_IO_PROG -c "pwrite -S 0x64 0 $(($objsz * 4))" $dest >> $seqres.full 2>&1 |
| $XFS_IO_PROG -c "copy_range -s 0 -d $objsz -l $(($objsz + $halfobj)) $file" "$dest" |
| check_range $dest 0 $objsz 64 |
| check_range $dest $objsz $objsz 61 |
| check_range $dest $(($objsz * 2)) $halfobj 62 |
| check_range $dest $(($objsz * 2 + $halfobj)) $(($objsz + $halfobj)) 64 |
| |
| echo " Cross object boundaries (with 2 full object copies)" |
| echo " dddd|dddd|dddd|dddd => ddaa|aabb|bbcc|ccdd" |
| $XFS_IO_PROG -c "pwrite -S 0x64 0 $(($objsz * 4))" $dest >> $seqres.full 2>&1 |
| $XFS_IO_PROG -c "copy_range -s 0 -d $halfobj -l $(($objsz * 3)) $file" "$dest" |
| check_range $dest 0 $halfobj 64 |
| check_range $dest $halfobj $objsz 61 |
| check_range $dest $(($objsz + $halfobj)) $objsz 62 |
| check_range $dest $(($objsz * 2 + $halfobj)) $objsz 63 |
| check_range $dest $(($objsz * 3 + $halfobj)) $halfobj 64 |
| |
| } |
| |
| echo "Object size: 65536" # CEPH_MIN_STRIPE_UNIT |
| run_copy_range_tests 65536 |
| echo "Object size: 1M" |
| run_copy_range_tests 1048576 |
| echo "Object size: 4M" |
| run_copy_range_tests 4194304 |
| # the max object size is 1TB, but by default OSDs only accept a max of 128M objects |
| echo "Object size: 128M" |
| run_copy_range_tests 134217728 |
| |
| # success, all done |
| status=0 |
| exit |