blob: c6bd107ab87062f4d4ed5be2cd7aa27e4de20fb3 [file] [log] [blame]
/*
*
* drivers/scsi/pc980155.c
*
* PC-9801-55 SCSI host adapter driver
*
* Copyright (C) 1997-2003 Kyoto University Microcomputer Club
* (Linux/98 project)
* Tomoharu Ugawa <ohirune@kmc.gr.jp>
*
*/
#include <linux/module.h>
#include <linux/blk.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/types.h>
#include <linux/delay.h>
#include <asm/dma.h>
#include "scsi.h"
#include "hosts.h"
#include "wd33c93.h"
#include "pc980155.h"
extern int pc98_bios_param(struct scsi_device *, struct block_device *,
sector_t, int *);
static int scsi_pc980155_detect(Scsi_Host_Template *);
static int scsi_pc980155_release(struct Scsi_Host *);
#ifndef CMD_PER_LUN
#define CMD_PER_LUN 2
#endif
#ifndef CAN_QUEUE
#define CAN_QUEUE 16
#endif
#undef PC_9801_55_DEBUG
#undef PC_9801_55_DEBUG_VERBOSE
#define NR_BASE_IOS 4
static int nr_base_ios = NR_BASE_IOS;
static unsigned int base_ios[NR_BASE_IOS] = {0xcc0, 0xcd0, 0xce0, 0xcf0};
static wd33c93_regs init_regs;
static int io;
static struct Scsi_Host *pc980155_host = NULL;
static void pc980155_intr_handle(int irq, void *dev_id, struct pt_regs *regp);
static inline void pc980155_dma_enable(unsigned int base_io)
{
outb(0x01, REG_CWRITE);
}
static inline void pc980155_dma_disable(unsigned int base_io)
{
outb(0x02, REG_CWRITE);
}
static void pc980155_intr_handle(int irq, void *dev_id, struct pt_regs *regp)
{
wd33c93_intr(pc980155_host);
}
static int dma_setup(Scsi_Cmnd *sc, int dir_in)
{
/*
* sc->SCp.this_residual : transfer count
* sc->SCp.ptr : distination address (virtual address)
* dir_in : data direction (DATA_OUT_DIR:0 or DATA_IN_DIR:1)
*
* if success return 0
*/
/*
* DMA WRITE MODE
* bit 7,6 01b single mode (this mode only)
* bit 5 inc/dec (default:0 = inc)
* bit 4 auto initialize (normaly:0 = off)
* bit 3,2 01b memory -> io
* 10b io -> memory
* 00b verify
* bit 1,0 channel
*/
disable_dma(sc->device->host->dma_channel);
set_dma_mode(sc->device->host->dma_channel,
0x40 | (dir_in ? 0x04 : 0x08));
clear_dma_ff(sc->device->host->dma_channel);
set_dma_addr(sc->device->host->dma_channel, virt_to_phys(sc->SCp.ptr));
set_dma_count(sc->device->host->dma_channel, sc->SCp.this_residual);
#ifdef PC_9801_55_DEBUG
printk("D%d(%x)D", sc->device->host->dma_channel,
sc->SCp.this_residual);
#endif
enable_dma(sc->device->host->dma_channel);
pc980155_dma_enable(sc->device->host->io_port);
return 0;
}
static void dma_stop(struct Scsi_Host *instance, Scsi_Cmnd *sc, int status)
{
/*
* instance: Hostadapter's instance
* sc: scsi command
* status: True if success
*/
pc980155_dma_disable(sc->device->host->io_port);
disable_dma(sc->device->host->dma_channel);
}
/* return non-zero on detection */
static inline int pc980155_test_port(wd33c93_regs regs)
{
/* Quick and dirty test for presence of the card. */
if (inb(regs.SASR) == 0xff)
return 0;
return 1;
}
static inline int pc980155_getconfig(unsigned int base_io, wd33c93_regs regs,
unsigned char* irq, unsigned char* dma,
unsigned char* scsi_id)
{
static unsigned char irqs[] = {3, 5, 6, 9, 12, 13};
unsigned char result;
printk(KERN_DEBUG "PC-9801-55: base_io=%x SASR=%x SCMD=%x\n",
base_io, regs.SASR, regs.SCMD);
result = read_pc980155_resetint(regs);
printk(KERN_DEBUG "PC-9801-55: getting config (%x)\n", result);
*scsi_id = result & 0x07;
*irq = (result >> 3) & 0x07;
if (*irq > 5) {
printk(KERN_ERR "PC-9801-55 (base %#x): impossible IRQ (%d)"
" - other device here?\n", base_io, *irq);
return 0;
}
*irq = irqs[*irq];
result = inb(REG_STATRD);
*dma = result & 0x03;
if (*dma == 1) {
printk(KERN_ERR
"PC-9801-55 (base %#x): impossible DMA channl (%d)"
" - other device here?\n", base_io, *dma);
return 0;
}
#ifdef PC_9801_55_DEBUG
printk("PC-9801-55: end of getconfig\n");
#endif
return 1;
}
/* return non-zero on detection */
static int scsi_pc980155_detect(Scsi_Host_Template* tpnt)
{
unsigned int base_io;
unsigned char irq, dma, scsi_id;
int i;
#ifdef PC_9801_55_DEBUG
unsigned char debug;
#endif
if (io) {
base_ios[0] = io;
nr_base_ios = 1;
}
for (i = 0; i < nr_base_ios; i++) {
base_io = base_ios[i];
init_regs.SASR = REG_ADDRST;
init_regs.SCMD = REG_CONTRL;
#ifdef PC_9801_55_DEBUG
printk("PC-9801-55: SASR(%x = %x)\n", SASR, REG_ADDRST);
#endif
if (!request_region(base_io, 6, "PC-9801-55"))
continue;
if (pc980155_test_port(init_regs) &&
pc980155_getconfig(base_io, init_regs,
&irq, &dma, &scsi_id))
goto found;
release_region(base_io, 6);
}
printk("PC-9801-55: not found\n");
return 0;
found:
#ifdef PC_9801_55_DEBUG
printk("PC-9801-55: config: base io = %x, irq = %d, dma channel = %d, scsi id = %d\n", base_io, irq, dma, scsi_id);
#endif
if (request_irq(irq, pc980155_intr_handle, 0, "PC-9801-55", NULL)) {
printk(KERN_ERR "PC-9801-55: unable to allocate IRQ %d\n", irq);
goto err1;
}
if (request_dma(dma, "PC-9801-55")) {
printk(KERN_ERR "PC-9801-55: unable to allocate DMA channel %d\n", dma);
goto err2;
}
pc980155_host = scsi_register(tpnt, sizeof(struct WD33C93_hostdata));
if (pc980155_host) {
pc980155_host->this_id = scsi_id;
pc980155_host->io_port = base_io;
pc980155_host->n_io_port = 6;
pc980155_host->irq = irq;
pc980155_host->dma_channel = dma;
printk("PC-9801-55: scsi host found at %x irq = %d, use dma channel %d.\n", base_io, irq, dma);
pc980155_int_enable(init_regs);
wd33c93_init(pc980155_host, init_regs, dma_setup, dma_stop,
WD33C93_FS_12_15);
return 1;
}
printk(KERN_ERR "PC-9801-55: failed to register device\n");
err2:
free_irq(irq, NULL);
err1:
release_region(base_io, 6);
return 0;
}
static int scsi_pc980155_release(struct Scsi_Host *shost)
{
struct WD33C93_hostdata *hostdata
= (struct WD33C93_hostdata *)shost->hostdata;
pc980155_int_disable(hostdata->regs);
release_region(shost->io_port, shost->n_io_port);
free_irq(shost->irq, NULL);
free_dma(shost->dma_channel);
wd33c93_release();
return 1;
}
static int pc980155_bus_reset(Scsi_Cmnd *cmd)
{
struct WD33C93_hostdata *hostdata
= (struct WD33C93_hostdata *)cmd->device->host->hostdata;
pc980155_int_disable(hostdata->regs);
pc980155_assert_bus_reset(hostdata->regs);
udelay(50);
pc980155_negate_bus_reset(hostdata->regs);
(void) inb(hostdata->regs.SASR);
(void) read_pc980155(hostdata->regs, WD_SCSI_STATUS);
pc980155_int_enable(hostdata->regs);
wd33c93_host_reset(cmd);
return SUCCESS;
}
#ifndef MODULE
static int __init pc980155_setup(char *str)
{
int ints[4];
str = get_options(str, ARRAY_SIZE(ints), ints);
if (ints[0] > 0)
io = ints[1];
return 1;
}
__setup("pc980155_io=", pc980155_setup);
#endif
MODULE_PARM(io, "i");
MODULE_AUTHOR("Tomoharu Ugawa <ohirune@kmc.gr.jp>");
MODULE_DESCRIPTION("PC-9801-55 SCSI host adapter driver");
MODULE_LICENSE("GPL");
static Scsi_Host_Template driver_template = {
.proc_info = wd33c93_proc_info,
.name = "SCSI PC-9801-55",
.detect = scsi_pc980155_detect,
.release = scsi_pc980155_release,
.queuecommand = wd33c93_queuecommand,
.eh_abort_handler = wd33c93_abort,
.eh_bus_reset_handler = pc980155_bus_reset,
.eh_host_reset_handler = wd33c93_host_reset,
.bios_param = pc98_bios_param,
.can_queue = CAN_QUEUE,
.this_id = 7,
.sg_tablesize = SG_ALL,
.cmd_per_lun = CMD_PER_LUN, /* dont use link command */
.unchecked_isa_dma = 1, /* use dma **XXXX***/
.use_clustering = ENABLE_CLUSTERING,
.proc_name = "PC_9801_55",
};
#include "scsi_module.c"