blob: f3d8132aecb8f43023e6913ee74f5212f9bd2b89 [file] [log] [blame]
/*
* Serial Attached SCSI (SAS) Expander discovery and configuration
*
* Copyright (C) 2007 James E.J. Bottomley
* <James.Bottomley@HansenPartnership.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; version 2 only.
*/
#include <linux/scatterlist.h>
#include <linux/blkdev.h>
#include <linux/slab.h>
#include "sas_internal.h"
#include <scsi/scsi_transport.h>
#include <scsi/scsi_transport_sas.h>
#include "../scsi_sas_internal.h"
static void sas_host_smp_discover(struct sas_ha_struct *sas_ha, u8 *resp_data,
u8 phy_id)
{
struct sas_phy *phy;
struct sas_rphy *rphy;
if (phy_id >= sas_ha->num_phys) {
resp_data[2] = SMP_RESP_NO_PHY;
return;
}
resp_data[2] = SMP_RESP_FUNC_ACC;
phy = sas_ha->sas_phy[phy_id]->phy;
resp_data[9] = phy_id;
resp_data[13] = phy->negotiated_linkrate;
memcpy(resp_data + 16, sas_ha->sas_addr, SAS_ADDR_SIZE);
memcpy(resp_data + 24, sas_ha->sas_phy[phy_id]->attached_sas_addr,
SAS_ADDR_SIZE);
resp_data[40] = (phy->minimum_linkrate << 4) |
phy->minimum_linkrate_hw;
resp_data[41] = (phy->maximum_linkrate << 4) |
phy->maximum_linkrate_hw;
if (!sas_ha->sas_phy[phy_id]->port ||
!sas_ha->sas_phy[phy_id]->port->port_dev)
return;
rphy = sas_ha->sas_phy[phy_id]->port->port_dev->rphy;
resp_data[12] = rphy->identify.device_type << 4;
resp_data[14] = rphy->identify.initiator_port_protocols;
resp_data[15] = rphy->identify.target_port_protocols;
}
/**
* to_sas_gpio_gp_bit - given the gpio frame data find the byte/bit position of 'od'
* @od: od bit to find
* @data: incoming bitstream (from frame)
* @index: requested data register index (from frame)
* @count: total number of registers in the bitstream (from frame)
* @bit: bit position of 'od' in the returned byte
*
* returns NULL if 'od' is not in 'data'
*
* From SFF-8485 v0.7:
* "In GPIO_TX[1], bit 0 of byte 3 contains the first bit (i.e., OD0.0)
* and bit 7 of byte 0 contains the 32nd bit (i.e., OD10.1).
*
* In GPIO_TX[2], bit 0 of byte 3 contains the 33rd bit (i.e., OD10.2)
* and bit 7 of byte 0 contains the 64th bit (i.e., OD21.0)."
*
* The general-purpose (raw-bitstream) RX registers have the same layout
* although 'od' is renamed 'id' for 'input data'.
*
* SFF-8489 defines the behavior of the LEDs in response to the 'od' values.
*/
static u8 *to_sas_gpio_gp_bit(unsigned int od, u8 *data, u8 index, u8 count, u8 *bit)
{
unsigned int reg;
u8 byte;
/* gp registers start at index 1 */
if (index == 0)
return NULL;
index--; /* make index 0-based */
if (od < index * 32)
return NULL;
od -= index * 32;
reg = od >> 5;
if (reg >= count)
return NULL;
od &= (1 << 5) - 1;
byte = 3 - (od >> 3);
*bit = od & ((1 << 3) - 1);
return &data[reg * 4 + byte];
}
int try_test_sas_gpio_gp_bit(unsigned int od, u8 *data, u8 index, u8 count)
{
u8 *byte;
u8 bit;
byte = to_sas_gpio_gp_bit(od, data, index, count, &bit);
if (!byte)
return -1;
return (*byte >> bit) & 1;
}
EXPORT_SYMBOL(try_test_sas_gpio_gp_bit);
static int sas_host_smp_write_gpio(struct sas_ha_struct *sas_ha, u8 *resp_data,
u8 reg_type, u8 reg_index, u8 reg_count,
u8 *req_data)
{
struct sas_internal *i = to_sas_internal(sas_ha->core.shost->transportt);
int written;
if (i->dft->lldd_write_gpio == NULL) {
resp_data[2] = SMP_RESP_FUNC_UNK;
return 0;
}
written = i->dft->lldd_write_gpio(sas_ha, reg_type, reg_index,
reg_count, req_data);
if (written < 0) {
resp_data[2] = SMP_RESP_FUNC_FAILED;
written = 0;
} else
resp_data[2] = SMP_RESP_FUNC_ACC;
return written;
}
static void sas_report_phy_sata(struct sas_ha_struct *sas_ha, u8 *resp_data,
u8 phy_id)
{
struct sas_rphy *rphy;
struct dev_to_host_fis *fis;
int i;
if (phy_id >= sas_ha->num_phys) {
resp_data[2] = SMP_RESP_NO_PHY;
return;
}
resp_data[2] = SMP_RESP_PHY_NO_SATA;
if (!sas_ha->sas_phy[phy_id]->port)
return;
rphy = sas_ha->sas_phy[phy_id]->port->port_dev->rphy;
fis = (struct dev_to_host_fis *)
sas_ha->sas_phy[phy_id]->port->port_dev->frame_rcvd;
if (rphy->identify.target_port_protocols != SAS_PROTOCOL_SATA)
return;
resp_data[2] = SMP_RESP_FUNC_ACC;
resp_data[9] = phy_id;
memcpy(resp_data + 16, sas_ha->sas_phy[phy_id]->attached_sas_addr,
SAS_ADDR_SIZE);
/* check to see if we have a valid d2h fis */
if (fis->fis_type != 0x34)
return;
/* the d2h fis is required by the standard to be in LE format */
for (i = 0; i < 20; i += 4) {
u8 *dst = resp_data + 24 + i, *src =
&sas_ha->sas_phy[phy_id]->port->port_dev->frame_rcvd[i];
dst[0] = src[3];
dst[1] = src[2];
dst[2] = src[1];
dst[3] = src[0];
}
}
static void sas_phy_control(struct sas_ha_struct *sas_ha, u8 phy_id,
u8 phy_op, enum sas_linkrate min,
enum sas_linkrate max, u8 *resp_data)
{
struct sas_internal *i =
to_sas_internal(sas_ha->core.shost->transportt);
struct sas_phy_linkrates rates;
struct asd_sas_phy *asd_phy;
if (phy_id >= sas_ha->num_phys) {
resp_data[2] = SMP_RESP_NO_PHY;
return;
}
asd_phy = sas_ha->sas_phy[phy_id];
switch (phy_op) {
case PHY_FUNC_NOP:
case PHY_FUNC_LINK_RESET:
case PHY_FUNC_HARD_RESET:
case PHY_FUNC_DISABLE:
case PHY_FUNC_CLEAR_ERROR_LOG:
case PHY_FUNC_CLEAR_AFFIL:
case PHY_FUNC_TX_SATA_PS_SIGNAL:
break;
default:
resp_data[2] = SMP_RESP_PHY_UNK_OP;
return;
}
rates.minimum_linkrate = min;
rates.maximum_linkrate = max;
/* filter reset requests through libata eh */
if (phy_op == PHY_FUNC_LINK_RESET && sas_try_ata_reset(asd_phy) == 0) {
resp_data[2] = SMP_RESP_FUNC_ACC;
return;
}
if (i->dft->lldd_control_phy(asd_phy, phy_op, &rates))
resp_data[2] = SMP_RESP_FUNC_FAILED;
else
resp_data[2] = SMP_RESP_FUNC_ACC;
}
int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req,
struct request *rsp)
{
u8 *req_data = NULL, *resp_data = NULL, *buf;
struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
int error = -EINVAL;
/* eight is the minimum size for request and response frames */
if (blk_rq_bytes(req) < 8 || blk_rq_bytes(rsp) < 8)
goto out;
if (bio_offset(req->bio) + blk_rq_bytes(req) > PAGE_SIZE ||
bio_offset(rsp->bio) + blk_rq_bytes(rsp) > PAGE_SIZE) {
shost_printk(KERN_ERR, shost,
"SMP request/response frame crosses page boundary");
goto out;
}
req_data = kzalloc(blk_rq_bytes(req), GFP_KERNEL);
/* make sure frame can always be built ... we copy
* back only the requested length */
resp_data = kzalloc(max(blk_rq_bytes(rsp), 128U), GFP_KERNEL);
if (!req_data || !resp_data) {
error = -ENOMEM;
goto out;
}
local_irq_disable();
buf = kmap_atomic(bio_page(req->bio), KM_USER0) + bio_offset(req->bio);
memcpy(req_data, buf, blk_rq_bytes(req));
kunmap_atomic(buf - bio_offset(req->bio), KM_USER0);
local_irq_enable();
if (req_data[0] != SMP_REQUEST)
goto out;
/* always succeeds ... even if we can't process the request
* the result is in the response frame */
error = 0;
/* set up default don't know response */
resp_data[0] = SMP_RESPONSE;
resp_data[1] = req_data[1];
resp_data[2] = SMP_RESP_FUNC_UNK;
switch (req_data[1]) {
case SMP_REPORT_GENERAL:
req->resid_len -= 8;
rsp->resid_len -= 32;
resp_data[2] = SMP_RESP_FUNC_ACC;
resp_data[9] = sas_ha->num_phys;
break;
case SMP_REPORT_MANUF_INFO:
req->resid_len -= 8;
rsp->resid_len -= 64;
resp_data[2] = SMP_RESP_FUNC_ACC;
memcpy(resp_data + 12, shost->hostt->name,
SAS_EXPANDER_VENDOR_ID_LEN);
memcpy(resp_data + 20, "libsas virt phy",
SAS_EXPANDER_PRODUCT_ID_LEN);
break;
case SMP_READ_GPIO_REG:
/* FIXME: need GPIO support in the transport class */
break;
case SMP_DISCOVER:
req->resid_len -= 16;
if ((int)req->resid_len < 0) {
req->resid_len = 0;
error = -EINVAL;
goto out;
}
rsp->resid_len -= 56;
sas_host_smp_discover(sas_ha, resp_data, req_data[9]);
break;
case SMP_REPORT_PHY_ERR_LOG:
/* FIXME: could implement this with additional
* libsas callbacks providing the HW supports it */
break;
case SMP_REPORT_PHY_SATA:
req->resid_len -= 16;
if ((int)req->resid_len < 0) {
req->resid_len = 0;
error = -EINVAL;
goto out;
}
rsp->resid_len -= 60;
sas_report_phy_sata(sas_ha, resp_data, req_data[9]);
break;
case SMP_REPORT_ROUTE_INFO:
/* Can't implement; hosts have no routes */
break;
case SMP_WRITE_GPIO_REG: {
/* SFF-8485 v0.7 */
const int base_frame_size = 11;
int to_write = req_data[4];
if (blk_rq_bytes(req) < base_frame_size + to_write * 4 ||
req->resid_len < base_frame_size + to_write * 4) {
resp_data[2] = SMP_RESP_INV_FRM_LEN;
break;
}
to_write = sas_host_smp_write_gpio(sas_ha, resp_data, req_data[2],
req_data[3], to_write, &req_data[8]);
req->resid_len -= base_frame_size + to_write * 4;
rsp->resid_len -= 8;
break;
}
case SMP_CONF_ROUTE_INFO:
/* Can't implement; hosts have no routes */
break;
case SMP_PHY_CONTROL:
req->resid_len -= 44;
if ((int)req->resid_len < 0) {
req->resid_len = 0;
error = -EINVAL;
goto out;
}
rsp->resid_len -= 8;
sas_phy_control(sas_ha, req_data[9], req_data[10],
req_data[32] >> 4, req_data[33] >> 4,
resp_data);
break;
case SMP_PHY_TEST_FUNCTION:
/* FIXME: should this be implemented? */
break;
default:
/* probably a 2.0 function */
break;
}
local_irq_disable();
buf = kmap_atomic(bio_page(rsp->bio), KM_USER0) + bio_offset(rsp->bio);
memcpy(buf, resp_data, blk_rq_bytes(rsp));
flush_kernel_dcache_page(bio_page(rsp->bio));
kunmap_atomic(buf - bio_offset(rsp->bio), KM_USER0);
local_irq_enable();
out:
kfree(req_data);
kfree(resp_data);
return error;
}