blob: 2bd0b885b0fe901328d9ae44f7703cca0a159676 [file] [log] [blame]
/*
* PowerPC version
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
* Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
* Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
* Adapted for Power Macintosh by Paul Mackerras.
* Low-level exception handlers and MMU support
* rewritten by Paul Mackerras.
* Copyright (C) 1996 Paul Mackerras.
* MPC8xx modifications Copyright (C) 1997 Dan Malek (dmalek@jlc.net).
*
* This file contains the system call entry code, context switch
* code, and exception/interrupt return code for PowerPC.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/errno.h>
#include <asm/unistd.h>
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/mmu.h>
#include <asm/thread_info.h>
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
#include <asm/cputable.h>
#include <asm/firmware.h>
#include <asm/bug.h>
#include <asm/ptrace.h>
#include <asm/irqflags.h>
#include <asm/ftrace.h>
#include <asm/hw_irq.h>
#include <asm/context_tracking.h>
/*
* System calls.
*/
.section ".toc","aw"
.SYS_CALL_TABLE:
.tc .sys_call_table[TC],.sys_call_table
/* This value is used to mark exception frames on the stack. */
exception_marker:
.tc ID_EXC_MARKER[TC],STACK_FRAME_REGS_MARKER
.section ".text"
.align 7
#undef SHOW_SYSCALLS
.globl system_call_common
system_call_common:
andi. r10,r12,MSR_PR
mr r10,r1
addi r1,r1,-INT_FRAME_SIZE
beq- 1f
ld r1,PACAKSAVE(r13)
1: std r10,0(r1)
std r11,_NIP(r1)
std r12,_MSR(r1)
std r0,GPR0(r1)
std r10,GPR1(r1)
beq 2f /* if from kernel mode */
ACCOUNT_CPU_USER_ENTRY(r10, r11)
2: std r2,GPR2(r1)
std r3,GPR3(r1)
mfcr r2
std r4,GPR4(r1)
std r5,GPR5(r1)
std r6,GPR6(r1)
std r7,GPR7(r1)
std r8,GPR8(r1)
li r11,0
std r11,GPR9(r1)
std r11,GPR10(r1)
std r11,GPR11(r1)
std r11,GPR12(r1)
std r11,_XER(r1)
std r11,_CTR(r1)
std r9,GPR13(r1)
mflr r10
/*
* This clears CR0.SO (bit 28), which is the error indication on
* return from this system call.
*/
rldimi r2,r11,28,(63-28)
li r11,0xc01
std r10,_LINK(r1)
std r11,_TRAP(r1)
std r3,ORIG_GPR3(r1)
std r2,_CCR(r1)
ld r2,PACATOC(r13)
addi r9,r1,STACK_FRAME_OVERHEAD
ld r11,exception_marker@toc(r2)
std r11,-16(r9) /* "regshere" marker */
#if defined(CONFIG_VIRT_CPU_ACCOUNTING_NATIVE) && defined(CONFIG_PPC_SPLPAR)
BEGIN_FW_FTR_SECTION
beq 33f
/* if from user, see if there are any DTL entries to process */
ld r10,PACALPPACAPTR(r13) /* get ptr to VPA */
ld r11,PACA_DTL_RIDX(r13) /* get log read index */
ld r10,LPPACA_DTLIDX(r10) /* get log write index */
cmpd cr1,r11,r10
beq+ cr1,33f
bl .accumulate_stolen_time
REST_GPR(0,r1)
REST_4GPRS(3,r1)
REST_2GPRS(7,r1)
addi r9,r1,STACK_FRAME_OVERHEAD
33:
END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR)
#endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE && CONFIG_PPC_SPLPAR */
/*
* A syscall should always be called with interrupts enabled
* so we just unconditionally hard-enable here. When some kind
* of irq tracing is used, we additionally check that condition
* is correct
*/
#if defined(CONFIG_TRACE_IRQFLAGS) && defined(CONFIG_BUG)
lbz r10,PACASOFTIRQEN(r13)
xori r10,r10,1
1: tdnei r10,0
EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,BUGFLAG_WARNING
#endif
#ifdef CONFIG_PPC_BOOK3E
wrteei 1
#else
ld r11,PACAKMSR(r13)
ori r11,r11,MSR_EE
mtmsrd r11,1
#endif /* CONFIG_PPC_BOOK3E */
/* We do need to set SOFTE in the stack frame or the return
* from interrupt will be painful
*/
li r10,1
std r10,SOFTE(r1)
#ifdef SHOW_SYSCALLS
bl .do_show_syscall
REST_GPR(0,r1)
REST_4GPRS(3,r1)
REST_2GPRS(7,r1)
addi r9,r1,STACK_FRAME_OVERHEAD
#endif
CURRENT_THREAD_INFO(r11, r1)
ld r10,TI_FLAGS(r11)
andi. r11,r10,_TIF_SYSCALL_T_OR_A
bne syscall_dotrace
.Lsyscall_dotrace_cont:
cmpldi 0,r0,NR_syscalls
bge- syscall_enosys
system_call: /* label this so stack traces look sane */
/*
* Need to vector to 32 Bit or default sys_call_table here,
* based on caller's run-mode / personality.
*/
ld r11,.SYS_CALL_TABLE@toc(2)
andi. r10,r10,_TIF_32BIT
beq 15f
addi r11,r11,8 /* use 32-bit syscall entries */
clrldi r3,r3,32
clrldi r4,r4,32
clrldi r5,r5,32
clrldi r6,r6,32
clrldi r7,r7,32
clrldi r8,r8,32
15:
slwi r0,r0,4
ldx r10,r11,r0 /* Fetch system call handler [ptr] */
mtctr r10
bctrl /* Call handler */
syscall_exit:
std r3,RESULT(r1)
#ifdef SHOW_SYSCALLS
bl .do_show_syscall_exit
ld r3,RESULT(r1)
#endif
CURRENT_THREAD_INFO(r12, r1)
ld r8,_MSR(r1)
#ifdef CONFIG_PPC_BOOK3S
/* No MSR:RI on BookE */
andi. r10,r8,MSR_RI
beq- unrecov_restore
#endif
/*
* Disable interrupts so current_thread_info()->flags can't change,
* and so that we don't get interrupted after loading SRR0/1.
*/
#ifdef CONFIG_PPC_BOOK3E
wrteei 0
#else
ld r10,PACAKMSR(r13)
/*
* For performance reasons we clear RI the same time that we
* clear EE. We only need to clear RI just before we restore r13
* below, but batching it with EE saves us one expensive mtmsrd call.
* We have to be careful to restore RI if we branch anywhere from
* here (eg syscall_exit_work).
*/
li r9,MSR_RI
andc r11,r10,r9
mtmsrd r11,1
#endif /* CONFIG_PPC_BOOK3E */
ld r9,TI_FLAGS(r12)
li r11,-_LAST_ERRNO
andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK)
bne- syscall_exit_work
cmpld r3,r11
ld r5,_CCR(r1)
bge- syscall_error
.Lsyscall_error_cont:
ld r7,_NIP(r1)
BEGIN_FTR_SECTION
stdcx. r0,0,r1 /* to clear the reservation */
END_FTR_SECTION_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS)
andi. r6,r8,MSR_PR
ld r4,_LINK(r1)
beq- 1f
ACCOUNT_CPU_USER_EXIT(r11, r12)
HMT_MEDIUM_LOW_HAS_PPR
ld r13,GPR13(r1) /* only restore r13 if returning to usermode */
1: ld r2,GPR2(r1)
ld r1,GPR1(r1)
mtlr r4
mtcr r5
mtspr SPRN_SRR0,r7
mtspr SPRN_SRR1,r8
RFI
b . /* prevent speculative execution */
syscall_error:
oris r5,r5,0x1000 /* Set SO bit in CR */
neg r3,r3
std r5,_CCR(r1)
b .Lsyscall_error_cont
/* Traced system call support */
syscall_dotrace:
bl .save_nvgprs
addi r3,r1,STACK_FRAME_OVERHEAD
bl .do_syscall_trace_enter
/*
* Restore argument registers possibly just changed.
* We use the return value of do_syscall_trace_enter
* for the call number to look up in the table (r0).
*/
mr r0,r3
ld r3,GPR3(r1)
ld r4,GPR4(r1)
ld r5,GPR5(r1)
ld r6,GPR6(r1)
ld r7,GPR7(r1)
ld r8,GPR8(r1)
addi r9,r1,STACK_FRAME_OVERHEAD
CURRENT_THREAD_INFO(r10, r1)
ld r10,TI_FLAGS(r10)
b .Lsyscall_dotrace_cont
syscall_enosys:
li r3,-ENOSYS
b syscall_exit
syscall_exit_work:
#ifdef CONFIG_PPC_BOOK3S
mtmsrd r10,1 /* Restore RI */
#endif
/* If TIF_RESTOREALL is set, don't scribble on either r3 or ccr.
If TIF_NOERROR is set, just save r3 as it is. */
andi. r0,r9,_TIF_RESTOREALL
beq+ 0f
REST_NVGPRS(r1)
b 2f
0: cmpld r3,r11 /* r10 is -LAST_ERRNO */
blt+ 1f
andi. r0,r9,_TIF_NOERROR
bne- 1f
ld r5,_CCR(r1)
neg r3,r3
oris r5,r5,0x1000 /* Set SO bit in CR */
std r5,_CCR(r1)
1: std r3,GPR3(r1)
2: andi. r0,r9,(_TIF_PERSYSCALL_MASK)
beq 4f
/* Clear per-syscall TIF flags if any are set. */
li r11,_TIF_PERSYSCALL_MASK
addi r12,r12,TI_FLAGS
3: ldarx r10,0,r12
andc r10,r10,r11
stdcx. r10,0,r12
bne- 3b
subi r12,r12,TI_FLAGS
4: /* Anything else left to do? */
SET_DEFAULT_THREAD_PPR(r3, r10) /* Set thread.ppr = 3 */
andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
beq .ret_from_except_lite
/* Re-enable interrupts */
#ifdef CONFIG_PPC_BOOK3E
wrteei 1
#else
ld r10,PACAKMSR(r13)
ori r10,r10,MSR_EE
mtmsrd r10,1
#endif /* CONFIG_PPC_BOOK3E */
bl .save_nvgprs
addi r3,r1,STACK_FRAME_OVERHEAD
bl .do_syscall_trace_leave
b .ret_from_except
/* Save non-volatile GPRs, if not already saved. */
_GLOBAL(save_nvgprs)
ld r11,_TRAP(r1)
andi. r0,r11,1
beqlr-
SAVE_NVGPRS(r1)
clrrdi r0,r11,1
std r0,_TRAP(r1)
blr
/*
* The sigsuspend and rt_sigsuspend system calls can call do_signal
* and thus put the process into the stopped state where we might
* want to examine its user state with ptrace. Therefore we need
* to save all the nonvolatile registers (r14 - r31) before calling
* the C code. Similarly, fork, vfork and clone need the full
* register state on the stack so that it can be copied to the child.
*/
_GLOBAL(ppc_fork)
bl .save_nvgprs
bl .sys_fork
b syscall_exit
_GLOBAL(ppc_vfork)
bl .save_nvgprs
bl .sys_vfork
b syscall_exit
_GLOBAL(ppc_clone)
bl .save_nvgprs
bl .sys_clone
b syscall_exit
_GLOBAL(ppc32_swapcontext)
bl .save_nvgprs
bl .compat_sys_swapcontext
b syscall_exit
_GLOBAL(ppc64_swapcontext)
bl .save_nvgprs
bl .sys_swapcontext
b syscall_exit
_GLOBAL(ret_from_fork)
bl .schedule_tail
REST_NVGPRS(r1)
li r3,0
b syscall_exit
_GLOBAL(ret_from_kernel_thread)
bl .schedule_tail
REST_NVGPRS(r1)
ld r14, 0(r14)
mtlr r14
mr r3,r15
blrl
li r3,0
b syscall_exit
.section ".toc","aw"
DSCR_DEFAULT:
.tc dscr_default[TC],dscr_default
.section ".text"
/*
* This routine switches between two different tasks. The process
* state of one is saved on its kernel stack. Then the state
* of the other is restored from its kernel stack. The memory
* management hardware is updated to the second process's state.
* Finally, we can return to the second process, via ret_from_except.
* On entry, r3 points to the THREAD for the current task, r4
* points to the THREAD for the new task.
*
* Note: there are two ways to get to the "going out" portion
* of this code; either by coming in via the entry (_switch)
* or via "fork" which must set up an environment equivalent
* to the "_switch" path. If you change this you'll have to change
* the fork code also.
*
* The code which creates the new task context is in 'copy_thread'
* in arch/powerpc/kernel/process.c
*/
.align 7
_GLOBAL(_switch)
mflr r0
std r0,16(r1)
stdu r1,-SWITCH_FRAME_SIZE(r1)
/* r3-r13 are caller saved -- Cort */
SAVE_8GPRS(14, r1)
SAVE_10GPRS(22, r1)
mflr r20 /* Return to switch caller */
mfmsr r22
li r0, MSR_FP
#ifdef CONFIG_VSX
BEGIN_FTR_SECTION
oris r0,r0,MSR_VSX@h /* Disable VSX */
END_FTR_SECTION_IFSET(CPU_FTR_VSX)
#endif /* CONFIG_VSX */
#ifdef CONFIG_ALTIVEC
BEGIN_FTR_SECTION
oris r0,r0,MSR_VEC@h /* Disable altivec */
mfspr r24,SPRN_VRSAVE /* save vrsave register value */
std r24,THREAD_VRSAVE(r3)
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
#endif /* CONFIG_ALTIVEC */
#ifdef CONFIG_PPC64
BEGIN_FTR_SECTION
mfspr r25,SPRN_DSCR
std r25,THREAD_DSCR(r3)
END_FTR_SECTION_IFSET(CPU_FTR_DSCR)
#endif
and. r0,r0,r22
beq+ 1f
andc r22,r22,r0
MTMSRD(r22)
isync
1: std r20,_NIP(r1)
mfcr r23
std r23,_CCR(r1)
std r1,KSP(r3) /* Set old stack pointer */
#ifdef CONFIG_PPC_BOOK3S_64
BEGIN_FTR_SECTION
/* Event based branch registers */
mfspr r0, SPRN_BESCR
std r0, THREAD_BESCR(r3)
mfspr r0, SPRN_EBBHR
std r0, THREAD_EBBHR(r3)
mfspr r0, SPRN_EBBRR
std r0, THREAD_EBBRR(r3)
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
#endif
#ifdef CONFIG_SMP
/* We need a sync somewhere here to make sure that if the
* previous task gets rescheduled on another CPU, it sees all
* stores it has performed on this one.
*/
sync
#endif /* CONFIG_SMP */
/*
* If we optimise away the clear of the reservation in system
* calls because we know the CPU tracks the address of the
* reservation, then we need to clear it here to cover the
* case that the kernel context switch path has no larx
* instructions.
*/
BEGIN_FTR_SECTION
ldarx r6,0,r1
END_FTR_SECTION_IFSET(CPU_FTR_STCX_CHECKS_ADDRESS)
#ifdef CONFIG_PPC_BOOK3S
/* Cancel all explict user streams as they will have no use after context
* switch and will stop the HW from creating streams itself
*/
DCBT_STOP_ALL_STREAM_IDS(r6)
#endif
addi r6,r4,-THREAD /* Convert THREAD to 'current' */
std r6,PACACURRENT(r13) /* Set new 'current' */
ld r8,KSP(r4) /* new stack pointer */
#ifdef CONFIG_PPC_BOOK3S
BEGIN_FTR_SECTION
BEGIN_FTR_SECTION_NESTED(95)
clrrdi r6,r8,28 /* get its ESID */
clrrdi r9,r1,28 /* get current sp ESID */
FTR_SECTION_ELSE_NESTED(95)
clrrdi r6,r8,40 /* get its 1T ESID */
clrrdi r9,r1,40 /* get current sp 1T ESID */
ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(MMU_FTR_1T_SEGMENT, 95)
FTR_SECTION_ELSE
b 2f
ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_SLB)
clrldi. r0,r6,2 /* is new ESID c00000000? */
cmpd cr1,r6,r9 /* or is new ESID the same as current ESID? */
cror eq,4*cr1+eq,eq
beq 2f /* if yes, don't slbie it */
/* Bolt in the new stack SLB entry */
ld r7,KSP_VSID(r4) /* Get new stack's VSID */
oris r0,r6,(SLB_ESID_V)@h
ori r0,r0,(SLB_NUM_BOLTED-1)@l
BEGIN_FTR_SECTION
li r9,MMU_SEGSIZE_1T /* insert B field */
oris r6,r6,(MMU_SEGSIZE_1T << SLBIE_SSIZE_SHIFT)@h
rldimi r7,r9,SLB_VSID_SSIZE_SHIFT,0
END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
/* Update the last bolted SLB. No write barriers are needed
* here, provided we only update the current CPU's SLB shadow
* buffer.
*/
ld r9,PACA_SLBSHADOWPTR(r13)
li r12,0
std r12,SLBSHADOW_STACKESID(r9) /* Clear ESID */
std r7,SLBSHADOW_STACKVSID(r9) /* Save VSID */
std r0,SLBSHADOW_STACKESID(r9) /* Save ESID */
/* No need to check for MMU_FTR_NO_SLBIE_B here, since when
* we have 1TB segments, the only CPUs known to have the errata
* only support less than 1TB of system memory and we'll never
* actually hit this code path.
*/
slbie r6
slbie r6 /* Workaround POWER5 < DD2.1 issue */
slbmte r7,r0
isync
2:
#endif /* !CONFIG_PPC_BOOK3S */
CURRENT_THREAD_INFO(r7, r8) /* base of new stack */
/* Note: this uses SWITCH_FRAME_SIZE rather than INT_FRAME_SIZE
because we don't need to leave the 288-byte ABI gap at the
top of the kernel stack. */
addi r7,r7,THREAD_SIZE-SWITCH_FRAME_SIZE
mr r1,r8 /* start using new stack pointer */
std r7,PACAKSAVE(r13)
#ifdef CONFIG_PPC_BOOK3S_64
BEGIN_FTR_SECTION
/* Event based branch registers */
ld r0, THREAD_BESCR(r4)
mtspr SPRN_BESCR, r0
ld r0, THREAD_EBBHR(r4)
mtspr SPRN_EBBHR, r0
ld r0, THREAD_EBBRR(r4)
mtspr SPRN_EBBRR, r0
ld r0,THREAD_TAR(r4)
mtspr SPRN_TAR,r0
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
#endif
#ifdef CONFIG_ALTIVEC
BEGIN_FTR_SECTION
ld r0,THREAD_VRSAVE(r4)
mtspr SPRN_VRSAVE,r0 /* if G4, restore VRSAVE reg */
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
#endif /* CONFIG_ALTIVEC */
#ifdef CONFIG_PPC64
BEGIN_FTR_SECTION
lwz r6,THREAD_DSCR_INHERIT(r4)
ld r7,DSCR_DEFAULT@toc(2)
ld r0,THREAD_DSCR(r4)
cmpwi r6,0
li r8, FSCR_DSCR
bne 1f
ld r0,0(r7)
b 3f
1:
BEGIN_FTR_SECTION_NESTED(70)
mfspr r6, SPRN_FSCR
or r6, r6, r8
mtspr SPRN_FSCR, r6
BEGIN_FTR_SECTION_NESTED(69)
mfspr r6, SPRN_HFSCR
or r6, r6, r8
mtspr SPRN_HFSCR, r6
END_FTR_SECTION_NESTED(CPU_FTR_HVMODE, CPU_FTR_HVMODE, 69)
b 4f
END_FTR_SECTION_NESTED(CPU_FTR_ARCH_207S, CPU_FTR_ARCH_207S, 70)
3:
BEGIN_FTR_SECTION_NESTED(70)
mfspr r6, SPRN_FSCR
andc r6, r6, r8
mtspr SPRN_FSCR, r6
BEGIN_FTR_SECTION_NESTED(69)
mfspr r6, SPRN_HFSCR
andc r6, r6, r8
mtspr SPRN_HFSCR, r6
END_FTR_SECTION_NESTED(CPU_FTR_HVMODE, CPU_FTR_HVMODE, 69)
END_FTR_SECTION_NESTED(CPU_FTR_ARCH_207S, CPU_FTR_ARCH_207S, 70)
4: cmpd r0,r25
beq 2f
mtspr SPRN_DSCR,r0
2:
END_FTR_SECTION_IFSET(CPU_FTR_DSCR)
#endif
ld r6,_CCR(r1)
mtcrf 0xFF,r6
/* r3-r13 are destroyed -- Cort */
REST_8GPRS(14, r1)
REST_10GPRS(22, r1)
/* convert old thread to its task_struct for return value */
addi r3,r3,-THREAD
ld r7,_NIP(r1) /* Return to _switch caller in new task */
mtlr r7
addi r1,r1,SWITCH_FRAME_SIZE
blr
.align 7
_GLOBAL(ret_from_except)
ld r11,_TRAP(r1)
andi. r0,r11,1
bne .ret_from_except_lite
REST_NVGPRS(r1)
_GLOBAL(ret_from_except_lite)
/*
* Disable interrupts so that current_thread_info()->flags
* can't change between when we test it and when we return
* from the interrupt.
*/
#ifdef CONFIG_PPC_BOOK3E
wrteei 0
#else
ld r10,PACAKMSR(r13) /* Get kernel MSR without EE */
mtmsrd r10,1 /* Update machine state */
#endif /* CONFIG_PPC_BOOK3E */
CURRENT_THREAD_INFO(r9, r1)
ld r3,_MSR(r1)
#ifdef CONFIG_PPC_BOOK3E
ld r10,PACACURRENT(r13)
#endif /* CONFIG_PPC_BOOK3E */
ld r4,TI_FLAGS(r9)
andi. r3,r3,MSR_PR
beq resume_kernel
#ifdef CONFIG_PPC_BOOK3E
lwz r3,(THREAD+THREAD_DBCR0)(r10)
#endif /* CONFIG_PPC_BOOK3E */
/* Check current_thread_info()->flags */
andi. r0,r4,_TIF_USER_WORK_MASK
#ifdef CONFIG_PPC_BOOK3E
bne 1f
/*
* Check to see if the dbcr0 register is set up to debug.
* Use the internal debug mode bit to do this.
*/
andis. r0,r3,DBCR0_IDM@h
beq restore
mfmsr r0
rlwinm r0,r0,0,~MSR_DE /* Clear MSR.DE */
mtmsr r0
mtspr SPRN_DBCR0,r3
li r10, -1
mtspr SPRN_DBSR,r10
b restore
#else
beq restore
#endif
1: andi. r0,r4,_TIF_NEED_RESCHED
beq 2f
bl .restore_interrupts
SCHEDULE_USER
b .ret_from_except_lite
2: bl .save_nvgprs
bl .restore_interrupts
addi r3,r1,STACK_FRAME_OVERHEAD
bl .do_notify_resume
b .ret_from_except
resume_kernel:
/* check current_thread_info, _TIF_EMULATE_STACK_STORE */
CURRENT_THREAD_INFO(r9, r1)
ld r8,TI_FLAGS(r9)
andis. r8,r8,_TIF_EMULATE_STACK_STORE@h
beq+ 1f
addi r8,r1,INT_FRAME_SIZE /* Get the kprobed function entry */
lwz r3,GPR1(r1)
subi r3,r3,INT_FRAME_SIZE /* dst: Allocate a trampoline exception frame */
mr r4,r1 /* src: current exception frame */
mr r1,r3 /* Reroute the trampoline frame to r1 */
/* Copy from the original to the trampoline. */
li r5,INT_FRAME_SIZE/8 /* size: INT_FRAME_SIZE */
li r6,0 /* start offset: 0 */
mtctr r5
2: ldx r0,r6,r4
stdx r0,r6,r3
addi r6,r6,8
bdnz 2b
/* Do real store operation to complete stwu */
lwz r5,GPR1(r1)
std r8,0(r5)
/* Clear _TIF_EMULATE_STACK_STORE flag */
lis r11,_TIF_EMULATE_STACK_STORE@h
addi r5,r9,TI_FLAGS
0: ldarx r4,0,r5
andc r4,r4,r11
stdcx. r4,0,r5
bne- 0b
1:
#ifdef CONFIG_PREEMPT
/* Check if we need to preempt */
andi. r0,r4,_TIF_NEED_RESCHED
beq+ restore
/* Check that preempt_count() == 0 and interrupts are enabled */
lwz r8,TI_PREEMPT(r9)
cmpwi cr1,r8,0
ld r0,SOFTE(r1)
cmpdi r0,0
crandc eq,cr1*4+eq,eq
bne restore
/*
* Here we are preempting the current task. We want to make
* sure we are soft-disabled first
*/
SOFT_DISABLE_INTS(r3,r4)
1: bl .preempt_schedule_irq
/* Re-test flags and eventually loop */
CURRENT_THREAD_INFO(r9, r1)
ld r4,TI_FLAGS(r9)
andi. r0,r4,_TIF_NEED_RESCHED
bne 1b
/*
* arch_local_irq_restore() from preempt_schedule_irq above may
* enable hard interrupt but we really should disable interrupts
* when we return from the interrupt, and so that we don't get
* interrupted after loading SRR0/1.
*/
#ifdef CONFIG_PPC_BOOK3E
wrteei 0
#else
ld r10,PACAKMSR(r13) /* Get kernel MSR without EE */
mtmsrd r10,1 /* Update machine state */
#endif /* CONFIG_PPC_BOOK3E */
#endif /* CONFIG_PREEMPT */
.globl fast_exc_return_irq
fast_exc_return_irq:
restore:
/*
* This is the main kernel exit path. First we check if we
* are about to re-enable interrupts
*/
ld r5,SOFTE(r1)
lbz r6,PACASOFTIRQEN(r13)
cmpwi cr0,r5,0
beq restore_irq_off
/* We are enabling, were we already enabled ? Yes, just return */
cmpwi cr0,r6,1
beq cr0,do_restore
/*
* We are about to soft-enable interrupts (we are hard disabled
* at this point). We check if there's anything that needs to
* be replayed first.
*/
lbz r0,PACAIRQHAPPENED(r13)
cmpwi cr0,r0,0
bne- restore_check_irq_replay
/*
* Get here when nothing happened while soft-disabled, just
* soft-enable and move-on. We will hard-enable as a side
* effect of rfi
*/
restore_no_replay:
TRACE_ENABLE_INTS
li r0,1
stb r0,PACASOFTIRQEN(r13);
/*
* Final return path. BookE is handled in a different file
*/
do_restore:
#ifdef CONFIG_PPC_BOOK3E
b .exception_return_book3e
#else
/*
* Clear the reservation. If we know the CPU tracks the address of
* the reservation then we can potentially save some cycles and use
* a larx. On POWER6 and POWER7 this is significantly faster.
*/
BEGIN_FTR_SECTION
stdcx. r0,0,r1 /* to clear the reservation */
FTR_SECTION_ELSE
ldarx r4,0,r1
ALT_FTR_SECTION_END_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS)
/*
* Some code path such as load_up_fpu or altivec return directly
* here. They run entirely hard disabled and do not alter the
* interrupt state. They also don't use lwarx/stwcx. and thus
* are known not to leave dangling reservations.
*/
.globl fast_exception_return
fast_exception_return:
ld r3,_MSR(r1)
ld r4,_CTR(r1)
ld r0,_LINK(r1)
mtctr r4
mtlr r0
ld r4,_XER(r1)
mtspr SPRN_XER,r4
REST_8GPRS(5, r1)
andi. r0,r3,MSR_RI
beq- unrecov_restore
/*
* Clear RI before restoring r13. If we are returning to
* userspace and we take an exception after restoring r13,
* we end up corrupting the userspace r13 value.
*/
ld r4,PACAKMSR(r13) /* Get kernel MSR without EE */
andc r4,r4,r0 /* r0 contains MSR_RI here */
mtmsrd r4,1
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
/* TM debug */
std r3, PACATMSCRATCH(r13) /* Stash returned-to MSR */
#endif
/*
* r13 is our per cpu area, only restore it if we are returning to
* userspace the value stored in the stack frame may belong to
* another CPU.
*/
andi. r0,r3,MSR_PR
beq 1f
ACCOUNT_CPU_USER_EXIT(r2, r4)
RESTORE_PPR(r2, r4)
REST_GPR(13, r1)
1:
mtspr SPRN_SRR1,r3
ld r2,_CCR(r1)
mtcrf 0xFF,r2
ld r2,_NIP(r1)
mtspr SPRN_SRR0,r2
ld r0,GPR0(r1)
ld r2,GPR2(r1)
ld r3,GPR3(r1)
ld r4,GPR4(r1)
ld r1,GPR1(r1)
rfid
b . /* prevent speculative execution */
#endif /* CONFIG_PPC_BOOK3E */
/*
* We are returning to a context with interrupts soft disabled.
*
* However, we may also about to hard enable, so we need to
* make sure that in this case, we also clear PACA_IRQ_HARD_DIS
* or that bit can get out of sync and bad things will happen
*/
restore_irq_off:
ld r3,_MSR(r1)
lbz r7,PACAIRQHAPPENED(r13)
andi. r0,r3,MSR_EE
beq 1f
rlwinm r7,r7,0,~PACA_IRQ_HARD_DIS
stb r7,PACAIRQHAPPENED(r13)
1: li r0,0
stb r0,PACASOFTIRQEN(r13);
TRACE_DISABLE_INTS
b do_restore
/*
* Something did happen, check if a re-emit is needed
* (this also clears paca->irq_happened)
*/
restore_check_irq_replay:
/* XXX: We could implement a fast path here where we check
* for irq_happened being just 0x01, in which case we can
* clear it and return. That means that we would potentially
* miss a decrementer having wrapped all the way around.
*
* Still, this might be useful for things like hash_page
*/
bl .__check_irq_replay
cmpwi cr0,r3,0
beq restore_no_replay
/*
* We need to re-emit an interrupt. We do so by re-using our
* existing exception frame. We first change the trap value,
* but we need to ensure we preserve the low nibble of it
*/
ld r4,_TRAP(r1)
clrldi r4,r4,60
or r4,r4,r3
std r4,_TRAP(r1)
/*
* Then find the right handler and call it. Interrupts are
* still soft-disabled and we keep them that way.
*/
cmpwi cr0,r3,0x500
bne 1f
addi r3,r1,STACK_FRAME_OVERHEAD;
bl .do_IRQ
b .ret_from_except
1: cmpwi cr0,r3,0x900
bne 1f
addi r3,r1,STACK_FRAME_OVERHEAD;
bl .timer_interrupt
b .ret_from_except
#ifdef CONFIG_PPC_DOORBELL
1:
#ifdef CONFIG_PPC_BOOK3E
cmpwi cr0,r3,0x280
#else
BEGIN_FTR_SECTION
cmpwi cr0,r3,0xe80
FTR_SECTION_ELSE
cmpwi cr0,r3,0xa00
ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE)
#endif /* CONFIG_PPC_BOOK3E */
bne 1f
addi r3,r1,STACK_FRAME_OVERHEAD;
bl .doorbell_exception
b .ret_from_except
#endif /* CONFIG_PPC_DOORBELL */
1: b .ret_from_except /* What else to do here ? */
unrecov_restore:
addi r3,r1,STACK_FRAME_OVERHEAD
bl .unrecoverable_exception
b unrecov_restore
#ifdef CONFIG_PPC_RTAS
/*
* On CHRP, the Run-Time Abstraction Services (RTAS) have to be
* called with the MMU off.
*
* In addition, we need to be in 32b mode, at least for now.
*
* Note: r3 is an input parameter to rtas, so don't trash it...
*/
_GLOBAL(enter_rtas)
mflr r0
std r0,16(r1)
stdu r1,-RTAS_FRAME_SIZE(r1) /* Save SP and create stack space. */
/* Because RTAS is running in 32b mode, it clobbers the high order half
* of all registers that it saves. We therefore save those registers
* RTAS might touch to the stack. (r0, r3-r13 are caller saved)
*/
SAVE_GPR(2, r1) /* Save the TOC */
SAVE_GPR(13, r1) /* Save paca */
SAVE_8GPRS(14, r1) /* Save the non-volatiles */
SAVE_10GPRS(22, r1) /* ditto */
mfcr r4
std r4,_CCR(r1)
mfctr r5
std r5,_CTR(r1)
mfspr r6,SPRN_XER
std r6,_XER(r1)
mfdar r7
std r7,_DAR(r1)
mfdsisr r8
std r8,_DSISR(r1)
/* Temporary workaround to clear CR until RTAS can be modified to
* ignore all bits.
*/
li r0,0
mtcr r0
#ifdef CONFIG_BUG
/* There is no way it is acceptable to get here with interrupts enabled,
* check it with the asm equivalent of WARN_ON
*/
lbz r0,PACASOFTIRQEN(r13)
1: tdnei r0,0
EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,BUGFLAG_WARNING
#endif
/* Hard-disable interrupts */
mfmsr r6
rldicl r7,r6,48,1
rotldi r7,r7,16
mtmsrd r7,1
/* Unfortunately, the stack pointer and the MSR are also clobbered,
* so they are saved in the PACA which allows us to restore
* our original state after RTAS returns.
*/
std r1,PACAR1(r13)
std r6,PACASAVEDMSR(r13)
/* Setup our real return addr */
LOAD_REG_ADDR(r4,.rtas_return_loc)
clrldi r4,r4,2 /* convert to realmode address */
mtlr r4
li r0,0
ori r0,r0,MSR_EE|MSR_SE|MSR_BE|MSR_RI
andc r0,r6,r0
li r9,1
rldicr r9,r9,MSR_SF_LG,(63-MSR_SF_LG)
ori r9,r9,MSR_IR|MSR_DR|MSR_FE0|MSR_FE1|MSR_FP|MSR_RI
andc r6,r0,r9
sync /* disable interrupts so SRR0/1 */
mtmsrd r0 /* don't get trashed */
LOAD_REG_ADDR(r4, rtas)
ld r5,RTASENTRY(r4) /* get the rtas->entry value */
ld r4,RTASBASE(r4) /* get the rtas->base value */
mtspr SPRN_SRR0,r5
mtspr SPRN_SRR1,r6
rfid
b . /* prevent speculative execution */
_STATIC(rtas_return_loc)
/* relocation is off at this point */
GET_PACA(r4)
clrldi r4,r4,2 /* convert to realmode address */
bcl 20,31,$+4
0: mflr r3
ld r3,(1f-0b)(r3) /* get &.rtas_restore_regs */
mfmsr r6
li r0,MSR_RI
andc r6,r6,r0
sync
mtmsrd r6
ld r1,PACAR1(r4) /* Restore our SP */
ld r4,PACASAVEDMSR(r4) /* Restore our MSR */
mtspr SPRN_SRR0,r3
mtspr SPRN_SRR1,r4
rfid
b . /* prevent speculative execution */
.align 3
1: .llong .rtas_restore_regs
_STATIC(rtas_restore_regs)
/* relocation is on at this point */
REST_GPR(2, r1) /* Restore the TOC */
REST_GPR(13, r1) /* Restore paca */
REST_8GPRS(14, r1) /* Restore the non-volatiles */
REST_10GPRS(22, r1) /* ditto */
GET_PACA(r13)
ld r4,_CCR(r1)
mtcr r4
ld r5,_CTR(r1)
mtctr r5
ld r6,_XER(r1)
mtspr SPRN_XER,r6
ld r7,_DAR(r1)
mtdar r7
ld r8,_DSISR(r1)
mtdsisr r8
addi r1,r1,RTAS_FRAME_SIZE /* Unstack our frame */
ld r0,16(r1) /* get return address */
mtlr r0
blr /* return to caller */
#endif /* CONFIG_PPC_RTAS */
_GLOBAL(enter_prom)
mflr r0
std r0,16(r1)
stdu r1,-PROM_FRAME_SIZE(r1) /* Save SP and create stack space */
/* Because PROM is running in 32b mode, it clobbers the high order half
* of all registers that it saves. We therefore save those registers
* PROM might touch to the stack. (r0, r3-r13 are caller saved)
*/
SAVE_GPR(2, r1)
SAVE_GPR(13, r1)
SAVE_8GPRS(14, r1)
SAVE_10GPRS(22, r1)
mfcr r10
mfmsr r11
std r10,_CCR(r1)
std r11,_MSR(r1)
/* Get the PROM entrypoint */
mtlr r4
/* Switch MSR to 32 bits mode
*/
#ifdef CONFIG_PPC_BOOK3E
rlwinm r11,r11,0,1,31
mtmsr r11
#else /* CONFIG_PPC_BOOK3E */
mfmsr r11
li r12,1
rldicr r12,r12,MSR_SF_LG,(63-MSR_SF_LG)
andc r11,r11,r12
li r12,1
rldicr r12,r12,MSR_ISF_LG,(63-MSR_ISF_LG)
andc r11,r11,r12
mtmsrd r11
#endif /* CONFIG_PPC_BOOK3E */
isync
/* Enter PROM here... */
blrl
/* Just make sure that r1 top 32 bits didn't get
* corrupt by OF
*/
rldicl r1,r1,0,32
/* Restore the MSR (back to 64 bits) */
ld r0,_MSR(r1)
MTMSRD(r0)
isync
/* Restore other registers */
REST_GPR(2, r1)
REST_GPR(13, r1)
REST_8GPRS(14, r1)
REST_10GPRS(22, r1)
ld r4,_CCR(r1)
mtcr r4
addi r1,r1,PROM_FRAME_SIZE
ld r0,16(r1)
mtlr r0
blr
#ifdef CONFIG_FUNCTION_TRACER
#ifdef CONFIG_DYNAMIC_FTRACE
_GLOBAL(mcount)
_GLOBAL(_mcount)
blr
_GLOBAL(ftrace_caller)
/* Taken from output of objdump from lib64/glibc */
mflr r3
ld r11, 0(r1)
stdu r1, -112(r1)
std r3, 128(r1)
ld r4, 16(r11)
subi r3, r3, MCOUNT_INSN_SIZE
.globl ftrace_call
ftrace_call:
bl ftrace_stub
nop
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
.globl ftrace_graph_call
ftrace_graph_call:
b ftrace_graph_stub
_GLOBAL(ftrace_graph_stub)
#endif
ld r0, 128(r1)
mtlr r0
addi r1, r1, 112
_GLOBAL(ftrace_stub)
blr
#else
_GLOBAL(mcount)
blr
_GLOBAL(_mcount)
/* Taken from output of objdump from lib64/glibc */
mflr r3
ld r11, 0(r1)
stdu r1, -112(r1)
std r3, 128(r1)
ld r4, 16(r11)
subi r3, r3, MCOUNT_INSN_SIZE
LOAD_REG_ADDR(r5,ftrace_trace_function)
ld r5,0(r5)
ld r5,0(r5)
mtctr r5
bctrl
nop
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
b ftrace_graph_caller
#endif
ld r0, 128(r1)
mtlr r0
addi r1, r1, 112
_GLOBAL(ftrace_stub)
blr
#endif /* CONFIG_DYNAMIC_FTRACE */
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
_GLOBAL(ftrace_graph_caller)
/* load r4 with local address */
ld r4, 128(r1)
subi r4, r4, MCOUNT_INSN_SIZE
/* get the parent address */
ld r11, 112(r1)
addi r3, r11, 16
bl .prepare_ftrace_return
nop
ld r0, 128(r1)
mtlr r0
addi r1, r1, 112
blr
_GLOBAL(return_to_handler)
/* need to save return values */
std r4, -24(r1)
std r3, -16(r1)
std r31, -8(r1)
mr r31, r1
stdu r1, -112(r1)
bl .ftrace_return_to_handler
nop
/* return value has real return address */
mtlr r3
ld r1, 0(r1)
ld r4, -24(r1)
ld r3, -16(r1)
ld r31, -8(r1)
/* Jump back to real return address */
blr
_GLOBAL(mod_return_to_handler)
/* need to save return values */
std r4, -32(r1)
std r3, -24(r1)
/* save TOC */
std r2, -16(r1)
std r31, -8(r1)
mr r31, r1
stdu r1, -112(r1)
/*
* We are in a module using the module's TOC.
* Switch to our TOC to run inside the core kernel.
*/
ld r2, PACATOC(r13)
bl .ftrace_return_to_handler
nop
/* return value has real return address */
mtlr r3
ld r1, 0(r1)
ld r4, -32(r1)
ld r3, -24(r1)
ld r2, -16(r1)
ld r31, -8(r1)
/* Jump back to real return address */
blr
#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
#endif /* CONFIG_FUNCTION_TRACER */