blob: 49df0053347ada4e808403bb5630e2427dc1b98b [file] [log] [blame]
* Allwinner P2WI (Push/Pull 2 Wire Interface) controller
Required properties :
- reg : Offset and length of the register set for the device.
- compatible : Should one of the following:
- "allwinner,sun6i-a31-p2wi"
- interrupts : The interrupt line connected to the P2WI peripheral.
- clocks : The gate clk connected to the P2WI peripheral.
- resets : The reset line connected to the P2WI peripheral.
Optional properties :
- clock-frequency : Desired P2WI bus clock frequency in Hz. If not set the
default frequency is 100kHz
A P2WI may contain one child node encoding a P2WI slave device.
Slave device properties:
Required properties:
- reg : the I2C slave address used during the initialization
process to switch from I2C to P2WI mode
Example:
p2wi@1f03400 {
compatible = "allwinner,sun6i-a31-p2wi";
reg = <0x01f03400 0x400>;
interrupts = <0 39 4>;
clocks = <&apb0_gates 3>;
clock-frequency = <6000000>;
resets = <&apb0_rst 3>;
axp221: pmic@68 {
compatible = "x-powers,axp221";
reg = <0x68>;
/* ... */
};
};