blob: 6adba9058b22b649d772381ae24634c1d8a0f940 [file] [log] [blame]
What: /sys/bus/iio/devices/iio:deviceX/in_intensityY_raw
Date: May 2016
KernelVersion:
Contact: Andrew F. Davis <afd@ti.com>
Description:
Get measured values from the ADC for these stages. Y is the
specific stage number corresponding to datasheet stage names
as follows:
1 -> LED2
2 -> ALED2/LED3
3 -> LED1
4 -> ALED1/LED4
Note that channels 5 and 6 represent LED2-ALED2 and LED1-ALED1
respectively which simply helper channels containing the
calculated difference in the value of stage 1 - 2 and 3 - 4.
The values are expressed in 24-bit twos complement.
What: /sys/bus/iio/devices/iio:deviceX/in_intensityY_offset
Date: May 2016
KernelVersion:
Contact: Andrew F. Davis <afd@ti.com>
Description:
Get and set the offset cancellation DAC setting for these
stages. The values are expressed in 5-bit sign-magnitude.
What: /sys/bus/iio/devices/iio:deviceX/in_intensityY_resistance
What: /sys/bus/iio/devices/iio:deviceX/in_intensityY_capacitance
Date: May 2016
KernelVersion:
Contact: Andrew F. Davis <afd@ti.com>
Description:
Get and set the resistance and the capacitance settings for the
Transimpedance Amplifier during the associated stage.
What: /sys/bus/iio/devices/iio:deviceX/out_currentY_raw
Date: May 2016
KernelVersion:
Contact: Andrew F. Davis <afd@ti.com>
Description:
Get and set the LED current for the specified LED active during
this stage. Y is the specific stage number.