| // SPDX-License-Identifier: GPL-2.0+ | |
| /dts-v1/; | |
| #include "aspeed-g5.dtsi" | |
| #include <dt-bindings/gpio/aspeed-gpio.h> | |
| #include <dt-bindings/leds/leds-pca955x.h> | |
| / { | |
| model = "Mowgli BMC"; | |
| compatible = "ibm,mowgli-bmc", "aspeed,ast2500"; | |
| chosen { | |
| stdout-path = &uart5; | |
| bootargs = "console=ttyS4,115200 earlyprintk"; | |
| }; | |
| memory@80000000 { | |
| reg = <0x80000000 0x20000000>; | |
| }; | |
| reserved-memory { | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| ranges; | |
| flash_memory: region@98000000 { | |
| no-map; | |
| reg = <0x98000000 0x04000000>; /* 64M */ | |
| }; | |
| gfx_memory: framebuffer { | |
| size = <0x01000000>; | |
| alignment = <0x01000000>; | |
| compatible = "shared-dma-pool"; | |
| reusable; | |
| }; | |
| video_engine_memory: jpegbuffer { | |
| size = <0x02000000>; | |
| alignment = <0x01000000>; | |
| compatible = "shared-dma-pool"; | |
| reusable; | |
| }; | |
| }; | |
| gpio-keys { | |
| compatible = "gpio-keys"; | |
| air-water { | |
| label = "air-water"; | |
| gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>; | |
| linux,code = <ASPEED_GPIO(F, 6)>; | |
| }; | |
| checkstop { | |
| label = "checkstop"; | |
| gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; | |
| linux,code = <ASPEED_GPIO(J, 2)>; | |
| }; | |
| ps0-presence { | |
| label = "ps0-presence"; | |
| gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>; | |
| linux,code = <ASPEED_GPIO(Z, 2)>; | |
| }; | |
| ps1-presence { | |
| label = "ps1-presence"; | |
| gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>; | |
| linux,code = <ASPEED_GPIO(Z, 0)>; | |
| }; | |
| id-button { | |
| label = "id-button"; | |
| gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>; | |
| linux,code = <ASPEED_GPIO(F, 1)>; | |
| }; | |
| }; | |
| gpio-keys-polled { | |
| compatible = "gpio-keys-polled"; | |
| poll-interval = <1000>; | |
| fan0-presence { | |
| label = "fan0-presence"; | |
| gpios = <&pca9552 9 GPIO_ACTIVE_LOW>; | |
| linux,code = <9>; | |
| }; | |
| fan1-presence { | |
| label = "fan1-presence"; | |
| gpios = <&pca9552 10 GPIO_ACTIVE_LOW>; | |
| linux,code = <10>; | |
| }; | |
| fan2-presence { | |
| label = "fan2-presence"; | |
| gpios = <&pca9552 11 GPIO_ACTIVE_LOW>; | |
| linux,code = <11>; | |
| }; | |
| fan3-presence { | |
| label = "fan3-presence"; | |
| gpios = <&pca9552 12 GPIO_ACTIVE_LOW>; | |
| linux,code = <12>; | |
| }; | |
| fan4-presence { | |
| label = "fan4-presence"; | |
| gpios = <&pca9552 13 GPIO_ACTIVE_LOW>; | |
| linux,code = <13>; | |
| }; | |
| }; | |
| leds { | |
| compatible = "gpio-leds"; | |
| front-fault { | |
| retain-state-shutdown; | |
| default-state = "keep"; | |
| gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>; | |
| }; | |
| power-button { | |
| retain-state-shutdown; | |
| default-state = "keep"; | |
| gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_LOW>; | |
| }; | |
| front-id { | |
| retain-state-shutdown; | |
| default-state = "keep"; | |
| gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>; | |
| }; | |
| fan0 { | |
| retain-state-shutdown; | |
| default-state = "keep"; | |
| gpios = <&pca9552 0 GPIO_ACTIVE_LOW>; | |
| }; | |
| fan1 { | |
| retain-state-shutdown; | |
| default-state = "keep"; | |
| gpios = <&pca9552 1 GPIO_ACTIVE_LOW>; | |
| }; | |
| fan2 { | |
| retain-state-shutdown; | |
| default-state = "keep"; | |
| gpios = <&pca9552 2 GPIO_ACTIVE_LOW>; | |
| }; | |
| fan3 { | |
| retain-state-shutdown; | |
| default-state = "keep"; | |
| gpios = <&pca9552 3 GPIO_ACTIVE_LOW>; | |
| }; | |
| fan4 { | |
| retain-state-shutdown; | |
| default-state = "keep"; | |
| gpios = <&pca9552 4 GPIO_ACTIVE_LOW>; | |
| }; | |
| }; | |
| fsi: gpio-fsi { | |
| compatible = "fsi-master-gpio", "fsi-master"; | |
| #address-cells = <2>; | |
| #size-cells = <0>; | |
| no-gpio-delays; | |
| clock-gpios = <&gpio ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>; | |
| data-gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_HIGH>; | |
| mux-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>; | |
| enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>; | |
| trans-gpios = <&gpio ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>; | |
| }; | |
| iio-hwmon-12v { | |
| compatible = "iio-hwmon"; | |
| io-channels = <&adc 0>; | |
| }; | |
| iio-hwmon-5v { | |
| compatible = "iio-hwmon"; | |
| io-channels = <&adc 1>; | |
| }; | |
| iio-hwmon-3v { | |
| compatible = "iio-hwmon"; | |
| io-channels = <&adc 2>; | |
| }; | |
| iio-hwmon-vdd { | |
| compatible = "iio-hwmon"; | |
| io-channels = <&adc 3>; | |
| }; | |
| iio-hwmon-vcs { | |
| compatible = "iio-hwmon"; | |
| io-channels = <&adc 5>; | |
| }; | |
| iio-hwmon-vdn { | |
| compatible = "iio-hwmon"; | |
| io-channels = <&adc 7>; | |
| }; | |
| iio-hwmon-vio { | |
| compatible = "iio-hwmon"; | |
| io-channels = <&adc 9>; | |
| }; | |
| iio-hwmon-vddra { | |
| compatible = "iio-hwmon"; | |
| io-channels = <&adc 11>; | |
| }; | |
| iio-hwmon-battery { | |
| compatible = "iio-hwmon"; | |
| io-channels = <&adc 12>; | |
| }; | |
| iio-hwmon-vddrb { | |
| compatible = "iio-hwmon"; | |
| io-channels = <&adc 13>; | |
| }; | |
| }; | |
| &pwm_tacho { | |
| status = "okay"; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default | |
| &pinctrl_pwm2_default &pinctrl_pwm3_default | |
| &pinctrl_pwm4_default>; | |
| fan@0 { | |
| reg = <0x00>; | |
| aspeed,fan-tach-ch = /bits/ 8 <0x00>; | |
| }; | |
| fan@1 { | |
| reg = <0x01>; | |
| aspeed,fan-tach-ch = /bits/ 8 <0x01>; | |
| }; | |
| fan@2 { | |
| reg = <0x02>; | |
| aspeed,fan-tach-ch = /bits/ 8 <0x02>; | |
| }; | |
| fan@3 { | |
| reg = <0x03>; | |
| aspeed,fan-tach-ch = /bits/ 8 <0x03>; | |
| }; | |
| fan@4 { | |
| reg = <0x04>; | |
| aspeed,fan-tach-ch = /bits/ 8 <0x04>; | |
| }; | |
| fan@5 { | |
| reg = <0x00>; | |
| aspeed,fan-tach-ch = /bits/ 8 <0x05>; | |
| }; | |
| fan@6 { | |
| reg = <0x01>; | |
| aspeed,fan-tach-ch = /bits/ 8 <0x06>; | |
| }; | |
| fan@7 { | |
| reg = <0x02>; | |
| aspeed,fan-tach-ch = /bits/ 8 <0x07>; | |
| }; | |
| fan@8 { | |
| reg = <0x03>; | |
| aspeed,fan-tach-ch = /bits/ 8 <0x08>; | |
| }; | |
| fan@9 { | |
| reg = <0x04>; | |
| aspeed,fan-tach-ch = /bits/ 8 <0x09>; | |
| }; | |
| }; | |
| &fmc { | |
| status = "okay"; | |
| flash@0 { | |
| status = "okay"; | |
| label = "bmc"; | |
| m25p,fast-read; | |
| spi-max-frequency = <50000000>; | |
| partitions { | |
| #address-cells = < 1 >; | |
| #size-cells = < 1 >; | |
| compatible = "fixed-partitions"; | |
| u-boot@0 { | |
| reg = < 0 0x60000 >; | |
| label = "u-boot"; | |
| }; | |
| u-boot-env@60000 { | |
| reg = < 0x60000 0x20000 >; | |
| label = "u-boot-env"; | |
| }; | |
| obmc-ubi@80000 { | |
| reg = < 0x80000 0x1F80000 >; | |
| label = "obmc-ubi"; | |
| }; | |
| }; | |
| }; | |
| flash@1 { | |
| status = "okay"; | |
| label = "alt-bmc"; | |
| m25p,fast-read; | |
| spi-max-frequency = <50000000>; | |
| partitions { | |
| #address-cells = < 1 >; | |
| #size-cells = < 1 >; | |
| compatible = "fixed-partitions"; | |
| u-boot@0 { | |
| reg = < 0 0x60000 >; | |
| label = "alt-u-boot"; | |
| }; | |
| u-boot-env@60000 { | |
| reg = < 0x60000 0x20000 >; | |
| label = "alt-u-boot-env"; | |
| }; | |
| obmc-ubi@80000 { | |
| reg = < 0x80000 0x1F80000 >; | |
| label = "alt-obmc-ubi"; | |
| }; | |
| }; | |
| }; | |
| }; | |
| &spi1 { | |
| status = "okay"; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <&pinctrl_spi1_default>; | |
| flash@0 { | |
| status = "okay"; | |
| label = "pnor"; | |
| m25p,fast-read; | |
| spi-max-frequency = <100000000>; | |
| }; | |
| }; | |
| &lpc_ctrl { | |
| status = "okay"; | |
| memory-region = <&flash_memory>; | |
| flash = <&spi1>; | |
| }; | |
| &uart1 { | |
| /* Rear RS-232 connector */ | |
| status = "okay"; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <&pinctrl_txd1_default | |
| &pinctrl_rxd1_default | |
| &pinctrl_nrts1_default | |
| &pinctrl_ndtr1_default | |
| &pinctrl_ndsr1_default | |
| &pinctrl_ncts1_default | |
| &pinctrl_ndcd1_default | |
| &pinctrl_nri1_default>; | |
| }; | |
| &uart2 { | |
| /* APSS */ | |
| status = "okay"; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>; | |
| }; | |
| &uart5 { | |
| status = "okay"; | |
| }; | |
| &mac0 { | |
| status = "okay"; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <&pinctrl_rmii1_default>; | |
| clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, | |
| <&syscon ASPEED_CLK_MAC1RCLK>; | |
| clock-names = "MACCLK", "RCLK"; | |
| use-ncsi; | |
| }; | |
| &mac1 { | |
| status = "okay"; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; | |
| }; | |
| &i2c0 { | |
| status = "okay"; | |
| tmp275@48 { | |
| compatible = "ti,tmp275"; | |
| reg = <0x48>; | |
| }; | |
| }; | |
| &i2c1 { | |
| status = "disabled"; | |
| }; | |
| &i2c2 { | |
| status = "okay"; | |
| /* CPU MFG CONN */ | |
| }; | |
| &i2c3 { | |
| status = "okay"; | |
| /* APSS */ | |
| /* CPLD */ | |
| /* PCA9516 (repeater) -> | |
| * CLK Buffer 9FGS9092 | |
| * Power Supply 0 | |
| * Power Supply 1 | |
| * PCA 9552 LED | |
| */ | |
| pca9552: pca9552@60 { | |
| compatible = "nxp,pca9552"; | |
| reg = <0x60>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| gpio-controller; | |
| #gpio-cells = <2>; | |
| gpio@0 { | |
| reg = <0>; | |
| type = <PCA955X_TYPE_GPIO>; | |
| }; | |
| gpio@1 { | |
| reg = <1>; | |
| type = <PCA955X_TYPE_GPIO>; | |
| }; | |
| gpio@2 { | |
| reg = <2>; | |
| type = <PCA955X_TYPE_GPIO>; | |
| }; | |
| gpio@3 { | |
| reg = <3>; | |
| type = <PCA955X_TYPE_GPIO>; | |
| }; | |
| gpio@4 { | |
| reg = <4>; | |
| type = <PCA955X_TYPE_GPIO>; | |
| }; | |
| gpio@5 { | |
| reg = <5>; | |
| type = <PCA955X_TYPE_GPIO>; | |
| }; | |
| gpio@6 { | |
| reg = <6>; | |
| type = <PCA955X_TYPE_GPIO>; | |
| }; | |
| gpio@7 { | |
| reg = <7>; | |
| type = <PCA955X_TYPE_GPIO>; | |
| }; | |
| gpio@8 { | |
| reg = <8>; | |
| type = <PCA955X_TYPE_GPIO>; | |
| }; | |
| gpio@9 { | |
| reg = <9>; | |
| type = <PCA955X_TYPE_GPIO>; | |
| }; | |
| gpio@10 { | |
| reg = <10>; | |
| type = <PCA955X_TYPE_GPIO>; | |
| }; | |
| gpio@11 { | |
| reg = <11>; | |
| type = <PCA955X_TYPE_GPIO>; | |
| }; | |
| gpio@12 { | |
| reg = <12>; | |
| type = <PCA955X_TYPE_GPIO>; | |
| }; | |
| gpio@13 { | |
| reg = <13>; | |
| type = <PCA955X_TYPE_GPIO>; | |
| }; | |
| gpio@14 { | |
| reg = <14>; | |
| type = <PCA955X_TYPE_GPIO>; | |
| }; | |
| gpio@15 { | |
| reg = <15>; | |
| type = <PCA955X_TYPE_GPIO>; | |
| }; | |
| }; | |
| power-supply@68 { | |
| compatible = "ibm,cffps1"; | |
| reg = <0x68>; | |
| }; | |
| power-supply@69 { | |
| compatible = "ibm,cffps1"; | |
| reg = <0x69>; | |
| }; | |
| }; | |
| &i2c4 { | |
| status = "okay"; | |
| /* CP0 VDD & VCS : IR35221 */ | |
| /* CP0 VDN & VIO : IR35221 */ | |
| /* CP0 VDDR : IR35221 */ | |
| ir35221@28 { | |
| compatible = "infineon,ir35221"; | |
| reg = <0x28>; | |
| }; | |
| ir35221@29 { | |
| compatible = "infineon,ir35221"; | |
| reg = <0x29>; | |
| }; | |
| ir35221@2d { | |
| compatible = "infineon,ir35221"; | |
| reg = <0x2d>; | |
| }; | |
| }; | |
| &i2c5 { | |
| status = "disabled"; | |
| }; | |
| &i2c6 { | |
| status = "disabled"; | |
| }; | |
| &i2c7 { | |
| status = "disabled"; | |
| }; | |
| &i2c8 { | |
| status = "okay"; | |
| eeprom@50 { | |
| compatible = "atmel,24c64"; | |
| reg = <0x50>; | |
| }; | |
| }; | |
| &i2c9 { | |
| status = "okay"; | |
| /* PCIe G3 x16 slot */ | |
| }; | |
| &i2c10 { | |
| status = "disabled"; | |
| }; | |
| &i2c11 { | |
| status = "okay"; | |
| /* CPLD */ | |
| /* TPM */ | |
| /* RTC RX8900CE */ | |
| /* TMP275A */ | |
| /* TMP275A */ | |
| rtc@32 { | |
| compatible = "epson,rx8900"; | |
| reg = <0x32>; | |
| }; | |
| tmp275@48 { | |
| compatible = "ti,tmp275"; | |
| reg = <0x48>; | |
| }; | |
| tmp275@49 { | |
| compatible = "ti,tmp275"; | |
| reg = <0x49>; | |
| }; | |
| }; | |
| &i2c12 { | |
| status = "disabled"; | |
| }; | |
| &i2c13 { | |
| status = "disabled"; | |
| }; | |
| &vuart { | |
| status = "okay"; | |
| }; | |
| &gfx { | |
| status = "okay"; | |
| memory-region = <&gfx_memory>; | |
| }; | |
| &adc { | |
| status = "okay"; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <&pinctrl_adc0_default | |
| &pinctrl_adc1_default | |
| &pinctrl_adc2_default | |
| &pinctrl_adc3_default | |
| &pinctrl_adc4_default | |
| &pinctrl_adc5_default | |
| &pinctrl_adc6_default | |
| &pinctrl_adc7_default | |
| &pinctrl_adc8_default | |
| &pinctrl_adc9_default | |
| &pinctrl_adc10_default | |
| &pinctrl_adc11_default | |
| &pinctrl_adc12_default | |
| &pinctrl_adc13_default | |
| &pinctrl_adc14_default | |
| &pinctrl_adc15_default>; | |
| }; | |
| &wdt1 { | |
| aspeed,reset-type = "none"; | |
| aspeed,external-signal; | |
| aspeed,ext-push-pull; | |
| aspeed,ext-active-high; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <&pinctrl_wdtrst1_default>; | |
| }; | |
| &wdt2 { | |
| aspeed,alt-boot; | |
| }; | |
| &ibt { | |
| status = "okay"; | |
| }; | |
| &vhub { | |
| status = "okay"; | |
| }; | |
| &video { | |
| status = "okay"; | |
| memory-region = <&video_engine_memory>; | |
| }; | |
| #include "ibm-power9-dual.dtsi" |