blob: 5ac4f8d76b91daee26a11fd7ad36a061a1869145 [file] [log] [blame]
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
* Copyright (C) 2017-2019 Broadcom. All Rights Reserved. The term *
* “Broadcom” refers to Broadcom Inc. and/or its subsidiaries. *
* Copyright (C) 2004-2016 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.broadcom.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
* *
* This program is free software; you can redistribute it and/or *
* modify it under the terms of version 2 of the GNU General *
* Public License as published by the Free Software Foundation. *
* This program is distributed in the hope that it will be useful. *
* ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
* WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
* FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
* DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
* TO BE LEGALLY INVALID. See the GNU General Public License for *
* more details, a copy of which can be found in the file COPYING *
* included with this package. *
*******************************************************************/
/* See Fibre Channel protocol T11 FC-LS for details */
#include <linux/blkdev.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_fc.h>
#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
#include "lpfc.h"
#include "lpfc_logmsg.h"
#include "lpfc_crtn.h"
#include "lpfc_vport.h"
#include "lpfc_debugfs.h"
static int lpfc_els_retry(struct lpfc_hba *, struct lpfc_iocbq *,
struct lpfc_iocbq *);
static void lpfc_cmpl_fabric_iocb(struct lpfc_hba *, struct lpfc_iocbq *,
struct lpfc_iocbq *);
static void lpfc_fabric_abort_vport(struct lpfc_vport *vport);
static int lpfc_issue_els_fdisc(struct lpfc_vport *vport,
struct lpfc_nodelist *ndlp, uint8_t retry);
static int lpfc_issue_fabric_iocb(struct lpfc_hba *phba,
struct lpfc_iocbq *iocb);
static int lpfc_max_els_tries = 3;
/**
* lpfc_els_chk_latt - Check host link attention event for a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine checks whether there is an outstanding host link
* attention event during the discovery process with the @vport. It is done
* by reading the HBA's Host Attention (HA) register. If there is any host
* link attention events during this @vport's discovery process, the @vport
* shall be marked as FC_ABORT_DISCOVERY, a host link attention clear shall
* be issued if the link state is not already in host link cleared state,
* and a return code shall indicate whether the host link attention event
* had happened.
*
* Note that, if either the host link is in state LPFC_LINK_DOWN or @vport
* state in LPFC_VPORT_READY, the request for checking host link attention
* event will be ignored and a return code shall indicate no host link
* attention event had happened.
*
* Return codes
* 0 - no host link attention event happened
* 1 - host link attention event happened
**/
int
lpfc_els_chk_latt(struct lpfc_vport *vport)
{
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
struct lpfc_hba *phba = vport->phba;
uint32_t ha_copy;
if (vport->port_state >= LPFC_VPORT_READY ||
phba->link_state == LPFC_LINK_DOWN ||
phba->sli_rev > LPFC_SLI_REV3)
return 0;
/* Read the HBA Host Attention Register */
if (lpfc_readl(phba->HAregaddr, &ha_copy))
return 1;
if (!(ha_copy & HA_LATT))
return 0;
/* Pending Link Event during Discovery */
lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
"0237 Pending Link Event during "
"Discovery: State x%x\n",
phba->pport->port_state);
/* CLEAR_LA should re-enable link attention events and
* we should then immediately take a LATT event. The
* LATT processing should call lpfc_linkdown() which
* will cleanup any left over in-progress discovery
* events.
*/
spin_lock_irq(shost->host_lock);
vport->fc_flag |= FC_ABORT_DISCOVERY;
spin_unlock_irq(shost->host_lock);
if (phba->link_state != LPFC_CLEAR_LA)
lpfc_issue_clear_la(phba, vport);
return 1;
}
/**
* lpfc_prep_els_iocb - Allocate and prepare a lpfc iocb data structure
* @vport: pointer to a host virtual N_Port data structure.
* @expectRsp: flag indicating whether response is expected.
* @cmdSize: size of the ELS command.
* @retry: number of retries to the command IOCB when it fails.
* @ndlp: pointer to a node-list data structure.
* @did: destination identifier.
* @elscmd: the ELS command code.
*
* This routine is used for allocating a lpfc-IOCB data structure from
* the driver lpfc-IOCB free-list and prepare the IOCB with the parameters
* passed into the routine for discovery state machine to issue an Extended
* Link Service (ELS) commands. It is a generic lpfc-IOCB allocation
* and preparation routine that is used by all the discovery state machine
* routines and the ELS command-specific fields will be later set up by
* the individual discovery machine routines after calling this routine
* allocating and preparing a generic IOCB data structure. It fills in the
* Buffer Descriptor Entries (BDEs), allocates buffers for both command
* payload and response payload (if expected). The reference count on the
* ndlp is incremented by 1 and the reference to the ndlp is put into
* context1 of the IOCB data structure for this IOCB to hold the ndlp
* reference for the command's callback function to access later.
*
* Return code
* Pointer to the newly allocated/prepared els iocb data structure
* NULL - when els iocb data structure allocation/preparation failed
**/
struct lpfc_iocbq *
lpfc_prep_els_iocb(struct lpfc_vport *vport, uint8_t expectRsp,
uint16_t cmdSize, uint8_t retry,
struct lpfc_nodelist *ndlp, uint32_t did,
uint32_t elscmd)
{
struct lpfc_hba *phba = vport->phba;
struct lpfc_iocbq *elsiocb;
struct lpfc_dmabuf *pcmd, *prsp, *pbuflist;
struct ulp_bde64 *bpl;
IOCB_t *icmd;
if (!lpfc_is_link_up(phba))
return NULL;
/* Allocate buffer for command iocb */
elsiocb = lpfc_sli_get_iocbq(phba);
if (elsiocb == NULL)
return NULL;
/*
* If this command is for fabric controller and HBA running
* in FIP mode send FLOGI, FDISC and LOGO as FIP frames.
*/
if ((did == Fabric_DID) &&
(phba->hba_flag & HBA_FIP_SUPPORT) &&
((elscmd == ELS_CMD_FLOGI) ||
(elscmd == ELS_CMD_FDISC) ||
(elscmd == ELS_CMD_LOGO)))
switch (elscmd) {
case ELS_CMD_FLOGI:
elsiocb->iocb_flag |=
((LPFC_ELS_ID_FLOGI << LPFC_FIP_ELS_ID_SHIFT)
& LPFC_FIP_ELS_ID_MASK);
break;
case ELS_CMD_FDISC:
elsiocb->iocb_flag |=
((LPFC_ELS_ID_FDISC << LPFC_FIP_ELS_ID_SHIFT)
& LPFC_FIP_ELS_ID_MASK);
break;
case ELS_CMD_LOGO:
elsiocb->iocb_flag |=
((LPFC_ELS_ID_LOGO << LPFC_FIP_ELS_ID_SHIFT)
& LPFC_FIP_ELS_ID_MASK);
break;
}
else
elsiocb->iocb_flag &= ~LPFC_FIP_ELS_ID_MASK;
icmd = &elsiocb->iocb;
/* fill in BDEs for command */
/* Allocate buffer for command payload */
pcmd = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
if (pcmd)
pcmd->virt = lpfc_mbuf_alloc(phba, MEM_PRI, &pcmd->phys);
if (!pcmd || !pcmd->virt)
goto els_iocb_free_pcmb_exit;
INIT_LIST_HEAD(&pcmd->list);
/* Allocate buffer for response payload */
if (expectRsp) {
prsp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
if (prsp)
prsp->virt = lpfc_mbuf_alloc(phba, MEM_PRI,
&prsp->phys);
if (!prsp || !prsp->virt)
goto els_iocb_free_prsp_exit;
INIT_LIST_HEAD(&prsp->list);
} else
prsp = NULL;
/* Allocate buffer for Buffer ptr list */
pbuflist = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
if (pbuflist)
pbuflist->virt = lpfc_mbuf_alloc(phba, MEM_PRI,
&pbuflist->phys);
if (!pbuflist || !pbuflist->virt)
goto els_iocb_free_pbuf_exit;
INIT_LIST_HEAD(&pbuflist->list);
if (expectRsp) {
icmd->un.elsreq64.bdl.addrHigh = putPaddrHigh(pbuflist->phys);
icmd->un.elsreq64.bdl.addrLow = putPaddrLow(pbuflist->phys);
icmd->un.elsreq64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
icmd->un.elsreq64.bdl.bdeSize = (2 * sizeof(struct ulp_bde64));
icmd->un.elsreq64.remoteID = did; /* DID */
icmd->ulpCommand = CMD_ELS_REQUEST64_CR;
if (elscmd == ELS_CMD_FLOGI)
icmd->ulpTimeout = FF_DEF_RATOV * 2;
else if (elscmd == ELS_CMD_LOGO)
icmd->ulpTimeout = phba->fc_ratov;
else
icmd->ulpTimeout = phba->fc_ratov * 2;
} else {
icmd->un.xseq64.bdl.addrHigh = putPaddrHigh(pbuflist->phys);
icmd->un.xseq64.bdl.addrLow = putPaddrLow(pbuflist->phys);
icmd->un.xseq64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
icmd->un.xseq64.bdl.bdeSize = sizeof(struct ulp_bde64);
icmd->un.xseq64.xmit_els_remoteID = did; /* DID */
icmd->ulpCommand = CMD_XMIT_ELS_RSP64_CX;
}
icmd->ulpBdeCount = 1;
icmd->ulpLe = 1;
icmd->ulpClass = CLASS3;
/*
* If we have NPIV enabled, we want to send ELS traffic by VPI.
* For SLI4, since the driver controls VPIs we also want to include
* all ELS pt2pt protocol traffic as well.
*/
if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) ||
((phba->sli_rev == LPFC_SLI_REV4) &&
(vport->fc_flag & FC_PT2PT))) {
if (expectRsp) {
icmd->un.elsreq64.myID = vport->fc_myDID;
/* For ELS_REQUEST64_CR, use the VPI by default */
icmd->ulpContext = phba->vpi_ids[vport->vpi];
}
icmd->ulpCt_h = 0;
/* The CT field must be 0=INVALID_RPI for the ECHO cmd */
if (elscmd == ELS_CMD_ECHO)
icmd->ulpCt_l = 0; /* context = invalid RPI */
else
icmd->ulpCt_l = 1; /* context = VPI */
}
bpl = (struct ulp_bde64 *) pbuflist->virt;
bpl->addrLow = le32_to_cpu(putPaddrLow(pcmd->phys));
bpl->addrHigh = le32_to_cpu(putPaddrHigh(pcmd->phys));
bpl->tus.f.bdeSize = cmdSize;
bpl->tus.f.bdeFlags = 0;
bpl->tus.w = le32_to_cpu(bpl->tus.w);
if (expectRsp) {
bpl++;
bpl->addrLow = le32_to_cpu(putPaddrLow(prsp->phys));
bpl->addrHigh = le32_to_cpu(putPaddrHigh(prsp->phys));
bpl->tus.f.bdeSize = FCELSSIZE;
bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
bpl->tus.w = le32_to_cpu(bpl->tus.w);
}
/* prevent preparing iocb with NULL ndlp reference */
elsiocb->context1 = lpfc_nlp_get(ndlp);
if (!elsiocb->context1)
goto els_iocb_free_pbuf_exit;
elsiocb->context2 = pcmd;
elsiocb->context3 = pbuflist;
elsiocb->retry = retry;
elsiocb->vport = vport;
elsiocb->drvrTimeout = (phba->fc_ratov << 1) + LPFC_DRVR_TIMEOUT;
if (prsp) {
list_add(&prsp->list, &pcmd->list);
}
if (expectRsp) {
/* Xmit ELS command <elsCmd> to remote NPORT <did> */
lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
"0116 Xmit ELS command x%x to remote "
"NPORT x%x I/O tag: x%x, port state:x%x "
"rpi x%x fc_flag:x%x\n",
elscmd, did, elsiocb->iotag,
vport->port_state, ndlp->nlp_rpi,
vport->fc_flag);
} else {
/* Xmit ELS response <elsCmd> to remote NPORT <did> */
lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
"0117 Xmit ELS response x%x to remote "
"NPORT x%x I/O tag: x%x, size: x%x "
"port_state x%x rpi x%x fc_flag x%x\n",
elscmd, ndlp->nlp_DID, elsiocb->iotag,
cmdSize, vport->port_state,
ndlp->nlp_rpi, vport->fc_flag);
}
return elsiocb;
els_iocb_free_pbuf_exit:
if (expectRsp)
lpfc_mbuf_free(phba, prsp->virt, prsp->phys);
kfree(pbuflist);
els_iocb_free_prsp_exit:
lpfc_mbuf_free(phba, pcmd->virt, pcmd->phys);
kfree(prsp);
els_iocb_free_pcmb_exit:
kfree(pcmd);
lpfc_sli_release_iocbq(phba, elsiocb);
return NULL;
}
/**
* lpfc_issue_fabric_reglogin - Issue fabric registration login for a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine issues a fabric registration login for a @vport. An
* active ndlp node with Fabric_DID must already exist for this @vport.
* The routine invokes two mailbox commands to carry out fabric registration
* login through the HBA firmware: the first mailbox command requests the
* HBA to perform link configuration for the @vport; and the second mailbox
* command requests the HBA to perform the actual fabric registration login
* with the @vport.
*
* Return code
* 0 - successfully issued fabric registration login for @vport
* -ENXIO -- failed to issue fabric registration login for @vport
**/
int
lpfc_issue_fabric_reglogin(struct lpfc_vport *vport)
{
struct lpfc_hba *phba = vport->phba;
LPFC_MBOXQ_t *mbox;
struct lpfc_dmabuf *mp;
struct lpfc_nodelist *ndlp;
struct serv_parm *sp;
int rc;
int err = 0;
sp = &phba->fc_fabparam;
ndlp = lpfc_findnode_did(vport, Fabric_DID);
if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) {
err = 1;
goto fail;
}
mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!mbox) {
err = 2;
goto fail;
}
vport->port_state = LPFC_FABRIC_CFG_LINK;
lpfc_config_link(phba, mbox);
mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
mbox->vport = vport;
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
if (rc == MBX_NOT_FINISHED) {
err = 3;
goto fail_free_mbox;
}
mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!mbox) {
err = 4;
goto fail;
}
rc = lpfc_reg_rpi(phba, vport->vpi, Fabric_DID, (uint8_t *)sp, mbox,
ndlp->nlp_rpi);
if (rc) {
err = 5;
goto fail_free_mbox;
}
mbox->mbox_cmpl = lpfc_mbx_cmpl_fabric_reg_login;
mbox->vport = vport;
/* increment the reference count on ndlp to hold reference
* for the callback routine.
*/
mbox->ctx_ndlp = lpfc_nlp_get(ndlp);
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
if (rc == MBX_NOT_FINISHED) {
err = 6;
goto fail_issue_reg_login;
}
return 0;
fail_issue_reg_login:
/* decrement the reference count on ndlp just incremented
* for the failed mbox command.
*/
lpfc_nlp_put(ndlp);
mp = (struct lpfc_dmabuf *)mbox->ctx_buf;
lpfc_mbuf_free(phba, mp->virt, mp->phys);
kfree(mp);
fail_free_mbox:
mempool_free(mbox, phba->mbox_mem_pool);
fail:
lpfc_vport_set_state(vport, FC_VPORT_FAILED);
lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
"0249 Cannot issue Register Fabric login: Err %d\n", err);
return -ENXIO;
}
/**
* lpfc_issue_reg_vfi - Register VFI for this vport's fabric login
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine issues a REG_VFI mailbox for the vfi, vpi, fcfi triplet for
* the @vport. This mailbox command is necessary for SLI4 port only.
*
* Return code
* 0 - successfully issued REG_VFI for @vport
* A failure code otherwise.
**/
int
lpfc_issue_reg_vfi(struct lpfc_vport *vport)
{
struct lpfc_hba *phba = vport->phba;
LPFC_MBOXQ_t *mboxq = NULL;
struct lpfc_nodelist *ndlp;
struct lpfc_dmabuf *dmabuf = NULL;
int rc = 0;
/* move forward in case of SLI4 FC port loopback test and pt2pt mode */
if ((phba->sli_rev == LPFC_SLI_REV4) &&
!(phba->link_flag & LS_LOOPBACK_MODE) &&
!(vport->fc_flag & FC_PT2PT)) {
ndlp = lpfc_findnode_did(vport, Fabric_DID);
if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) {
rc = -ENODEV;
goto fail;
}
}
mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!mboxq) {
rc = -ENOMEM;
goto fail;
}
/* Supply CSP's only if we are fabric connect or pt-to-pt connect */
if ((vport->fc_flag & FC_FABRIC) || (vport->fc_flag & FC_PT2PT)) {
dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
if (!dmabuf) {
rc = -ENOMEM;
goto fail;
}
dmabuf->virt = lpfc_mbuf_alloc(phba, MEM_PRI, &dmabuf->phys);
if (!dmabuf->virt) {
rc = -ENOMEM;
goto fail;
}
memcpy(dmabuf->virt, &phba->fc_fabparam,
sizeof(struct serv_parm));
}
vport->port_state = LPFC_FABRIC_CFG_LINK;
if (dmabuf)
lpfc_reg_vfi(mboxq, vport, dmabuf->phys);
else
lpfc_reg_vfi(mboxq, vport, 0);
mboxq->mbox_cmpl = lpfc_mbx_cmpl_reg_vfi;
mboxq->vport = vport;
mboxq->ctx_buf = dmabuf;
rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
if (rc == MBX_NOT_FINISHED) {
rc = -ENXIO;
goto fail;
}
return 0;
fail:
if (mboxq)
mempool_free(mboxq, phba->mbox_mem_pool);
if (dmabuf) {
if (dmabuf->virt)
lpfc_mbuf_free(phba, dmabuf->virt, dmabuf->phys);
kfree(dmabuf);
}
lpfc_vport_set_state(vport, FC_VPORT_FAILED);
lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
"0289 Issue Register VFI failed: Err %d\n", rc);
return rc;
}
/**
* lpfc_issue_unreg_vfi - Unregister VFI for this vport's fabric login
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine issues a UNREG_VFI mailbox with the vfi, vpi, fcfi triplet for
* the @vport. This mailbox command is necessary for SLI4 port only.
*
* Return code
* 0 - successfully issued REG_VFI for @vport
* A failure code otherwise.
**/
int
lpfc_issue_unreg_vfi(struct lpfc_vport *vport)
{
struct lpfc_hba *phba = vport->phba;
struct Scsi_Host *shost;
LPFC_MBOXQ_t *mboxq;
int rc;
mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!mboxq) {
lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
"2556 UNREG_VFI mbox allocation failed"
"HBA state x%x\n", phba->pport->port_state);
return -ENOMEM;
}
lpfc_unreg_vfi(mboxq, vport);
mboxq->vport = vport;
mboxq->mbox_cmpl = lpfc_unregister_vfi_cmpl;
rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
if (rc == MBX_NOT_FINISHED) {
lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
"2557 UNREG_VFI issue mbox failed rc x%x "
"HBA state x%x\n",
rc, phba->pport->port_state);
mempool_free(mboxq, phba->mbox_mem_pool);
return -EIO;
}
shost = lpfc_shost_from_vport(vport);
spin_lock_irq(shost->host_lock);
vport->fc_flag &= ~FC_VFI_REGISTERED;
spin_unlock_irq(shost->host_lock);
return 0;
}
/**
* lpfc_check_clean_addr_bit - Check whether assigned FCID is clean.
* @vport: pointer to a host virtual N_Port data structure.
* @sp: pointer to service parameter data structure.
*
* This routine is called from FLOGI/FDISC completion handler functions.
* lpfc_check_clean_addr_bit return 1 when FCID/Fabric portname/ Fabric
* node nodename is changed in the completion service parameter else return
* 0. This function also set flag in the vport data structure to delay
* NP_Port discovery after the FLOGI/FDISC completion if Clean address bit
* in FLOGI/FDISC response is cleared and FCID/Fabric portname/ Fabric
* node nodename is changed in the completion service parameter.
*
* Return code
* 0 - FCID and Fabric Nodename and Fabric portname is not changed.
* 1 - FCID or Fabric Nodename or Fabric portname is changed.
*
**/
static uint8_t
lpfc_check_clean_addr_bit(struct lpfc_vport *vport,
struct serv_parm *sp)
{
struct lpfc_hba *phba = vport->phba;
uint8_t fabric_param_changed = 0;
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
if ((vport->fc_prevDID != vport->fc_myDID) ||
memcmp(&vport->fabric_portname, &sp->portName,
sizeof(struct lpfc_name)) ||
memcmp(&vport->fabric_nodename, &sp->nodeName,
sizeof(struct lpfc_name)) ||
(vport->vport_flag & FAWWPN_PARAM_CHG)) {
fabric_param_changed = 1;
vport->vport_flag &= ~FAWWPN_PARAM_CHG;
}
/*
* Word 1 Bit 31 in common service parameter is overloaded.
* Word 1 Bit 31 in FLOGI request is multiple NPort request
* Word 1 Bit 31 in FLOGI response is clean address bit
*
* If fabric parameter is changed and clean address bit is
* cleared delay nport discovery if
* - vport->fc_prevDID != 0 (not initial discovery) OR
* - lpfc_delay_discovery module parameter is set.
*/
if (fabric_param_changed && !sp->cmn.clean_address_bit &&
(vport->fc_prevDID || phba->cfg_delay_discovery)) {
spin_lock_irq(shost->host_lock);
vport->fc_flag |= FC_DISC_DELAYED;
spin_unlock_irq(shost->host_lock);
}
return fabric_param_changed;
}
/**
* lpfc_cmpl_els_flogi_fabric - Completion function for flogi to a fabric port
* @vport: pointer to a host virtual N_Port data structure.
* @ndlp: pointer to a node-list data structure.
* @sp: pointer to service parameter data structure.
* @irsp: pointer to the IOCB within the lpfc response IOCB.
*
* This routine is invoked by the lpfc_cmpl_els_flogi() completion callback
* function to handle the completion of a Fabric Login (FLOGI) into a fabric
* port in a fabric topology. It properly sets up the parameters to the @ndlp
* from the IOCB response. It also check the newly assigned N_Port ID to the
* @vport against the previously assigned N_Port ID. If it is different from
* the previously assigned Destination ID (DID), the lpfc_unreg_rpi() routine
* is invoked on all the remaining nodes with the @vport to unregister the
* Remote Port Indicators (RPIs). Finally, the lpfc_issue_fabric_reglogin()
* is invoked to register login to the fabric.
*
* Return code
* 0 - Success (currently, always return 0)
**/
static int
lpfc_cmpl_els_flogi_fabric(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
struct serv_parm *sp, IOCB_t *irsp)
{
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
struct lpfc_hba *phba = vport->phba;
struct lpfc_nodelist *np;
struct lpfc_nodelist *next_np;
uint8_t fabric_param_changed;
spin_lock_irq(shost->host_lock);
vport->fc_flag |= FC_FABRIC;
spin_unlock_irq(shost->host_lock);
phba->fc_edtov = be32_to_cpu(sp->cmn.e_d_tov);
if (sp->cmn.edtovResolution) /* E_D_TOV ticks are in nanoseconds */
phba->fc_edtov = (phba->fc_edtov + 999999) / 1000000;
phba->fc_edtovResol = sp->cmn.edtovResolution;
phba->fc_ratov = (be32_to_cpu(sp->cmn.w2.r_a_tov) + 999) / 1000;
if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
spin_lock_irq(shost->host_lock);
vport->fc_flag |= FC_PUBLIC_LOOP;
spin_unlock_irq(shost->host_lock);
}
vport->fc_myDID = irsp->un.ulpWord[4] & Mask_DID;
memcpy(&ndlp->nlp_portname, &sp->portName, sizeof(struct lpfc_name));
memcpy(&ndlp->nlp_nodename, &sp->nodeName, sizeof(struct lpfc_name));
ndlp->nlp_class_sup = 0;
if (sp->cls1.classValid)
ndlp->nlp_class_sup |= FC_COS_CLASS1;
if (sp->cls2.classValid)
ndlp->nlp_class_sup |= FC_COS_CLASS2;
if (sp->cls3.classValid)
ndlp->nlp_class_sup |= FC_COS_CLASS3;
if (sp->cls4.classValid)
ndlp->nlp_class_sup |= FC_COS_CLASS4;
ndlp->nlp_maxframe = ((sp->cmn.bbRcvSizeMsb & 0x0F) << 8) |
sp->cmn.bbRcvSizeLsb;
fabric_param_changed = lpfc_check_clean_addr_bit(vport, sp);
if (fabric_param_changed) {
/* Reset FDMI attribute masks based on config parameter */
if (phba->cfg_enable_SmartSAN ||
(phba->cfg_fdmi_on == LPFC_FDMI_SUPPORT)) {
/* Setup appropriate attribute masks */
vport->fdmi_hba_mask = LPFC_FDMI2_HBA_ATTR;
if (phba->cfg_enable_SmartSAN)
vport->fdmi_port_mask = LPFC_FDMI2_SMART_ATTR;
else
vport->fdmi_port_mask = LPFC_FDMI2_PORT_ATTR;
} else {
vport->fdmi_hba_mask = 0;
vport->fdmi_port_mask = 0;
}
}
memcpy(&vport->fabric_portname, &sp->portName,
sizeof(struct lpfc_name));
memcpy(&vport->fabric_nodename, &sp->nodeName,
sizeof(struct lpfc_name));
memcpy(&phba->fc_fabparam, sp, sizeof(struct serv_parm));
if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) {
if (sp->cmn.response_multiple_NPort) {
lpfc_printf_vlog(vport, KERN_WARNING,
LOG_ELS | LOG_VPORT,
"1816 FLOGI NPIV supported, "
"response data 0x%x\n",
sp->cmn.response_multiple_NPort);
spin_lock_irq(&phba->hbalock);
phba->link_flag |= LS_NPIV_FAB_SUPPORTED;
spin_unlock_irq(&phba->hbalock);
} else {
/* Because we asked f/w for NPIV it still expects us
to call reg_vnpid atleast for the physcial host */
lpfc_printf_vlog(vport, KERN_WARNING,
LOG_ELS | LOG_VPORT,
"1817 Fabric does not support NPIV "
"- configuring single port mode.\n");
spin_lock_irq(&phba->hbalock);
phba->link_flag &= ~LS_NPIV_FAB_SUPPORTED;
spin_unlock_irq(&phba->hbalock);
}
}
/*
* For FC we need to do some special processing because of the SLI
* Port's default settings of the Common Service Parameters.
*/
if ((phba->sli_rev == LPFC_SLI_REV4) &&
(phba->sli4_hba.lnk_info.lnk_tp == LPFC_LNK_TYPE_FC)) {
/* If physical FC port changed, unreg VFI and ALL VPIs / RPIs */
if (fabric_param_changed)
lpfc_unregister_fcf_prep(phba);
/* This should just update the VFI CSPs*/
if (vport->fc_flag & FC_VFI_REGISTERED)
lpfc_issue_reg_vfi(vport);
}
if (fabric_param_changed &&
!(vport->fc_flag & FC_VPORT_NEEDS_REG_VPI)) {
/* If our NportID changed, we need to ensure all
* remaining NPORTs get unreg_login'ed.
*/
list_for_each_entry_safe(np, next_np,
&vport->fc_nodes, nlp_listp) {
if (!NLP_CHK_NODE_ACT(np))
continue;
if ((np->nlp_state != NLP_STE_NPR_NODE) ||
!(np->nlp_flag & NLP_NPR_ADISC))
continue;
spin_lock_irq(shost->host_lock);
np->nlp_flag &= ~NLP_NPR_ADISC;
spin_unlock_irq(shost->host_lock);
lpfc_unreg_rpi(vport, np);
}
lpfc_cleanup_pending_mbox(vport);
if (phba->sli_rev == LPFC_SLI_REV4) {
lpfc_sli4_unreg_all_rpis(vport);
lpfc_mbx_unreg_vpi(vport);
spin_lock_irq(shost->host_lock);
vport->fc_flag |= FC_VPORT_NEEDS_INIT_VPI;
spin_unlock_irq(shost->host_lock);
}
/*
* For SLI3 and SLI4, the VPI needs to be reregistered in
* response to this fabric parameter change event.
*/
spin_lock_irq(shost->host_lock);
vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
spin_unlock_irq(shost->host_lock);
} else if ((phba->sli_rev == LPFC_SLI_REV4) &&
!(vport->fc_flag & FC_VPORT_NEEDS_REG_VPI)) {
/*
* Driver needs to re-reg VPI in order for f/w
* to update the MAC address.
*/
lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
lpfc_register_new_vport(phba, vport, ndlp);
return 0;
}
if (phba->sli_rev < LPFC_SLI_REV4) {
lpfc_nlp_set_state(vport, ndlp, NLP_STE_REG_LOGIN_ISSUE);
if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED &&
vport->fc_flag & FC_VPORT_NEEDS_REG_VPI)
lpfc_register_new_vport(phba, vport, ndlp);
else
lpfc_issue_fabric_reglogin(vport);
} else {
ndlp->nlp_type |= NLP_FABRIC;
lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
if ((!(vport->fc_flag & FC_VPORT_NEEDS_REG_VPI)) &&
(vport->vpi_state & LPFC_VPI_REGISTERED)) {
lpfc_start_fdiscs(phba);
lpfc_do_scr_ns_plogi(phba, vport);
} else if (vport->fc_flag & FC_VFI_REGISTERED)
lpfc_issue_init_vpi(vport);
else {
lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
"3135 Need register VFI: (x%x/%x)\n",
vport->fc_prevDID, vport->fc_myDID);
lpfc_issue_reg_vfi(vport);
}
}
return 0;
}
/**
* lpfc_cmpl_els_flogi_nport - Completion function for flogi to an N_Port
* @vport: pointer to a host virtual N_Port data structure.
* @ndlp: pointer to a node-list data structure.
* @sp: pointer to service parameter data structure.
*
* This routine is invoked by the lpfc_cmpl_els_flogi() completion callback
* function to handle the completion of a Fabric Login (FLOGI) into an N_Port
* in a point-to-point topology. First, the @vport's N_Port Name is compared
* with the received N_Port Name: if the @vport's N_Port Name is greater than
* the received N_Port Name lexicographically, this node shall assign local
* N_Port ID (PT2PT_LocalID: 1) and remote N_Port ID (PT2PT_RemoteID: 2) and
* will send out Port Login (PLOGI) with the N_Port IDs assigned. Otherwise,
* this node shall just wait for the remote node to issue PLOGI and assign
* N_Port IDs.
*
* Return code
* 0 - Success
* -ENXIO - Fail
**/
static int
lpfc_cmpl_els_flogi_nport(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
struct serv_parm *sp)
{
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
struct lpfc_hba *phba = vport->phba;
LPFC_MBOXQ_t *mbox;
int rc;
spin_lock_irq(shost->host_lock);
vport->fc_flag &= ~(FC_FABRIC | FC_PUBLIC_LOOP);
vport->fc_flag |= FC_PT2PT;
spin_unlock_irq(shost->host_lock);
/* If we are pt2pt with another NPort, force NPIV off! */
phba->sli3_options &= ~LPFC_SLI3_NPIV_ENABLED;
/* If physical FC port changed, unreg VFI and ALL VPIs / RPIs */
if ((phba->sli_rev == LPFC_SLI_REV4) && phba->fc_topology_changed) {
lpfc_unregister_fcf_prep(phba);
spin_lock_irq(shost->host_lock);
vport->fc_flag &= ~FC_VFI_REGISTERED;
spin_unlock_irq(shost->host_lock);
phba->fc_topology_changed = 0;
}
rc = memcmp(&vport->fc_portname, &sp->portName,
sizeof(vport->fc_portname));
if (rc >= 0) {
/* This side will initiate the PLOGI */
spin_lock_irq(shost->host_lock);
vport->fc_flag |= FC_PT2PT_PLOGI;
spin_unlock_irq(shost->host_lock);
/*
* N_Port ID cannot be 0, set our Id to LocalID
* the other side will be RemoteID.
*/
/* not equal */
if (rc)
vport->fc_myDID = PT2PT_LocalID;
/* Decrement ndlp reference count indicating that ndlp can be
* safely released when other references to it are done.
*/
lpfc_nlp_put(ndlp);
ndlp = lpfc_findnode_did(vport, PT2PT_RemoteID);
if (!ndlp) {
/*
* Cannot find existing Fabric ndlp, so allocate a
* new one
*/
ndlp = lpfc_nlp_init(vport, PT2PT_RemoteID);
if (!ndlp)
goto fail;
} else if (!NLP_CHK_NODE_ACT(ndlp)) {
ndlp = lpfc_enable_node(vport, ndlp,
NLP_STE_UNUSED_NODE);
if(!ndlp)
goto fail;
}
memcpy(&ndlp->nlp_portname, &sp->portName,
sizeof(struct lpfc_name));
memcpy(&ndlp->nlp_nodename, &sp->nodeName,
sizeof(struct lpfc_name));
/* Set state will put ndlp onto node list if not already done */
lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE);
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag |= NLP_NPR_2B_DISC;
spin_unlock_irq(shost->host_lock);
mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!mbox)
goto fail;
lpfc_config_link(phba, mbox);
mbox->mbox_cmpl = lpfc_mbx_cmpl_local_config_link;
mbox->vport = vport;
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
if (rc == MBX_NOT_FINISHED) {
mempool_free(mbox, phba->mbox_mem_pool);
goto fail;
}
} else {
/* This side will wait for the PLOGI, decrement ndlp reference
* count indicating that ndlp can be released when other
* references to it are done.
*/
lpfc_nlp_put(ndlp);
/* Start discovery - this should just do CLEAR_LA */
lpfc_disc_start(vport);
}
return 0;
fail:
return -ENXIO;
}
/**
* lpfc_cmpl_els_flogi - Completion callback function for flogi
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
*
* This routine is the top-level completion callback function for issuing
* a Fabric Login (FLOGI) command. If the response IOCB reported error,
* the lpfc_els_retry() routine shall be invoked to retry the FLOGI. If
* retry has been made (either immediately or delayed with lpfc_els_retry()
* returning 1), the command IOCB will be released and function returned.
* If the retry attempt has been given up (possibly reach the maximum
* number of retries), one additional decrement of ndlp reference shall be
* invoked before going out after releasing the command IOCB. This will
* actually release the remote node (Note, lpfc_els_free_iocb() will also
* invoke one decrement of ndlp reference count). If no error reported in
* the IOCB status, the command Port ID field is used to determine whether
* this is a point-to-point topology or a fabric topology: if the Port ID
* field is assigned, it is a fabric topology; otherwise, it is a
* point-to-point topology. The routine lpfc_cmpl_els_flogi_fabric() or
* lpfc_cmpl_els_flogi_nport() shall be invoked accordingly to handle the
* specific topology completion conditions.
**/
static void
lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb)
{
struct lpfc_vport *vport = cmdiocb->vport;
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
IOCB_t *irsp = &rspiocb->iocb;
struct lpfc_nodelist *ndlp = cmdiocb->context1;
struct lpfc_dmabuf *pcmd = cmdiocb->context2, *prsp;
struct serv_parm *sp;
uint16_t fcf_index;
int rc;
/* Check to see if link went down during discovery */
if (lpfc_els_chk_latt(vport)) {
/* One additional decrement on node reference count to
* trigger the release of the node
*/
lpfc_nlp_put(ndlp);
goto out;
}
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD,
"FLOGI cmpl: status:x%x/x%x state:x%x",
irsp->ulpStatus, irsp->un.ulpWord[4],
vport->port_state);
if (irsp->ulpStatus) {
/*
* In case of FIP mode, perform roundrobin FCF failover
* due to new FCF discovery
*/
if ((phba->hba_flag & HBA_FIP_SUPPORT) &&
(phba->fcf.fcf_flag & FCF_DISCOVERY)) {
if (phba->link_state < LPFC_LINK_UP)
goto stop_rr_fcf_flogi;
if ((phba->fcoe_cvl_eventtag_attn ==
phba->fcoe_cvl_eventtag) &&
(irsp->ulpStatus == IOSTAT_LOCAL_REJECT) &&
((irsp->un.ulpWord[4] & IOERR_PARAM_MASK) ==
IOERR_SLI_ABORTED))
goto stop_rr_fcf_flogi;
else
phba->fcoe_cvl_eventtag_attn =
phba->fcoe_cvl_eventtag;
lpfc_printf_log(phba, KERN_WARNING, LOG_FIP | LOG_ELS,
"2611 FLOGI failed on FCF (x%x), "
"status:x%x/x%x, tmo:x%x, perform "
"roundrobin FCF failover\n",
phba->fcf.current_rec.fcf_indx,
irsp->ulpStatus, irsp->un.ulpWord[4],
irsp->ulpTimeout);
lpfc_sli4_set_fcf_flogi_fail(phba,
phba->fcf.current_rec.fcf_indx);
fcf_index = lpfc_sli4_fcf_rr_next_index_get(phba);
rc = lpfc_sli4_fcf_rr_next_proc(vport, fcf_index);
if (rc)
goto out;
}
stop_rr_fcf_flogi:
/* FLOGI failure */
if (!(irsp->ulpStatus == IOSTAT_LOCAL_REJECT &&
((irsp->un.ulpWord[4] & IOERR_PARAM_MASK) ==
IOERR_LOOP_OPEN_FAILURE)))
lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
"2858 FLOGI failure Status:x%x/x%x "
"TMO:x%x Data x%x x%x\n",
irsp->ulpStatus, irsp->un.ulpWord[4],
irsp->ulpTimeout, phba->hba_flag,
phba->fcf.fcf_flag);
/* Check for retry */
if (lpfc_els_retry(phba, cmdiocb, rspiocb))
goto out;
/* If this is not a loop open failure, bail out */
if (!(irsp->ulpStatus == IOSTAT_LOCAL_REJECT &&
((irsp->un.ulpWord[4] & IOERR_PARAM_MASK) ==
IOERR_LOOP_OPEN_FAILURE)))
goto flogifail;
lpfc_printf_vlog(vport, KERN_WARNING, LOG_ELS,
"0150 FLOGI failure Status:x%x/x%x xri x%x TMO:x%x\n",
irsp->ulpStatus, irsp->un.ulpWord[4],
cmdiocb->sli4_xritag, irsp->ulpTimeout);
/* FLOGI failed, so there is no fabric */
spin_lock_irq(shost->host_lock);
vport->fc_flag &= ~(FC_FABRIC | FC_PUBLIC_LOOP);
spin_unlock_irq(shost->host_lock);
/* If private loop, then allow max outstanding els to be
* LPFC_MAX_DISC_THREADS (32). Scanning in the case of no
* alpa map would take too long otherwise.
*/
if (phba->alpa_map[0] == 0)
vport->cfg_discovery_threads = LPFC_MAX_DISC_THREADS;
if ((phba->sli_rev == LPFC_SLI_REV4) &&
(!(vport->fc_flag & FC_VFI_REGISTERED) ||
(vport->fc_prevDID != vport->fc_myDID) ||
phba->fc_topology_changed)) {
if (vport->fc_flag & FC_VFI_REGISTERED) {
if (phba->fc_topology_changed) {
lpfc_unregister_fcf_prep(phba);
spin_lock_irq(shost->host_lock);
vport->fc_flag &= ~FC_VFI_REGISTERED;
spin_unlock_irq(shost->host_lock);
phba->fc_topology_changed = 0;
} else {
lpfc_sli4_unreg_all_rpis(vport);
}
}
/* Do not register VFI if the driver aborted FLOGI */
if (!lpfc_error_lost_link(irsp))
lpfc_issue_reg_vfi(vport);
lpfc_nlp_put(ndlp);
goto out;
}
goto flogifail;
}
spin_lock_irq(shost->host_lock);
vport->fc_flag &= ~FC_VPORT_CVL_RCVD;
vport->fc_flag &= ~FC_VPORT_LOGO_RCVD;
spin_unlock_irq(shost->host_lock);
/*
* The FLogI succeeded. Sync the data for the CPU before
* accessing it.
*/
prsp = list_get_first(&pcmd->list, struct lpfc_dmabuf, list);
if (!prsp)
goto out;
sp = prsp->virt + sizeof(uint32_t);
/* FLOGI completes successfully */
lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
"0101 FLOGI completes successfully, I/O tag:x%x, "
"xri x%x Data: x%x x%x x%x x%x x%x %x\n",
cmdiocb->iotag, cmdiocb->sli4_xritag,
irsp->un.ulpWord[4], sp->cmn.e_d_tov,
sp->cmn.w2.r_a_tov, sp->cmn.edtovResolution,
vport->port_state, vport->fc_flag);
if (vport->port_state == LPFC_FLOGI) {
/*
* If Common Service Parameters indicate Nport
* we are point to point, if Fport we are Fabric.
*/
if (sp->cmn.fPort)
rc = lpfc_cmpl_els_flogi_fabric(vport, ndlp, sp, irsp);
else if (!(phba->hba_flag & HBA_FCOE_MODE))
rc = lpfc_cmpl_els_flogi_nport(vport, ndlp, sp);
else {
lpfc_printf_vlog(vport, KERN_ERR,
LOG_FIP | LOG_ELS,
"2831 FLOGI response with cleared Fabric "
"bit fcf_index 0x%x "
"Switch Name %02x%02x%02x%02x%02x%02x%02x%02x "
"Fabric Name "
"%02x%02x%02x%02x%02x%02x%02x%02x\n",
phba->fcf.current_rec.fcf_indx,
phba->fcf.current_rec.switch_name[0],
phba->fcf.current_rec.switch_name[1],
phba->fcf.current_rec.switch_name[2],
phba->fcf.current_rec.switch_name[3],
phba->fcf.current_rec.switch_name[4],
phba->fcf.current_rec.switch_name[5],
phba->fcf.current_rec.switch_name[6],
phba->fcf.current_rec.switch_name[7],
phba->fcf.current_rec.fabric_name[0],
phba->fcf.current_rec.fabric_name[1],
phba->fcf.current_rec.fabric_name[2],
phba->fcf.current_rec.fabric_name[3],
phba->fcf.current_rec.fabric_name[4],
phba->fcf.current_rec.fabric_name[5],
phba->fcf.current_rec.fabric_name[6],
phba->fcf.current_rec.fabric_name[7]);
lpfc_nlp_put(ndlp);
spin_lock_irq(&phba->hbalock);
phba->fcf.fcf_flag &= ~FCF_DISCOVERY;
phba->hba_flag &= ~(FCF_RR_INPROG | HBA_DEVLOSS_TMO);
spin_unlock_irq(&phba->hbalock);
phba->fcf.fcf_redisc_attempted = 0; /* reset */
goto out;
}
if (!rc) {
/* Mark the FCF discovery process done */
if (phba->hba_flag & HBA_FIP_SUPPORT)
lpfc_printf_vlog(vport, KERN_INFO, LOG_FIP |
LOG_ELS,
"2769 FLOGI to FCF (x%x) "
"completed successfully\n",
phba->fcf.current_rec.fcf_indx);
spin_lock_irq(&phba->hbalock);
phba->fcf.fcf_flag &= ~FCF_DISCOVERY;
phba->hba_flag &= ~(FCF_RR_INPROG | HBA_DEVLOSS_TMO);
spin_unlock_irq(&phba->hbalock);
phba->fcf.fcf_redisc_attempted = 0; /* reset */
goto out;
}
}
flogifail:
spin_lock_irq(&phba->hbalock);
phba->fcf.fcf_flag &= ~FCF_DISCOVERY;
spin_unlock_irq(&phba->hbalock);
lpfc_nlp_put(ndlp);
if (!lpfc_error_lost_link(irsp)) {
/* FLOGI failed, so just use loop map to make discovery list */
lpfc_disc_list_loopmap(vport);
/* Start discovery */
lpfc_disc_start(vport);
} else if (((irsp->ulpStatus != IOSTAT_LOCAL_REJECT) ||
(((irsp->un.ulpWord[4] & IOERR_PARAM_MASK) !=
IOERR_SLI_ABORTED) &&
((irsp->un.ulpWord[4] & IOERR_PARAM_MASK) !=
IOERR_SLI_DOWN))) &&
(phba->link_state != LPFC_CLEAR_LA)) {
/* If FLOGI failed enable link interrupt. */
lpfc_issue_clear_la(phba, vport);
}
out:
lpfc_els_free_iocb(phba, cmdiocb);
}
/**
* lpfc_issue_els_flogi - Issue an flogi iocb command for a vport
* @vport: pointer to a host virtual N_Port data structure.
* @ndlp: pointer to a node-list data structure.
* @retry: number of retries to the command IOCB.
*
* This routine issues a Fabric Login (FLOGI) Request ELS command
* for a @vport. The initiator service parameters are put into the payload
* of the FLOGI Request IOCB and the top-level callback function pointer
* to lpfc_cmpl_els_flogi() routine is put to the IOCB completion callback
* function field. The lpfc_issue_fabric_iocb routine is invoked to send
* out FLOGI ELS command with one outstanding fabric IOCB at a time.
*
* Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp
* will be incremented by 1 for holding the ndlp and the reference to ndlp
* will be stored into the context1 field of the IOCB for the completion
* callback function to the FLOGI ELS command.
*
* Return code
* 0 - successfully issued flogi iocb for @vport
* 1 - failed to issue flogi iocb for @vport
**/
static int
lpfc_issue_els_flogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
uint8_t retry)
{
struct lpfc_hba *phba = vport->phba;
struct serv_parm *sp;
IOCB_t *icmd;
struct lpfc_iocbq *elsiocb;
struct lpfc_iocbq defer_flogi_acc;
uint8_t *pcmd;
uint16_t cmdsize;
uint32_t tmo, did;
int rc;
cmdsize = (sizeof(uint32_t) + sizeof(struct serv_parm));
elsiocb = lpfc_prep_els_iocb(vport, 1, cmdsize, retry, ndlp,
ndlp->nlp_DID, ELS_CMD_FLOGI);
if (!elsiocb)
return 1;
icmd = &elsiocb->iocb;
pcmd = (uint8_t *) (((struct lpfc_dmabuf *) elsiocb->context2)->virt);
/* For FLOGI request, remainder of payload is service parameters */
*((uint32_t *) (pcmd)) = ELS_CMD_FLOGI;
pcmd += sizeof(uint32_t);
memcpy(pcmd, &vport->fc_sparam, sizeof(struct serv_parm));
sp = (struct serv_parm *) pcmd;
/* Setup CSPs accordingly for Fabric */
sp->cmn.e_d_tov = 0;
sp->cmn.w2.r_a_tov = 0;
sp->cmn.virtual_fabric_support = 0;
sp->cls1.classValid = 0;
if (sp->cmn.fcphLow < FC_PH3)
sp->cmn.fcphLow = FC_PH3;
if (sp->cmn.fcphHigh < FC_PH3)
sp->cmn.fcphHigh = FC_PH3;
if (phba->sli_rev == LPFC_SLI_REV4) {
if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
LPFC_SLI_INTF_IF_TYPE_0) {
elsiocb->iocb.ulpCt_h = ((SLI4_CT_FCFI >> 1) & 1);
elsiocb->iocb.ulpCt_l = (SLI4_CT_FCFI & 1);
/* FLOGI needs to be 3 for WQE FCFI */
/* Set the fcfi to the fcfi we registered with */
elsiocb->iocb.ulpContext = phba->fcf.fcfi;
}
/* Can't do SLI4 class2 without support sequence coalescing */
sp->cls2.classValid = 0;
sp->cls2.seqDelivery = 0;
} else {
/* Historical, setting sequential-delivery bit for SLI3 */
sp->cls2.seqDelivery = (sp->cls2.classValid) ? 1 : 0;
sp->cls3.seqDelivery = (sp->cls3.classValid) ? 1 : 0;
if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) {
sp->cmn.request_multiple_Nport = 1;
/* For FLOGI, Let FLOGI rsp set the NPortID for VPI 0 */
icmd->ulpCt_h = 1;
icmd->ulpCt_l = 0;
} else
sp->cmn.request_multiple_Nport = 0;
}
if (phba->fc_topology != LPFC_TOPOLOGY_LOOP) {
icmd->un.elsreq64.myID = 0;
icmd->un.elsreq64.fl = 1;
}
tmo = phba->fc_ratov;
phba->fc_ratov = LPFC_DISC_FLOGI_TMO;
lpfc_set_disctmo(vport);
phba->fc_ratov = tmo;
phba->fc_stat.elsXmitFLOGI++;
elsiocb->iocb_cmpl = lpfc_cmpl_els_flogi;
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD,
"Issue FLOGI: opt:x%x",
phba->sli3_options, 0, 0);
rc = lpfc_issue_fabric_iocb(phba, elsiocb);
phba->hba_flag |= HBA_FLOGI_ISSUED;
/* Check for a deferred FLOGI ACC condition */
if (phba->defer_flogi_acc_flag) {
did = vport->fc_myDID;
vport->fc_myDID = Fabric_DID;
memset(&defer_flogi_acc, 0, sizeof(struct lpfc_iocbq));
defer_flogi_acc.iocb.ulpContext = phba->defer_flogi_acc_rx_id;
defer_flogi_acc.iocb.unsli3.rcvsli3.ox_id =
phba->defer_flogi_acc_ox_id;
lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
"3354 Xmit deferred FLOGI ACC: rx_id: x%x,"
" ox_id: x%x, hba_flag x%x\n",
phba->defer_flogi_acc_rx_id,
phba->defer_flogi_acc_ox_id, phba->hba_flag);
/* Send deferred FLOGI ACC */
lpfc_els_rsp_acc(vport, ELS_CMD_FLOGI, &defer_flogi_acc,
ndlp, NULL);
phba->defer_flogi_acc_flag = false;
vport->fc_myDID = did;
}
if (rc == IOCB_ERROR) {
lpfc_els_free_iocb(phba, elsiocb);
return 1;
}
return 0;
}
/**
* lpfc_els_abort_flogi - Abort all outstanding flogi iocbs
* @phba: pointer to lpfc hba data structure.
*
* This routine aborts all the outstanding Fabric Login (FLOGI) IOCBs
* with a @phba. This routine walks all the outstanding IOCBs on the txcmplq
* list and issues an abort IOCB commond on each outstanding IOCB that
* contains a active Fabric_DID ndlp. Note that this function is to issue
* the abort IOCB command on all the outstanding IOCBs, thus when this
* function returns, it does not guarantee all the IOCBs are actually aborted.
*
* Return code
* 0 - Successfully issued abort iocb on all outstanding flogis (Always 0)
**/
int
lpfc_els_abort_flogi(struct lpfc_hba *phba)
{
struct lpfc_sli_ring *pring;
struct lpfc_iocbq *iocb, *next_iocb;
struct lpfc_nodelist *ndlp;
IOCB_t *icmd;
/* Abort outstanding I/O on NPort <nlp_DID> */
lpfc_printf_log(phba, KERN_INFO, LOG_DISCOVERY,
"0201 Abort outstanding I/O on NPort x%x\n",
Fabric_DID);
pring = lpfc_phba_elsring(phba);
if (unlikely(!pring))
return -EIO;
/*
* Check the txcmplq for an iocb that matches the nport the driver is
* searching for.
*/
spin_lock_irq(&phba->hbalock);
list_for_each_entry_safe(iocb, next_iocb, &pring->txcmplq, list) {
icmd = &iocb->iocb;
if (icmd->ulpCommand == CMD_ELS_REQUEST64_CR) {
ndlp = (struct lpfc_nodelist *)(iocb->context1);
if (ndlp && NLP_CHK_NODE_ACT(ndlp) &&
(ndlp->nlp_DID == Fabric_DID))
lpfc_sli_issue_abort_iotag(phba, pring, iocb);
}
}
spin_unlock_irq(&phba->hbalock);
return 0;
}
/**
* lpfc_initial_flogi - Issue an initial fabric login for a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine issues an initial Fabric Login (FLOGI) for the @vport
* specified. It first searches the ndlp with the Fabric_DID (0xfffffe) from
* the @vport's ndlp list. If no such ndlp found, it will create an ndlp and
* put it into the @vport's ndlp list. If an inactive ndlp found on the list,
* it will just be enabled and made active. The lpfc_issue_els_flogi() routine
* is then invoked with the @vport and the ndlp to perform the FLOGI for the
* @vport.
*
* Return code
* 0 - failed to issue initial flogi for @vport
* 1 - successfully issued initial flogi for @vport
**/
int
lpfc_initial_flogi(struct lpfc_vport *vport)
{
struct lpfc_nodelist *ndlp;
vport->port_state = LPFC_FLOGI;
lpfc_set_disctmo(vport);
/* First look for the Fabric ndlp */
ndlp = lpfc_findnode_did(vport, Fabric_DID);
if (!ndlp) {
/* Cannot find existing Fabric ndlp, so allocate a new one */
ndlp = lpfc_nlp_init(vport, Fabric_DID);
if (!ndlp)
return 0;
/* Set the node type */
ndlp->nlp_type |= NLP_FABRIC;
/* Put ndlp onto node list */
lpfc_enqueue_node(vport, ndlp);
} else if (!NLP_CHK_NODE_ACT(ndlp)) {
/* re-setup ndlp without removing from node list */
ndlp = lpfc_enable_node(vport, ndlp, NLP_STE_UNUSED_NODE);
if (!ndlp)
return 0;
}
if (lpfc_issue_els_flogi(vport, ndlp, 0)) {
/* This decrement of reference count to node shall kick off
* the release of the node.
*/
lpfc_nlp_put(ndlp);
return 0;
}
return 1;
}
/**
* lpfc_initial_fdisc - Issue an initial fabric discovery for a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine issues an initial Fabric Discover (FDISC) for the @vport
* specified. It first searches the ndlp with the Fabric_DID (0xfffffe) from
* the @vport's ndlp list. If no such ndlp found, it will create an ndlp and
* put it into the @vport's ndlp list. If an inactive ndlp found on the list,
* it will just be enabled and made active. The lpfc_issue_els_fdisc() routine
* is then invoked with the @vport and the ndlp to perform the FDISC for the
* @vport.
*
* Return code
* 0 - failed to issue initial fdisc for @vport
* 1 - successfully issued initial fdisc for @vport
**/
int
lpfc_initial_fdisc(struct lpfc_vport *vport)
{
struct lpfc_nodelist *ndlp;
/* First look for the Fabric ndlp */
ndlp = lpfc_findnode_did(vport, Fabric_DID);
if (!ndlp) {
/* Cannot find existing Fabric ndlp, so allocate a new one */
ndlp = lpfc_nlp_init(vport, Fabric_DID);
if (!ndlp)
return 0;
/* Put ndlp onto node list */
lpfc_enqueue_node(vport, ndlp);
} else if (!NLP_CHK_NODE_ACT(ndlp)) {
/* re-setup ndlp without removing from node list */
ndlp = lpfc_enable_node(vport, ndlp, NLP_STE_UNUSED_NODE);
if (!ndlp)
return 0;
}
if (lpfc_issue_els_fdisc(vport, ndlp, 0)) {
/* decrement node reference count to trigger the release of
* the node.
*/
lpfc_nlp_put(ndlp);
return 0;
}
return 1;
}
/**
* lpfc_more_plogi - Check and issue remaining plogis for a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine checks whether there are more remaining Port Logins
* (PLOGI) to be issued for the @vport. If so, it will invoke the routine
* lpfc_els_disc_plogi() to go through the Node Port Recovery (NPR) nodes
* to issue ELS PLOGIs up to the configured discover threads with the
* @vport (@vport->cfg_discovery_threads). The function also decrement
* the @vport's num_disc_node by 1 if it is not already 0.
**/
void
lpfc_more_plogi(struct lpfc_vport *vport)
{
if (vport->num_disc_nodes)
vport->num_disc_nodes--;
/* Continue discovery with <num_disc_nodes> PLOGIs to go */
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"0232 Continue discovery with %d PLOGIs to go "
"Data: x%x x%x x%x\n",
vport->num_disc_nodes, vport->fc_plogi_cnt,
vport->fc_flag, vport->port_state);
/* Check to see if there are more PLOGIs to be sent */
if (vport->fc_flag & FC_NLP_MORE)
/* go thru NPR nodes and issue any remaining ELS PLOGIs */
lpfc_els_disc_plogi(vport);
return;
}
/**
* lpfc_plogi_confirm_nport - Confirm pologi wwpn matches stored ndlp
* @phba: pointer to lpfc hba data structure.
* @prsp: pointer to response IOCB payload.
* @ndlp: pointer to a node-list data structure.
*
* This routine checks and indicates whether the WWPN of an N_Port, retrieved
* from a PLOGI, matches the WWPN that is stored in the @ndlp for that N_POrt.
* The following cases are considered N_Port confirmed:
* 1) The N_Port is a Fabric ndlp; 2) The @ndlp is on vport list and matches
* the WWPN of the N_Port logged into; 3) The @ndlp is not on vport list but
* it does not have WWPN assigned either. If the WWPN is confirmed, the
* pointer to the @ndlp will be returned. If the WWPN is not confirmed:
* 1) if there is a node on vport list other than the @ndlp with the same
* WWPN of the N_Port PLOGI logged into, the lpfc_unreg_rpi() will be invoked
* on that node to release the RPI associated with the node; 2) if there is
* no node found on vport list with the same WWPN of the N_Port PLOGI logged
* into, a new node shall be allocated (or activated). In either case, the
* parameters of the @ndlp shall be copied to the new_ndlp, the @ndlp shall
* be released and the new_ndlp shall be put on to the vport node list and
* its pointer returned as the confirmed node.
*
* Note that before the @ndlp got "released", the keepDID from not-matching
* or inactive "new_ndlp" on the vport node list is assigned to the nlp_DID
* of the @ndlp. This is because the release of @ndlp is actually to put it
* into an inactive state on the vport node list and the vport node list
* management algorithm does not allow two node with a same DID.
*
* Return code
* pointer to the PLOGI N_Port @ndlp
**/
static struct lpfc_nodelist *
lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp,
struct lpfc_nodelist *ndlp)
{
struct lpfc_vport *vport = ndlp->vport;
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
struct lpfc_nodelist *new_ndlp;
struct lpfc_rport_data *rdata;
struct fc_rport *rport;
struct serv_parm *sp;
uint8_t name[sizeof(struct lpfc_name)];
uint32_t rc, keepDID = 0, keep_nlp_flag = 0;
uint32_t keep_new_nlp_flag = 0;
uint16_t keep_nlp_state;
u32 keep_nlp_fc4_type = 0;
struct lpfc_nvme_rport *keep_nrport = NULL;
int put_node;
int put_rport;
unsigned long *active_rrqs_xri_bitmap = NULL;
/* Fabric nodes can have the same WWPN so we don't bother searching
* by WWPN. Just return the ndlp that was given to us.
*/
if (ndlp->nlp_type & NLP_FABRIC)
return ndlp;
sp = (struct serv_parm *) ((uint8_t *) prsp + sizeof(uint32_t));
memset(name, 0, sizeof(struct lpfc_name));
/* Now we find out if the NPort we are logging into, matches the WWPN
* we have for that ndlp. If not, we have some work to do.
*/
new_ndlp = lpfc_findnode_wwpn(vport, &sp->portName);
/* return immediately if the WWPN matches ndlp */
if (new_ndlp == ndlp && NLP_CHK_NODE_ACT(new_ndlp))
return ndlp;
if (phba->sli_rev == LPFC_SLI_REV4) {
active_rrqs_xri_bitmap = mempool_alloc(phba->active_rrq_pool,
GFP_KERNEL);
if (active_rrqs_xri_bitmap)
memset(active_rrqs_xri_bitmap, 0,
phba->cfg_rrq_xri_bitmap_sz);
}
lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS | LOG_NODE,
"3178 PLOGI confirm: ndlp x%x x%x x%x: "
"new_ndlp x%x x%x x%x\n",
ndlp->nlp_DID, ndlp->nlp_flag, ndlp->nlp_fc4_type,
(new_ndlp ? new_ndlp->nlp_DID : 0),
(new_ndlp ? new_ndlp->nlp_flag : 0),
(new_ndlp ? new_ndlp->nlp_fc4_type : 0));
if (!new_ndlp) {
rc = memcmp(&ndlp->nlp_portname, name,
sizeof(struct lpfc_name));
if (!rc) {
if (active_rrqs_xri_bitmap)
mempool_free(active_rrqs_xri_bitmap,
phba->active_rrq_pool);
return ndlp;
}
new_ndlp = lpfc_nlp_init(vport, ndlp->nlp_DID);
if (!new_ndlp) {
if (active_rrqs_xri_bitmap)
mempool_free(active_rrqs_xri_bitmap,
phba->active_rrq_pool);
return ndlp;
}
} else if (!NLP_CHK_NODE_ACT(new_ndlp)) {
rc = memcmp(&ndlp->nlp_portname, name,
sizeof(struct lpfc_name));
if (!rc) {
if (active_rrqs_xri_bitmap)
mempool_free(active_rrqs_xri_bitmap,
phba->active_rrq_pool);
return ndlp;
}
new_ndlp = lpfc_enable_node(vport, new_ndlp,
NLP_STE_UNUSED_NODE);
if (!new_ndlp) {
if (active_rrqs_xri_bitmap)
mempool_free(active_rrqs_xri_bitmap,
phba->active_rrq_pool);
return ndlp;
}
keepDID = new_ndlp->nlp_DID;
if ((phba->sli_rev == LPFC_SLI_REV4) && active_rrqs_xri_bitmap)
memcpy(active_rrqs_xri_bitmap,
new_ndlp->active_rrqs_xri_bitmap,
phba->cfg_rrq_xri_bitmap_sz);
} else {
keepDID = new_ndlp->nlp_DID;
if (phba->sli_rev == LPFC_SLI_REV4 &&
active_rrqs_xri_bitmap)
memcpy(active_rrqs_xri_bitmap,
new_ndlp->active_rrqs_xri_bitmap,
phba->cfg_rrq_xri_bitmap_sz);
}
/* At this point in this routine, we know new_ndlp will be
* returned. however, any previous GID_FTs that were done
* would have updated nlp_fc4_type in ndlp, so we must ensure
* new_ndlp has the right value.
*/
if (vport->fc_flag & FC_FABRIC) {
keep_nlp_fc4_type = new_ndlp->nlp_fc4_type;
new_ndlp->nlp_fc4_type = ndlp->nlp_fc4_type;
}
lpfc_unreg_rpi(vport, new_ndlp);
new_ndlp->nlp_DID = ndlp->nlp_DID;
new_ndlp->nlp_prev_state = ndlp->nlp_prev_state;
if (phba->sli_rev == LPFC_SLI_REV4)
memcpy(new_ndlp->active_rrqs_xri_bitmap,
ndlp->active_rrqs_xri_bitmap,
phba->cfg_rrq_xri_bitmap_sz);
spin_lock_irq(shost->host_lock);
keep_new_nlp_flag = new_ndlp->nlp_flag;
keep_nlp_flag = ndlp->nlp_flag;
new_ndlp->nlp_flag = ndlp->nlp_flag;
/* if new_ndlp had NLP_UNREG_INP set, keep it */
if (keep_new_nlp_flag & NLP_UNREG_INP)
new_ndlp->nlp_flag |= NLP_UNREG_INP;
else
new_ndlp->nlp_flag &= ~NLP_UNREG_INP;
/* if new_ndlp had NLP_RPI_REGISTERED set, keep it */
if (keep_new_nlp_flag & NLP_RPI_REGISTERED)
new_ndlp->nlp_flag |= NLP_RPI_REGISTERED;
else
new_ndlp->nlp_flag &= ~NLP_RPI_REGISTERED;
ndlp->nlp_flag = keep_new_nlp_flag;
/* if ndlp had NLP_UNREG_INP set, keep it */
if (keep_nlp_flag & NLP_UNREG_INP)
ndlp->nlp_flag |= NLP_UNREG_INP;
else
ndlp->nlp_flag &= ~NLP_UNREG_INP;
/* if ndlp had NLP_RPI_REGISTERED set, keep it */
if (keep_nlp_flag & NLP_RPI_REGISTERED)
ndlp->nlp_flag |= NLP_RPI_REGISTERED;
else
ndlp->nlp_flag &= ~NLP_RPI_REGISTERED;
spin_unlock_irq(shost->host_lock);
/* Set nlp_states accordingly */
keep_nlp_state = new_ndlp->nlp_state;
lpfc_nlp_set_state(vport, new_ndlp, ndlp->nlp_state);
/* interchange the nvme remoteport structs */
keep_nrport = new_ndlp->nrport;
new_ndlp->nrport = ndlp->nrport;
/* Move this back to NPR state */
if (memcmp(&ndlp->nlp_portname, name, sizeof(struct lpfc_name)) == 0) {
/* The new_ndlp is replacing ndlp totally, so we need
* to put ndlp on UNUSED list and try to free it.
*/
lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
"3179 PLOGI confirm NEW: %x %x\n",
new_ndlp->nlp_DID, keepDID);
/* Fix up the rport accordingly */
rport = ndlp->rport;
if (rport) {
rdata = rport->dd_data;
if (rdata->pnode == ndlp) {
/* break the link before dropping the ref */
ndlp->rport = NULL;
lpfc_nlp_put(ndlp);
rdata->pnode = lpfc_nlp_get(new_ndlp);
new_ndlp->rport = rport;
}
new_ndlp->nlp_type = ndlp->nlp_type;
}
/* Fix up the nvme rport */
if (ndlp->nrport) {
ndlp->nrport = NULL;
lpfc_nlp_put(ndlp);
}
/* We shall actually free the ndlp with both nlp_DID and
* nlp_portname fields equals 0 to avoid any ndlp on the
* nodelist never to be used.
*/
if (ndlp->nlp_DID == 0) {
spin_lock_irq(&phba->ndlp_lock);
NLP_SET_FREE_REQ(ndlp);
spin_unlock_irq(&phba->ndlp_lock);
}
/* Two ndlps cannot have the same did on the nodelist.
* Note: for this case, ndlp has a NULL WWPN so setting
* the nlp_fc4_type isn't required.
*/
ndlp->nlp_DID = keepDID;
lpfc_nlp_set_state(vport, ndlp, keep_nlp_state);
if (phba->sli_rev == LPFC_SLI_REV4 &&
active_rrqs_xri_bitmap)
memcpy(ndlp->active_rrqs_xri_bitmap,
active_rrqs_xri_bitmap,
phba->cfg_rrq_xri_bitmap_sz);
if (!NLP_CHK_NODE_ACT(ndlp))
lpfc_drop_node(vport, ndlp);
}
else {
lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
"3180 PLOGI confirm SWAP: %x %x\n",
new_ndlp->nlp_DID, keepDID);
lpfc_unreg_rpi(vport, ndlp);
/* Two ndlps cannot have the same did and the fc4
* type must be transferred because the ndlp is in
* flight.
*/
ndlp->nlp_DID = keepDID;
ndlp->nlp_fc4_type = keep_nlp_fc4_type;
if (phba->sli_rev == LPFC_SLI_REV4 &&
active_rrqs_xri_bitmap)
memcpy(ndlp->active_rrqs_xri_bitmap,
active_rrqs_xri_bitmap,
phba->cfg_rrq_xri_bitmap_sz);
/* Since we are switching over to the new_ndlp,
* reset the old ndlp state
*/
if ((ndlp->nlp_state == NLP_STE_UNMAPPED_NODE) ||
(ndlp->nlp_state == NLP_STE_MAPPED_NODE))
keep_nlp_state = NLP_STE_NPR_NODE;
lpfc_nlp_set_state(vport, ndlp, keep_nlp_state);
/* Previous ndlp no longer active with nvme host transport.
* Remove reference from earlier registration unless the
* nvme host took care of it.
*/
if (ndlp->nrport)
lpfc_nlp_put(ndlp);
ndlp->nrport = keep_nrport;
/* Fix up the rport accordingly */
rport = ndlp->rport;
if (rport) {
rdata = rport->dd_data;
put_node = rdata->pnode != NULL;
put_rport = ndlp->rport != NULL;
rdata->pnode = NULL;
ndlp->rport = NULL;
if (put_node)
lpfc_nlp_put(ndlp);
if (put_rport)
put_device(&rport->dev);
}
}
if (phba->sli_rev == LPFC_SLI_REV4 &&
active_rrqs_xri_bitmap)
mempool_free(active_rrqs_xri_bitmap,
phba->active_rrq_pool);
lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS | LOG_NODE,
"3173 PLOGI confirm exit: new_ndlp x%x x%x x%x\n",
new_ndlp->nlp_DID, new_ndlp->nlp_flag,
new_ndlp->nlp_fc4_type);
return new_ndlp;
}
/**
* lpfc_end_rscn - Check and handle more rscn for a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine checks whether more Registration State Change
* Notifications (RSCNs) came in while the discovery state machine was in
* the FC_RSCN_MODE. If so, the lpfc_els_handle_rscn() routine will be
* invoked to handle the additional RSCNs for the @vport. Otherwise, the
* FC_RSCN_MODE bit will be cleared with the @vport to mark as the end of
* handling the RSCNs.
**/
void
lpfc_end_rscn(struct lpfc_vport *vport)
{
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
if (vport->fc_flag & FC_RSCN_MODE) {
/*
* Check to see if more RSCNs came in while we were
* processing this one.
*/
if (vport->fc_rscn_id_cnt ||
(vport->fc_flag & FC_RSCN_DISCOVERY) != 0)
lpfc_els_handle_rscn(vport);
else {
spin_lock_irq(shost->host_lock);
vport->fc_flag &= ~FC_RSCN_MODE;
spin_unlock_irq(shost->host_lock);
}
}
}
/**
* lpfc_cmpl_els_rrq - Completion handled for els RRQs.
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
*
* This routine will call the clear rrq function to free the rrq and
* clear the xri's bit in the ndlp's xri_bitmap. If the ndlp does not
* exist then the clear_rrq is still called because the rrq needs to
* be freed.
**/
static void
lpfc_cmpl_els_rrq(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb)
{
struct lpfc_vport *vport = cmdiocb->vport;
IOCB_t *irsp;
struct lpfc_nodelist *ndlp;
struct lpfc_node_rrq *rrq;
/* we pass cmdiocb to state machine which needs rspiocb as well */
rrq = cmdiocb->context_un.rrq;
cmdiocb->context_un.rsp_iocb = rspiocb;
irsp = &rspiocb->iocb;
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD,
"RRQ cmpl: status:x%x/x%x did:x%x",
irsp->ulpStatus, irsp->un.ulpWord[4],
irsp->un.elsreq64.remoteID);
ndlp = lpfc_findnode_did(vport, irsp->un.elsreq64.remoteID);
if (!ndlp || !NLP_CHK_NODE_ACT(ndlp) || ndlp != rrq->ndlp) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
"2882 RRQ completes to NPort x%x "
"with no ndlp. Data: x%x x%x x%x\n",
irsp->un.elsreq64.remoteID,
irsp->ulpStatus, irsp->un.ulpWord[4],
irsp->ulpIoTag);
goto out;
}
/* rrq completes to NPort <nlp_DID> */
lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
"2880 RRQ completes to NPort x%x "
"Data: x%x x%x x%x x%x x%x\n",
ndlp->nlp_DID, irsp->ulpStatus, irsp->un.ulpWord[4],
irsp->ulpTimeout, rrq->xritag, rrq->rxid);
if (irsp->ulpStatus) {
/* Check for retry */
/* RRQ failed Don't print the vport to vport rjts */
if (irsp->ulpStatus != IOSTAT_LS_RJT ||
(((irsp->un.ulpWord[4]) >> 16 != LSRJT_INVALID_CMD) &&
((irsp->un.ulpWord[4]) >> 16 != LSRJT_UNABLE_TPC)) ||
(phba)->pport->cfg_log_verbose & LOG_ELS)
lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
"2881 RRQ failure DID:%06X Status:x%x/x%x\n",
ndlp->nlp_DID, irsp->ulpStatus,
irsp->un.ulpWord[4]);
}
out:
if (rrq)
lpfc_clr_rrq_active(phba, rrq->xritag, rrq);
lpfc_els_free_iocb(phba, cmdiocb);
return;
}
/**
* lpfc_cmpl_els_plogi - Completion callback function for plogi
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
*
* This routine is the completion callback function for issuing the Port
* Login (PLOGI) command. For PLOGI completion, there must be an active
* ndlp on the vport node list that matches the remote node ID from the
* PLOGI response IOCB. If such ndlp does not exist, the PLOGI is simply
* ignored and command IOCB released. The PLOGI response IOCB status is
* checked for error conditons. If there is error status reported, PLOGI
* retry shall be attempted by invoking the lpfc_els_retry() routine.
* Otherwise, the lpfc_plogi_confirm_nport() routine shall be invoked on
* the ndlp and the NLP_EVT_CMPL_PLOGI state to the Discover State Machine
* (DSM) is set for this PLOGI completion. Finally, it checks whether
* there are additional N_Port nodes with the vport that need to perform
* PLOGI. If so, the lpfc_more_plogi() routine is invoked to issue addition
* PLOGIs.
**/
static void
lpfc_cmpl_els_plogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb)
{
struct lpfc_vport *vport = cmdiocb->vport;
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
IOCB_t *irsp;
struct lpfc_nodelist *ndlp;
struct lpfc_dmabuf *prsp;
int disc;
/* we pass cmdiocb to state machine which needs rspiocb as well */
cmdiocb->context_un.rsp_iocb = rspiocb;
irsp = &rspiocb->iocb;
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD,
"PLOGI cmpl: status:x%x/x%x did:x%x",
irsp->ulpStatus, irsp->un.ulpWord[4],
irsp->un.elsreq64.remoteID);
ndlp = lpfc_findnode_did(vport, irsp->un.elsreq64.remoteID);
if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
"0136 PLOGI completes to NPort x%x "
"with no ndlp. Data: x%x x%x x%x\n",
irsp->un.elsreq64.remoteID,
irsp->ulpStatus, irsp->un.ulpWord[4],
irsp->ulpIoTag);
goto out;
}
/* Since ndlp can be freed in the disc state machine, note if this node
* is being used during discovery.
*/
spin_lock_irq(shost->host_lock);
disc = (ndlp->nlp_flag & NLP_NPR_2B_DISC);
ndlp->nlp_flag &= ~NLP_NPR_2B_DISC;
spin_unlock_irq(shost->host_lock);
/* PLOGI completes to NPort <nlp_DID> */
lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
"0102 PLOGI completes to NPort x%06x "
"Data: x%x x%x x%x x%x x%x\n",
ndlp->nlp_DID, ndlp->nlp_fc4_type,
irsp->ulpStatus, irsp->un.ulpWord[4],
disc, vport->num_disc_nodes);
/* Check to see if link went down during discovery */
if (lpfc_els_chk_latt(vport)) {
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag |= NLP_NPR_2B_DISC;
spin_unlock_irq(shost->host_lock);
goto out;
}
if (irsp->ulpStatus) {
/* Check for retry */
if (lpfc_els_retry(phba, cmdiocb, rspiocb)) {
/* ELS command is being retried */
if (disc) {
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag |= NLP_NPR_2B_DISC;
spin_unlock_irq(shost->host_lock);
}
goto out;
}
/* PLOGI failed Don't print the vport to vport rjts */
if (irsp->ulpStatus != IOSTAT_LS_RJT ||
(((irsp->un.ulpWord[4]) >> 16 != LSRJT_INVALID_CMD) &&
((irsp->un.ulpWord[4]) >> 16 != LSRJT_UNABLE_TPC)) ||
(phba)->pport->cfg_log_verbose & LOG_ELS)
lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
"2753 PLOGI failure DID:%06X Status:x%x/x%x\n",
ndlp->nlp_DID, irsp->ulpStatus,
irsp->un.ulpWord[4]);
/* Do not call DSM for lpfc_els_abort'ed ELS cmds */
if (!lpfc_error_lost_link(irsp))
lpfc_disc_state_machine(vport, ndlp, cmdiocb,
NLP_EVT_CMPL_PLOGI);
} else {
/* Good status, call state machine */
prsp = list_entry(((struct lpfc_dmabuf *)
cmdiocb->context2)->list.next,
struct lpfc_dmabuf, list);
ndlp = lpfc_plogi_confirm_nport(phba, prsp->virt, ndlp);
lpfc_disc_state_machine(vport, ndlp, cmdiocb,
NLP_EVT_CMPL_PLOGI);
}
if (disc && vport->num_disc_nodes) {
/* Check to see if there are more PLOGIs to be sent */
lpfc_more_plogi(vport);
if (vport->num_disc_nodes == 0) {
spin_lock_irq(shost->host_lock);
vport->fc_flag &= ~FC_NDISC_ACTIVE;
spin_unlock_irq(shost->host_lock);
lpfc_can_disctmo(vport);
lpfc_end_rscn(vport);
}
}
out:
lpfc_els_free_iocb(phba, cmdiocb);
return;
}
/**
* lpfc_issue_els_plogi - Issue an plogi iocb command for a vport
* @vport: pointer to a host virtual N_Port data structure.
* @did: destination port identifier.
* @retry: number of retries to the command IOCB.
*
* This routine issues a Port Login (PLOGI) command to a remote N_Port
* (with the @did) for a @vport. Before issuing a PLOGI to a remote N_Port,
* the ndlp with the remote N_Port DID must exist on the @vport's ndlp list.
* This routine constructs the proper feilds of the PLOGI IOCB and invokes
* the lpfc_sli_issue_iocb() routine to send out PLOGI ELS command.
*
* Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp
* will be incremented by 1 for holding the ndlp and the reference to ndlp
* will be stored into the context1 field of the IOCB for the completion
* callback function to the PLOGI ELS command.
*
* Return code
* 0 - Successfully issued a plogi for @vport
* 1 - failed to issue a plogi for @vport
**/
int
lpfc_issue_els_plogi(struct lpfc_vport *vport, uint32_t did, uint8_t retry)
{
struct lpfc_hba *phba = vport->phba;
struct Scsi_Host *shost;
struct serv_parm *sp;
struct lpfc_nodelist *ndlp;
struct lpfc_iocbq *elsiocb;
uint8_t *pcmd;
uint16_t cmdsize;
int ret;
ndlp = lpfc_findnode_did(vport, did);
if (ndlp) {
/* Defer the processing of the issue PLOGI until after the
* outstanding UNREG_RPI mbox command completes, unless we
* are going offline. This logic does not apply for Fabric DIDs
*/
if ((ndlp->nlp_flag & NLP_UNREG_INP) &&
((ndlp->nlp_DID & Fabric_DID_MASK) != Fabric_DID_MASK) &&
!(vport->fc_flag & FC_OFFLINE_MODE)) {
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"4110 Issue PLOGI x%x deferred "
"on NPort x%x rpi x%x Data: %p\n",
ndlp->nlp_defer_did, ndlp->nlp_DID,
ndlp->nlp_rpi, ndlp);
/* We can only defer 1st PLOGI */
if (ndlp->nlp_defer_did == NLP_EVT_NOTHING_PENDING)
ndlp->nlp_defer_did = did;
return 0;
}
if (!NLP_CHK_NODE_ACT(ndlp))
ndlp = NULL;
}
/* If ndlp is not NULL, we will bump the reference count on it */
cmdsize = (sizeof(uint32_t) + sizeof(struct serv_parm));
elsiocb = lpfc_prep_els_iocb(vport, 1, cmdsize, retry, ndlp, did,
ELS_CMD_PLOGI);
if (!elsiocb)
return 1;
shost = lpfc_shost_from_vport(vport);
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag &= ~NLP_FCP_PRLI_RJT;
spin_unlock_irq(shost->host_lock);
pcmd = (uint8_t *) (((struct lpfc_dmabuf *) elsiocb->context2)->virt);
/* For PLOGI request, remainder of payload is service parameters */
*((uint32_t *) (pcmd)) = ELS_CMD_PLOGI;
pcmd += sizeof(uint32_t);
memcpy(pcmd, &vport->fc_sparam, sizeof(struct serv_parm));
sp = (struct serv_parm *) pcmd;
/*
* If we are a N-port connected to a Fabric, fix-up paramm's so logins
* to device on remote loops work.
*/
if ((vport->fc_flag & FC_FABRIC) && !(vport->fc_flag & FC_PUBLIC_LOOP))
sp->cmn.altBbCredit = 1;
if (sp->cmn.fcphLow < FC_PH_4_3)
sp->cmn.fcphLow = FC_PH_4_3;
if (sp->cmn.fcphHigh < FC_PH3)
sp->cmn.fcphHigh = FC_PH3;
sp->cmn.valid_vendor_ver_level = 0;
memset(sp->un.vendorVersion, 0, sizeof(sp->un.vendorVersion));
sp->cmn.bbRcvSizeMsb &= 0xF;
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD,
"Issue PLOGI: did:x%x",
did, 0, 0);
/* If our firmware supports this feature, convey that
* information to the target using the vendor specific field.
*/
if (phba->sli.sli_flag & LPFC_SLI_SUPPRESS_RSP) {
sp->cmn.valid_vendor_ver_level = 1;
sp->un.vv.vid = cpu_to_be32(LPFC_VV_EMLX_ID);
sp->un.vv.flags = cpu_to_be32(LPFC_VV_SUPPRESS_RSP);
}
phba->fc_stat.elsXmitPLOGI++;
elsiocb->iocb_cmpl = lpfc_cmpl_els_plogi;
ret = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
if (ret == IOCB_ERROR) {
lpfc_els_free_iocb(phba, elsiocb);
return 1;
}
return 0;
}
/**
* lpfc_cmpl_els_prli - Completion callback function for prli
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
*
* This routine is the completion callback function for a Process Login
* (PRLI) ELS command. The PRLI response IOCB status is checked for error
* status. If there is error status reported, PRLI retry shall be attempted
* by invoking the lpfc_els_retry() routine. Otherwise, the state
* NLP_EVT_CMPL_PRLI is sent to the Discover State Machine (DSM) for this
* ndlp to mark the PRLI completion.
**/
static void
lpfc_cmpl_els_prli(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb)
{
struct lpfc_vport *vport = cmdiocb->vport;
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
IOCB_t *irsp;
struct lpfc_nodelist *ndlp;
/* we pass cmdiocb to state machine which needs rspiocb as well */
cmdiocb->context_un.rsp_iocb = rspiocb;
irsp = &(rspiocb->iocb);
ndlp = (struct lpfc_nodelist *) cmdiocb->context1;
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag &= ~NLP_PRLI_SND;
/* Driver supports multiple FC4 types. Counters matter. */
vport->fc_prli_sent--;
ndlp->fc4_prli_sent--;
spin_unlock_irq(shost->host_lock);
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD,
"PRLI cmpl: status:x%x/x%x did:x%x",
irsp->ulpStatus, irsp->un.ulpWord[4],
ndlp->nlp_DID);
/* PRLI completes to NPort <nlp_DID> */
lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
"0103 PRLI completes to NPort x%06x "
"Data: x%x x%x x%x x%x\n",
ndlp->nlp_DID, irsp->ulpStatus, irsp->un.ulpWord[4],
vport->num_disc_nodes, ndlp->fc4_prli_sent);
/* Check to see if link went down during discovery */
if (lpfc_els_chk_latt(vport))
goto out;
if (irsp->ulpStatus) {
/* Check for retry */
if (lpfc_els_retry(phba, cmdiocb, rspiocb)) {
/* ELS command is being retried */
goto out;
}
/* PRLI failed */
lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
"2754 PRLI failure DID:%06X Status:x%x/x%x, "
"data: x%x\n",
ndlp->nlp_DID, irsp->ulpStatus,
irsp->un.ulpWord[4], ndlp->fc4_prli_sent);
/* Do not call DSM for lpfc_els_abort'ed ELS cmds */
if (lpfc_error_lost_link(irsp))
goto out;
else
lpfc_disc_state_machine(vport, ndlp, cmdiocb,
NLP_EVT_CMPL_PRLI);
} else {
/* Good status, call state machine. However, if another
* PRLI is outstanding, don't call the state machine
* because final disposition to Mapped or Unmapped is
* completed there.
*/
lpfc_disc_state_machine(vport, ndlp, cmdiocb,
NLP_EVT_CMPL_PRLI);
}
out:
lpfc_els_free_iocb(phba, cmdiocb);
return;
}
/**
* lpfc_issue_els_prli - Issue a prli iocb command for a vport
* @vport: pointer to a host virtual N_Port data structure.
* @ndlp: pointer to a node-list data structure.
* @retry: number of retries to the command IOCB.
*
* This routine issues a Process Login (PRLI) ELS command for the
* @vport. The PRLI service parameters are set up in the payload of the
* PRLI Request command and the pointer to lpfc_cmpl_els_prli() routine
* is put to the IOCB completion callback func field before invoking the
* routine lpfc_sli_issue_iocb() to send out PRLI command.
*
* Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp
* will be incremented by 1 for holding the ndlp and the reference to ndlp
* will be stored into the context1 field of the IOCB for the completion
* callback function to the PRLI ELS command.
*
* Return code
* 0 - successfully issued prli iocb command for @vport
* 1 - failed to issue prli iocb command for @vport
**/
int
lpfc_issue_els_prli(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
uint8_t retry)
{
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
struct lpfc_hba *phba = vport->phba;
PRLI *npr;
struct lpfc_nvme_prli *npr_nvme;
struct lpfc_iocbq *elsiocb;
uint8_t *pcmd;
uint16_t cmdsize;
u32 local_nlp_type, elscmd;
/*
* If we are in RSCN mode, the FC4 types supported from a
* previous GFT_ID command may not be accurate. So, if we
* are a NVME Initiator, always look for the possibility of
* the remote NPort beng a NVME Target.
*/
if (phba->sli_rev == LPFC_SLI_REV4 &&
vport->fc_flag & FC_RSCN_MODE &&
vport->nvmei_support)
ndlp->nlp_fc4_type |= NLP_FC4_NVME;
local_nlp_type = ndlp->nlp_fc4_type;
/* This routine will issue 1 or 2 PRLIs, so zero all the ndlp
* fields here before any of them can complete.
*/
ndlp->nlp_type &= ~(NLP_FCP_TARGET | NLP_FCP_INITIATOR);
ndlp->nlp_type &= ~(NLP_NVME_TARGET | NLP_NVME_INITIATOR);
ndlp->nlp_fcp_info &= ~NLP_FCP_2_DEVICE;
ndlp->nlp_flag &= ~(NLP_FIRSTBURST | NLP_NPR_2B_DISC);
ndlp->nvme_fb_size = 0;
send_next_prli:
if (local_nlp_type & NLP_FC4_FCP) {
/* Payload is 4 + 16 = 20 x14 bytes. */
cmdsize = (sizeof(uint32_t) + sizeof(PRLI));
elscmd = ELS_CMD_PRLI;
} else if (local_nlp_type & NLP_FC4_NVME) {
/* Payload is 4 + 20 = 24 x18 bytes. */
cmdsize = (sizeof(uint32_t) + sizeof(struct lpfc_nvme_prli));
elscmd = ELS_CMD_NVMEPRLI;
} else {
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"3083 Unknown FC_TYPE x%x ndlp x%06x\n",
ndlp->nlp_fc4_type, ndlp->nlp_DID);
return 1;
}
/* SLI3 ports don't support NVME. If this rport is a strict NVME
* FC4 type, implicitly LOGO.
*/
if (phba->sli_rev == LPFC_SLI_REV3 &&
ndlp->nlp_fc4_type == NLP_FC4_NVME) {
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"3088 Rport fc4 type 0x%x not supported by SLI3 adapter\n",
ndlp->nlp_type);
lpfc_disc_state_machine(vport, ndlp, NULL, NLP_EVT_DEVICE_RM);
return 1;
}
elsiocb = lpfc_prep_els_iocb(vport, 1, cmdsize, retry, ndlp,
ndlp->nlp_DID, elscmd);
if (!elsiocb)
return 1;
pcmd = (uint8_t *) (((struct lpfc_dmabuf *) elsiocb->context2)->virt);
/* For PRLI request, remainder of payload is service parameters */
memset(pcmd, 0, cmdsize);
if (local_nlp_type & NLP_FC4_FCP) {
/* Remainder of payload is FCP PRLI parameter page.
* Note: this data structure is defined as
* BE/LE in the structure definition so no
* byte swap call is made.
*/
*((uint32_t *)(pcmd)) = ELS_CMD_PRLI;
pcmd += sizeof(uint32_t);
npr = (PRLI *)pcmd;
/*
* If our firmware version is 3.20 or later,
* set the following bits for FC-TAPE support.
*/
if (phba->vpd.rev.feaLevelHigh >= 0x02) {
npr->ConfmComplAllowed = 1;
npr->Retry = 1;
npr->TaskRetryIdReq = 1;
}
npr->estabImagePair = 1;
npr->readXferRdyDis = 1;
if (vport->cfg_first_burst_size)
npr->writeXferRdyDis = 1;
/* For FCP support */
npr->prliType = PRLI_FCP_TYPE;
npr->initiatorFunc = 1;
elsiocb->iocb_flag |= LPFC_PRLI_FCP_REQ;
/* Remove FCP type - processed. */
local_nlp_type &= ~NLP_FC4_FCP;
} else if (local_nlp_type & NLP_FC4_NVME) {
/* Remainder of payload is NVME PRLI parameter page.
* This data structure is the newer definition that
* uses bf macros so a byte swap is required.
*/
*((uint32_t *)(pcmd)) = ELS_CMD_NVMEPRLI;
pcmd += sizeof(uint32_t);
npr_nvme = (struct lpfc_nvme_prli *)pcmd;
bf_set(prli_type_code, npr_nvme, PRLI_NVME_TYPE);
bf_set(prli_estabImagePair, npr_nvme, 0); /* Should be 0 */
/* Only initiators request first burst. */
if ((phba->cfg_nvme_enable_fb) &&
!phba->nvmet_support)
bf_set(prli_fba, npr_nvme, 1);
if (phba->nvmet_support) {
bf_set(prli_tgt, npr_nvme, 1);
bf_set(prli_disc, npr_nvme, 1);
} else {
bf_set(prli_init, npr_nvme, 1);
bf_set(prli_conf, npr_nvme, 1);
}
npr_nvme->word1 = cpu_to_be32(npr_nvme->word1);
npr_nvme->word4 = cpu_to_be32(npr_nvme->word4);
elsiocb->iocb_flag |= LPFC_PRLI_NVME_REQ;
/* Remove NVME type - processed. */
local_nlp_type &= ~NLP_FC4_NVME;
}
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD,
"Issue PRLI: did:x%x",
ndlp->nlp_DID, 0, 0);
phba->fc_stat.elsXmitPRLI++;
elsiocb->iocb_cmpl = lpfc_cmpl_els_prli;
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag |= NLP_PRLI_SND;
/* The vport counters are used for lpfc_scan_finished, but
* the ndlp is used to track outstanding PRLIs for different
* FC4 types.
*/
vport->fc_prli_sent++;
ndlp->fc4_prli_sent++;
spin_unlock_irq(shost->host_lock);
if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
IOCB_ERROR) {
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag &= ~NLP_PRLI_SND;
spin_unlock_irq(shost->host_lock);
lpfc_els_free_iocb(phba, elsiocb);
return 1;
}
/* The driver supports 2 FC4 types. Make sure
* a PRLI is issued for all types before exiting.
*/
if (phba->sli_rev == LPFC_SLI_REV4 &&
local_nlp_type & (NLP_FC4_FCP | NLP_FC4_NVME))
goto send_next_prli;
return 0;
}
/**
* lpfc_rscn_disc - Perform rscn discovery for a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine performs Registration State Change Notification (RSCN)
* discovery for a @vport. If the @vport's node port recovery count is not
* zero, it will invoke the lpfc_els_disc_plogi() to perform PLOGI for all
* the nodes that need recovery. If none of the PLOGI were needed through
* the lpfc_els_disc_plogi() routine, the lpfc_end_rscn() routine shall be
* invoked to check and handle possible more RSCN came in during the period
* of processing the current ones.
**/
static void
lpfc_rscn_disc(struct lpfc_vport *vport)
{
lpfc_can_disctmo(vport);
/* RSCN discovery */
/* go thru NPR nodes and issue ELS PLOGIs */
if (vport->fc_npr_cnt)
if (lpfc_els_disc_plogi(vport))
return;
lpfc_end_rscn(vport);
}
/**
* lpfc_adisc_done - Complete the adisc phase of discovery
* @vport: pointer to lpfc_vport hba data structure that finished all ADISCs.
*
* This function is called when the final ADISC is completed during discovery.
* This function handles clearing link attention or issuing reg_vpi depending
* on whether npiv is enabled. This function also kicks off the PLOGI phase of
* discovery.
* This function is called with no locks held.
**/
static void
lpfc_adisc_done(struct lpfc_vport *vport)
{
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
struct lpfc_hba *phba = vport->phba;
/*
* For NPIV, cmpl_reg_vpi will set port_state to READY,
* and continue discovery.
*/
if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) &&
!(vport->fc_flag & FC_RSCN_MODE) &&
(phba->sli_rev < LPFC_SLI_REV4)) {
/* The ADISCs are complete. Doesn't matter if they
* succeeded or failed because the ADISC completion
* routine guarantees to call the state machine and
* the RPI is either unregistered (failed ADISC response)
* or the RPI is still valid and the node is marked
* mapped for a target. The exchanges should be in the
* correct state. This code is specific to SLI3.
*/
lpfc_issue_clear_la(phba, vport);
lpfc_issue_reg_vpi(phba, vport);
return;
}
/*
* For SLI2, we need to set port_state to READY
* and continue discovery.
*/
if (vport->port_state < LPFC_VPORT_READY) {
/* If we get here, there is nothing to ADISC */
lpfc_issue_clear_la(phba, vport);
if (!(vport->fc_flag & FC_ABORT_DISCOVERY)) {
vport->num_disc_nodes = 0;
/* go thru NPR list, issue ELS PLOGIs */
if (vport->fc_npr_cnt)
lpfc_els_disc_plogi(vport);
if (!vport->num_disc_nodes) {
spin_lock_irq(shost->host_lock);
vport->fc_flag &= ~FC_NDISC_ACTIVE;
spin_unlock_irq(shost->host_lock);
lpfc_can_disctmo(vport);
lpfc_end_rscn(vport);
}
}
vport->port_state = LPFC_VPORT_READY;
} else
lpfc_rscn_disc(vport);
}
/**
* lpfc_more_adisc - Issue more adisc as needed
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine determines whether there are more ndlps on a @vport
* node list need to have Address Discover (ADISC) issued. If so, it will
* invoke the lpfc_els_disc_adisc() routine to issue ADISC on the @vport's
* remaining nodes which need to have ADISC sent.
**/
void
lpfc_more_adisc(struct lpfc_vport *vport)
{
if (vport->num_disc_nodes)
vport->num_disc_nodes--;
/* Continue discovery with <num_disc_nodes> ADISCs to go */
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"0210 Continue discovery with %d ADISCs to go "
"Data: x%x x%x x%x\n",
vport->num_disc_nodes, vport->fc_adisc_cnt,
vport->fc_flag, vport->port_state);
/* Check to see if there are more ADISCs to be sent */
if (vport->fc_flag & FC_NLP_MORE) {
lpfc_set_disctmo(vport);
/* go thru NPR nodes and issue any remaining ELS ADISCs */
lpfc_els_disc_adisc(vport);
}
if (!vport->num_disc_nodes)
lpfc_adisc_done(vport);
return;
}
/**
* lpfc_cmpl_els_adisc - Completion callback function for adisc
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
*
* This routine is the completion function for issuing the Address Discover
* (ADISC) command. It first checks to see whether link went down during
* the discovery process. If so, the node will be marked as node port
* recovery for issuing discover IOCB by the link attention handler and
* exit. Otherwise, the response status is checked. If error was reported
* in the response status, the ADISC command shall be retried by invoking
* the lpfc_els_retry() routine. Otherwise, if no error was reported in
* the response status, the state machine is invoked to set transition
* with respect to NLP_EVT_CMPL_ADISC event.
**/
static void
lpfc_cmpl_els_adisc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb)
{
struct lpfc_vport *vport = cmdiocb->vport;
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
IOCB_t *irsp;
struct lpfc_nodelist *ndlp;
int disc;
/* we pass cmdiocb to state machine which needs rspiocb as well */
cmdiocb->context_un.rsp_iocb = rspiocb;
irsp = &(rspiocb->iocb);
ndlp = (struct lpfc_nodelist *) cmdiocb->context1;
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD,
"ADISC cmpl: status:x%x/x%x did:x%x",
irsp->ulpStatus, irsp->un.ulpWord[4],
ndlp->nlp_DID);
/* Since ndlp can be freed in the disc state machine, note if this node
* is being used during discovery.
*/
spin_lock_irq(shost->host_lock);
disc = (ndlp->nlp_flag & NLP_NPR_2B_DISC);
ndlp->nlp_flag &= ~(NLP_ADISC_SND | NLP_NPR_2B_DISC);
spin_unlock_irq(shost->host_lock);
/* ADISC completes to NPort <nlp_DID> */
lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
"0104 ADISC completes to NPort x%x "
"Data: x%x x%x x%x x%x x%x\n",
ndlp->nlp_DID, irsp->ulpStatus, irsp->un.ulpWord[4],
irsp->ulpTimeout, disc, vport->num_disc_nodes);
/* Check to see if link went down during discovery */
if (lpfc_els_chk_latt(vport)) {
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag |= NLP_NPR_2B_DISC;
spin_unlock_irq(shost->host_lock);
goto out;
}
if (irsp->ulpStatus) {
/* Check for retry */
if (lpfc_els_retry(phba, cmdiocb, rspiocb)) {
/* ELS command is being retried */
if (disc) {
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag |= NLP_NPR_2B_DISC;
spin_unlock_irq(shost->host_lock);
lpfc_set_disctmo(vport);
}
goto out;
}
/* ADISC failed */
lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
"2755 ADISC failure DID:%06X Status:x%x/x%x\n",
ndlp->nlp_DID, irsp->ulpStatus,
irsp->un.ulpWord[4]);
/* Do not call DSM for lpfc_els_abort'ed ELS cmds */
if (!lpfc_error_lost_link(irsp))
lpfc_disc_state_machine(vport, ndlp, cmdiocb,
NLP_EVT_CMPL_ADISC);
} else
/* Good status, call state machine */
lpfc_disc_state_machine(vport, ndlp, cmdiocb,
NLP_EVT_CMPL_ADISC);
/* Check to see if there are more ADISCs to be sent */
if (disc && vport->num_disc_nodes)
lpfc_more_adisc(vport);
out:
lpfc_els_free_iocb(phba, cmdiocb);
return;
}
/**
* lpfc_issue_els_adisc - Issue an address discover iocb to an node on a vport
* @vport: pointer to a virtual N_Port data structure.
* @ndlp: pointer to a node-list data structure.
* @retry: number of retries to the command IOCB.
*
* This routine issues an Address Discover (ADISC) for an @ndlp on a
* @vport. It prepares the payload of the ADISC ELS command, updates the
* and states of the ndlp, and invokes the lpfc_sli_issue_iocb() routine
* to issue the ADISC ELS command.
*
* Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp
* will be incremented by 1 for holding the ndlp and the reference to ndlp
* will be stored into the context1 field of the IOCB for the completion
* callback function to the ADISC ELS command.
*
* Return code
* 0 - successfully issued adisc
* 1 - failed to issue adisc
**/
int
lpfc_issue_els_adisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
uint8_t retry)
{
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
struct lpfc_hba *phba = vport->phba;
ADISC *ap;
struct lpfc_iocbq *elsiocb;
uint8_t *pcmd;
uint16_t cmdsize;
cmdsize = (sizeof(uint32_t) + sizeof(ADISC));
elsiocb = lpfc_prep_els_iocb(vport, 1, cmdsize, retry, ndlp,
ndlp->nlp_DID, ELS_CMD_ADISC);
if (!elsiocb)
return 1;
pcmd = (uint8_t *) (((struct lpfc_dmabuf *) elsiocb->context2)->virt);
/* For ADISC request, remainder of payload is service parameters */
*((uint32_t *) (pcmd)) = ELS_CMD_ADISC;
pcmd += sizeof(uint32_t);
/* Fill in ADISC payload */
ap = (ADISC *) pcmd;
ap->hardAL_PA = phba->fc_pref_ALPA;
memcpy(&ap->portName, &vport->fc_portname, sizeof(struct lpfc_name));
memcpy(&ap->nodeName, &vport->fc_nodename, sizeof(struct lpfc_name));
ap->DID = be32_to_cpu(vport->fc_myDID);
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD,
"Issue ADISC: did:x%x",
ndlp->nlp_DID, 0, 0);
phba->fc_stat.elsXmitADISC++;
elsiocb->iocb_cmpl = lpfc_cmpl_els_adisc;
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag |= NLP_ADISC_SND;
spin_unlock_irq(shost->host_lock);
if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
IOCB_ERROR) {
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag &= ~NLP_ADISC_SND;
spin_unlock_irq(shost->host_lock);
lpfc_els_free_iocb(phba, elsiocb);
return 1;
}
return 0;
}
/**
* lpfc_cmpl_els_logo - Completion callback function for logo
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
*
* This routine is the completion function for issuing the ELS Logout (LOGO)
* command. If no error status was reported from the LOGO response, the
* state machine of the associated ndlp shall be invoked for transition with
* respect to NLP_EVT_CMPL_LOGO event. Otherwise, if error status was reported,
* the lpfc_els_retry() routine will be invoked to retry the LOGO command.
**/
static void
lpfc_cmpl_els_logo(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb)
{
struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) cmdiocb->context1;
struct lpfc_vport *vport = ndlp->vport;
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
IOCB_t *irsp;
struct lpfcMboxq *mbox;
unsigned long flags;
uint32_t skip_recovery = 0;
/* we pass cmdiocb to state machine which needs rspiocb as well */
cmdiocb->context_un.rsp_iocb = rspiocb;
irsp = &(rspiocb->iocb);
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag &= ~NLP_LOGO_SND;
spin_unlock_irq(shost->host_lock);
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD,
"LOGO cmpl: status:x%x/x%x did:x%x",
irsp->ulpStatus, irsp->un.ulpWord[4],
ndlp->nlp_DID);
/* LOGO completes to NPort <nlp_DID> */
lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
"0105 LOGO completes to NPort x%x "
"Data: x%x x%x x%x x%x\n",
ndlp->nlp_DID, irsp->ulpStatus, irsp->un.ulpWord[4],
irsp->ulpTimeout, vport->num_disc_nodes);
if (lpfc_els_chk_latt(vport)) {
skip_recovery = 1;
goto out;
}
/* Check to see if link went down during discovery */
if (ndlp->nlp_flag & NLP_TARGET_REMOVE) {
/* NLP_EVT_DEVICE_RM should unregister the RPI
* which should abort all outstanding IOs.
*/
lpfc_disc_state_machine(vport, ndlp, cmdiocb,
NLP_EVT_DEVICE_RM);
skip_recovery = 1;
goto out;
}
/* The LOGO will not be retried on failure. A LOGO was