| /* |
| * linux/include/asm-arm/arch-sa1100/simpad.h |
| * |
| * based of assabet.h same as HUW_Webpanel |
| * |
| * This file contains the hardware specific definitions for SIMpad |
| * |
| * 2001/05/14 Juergen Messerer <juergen.messerer@siemens.ch> |
| */ |
| |
| #ifndef SIMPAD_H |
| #define SIMPAD_H |
| |
| |
| #ifndef __ASM_ARCH_HARDWARE_H |
| #error "include <asm/hardware.h> instead" |
| #endif |
| |
| #define GPIO_UART1_RTS GPIO_GPIO14 |
| #define GPIO_UART1_DTR GPIO_GPIO7 |
| #define GPIO_UART1_CTS GPIO_GPIO8 |
| #define GPIO_UART1_DCD GPIO_GPIO23 |
| #define GPIO_UART1_DSR GPIO_GPIO6 |
| |
| #define GPIO_UART3_RTS GPIO_GPIO12 |
| #define GPIO_UART3_DTR GPIO_GPIO16 |
| #define GPIO_UART3_CTS GPIO_GPIO13 |
| #define GPIO_UART3_DCD GPIO_GPIO18 |
| #define GPIO_UART3_DSR GPIO_GPIO17 |
| |
| #define GPIO_UCB1300_IRQ GPIO_GPIO (22) /* UCB GPIO and touchscreen */ |
| |
| #define IRQ_UART1_CTS IRQ_GPIO15 |
| #define IRQ_UART1_DCD GPIO_GPIO23 |
| #define IRQ_UART1_DSR GPIO_GPIO6 |
| #define IRQ_UART3_CTS GPIO_GPIO13 |
| #define IRQ_UART3_DCD GPIO_GPIO18 |
| #define IRQ_UART3_DSR GPIO_GPIO17 |
| |
| #define IRQ_GPIO_UCB1300_IRQ IRQ_GPIO22 |
| |
| |
| /*--- PCMCIA ---*/ |
| #define GPIO_CF_CD GPIO_GPIO24 |
| #define GPIO_CF_IRQ GPIO_GPIO1 |
| #define IRQ_GPIO_CF_IRQ IRQ_GPIO1 |
| #define IRQ_GPIO_CF_CD IRQ_GPIO24 |
| |
| // CS3 Latch is write only, a shadow is neccessary |
| |
| #define CS3BUSTYPE unsigned volatile long |
| #define CS3_BASE 0xf1000000 |
| |
| #define VCC_5V_EN 0x0001 // For 5V PCMCIA |
| #define VCC_3V_EN 0x0002 // FOR 3.3V PCMCIA |
| #define EN1 0x0004 // This is only for EPROM's |
| #define EN0 0x0008 // Both should be enable for 3.3V or 5V |
| #define DISPLAY_ON 0x0010 |
| #define PCMCIA_BUFF_DIS 0x0020 |
| #define MQ_RESET 0x0040 |
| #define PCMCIA_RESET 0x0080 |
| #define DECT_POWER_ON 0x0100 |
| #define IRDA_SD 0x0200 // Shutdown for powersave |
| #define RS232_ON 0x0400 |
| #define SD_MEDIAQ 0x0800 // Shutdown for powersave |
| #define LED2_ON 0x1000 |
| #define IRDA_MODE 0x2000 // Fast/Slow IrDA mode |
| #define ENABLE_5V 0x4000 // Enable 5V circuit |
| #define RESET_SIMCARD 0x8000 |
| |
| #define RS232_ENABLE 0x0440 |
| #define PCMCIAMASK 0x402f |
| |
| #endif // SIMPAD_H |
| |
| |
| |
| |
| |
| |
| |
| |
