Merge tag 'usb-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB updates from Greg KH:
 "Here's the big USB driver update for 4.8-rc1.  Lots of the normal
  stuff in here, musb, gadget, xhci, and other updates and fixes.  All
  of the details are in the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits)
  cdc-acm: beautify probe()
  cdc-wdm: use the common CDC parser
  cdc-acm: cleanup error handling
  cdc-acm: use the common parser
  usbnet: move the CDC parser into USB core
  usb: musb: sunxi: Simplify dr_mode handling
  usb: musb: sunxi: make unexported symbols static
  usb: musb: cppi41: add dma channel tracepoints
  usb: musb: cppi41: move struct cppi41_dma_channel to header
  usb: musb: cleanup cppi_dma header
  usb: musb: gadget: add usb-request tracepoints
  usb: musb: host: add urb tracepoints
  usb: musb: add tracepoints to dump interrupt events
  usb: musb: add tracepoints for register access
  usb: musb: dsps: use musb register read/write wrappers instead
  usb: musb: switch dev_dbg to tracepoints
  usb: musb: add tracepoints support for debugging
  usb: quirks: Add no-lpm quirk for Elan
  phy: rcar-gen3-usb2: fix mutex_lock calling in interrupt
  phy: rockhip-usb: use devm_add_action_or_reset()
  ...
diff --git a/Documentation/devicetree/bindings/phy/phy-da8xx-usb.txt b/Documentation/devicetree/bindings/phy/phy-da8xx-usb.txt
new file mode 100644
index 0000000..c26478b
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-da8xx-usb.txt
@@ -0,0 +1,40 @@
+TI DA8xx/OMAP-L1xx/AM18xx USB PHY
+
+Required properties:
+ - compatible: must be "ti,da830-usb-phy".
+ - #phy-cells: must be 1.
+
+This device controls the PHY for both the USB 1.1 OHCI and USB 2.0 OTG
+controllers on DA8xx SoCs. Consumers of this device should use index 0 for
+the USB 2.0 phy device and index 1 for the USB 1.1 phy device.
+
+It also requires a "syscon" node with compatible = "ti,da830-cfgchip", "syscon"
+to access the CFGCHIP2 register.
+
+Example:
+
+	cfgchip: cfgchip@1417c {
+		compatible = "ti,da830-cfgchip", "syscon";
+		reg = <0x1417c 0x14>;
+	};
+
+	usb_phy: usb-phy {
+		compatible = "ti,da830-usb-phy";
+		#phy-cells = <1>;
+	};
+
+	usb20: usb@200000 {
+		compatible = "ti,da830-musb";
+		reg = <0x200000 0x1000>;
+		interrupts = <58>;
+		phys = <&usb_phy 0>;
+		phy-names = "usb-phy";
+	};
+
+	usb11: usb@225000 {
+		compatible = "ti,da830-ohci";
+		reg = <0x225000 0x1000>;
+		interrupts = <59>;
+		phys = <&usb_phy 1>;
+		phy-names = "usb-phy";
+	};
diff --git a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
index 68498d5..cc6be96 100644
--- a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
+++ b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
@@ -5,11 +5,13 @@
      "rockchip,rk3066a-usb-phy"
      "rockchip,rk3188-usb-phy"
      "rockchip,rk3288-usb-phy"
- - rockchip,grf : phandle to the syscon managing the "general
-   register files"
  - #address-cells: should be 1
  - #size-cells: should be 0
 
+Deprecated properties:
+ - rockchip,grf : phandle to the syscon managing the "general
+   register files" - phy should be a child of the GRF instead
+
 Sub-nodes:
 Each PHY should be represented as a sub-node.
 
@@ -28,14 +30,19 @@
 
 Example:
 
-usbphy: phy {
-	compatible = "rockchip,rk3288-usb-phy";
-	rockchip,grf = <&grf>;
-	#address-cells = <1>;
-	#size-cells = <0>;
+grf: syscon@ff770000 {
+	compatible = "rockchip,rk3288-grf", "syscon", "simple-mfd";
 
-	usbphy0: usb-phy0 {
-		#phy-cells = <0>;
-		reg = <0x320>;
+...
+
+	usbphy: phy {
+		compatible = "rockchip,rk3288-usb-phy";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usbphy0: usb-phy0 {
+			#phy-cells = <0>;
+			reg = <0x320>;
+		};
 	};
 };
diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
index 1084e2b..341dc67 100644
--- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
+++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
@@ -93,7 +93,7 @@
 		phys = <&usb_phy0>;
 		phy-names = "usb-phy";
 		vbus-supply = <&reg_usb0_vbus>;
-		gadget-itc-setting = <0x4>; /* 4 micro-frames */
+		itc-setting = <0x4>; /* 4 micro-frames */
 		 /* Incremental burst of unspecified length */
 		ahb-burst-config = <0x0>;
 		tx-burst-size-dword = <0x10>; /* 64 bytes */
diff --git a/Documentation/devicetree/bindings/usb/usb-ohci.txt b/Documentation/devicetree/bindings/usb/usb-ohci.txt
index 19233b7..9df4569 100644
--- a/Documentation/devicetree/bindings/usb/usb-ohci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-ohci.txt
@@ -14,7 +14,7 @@
 - clocks : a list of phandle + clock specifier pairs
 - phys : phandle + phy specifier pair
 - phy-names : "usb"
-- resets : phandle + reset specifier pair
+- resets : a list of phandle + reset specifier pairs
 
 Example:
 
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 2827e7a..5dd2734 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -232,7 +232,7 @@
 		};
 
 		usb1: ohci@00400000 {
-			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			compatible = "atmel,sama5d2-ohci", "usb-ohci";
 			reg = <0x00400000 0x100000>;
 			interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
 			clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index 6086a01..3bfb592 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -42,7 +42,6 @@
 #include <linux/mii.h>
 #include <linux/usb.h>
 #include <linux/usb/usbnet.h>
-#include <linux/usb/cdc.h>
 #include <linux/slab.h>
 #include <linux/kernel.h>
 #include <linux/pm_runtime.h>
@@ -1972,143 +1971,6 @@
 	return err;
 }
 
-int cdc_parse_cdc_header(struct usb_cdc_parsed_header *hdr,
-				struct usb_interface *intf,
-				u8 *buffer,
-				int buflen)
-{
-	/* duplicates are ignored */
-	struct usb_cdc_union_desc *union_header = NULL;
-
-	/* duplicates are not tolerated */
-	struct usb_cdc_header_desc *header = NULL;
-	struct usb_cdc_ether_desc *ether = NULL;
-	struct usb_cdc_mdlm_detail_desc *detail = NULL;
-	struct usb_cdc_mdlm_desc *desc = NULL;
-
-	unsigned int elength;
-	int cnt = 0;
-
-	memset(hdr, 0x00, sizeof(struct usb_cdc_parsed_header));
-	hdr->phonet_magic_present = false;
-	while (buflen > 0) {
-		elength = buffer[0];
-		if (!elength) {
-			dev_err(&intf->dev, "skipping garbage byte\n");
-			elength = 1;
-			goto next_desc;
-		}
-		if (buffer[1] != USB_DT_CS_INTERFACE) {
-			dev_err(&intf->dev, "skipping garbage\n");
-			goto next_desc;
-		}
-
-		switch (buffer[2]) {
-		case USB_CDC_UNION_TYPE: /* we've found it */
-			if (elength < sizeof(struct usb_cdc_union_desc))
-				goto next_desc;
-			if (union_header) {
-				dev_err(&intf->dev, "More than one union descriptor, skipping ...\n");
-				goto next_desc;
-			}
-			union_header = (struct usb_cdc_union_desc *)buffer;
-			break;
-		case USB_CDC_COUNTRY_TYPE:
-			if (elength < sizeof(struct usb_cdc_country_functional_desc))
-				goto next_desc;
-			hdr->usb_cdc_country_functional_desc =
-				(struct usb_cdc_country_functional_desc *)buffer;
-			break;
-		case USB_CDC_HEADER_TYPE:
-			if (elength != sizeof(struct usb_cdc_header_desc))
-				goto next_desc;
-			if (header)
-				return -EINVAL;
-			header = (struct usb_cdc_header_desc *)buffer;
-			break;
-		case USB_CDC_ACM_TYPE:
-			if (elength < sizeof(struct usb_cdc_acm_descriptor))
-				goto next_desc;
-			hdr->usb_cdc_acm_descriptor =
-				(struct usb_cdc_acm_descriptor *)buffer;
-			break;
-		case USB_CDC_ETHERNET_TYPE:
-			if (elength != sizeof(struct usb_cdc_ether_desc))
-				goto next_desc;
-			if (ether)
-				return -EINVAL;
-			ether = (struct usb_cdc_ether_desc *)buffer;
-			break;
-		case USB_CDC_CALL_MANAGEMENT_TYPE:
-			if (elength < sizeof(struct usb_cdc_call_mgmt_descriptor))
-				goto next_desc;
-			hdr->usb_cdc_call_mgmt_descriptor =
-				(struct usb_cdc_call_mgmt_descriptor *)buffer;
-			break;
-		case USB_CDC_DMM_TYPE:
-			if (elength < sizeof(struct usb_cdc_dmm_desc))
-				goto next_desc;
-			hdr->usb_cdc_dmm_desc =
-				(struct usb_cdc_dmm_desc *)buffer;
-			break;
-		case USB_CDC_MDLM_TYPE:
-			if (elength < sizeof(struct usb_cdc_mdlm_desc *))
-				goto next_desc;
-			if (desc)
-				return -EINVAL;
-			desc = (struct usb_cdc_mdlm_desc *)buffer;
-			break;
-		case USB_CDC_MDLM_DETAIL_TYPE:
-			if (elength < sizeof(struct usb_cdc_mdlm_detail_desc *))
-				goto next_desc;
-			if (detail)
-				return -EINVAL;
-			detail = (struct usb_cdc_mdlm_detail_desc *)buffer;
-			break;
-		case USB_CDC_NCM_TYPE:
-			if (elength < sizeof(struct usb_cdc_ncm_desc))
-				goto next_desc;
-			hdr->usb_cdc_ncm_desc = (struct usb_cdc_ncm_desc *)buffer;
-			break;
-		case USB_CDC_MBIM_TYPE:
-			if (elength < sizeof(struct usb_cdc_mbim_desc))
-				goto next_desc;
-
-			hdr->usb_cdc_mbim_desc = (struct usb_cdc_mbim_desc *)buffer;
-			break;
-		case USB_CDC_MBIM_EXTENDED_TYPE:
-			if (elength < sizeof(struct usb_cdc_mbim_extended_desc))
-				break;
-			hdr->usb_cdc_mbim_extended_desc =
-				(struct usb_cdc_mbim_extended_desc *)buffer;
-			break;
-		case CDC_PHONET_MAGIC_NUMBER:
-			hdr->phonet_magic_present = true;
-			break;
-		default:
-			/*
-			 * there are LOTS more CDC descriptors that
-			 * could legitimately be found here.
-			 */
-			dev_dbg(&intf->dev, "Ignoring descriptor: type %02x, length %ud\n",
-					buffer[2], elength);
-			goto next_desc;
-		}
-		cnt++;
-next_desc:
-		buflen -= elength;
-		buffer += elength;
-	}
-	hdr->usb_cdc_union_desc = union_header;
-	hdr->usb_cdc_header_desc = header;
-	hdr->usb_cdc_mdlm_detail_desc = detail;
-	hdr->usb_cdc_mdlm_desc = desc;
-	hdr->usb_cdc_ether_desc = ether;
-	return cnt;
-}
-
-EXPORT_SYMBOL(cdc_parse_cdc_header);
-
 /*
  * The function can't be called inside suspend/resume callback,
  * otherwise deadlock will be caused.
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index b869b98..cc0b695 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -44,6 +44,16 @@
 	depends on OF && HAS_IOMEM
 	select GENERIC_PHY
 
+config PHY_DA8XX_USB
+	tristate "TI DA8xx USB PHY Driver"
+	depends on ARCH_DAVINCI_DA8XX
+	select GENERIC_PHY
+	select MFD_SYSCON
+	help
+	  Enable this to support the USB PHY on DA8xx SoCs.
+
+	  This driver controls both the USB 1.1 PHY and the USB 2.0 PHY.
+
 config PHY_DM816X_USB
 	tristate "TI dm816x USB PHY driver"
 	depends on ARCH_OMAP2PLUS
@@ -176,6 +186,7 @@
 	tristate "TWL4030 USB Transceiver Driver"
 	depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
 	depends on USB_SUPPORT
+	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't 'y'
 	select GENERIC_PHY
 	select USB_PHY
 	help
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 9c3e73c..fa8480e 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -6,6 +6,7 @@
 obj-$(CONFIG_PHY_BCM_NS_USB2)		+= phy-bcm-ns-usb2.o
 obj-$(CONFIG_PHY_BERLIN_USB)		+= phy-berlin-usb.o
 obj-$(CONFIG_PHY_BERLIN_SATA)		+= phy-berlin-sata.o
+obj-$(CONFIG_PHY_DA8XX_USB)		+= phy-da8xx-usb.o
 obj-$(CONFIG_PHY_DM816X_USB)		+= phy-dm816x-usb.o
 obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY)	+= phy-armada375-usb2.o
 obj-$(CONFIG_BCM_KONA_USB2_PHY)		+= phy-bcm-kona-usb2.o
diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
index b72e9a3..8eca906 100644
--- a/drivers/phy/phy-core.c
+++ b/drivers/phy/phy-core.c
@@ -342,6 +342,21 @@
 }
 EXPORT_SYMBOL_GPL(phy_power_off);
 
+int phy_set_mode(struct phy *phy, enum phy_mode mode)
+{
+	int ret;
+
+	if (!phy || !phy->ops->set_mode)
+		return 0;
+
+	mutex_lock(&phy->mutex);
+	ret = phy->ops->set_mode(phy, mode);
+	mutex_unlock(&phy->mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(phy_set_mode);
+
 /**
  * _of_phy_get() - lookup and obtain a reference to a phy by phandle
  * @np: device_node for which to get the phy
diff --git a/drivers/phy/phy-da8xx-usb.c b/drivers/phy/phy-da8xx-usb.c
new file mode 100644
index 0000000..b2e59b6
--- /dev/null
+++ b/drivers/phy/phy-da8xx-usb.c
@@ -0,0 +1,245 @@
+/*
+ * phy-da8xx-usb - TI DaVinci DA8xx USB PHY driver
+ *
+ * Copyright (C) 2016 David Lechner <david@lechnology.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/mfd/da8xx-cfgchip.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+struct da8xx_usb_phy {
+	struct phy_provider	*phy_provider;
+	struct phy		*usb11_phy;
+	struct phy		*usb20_phy;
+	struct clk		*usb11_clk;
+	struct clk		*usb20_clk;
+	struct regmap		*regmap;
+};
+
+static int da8xx_usb11_phy_power_on(struct phy *phy)
+{
+	struct da8xx_usb_phy *d_phy = phy_get_drvdata(phy);
+	int ret;
+
+	ret = clk_prepare_enable(d_phy->usb11_clk);
+	if (ret)
+		return ret;
+
+	regmap_write_bits(d_phy->regmap, CFGCHIP(2), CFGCHIP2_USB1SUSPENDM,
+			  CFGCHIP2_USB1SUSPENDM);
+
+	return 0;
+}
+
+static int da8xx_usb11_phy_power_off(struct phy *phy)
+{
+	struct da8xx_usb_phy *d_phy = phy_get_drvdata(phy);
+
+	regmap_write_bits(d_phy->regmap, CFGCHIP(2), CFGCHIP2_USB1SUSPENDM, 0);
+
+	clk_disable_unprepare(d_phy->usb11_clk);
+
+	return 0;
+}
+
+static const struct phy_ops da8xx_usb11_phy_ops = {
+	.power_on	= da8xx_usb11_phy_power_on,
+	.power_off	= da8xx_usb11_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static int da8xx_usb20_phy_power_on(struct phy *phy)
+{
+	struct da8xx_usb_phy *d_phy = phy_get_drvdata(phy);
+	int ret;
+
+	ret = clk_prepare_enable(d_phy->usb20_clk);
+	if (ret)
+		return ret;
+
+	regmap_write_bits(d_phy->regmap, CFGCHIP(2), CFGCHIP2_OTGPWRDN, 0);
+
+	return 0;
+}
+
+static int da8xx_usb20_phy_power_off(struct phy *phy)
+{
+	struct da8xx_usb_phy *d_phy = phy_get_drvdata(phy);
+
+	regmap_write_bits(d_phy->regmap, CFGCHIP(2), CFGCHIP2_OTGPWRDN,
+			  CFGCHIP2_OTGPWRDN);
+
+	clk_disable_unprepare(d_phy->usb20_clk);
+
+	return 0;
+}
+
+static int da8xx_usb20_phy_set_mode(struct phy *phy, enum phy_mode mode)
+{
+	struct da8xx_usb_phy *d_phy = phy_get_drvdata(phy);
+	u32 val;
+
+	switch (mode) {
+	case PHY_MODE_USB_HOST:		/* Force VBUS valid, ID = 0 */
+		val = CFGCHIP2_OTGMODE_FORCE_HOST;
+		break;
+	case PHY_MODE_USB_DEVICE:	/* Force VBUS valid, ID = 1 */
+		val = CFGCHIP2_OTGMODE_FORCE_DEVICE;
+		break;
+	case PHY_MODE_USB_OTG:	/* Don't override the VBUS/ID comparators */
+		val = CFGCHIP2_OTGMODE_NO_OVERRIDE;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	regmap_write_bits(d_phy->regmap, CFGCHIP(2), CFGCHIP2_OTGMODE_MASK,
+			  val);
+
+	return 0;
+}
+
+static const struct phy_ops da8xx_usb20_phy_ops = {
+	.power_on	= da8xx_usb20_phy_power_on,
+	.power_off	= da8xx_usb20_phy_power_off,
+	.set_mode	= da8xx_usb20_phy_set_mode,
+	.owner		= THIS_MODULE,
+};
+
+static struct phy *da8xx_usb_phy_of_xlate(struct device *dev,
+					 struct of_phandle_args *args)
+{
+	struct da8xx_usb_phy *d_phy = dev_get_drvdata(dev);
+
+	if (!d_phy)
+		return ERR_PTR(-ENODEV);
+
+	switch (args->args[0]) {
+	case 0:
+		return d_phy->usb20_phy;
+	case 1:
+		return d_phy->usb11_phy;
+	default:
+		return ERR_PTR(-EINVAL);
+	}
+}
+
+static int da8xx_usb_phy_probe(struct platform_device *pdev)
+{
+	struct device		*dev = &pdev->dev;
+	struct device_node	*node = dev->of_node;
+	struct da8xx_usb_phy	*d_phy;
+
+	d_phy = devm_kzalloc(dev, sizeof(*d_phy), GFP_KERNEL);
+	if (!d_phy)
+		return -ENOMEM;
+
+	if (node)
+		d_phy->regmap = syscon_regmap_lookup_by_compatible(
+							"ti,da830-cfgchip");
+	else
+		d_phy->regmap = syscon_regmap_lookup_by_pdevname("syscon.0");
+	if (IS_ERR(d_phy->regmap)) {
+		dev_err(dev, "Failed to get syscon\n");
+		return PTR_ERR(d_phy->regmap);
+	}
+
+	d_phy->usb11_clk = devm_clk_get(dev, "usb11_phy");
+	if (IS_ERR(d_phy->usb11_clk)) {
+		dev_err(dev, "Failed to get usb11_phy clock\n");
+		return PTR_ERR(d_phy->usb11_clk);
+	}
+
+	d_phy->usb20_clk = devm_clk_get(dev, "usb20_phy");
+	if (IS_ERR(d_phy->usb20_clk)) {
+		dev_err(dev, "Failed to get usb20_phy clock\n");
+		return PTR_ERR(d_phy->usb20_clk);
+	}
+
+	d_phy->usb11_phy = devm_phy_create(dev, node, &da8xx_usb11_phy_ops);
+	if (IS_ERR(d_phy->usb11_phy)) {
+		dev_err(dev, "Failed to create usb11 phy\n");
+		return PTR_ERR(d_phy->usb11_phy);
+	}
+
+	d_phy->usb20_phy = devm_phy_create(dev, node, &da8xx_usb20_phy_ops);
+	if (IS_ERR(d_phy->usb20_phy)) {
+		dev_err(dev, "Failed to create usb20 phy\n");
+		return PTR_ERR(d_phy->usb20_phy);
+	}
+
+	platform_set_drvdata(pdev, d_phy);
+	phy_set_drvdata(d_phy->usb11_phy, d_phy);
+	phy_set_drvdata(d_phy->usb20_phy, d_phy);
+
+	if (node) {
+		d_phy->phy_provider = devm_of_phy_provider_register(dev,
+							da8xx_usb_phy_of_xlate);
+		if (IS_ERR(d_phy->phy_provider)) {
+			dev_err(dev, "Failed to create phy provider\n");
+			return PTR_ERR(d_phy->phy_provider);
+		}
+	} else {
+		int ret;
+
+		ret = phy_create_lookup(d_phy->usb11_phy, "usb-phy", "ohci.0");
+		if (ret)
+			dev_warn(dev, "Failed to create usb11 phy lookup\n");
+		ret = phy_create_lookup(d_phy->usb20_phy, "usb-phy",
+					"musb-da8xx");
+		if (ret)
+			dev_warn(dev, "Failed to create usb20 phy lookup\n");
+	}
+
+	return 0;
+}
+
+static int da8xx_usb_phy_remove(struct platform_device *pdev)
+{
+	struct da8xx_usb_phy *d_phy = platform_get_drvdata(pdev);
+
+	if (!pdev->dev.of_node) {
+		phy_remove_lookup(d_phy->usb20_phy, "usb-phy", "musb-da8xx");
+		phy_remove_lookup(d_phy->usb11_phy, "usb-phy", "ohci.0");
+	}
+
+	return 0;
+}
+
+static const struct of_device_id da8xx_usb_phy_ids[] = {
+	{ .compatible = "ti,da830-usb-phy" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, da8xx_usb_phy_ids);
+
+static struct platform_driver da8xx_usb_phy_driver = {
+	.probe	= da8xx_usb_phy_probe,
+	.remove	= da8xx_usb_phy_remove,
+	.driver	= {
+		.name	= "da8xx-usb-phy",
+		.of_match_table = da8xx_usb_phy_ids,
+	},
+};
+
+module_platform_driver(da8xx_usb_phy_driver);
+
+MODULE_ALIAS("platform:da8xx-usb-phy");
+MODULE_AUTHOR("David Lechner <david@lechnology.com>");
+MODULE_DESCRIPTION("TI DA8xx USB PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/phy-qcom-ufs-qmp-14nm.c b/drivers/phy/phy-qcom-ufs-qmp-14nm.c
index 56631e7..6ee5149 100644
--- a/drivers/phy/phy-qcom-ufs-qmp-14nm.c
+++ b/drivers/phy/phy-qcom-ufs-qmp-14nm.c
@@ -140,7 +140,6 @@
 
 	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
 	if (!phy) {
-		dev_err(dev, "%s: failed to allocate phy\n", __func__);
 		err = -ENOMEM;
 		goto out;
 	}
diff --git a/drivers/phy/phy-qcom-ufs-qmp-20nm.c b/drivers/phy/phy-qcom-ufs-qmp-20nm.c
index b16ea77..770087a 100644
--- a/drivers/phy/phy-qcom-ufs-qmp-20nm.c
+++ b/drivers/phy/phy-qcom-ufs-qmp-20nm.c
@@ -196,7 +196,6 @@
 
 	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
 	if (!phy) {
-		dev_err(dev, "%s: failed to allocate phy\n", __func__);
 		err = -ENOMEM;
 		goto out;
 	}
diff --git a/drivers/phy/phy-rcar-gen3-usb2.c b/drivers/phy/phy-rcar-gen3-usb2.c
index 4be3f5d..31156c9 100644
--- a/drivers/phy/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/phy-rcar-gen3-usb2.c
@@ -21,6 +21,7 @@
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
+#include <linux/workqueue.h>
 
 /******* USB2.0 Host registers (original offset is +0x200) *******/
 #define USB2_INT_ENABLE		0x000
@@ -81,9 +82,25 @@
 	struct extcon_dev *extcon;
 	struct phy *phy;
 	struct regulator *vbus;
+	struct work_struct work;
+	bool extcon_host;
 	bool has_otg;
 };
 
+static void rcar_gen3_phy_usb2_work(struct work_struct *work)
+{
+	struct rcar_gen3_chan *ch = container_of(work, struct rcar_gen3_chan,
+						 work);
+
+	if (ch->extcon_host) {
+		extcon_set_cable_state_(ch->extcon, EXTCON_USB_HOST, true);
+		extcon_set_cable_state_(ch->extcon, EXTCON_USB, false);
+	} else {
+		extcon_set_cable_state_(ch->extcon, EXTCON_USB_HOST, false);
+		extcon_set_cable_state_(ch->extcon, EXTCON_USB, true);
+	}
+}
+
 static void rcar_gen3_set_host_mode(struct rcar_gen3_chan *ch, int host)
 {
 	void __iomem *usb2_base = ch->base;
@@ -130,8 +147,8 @@
 	rcar_gen3_set_host_mode(ch, 1);
 	rcar_gen3_enable_vbus_ctrl(ch, 1);
 
-	extcon_set_cable_state_(ch->extcon, EXTCON_USB_HOST, true);
-	extcon_set_cable_state_(ch->extcon, EXTCON_USB, false);
+	ch->extcon_host = true;
+	schedule_work(&ch->work);
 }
 
 static void rcar_gen3_init_for_peri(struct rcar_gen3_chan *ch)
@@ -140,8 +157,8 @@
 	rcar_gen3_set_host_mode(ch, 0);
 	rcar_gen3_enable_vbus_ctrl(ch, 0);
 
-	extcon_set_cable_state_(ch->extcon, EXTCON_USB_HOST, false);
-	extcon_set_cable_state_(ch->extcon, EXTCON_USB, true);
+	ch->extcon_host = false;
+	schedule_work(&ch->work);
 }
 
 static bool rcar_gen3_check_id(struct rcar_gen3_chan *ch)
@@ -301,6 +318,7 @@
 	if (irq >= 0) {
 		int ret;
 
+		INIT_WORK(&channel->work, rcar_gen3_phy_usb2_work);
 		irq = devm_request_irq(dev, irq, rcar_gen3_phy_usb2_irq,
 				       IRQF_SHARED, dev_name(dev), channel);
 		if (irq < 0)
diff --git a/drivers/phy/phy-rockchip-usb.c b/drivers/phy/phy-rockchip-usb.c
index d60b149..2a7381f 100644
--- a/drivers/phy/phy-rockchip-usb.c
+++ b/drivers/phy/phy-rockchip-usb.c
@@ -236,9 +236,10 @@
 			goto err_clk_prov;
 	}
 
-	err = devm_add_action(base->dev, rockchip_usb_phy_action, rk_phy);
+	err = devm_add_action_or_reset(base->dev, rockchip_usb_phy_action,
+				       rk_phy);
 	if (err)
-		goto err_devm_action;
+		return err;
 
 	rk_phy->phy = devm_phy_create(base->dev, child, &ops);
 	if (IS_ERR(rk_phy->phy)) {
@@ -256,9 +257,6 @@
 	else
 		return rockchip_usb_phy_power(rk_phy, 1);
 
-err_devm_action:
-	if (!rk_phy->uart_enabled)
-		of_clk_del_provider(child);
 err_clk_prov:
 	if (!rk_phy->uart_enabled)
 		clk_unregister(rk_phy->clk480m);
@@ -397,8 +395,13 @@
 	phy_base->pdata = match->data;
 
 	phy_base->dev = dev;
-	phy_base->reg_base = syscon_regmap_lookup_by_phandle(dev->of_node,
-							     "rockchip,grf");
+	phy_base->reg_base = ERR_PTR(-ENODEV);
+	if (dev->parent && dev->parent->of_node)
+		phy_base->reg_base = syscon_node_to_regmap(
+						dev->parent->of_node);
+	if (IS_ERR(phy_base->reg_base))
+		phy_base->reg_base = syscon_regmap_lookup_by_phandle(
+						dev->of_node, "rockchip,grf");
 	if (IS_ERR(phy_base->reg_base)) {
 		dev_err(&pdev->dev, "Missing rockchip,grf property\n");
 		return PTR_ERR(phy_base->reg_base);
@@ -463,7 +466,11 @@
 		return -ENOTSUPP;
 	}
 
-	grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
+	grf = ERR_PTR(-ENODEV);
+	if (np->parent)
+		grf = syscon_node_to_regmap(np->parent);
+	if (IS_ERR(grf))
+		grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
 	if (IS_ERR(grf)) {
 		pr_err("%s: Missing rockchip,grf property, %lu\n",
 		       __func__, PTR_ERR(grf));
diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
index de3101f..0a45bc6 100644
--- a/drivers/phy/phy-sun4i-usb.c
+++ b/drivers/phy/phy-sun4i-usb.c
@@ -94,6 +94,7 @@
 
 enum sun4i_usb_phy_type {
 	sun4i_a10_phy,
+	sun6i_a31_phy,
 	sun8i_a33_phy,
 	sun8i_h3_phy,
 };
@@ -122,7 +123,6 @@
 	/* phy0 / otg related variables */
 	struct extcon_dev *extcon;
 	bool phy0_init;
-	bool phy0_poll;
 	struct gpio_desc *id_det_gpio;
 	struct gpio_desc *vbus_det_gpio;
 	struct power_supply *vbus_power_supply;
@@ -343,6 +343,24 @@
 	return data->vbus_det_gpio || data->vbus_power_supply;
 }
 
+static bool sun4i_usb_phy0_poll(struct sun4i_usb_phy_data *data)
+{
+	if ((data->id_det_gpio && data->id_det_irq <= 0) ||
+	    (data->vbus_det_gpio && data->vbus_det_irq <= 0))
+		return true;
+
+	/*
+	 * The A31 companion pmic (axp221) does not generate vbus change
+	 * interrupts when the board is driving vbus, so we must poll
+	 * when using the pmic for vbus-det _and_ we're driving vbus.
+	 */
+	if (data->cfg->type == sun6i_a31_phy &&
+	    data->vbus_power_supply && data->phys[0].regulator_on)
+		return true;
+
+	return false;
+}
+
 static int sun4i_usb_phy_power_on(struct phy *_phy)
 {
 	struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
@@ -364,7 +382,7 @@
 	phy->regulator_on = true;
 
 	/* We must report Vbus high within OTG_TIME_A_WAIT_VRISE msec. */
-	if (phy->index == 0 && data->vbus_det_gpio && data->phy0_poll)
+	if (phy->index == 0 && sun4i_usb_phy0_poll(data))
 		mod_delayed_work(system_wq, &data->detect, DEBOUNCE_TIME);
 
 	return 0;
@@ -385,7 +403,7 @@
 	 * phy0 vbus typically slowly discharges, sometimes this causes the
 	 * Vbus gpio to not trigger an edge irq on Vbus off, so force a rescan.
 	 */
-	if (phy->index == 0 && data->vbus_det_gpio && !data->phy0_poll)
+	if (phy->index == 0 && !sun4i_usb_phy0_poll(data))
 		mod_delayed_work(system_wq, &data->detect, POLL_TIME);
 
 	return 0;
@@ -468,7 +486,7 @@
 	if (vbus_notify)
 		extcon_set_cable_state_(data->extcon, EXTCON_USB, vbus_det);
 
-	if (data->phy0_poll)
+	if (sun4i_usb_phy0_poll(data))
 		queue_delayed_work(system_wq, &data->detect, POLL_TIME);
 }
 
@@ -644,11 +662,6 @@
 	}
 
 	data->id_det_irq = gpiod_to_irq(data->id_det_gpio);
-	data->vbus_det_irq = gpiod_to_irq(data->vbus_det_gpio);
-	if ((data->id_det_gpio && data->id_det_irq <= 0) ||
-	    (data->vbus_det_gpio && data->vbus_det_irq <= 0))
-		data->phy0_poll = true;
-
 	if (data->id_det_irq > 0) {
 		ret = devm_request_irq(dev, data->id_det_irq,
 				sun4i_usb_phy0_id_vbus_det_irq,
@@ -660,6 +673,7 @@
 		}
 	}
 
+	data->vbus_det_irq = gpiod_to_irq(data->vbus_det_gpio);
 	if (data->vbus_det_irq > 0) {
 		ret = devm_request_irq(dev, data->vbus_det_irq,
 				sun4i_usb_phy0_id_vbus_det_irq,
@@ -711,7 +725,7 @@
 
 static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = {
 	.num_phys = 3,
-	.type = sun4i_a10_phy,
+	.type = sun6i_a31_phy,
 	.disc_thresh = 3,
 	.phyctl_offset = REG_PHYCTL_A10,
 	.dedicated_clocks = true,
diff --git a/drivers/phy/phy-xgene.c b/drivers/phy/phy-xgene.c
index 385362e..ae266e0 100644
--- a/drivers/phy/phy-xgene.c
+++ b/drivers/phy/phy-xgene.c
@@ -518,7 +518,7 @@
 	CLK_INT_SING = 2,	/* Internal single ended */
 };
 
-enum phy_mode {
+enum xgene_phy_mode {
 	MODE_SATA	= 0,	/* List them for simple reference */
 	MODE_SGMII	= 1,
 	MODE_PCIE	= 2,
@@ -542,7 +542,7 @@
 struct xgene_phy_ctx {
 	struct device *dev;
 	struct phy *phy;
-	enum phy_mode mode;		/* Mode of operation */
+	enum xgene_phy_mode mode;		/* Mode of operation */
 	enum clk_type_t clk_type;	/* Input clock selection */
 	void __iomem *sds_base;		/* PHY CSR base addr */
 	struct clk *clk;		/* Optional clock */
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 421770d..0f11a0f 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -309,6 +309,7 @@
 config CHARGER_ISP1704
 	tristate "ISP1704 USB Charger Detection"
 	depends on USB_PHY
+	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
 	help
 	  Say Y to enable support for USB Charger Detection with
 	  ISP1707/ISP1704 USB transceivers.
diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig
index 3644a350..5e5b9eb 100644
--- a/drivers/usb/chipidea/Kconfig
+++ b/drivers/usb/chipidea/Kconfig
@@ -4,8 +4,9 @@
 	select EXTCON
 	help
 	  Say Y here if your system has a dual role high speed USB
-	  controller based on ChipIdea silicon IP. Currently, only the
-	  peripheral mode is supported.
+	  controller based on ChipIdea silicon IP. It supports:
+	  Dual-role switch (ID, OTG FSM, sysfs), Host-only, and
+	  Peripheral-only.
 
 	  When compiled dynamically, the module will be called ci-hdrc.ko.
 
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 94a14f5..7191230 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -946,7 +946,7 @@
 	DECLARE_WAITQUEUE(wait, current);
 	struct async_icount old, new;
 
-	if (arg & (TIOCM_DSR | TIOCM_RI | TIOCM_CD ))
+	if (arg & (TIOCM_DSR | TIOCM_RI | TIOCM_CD))
 		return -EINVAL;
 	do {
 		spin_lock_irq(&acm->read_lock);
@@ -1146,7 +1146,7 @@
 		     const struct usb_device_id *id)
 {
 	struct usb_cdc_union_desc *union_header = NULL;
-	struct usb_cdc_country_functional_desc *cfd = NULL;
+	struct usb_cdc_call_mgmt_descriptor *cmgmd = NULL;
 	unsigned char *buffer = intf->altsetting->extra;
 	int buflen = intf->altsetting->extralen;
 	struct usb_interface *control_interface;
@@ -1155,18 +1155,16 @@
 	struct usb_endpoint_descriptor *epread = NULL;
 	struct usb_endpoint_descriptor *epwrite = NULL;
 	struct usb_device *usb_dev = interface_to_usbdev(intf);
+	struct usb_cdc_parsed_header h;
 	struct acm *acm;
 	int minor;
 	int ctrlsize, readsize;
 	u8 *buf;
-	u8 ac_management_function = 0;
-	u8 call_management_function = 0;
-	int call_interface_num = -1;
-	int data_interface_num = -1;
+	int call_intf_num = -1;
+	int data_intf_num = -1;
 	unsigned long quirks;
 	int num_rx_buf;
 	int i;
-	unsigned int elength = 0;
 	int combined_interfaces = 0;
 	struct device *tty_dev;
 	int rv = -ENOMEM;
@@ -1210,70 +1208,22 @@
 		}
 	}
 
-	while (buflen > 0) {
-		elength = buffer[0];
-		if (!elength) {
-			dev_err(&intf->dev, "skipping garbage byte\n");
-			elength = 1;
-			goto next_desc;
-		}
-		if (buffer[1] != USB_DT_CS_INTERFACE) {
-			dev_err(&intf->dev, "skipping garbage\n");
-			goto next_desc;
-		}
-
-		switch (buffer[2]) {
-		case USB_CDC_UNION_TYPE: /* we've found it */
-			if (elength < sizeof(struct usb_cdc_union_desc))
-				goto next_desc;
-			if (union_header) {
-				dev_err(&intf->dev, "More than one "
-					"union descriptor, skipping ...\n");
-				goto next_desc;
-			}
-			union_header = (struct usb_cdc_union_desc *)buffer;
-			break;
-		case USB_CDC_COUNTRY_TYPE: /* export through sysfs*/
-			if (elength < sizeof(struct usb_cdc_country_functional_desc))
-				goto next_desc;
-			cfd = (struct usb_cdc_country_functional_desc *)buffer;
-			break;
-		case USB_CDC_HEADER_TYPE: /* maybe check version */
-			break; /* for now we ignore it */
-		case USB_CDC_ACM_TYPE:
-			if (elength < 4)
-				goto next_desc;
-			ac_management_function = buffer[3];
-			break;
-		case USB_CDC_CALL_MANAGEMENT_TYPE:
-			if (elength < 5)
-				goto next_desc;
-			call_management_function = buffer[3];
-			call_interface_num = buffer[4];
-			break;
-		default:
-			/*
-			 * there are LOTS more CDC descriptors that
-			 * could legitimately be found here.
-			 */
-			dev_dbg(&intf->dev, "Ignoring descriptor: "
-					"type %02x, length %ud\n",
-					buffer[2], elength);
-			break;
-		}
-next_desc:
-		buflen -= elength;
-		buffer += elength;
-	}
+	cdc_parse_cdc_header(&h, intf, buffer, buflen);
+	union_header = h.usb_cdc_union_desc;
+	cmgmd = h.usb_cdc_call_mgmt_descriptor;
+	if (cmgmd)
+		call_intf_num = cmgmd->bDataInterface;
 
 	if (!union_header) {
-		if (call_interface_num > 0) {
+		if (call_intf_num > 0) {
 			dev_dbg(&intf->dev, "No union descriptor, using call management descriptor\n");
 			/* quirks for Droids MuIn LCD */
-			if (quirks & NO_DATA_INTERFACE)
+			if (quirks & NO_DATA_INTERFACE) {
 				data_interface = usb_ifnum_to_if(usb_dev, 0);
-			else
-				data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = call_interface_num));
+			} else {
+				data_intf_num = call_intf_num;
+				data_interface = usb_ifnum_to_if(usb_dev, data_intf_num);
+			}
 			control_interface = intf;
 		} else {
 			if (intf->cur_altsetting->desc.bNumEndpoints != 3) {
@@ -1287,8 +1237,9 @@
 			}
 		}
 	} else {
+		data_intf_num = union_header->bSlaveInterface0;
 		control_interface = usb_ifnum_to_if(usb_dev, union_header->bMasterInterface0);
-		data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = union_header->bSlaveInterface0));
+		data_interface = usb_ifnum_to_if(usb_dev, data_intf_num);
 	}
 
 	if (!control_interface || !data_interface) {
@@ -1296,7 +1247,7 @@
 		return -ENODEV;
 	}
 
-	if (data_interface_num != call_interface_num)
+	if (data_intf_num != call_intf_num)
 		dev_dbg(&intf->dev, "Separate call control interface. That is not fully supported.\n");
 
 	if (control_interface == data_interface) {
@@ -1379,11 +1330,8 @@
 		goto alloc_fail;
 
 	minor = acm_alloc_minor(acm);
-	if (minor < 0) {
-		dev_err(&intf->dev, "no more free acm devices\n");
-		kfree(acm);
-		return -ENODEV;
-	}
+	if (minor < 0)
+		goto alloc_fail1;
 
 	ctrlsize = usb_endpoint_maxp(epctrl);
 	readsize = usb_endpoint_maxp(epread) *
@@ -1394,7 +1342,8 @@
 	acm->data = data_interface;
 	acm->minor = minor;
 	acm->dev = usb_dev;
-	acm->ctrl_caps = ac_management_function;
+	if (h.usb_cdc_acm_descriptor)
+		acm->ctrl_caps = h.usb_cdc_acm_descriptor->bmCapabilities;
 	if (quirks & NO_CAP_LINE)
 		acm->ctrl_caps &= ~USB_CDC_CAP_LINE;
 	acm->ctrlsize = ctrlsize;
@@ -1488,7 +1437,10 @@
 	if (i < 0)
 		goto alloc_fail7;
 
-	if (cfd) { /* export the country data */
+	if (h.usb_cdc_country_functional_desc) { /* export the country data */
+		struct usb_cdc_country_functional_desc * cfd =
+					h.usb_cdc_country_functional_desc;
+
 		acm->country_codes = kmalloc(cfd->bLength - 4, GFP_KERNEL);
 		if (!acm->country_codes)
 			goto skip_countries;
@@ -1572,6 +1524,7 @@
 	usb_free_coherent(usb_dev, ctrlsize, acm->ctrl_buffer, acm->ctrl_dma);
 alloc_fail2:
 	acm_release_minor(acm);
+alloc_fail1:
 	kfree(acm);
 alloc_fail:
 	return rv;
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 61ea879..337948c 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -875,38 +875,18 @@
 	int rv = -EINVAL;
 	struct usb_host_interface *iface;
 	struct usb_endpoint_descriptor *ep;
-	struct usb_cdc_dmm_desc *dmhd;
+	struct usb_cdc_parsed_header hdr;
 	u8 *buffer = intf->altsetting->extra;
 	int buflen = intf->altsetting->extralen;
 	u16 maxcom = WDM_DEFAULT_BUFSIZE;
 
 	if (!buffer)
 		goto err;
-	while (buflen > 2) {
-		if (buffer[1] != USB_DT_CS_INTERFACE) {
-			dev_err(&intf->dev, "skipping garbage\n");
-			goto next_desc;
-		}
 
-		switch (buffer[2]) {
-		case USB_CDC_HEADER_TYPE:
-			break;
-		case USB_CDC_DMM_TYPE:
-			dmhd = (struct usb_cdc_dmm_desc *)buffer;
-			maxcom = le16_to_cpu(dmhd->wMaxCommand);
-			dev_dbg(&intf->dev,
-				"Finding maximum buffer length: %d", maxcom);
-			break;
-		default:
-			dev_err(&intf->dev,
-				"Ignoring extra header, type %d, length %d\n",
-				buffer[2], buffer[0]);
-			break;
-		}
-next_desc:
-		buflen -= buffer[0];
-		buffer += buffer[0];
-	}
+	cdc_parse_cdc_header(&hdr, intf, buffer, buflen);
+
+	if (hdr.usb_cdc_dmm_desc)
+		maxcom = le16_to_cpu(hdr.usb_cdc_dmm_desc->wMaxCommand);
 
 	iface = intf->cur_altsetting;
 	if (iface->desc.bNumEndpoints != 1)
diff --git a/drivers/usb/common/common.c b/drivers/usb/common/common.c
index e3d0161..5ef8da6 100644
--- a/drivers/usb/common/common.c
+++ b/drivers/usb/common/common.c
@@ -131,15 +131,17 @@
  * of_usb_get_dr_mode_by_phy - Get dual role mode for the controller device
  * which is associated with the given phy device_node
  * @np:	Pointer to the given phy device_node
+ * @arg0: phandle args[0] for phy's with #phy-cells >= 1, or -1 for
+ *        phys which do not have phy-cells
  *
  * In dts a usb controller associates with phy devices.  The function gets
  * the string from property 'dr_mode' of the controller associated with the
  * given phy device node, and returns the correspondig enum usb_dr_mode.
  */
-enum usb_dr_mode of_usb_get_dr_mode_by_phy(struct device_node *phy_np)
+enum usb_dr_mode of_usb_get_dr_mode_by_phy(struct device_node *np, int arg0)
 {
 	struct device_node *controller = NULL;
-	struct device_node *phy;
+	struct of_phandle_args args;
 	const char *dr_mode;
 	int index;
 	int err;
@@ -148,12 +150,24 @@
 		controller = of_find_node_with_property(controller, "phys");
 		index = 0;
 		do {
-			phy = of_parse_phandle(controller, "phys", index);
-			of_node_put(phy);
-			if (phy == phy_np)
+			if (arg0 == -1) {
+				args.np = of_parse_phandle(controller, "phys",
+							index);
+				args.args_count = 0;
+			} else {
+				err = of_parse_phandle_with_args(controller,
+							"phys", "#phy-cells",
+							index, &args);
+				if (err)
+					break;
+			}
+
+			of_node_put(args.np);
+			if (args.np == np && (args.args_count == 0 ||
+					      args.args[0] == arg0))
 				goto finish;
 			index++;
-		} while (phy);
+		} while (args.np);
 	} while (controller);
 
 finish:
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index ea681f1..0406a59 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -12,6 +12,7 @@
 #include <linux/nls.h>
 #include <linux/device.h>
 #include <linux/scatterlist.h>
+#include <linux/usb/cdc.h>
 #include <linux/usb/quirks.h>
 #include <linux/usb/hcd.h>	/* for usbcore internals */
 #include <asm/byteorder.h>
@@ -2023,3 +2024,155 @@
 	return 0;
 }
 EXPORT_SYMBOL_GPL(usb_driver_set_configuration);
+
+/**
+ * cdc_parse_cdc_header - parse the extra headers present in CDC devices
+ * @hdr: the place to put the results of the parsing
+ * @intf: the interface for which parsing is requested
+ * @buffer: pointer to the extra headers to be parsed
+ * @buflen: length of the extra headers
+ *
+ * This evaluates the extra headers present in CDC devices which
+ * bind the interfaces for data and control and provide details
+ * about the capabilities of the device.
+ *
+ * Return: number of descriptors parsed or -EINVAL
+ * if the header is contradictory beyond salvage
+ */
+
+int cdc_parse_cdc_header(struct usb_cdc_parsed_header *hdr,
+				struct usb_interface *intf,
+				u8 *buffer,
+				int buflen)
+{
+	/* duplicates are ignored */
+	struct usb_cdc_union_desc *union_header = NULL;
+
+	/* duplicates are not tolerated */
+	struct usb_cdc_header_desc *header = NULL;
+	struct usb_cdc_ether_desc *ether = NULL;
+	struct usb_cdc_mdlm_detail_desc *detail = NULL;
+	struct usb_cdc_mdlm_desc *desc = NULL;
+
+	unsigned int elength;
+	int cnt = 0;
+
+	memset(hdr, 0x00, sizeof(struct usb_cdc_parsed_header));
+	hdr->phonet_magic_present = false;
+	while (buflen > 0) {
+		elength = buffer[0];
+		if (!elength) {
+			dev_err(&intf->dev, "skipping garbage byte\n");
+			elength = 1;
+			goto next_desc;
+		}
+		if (buffer[1] != USB_DT_CS_INTERFACE) {
+			dev_err(&intf->dev, "skipping garbage\n");
+			goto next_desc;
+		}
+
+		switch (buffer[2]) {
+		case USB_CDC_UNION_TYPE: /* we've found it */
+			if (elength < sizeof(struct usb_cdc_union_desc))
+				goto next_desc;
+			if (union_header) {
+				dev_err(&intf->dev, "More than one union descriptor, skipping ...\n");
+				goto next_desc;
+			}
+			union_header = (struct usb_cdc_union_desc *)buffer;
+			break;
+		case USB_CDC_COUNTRY_TYPE:
+			if (elength < sizeof(struct usb_cdc_country_functional_desc))
+				goto next_desc;
+			hdr->usb_cdc_country_functional_desc =
+				(struct usb_cdc_country_functional_desc *)buffer;
+			break;
+		case USB_CDC_HEADER_TYPE:
+			if (elength != sizeof(struct usb_cdc_header_desc))
+				goto next_desc;
+			if (header)
+				return -EINVAL;
+			header = (struct usb_cdc_header_desc *)buffer;
+			break;
+		case USB_CDC_ACM_TYPE:
+			if (elength < sizeof(struct usb_cdc_acm_descriptor))
+				goto next_desc;
+			hdr->usb_cdc_acm_descriptor =
+				(struct usb_cdc_acm_descriptor *)buffer;
+			break;
+		case USB_CDC_ETHERNET_TYPE:
+			if (elength != sizeof(struct usb_cdc_ether_desc))
+				goto next_desc;
+			if (ether)
+				return -EINVAL;
+			ether = (struct usb_cdc_ether_desc *)buffer;
+			break;
+		case USB_CDC_CALL_MANAGEMENT_TYPE:
+			if (elength < sizeof(struct usb_cdc_call_mgmt_descriptor))
+				goto next_desc;
+			hdr->usb_cdc_call_mgmt_descriptor =
+				(struct usb_cdc_call_mgmt_descriptor *)buffer;
+			break;
+		case USB_CDC_DMM_TYPE:
+			if (elength < sizeof(struct usb_cdc_dmm_desc))
+				goto next_desc;
+			hdr->usb_cdc_dmm_desc =
+				(struct usb_cdc_dmm_desc *)buffer;
+			break;
+		case USB_CDC_MDLM_TYPE:
+			if (elength < sizeof(struct usb_cdc_mdlm_desc *))
+				goto next_desc;
+			if (desc)
+				return -EINVAL;
+			desc = (struct usb_cdc_mdlm_desc *)buffer;
+			break;
+		case USB_CDC_MDLM_DETAIL_TYPE:
+			if (elength < sizeof(struct usb_cdc_mdlm_detail_desc *))
+				goto next_desc;
+			if (detail)
+				return -EINVAL;
+			detail = (struct usb_cdc_mdlm_detail_desc *)buffer;
+			break;
+		case USB_CDC_NCM_TYPE:
+			if (elength < sizeof(struct usb_cdc_ncm_desc))
+				goto next_desc;
+			hdr->usb_cdc_ncm_desc = (struct usb_cdc_ncm_desc *)buffer;
+			break;
+		case USB_CDC_MBIM_TYPE:
+			if (elength < sizeof(struct usb_cdc_mbim_desc))
+				goto next_desc;
+
+			hdr->usb_cdc_mbim_desc = (struct usb_cdc_mbim_desc *)buffer;
+			break;
+		case USB_CDC_MBIM_EXTENDED_TYPE:
+			if (elength < sizeof(struct usb_cdc_mbim_extended_desc))
+				break;
+			hdr->usb_cdc_mbim_extended_desc =
+				(struct usb_cdc_mbim_extended_desc *)buffer;
+			break;
+		case CDC_PHONET_MAGIC_NUMBER:
+			hdr->phonet_magic_present = true;
+			break;
+		default:
+			/*
+			 * there are LOTS more CDC descriptors that
+			 * could legitimately be found here.
+			 */
+			dev_dbg(&intf->dev, "Ignoring descriptor: type %02x, length %ud\n",
+					buffer[2], elength);
+			goto next_desc;
+		}
+		cnt++;
+next_desc:
+		buflen -= elength;
+		buffer += elength;
+	}
+	hdr->usb_cdc_union_desc = union_header;
+	hdr->usb_cdc_header_desc = header;
+	hdr->usb_cdc_mdlm_detail_desc = detail;
+	hdr->usb_cdc_mdlm_desc = desc;
+	hdr->usb_cdc_ether_desc = ether;
+	return cnt;
+}
+
+EXPORT_SYMBOL(cdc_parse_cdc_header);
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 944a6dc..d2e50a2 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -128,6 +128,9 @@
 	{ USB_DEVICE(0x04f3, 0x016f), .driver_info =
 			USB_QUIRK_DEVICE_QUALIFIER },
 
+	{ USB_DEVICE(0x04f3, 0x0381), .driver_info =
+			USB_QUIRK_NO_LPM },
+
 	{ USB_DEVICE(0x04f3, 0x21b8), .driver_info =
 			USB_QUIRK_DEVICE_QUALIFIER },
 
diff --git a/drivers/usb/dwc2/Kconfig b/drivers/usb/dwc2/Kconfig
index c1f29ca..e838701 100644
--- a/drivers/usb/dwc2/Kconfig
+++ b/drivers/usb/dwc2/Kconfig
@@ -55,6 +55,7 @@
 config USB_DWC2_PCI
 	tristate "DWC2 PCI"
 	depends on PCI
+	depends on USB_GADGET || !USB_GADGET
 	default n
 	select NOP_USB_XCEIV
 	help
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index dec0b21..9fae029 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -166,7 +166,7 @@
  *          means that it is sending data to the Host.
  * @index: The index for the endpoint registers.
  * @mc: Multi Count - number of transactions per microframe
- * @interval - Interval for periodic endpoints
+ * @interval - Interval for periodic endpoints, in frames or microframes.
  * @name: The name array passed to the USB core.
  * @halted: Set if the endpoint has been halted.
  * @periodic: Set if this is a periodic ep, such as Interrupt
@@ -177,6 +177,8 @@
  * @fifo_load: The amount of data loaded into the FIFO (periodic IN)
  * @last_load: The offset of data for the last start of request.
  * @size_loaded: The last loaded size for DxEPTSIZE for periodic IN
+ * @target_frame: Targeted frame num to setup next ISOC transfer
+ * @frame_overrun: Indicates SOF number overrun in DSTS
  *
  * This is the driver's state for each registered enpoint, allowing it
  * to keep track of transactions that need doing. Each endpoint has a
@@ -213,7 +215,9 @@
 	unsigned int            periodic:1;
 	unsigned int            isochronous:1;
 	unsigned int            send_zlp:1;
-	unsigned int            has_correct_parity:1;
+	unsigned int            target_frame;
+#define TARGET_FRAME_INITIAL   0xFFFFFFFF
+	bool			frame_overrun;
 
 	char                    name[10];
 };
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 26cf09d..af46adf 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -97,6 +97,25 @@
 }
 
 /**
+ * dwc2_gadget_incr_frame_num - Increments the targeted frame number.
+ * @hs_ep: The endpoint
+ * @increment: The value to increment by
+ *
+ * This function will also check if the frame number overruns DSTS_SOFFN_LIMIT.
+ * If an overrun occurs it will wrap the value and set the frame_overrun flag.
+ */
+static inline void dwc2_gadget_incr_frame_num(struct dwc2_hsotg_ep *hs_ep)
+{
+	hs_ep->target_frame += hs_ep->interval;
+	if (hs_ep->target_frame > DSTS_SOFFN_LIMIT) {
+		hs_ep->frame_overrun = 1;
+		hs_ep->target_frame &= DSTS_SOFFN_LIMIT;
+	} else {
+		hs_ep->frame_overrun = 0;
+	}
+}
+
+/**
  * dwc2_hsotg_en_gsint - enable one or more of the general interrupt
  * @hsotg: The device state
  * @ints: A bitmask of the interrupts to enable
@@ -504,6 +523,23 @@
 }
 
 /**
+* dwc2_hsotg_read_frameno - read current frame number
+* @hsotg: The device instance
+*
+* Return the current frame number
+*/
+static u32 dwc2_hsotg_read_frameno(struct dwc2_hsotg *hsotg)
+{
+	u32 dsts;
+
+	dsts = dwc2_readl(hsotg->regs + DSTS);
+	dsts &= DSTS_SOFFN_MASK;
+	dsts >>= DSTS_SOFFN_SHIFT;
+
+	return dsts;
+}
+
+/**
  * dwc2_hsotg_start_req - start a USB request from an endpoint's queue
  * @hsotg: The controller state.
  * @hs_ep: The endpoint to process a request for
@@ -631,8 +667,17 @@
 			__func__, &ureq->dma, dma_reg);
 	}
 
+	if (hs_ep->isochronous && hs_ep->interval == 1) {
+		hs_ep->target_frame = dwc2_hsotg_read_frameno(hsotg);
+		dwc2_gadget_incr_frame_num(hs_ep);
+
+		if (hs_ep->target_frame & 0x1)
+			ctrl |= DXEPCTL_SETODDFR;
+		else
+			ctrl |= DXEPCTL_SETEVENFR;
+	}
+
 	ctrl |= DXEPCTL_EPENA;	/* ensure ep enabled */
-	ctrl |= DXEPCTL_USBACTEP;
 
 	dev_dbg(hsotg->dev, "ep0 state:%d\n", hsotg->ep0_state);
 
@@ -659,14 +704,6 @@
 	}
 
 	/*
-	 * clear the INTknTXFEmpMsk when we start request, more as a aide
-	 * to debugging to see what is going on.
-	 */
-	if (dir_in)
-		dwc2_writel(DIEPMSK_INTKNTXFEMPMSK,
-		       hsotg->regs + DIEPINT(index));
-
-	/*
 	 * Note, trying to clear the NAK here causes problems with transmit
 	 * on the S3C6400 ending up with the TXFIFO becoming full.
 	 */
@@ -773,6 +810,30 @@
 	hs_req->saved_req_buf = NULL;
 }
 
+/**
+ * dwc2_gadget_target_frame_elapsed - Checks target frame
+ * @hs_ep: The driver endpoint to check
+ *
+ * Returns 1 if targeted frame elapsed. If returned 1 then we need to drop
+ * corresponding transfer.
+ */
+static bool dwc2_gadget_target_frame_elapsed(struct dwc2_hsotg_ep *hs_ep)
+{
+	struct dwc2_hsotg *hsotg = hs_ep->parent;
+	u32 target_frame = hs_ep->target_frame;
+	u32 current_frame = dwc2_hsotg_read_frameno(hsotg);
+	bool frame_overrun = hs_ep->frame_overrun;
+
+	if (!frame_overrun && current_frame >= target_frame)
+		return true;
+
+	if (frame_overrun && current_frame >= target_frame &&
+	    ((current_frame - target_frame) < DSTS_SOFFN_LIMIT / 2))
+		return true;
+
+	return false;
+}
+
 static int dwc2_hsotg_ep_queue(struct usb_ep *ep, struct usb_request *req,
 			      gfp_t gfp_flags)
 {
@@ -812,9 +873,18 @@
 	first = list_empty(&hs_ep->queue);
 	list_add_tail(&hs_req->queue, &hs_ep->queue);
 
-	if (first)
-		dwc2_hsotg_start_req(hs, hs_ep, hs_req, false);
+	if (first) {
+		if (!hs_ep->isochronous) {
+			dwc2_hsotg_start_req(hs, hs_ep, hs_req, false);
+			return 0;
+		}
 
+		while (dwc2_gadget_target_frame_elapsed(hs_ep))
+			dwc2_gadget_incr_frame_num(hs_ep);
+
+		if (hs_ep->target_frame != TARGET_FRAME_INITIAL)
+			dwc2_hsotg_start_req(hs, hs_ep, hs_req, false);
+	}
 	return 0;
 }
 
@@ -1035,6 +1105,42 @@
 }
 
 /**
+ * dwc2_gadget_start_next_request - Starts next request from ep queue
+ * @hs_ep: Endpoint structure
+ *
+ * If queue is empty and EP is ISOC-OUT - unmasks OUTTKNEPDIS which is masked
+ * in its handler. Hence we need to unmask it here to be able to do
+ * resynchronization.
+ */
+static void dwc2_gadget_start_next_request(struct dwc2_hsotg_ep *hs_ep)
+{
+	u32 mask;
+	struct dwc2_hsotg *hsotg = hs_ep->parent;
+	int dir_in = hs_ep->dir_in;
+	struct dwc2_hsotg_req *hs_req;
+	u32 epmsk_reg = dir_in ? DIEPMSK : DOEPMSK;
+
+	if (!list_empty(&hs_ep->queue)) {
+		hs_req = get_ep_head(hs_ep);
+		dwc2_hsotg_start_req(hsotg, hs_ep, hs_req, false);
+		return;
+	}
+	if (!hs_ep->isochronous)
+		return;
+
+	if (dir_in) {
+		dev_dbg(hsotg->dev, "%s: No more ISOC-IN requests\n",
+			__func__);
+	} else {
+		dev_dbg(hsotg->dev, "%s: No more ISOC-OUT requests\n",
+			__func__);
+		mask = dwc2_readl(hsotg->regs + epmsk_reg);
+		mask |= DOEPMSK_OUTTKNEPDISMSK;
+		dwc2_writel(mask, hsotg->regs + epmsk_reg);
+	}
+}
+
+/**
  * dwc2_hsotg_process_req_feature - process request {SET,CLEAR}_FEATURE
  * @hsotg: The device state
  * @ctrl: USB control request
@@ -1044,7 +1150,6 @@
 {
 	struct dwc2_hsotg_ep *ep0 = hsotg->eps_out[0];
 	struct dwc2_hsotg_req *hs_req;
-	bool restart;
 	bool set = (ctrl->bRequest == USB_REQ_SET_FEATURE);
 	struct dwc2_hsotg_ep *ep;
 	int ret;
@@ -1127,12 +1232,7 @@
 
 				/* If we have pending request, then start it */
 				if (!ep->req) {
-					restart = !list_empty(&ep->queue);
-					if (restart) {
-						hs_req = get_ep_head(ep);
-						dwc2_hsotg_start_req(hsotg, ep,
-								hs_req, false);
-					}
+					dwc2_gadget_start_next_request(ep);
 				}
 			}
 
@@ -1373,7 +1473,6 @@
 				       struct dwc2_hsotg_req *hs_req,
 				       int result)
 {
-	bool restart;
 
 	if (!hs_req) {
 		dev_dbg(hsotg->dev, "%s: nothing to complete?\n", __func__);
@@ -1417,11 +1516,7 @@
 	 */
 
 	if (!hs_ep->req && result >= 0) {
-		restart = !list_empty(&hs_ep->queue);
-		if (restart) {
-			hs_req = get_ep_head(hs_ep);
-			dwc2_hsotg_start_req(hsotg, hs_ep, hs_req, false);
-		}
+		dwc2_gadget_start_next_request(hs_ep);
 	}
 }
 
@@ -1597,32 +1692,16 @@
 	 * adjust the ISOC parity here.
 	 */
 	if (!using_dma(hsotg)) {
-		hs_ep->has_correct_parity = 1;
 		if (hs_ep->isochronous && hs_ep->interval == 1)
 			dwc2_hsotg_change_ep_iso_parity(hsotg, DOEPCTL(epnum));
+		else if (hs_ep->isochronous && hs_ep->interval > 1)
+			dwc2_gadget_incr_frame_num(hs_ep);
 	}
 
 	dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, result);
 }
 
 /**
- * dwc2_hsotg_read_frameno - read current frame number
- * @hsotg: The device instance
- *
- * Return the current frame number
- */
-static u32 dwc2_hsotg_read_frameno(struct dwc2_hsotg *hsotg)
-{
-	u32 dsts;
-
-	dsts = dwc2_readl(hsotg->regs + DSTS);
-	dsts &= DSTS_SOFFN_MASK;
-	dsts >>= DSTS_SOFFN_SHIFT;
-
-	return dsts;
-}
-
-/**
  * dwc2_hsotg_handle_rx - RX FIFO has data
  * @hsotg: The device instance
  *
@@ -1937,6 +2016,190 @@
 }
 
 /**
+ * dwc2_gadget_read_ep_interrupts - reads interrupts for given ep
+ * @hsotg: The device state.
+ * @idx: Index of ep.
+ * @dir_in: Endpoint direction 1-in 0-out.
+ *
+ * Reads for endpoint with given index and direction, by masking
+ * epint_reg with coresponding mask.
+ */
+static u32 dwc2_gadget_read_ep_interrupts(struct dwc2_hsotg *hsotg,
+					  unsigned int idx, int dir_in)
+{
+	u32 epmsk_reg = dir_in ? DIEPMSK : DOEPMSK;
+	u32 epint_reg = dir_in ? DIEPINT(idx) : DOEPINT(idx);
+	u32 ints;
+	u32 mask;
+	u32 diepempmsk;
+
+	mask = dwc2_readl(hsotg->regs + epmsk_reg);
+	diepempmsk = dwc2_readl(hsotg->regs + DIEPEMPMSK);
+	mask |= ((diepempmsk >> idx) & 0x1) ? DIEPMSK_TXFIFOEMPTY : 0;
+	mask |= DXEPINT_SETUP_RCVD;
+
+	ints = dwc2_readl(hsotg->regs + epint_reg);
+	ints &= mask;
+	return ints;
+}
+
+/**
+ * dwc2_gadget_handle_ep_disabled - handle DXEPINT_EPDISBLD
+ * @hs_ep: The endpoint on which interrupt is asserted.
+ *
+ * This interrupt indicates that the endpoint has been disabled per the
+ * application's request.
+ *
+ * For IN endpoints flushes txfifo, in case of BULK clears DCTL_CGNPINNAK,
+ * in case of ISOC completes current request.
+ *
+ * For ISOC-OUT endpoints completes expired requests. If there is remaining
+ * request starts it.
+ */
+static void dwc2_gadget_handle_ep_disabled(struct dwc2_hsotg_ep *hs_ep)
+{
+	struct dwc2_hsotg *hsotg = hs_ep->parent;
+	struct dwc2_hsotg_req *hs_req;
+	unsigned char idx = hs_ep->index;
+	int dir_in = hs_ep->dir_in;
+	u32 epctl_reg = dir_in ? DIEPCTL(idx) : DOEPCTL(idx);
+	int dctl = dwc2_readl(hsotg->regs + DCTL);
+
+	dev_dbg(hsotg->dev, "%s: EPDisbld\n", __func__);
+
+	if (dir_in) {
+		int epctl = dwc2_readl(hsotg->regs + epctl_reg);
+
+		dwc2_hsotg_txfifo_flush(hsotg, hs_ep->fifo_index);
+
+		if (hs_ep->isochronous) {
+			dwc2_hsotg_complete_in(hsotg, hs_ep);
+			return;
+		}
+
+		if ((epctl & DXEPCTL_STALL) && (epctl & DXEPCTL_EPTYPE_BULK)) {
+			int dctl = dwc2_readl(hsotg->regs + DCTL);
+
+			dctl |= DCTL_CGNPINNAK;
+			dwc2_writel(dctl, hsotg->regs + DCTL);
+		}
+		return;
+	}
+
+	if (dctl & DCTL_GOUTNAKSTS) {
+		dctl |= DCTL_CGOUTNAK;
+		dwc2_writel(dctl, hsotg->regs + DCTL);
+	}
+
+	if (!hs_ep->isochronous)
+		return;
+
+	if (list_empty(&hs_ep->queue)) {
+		dev_dbg(hsotg->dev, "%s: complete_ep 0x%p, ep->queue empty!\n",
+			__func__, hs_ep);
+		return;
+	}
+
+	do {
+		hs_req = get_ep_head(hs_ep);
+		if (hs_req)
+			dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req,
+						    -ENODATA);
+		dwc2_gadget_incr_frame_num(hs_ep);
+	} while (dwc2_gadget_target_frame_elapsed(hs_ep));
+
+	dwc2_gadget_start_next_request(hs_ep);
+}
+
+/**
+ * dwc2_gadget_handle_out_token_ep_disabled - handle DXEPINT_OUTTKNEPDIS
+ * @hs_ep: The endpoint on which interrupt is asserted.
+ *
+ * This is starting point for ISOC-OUT transfer, synchronization done with
+ * first out token received from host while corresponding EP is disabled.
+ *
+ * Device does not know initial frame in which out token will come. For this
+ * HW generates OUTTKNEPDIS - out token is received while EP is disabled. Upon
+ * getting this interrupt SW starts calculation for next transfer frame.
+ */
+static void dwc2_gadget_handle_out_token_ep_disabled(struct dwc2_hsotg_ep *ep)
+{
+	struct dwc2_hsotg *hsotg = ep->parent;
+	int dir_in = ep->dir_in;
+	u32 doepmsk;
+
+	if (dir_in || !ep->isochronous)
+		return;
+
+	dwc2_hsotg_complete_request(hsotg, ep, get_ep_head(ep), -ENODATA);
+
+	if (ep->interval > 1 &&
+	    ep->target_frame == TARGET_FRAME_INITIAL) {
+		u32 dsts;
+		u32 ctrl;
+
+		dsts = dwc2_readl(hsotg->regs + DSTS);
+		ep->target_frame = dwc2_hsotg_read_frameno(hsotg);
+		dwc2_gadget_incr_frame_num(ep);
+
+		ctrl = dwc2_readl(hsotg->regs + DOEPCTL(ep->index));
+		if (ep->target_frame & 0x1)
+			ctrl |= DXEPCTL_SETODDFR;
+		else
+			ctrl |= DXEPCTL_SETEVENFR;
+
+		dwc2_writel(ctrl, hsotg->regs + DOEPCTL(ep->index));
+	}
+
+	dwc2_gadget_start_next_request(ep);
+	doepmsk = dwc2_readl(hsotg->regs + DOEPMSK);
+	doepmsk &= ~DOEPMSK_OUTTKNEPDISMSK;
+	dwc2_writel(doepmsk, hsotg->regs + DOEPMSK);
+}
+
+/**
+* dwc2_gadget_handle_nak - handle NAK interrupt
+* @hs_ep: The endpoint on which interrupt is asserted.
+*
+* This is starting point for ISOC-IN transfer, synchronization done with
+* first IN token received from host while corresponding EP is disabled.
+*
+* Device does not know when first one token will arrive from host. On first
+* token arrival HW generates 2 interrupts: 'in token received while FIFO empty'
+* and 'NAK'. NAK interrupt for ISOC-IN means that token has arrived and ZLP was
+* sent in response to that as there was no data in FIFO. SW is basing on this
+* interrupt to obtain frame in which token has come and then based on the
+* interval calculates next frame for transfer.
+*/
+static void dwc2_gadget_handle_nak(struct dwc2_hsotg_ep *hs_ep)
+{
+	struct dwc2_hsotg *hsotg = hs_ep->parent;
+	int dir_in = hs_ep->dir_in;
+
+	if (!dir_in || !hs_ep->isochronous)
+		return;
+
+	if (hs_ep->target_frame == TARGET_FRAME_INITIAL) {
+		hs_ep->target_frame = dwc2_hsotg_read_frameno(hsotg);
+		if (hs_ep->interval > 1) {
+			u32 ctrl = dwc2_readl(hsotg->regs +
+					      DIEPCTL(hs_ep->index));
+			if (hs_ep->target_frame & 0x1)
+				ctrl |= DXEPCTL_SETODDFR;
+			else
+				ctrl |= DXEPCTL_SETEVENFR;
+
+			dwc2_writel(ctrl, hsotg->regs + DIEPCTL(hs_ep->index));
+		}
+
+		dwc2_hsotg_complete_request(hsotg, hs_ep,
+					    get_ep_head(hs_ep), 0);
+	}
+
+	dwc2_gadget_incr_frame_num(hs_ep);
+}
+
+/**
  * dwc2_hsotg_epint - handle an in/out endpoint interrupt
  * @hsotg: The driver state
  * @idx: The index for the endpoint (0..15)
@@ -1954,7 +2217,7 @@
 	u32 ints;
 	u32 ctrl;
 
-	ints = dwc2_readl(hsotg->regs + epint_reg);
+	ints = dwc2_gadget_read_ep_interrupts(hsotg, idx, dir_in);
 	ctrl = dwc2_readl(hsotg->regs + epctl_reg);
 
 	/* Clear endpoint interrupts */
@@ -1973,11 +2236,10 @@
 	if (idx == 0 && (ints & (DXEPINT_SETUP | DXEPINT_SETUP_RCVD)))
 		ints &= ~DXEPINT_XFERCOMPL;
 
-	if (ints & DXEPINT_XFERCOMPL) {
-		hs_ep->has_correct_parity = 1;
-		if (hs_ep->isochronous && hs_ep->interval == 1)
-			dwc2_hsotg_change_ep_iso_parity(hsotg, epctl_reg);
+	if (ints & DXEPINT_STSPHSERCVD)
+		dev_dbg(hsotg->dev, "%s: StsPhseRcvd asserted\n", __func__);
 
+	if (ints & DXEPINT_XFERCOMPL) {
 		dev_dbg(hsotg->dev,
 			"%s: XferCompl: DxEPCTL=0x%08x, DXEPTSIZ=%08x\n",
 			__func__, dwc2_readl(hsotg->regs + epctl_reg),
@@ -1988,7 +2250,12 @@
 		 * at completing IN requests here
 		 */
 		if (dir_in) {
+			if (hs_ep->isochronous && hs_ep->interval > 1)
+				dwc2_gadget_incr_frame_num(hs_ep);
+
 			dwc2_hsotg_complete_in(hsotg, hs_ep);
+			if (ints & DXEPINT_NAKINTRPT)
+				ints &= ~DXEPINT_NAKINTRPT;
 
 			if (idx == 0 && !hs_ep->req)
 				dwc2_hsotg_enqueue_setup(hsotg);
@@ -1997,28 +2264,21 @@
 			 * We're using DMA, we need to fire an OutDone here
 			 * as we ignore the RXFIFO.
 			 */
+			if (hs_ep->isochronous && hs_ep->interval > 1)
+				dwc2_gadget_incr_frame_num(hs_ep);
 
 			dwc2_hsotg_handle_outdone(hsotg, idx);
 		}
 	}
 
-	if (ints & DXEPINT_EPDISBLD) {
-		dev_dbg(hsotg->dev, "%s: EPDisbld\n", __func__);
+	if (ints & DXEPINT_EPDISBLD)
+		dwc2_gadget_handle_ep_disabled(hs_ep);
 
-		if (dir_in) {
-			int epctl = dwc2_readl(hsotg->regs + epctl_reg);
+	if (ints & DXEPINT_OUTTKNEPDIS)
+		dwc2_gadget_handle_out_token_ep_disabled(hs_ep);
 
-			dwc2_hsotg_txfifo_flush(hsotg, hs_ep->fifo_index);
-
-			if ((epctl & DXEPCTL_STALL) &&
-				(epctl & DXEPCTL_EPTYPE_BULK)) {
-				int dctl = dwc2_readl(hsotg->regs + DCTL);
-
-				dctl |= DCTL_CGNPINNAK;
-				dwc2_writel(dctl, hsotg->regs + DCTL);
-			}
-		}
-	}
+	if (ints & DXEPINT_NAKINTRPT)
+		dwc2_gadget_handle_nak(hs_ep);
 
 	if (ints & DXEPINT_AHBERR)
 		dev_dbg(hsotg->dev, "%s: AHBErr\n", __func__);
@@ -2046,20 +2306,20 @@
 
 	if (dir_in && !hs_ep->isochronous) {
 		/* not sure if this is important, but we'll clear it anyway */
-		if (ints & DIEPMSK_INTKNTXFEMPMSK) {
+		if (ints & DXEPINT_INTKNTXFEMP) {
 			dev_dbg(hsotg->dev, "%s: ep%d: INTknTXFEmpMsk\n",
 				__func__, idx);
 		}
 
 		/* this probably means something bad is happening */
-		if (ints & DIEPMSK_INTKNEPMISMSK) {
+		if (ints & DXEPINT_INTKNEPMIS) {
 			dev_warn(hsotg->dev, "%s: ep%d: INTknEP\n",
 				 __func__, idx);
 		}
 
 		/* FIFO has space or is empty (see GAHBCFG) */
 		if (hsotg->dedicated_fifos &&
-		    ints & DIEPMSK_TXFIFOEMPTY) {
+		    ints & DXEPINT_TXFEMP) {
 			dev_dbg(hsotg->dev, "%s: ep%d: TxFIFOEmpty\n",
 				__func__, idx);
 			if (!using_dma(hsotg))
@@ -2322,18 +2582,16 @@
 	dwc2_writel(((hsotg->dedicated_fifos && !using_dma(hsotg)) ?
 		DIEPMSK_TXFIFOEMPTY | DIEPMSK_INTKNTXFEMPMSK : 0) |
 		DIEPMSK_EPDISBLDMSK | DIEPMSK_XFERCOMPLMSK |
-		DIEPMSK_TIMEOUTMSK | DIEPMSK_AHBERRMSK |
-		DIEPMSK_INTKNEPMISMSK,
+		DIEPMSK_TIMEOUTMSK | DIEPMSK_AHBERRMSK,
 		hsotg->regs + DIEPMSK);
 
 	/*
 	 * don't need XferCompl, we get that from RXFIFO in slave mode. In
 	 * DMA mode we may need this.
 	 */
-	dwc2_writel((using_dma(hsotg) ? (DIEPMSK_XFERCOMPLMSK |
-				    DIEPMSK_TIMEOUTMSK) : 0) |
+	dwc2_writel((using_dma(hsotg) ? (DIEPMSK_XFERCOMPLMSK) : 0) |
 		DOEPMSK_EPDISBLDMSK | DOEPMSK_AHBERRMSK |
-		DOEPMSK_SETUPMSK,
+		DOEPMSK_SETUPMSK | DOEPMSK_STSPHSERCVDMSK,
 		hsotg->regs + DOEPMSK);
 
 	dwc2_writel(0, hsotg->regs + DAINTMSK);
@@ -2414,6 +2672,85 @@
 }
 
 /**
+ * dwc2_gadget_handle_incomplete_isoc_in - handle incomplete ISO IN Interrupt.
+ * @hsotg: The device state:
+ *
+ * This interrupt indicates one of the following conditions occurred while
+ * transmitting an ISOC transaction.
+ * - Corrupted IN Token for ISOC EP.
+ * - Packet not complete in FIFO.
+ *
+ * The following actions will be taken:
+ * - Determine the EP
+ * - Disable EP; when 'Endpoint Disabled' interrupt is received Flush FIFO
+ */
+static void dwc2_gadget_handle_incomplete_isoc_in(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_hsotg_ep *hs_ep;
+	u32 epctrl;
+	u32 idx;
+
+	dev_dbg(hsotg->dev, "Incomplete isoc in interrupt received:\n");
+
+	for (idx = 1; idx <= hsotg->num_of_eps; idx++) {
+		hs_ep = hsotg->eps_in[idx];
+		epctrl = dwc2_readl(hsotg->regs + DIEPCTL(idx));
+		if ((epctrl & DXEPCTL_EPENA) && hs_ep->isochronous &&
+		    dwc2_gadget_target_frame_elapsed(hs_ep)) {
+			epctrl |= DXEPCTL_SNAK;
+			epctrl |= DXEPCTL_EPDIS;
+			dwc2_writel(epctrl, hsotg->regs + DIEPCTL(idx));
+		}
+	}
+
+	/* Clear interrupt */
+	dwc2_writel(GINTSTS_INCOMPL_SOIN, hsotg->regs + GINTSTS);
+}
+
+/**
+ * dwc2_gadget_handle_incomplete_isoc_out - handle incomplete ISO OUT Interrupt
+ * @hsotg: The device state:
+ *
+ * This interrupt indicates one of the following conditions occurred while
+ * transmitting an ISOC transaction.
+ * - Corrupted OUT Token for ISOC EP.
+ * - Packet not complete in FIFO.
+ *
+ * The following actions will be taken:
+ * - Determine the EP
+ * - Set DCTL_SGOUTNAK and unmask GOUTNAKEFF if target frame elapsed.
+ */
+static void dwc2_gadget_handle_incomplete_isoc_out(struct dwc2_hsotg *hsotg)
+{
+	u32 gintsts;
+	u32 gintmsk;
+	u32 epctrl;
+	struct dwc2_hsotg_ep *hs_ep;
+	int idx;
+
+	dev_dbg(hsotg->dev, "%s: GINTSTS_INCOMPL_SOOUT\n", __func__);
+
+	for (idx = 1; idx <= hsotg->num_of_eps; idx++) {
+		hs_ep = hsotg->eps_out[idx];
+		epctrl = dwc2_readl(hsotg->regs + DOEPCTL(idx));
+		if ((epctrl & DXEPCTL_EPENA) && hs_ep->isochronous &&
+		    dwc2_gadget_target_frame_elapsed(hs_ep)) {
+			/* Unmask GOUTNAKEFF interrupt */
+			gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
+			gintmsk |= GINTSTS_GOUTNAKEFF;
+			dwc2_writel(gintmsk, hsotg->regs + GINTMSK);
+
+			gintsts = dwc2_readl(hsotg->regs + GINTSTS);
+			if (!(gintsts & GINTSTS_GOUTNAKEFF))
+				__orr32(hsotg->regs + DCTL, DCTL_SGOUTNAK);
+		}
+	}
+
+	/* Clear interrupt */
+	dwc2_writel(GINTSTS_INCOMPL_SOOUT, hsotg->regs + GINTSTS);
+}
+
+/**
  * dwc2_hsotg_irq - handle device interrupt
  * @irq: The IRQ number triggered
  * @pw: The pw value when registered the handler.
@@ -2545,11 +2882,29 @@
 	 */
 
 	if (gintsts & GINTSTS_GOUTNAKEFF) {
-		dev_info(hsotg->dev, "GOUTNakEff triggered\n");
+		u8 idx;
+		u32 epctrl;
+		u32 gintmsk;
+		struct dwc2_hsotg_ep *hs_ep;
 
-		__orr32(hsotg->regs + DCTL, DCTL_CGOUTNAK);
+		/* Mask this interrupt */
+		gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
+		gintmsk &= ~GINTSTS_GOUTNAKEFF;
+		dwc2_writel(gintmsk, hsotg->regs + GINTMSK);
 
-		dwc2_hsotg_dump(hsotg);
+		dev_dbg(hsotg->dev, "GOUTNakEff triggered\n");
+		for (idx = 1; idx <= hsotg->num_of_eps; idx++) {
+			hs_ep = hsotg->eps_out[idx];
+			epctrl = dwc2_readl(hsotg->regs + DOEPCTL(idx));
+
+			if ((epctrl & DXEPCTL_EPENA) && hs_ep->isochronous) {
+				epctrl |= DXEPCTL_SNAK;
+				epctrl |= DXEPCTL_EPDIS;
+				dwc2_writel(epctrl, hsotg->regs + DOEPCTL(idx));
+			}
+		}
+
+		/* This interrupt bit is cleared in DXEPINT_EPDISBLD handler */
 	}
 
 	if (gintsts & GINTSTS_GINNAKEFF) {
@@ -2560,39 +2915,11 @@
 		dwc2_hsotg_dump(hsotg);
 	}
 
-	if (gintsts & GINTSTS_INCOMPL_SOIN) {
-		u32 idx, epctl_reg;
-		struct dwc2_hsotg_ep *hs_ep;
+	if (gintsts & GINTSTS_INCOMPL_SOIN)
+		dwc2_gadget_handle_incomplete_isoc_in(hsotg);
 
-		dev_dbg(hsotg->dev, "%s: GINTSTS_INCOMPL_SOIN\n", __func__);
-		for (idx = 1; idx < hsotg->num_of_eps; idx++) {
-			hs_ep = hsotg->eps_in[idx];
-
-			if (!hs_ep->isochronous || hs_ep->has_correct_parity)
-				continue;
-
-			epctl_reg = DIEPCTL(idx);
-			dwc2_hsotg_change_ep_iso_parity(hsotg, epctl_reg);
-		}
-		dwc2_writel(GINTSTS_INCOMPL_SOIN, hsotg->regs + GINTSTS);
-	}
-
-	if (gintsts & GINTSTS_INCOMPL_SOOUT) {
-		u32 idx, epctl_reg;
-		struct dwc2_hsotg_ep *hs_ep;
-
-		dev_dbg(hsotg->dev, "%s: GINTSTS_INCOMPL_SOOUT\n", __func__);
-		for (idx = 1; idx < hsotg->num_of_eps; idx++) {
-			hs_ep = hsotg->eps_out[idx];
-
-			if (!hs_ep->isochronous || hs_ep->has_correct_parity)
-				continue;
-
-			epctl_reg = DOEPCTL(idx);
-			dwc2_hsotg_change_ep_iso_parity(hsotg, epctl_reg);
-		}
-		dwc2_writel(GINTSTS_INCOMPL_SOOUT, hsotg->regs + GINTSTS);
-	}
+	if (gintsts & GINTSTS_INCOMPL_SOOUT)
+		dwc2_gadget_handle_incomplete_isoc_out(hsotg);
 
 	/*
 	 * if we've had fifo events, we should try and go around the
@@ -2624,6 +2951,7 @@
 	u32 epctrl_reg;
 	u32 epctrl;
 	u32 mps;
+	u32 mask;
 	unsigned int dir_in;
 	unsigned int i, val, size;
 	int ret = 0;
@@ -2666,15 +2994,6 @@
 	 */
 	epctrl |= DXEPCTL_USBACTEP;
 
-	/*
-	 * set the NAK status on the endpoint, otherwise we might try and
-	 * do something with data that we've yet got a request to process
-	 * since the RXFIFO will take data for an endpoint even if the
-	 * size register hasn't been set.
-	 */
-
-	epctrl |= DXEPCTL_SNAK;
-
 	/* update the endpoint state */
 	dwc2_hsotg_set_ep_maxpacket(hsotg, hs_ep->index, mps, dir_in);
 
@@ -2683,18 +3002,24 @@
 	hs_ep->periodic = 0;
 	hs_ep->halted = 0;
 	hs_ep->interval = desc->bInterval;
-	hs_ep->has_correct_parity = 0;
-
-	if (hs_ep->interval > 1 && hs_ep->mc > 1)
-		dev_err(hsotg->dev, "MC > 1 when interval is not 1\n");
 
 	switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
 	case USB_ENDPOINT_XFER_ISOC:
 		epctrl |= DXEPCTL_EPTYPE_ISO;
 		epctrl |= DXEPCTL_SETEVENFR;
 		hs_ep->isochronous = 1;
-		if (dir_in)
+		hs_ep->interval = 1 << (desc->bInterval - 1);
+		hs_ep->target_frame = TARGET_FRAME_INITIAL;
+		if (dir_in) {
 			hs_ep->periodic = 1;
+			mask = dwc2_readl(hsotg->regs + DIEPMSK);
+			mask |= DIEPMSK_NAKMSK;
+			dwc2_writel(mask, hsotg->regs + DIEPMSK);
+		} else {
+			mask = dwc2_readl(hsotg->regs + DOEPMSK);
+			mask |= DOEPMSK_OUTTKNEPDISMSK;
+			dwc2_writel(mask, hsotg->regs + DOEPMSK);
+		}
 		break;
 
 	case USB_ENDPOINT_XFER_BULK:
@@ -2705,6 +3030,9 @@
 		if (dir_in)
 			hs_ep->periodic = 1;
 
+		if (hsotg->gadget.speed == USB_SPEED_HIGH)
+			hs_ep->interval = 1 << (desc->bInterval - 1);
+
 		epctrl |= DXEPCTL_EPTYPE_INTERRUPT;
 		break;
 
@@ -2758,7 +3086,7 @@
 	}
 
 	/* for non control endpoints, set PID to D0 */
-	if (index)
+	if (index && !hs_ep->isochronous)
 		epctrl |= DXEPCTL_SETD0PID;
 
 	dev_dbg(hsotg->dev, "%s: write DxEPCTL=0x%08x\n",
@@ -2875,10 +3203,8 @@
 			dev_warn(hsotg->dev,
 				"%s: timeout DIEPINT.NAKEFF\n", __func__);
 	} else {
-		/* Clear any pending nak effect interrupt */
-		dwc2_writel(GINTSTS_GOUTNAKEFF, hsotg->regs + GINTSTS);
-
-		__orr32(hsotg->regs + DCTL, DCTL_SGOUTNAK);
+		if (!(dwc2_readl(hsotg->regs + GINTSTS) & GINTSTS_GOUTNAKEFF))
+			__orr32(hsotg->regs + DCTL, DCTL_SGOUTNAK);
 
 		/* Wait for global nak to take effect */
 		if (dwc2_hsotg_wait_bit_set(hsotg, GINTSTS,
diff --git a/drivers/usb/dwc2/hcd_queue.c b/drivers/usb/dwc2/hcd_queue.c
index b5c7793..1375435 100644
--- a/drivers/usb/dwc2/hcd_queue.c
+++ b/drivers/usb/dwc2/hcd_queue.c
@@ -367,7 +367,8 @@
  * @fmt:   The format for printf.
  * @...:   The args for printf.
  */
-static void cat_printf(char **buf, size_t *size, const char *fmt, ...)
+static __printf(3, 4)
+void cat_printf(char **buf, size_t *size, const char *fmt, ...)
 {
 	va_list args;
 	int i;
diff --git a/drivers/usb/dwc2/hw.h b/drivers/usb/dwc2/hw.h
index 281b57b..efc3bcd 100644
--- a/drivers/usb/dwc2/hw.h
+++ b/drivers/usb/dwc2/hw.h
@@ -459,6 +459,9 @@
 #define DSTS_SUSPSTS			(1 << 0)
 
 #define DIEPMSK				HSOTG_REG(0x810)
+#define DIEPMSK_NAKMSK			(1 << 13)
+#define DIEPMSK_BNAININTRMSK		(1 << 9)
+#define DIEPMSK_TXFIFOUNDRNMSK		(1 << 8)
 #define DIEPMSK_TXFIFOEMPTY		(1 << 7)
 #define DIEPMSK_INEPNAKEFFMSK		(1 << 6)
 #define DIEPMSK_INTKNEPMISMSK		(1 << 5)
@@ -470,6 +473,7 @@
 
 #define DOEPMSK				HSOTG_REG(0x814)
 #define DOEPMSK_BACK2BACKSETUP		(1 << 6)
+#define DOEPMSK_STSPHSERCVDMSK		(1 << 5)
 #define DOEPMSK_OUTTKNEPDISMSK		(1 << 4)
 #define DOEPMSK_SETUPMSK		(1 << 3)
 #define DOEPMSK_AHBERRMSK		(1 << 2)
@@ -486,6 +490,7 @@
 #define DTKNQR2				HSOTG_REG(0x824)
 #define DTKNQR3				HSOTG_REG(0x830)
 #define DTKNQR4				HSOTG_REG(0x834)
+#define DIEPEMPMSK			HSOTG_REG(0x834)
 
 #define DVBUSDIS			HSOTG_REG(0x828)
 #define DVBUSPULSE			HSOTG_REG(0x82C)
@@ -544,9 +549,18 @@
 #define DIEPINT(_a)			HSOTG_REG(0x908 + ((_a) * 0x20))
 #define DOEPINT(_a)			HSOTG_REG(0xB08 + ((_a) * 0x20))
 #define DXEPINT_SETUP_RCVD		(1 << 15)
+#define DXEPINT_NYETINTRPT		(1 << 14)
+#define DXEPINT_NAKINTRPT		(1 << 13)
+#define DXEPINT_BBLEERRINTRPT		(1 << 12)
+#define DXEPINT_PKTDRPSTS		(1 << 11)
+#define DXEPINT_BNAINTR			(1 << 9)
+#define DXEPINT_TXFIFOUNDRN		(1 << 8)
+#define DXEPINT_OUTPKTERR		(1 << 8)
+#define DXEPINT_TXFEMP			(1 << 7)
 #define DXEPINT_INEPNAKEFF		(1 << 6)
 #define DXEPINT_BACK2BACKSETUP		(1 << 6)
 #define DXEPINT_INTKNEPMIS		(1 << 5)
+#define DXEPINT_STSPHSERCVD		(1 << 5)
 #define DXEPINT_INTKNTXFEMP		(1 << 4)
 #define DXEPINT_OUTTKNEPDIS		(1 << 4)
 #define DXEPINT_TIMEOUT			(1 << 3)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index a590cd2..9466431 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -41,14 +41,13 @@
 #include <linux/usb/of.h>
 #include <linux/usb/otg.h>
 
-#include "platform_data.h"
 #include "core.h"
 #include "gadget.h"
 #include "io.h"
 
 #include "debug.h"
 
-/* -------------------------------------------------------------------------- */
+#define DWC3_DEFAULT_AUTOSUSPEND_DELAY	5000 /* ms */
 
 void dwc3_set_mode(struct dwc3 *dwc, u32 mode)
 {
@@ -149,9 +148,8 @@
 /*
  * dwc3_frame_length_adjustment - Adjusts frame length if required
  * @dwc3: Pointer to our controller context structure
- * @fladj: Value of GFLADJ_30MHZ to adjust frame length
  */
-static void dwc3_frame_length_adjustment(struct dwc3 *dwc, u32 fladj)
+static void dwc3_frame_length_adjustment(struct dwc3 *dwc)
 {
 	u32 reg;
 	u32 dft;
@@ -159,15 +157,15 @@
 	if (dwc->revision < DWC3_REVISION_250A)
 		return;
 
-	if (fladj == 0)
+	if (dwc->fladj == 0)
 		return;
 
 	reg = dwc3_readl(dwc->regs, DWC3_GFLADJ);
 	dft = reg & DWC3_GFLADJ_30MHZ_MASK;
-	if (!dev_WARN_ONCE(dwc->dev, dft == fladj,
+	if (!dev_WARN_ONCE(dwc->dev, dft == dwc->fladj,
 	    "request value same as default, ignoring\n")) {
 		reg &= ~DWC3_GFLADJ_30MHZ_MASK;
-		reg |= DWC3_GFLADJ_30MHZ_SDBND_SEL | fladj;
+		reg |= DWC3_GFLADJ_30MHZ_SDBND_SEL | dwc->fladj;
 		dwc3_writel(dwc->regs, DWC3_GFLADJ, reg);
 	}
 }
@@ -507,6 +505,21 @@
 	return 0;
 }
 
+static void dwc3_core_exit(struct dwc3 *dwc)
+{
+	dwc3_event_buffers_cleanup(dwc);
+
+	usb_phy_shutdown(dwc->usb2_phy);
+	usb_phy_shutdown(dwc->usb3_phy);
+	phy_exit(dwc->usb2_generic_phy);
+	phy_exit(dwc->usb3_generic_phy);
+
+	usb_phy_set_suspend(dwc->usb2_phy, 1);
+	usb_phy_set_suspend(dwc->usb3_phy, 1);
+	phy_power_off(dwc->usb2_generic_phy);
+	phy_power_off(dwc->usb3_generic_phy);
+}
+
 /**
  * dwc3_core_init - Low-level initialization of DWC3 Core
  * @dwc: Pointer to our controller context structure
@@ -556,6 +569,10 @@
 	if (ret)
 		goto err0;
 
+	ret = dwc3_phy_setup(dwc);
+	if (ret)
+		goto err0;
+
 	reg = dwc3_readl(dwc->regs, DWC3_GCTL);
 	reg &= ~DWC3_GCTL_SCALEDOWN_MASK;
 
@@ -622,22 +639,45 @@
 	if (dwc->revision < DWC3_REVISION_190A)
 		reg |= DWC3_GCTL_U2RSTECN;
 
-	dwc3_core_num_eps(dwc);
-
 	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
 
-	ret = dwc3_alloc_scratch_buffers(dwc);
-	if (ret)
-		goto err1;
+	dwc3_core_num_eps(dwc);
 
 	ret = dwc3_setup_scratch_buffers(dwc);
 	if (ret)
+		goto err1;
+
+	/* Adjust Frame Length */
+	dwc3_frame_length_adjustment(dwc);
+
+	usb_phy_set_suspend(dwc->usb2_phy, 0);
+	usb_phy_set_suspend(dwc->usb3_phy, 0);
+	ret = phy_power_on(dwc->usb2_generic_phy);
+	if (ret < 0)
 		goto err2;
 
+	ret = phy_power_on(dwc->usb3_generic_phy);
+	if (ret < 0)
+		goto err3;
+
+	ret = dwc3_event_buffers_setup(dwc);
+	if (ret) {
+		dev_err(dwc->dev, "failed to setup event buffers\n");
+		goto err4;
+	}
+
 	return 0;
 
+err4:
+	phy_power_off(dwc->usb2_generic_phy);
+
+err3:
+	phy_power_off(dwc->usb3_generic_phy);
+
 err2:
-	dwc3_free_scratch_buffers(dwc);
+	usb_phy_set_suspend(dwc->usb2_phy, 1);
+	usb_phy_set_suspend(dwc->usb3_phy, 1);
+	dwc3_core_exit(dwc);
 
 err1:
 	usb_phy_shutdown(dwc->usb2_phy);
@@ -649,15 +689,6 @@
 	return ret;
 }
 
-static void dwc3_core_exit(struct dwc3 *dwc)
-{
-	dwc3_free_scratch_buffers(dwc);
-	usb_phy_shutdown(dwc->usb2_phy);
-	usb_phy_shutdown(dwc->usb3_phy);
-	phy_exit(dwc->usb2_generic_phy);
-	phy_exit(dwc->usb3_generic_phy);
-}
-
 static int dwc3_core_get_phy(struct dwc3 *dwc)
 {
 	struct device		*dev = dwc->dev;
@@ -735,7 +766,8 @@
 		dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE);
 		ret = dwc3_gadget_init(dwc);
 		if (ret) {
-			dev_err(dev, "failed to initialize gadget\n");
+			if (ret != -EPROBE_DEFER)
+				dev_err(dev, "failed to initialize gadget\n");
 			return ret;
 		}
 		break;
@@ -743,7 +775,8 @@
 		dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_HOST);
 		ret = dwc3_host_init(dwc);
 		if (ret) {
-			dev_err(dev, "failed to initialize host\n");
+			if (ret != -EPROBE_DEFER)
+				dev_err(dev, "failed to initialize host\n");
 			return ret;
 		}
 		break;
@@ -751,13 +784,15 @@
 		dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG);
 		ret = dwc3_host_init(dwc);
 		if (ret) {
-			dev_err(dev, "failed to initialize host\n");
+			if (ret != -EPROBE_DEFER)
+				dev_err(dev, "failed to initialize host\n");
 			return ret;
 		}
 
 		ret = dwc3_gadget_init(dwc);
 		if (ret) {
-			dev_err(dev, "failed to initialize gadget\n");
+			if (ret != -EPROBE_DEFER)
+				dev_err(dev, "failed to initialize gadget\n");
 			return ret;
 		}
 		break;
@@ -793,13 +828,11 @@
 static int dwc3_probe(struct platform_device *pdev)
 {
 	struct device		*dev = &pdev->dev;
-	struct dwc3_platform_data *pdata = dev_get_platdata(dev);
 	struct resource		*res;
 	struct dwc3		*dwc;
 	u8			lpm_nyet_threshold;
 	u8			tx_de_emphasis;
 	u8			hird_threshold;
-	u32			fladj = 0;
 
 	int			ret;
 
@@ -814,16 +847,6 @@
 	dwc->mem = mem;
 	dwc->dev = dev;
 
-	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (!res) {
-		dev_err(dev, "missing IRQ\n");
-		return -ENODEV;
-	}
-	dwc->xhci_resources[1].start = res->start;
-	dwc->xhci_resources[1].end = res->end;
-	dwc->xhci_resources[1].flags = res->flags;
-	dwc->xhci_resources[1].name = res->name;
-
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
 		dev_err(dev, "missing memory resource\n");
@@ -909,40 +932,7 @@
 	device_property_read_string(dev, "snps,hsphy_interface",
 				    &dwc->hsphy_interface);
 	device_property_read_u32(dev, "snps,quirk-frame-length-adjustment",
-				 &fladj);
-
-	if (pdata) {
-		dwc->maximum_speed = pdata->maximum_speed;
-		dwc->has_lpm_erratum = pdata->has_lpm_erratum;
-		if (pdata->lpm_nyet_threshold)
-			lpm_nyet_threshold = pdata->lpm_nyet_threshold;
-		dwc->is_utmi_l1_suspend = pdata->is_utmi_l1_suspend;
-		if (pdata->hird_threshold)
-			hird_threshold = pdata->hird_threshold;
-
-		dwc->usb3_lpm_capable = pdata->usb3_lpm_capable;
-		dwc->dr_mode = pdata->dr_mode;
-
-		dwc->disable_scramble_quirk = pdata->disable_scramble_quirk;
-		dwc->u2exit_lfps_quirk = pdata->u2exit_lfps_quirk;
-		dwc->u2ss_inp3_quirk = pdata->u2ss_inp3_quirk;
-		dwc->req_p1p2p3_quirk = pdata->req_p1p2p3_quirk;
-		dwc->del_p1p2p3_quirk = pdata->del_p1p2p3_quirk;
-		dwc->del_phy_power_chg_quirk = pdata->del_phy_power_chg_quirk;
-		dwc->lfps_filter_quirk = pdata->lfps_filter_quirk;
-		dwc->rx_detect_poll_quirk = pdata->rx_detect_poll_quirk;
-		dwc->dis_u3_susphy_quirk = pdata->dis_u3_susphy_quirk;
-		dwc->dis_u2_susphy_quirk = pdata->dis_u2_susphy_quirk;
-		dwc->dis_enblslpm_quirk = pdata->dis_enblslpm_quirk;
-		dwc->dis_rxdet_inp3_quirk = pdata->dis_rxdet_inp3_quirk;
-
-		dwc->tx_de_emphasis_quirk = pdata->tx_de_emphasis_quirk;
-		if (pdata->tx_de_emphasis)
-			tx_de_emphasis = pdata->tx_de_emphasis;
-
-		dwc->hsphy_interface = pdata->hsphy_interface;
-		fladj = pdata->fladj_value;
-	}
+				 &dwc->fladj);
 
 	dwc->lpm_nyet_threshold = lpm_nyet_threshold;
 	dwc->tx_de_emphasis = tx_de_emphasis;
@@ -953,10 +943,6 @@
 	platform_set_drvdata(pdev, dwc);
 	dwc3_cache_hwparams(dwc);
 
-	ret = dwc3_phy_setup(dwc);
-	if (ret)
-		goto err0;
-
 	ret = dwc3_core_get_phy(dwc);
 	if (ret)
 		goto err0;
@@ -969,29 +955,43 @@
 		dma_set_coherent_mask(dev, dev->parent->coherent_dma_mask);
 	}
 
+	pm_runtime_set_active(dev);
+	pm_runtime_use_autosuspend(dev);
+	pm_runtime_set_autosuspend_delay(dev, DWC3_DEFAULT_AUTOSUSPEND_DELAY);
 	pm_runtime_enable(dev);
-	pm_runtime_get_sync(dev);
+	ret = pm_runtime_get_sync(dev);
+	if (ret < 0)
+		goto err1;
+
 	pm_runtime_forbid(dev);
 
 	ret = dwc3_alloc_event_buffers(dwc, DWC3_EVENT_BUFFERS_SIZE);
 	if (ret) {
 		dev_err(dwc->dev, "failed to allocate event buffers\n");
 		ret = -ENOMEM;
-		goto err1;
+		goto err2;
 	}
 
-	if (IS_ENABLED(CONFIG_USB_DWC3_HOST))
+	if (IS_ENABLED(CONFIG_USB_DWC3_HOST) &&
+			(dwc->dr_mode == USB_DR_MODE_OTG ||
+					dwc->dr_mode == USB_DR_MODE_UNKNOWN))
 		dwc->dr_mode = USB_DR_MODE_HOST;
-	else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET))
+	else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET) &&
+			(dwc->dr_mode == USB_DR_MODE_OTG ||
+					dwc->dr_mode == USB_DR_MODE_UNKNOWN))
 		dwc->dr_mode = USB_DR_MODE_PERIPHERAL;
 
 	if (dwc->dr_mode == USB_DR_MODE_UNKNOWN)
 		dwc->dr_mode = USB_DR_MODE_OTG;
 
+	ret = dwc3_alloc_scratch_buffers(dwc);
+	if (ret)
+		goto err3;
+
 	ret = dwc3_core_init(dwc);
 	if (ret) {
 		dev_err(dev, "failed to initialize core\n");
-		goto err1;
+		goto err4;
 	}
 
 	/* Check the maximum_speed parameter */
@@ -1021,31 +1021,12 @@
 		break;
 	}
 
-	/* Adjust Frame Length */
-	dwc3_frame_length_adjustment(dwc, fladj);
-
-	usb_phy_set_suspend(dwc->usb2_phy, 0);
-	usb_phy_set_suspend(dwc->usb3_phy, 0);
-	ret = phy_power_on(dwc->usb2_generic_phy);
-	if (ret < 0)
-		goto err2;
-
-	ret = phy_power_on(dwc->usb3_generic_phy);
-	if (ret < 0)
-		goto err3;
-
-	ret = dwc3_event_buffers_setup(dwc);
-	if (ret) {
-		dev_err(dwc->dev, "failed to setup event buffers\n");
-		goto err4;
-	}
-
 	ret = dwc3_core_init_mode(dwc);
 	if (ret)
 		goto err5;
 
 	dwc3_debugfs_init(dwc);
-	pm_runtime_allow(dev);
+	pm_runtime_put(dev);
 
 	return 0;
 
@@ -1053,20 +1034,19 @@
 	dwc3_event_buffers_cleanup(dwc);
 
 err4:
-	phy_power_off(dwc->usb3_generic_phy);
+	dwc3_free_scratch_buffers(dwc);
 
 err3:
-	phy_power_off(dwc->usb2_generic_phy);
-
-err2:
-	usb_phy_set_suspend(dwc->usb2_phy, 1);
-	usb_phy_set_suspend(dwc->usb3_phy, 1);
-	dwc3_core_exit(dwc);
-
-err1:
 	dwc3_free_event_buffers(dwc);
 	dwc3_ulpi_exit(dwc);
 
+err2:
+	pm_runtime_allow(&pdev->dev);
+
+err1:
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
 err0:
 	/*
 	 * restore res->start back to its original value so that, in case the
@@ -1083,6 +1063,7 @@
 	struct dwc3	*dwc = platform_get_drvdata(pdev);
 	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 
+	pm_runtime_get_sync(&pdev->dev);
 	/*
 	 * restore res->start back to its original value so that, in case the
 	 * probe is deferred, we don't end up getting error in request the
@@ -1092,54 +1073,161 @@
 
 	dwc3_debugfs_exit(dwc);
 	dwc3_core_exit_mode(dwc);
-	dwc3_event_buffers_cleanup(dwc);
-	dwc3_free_event_buffers(dwc);
-
-	usb_phy_set_suspend(dwc->usb2_phy, 1);
-	usb_phy_set_suspend(dwc->usb3_phy, 1);
-	phy_power_off(dwc->usb2_generic_phy);
-	phy_power_off(dwc->usb3_generic_phy);
 
 	dwc3_core_exit(dwc);
 	dwc3_ulpi_exit(dwc);
 
 	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_allow(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 
+	dwc3_free_event_buffers(dwc);
+	dwc3_free_scratch_buffers(dwc);
+
 	return 0;
 }
 
+#ifdef CONFIG_PM
+static int dwc3_suspend_common(struct dwc3 *dwc)
+{
+	unsigned long	flags;
+
+	switch (dwc->dr_mode) {
+	case USB_DR_MODE_PERIPHERAL:
+	case USB_DR_MODE_OTG:
+		spin_lock_irqsave(&dwc->lock, flags);
+		dwc3_gadget_suspend(dwc);
+		spin_unlock_irqrestore(&dwc->lock, flags);
+		break;
+	case USB_DR_MODE_HOST:
+	default:
+		/* do nothing */
+		break;
+	}
+
+	dwc3_core_exit(dwc);
+
+	return 0;
+}
+
+static int dwc3_resume_common(struct dwc3 *dwc)
+{
+	unsigned long	flags;
+	int		ret;
+
+	ret = dwc3_core_init(dwc);
+	if (ret)
+		return ret;
+
+	switch (dwc->dr_mode) {
+	case USB_DR_MODE_PERIPHERAL:
+	case USB_DR_MODE_OTG:
+		spin_lock_irqsave(&dwc->lock, flags);
+		dwc3_gadget_resume(dwc);
+		spin_unlock_irqrestore(&dwc->lock, flags);
+		/* FALLTHROUGH */
+	case USB_DR_MODE_HOST:
+	default:
+		/* do nothing */
+		break;
+	}
+
+	return 0;
+}
+
+static int dwc3_runtime_checks(struct dwc3 *dwc)
+{
+	switch (dwc->dr_mode) {
+	case USB_DR_MODE_PERIPHERAL:
+	case USB_DR_MODE_OTG:
+		if (dwc->connected)
+			return -EBUSY;
+		break;
+	case USB_DR_MODE_HOST:
+	default:
+		/* do nothing */
+		break;
+	}
+
+	return 0;
+}
+
+static int dwc3_runtime_suspend(struct device *dev)
+{
+	struct dwc3     *dwc = dev_get_drvdata(dev);
+	int		ret;
+
+	if (dwc3_runtime_checks(dwc))
+		return -EBUSY;
+
+	ret = dwc3_suspend_common(dwc);
+	if (ret)
+		return ret;
+
+	device_init_wakeup(dev, true);
+
+	return 0;
+}
+
+static int dwc3_runtime_resume(struct device *dev)
+{
+	struct dwc3     *dwc = dev_get_drvdata(dev);
+	int		ret;
+
+	device_init_wakeup(dev, false);
+
+	ret = dwc3_resume_common(dwc);
+	if (ret)
+		return ret;
+
+	switch (dwc->dr_mode) {
+	case USB_DR_MODE_PERIPHERAL:
+	case USB_DR_MODE_OTG:
+		dwc3_gadget_process_pending_events(dwc);
+		break;
+	case USB_DR_MODE_HOST:
+	default:
+		/* do nothing */
+		break;
+	}
+
+	pm_runtime_mark_last_busy(dev);
+
+	return 0;
+}
+
+static int dwc3_runtime_idle(struct device *dev)
+{
+	struct dwc3     *dwc = dev_get_drvdata(dev);
+
+	switch (dwc->dr_mode) {
+	case USB_DR_MODE_PERIPHERAL:
+	case USB_DR_MODE_OTG:
+		if (dwc3_runtime_checks(dwc))
+			return -EBUSY;
+		break;
+	case USB_DR_MODE_HOST:
+	default:
+		/* do nothing */
+		break;
+	}
+
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_autosuspend(dev);
+
+	return 0;
+}
+#endif /* CONFIG_PM */
+
 #ifdef CONFIG_PM_SLEEP
 static int dwc3_suspend(struct device *dev)
 {
 	struct dwc3	*dwc = dev_get_drvdata(dev);
-	unsigned long	flags;
+	int		ret;
 
-	spin_lock_irqsave(&dwc->lock, flags);
-
-	switch (dwc->dr_mode) {
-	case USB_DR_MODE_PERIPHERAL:
-	case USB_DR_MODE_OTG:
-		dwc3_gadget_suspend(dwc);
-		/* FALLTHROUGH */
-	case USB_DR_MODE_HOST:
-	default:
-		dwc3_event_buffers_cleanup(dwc);
-		break;
-	}
-
-	dwc->gctl = dwc3_readl(dwc->regs, DWC3_GCTL);
-	spin_unlock_irqrestore(&dwc->lock, flags);
-
-	usb_phy_shutdown(dwc->usb3_phy);
-	usb_phy_shutdown(dwc->usb2_phy);
-	phy_exit(dwc->usb2_generic_phy);
-	phy_exit(dwc->usb3_generic_phy);
-
-	usb_phy_set_suspend(dwc->usb2_phy, 1);
-	usb_phy_set_suspend(dwc->usb3_phy, 1);
-	WARN_ON(phy_power_off(dwc->usb2_generic_phy) < 0);
-	WARN_ON(phy_power_off(dwc->usb3_generic_phy) < 0);
+	ret = dwc3_suspend_common(dwc);
+	if (ret)
+		return ret;
 
 	pinctrl_pm_select_sleep_state(dev);
 
@@ -1149,76 +1237,28 @@
 static int dwc3_resume(struct device *dev)
 {
 	struct dwc3	*dwc = dev_get_drvdata(dev);
-	unsigned long	flags;
 	int		ret;
 
 	pinctrl_pm_select_default_state(dev);
 
-	usb_phy_set_suspend(dwc->usb2_phy, 0);
-	usb_phy_set_suspend(dwc->usb3_phy, 0);
-	ret = phy_power_on(dwc->usb2_generic_phy);
-	if (ret < 0)
+	ret = dwc3_resume_common(dwc);
+	if (ret)
 		return ret;
 
-	ret = phy_power_on(dwc->usb3_generic_phy);
-	if (ret < 0)
-		goto err_usb2phy_power;
-
-	usb_phy_init(dwc->usb3_phy);
-	usb_phy_init(dwc->usb2_phy);
-	ret = phy_init(dwc->usb2_generic_phy);
-	if (ret < 0)
-		goto err_usb3phy_power;
-
-	ret = phy_init(dwc->usb3_generic_phy);
-	if (ret < 0)
-		goto err_usb2phy_init;
-
-	spin_lock_irqsave(&dwc->lock, flags);
-
-	dwc3_event_buffers_setup(dwc);
-	dwc3_writel(dwc->regs, DWC3_GCTL, dwc->gctl);
-
-	switch (dwc->dr_mode) {
-	case USB_DR_MODE_PERIPHERAL:
-	case USB_DR_MODE_OTG:
-		dwc3_gadget_resume(dwc);
-		/* FALLTHROUGH */
-	case USB_DR_MODE_HOST:
-	default:
-		/* do nothing */
-		break;
-	}
-
-	spin_unlock_irqrestore(&dwc->lock, flags);
-
 	pm_runtime_disable(dev);
 	pm_runtime_set_active(dev);
 	pm_runtime_enable(dev);
 
 	return 0;
-
-err_usb2phy_init:
-	phy_exit(dwc->usb2_generic_phy);
-
-err_usb3phy_power:
-	phy_power_off(dwc->usb3_generic_phy);
-
-err_usb2phy_power:
-	phy_power_off(dwc->usb2_generic_phy);
-
-	return ret;
 }
+#endif /* CONFIG_PM_SLEEP */
 
 static const struct dev_pm_ops dwc3_dev_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(dwc3_suspend, dwc3_resume)
+	SET_RUNTIME_PM_OPS(dwc3_runtime_suspend, dwc3_runtime_resume,
+			dwc3_runtime_idle)
 };
 
-#define DWC3_PM_OPS	&(dwc3_dev_pm_ops)
-#else
-#define DWC3_PM_OPS	NULL
-#endif
-
 #ifdef CONFIG_OF
 static const struct of_device_id of_dwc3_match[] = {
 	{
@@ -1250,7 +1290,7 @@
 		.name	= "dwc3",
 		.of_match_table	= of_match_ptr(of_dwc3_match),
 		.acpi_match_table = ACPI_PTR(dwc3_acpi_match),
-		.pm	= DWC3_PM_OPS,
+		.pm	= &dwc3_dev_pm_ops,
 	},
 };
 
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 6540506..45d6de5 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -86,6 +86,7 @@
 #define DWC3_GCTL		0xc110
 #define DWC3_GEVTEN		0xc114
 #define DWC3_GSTS		0xc118
+#define DWC3_GUCTL1		0xc11c
 #define DWC3_GSNPSID		0xc120
 #define DWC3_GGPIO		0xc124
 #define DWC3_GUID		0xc128
@@ -138,10 +139,12 @@
 #define DWC3_DGCMDPAR		0xc710
 #define DWC3_DGCMD		0xc714
 #define DWC3_DALEPENA		0xc720
-#define DWC3_DEPCMDPAR2(n)	(0xc800 + (n * 0x10))
-#define DWC3_DEPCMDPAR1(n)	(0xc804 + (n * 0x10))
-#define DWC3_DEPCMDPAR0(n)	(0xc808 + (n * 0x10))
-#define DWC3_DEPCMD(n)		(0xc80c + (n * 0x10))
+
+#define DWC3_DEP_BASE(n)	(0xc800 + (n * 0x10))
+#define DWC3_DEPCMDPAR2		0x00
+#define DWC3_DEPCMDPAR1		0x04
+#define DWC3_DEPCMDPAR0		0x08
+#define DWC3_DEPCMD		0x0c
 
 /* OTG Registers */
 #define DWC3_OCFG		0xcc00
@@ -231,6 +234,14 @@
 #define DWC3_GEVNTSIZ_INTMASK		(1 << 31)
 #define DWC3_GEVNTSIZ_SIZE(n)		((n) & 0xffff)
 
+/* Global HWPARAMS0 Register */
+#define DWC3_GHWPARAMS0_USB3_MODE(n)	((n) & 0x3)
+#define DWC3_GHWPARAMS0_MBUS_TYPE(n)	(((n) >> 3) & 0x7)
+#define DWC3_GHWPARAMS0_SBUS_TYPE(n)	(((n) >> 6) & 0x3)
+#define DWC3_GHWPARAMS0_MDWIDTH(n)	(((n) >> 8) & 0xff)
+#define DWC3_GHWPARAMS0_SDWIDTH(n)	(((n) >> 16) & 0xff)
+#define DWC3_GHWPARAMS0_AWIDTH(n)	(((n) >> 24) & 0xff)
+
 /* Global HWPARAMS1 Register */
 #define DWC3_GHWPARAMS1_EN_PWROPT(n)	(((n) & (3 << 24)) >> 24)
 #define DWC3_GHWPARAMS1_EN_PWROPT_NO	0
@@ -260,6 +271,10 @@
 /* Global HWPARAMS6 Register */
 #define DWC3_GHWPARAMS6_EN_FPGA			(1 << 7)
 
+/* Global HWPARAMS7 Register */
+#define DWC3_GHWPARAMS7_RAM1_DEPTH(n)	((n) & 0xffff)
+#define DWC3_GHWPARAMS7_RAM2_DEPTH(n)	(((n) >> 16) & 0xffff)
+
 /* Global Frame Length Adjustment Register */
 #define DWC3_GFLADJ_30MHZ_SDBND_SEL		(1 << 7)
 #define DWC3_GFLADJ_30MHZ_MASK			0x3f
@@ -468,6 +483,8 @@
  * @endpoint: usb endpoint
  * @pending_list: list of pending requests for this endpoint
  * @started_list: list of started requests on this endpoint
+ * @lock: spinlock for endpoint request queue traversal
+ * @regs: pointer to first endpoint register
  * @trb_pool: array of transaction buffers
  * @trb_pool_dma: dma address of @trb_pool
  * @trb_enqueue: enqueue 'pointer' into TRB array
@@ -480,6 +497,8 @@
  * @type: set to bmAttributes & USB_ENDPOINT_XFERTYPE_MASK
  * @resource_index: Resource transfer index
  * @interval: the interval on which the ISOC transfer is started
+ * @allocated_requests: number of requests allocated
+ * @queued_requests: number of requests queued for transfer
  * @name: a human readable name e.g. ep1out-bulk
  * @direction: true for TX, false for RX
  * @stream_capable: true when streams are enabled
@@ -489,6 +508,9 @@
 	struct list_head	pending_list;
 	struct list_head	started_list;
 
+	spinlock_t		lock;
+	void __iomem		*regs;
+
 	struct dwc3_trb		*trb_pool;
 	dma_addr_t		trb_pool_dma;
 	const struct usb_ss_ep_comp_descriptor *comp_desc;
@@ -521,6 +543,8 @@
 	u8			number;
 	u8			type;
 	u8			resource_index;
+	u32			allocated_requests;
+	u32			queued_requests;
 	u32			interval;
 
 	char			name[20];
@@ -712,6 +736,8 @@
  * @gadget_driver: pointer to the gadget driver
  * @regs: base address for our registers
  * @regs_size: address space size
+ * @fladj: frame length adjustment
+ * @irq_gadget: peripheral controller's IRQ number
  * @nr_scratch: number of scratch buffers
  * @u1u2: only used on revisions <1.83a for workaround
  * @maximum_speed: maximum speed requested (mainly for testing purposes)
@@ -744,6 +770,7 @@
  * @lpm_nyet_threshold: LPM NYET response threshold
  * @hird_threshold: HIRD threshold
  * @hsphy_interface: "utmi" or "ulpi"
+ * @connected: true when we're connected to a host, false otherwise
  * @delayed_status: true when gadget driver asks for delayed status
  * @ep0_bounced: true when we used bounce buffer
  * @ep0_expect_in: true when we expect a DATA IN transfer
@@ -754,6 +781,7 @@
  * 	0	- utmi_sleep_n
  * 	1	- utmi_l1_suspend_n
  * @is_fpga: true when we are using the FPGA board
+ * @pending_events: true when we have pending IRQs to be handled
  * @pullups_connected: true when Run/Stop bit is set
  * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround
  * @start_config_issued: true when StartConfig command has been issued
@@ -818,10 +846,8 @@
 
 	enum usb_dr_mode	dr_mode;
 
-	/* used for suspend/resume */
-	u32			dcfg;
-	u32			gctl;
-
+	u32			fladj;
+	u32			irq_gadget;
 	u32			nr_scratch;
 	u32			u1u2;
 	u32			maximum_speed;
@@ -860,7 +886,7 @@
  * just so dwc31 revisions are always larger than dwc3.
  */
 #define DWC3_REVISION_IS_DWC31		0x80000000
-#define DWC3_USB31_REVISION_110A	(0x3131302a | DWC3_REVISION_IS_USB31)
+#define DWC3_USB31_REVISION_110A	(0x3131302a | DWC3_REVISION_IS_DWC31)
 
 	enum dwc3_ep0_next	ep0_next_event;
 	enum dwc3_ep0_state	ep0state;
@@ -890,6 +916,7 @@
 
 	const char		*hsphy_interface;
 
+	unsigned		connected:1;
 	unsigned		delayed_status:1;
 	unsigned		ep0_bounced:1;
 	unsigned		ep0_expect_in:1;
@@ -897,6 +924,7 @@
 	unsigned		has_lpm_erratum:1;
 	unsigned		is_utmi_l1_suspend:1;
 	unsigned		is_fpga:1;
+	unsigned		pending_events:1;
 	unsigned		pullups_connected:1;
 	unsigned		setup_packet_pending:1;
 	unsigned		three_stage_setup:1;
@@ -1094,8 +1122,8 @@
 int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode);
 int dwc3_gadget_get_link_state(struct dwc3 *dwc);
 int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state);
-int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
-		unsigned cmd, struct dwc3_gadget_ep_cmd_params *params);
+int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd,
+		struct dwc3_gadget_ep_cmd_params *params);
 int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned cmd, u32 param);
 #else
 static inline int dwc3_gadget_init(struct dwc3 *dwc)
@@ -1110,8 +1138,8 @@
 		enum dwc3_link_state state)
 { return 0; }
 
-static inline int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
-		unsigned cmd, struct dwc3_gadget_ep_cmd_params *params)
+static inline int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd,
+		struct dwc3_gadget_ep_cmd_params *params)
 { return 0; }
 static inline int dwc3_send_gadget_generic_command(struct dwc3 *dwc,
 		int cmd, u32 param)
@@ -1122,6 +1150,7 @@
 #if !IS_ENABLED(CONFIG_USB_DWC3_HOST)
 int dwc3_gadget_suspend(struct dwc3 *dwc);
 int dwc3_gadget_resume(struct dwc3 *dwc);
+void dwc3_gadget_process_pending_events(struct dwc3 *dwc);
 #else
 static inline int dwc3_gadget_suspend(struct dwc3 *dwc)
 {
@@ -1132,6 +1161,10 @@
 {
 	return 0;
 }
+
+static inline void dwc3_gadget_process_pending_events(struct dwc3 *dwc)
+{
+}
 #endif /* !IS_ENABLED(CONFIG_USB_DWC3_HOST) */
 
 #if IS_ENABLED(CONFIG_USB_DWC3_ULPI)
diff --git a/drivers/usb/dwc3/debug.h b/drivers/usb/dwc3/debug.h
index 71e3180..22dfc3d 100644
--- a/drivers/usb/dwc3/debug.h
+++ b/drivers/usb/dwc3/debug.h
@@ -128,56 +128,112 @@
  * dwc3_gadget_event_string - returns event name
  * @event: the event code
  */
-static inline const char *dwc3_gadget_event_string(u8 event)
+static inline const char *
+dwc3_gadget_event_string(const struct dwc3_event_devt *event)
 {
-	switch (event) {
+	static char str[256];
+	enum dwc3_link_state state = event->event_info & DWC3_LINK_STATE_MASK;
+
+	switch (event->type) {
 	case DWC3_DEVICE_EVENT_DISCONNECT:
-		return "Disconnect";
+		sprintf(str, "Disconnect: [%s]",
+				dwc3_gadget_link_string(state));
+		break;
 	case DWC3_DEVICE_EVENT_RESET:
-		return "Reset";
+		sprintf(str, "Reset [%s]", dwc3_gadget_link_string(state));
+		break;
 	case DWC3_DEVICE_EVENT_CONNECT_DONE:
-		return "Connection Done";
+		sprintf(str, "Connection Done [%s]",
+				dwc3_gadget_link_string(state));
+		break;
 	case DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE:
-		return "Link Status Change";
+		sprintf(str, "Link Change [%s]",
+				dwc3_gadget_link_string(state));
+		break;
 	case DWC3_DEVICE_EVENT_WAKEUP:
-		return "WakeUp";
+		sprintf(str, "WakeUp [%s]", dwc3_gadget_link_string(state));
+		break;
 	case DWC3_DEVICE_EVENT_EOPF:
-		return "End-Of-Frame";
+		sprintf(str, "End-Of-Frame [%s]",
+				dwc3_gadget_link_string(state));
+		break;
 	case DWC3_DEVICE_EVENT_SOF:
-		return "Start-Of-Frame";
+		sprintf(str, "Start-Of-Frame [%s]",
+				dwc3_gadget_link_string(state));
+		break;
 	case DWC3_DEVICE_EVENT_ERRATIC_ERROR:
-		return "Erratic Error";
+		sprintf(str, "Erratic Error [%s]",
+				dwc3_gadget_link_string(state));
+		break;
 	case DWC3_DEVICE_EVENT_CMD_CMPL:
-		return "Command Complete";
+		sprintf(str, "Command Complete [%s]",
+				dwc3_gadget_link_string(state));
+		break;
 	case DWC3_DEVICE_EVENT_OVERFLOW:
-		return "Overflow";
+		sprintf(str, "Overflow [%s]", dwc3_gadget_link_string(state));
+		break;
+	default:
+		sprintf(str, "UNKNOWN");
 	}
 
-	return "UNKNOWN";
+	return str;
 }
 
 /**
  * dwc3_ep_event_string - returns event name
  * @event: then event code
  */
-static inline const char *dwc3_ep_event_string(u8 event)
+static inline const char *
+dwc3_ep_event_string(const struct dwc3_event_depevt *event)
 {
-	switch (event) {
+	u8 epnum = event->endpoint_number;
+	static char str[256];
+	int status;
+	int ret;
+
+	ret = sprintf(str, "ep%d%s: ", epnum >> 1,
+			(epnum & 1) ? "in" : "in");
+	if (ret < 0)
+		return "UNKNOWN";
+
+	switch (event->endpoint_event) {
 	case DWC3_DEPEVT_XFERCOMPLETE:
-		return "Transfer Complete";
+		strcat(str, "Transfer Complete");
+		break;
 	case DWC3_DEPEVT_XFERINPROGRESS:
-		return "Transfer In-Progress";
+		strcat(str, "Transfer In-Progress");
+		break;
 	case DWC3_DEPEVT_XFERNOTREADY:
-		return "Transfer Not Ready";
+		strcat(str, "Transfer Not Ready");
+		status = event->status & DEPEVT_STATUS_TRANSFER_ACTIVE;
+		strcat(str, status ? " (Active)" : " (Not Active)");
+		break;
 	case DWC3_DEPEVT_RXTXFIFOEVT:
-		return "FIFO";
+		strcat(str, "FIFO");
+		break;
 	case DWC3_DEPEVT_STREAMEVT:
-		return "Stream";
+		status = event->status;
+
+		switch (status) {
+		case DEPEVT_STREAMEVT_FOUND:
+			sprintf(str + ret, " Stream %d Found",
+					event->parameters);
+			break;
+		case DEPEVT_STREAMEVT_NOTFOUND:
+		default:
+			strcat(str, " Stream Not Found");
+			break;
+		}
+
+		break;
 	case DWC3_DEPEVT_EPCMDCMPLT:
-		return "Endpoint Command Complete";
+		strcat(str, "Endpoint Command Complete");
+		break;
+	default:
+		sprintf(str, "UNKNOWN");
 	}
 
-	return "UNKNOWN";
+	return str;
 }
 
 /**
@@ -214,6 +270,46 @@
 	}
 }
 
+static inline const char *dwc3_decode_event(u32 event)
+{
+	const union dwc3_event evt = (union dwc3_event) event;
+
+	if (evt.type.is_devspec)
+		return dwc3_gadget_event_string(&evt.devt);
+	else
+		return dwc3_ep_event_string(&evt.depevt);
+}
+
+static inline const char *dwc3_ep_cmd_status_string(int status)
+{
+	switch (status) {
+	case -ETIMEDOUT:
+		return "Timed Out";
+	case 0:
+		return "Successful";
+	case DEPEVT_TRANSFER_NO_RESOURCE:
+		return "No Resource";
+	case DEPEVT_TRANSFER_BUS_EXPIRY:
+		return "Bus Expiry";
+	default:
+		return "UNKNOWN";
+	}
+}
+
+static inline const char *dwc3_gadget_generic_cmd_status_string(int status)
+{
+	switch (status) {
+	case -ETIMEDOUT:
+		return "Timed Out";
+	case 0:
+		return "Successful";
+	case 1:
+		return "Error";
+	default:
+		return "UNKNOWN";
+	}
+}
+
 void dwc3_trace(void (*trace)(struct va_format *), const char *fmt, ...);
 
 #ifdef CONFIG_DEBUG_FS
diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c
index b1dd3c6..31926dd 100644
--- a/drivers/usb/dwc3/debugfs.c
+++ b/drivers/usb/dwc3/debugfs.c
@@ -36,9 +36,32 @@
 #define dump_register(nm)				\
 {							\
 	.name	= __stringify(nm),			\
-	.offset	= DWC3_ ##nm - DWC3_GLOBALS_REGS_START,	\
+	.offset	= DWC3_ ##nm,				\
 }
 
+#define dump_ep_register_set(n)			\
+	{					\
+		.name = "DEPCMDPAR2("__stringify(n)")",	\
+		.offset = DWC3_DEP_BASE(n) +	\
+			DWC3_DEPCMDPAR2,	\
+	},					\
+	{					\
+		.name = "DEPCMDPAR1("__stringify(n)")",	\
+		.offset = DWC3_DEP_BASE(n) +	\
+			DWC3_DEPCMDPAR1,	\
+	},					\
+	{					\
+		.name = "DEPCMDPAR0("__stringify(n)")",	\
+		.offset = DWC3_DEP_BASE(n) +	\
+			DWC3_DEPCMDPAR0,	\
+	},					\
+	{					\
+		.name = "DEPCMD("__stringify(n)")",	\
+		.offset = DWC3_DEP_BASE(n) +	\
+			DWC3_DEPCMD,		\
+	}
+
+
 static const struct debugfs_reg32 dwc3_regs[] = {
 	dump_register(GSBUSCFG0),
 	dump_register(GSBUSCFG1),
@@ -47,6 +70,7 @@
 	dump_register(GCTL),
 	dump_register(GEVTEN),
 	dump_register(GSTS),
+	dump_register(GUCTL1),
 	dump_register(GSNPSID),
 	dump_register(GGPIO),
 	dump_register(GUID),
@@ -218,137 +242,38 @@
 	dump_register(DGCMD),
 	dump_register(DALEPENA),
 
-	dump_register(DEPCMDPAR2(0)),
-	dump_register(DEPCMDPAR2(1)),
-	dump_register(DEPCMDPAR2(2)),
-	dump_register(DEPCMDPAR2(3)),
-	dump_register(DEPCMDPAR2(4)),
-	dump_register(DEPCMDPAR2(5)),
-	dump_register(DEPCMDPAR2(6)),
-	dump_register(DEPCMDPAR2(7)),
-	dump_register(DEPCMDPAR2(8)),
-	dump_register(DEPCMDPAR2(9)),
-	dump_register(DEPCMDPAR2(10)),
-	dump_register(DEPCMDPAR2(11)),
-	dump_register(DEPCMDPAR2(12)),
-	dump_register(DEPCMDPAR2(13)),
-	dump_register(DEPCMDPAR2(14)),
-	dump_register(DEPCMDPAR2(15)),
-	dump_register(DEPCMDPAR2(16)),
-	dump_register(DEPCMDPAR2(17)),
-	dump_register(DEPCMDPAR2(18)),
-	dump_register(DEPCMDPAR2(19)),
-	dump_register(DEPCMDPAR2(20)),
-	dump_register(DEPCMDPAR2(21)),
-	dump_register(DEPCMDPAR2(22)),
-	dump_register(DEPCMDPAR2(23)),
-	dump_register(DEPCMDPAR2(24)),
-	dump_register(DEPCMDPAR2(25)),
-	dump_register(DEPCMDPAR2(26)),
-	dump_register(DEPCMDPAR2(27)),
-	dump_register(DEPCMDPAR2(28)),
-	dump_register(DEPCMDPAR2(29)),
-	dump_register(DEPCMDPAR2(30)),
-	dump_register(DEPCMDPAR2(31)),
-
-	dump_register(DEPCMDPAR1(0)),
-	dump_register(DEPCMDPAR1(1)),
-	dump_register(DEPCMDPAR1(2)),
-	dump_register(DEPCMDPAR1(3)),
-	dump_register(DEPCMDPAR1(4)),
-	dump_register(DEPCMDPAR1(5)),
-	dump_register(DEPCMDPAR1(6)),
-	dump_register(DEPCMDPAR1(7)),
-	dump_register(DEPCMDPAR1(8)),
-	dump_register(DEPCMDPAR1(9)),
-	dump_register(DEPCMDPAR1(10)),
-	dump_register(DEPCMDPAR1(11)),
-	dump_register(DEPCMDPAR1(12)),
-	dump_register(DEPCMDPAR1(13)),
-	dump_register(DEPCMDPAR1(14)),
-	dump_register(DEPCMDPAR1(15)),
-	dump_register(DEPCMDPAR1(16)),
-	dump_register(DEPCMDPAR1(17)),
-	dump_register(DEPCMDPAR1(18)),
-	dump_register(DEPCMDPAR1(19)),
-	dump_register(DEPCMDPAR1(20)),
-	dump_register(DEPCMDPAR1(21)),
-	dump_register(DEPCMDPAR1(22)),
-	dump_register(DEPCMDPAR1(23)),
-	dump_register(DEPCMDPAR1(24)),
-	dump_register(DEPCMDPAR1(25)),
-	dump_register(DEPCMDPAR1(26)),
-	dump_register(DEPCMDPAR1(27)),
-	dump_register(DEPCMDPAR1(28)),
-	dump_register(DEPCMDPAR1(29)),
-	dump_register(DEPCMDPAR1(30)),
-	dump_register(DEPCMDPAR1(31)),
-
-	dump_register(DEPCMDPAR0(0)),
-	dump_register(DEPCMDPAR0(1)),
-	dump_register(DEPCMDPAR0(2)),
-	dump_register(DEPCMDPAR0(3)),
-	dump_register(DEPCMDPAR0(4)),
-	dump_register(DEPCMDPAR0(5)),
-	dump_register(DEPCMDPAR0(6)),
-	dump_register(DEPCMDPAR0(7)),
-	dump_register(DEPCMDPAR0(8)),
-	dump_register(DEPCMDPAR0(9)),
-	dump_register(DEPCMDPAR0(10)),
-	dump_register(DEPCMDPAR0(11)),
-	dump_register(DEPCMDPAR0(12)),
-	dump_register(DEPCMDPAR0(13)),
-	dump_register(DEPCMDPAR0(14)),
-	dump_register(DEPCMDPAR0(15)),
-	dump_register(DEPCMDPAR0(16)),
-	dump_register(DEPCMDPAR0(17)),
-	dump_register(DEPCMDPAR0(18)),
-	dump_register(DEPCMDPAR0(19)),
-	dump_register(DEPCMDPAR0(20)),
-	dump_register(DEPCMDPAR0(21)),
-	dump_register(DEPCMDPAR0(22)),
-	dump_register(DEPCMDPAR0(23)),
-	dump_register(DEPCMDPAR0(24)),
-	dump_register(DEPCMDPAR0(25)),
-	dump_register(DEPCMDPAR0(26)),
-	dump_register(DEPCMDPAR0(27)),
-	dump_register(DEPCMDPAR0(28)),
-	dump_register(DEPCMDPAR0(29)),
-	dump_register(DEPCMDPAR0(30)),
-	dump_register(DEPCMDPAR0(31)),
-
-	dump_register(DEPCMD(0)),
-	dump_register(DEPCMD(1)),
-	dump_register(DEPCMD(2)),
-	dump_register(DEPCMD(3)),
-	dump_register(DEPCMD(4)),
-	dump_register(DEPCMD(5)),
-	dump_register(DEPCMD(6)),
-	dump_register(DEPCMD(7)),
-	dump_register(DEPCMD(8)),
-	dump_register(DEPCMD(9)),
-	dump_register(DEPCMD(10)),
-	dump_register(DEPCMD(11)),
-	dump_register(DEPCMD(12)),
-	dump_register(DEPCMD(13)),
-	dump_register(DEPCMD(14)),
-	dump_register(DEPCMD(15)),
-	dump_register(DEPCMD(16)),
-	dump_register(DEPCMD(17)),
-	dump_register(DEPCMD(18)),
-	dump_register(DEPCMD(19)),
-	dump_register(DEPCMD(20)),
-	dump_register(DEPCMD(21)),
-	dump_register(DEPCMD(22)),
-	dump_register(DEPCMD(23)),
-	dump_register(DEPCMD(24)),
-	dump_register(DEPCMD(25)),
-	dump_register(DEPCMD(26)),
-	dump_register(DEPCMD(27)),
-	dump_register(DEPCMD(28)),
-	dump_register(DEPCMD(29)),
-	dump_register(DEPCMD(30)),
-	dump_register(DEPCMD(31)),
+	dump_ep_register_set(0),
+	dump_ep_register_set(1),
+	dump_ep_register_set(2),
+	dump_ep_register_set(3),
+	dump_ep_register_set(4),
+	dump_ep_register_set(5),
+	dump_ep_register_set(6),
+	dump_ep_register_set(7),
+	dump_ep_register_set(8),
+	dump_ep_register_set(9),
+	dump_ep_register_set(10),
+	dump_ep_register_set(11),
+	dump_ep_register_set(12),
+	dump_ep_register_set(13),
+	dump_ep_register_set(14),
+	dump_ep_register_set(15),
+	dump_ep_register_set(16),
+	dump_ep_register_set(17),
+	dump_ep_register_set(18),
+	dump_ep_register_set(19),
+	dump_ep_register_set(20),
+	dump_ep_register_set(21),
+	dump_ep_register_set(22),
+	dump_ep_register_set(23),
+	dump_ep_register_set(24),
+	dump_ep_register_set(25),
+	dump_ep_register_set(26),
+	dump_ep_register_set(27),
+	dump_ep_register_set(28),
+	dump_ep_register_set(29),
+	dump_ep_register_set(30),
+	dump_ep_register_set(31),
 
 	dump_register(OCFG),
 	dump_register(OCTL),
@@ -939,7 +864,7 @@
 
 	dwc->regset->regs = dwc3_regs;
 	dwc->regset->nregs = ARRAY_SIZE(dwc3_regs);
-	dwc->regset->base = dwc->regs;
+	dwc->regset->base = dwc->regs - DWC3_GLOBALS_REGS_START;
 
 	file = debugfs_create_regset32("regdump", S_IRUGO, root, dwc->regset);
 	if (!file)
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index af26449..29e80cc 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -165,7 +165,7 @@
 
 static u32 dwc3_omap_read_irq0_status(struct dwc3_omap *omap)
 {
-	return dwc3_omap_readl(omap->base, USBOTGSS_IRQSTATUS_0 -
+	return dwc3_omap_readl(omap->base, USBOTGSS_IRQSTATUS_RAW_0 -
 						omap->irq0_offset);
 }
 
@@ -178,7 +178,7 @@
 
 static u32 dwc3_omap_read_irqmisc_status(struct dwc3_omap *omap)
 {
-	return dwc3_omap_readl(omap->base, USBOTGSS_IRQSTATUS_MISC +
+	return dwc3_omap_readl(omap->base, USBOTGSS_IRQSTATUS_RAW_MISC +
 						omap->irqmisc_offset);
 }
 
@@ -231,35 +231,30 @@
 		}
 
 		val = dwc3_omap_read_utmi_ctrl(omap);
-		val &= ~(USBOTGSS_UTMI_OTG_CTRL_IDDIG
-				| USBOTGSS_UTMI_OTG_CTRL_VBUSVALID
-				| USBOTGSS_UTMI_OTG_CTRL_SESSEND);
-		val |= USBOTGSS_UTMI_OTG_CTRL_SESSVALID
-				| USBOTGSS_UTMI_OTG_CTRL_POWERPRESENT;
+		val &= ~USBOTGSS_UTMI_OTG_CTRL_IDDIG;
 		dwc3_omap_write_utmi_ctrl(omap, val);
 		break;
 
 	case OMAP_DWC3_VBUS_VALID:
 		val = dwc3_omap_read_utmi_ctrl(omap);
 		val &= ~USBOTGSS_UTMI_OTG_CTRL_SESSEND;
-		val |= USBOTGSS_UTMI_OTG_CTRL_IDDIG
-				| USBOTGSS_UTMI_OTG_CTRL_VBUSVALID
-				| USBOTGSS_UTMI_OTG_CTRL_SESSVALID
-				| USBOTGSS_UTMI_OTG_CTRL_POWERPRESENT;
+		val |= USBOTGSS_UTMI_OTG_CTRL_VBUSVALID
+				| USBOTGSS_UTMI_OTG_CTRL_SESSVALID;
 		dwc3_omap_write_utmi_ctrl(omap, val);
 		break;
 
 	case OMAP_DWC3_ID_FLOAT:
 		if (omap->vbus_reg)
 			regulator_disable(omap->vbus_reg);
+		val = dwc3_omap_read_utmi_ctrl(omap);
+		val |= USBOTGSS_UTMI_OTG_CTRL_IDDIG;
+		dwc3_omap_write_utmi_ctrl(omap, val);
 
 	case OMAP_DWC3_VBUS_OFF:
 		val = dwc3_omap_read_utmi_ctrl(omap);
 		val &= ~(USBOTGSS_UTMI_OTG_CTRL_SESSVALID
-				| USBOTGSS_UTMI_OTG_CTRL_VBUSVALID
-				| USBOTGSS_UTMI_OTG_CTRL_POWERPRESENT);
-		val |= USBOTGSS_UTMI_OTG_CTRL_SESSEND
-				| USBOTGSS_UTMI_OTG_CTRL_IDDIG;
+				| USBOTGSS_UTMI_OTG_CTRL_VBUSVALID);
+		val |= USBOTGSS_UTMI_OTG_CTRL_SESSEND;
 		dwc3_omap_write_utmi_ctrl(omap, val);
 		break;
 
@@ -268,19 +263,38 @@
 	}
 }
 
+static void dwc3_omap_enable_irqs(struct dwc3_omap *omap);
+static void dwc3_omap_disable_irqs(struct dwc3_omap *omap);
+
 static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap)
 {
 	struct dwc3_omap	*omap = _omap;
+
+	if (dwc3_omap_read_irqmisc_status(omap) ||
+	    dwc3_omap_read_irq0_status(omap)) {
+		/* mask irqs */
+		dwc3_omap_disable_irqs(omap);
+		return IRQ_WAKE_THREAD;
+	}
+
+	return IRQ_NONE;
+}
+
+static irqreturn_t dwc3_omap_interrupt_thread(int irq, void *_omap)
+{
+	struct dwc3_omap	*omap = _omap;
 	u32			reg;
 
+	/* clear irq status flags */
 	reg = dwc3_omap_read_irqmisc_status(omap);
-
 	dwc3_omap_write_irqmisc_status(omap, reg);
 
 	reg = dwc3_omap_read_irq0_status(omap);
-
 	dwc3_omap_write_irq0_status(omap, reg);
 
+	/* unmask irqs */
+	dwc3_omap_enable_irqs(omap);
+
 	return IRQ_HANDLED;
 }
 
@@ -497,8 +511,9 @@
 	/* check the DMA Status */
 	reg = dwc3_omap_readl(omap->base, USBOTGSS_SYSCONFIG);
 
-	ret = devm_request_irq(dev, omap->irq, dwc3_omap_interrupt, 0,
-			"dwc3-omap", omap);
+	ret = devm_request_threaded_irq(dev, omap->irq, dwc3_omap_interrupt,
+					dwc3_omap_interrupt_thread, IRQF_SHARED,
+					"dwc3-omap", omap);
 	if (ret) {
 		dev_err(dev, "failed to request IRQ #%d --> %d\n",
 				omap->irq, ret);
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index 14196cd..45f5a23 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -20,11 +20,11 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/pci.h>
+#include <linux/pm_runtime.h>
 #include <linux/platform_device.h>
 #include <linux/gpio/consumer.h>
 #include <linux/acpi.h>
-
-#include "platform_data.h"
+#include <linux/delay.h>
 
 #define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3		0xabcd
 #define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3_AXI	0xabce
@@ -51,62 +51,70 @@
 {
 	if (pdev->vendor == PCI_VENDOR_ID_AMD &&
 	    pdev->device == PCI_DEVICE_ID_AMD_NL_USB) {
-		struct dwc3_platform_data pdata;
+		struct property_entry properties[] = {
+			PROPERTY_ENTRY_BOOL("snps,has-lpm-erratum"),
+			PROPERTY_ENTRY_U8("snps,lpm-nyet-threshold", 0xf),
+			PROPERTY_ENTRY_BOOL("snps,u2exit_lfps_quirk"),
+			PROPERTY_ENTRY_BOOL("snps,u2ss_inp3_quirk"),
+			PROPERTY_ENTRY_BOOL("snps,req_p1p2p3_quirk"),
+			PROPERTY_ENTRY_BOOL("snps,del_p1p2p3_quirk"),
+			PROPERTY_ENTRY_BOOL("snps,del_phy_power_chg_quirk"),
+			PROPERTY_ENTRY_BOOL("snps,lfps_filter_quirk"),
+			PROPERTY_ENTRY_BOOL("snps,rx_detect_poll_quirk"),
+			PROPERTY_ENTRY_BOOL("snps,tx_de_emphasis_quirk"),
+			PROPERTY_ENTRY_U8("snps,tx_de_emphasis", 1),
+			/*
+			 * FIXME these quirks should be removed when AMD NL
+			 * tapes out
+			 */
+			PROPERTY_ENTRY_BOOL("snps,disable_scramble_quirk"),
+			PROPERTY_ENTRY_BOOL("snps,dis_u3_susphy_quirk"),
+			PROPERTY_ENTRY_BOOL("snps,dis_u2_susphy_quirk"),
+			{ },
+		};
 
-		memset(&pdata, 0, sizeof(pdata));
-
-		pdata.has_lpm_erratum = true;
-		pdata.lpm_nyet_threshold = 0xf;
-
-		pdata.u2exit_lfps_quirk = true;
-		pdata.u2ss_inp3_quirk = true;
-		pdata.req_p1p2p3_quirk = true;
-		pdata.del_p1p2p3_quirk = true;
-		pdata.del_phy_power_chg_quirk = true;
-		pdata.lfps_filter_quirk = true;
-		pdata.rx_detect_poll_quirk = true;
-
-		pdata.tx_de_emphasis_quirk = true;
-		pdata.tx_de_emphasis = 1;
-
-		/*
-		 * FIXME these quirks should be removed when AMD NL
-		 * taps out
-		 */
-		pdata.disable_scramble_quirk = true;
-		pdata.dis_u3_susphy_quirk = true;
-		pdata.dis_u2_susphy_quirk = true;
-
-		return platform_device_add_data(dwc3, &pdata, sizeof(pdata));
+		return platform_device_add_properties(dwc3, properties);
 	}
 
-	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
-	    pdev->device == PCI_DEVICE_ID_INTEL_BYT) {
-		struct gpio_desc *gpio;
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
+		int ret;
 
-		acpi_dev_add_driver_gpios(ACPI_COMPANION(&pdev->dev),
-					  acpi_dwc3_byt_gpios);
+		struct property_entry properties[] = {
+			PROPERTY_ENTRY_STRING("dr-mode", "peripheral"),
+			{ }
+		};
 
-		/*
-		 * These GPIOs will turn on the USB2 PHY. Note that we have to
-		 * put the gpio descriptors again here because the phy driver
-		 * might want to grab them, too.
-		 */
-		gpio = gpiod_get_optional(&pdev->dev, "cs", GPIOD_OUT_LOW);
-		if (IS_ERR(gpio))
-			return PTR_ERR(gpio);
+		ret = platform_device_add_properties(dwc3, properties);
+		if (ret < 0)
+			return ret;
 
-		gpiod_set_value_cansleep(gpio, 1);
-		gpiod_put(gpio);
+		if (pdev->device == PCI_DEVICE_ID_INTEL_BYT) {
+			struct gpio_desc *gpio;
 
-		gpio = gpiod_get_optional(&pdev->dev, "reset", GPIOD_OUT_LOW);
-		if (IS_ERR(gpio))
-			return PTR_ERR(gpio);
+			acpi_dev_add_driver_gpios(ACPI_COMPANION(&pdev->dev),
+					acpi_dwc3_byt_gpios);
 
-		if (gpio) {
+			/*
+			 * These GPIOs will turn on the USB2 PHY. Note that we have to
+			 * put the gpio descriptors again here because the phy driver
+			 * might want to grab them, too.
+			 */
+			gpio = gpiod_get_optional(&pdev->dev, "cs", GPIOD_OUT_LOW);
+			if (IS_ERR(gpio))
+				return PTR_ERR(gpio);
+
 			gpiod_set_value_cansleep(gpio, 1);
 			gpiod_put(gpio);
-			usleep_range(10000, 11000);
+
+			gpio = gpiod_get_optional(&pdev->dev, "reset", GPIOD_OUT_LOW);
+			if (IS_ERR(gpio))
+				return PTR_ERR(gpio);
+
+			if (gpio) {
+				gpiod_set_value_cansleep(gpio, 1);
+				gpiod_put(gpio);
+				usleep_range(10000, 11000);
+			}
 		}
 	}
 
@@ -114,15 +122,14 @@
 	    (pdev->device == PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 ||
 	     pdev->device == PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3_AXI ||
 	     pdev->device == PCI_DEVICE_ID_SYNOPSYS_HAPSUSB31)) {
+		struct property_entry properties[] = {
+			PROPERTY_ENTRY_BOOL("snps,usb3_lpm_capable"),
+			PROPERTY_ENTRY_BOOL("snps,has-lpm-erratum"),
+			PROPERTY_ENTRY_BOOL("snps,dis_enblslpm_quirk"),
+			{ },
+		};
 
-		struct dwc3_platform_data pdata;
-
-		memset(&pdata, 0, sizeof(pdata));
-		pdata.usb3_lpm_capable = true;
-		pdata.has_lpm_erratum = true;
-		pdata.dis_enblslpm_quirk = true;
-
-		return platform_device_add_data(dwc3, &pdata, sizeof(pdata));
+		return platform_device_add_properties(dwc3, properties);
 	}
 
 	return 0;
@@ -180,7 +187,11 @@
 		goto err;
 	}
 
+	device_init_wakeup(dev, true);
+	device_set_run_wake(dev, true);
 	pci_set_drvdata(pci, dwc3);
+	pm_runtime_put(dev);
+
 	return 0;
 err:
 	platform_device_put(dwc3);
@@ -189,6 +200,8 @@
 
 static void dwc3_pci_remove(struct pci_dev *pci)
 {
+	device_init_wakeup(&pci->dev, false);
+	pm_runtime_get(&pci->dev);
 	acpi_dev_remove_driver_gpios(ACPI_COMPANION(&pci->dev));
 	platform_device_unregister(pci_get_drvdata(pci));
 }
@@ -219,11 +232,43 @@
 };
 MODULE_DEVICE_TABLE(pci, dwc3_pci_id_table);
 
+#ifdef CONFIG_PM
+static int dwc3_pci_runtime_suspend(struct device *dev)
+{
+	if (device_run_wake(dev))
+		return 0;
+
+	return -EBUSY;
+}
+
+static int dwc3_pci_pm_dummy(struct device *dev)
+{
+	/*
+	 * There's nothing to do here. No, seriously. Everything is either taken
+	 * care either by PCI subsystem or dwc3/core.c, so we have nothing
+	 * missing here.
+	 *
+	 * So you'd think we didn't need this at all, but PCI subsystem will
+	 * bail out if we don't have a valid callback :-s
+	 */
+	return 0;
+}
+#endif /* CONFIG_PM */
+
+static struct dev_pm_ops dwc3_pci_dev_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(dwc3_pci_pm_dummy, dwc3_pci_pm_dummy)
+	SET_RUNTIME_PM_OPS(dwc3_pci_runtime_suspend, dwc3_pci_pm_dummy,
+		NULL)
+};
+
 static struct pci_driver dwc3_pci_driver = {
 	.name		= "dwc3-pci",
 	.id_table	= dwc3_pci_id_table,
 	.probe		= dwc3_pci_probe,
 	.remove		= dwc3_pci_remove,
+	.driver		= {
+		.pm	= &dwc3_pci_dev_pm_ops,
+	}
 };
 
 MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 51b52a7..fe79d77 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -98,8 +98,7 @@
 
 	trace_dwc3_prepare_trb(dep, trb);
 
-	ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
-			DWC3_DEPCMD_STARTTRANSFER, &params);
+	ret = dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_STARTTRANSFER, &params);
 	if (ret < 0) {
 		dwc3_trace(trace_dwc3_ep0, "%s STARTTRANSFER failed",
 				dep->name);
@@ -107,9 +106,7 @@
 	}
 
 	dep->flags |= DWC3_EP_BUSY;
-	dep->resource_index = dwc3_gadget_ep_get_transfer_index(dwc,
-			dep->number);
-
+	dep->resource_index = dwc3_gadget_ep_get_transfer_index(dep);
 	dwc->ep0_next_event = DWC3_EP0_COMPLETE;
 
 	return 0;
@@ -499,7 +496,7 @@
 	case USB_RECIP_ENDPOINT:
 		switch (wValue) {
 		case USB_ENDPOINT_HALT:
-			dep = dwc3_wIndex_to_dep(dwc, wIndex);
+			dep = dwc3_wIndex_to_dep(dwc, ctrl->wIndex);
 			if (!dep)
 				return -EINVAL;
 			if (set == 0 && (dep->flags & DWC3_EP_WEDGE))
@@ -622,8 +619,8 @@
 	struct timing {
 		u8	u1sel;
 		u8	u1pel;
-		u16	u2sel;
-		u16	u2pel;
+		__le16	u2sel;
+		__le16	u2pel;
 	} __packed timing;
 
 	int		ret;
@@ -980,7 +977,7 @@
 		ret = usb_gadget_map_request(&dwc->gadget, &req->request,
 				dep->number);
 		if (ret) {
-			dwc3_trace(trace_dwc3_ep0, "failed to map request\n");
+			dwc3_trace(trace_dwc3_ep0, "failed to map request");
 			return;
 		}
 
@@ -1008,7 +1005,7 @@
 		ret = usb_gadget_map_request(&dwc->gadget, &req->request,
 				dep->number);
 		if (ret) {
-			dwc3_trace(trace_dwc3_ep0, "failed to map request\n");
+			dwc3_trace(trace_dwc3_ep0, "failed to map request");
 			return;
 		}
 
@@ -1058,7 +1055,7 @@
 	cmd |= DWC3_DEPCMD_CMDIOC;
 	cmd |= DWC3_DEPCMD_PARAM(dep->resource_index);
 	memset(&params, 0, sizeof(params));
-	ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, &params);
+	ret = dwc3_send_gadget_ep_cmd(dep, cmd, &params);
 	WARN_ON_ONCE(ret);
 	dep->resource_index = 0;
 }
@@ -1112,11 +1109,8 @@
 void dwc3_ep0_interrupt(struct dwc3 *dwc,
 		const struct dwc3_event_depevt *event)
 {
-	u8			epnum = event->endpoint_number;
-
-	dwc3_trace(trace_dwc3_ep0, "%s while ep%d%s in state '%s'",
-			dwc3_ep_event_string(event->endpoint_event),
-			epnum >> 1, (epnum & 1) ? "in" : "out",
+	dwc3_trace(trace_dwc3_ep0, "%s: state '%s'",
+			dwc3_ep_event_string(event),
 			dwc3_ep0_state_string(dwc->ep0state));
 
 	switch (event->endpoint_event) {
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 07248ff..8f8c215 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -145,21 +145,29 @@
 	return -ETIMEDOUT;
 }
 
+/**
+ * dwc3_ep_inc_trb() - Increment a TRB index.
+ * @index - Pointer to the TRB index to increment.
+ *
+ * The index should never point to the link TRB. After incrementing,
+ * if it is point to the link TRB, wrap around to the beginning. The
+ * link TRB is always at the last TRB entry.
+ */
+static void dwc3_ep_inc_trb(u8 *index)
+{
+	(*index)++;
+	if (*index == (DWC3_TRB_NUM - 1))
+		*index = 0;
+}
+
 static void dwc3_ep_inc_enq(struct dwc3_ep *dep)
 {
-	dep->trb_enqueue++;
-	dep->trb_enqueue %= DWC3_TRB_NUM;
+	dwc3_ep_inc_trb(&dep->trb_enqueue);
 }
 
 static void dwc3_ep_inc_deq(struct dwc3_ep *dep)
 {
-	dep->trb_dequeue++;
-	dep->trb_dequeue %= DWC3_TRB_NUM;
-}
-
-static int dwc3_ep_is_last_trb(unsigned int index)
-{
-	return index == DWC3_TRB_NUM - 1;
+	dwc3_ep_inc_trb(&dep->trb_dequeue);
 }
 
 void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
@@ -172,13 +180,6 @@
 		i = 0;
 		do {
 			dwc3_ep_inc_deq(dep);
-			/*
-			 * Skip LINK TRB. We can't use req->trb and check for
-			 * DWC3_TRBCTL_LINK_TRB because it points the TRB we
-			 * just completed (not the LINK TRB).
-			 */
-			if (dwc3_ep_is_last_trb(dep->trb_dequeue))
-				dwc3_ep_inc_deq(dep);
 		} while(++i < req->request.num_mapped_sgs);
 		req->started = false;
 	}
@@ -199,57 +200,54 @@
 	spin_unlock(&dwc->lock);
 	usb_gadget_giveback_request(&dep->endpoint, &req->request);
 	spin_lock(&dwc->lock);
+
+	if (dep->number > 1)
+		pm_runtime_put(dwc->dev);
 }
 
 int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned cmd, u32 param)
 {
 	u32		timeout = 500;
+	int		status = 0;
+	int		ret = 0;
 	u32		reg;
 
-	trace_dwc3_gadget_generic_cmd(cmd, param);
-
 	dwc3_writel(dwc->regs, DWC3_DGCMDPAR, param);
 	dwc3_writel(dwc->regs, DWC3_DGCMD, cmd | DWC3_DGCMD_CMDACT);
 
 	do {
 		reg = dwc3_readl(dwc->regs, DWC3_DGCMD);
 		if (!(reg & DWC3_DGCMD_CMDACT)) {
-			dwc3_trace(trace_dwc3_gadget,
-					"Command Complete --> %d",
-					DWC3_DGCMD_STATUS(reg));
-			if (DWC3_DGCMD_STATUS(reg))
-				return -EINVAL;
-			return 0;
+			status = DWC3_DGCMD_STATUS(reg);
+			if (status)
+				ret = -EINVAL;
+			break;
 		}
+	} while (timeout--);
 
-		/*
-		 * We can't sleep here, because it's also called from
-		 * interrupt context.
-		 */
-		timeout--;
-		if (!timeout) {
-			dwc3_trace(trace_dwc3_gadget,
-					"Command Timed Out");
-			return -ETIMEDOUT;
-		}
-		udelay(1);
-	} while (1);
+	if (!timeout) {
+		ret = -ETIMEDOUT;
+		status = -ETIMEDOUT;
+	}
+
+	trace_dwc3_gadget_generic_cmd(cmd, param, status);
+
+	return ret;
 }
 
 static int __dwc3_gadget_wakeup(struct dwc3 *dwc);
 
-int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
-		unsigned cmd, struct dwc3_gadget_ep_cmd_params *params)
+int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd,
+		struct dwc3_gadget_ep_cmd_params *params)
 {
-	struct dwc3_ep		*dep = dwc->eps[ep];
+	struct dwc3		*dwc = dep->dwc;
 	u32			timeout = 500;
 	u32			reg;
 
+	int			cmd_status = 0;
 	int			susphy = false;
 	int			ret = -EINVAL;
 
-	trace_dwc3_gadget_ep_cmd(dep, cmd, params);
-
 	/*
 	 * Synopsys Databook 2.60a states, on section 6.3.2.5.[1-8], that if
 	 * we're issuing an endpoint command, we must check if
@@ -258,11 +256,13 @@
 	 * We will also set SUSPHY bit to what it was before returning as stated
 	 * by the same section on Synopsys databook.
 	 */
-	reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
-	if (unlikely(reg & DWC3_GUSB2PHYCFG_SUSPHY)) {
-		susphy = true;
-		reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
-		dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+	if (dwc->gadget.speed <= USB_SPEED_HIGH) {
+		reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+		if (unlikely(reg & DWC3_GUSB2PHYCFG_SUSPHY)) {
+			susphy = true;
+			reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
+			dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+		}
 	}
 
 	if (cmd == DWC3_DEPCMD_STARTTRANSFER) {
@@ -279,26 +279,21 @@
 		}
 	}
 
-	dwc3_writel(dwc->regs, DWC3_DEPCMDPAR0(ep), params->param0);
-	dwc3_writel(dwc->regs, DWC3_DEPCMDPAR1(ep), params->param1);
-	dwc3_writel(dwc->regs, DWC3_DEPCMDPAR2(ep), params->param2);
+	dwc3_writel(dep->regs, DWC3_DEPCMDPAR0, params->param0);
+	dwc3_writel(dep->regs, DWC3_DEPCMDPAR1, params->param1);
+	dwc3_writel(dep->regs, DWC3_DEPCMDPAR2, params->param2);
 
-	dwc3_writel(dwc->regs, DWC3_DEPCMD(ep), cmd | DWC3_DEPCMD_CMDACT);
+	dwc3_writel(dep->regs, DWC3_DEPCMD, cmd | DWC3_DEPCMD_CMDACT);
 	do {
-		reg = dwc3_readl(dwc->regs, DWC3_DEPCMD(ep));
+		reg = dwc3_readl(dep->regs, DWC3_DEPCMD);
 		if (!(reg & DWC3_DEPCMD_CMDACT)) {
-			int cmd_status = DWC3_DEPCMD_STATUS(reg);
-
-			dwc3_trace(trace_dwc3_gadget,
-					"Command Complete --> %d",
-					cmd_status);
+			cmd_status = DWC3_DEPCMD_STATUS(reg);
 
 			switch (cmd_status) {
 			case 0:
 				ret = 0;
 				break;
 			case DEPEVT_TRANSFER_NO_RESOURCE:
-				dwc3_trace(trace_dwc3_gadget, "%s: no resource available");
 				ret = -EINVAL;
 				break;
 			case DEPEVT_TRANSFER_BUS_EXPIRY:
@@ -313,7 +308,6 @@
 				 * give a hint to the gadget driver that this is
 				 * the case by returning -EAGAIN.
 				 */
-				dwc3_trace(trace_dwc3_gadget, "%s: bus expiry");
 				ret = -EAGAIN;
 				break;
 			default:
@@ -322,21 +316,14 @@
 
 			break;
 		}
+	} while (--timeout);
 
-		/*
-		 * We can't sleep here, because it is also called from
-		 * interrupt context.
-		 */
-		timeout--;
-		if (!timeout) {
-			dwc3_trace(trace_dwc3_gadget,
-					"Command Timed Out");
-			ret = -ETIMEDOUT;
-			break;
-		}
+	if (timeout == 0) {
+		ret = -ETIMEDOUT;
+		cmd_status = -ETIMEDOUT;
+	}
 
-		udelay(1);
-	} while (1);
+	trace_dwc3_gadget_ep_cmd(dep, cmd, params, cmd_status);
 
 	if (unlikely(susphy)) {
 		reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
@@ -366,7 +353,7 @@
 
 	memset(&params, 0, sizeof(params));
 
-	return dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, &params);
+	return dwc3_send_gadget_ep_cmd(dep, cmd, &params);
 }
 
 static dma_addr_t dwc3_trb_dma_offset(struct dwc3_ep *dep,
@@ -454,7 +441,7 @@
 	memset(&params, 0x00, sizeof(params));
 	cmd = DWC3_DEPCMD_DEPSTARTCFG;
 
-	ret = dwc3_send_gadget_ep_cmd(dwc, 0, cmd, &params);
+	ret = dwc3_send_gadget_ep_cmd(dep, cmd, &params);
 	if (ret)
 		return ret;
 
@@ -475,10 +462,14 @@
 static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep,
 		const struct usb_endpoint_descriptor *desc,
 		const struct usb_ss_ep_comp_descriptor *comp_desc,
-		bool ignore, bool restore)
+		bool modify, bool restore)
 {
 	struct dwc3_gadget_ep_cmd_params params;
 
+	if (dev_WARN_ONCE(dwc->dev, modify && restore,
+					"Can't modify and restore\n"))
+		return -EINVAL;
+
 	memset(&params, 0x00, sizeof(params));
 
 	params.param0 = DWC3_DEPCFG_EP_TYPE(usb_endpoint_type(desc))
@@ -487,30 +478,22 @@
 	/* Burst size is only needed in SuperSpeed mode */
 	if (dwc->gadget.speed >= USB_SPEED_SUPER) {
 		u32 burst = dep->endpoint.maxburst;
-		u32 nump;
-		u32 reg;
-
-		/* update NumP */
-		reg = dwc3_readl(dwc->regs, DWC3_DCFG);
-		nump = DWC3_DCFG_NUMP(reg);
-		nump = max(nump, burst);
-		reg &= ~DWC3_DCFG_NUMP_MASK;
-		reg |= nump << DWC3_DCFG_NUMP_SHIFT;
-		dwc3_writel(dwc->regs, DWC3_DCFG, reg);
-
 		params.param0 |= DWC3_DEPCFG_BURST_SIZE(burst - 1);
 	}
 
-	if (ignore)
-		params.param0 |= DWC3_DEPCFG_IGN_SEQ_NUM;
-
-	if (restore) {
+	if (modify) {
+		params.param0 |= DWC3_DEPCFG_ACTION_MODIFY;
+	} else if (restore) {
 		params.param0 |= DWC3_DEPCFG_ACTION_RESTORE;
 		params.param2 |= dep->saved_state;
+	} else {
+		params.param0 |= DWC3_DEPCFG_ACTION_INIT;
 	}
 
-	params.param1 = DWC3_DEPCFG_XFER_COMPLETE_EN
-		| DWC3_DEPCFG_XFER_NOT_READY_EN;
+	params.param1 = DWC3_DEPCFG_XFER_COMPLETE_EN;
+
+	if (dep->number <= 1 || usb_endpoint_xfer_isoc(desc))
+		params.param1 |= DWC3_DEPCFG_XFER_NOT_READY_EN;
 
 	if (usb_ss_max_streams(comp_desc) && usb_endpoint_xfer_bulk(desc)) {
 		params.param1 |= DWC3_DEPCFG_STREAM_CAPABLE
@@ -541,8 +524,7 @@
 		dep->interval = 1 << (desc->bInterval - 1);
 	}
 
-	return dwc3_send_gadget_ep_cmd(dwc, dep->number,
-			DWC3_DEPCMD_SETEPCONFIG, &params);
+	return dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_SETEPCONFIG, &params);
 }
 
 static int dwc3_gadget_set_xfer_resource(struct dwc3 *dwc, struct dwc3_ep *dep)
@@ -553,8 +535,8 @@
 
 	params.param0 = DWC3_DEPXFERCFG_NUM_XFER_RES(1);
 
-	return dwc3_send_gadget_ep_cmd(dwc, dep->number,
-			DWC3_DEPCMD_SETTRANSFRESOURCE, &params);
+	return dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_SETTRANSFRESOURCE,
+			&params);
 }
 
 /**
@@ -567,7 +549,7 @@
 static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep,
 		const struct usb_endpoint_descriptor *desc,
 		const struct usb_ss_ep_comp_descriptor *comp_desc,
-		bool ignore, bool restore)
+		bool modify, bool restore)
 {
 	struct dwc3		*dwc = dep->dwc;
 	u32			reg;
@@ -581,7 +563,7 @@
 			return ret;
 	}
 
-	ret = dwc3_gadget_set_ep_config(dwc, dep, desc, comp_desc, ignore,
+	ret = dwc3_gadget_set_ep_config(dwc, dep, desc, comp_desc, modify,
 			restore);
 	if (ret)
 		return ret;
@@ -600,38 +582,24 @@
 		dwc3_writel(dwc->regs, DWC3_DALEPENA, reg);
 
 		if (usb_endpoint_xfer_control(desc))
-			goto out;
+			return 0;
+
+		/* Initialize the TRB ring */
+		dep->trb_dequeue = 0;
+		dep->trb_enqueue = 0;
+		memset(dep->trb_pool, 0,
+		       sizeof(struct dwc3_trb) * DWC3_TRB_NUM);
 
 		/* Link TRB. The HWO bit is never reset */
 		trb_st_hw = &dep->trb_pool[0];
 
 		trb_link = &dep->trb_pool[DWC3_TRB_NUM - 1];
-		memset(trb_link, 0, sizeof(*trb_link));
-
 		trb_link->bpl = lower_32_bits(dwc3_trb_dma_offset(dep, trb_st_hw));
 		trb_link->bph = upper_32_bits(dwc3_trb_dma_offset(dep, trb_st_hw));
 		trb_link->ctrl |= DWC3_TRBCTL_LINK_TRB;
 		trb_link->ctrl |= DWC3_TRB_CTRL_HWO;
 	}
 
-out:
-	switch (usb_endpoint_type(desc)) {
-	case USB_ENDPOINT_XFER_CONTROL:
-		/* don't change name */
-		break;
-	case USB_ENDPOINT_XFER_ISOC:
-		strlcat(dep->name, "-isoc", sizeof(dep->name));
-		break;
-	case USB_ENDPOINT_XFER_BULK:
-		strlcat(dep->name, "-bulk", sizeof(dep->name));
-		break;
-	case USB_ENDPOINT_XFER_INT:
-		strlcat(dep->name, "-int", sizeof(dep->name));
-		break;
-	default:
-		dev_err(dwc->dev, "invalid endpoint transfer type\n");
-	}
-
 	return 0;
 }
 
@@ -640,15 +608,13 @@
 {
 	struct dwc3_request		*req;
 
-	if (!list_empty(&dep->started_list)) {
-		dwc3_stop_active_transfer(dwc, dep->number, true);
+	dwc3_stop_active_transfer(dwc, dep->number, true);
 
-		/* - giveback all requests to gadget driver */
-		while (!list_empty(&dep->started_list)) {
-			req = next_request(&dep->started_list);
+	/* - giveback all requests to gadget driver */
+	while (!list_empty(&dep->started_list)) {
+		req = next_request(&dep->started_list);
 
-			dwc3_gadget_giveback(dep, req, -ESHUTDOWN);
-		}
+		dwc3_gadget_giveback(dep, req, -ESHUTDOWN);
 	}
 
 	while (!list_empty(&dep->pending_list)) {
@@ -689,10 +655,6 @@
 	dep->type = 0;
 	dep->flags = 0;
 
-	snprintf(dep->name, sizeof(dep->name), "ep%d%s",
-			dep->number >> 1,
-			(dep->number & 1) ? "in" : "out");
-
 	return 0;
 }
 
@@ -784,6 +746,8 @@
 	req->epnum	= dep->number;
 	req->dep	= dep;
 
+	dep->allocated_requests++;
+
 	trace_dwc3_alloc_request(req);
 
 	return &req->request;
@@ -793,7 +757,9 @@
 		struct usb_request *request)
 {
 	struct dwc3_request		*req = to_dwc3_request(request);
+	struct dwc3_ep			*dep = to_dwc3_ep(ep);
 
+	dep->allocated_requests--;
 	trace_dwc3_free_request(req);
 	kfree(req);
 }
@@ -825,9 +791,6 @@
 	}
 
 	dwc3_ep_inc_enq(dep);
-	/* Skip the LINK-TRB */
-	if (dwc3_ep_is_last_trb(dep->trb_enqueue))
-		dwc3_ep_inc_enq(dep);
 
 	trb->size = DWC3_TRB_SIZE_LENGTH(length);
 	trb->bpl = lower_32_bits(dma);
@@ -877,137 +840,169 @@
 
 	trb->ctrl |= DWC3_TRB_CTRL_HWO;
 
+	dep->queued_requests++;
+
 	trace_dwc3_prepare_trb(dep, trb);
 }
 
+/**
+ * dwc3_ep_prev_trb() - Returns the previous TRB in the ring
+ * @dep: The endpoint with the TRB ring
+ * @index: The index of the current TRB in the ring
+ *
+ * Returns the TRB prior to the one pointed to by the index. If the
+ * index is 0, we will wrap backwards, skip the link TRB, and return
+ * the one just before that.
+ */
+static struct dwc3_trb *dwc3_ep_prev_trb(struct dwc3_ep *dep, u8 index)
+{
+	if (!index)
+		index = DWC3_TRB_NUM - 2;
+	else
+		index = dep->trb_enqueue - 1;
+
+	return &dep->trb_pool[index];
+}
+
+static u32 dwc3_calc_trbs_left(struct dwc3_ep *dep)
+{
+	struct dwc3_trb		*tmp;
+	u8			trbs_left;
+
+	/*
+	 * If enqueue & dequeue are equal than it is either full or empty.
+	 *
+	 * One way to know for sure is if the TRB right before us has HWO bit
+	 * set or not. If it has, then we're definitely full and can't fit any
+	 * more transfers in our ring.
+	 */
+	if (dep->trb_enqueue == dep->trb_dequeue) {
+		tmp = dwc3_ep_prev_trb(dep, dep->trb_enqueue);
+		if (tmp->ctrl & DWC3_TRB_CTRL_HWO)
+			return 0;
+
+		return DWC3_TRB_NUM - 1;
+	}
+
+	trbs_left = dep->trb_dequeue - dep->trb_enqueue;
+	trbs_left &= (DWC3_TRB_NUM - 1);
+
+	if (dep->trb_dequeue < dep->trb_enqueue)
+		trbs_left--;
+
+	return trbs_left;
+}
+
+static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep,
+		struct dwc3_request *req, unsigned int trbs_left,
+		unsigned int more_coming)
+{
+	struct usb_request *request = &req->request;
+	struct scatterlist *sg = request->sg;
+	struct scatterlist *s;
+	unsigned int	last = false;
+	unsigned int	length;
+	dma_addr_t	dma;
+	int		i;
+
+	for_each_sg(sg, s, request->num_mapped_sgs, i) {
+		unsigned chain = true;
+
+		length = sg_dma_len(s);
+		dma = sg_dma_address(s);
+
+		if (sg_is_last(s)) {
+			if (usb_endpoint_xfer_int(dep->endpoint.desc) ||
+				!more_coming)
+				last = true;
+
+			chain = false;
+		}
+
+		if (!trbs_left--)
+			last = true;
+
+		if (last)
+			chain = false;
+
+		dwc3_prepare_one_trb(dep, req, dma, length,
+				last, chain, i);
+
+		if (last)
+			break;
+	}
+}
+
+static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep,
+		struct dwc3_request *req, unsigned int trbs_left,
+		unsigned int more_coming)
+{
+	unsigned int	last = false;
+	unsigned int	length;
+	dma_addr_t	dma;
+
+	dma = req->request.dma;
+	length = req->request.length;
+
+	if (!trbs_left)
+		last = true;
+
+	/* Is this the last request? */
+	if (usb_endpoint_xfer_int(dep->endpoint.desc) || !more_coming)
+		last = true;
+
+	dwc3_prepare_one_trb(dep, req, dma, length,
+			last, false, 0);
+}
+
 /*
  * dwc3_prepare_trbs - setup TRBs from requests
  * @dep: endpoint for which requests are being prepared
- * @starting: true if the endpoint is idle and no requests are queued.
  *
  * The function goes through the requests list and sets up TRBs for the
  * transfers. The function returns once there are no more TRBs available or
  * it runs out of requests.
  */
-static void dwc3_prepare_trbs(struct dwc3_ep *dep, bool starting)
+static void dwc3_prepare_trbs(struct dwc3_ep *dep)
 {
 	struct dwc3_request	*req, *n;
+	unsigned int		more_coming;
 	u32			trbs_left;
-	unsigned int		last_one = 0;
 
 	BUILD_BUG_ON_NOT_POWER_OF_2(DWC3_TRB_NUM);
 
-	trbs_left = dep->trb_dequeue - dep->trb_enqueue;
-
-	/*
-	 * If enqueue & dequeue are equal than it is either full or empty. If we
-	 * are starting to process requests then we are empty. Otherwise we are
-	 * full and don't do anything
-	 */
-	if (!trbs_left) {
-		if (!starting)
-			return;
-
-		trbs_left = DWC3_TRB_NUM;
-	}
-
-	/* The last TRB is a link TRB, not used for xfer */
-	if (trbs_left <= 1)
+	trbs_left = dwc3_calc_trbs_left(dep);
+	if (!trbs_left)
 		return;
 
+	more_coming = dep->allocated_requests - dep->queued_requests;
+
 	list_for_each_entry_safe(req, n, &dep->pending_list, list) {
-		unsigned	length;
-		dma_addr_t	dma;
-		last_one = false;
+		if (req->request.num_mapped_sgs > 0)
+			dwc3_prepare_one_trb_sg(dep, req, trbs_left--,
+					more_coming);
+		else
+			dwc3_prepare_one_trb_linear(dep, req, trbs_left--,
+					more_coming);
 
-		if (req->request.num_mapped_sgs > 0) {
-			struct usb_request *request = &req->request;
-			struct scatterlist *sg = request->sg;
-			struct scatterlist *s;
-			int		i;
-
-			for_each_sg(sg, s, request->num_mapped_sgs, i) {
-				unsigned chain = true;
-
-				length = sg_dma_len(s);
-				dma = sg_dma_address(s);
-
-				if (i == (request->num_mapped_sgs - 1) ||
-						sg_is_last(s)) {
-					if (list_empty(&dep->pending_list))
-						last_one = true;
-					chain = false;
-				}
-
-				trbs_left--;
-				if (!trbs_left)
-					last_one = true;
-
-				if (last_one)
-					chain = false;
-
-				dwc3_prepare_one_trb(dep, req, dma, length,
-						last_one, chain, i);
-
-				if (last_one)
-					break;
-			}
-
-			if (last_one)
-				break;
-		} else {
-			dma = req->request.dma;
-			length = req->request.length;
-			trbs_left--;
-
-			if (!trbs_left)
-				last_one = 1;
-
-			/* Is this the last request? */
-			if (list_is_last(&req->list, &dep->pending_list))
-				last_one = 1;
-
-			dwc3_prepare_one_trb(dep, req, dma, length,
-					last_one, false, 0);
-
-			if (last_one)
-				break;
-		}
+		if (!trbs_left)
+			return;
 	}
 }
 
-static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep, u16 cmd_param,
-		int start_new)
+static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep, u16 cmd_param)
 {
 	struct dwc3_gadget_ep_cmd_params params;
 	struct dwc3_request		*req;
 	struct dwc3			*dwc = dep->dwc;
+	int				starting;
 	int				ret;
 	u32				cmd;
 
-	if (start_new && (dep->flags & DWC3_EP_BUSY)) {
-		dwc3_trace(trace_dwc3_gadget, "%s: endpoint busy", dep->name);
-		return -EBUSY;
-	}
+	starting = !(dep->flags & DWC3_EP_BUSY);
 
-	/*
-	 * If we are getting here after a short-out-packet we don't enqueue any
-	 * new requests as we try to set the IOC bit only on the last request.
-	 */
-	if (start_new) {
-		if (list_empty(&dep->started_list))
-			dwc3_prepare_trbs(dep, start_new);
-
-		/* req points to the first request which will be sent */
-		req = next_request(&dep->started_list);
-	} else {
-		dwc3_prepare_trbs(dep, start_new);
-
-		/*
-		 * req points to the first request where HWO changed from 0 to 1
-		 */
-		req = next_request(&dep->started_list);
-	}
+	dwc3_prepare_trbs(dep);
+	req = next_request(&dep->started_list);
 	if (!req) {
 		dep->flags |= DWC3_EP_PENDING_REQUEST;
 		return 0;
@@ -1015,16 +1010,17 @@
 
 	memset(&params, 0, sizeof(params));
 
-	if (start_new) {
+	if (starting) {
 		params.param0 = upper_32_bits(req->trb_dma);
 		params.param1 = lower_32_bits(req->trb_dma);
-		cmd = DWC3_DEPCMD_STARTTRANSFER;
+		cmd = DWC3_DEPCMD_STARTTRANSFER |
+			DWC3_DEPCMD_PARAM(cmd_param);
 	} else {
-		cmd = DWC3_DEPCMD_UPDATETRANSFER;
+		cmd = DWC3_DEPCMD_UPDATETRANSFER |
+			DWC3_DEPCMD_PARAM(dep->resource_index);
 	}
 
-	cmd |= DWC3_DEPCMD_PARAM(cmd_param);
-	ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, &params);
+	ret = dwc3_send_gadget_ep_cmd(dep, cmd, &params);
 	if (ret < 0) {
 		/*
 		 * FIXME we need to iterate over the list of requests
@@ -1039,9 +1035,8 @@
 
 	dep->flags |= DWC3_EP_BUSY;
 
-	if (start_new) {
-		dep->resource_index = dwc3_gadget_ep_get_transfer_index(dwc,
-				dep->number);
+	if (starting) {
+		dep->resource_index = dwc3_gadget_ep_get_transfer_index(dep);
 		WARN_ON_ONCE(!dep->resource_index);
 	}
 
@@ -1064,7 +1059,7 @@
 	/* 4 micro frames in the future */
 	uf = cur_uf + dep->interval * 4;
 
-	__dwc3_gadget_kick_transfer(dep, uf, 1);
+	__dwc3_gadget_kick_transfer(dep, uf);
 }
 
 static void dwc3_gadget_start_isoc(struct dwc3 *dwc,
@@ -1085,18 +1080,20 @@
 
 	if (!dep->endpoint.desc) {
 		dwc3_trace(trace_dwc3_gadget,
-				"trying to queue request %p to disabled %s\n",
+				"trying to queue request %p to disabled %s",
 				&req->request, dep->endpoint.name);
 		return -ESHUTDOWN;
 	}
 
 	if (WARN(req->dep != dep, "request %p belongs to '%s'\n",
 				&req->request, req->dep->name)) {
-		dwc3_trace(trace_dwc3_gadget, "request %p belongs to '%s'\n",
+		dwc3_trace(trace_dwc3_gadget, "request %p belongs to '%s'",
 				&req->request, req->dep->name);
 		return -EINVAL;
 	}
 
+	pm_runtime_get(dwc->dev);
+
 	req->request.actual	= 0;
 	req->request.status	= -EINPROGRESS;
 	req->direction		= dep->direction;
@@ -1131,9 +1128,8 @@
 	 * little bit faster.
 	 */
 	if (!usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
-			!usb_endpoint_xfer_int(dep->endpoint.desc) &&
-			!(dep->flags & DWC3_EP_BUSY)) {
-		ret = __dwc3_gadget_kick_transfer(dep, 0, true);
+			!usb_endpoint_xfer_int(dep->endpoint.desc)) {
+		ret = __dwc3_gadget_kick_transfer(dep, 0);
 		goto out;
 	}
 
@@ -1163,7 +1159,7 @@
 			return 0;
 		}
 
-		ret = __dwc3_gadget_kick_transfer(dep, 0, true);
+		ret = __dwc3_gadget_kick_transfer(dep, 0);
 		if (!ret)
 			dep->flags &= ~DWC3_EP_PENDING_REQUEST;
 
@@ -1179,8 +1175,7 @@
 			(dep->flags & DWC3_EP_BUSY) &&
 			!(dep->flags & DWC3_EP_MISSED_ISOC)) {
 		WARN_ON_ONCE(!dep->resource_index);
-		ret = __dwc3_gadget_kick_transfer(dep, dep->resource_index,
-				false);
+		ret = __dwc3_gadget_kick_transfer(dep, dep->resource_index);
 		goto out;
 	}
 
@@ -1190,12 +1185,12 @@
 	 * handled.
 	 */
 	if (dep->stream_capable)
-		ret = __dwc3_gadget_kick_transfer(dep, 0, true);
+		ret = __dwc3_gadget_kick_transfer(dep, 0);
 
 out:
 	if (ret && ret != -EBUSY)
 		dwc3_trace(trace_dwc3_gadget,
-				"%s: failed to kick transfers\n",
+				"%s: failed to kick transfers",
 				dep->name);
 	if (ret == -EBUSY)
 		ret = 0;
@@ -1215,7 +1210,7 @@
 	struct usb_request		*request;
 	struct usb_ep			*ep = &dep->endpoint;
 
-	dwc3_trace(trace_dwc3_gadget, "queueing ZLP\n");
+	dwc3_trace(trace_dwc3_gadget, "queueing ZLP");
 	request = dwc3_gadget_ep_alloc_request(ep, GFP_ATOMIC);
 	if (!request)
 		return -ENOMEM;
@@ -1319,23 +1314,36 @@
 	memset(&params, 0x00, sizeof(params));
 
 	if (value) {
-		if (!protocol && ((dep->direction && dep->flags & DWC3_EP_BUSY) ||
-				(!list_empty(&dep->started_list) ||
-				 !list_empty(&dep->pending_list)))) {
+		struct dwc3_trb *trb;
+
+		unsigned transfer_in_flight;
+		unsigned started;
+
+		if (dep->number > 1)
+			trb = dwc3_ep_prev_trb(dep, dep->trb_enqueue);
+		else
+			trb = &dwc->ep0_trb[dep->trb_enqueue];
+
+		transfer_in_flight = trb->ctrl & DWC3_TRB_CTRL_HWO;
+		started = !list_empty(&dep->started_list);
+
+		if (!protocol && ((dep->direction && transfer_in_flight) ||
+				(!dep->direction && started))) {
 			dwc3_trace(trace_dwc3_gadget,
 					"%s: pending request, cannot halt",
 					dep->name);
 			return -EAGAIN;
 		}
 
-		ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
-			DWC3_DEPCMD_SETSTALL, &params);
+		ret = dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_SETSTALL,
+				&params);
 		if (ret)
 			dev_err(dwc->dev, "failed to set STALL on %s\n",
 					dep->name);
 		else
 			dep->flags |= DWC3_EP_STALL;
 	} else {
+
 		ret = dwc3_send_clear_stall_ep_cmd(dep);
 		if (ret)
 			dev_err(dwc->dev, "failed to clear STALL on %s\n",
@@ -1444,8 +1452,8 @@
 	speed = reg & DWC3_DSTS_CONNECTSPD;
 	if ((speed == DWC3_DSTS_SUPERSPEED) ||
 	    (speed == DWC3_DSTS_SUPERSPEED_PLUS)) {
-		dwc3_trace(trace_dwc3_gadget, "no wakeup on SuperSpeed\n");
-		return -EINVAL;
+		dwc3_trace(trace_dwc3_gadget, "no wakeup on SuperSpeed");
+		return 0;
 	}
 
 	link_state = DWC3_DSTS_USBLNKST(reg);
@@ -1456,7 +1464,7 @@
 		break;
 	default:
 		dwc3_trace(trace_dwc3_gadget,
-				"can't wakeup from '%s'\n",
+				"can't wakeup from '%s'",
 				dwc3_gadget_link_string(link_state));
 		return -EINVAL;
 	}
@@ -1525,6 +1533,9 @@
 	u32			reg;
 	u32			timeout = 500;
 
+	if (pm_runtime_suspended(dwc->dev))
+		return 0;
+
 	reg = dwc3_readl(dwc->regs, DWC3_DCTL);
 	if (is_on) {
 		if (dwc->revision <= DWC3_REVISION_187A) {
@@ -1553,18 +1564,11 @@
 
 	do {
 		reg = dwc3_readl(dwc->regs, DWC3_DSTS);
-		if (is_on) {
-			if (!(reg & DWC3_DSTS_DEVCTRLHLT))
-				break;
-		} else {
-			if (reg & DWC3_DSTS_DEVCTRLHLT)
-				break;
-		}
-		timeout--;
-		if (!timeout)
-			return -ETIMEDOUT;
-		udelay(1);
-	} while (1);
+		reg &= DWC3_DSTS_DEVCTRLHLT;
+	} while (--timeout && !(!is_on ^ !reg));
+
+	if (!timeout)
+		return -ETIMEDOUT;
 
 	dwc3_trace(trace_dwc3_gadget, "gadget %s data soft-%s",
 			dwc->gadget_driver
@@ -1616,37 +1620,53 @@
 static irqreturn_t dwc3_interrupt(int irq, void *_dwc);
 static irqreturn_t dwc3_thread_interrupt(int irq, void *_dwc);
 
-static int dwc3_gadget_start(struct usb_gadget *g,
-		struct usb_gadget_driver *driver)
+/**
+ * dwc3_gadget_setup_nump - Calculate and initialize NUMP field of DCFG
+ * dwc: pointer to our context structure
+ *
+ * The following looks like complex but it's actually very simple. In order to
+ * calculate the number of packets we can burst at once on OUT transfers, we're
+ * gonna use RxFIFO size.
+ *
+ * To calculate RxFIFO size we need two numbers:
+ * MDWIDTH = size, in bits, of the internal memory bus
+ * RAM2_DEPTH = depth, in MDWIDTH, of internal RAM2 (where RxFIFO sits)
+ *
+ * Given these two numbers, the formula is simple:
+ *
+ * RxFIFO Size = (RAM2_DEPTH * MDWIDTH / 8) - 24 - 16;
+ *
+ * 24 bytes is for 3x SETUP packets
+ * 16 bytes is a clock domain crossing tolerance
+ *
+ * Given RxFIFO Size, NUMP = RxFIFOSize / 1024;
+ */
+static void dwc3_gadget_setup_nump(struct dwc3 *dwc)
 {
-	struct dwc3		*dwc = gadget_to_dwc(g);
+	u32 ram2_depth;
+	u32 mdwidth;
+	u32 nump;
+	u32 reg;
+
+	ram2_depth = DWC3_GHWPARAMS7_RAM2_DEPTH(dwc->hwparams.hwparams7);
+	mdwidth = DWC3_GHWPARAMS0_MDWIDTH(dwc->hwparams.hwparams0);
+
+	nump = ((ram2_depth * mdwidth / 8) - 24 - 16) / 1024;
+	nump = min_t(u32, nump, 16);
+
+	/* update NumP */
+	reg = dwc3_readl(dwc->regs, DWC3_DCFG);
+	reg &= ~DWC3_DCFG_NUMP_MASK;
+	reg |= nump << DWC3_DCFG_NUMP_SHIFT;
+	dwc3_writel(dwc->regs, DWC3_DCFG, reg);
+}
+
+static int __dwc3_gadget_start(struct dwc3 *dwc)
+{
 	struct dwc3_ep		*dep;
-	unsigned long		flags;
 	int			ret = 0;
-	int			irq;
 	u32			reg;
 
-	irq = platform_get_irq(to_platform_device(dwc->dev), 0);
-	ret = request_threaded_irq(irq, dwc3_interrupt, dwc3_thread_interrupt,
-			IRQF_SHARED, "dwc3", dwc->ev_buf);
-	if (ret) {
-		dev_err(dwc->dev, "failed to request irq #%d --> %d\n",
-				irq, ret);
-		goto err0;
-	}
-
-	spin_lock_irqsave(&dwc->lock, flags);
-
-	if (dwc->gadget_driver) {
-		dev_err(dwc->dev, "%s is already bound to %s\n",
-				dwc->gadget.name,
-				dwc->gadget_driver->driver.name);
-		ret = -EBUSY;
-		goto err1;
-	}
-
-	dwc->gadget_driver	= driver;
-
 	reg = dwc3_readl(dwc->regs, DWC3_DCFG);
 	reg &= ~(DWC3_DCFG_SPEED_MASK);
 
@@ -1668,16 +1688,16 @@
 	} else {
 		switch (dwc->maximum_speed) {
 		case USB_SPEED_LOW:
-			reg |= DWC3_DSTS_LOWSPEED;
+			reg |= DWC3_DCFG_LOWSPEED;
 			break;
 		case USB_SPEED_FULL:
-			reg |= DWC3_DSTS_FULLSPEED1;
+			reg |= DWC3_DCFG_FULLSPEED1;
 			break;
 		case USB_SPEED_HIGH:
-			reg |= DWC3_DSTS_HIGHSPEED;
+			reg |= DWC3_DCFG_HIGHSPEED;
 			break;
 		case USB_SPEED_SUPER_PLUS:
-			reg |= DWC3_DSTS_SUPERSPEED_PLUS;
+			reg |= DWC3_DCFG_SUPERSPEED_PLUS;
 			break;
 		default:
 			dev_err(dwc->dev, "invalid dwc->maximum_speed (%d)\n",
@@ -1701,6 +1721,8 @@
 	reg &= ~DWC3_GRXTHRCFG_PKTCNTSEL;
 	dwc3_writel(dwc->regs, DWC3_GRXTHRCFG, reg);
 
+	dwc3_gadget_setup_nump(dwc);
+
 	/* Start with SuperSpeed Default */
 	dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
 
@@ -1709,7 +1731,7 @@
 			false);
 	if (ret) {
 		dev_err(dwc->dev, "failed to enable %s\n", dep->name);
-		goto err2;
+		goto err0;
 	}
 
 	dep = dwc->eps[1];
@@ -1717,7 +1739,7 @@
 			false);
 	if (ret) {
 		dev_err(dwc->dev, "failed to enable %s\n", dep->name);
-		goto err3;
+		goto err1;
 	}
 
 	/* begin to receive SETUP packets */
@@ -1726,43 +1748,79 @@
 
 	dwc3_gadget_enable_irq(dwc);
 
+	return 0;
+
+err1:
+	__dwc3_gadget_ep_disable(dwc->eps[0]);
+
+err0:
+	return ret;
+}
+
+static int dwc3_gadget_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver)
+{
+	struct dwc3		*dwc = gadget_to_dwc(g);
+	unsigned long		flags;
+	int			ret = 0;
+	int			irq;
+
+	irq = dwc->irq_gadget;
+	ret = request_threaded_irq(irq, dwc3_interrupt, dwc3_thread_interrupt,
+			IRQF_SHARED, "dwc3", dwc->ev_buf);
+	if (ret) {
+		dev_err(dwc->dev, "failed to request irq #%d --> %d\n",
+				irq, ret);
+		goto err0;
+	}
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	if (dwc->gadget_driver) {
+		dev_err(dwc->dev, "%s is already bound to %s\n",
+				dwc->gadget.name,
+				dwc->gadget_driver->driver.name);
+		ret = -EBUSY;
+		goto err1;
+	}
+
+	dwc->gadget_driver	= driver;
+
+	if (pm_runtime_active(dwc->dev))
+		__dwc3_gadget_start(dwc);
+
 	spin_unlock_irqrestore(&dwc->lock, flags);
 
 	return 0;
 
-err3:
-	__dwc3_gadget_ep_disable(dwc->eps[0]);
-
-err2:
-	dwc->gadget_driver = NULL;
-
 err1:
 	spin_unlock_irqrestore(&dwc->lock, flags);
-
-	free_irq(irq, dwc->ev_buf);
+	free_irq(irq, dwc);
 
 err0:
 	return ret;
 }
 
+static void __dwc3_gadget_stop(struct dwc3 *dwc)
+{
+	if (pm_runtime_suspended(dwc->dev))
+		return;
+
+	dwc3_gadget_disable_irq(dwc);
+	__dwc3_gadget_ep_disable(dwc->eps[0]);
+	__dwc3_gadget_ep_disable(dwc->eps[1]);
+}
+
 static int dwc3_gadget_stop(struct usb_gadget *g)
 {
 	struct dwc3		*dwc = gadget_to_dwc(g);
 	unsigned long		flags;
-	int			irq;
 
 	spin_lock_irqsave(&dwc->lock, flags);
-
-	dwc3_gadget_disable_irq(dwc);
-	__dwc3_gadget_ep_disable(dwc->eps[0]);
-	__dwc3_gadget_ep_disable(dwc->eps[1]);
-
+	__dwc3_gadget_stop(dwc);
 	dwc->gadget_driver	= NULL;
-
 	spin_unlock_irqrestore(&dwc->lock, flags);
 
-	irq = platform_get_irq(to_platform_device(dwc->dev), 0);
-	free_irq(irq, dwc->ev_buf);
+	free_irq(dwc->irq_gadget, dwc->ev_buf);
 
 	return 0;
 }
@@ -1785,7 +1843,7 @@
 	u8				i;
 
 	for (i = 0; i < num; i++) {
-		u8 epnum = (i << 1) | (!!direction);
+		u8 epnum = (i << 1) | (direction ? 1 : 0);
 
 		dep = kzalloc(sizeof(*dep), GFP_KERNEL);
 		if (!dep)
@@ -1794,12 +1852,14 @@
 		dep->dwc = dwc;
 		dep->number = epnum;
 		dep->direction = !!direction;
+		dep->regs = dwc->regs + DWC3_DEP_BASE(epnum);
 		dwc->eps[epnum] = dep;
 
 		snprintf(dep->name, sizeof(dep->name), "ep%d%s", epnum >> 1,
 				(epnum & 1) ? "in" : "out");
 
 		dep->endpoint.name = dep->name;
+		spin_lock_init(&dep->lock);
 
 		dwc3_trace(trace_dwc3_gadget, "initializing %s", dep->name);
 
@@ -1901,6 +1961,7 @@
 	unsigned int		s_pkt = 0;
 	unsigned int		trb_status;
 
+	dep->queued_requests--;
 	trace_dwc3_complete_trb(dep, trb);
 
 	if ((trb->ctrl & DWC3_TRB_CTRL_HWO) && status != -ESHUTDOWN)
@@ -1921,7 +1982,7 @@
 			trb_status = DWC3_TRB_SIZE_TRBSTS(trb->size);
 			if (trb_status == DWC3_TRBSTS_MISSED_ISOC) {
 				dwc3_trace(trace_dwc3_gadget,
-						"%s: incomplete IN transfer\n",
+						"%s: incomplete IN transfer",
 						dep->name);
 				/*
 				 * If missed isoc occurred and there is
@@ -2006,6 +2067,14 @@
 			break;
 	} while (1);
 
+	/*
+	 * Our endpoint might get disabled by another thread during
+	 * dwc3_gadget_giveback(). If that happens, we're just gonna return 1
+	 * early on so DWC3_EP_BUSY flag gets cleared
+	 */
+	if (!dep->endpoint.desc)
+		return 1;
+
 	if (usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
 			list_empty(&dep->started_list)) {
 		if (list_empty(&dep->pending_list)) {
@@ -2023,6 +2092,10 @@
 		return 1;
 	}
 
+	if (usb_endpoint_xfer_isoc(dep->endpoint.desc))
+		if ((event->status & DEPEVT_STATUS_IOC) &&
+				(trb->ctrl & DWC3_TRB_CTRL_IOC))
+			return 0;
 	return 1;
 }
 
@@ -2039,7 +2112,7 @@
 		status = -ECONNRESET;
 
 	clean_busy = dwc3_cleanup_done_reqs(dwc, dep, event, status);
-	if (clean_busy && (is_xfer_complete ||
+	if (clean_busy && (!dep->endpoint.desc || is_xfer_complete ||
 				usb_endpoint_xfer_isoc(dep->endpoint.desc)))
 		dep->flags &= ~DWC3_EP_BUSY;
 
@@ -2068,10 +2141,18 @@
 		dwc->u1u2 = 0;
 	}
 
+	/*
+	 * Our endpoint might get disabled by another thread during
+	 * dwc3_gadget_giveback(). If that happens, we're just gonna return 1
+	 * early on so DWC3_EP_BUSY flag gets cleared
+	 */
+	if (!dep->endpoint.desc)
+		return;
+
 	if (!usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
 		int ret;
 
-		ret = __dwc3_gadget_kick_transfer(dep, 0, is_xfer_complete);
+		ret = __dwc3_gadget_kick_transfer(dep, 0);
 		if (!ret || ret == -EBUSY)
 			return;
 	}
@@ -2099,7 +2180,7 @@
 
 		if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
 			dwc3_trace(trace_dwc3_gadget,
-					"%s is an Isochronous endpoint\n",
+					"%s is an Isochronous endpoint",
 					dep->name);
 			return;
 		}
@@ -2122,12 +2203,12 @@
 					dep->name, active ? "Transfer Active"
 					: "Transfer Not Active");
 
-			ret = __dwc3_gadget_kick_transfer(dep, 0, !active);
+			ret = __dwc3_gadget_kick_transfer(dep, 0);
 			if (!ret || ret == -EBUSY)
 				return;
 
 			dwc3_trace(trace_dwc3_gadget,
-					"%s: failed to kick transfers\n",
+					"%s: failed to kick transfers",
 					dep->name);
 		}
 
@@ -2150,11 +2231,11 @@
 			/* FALLTHROUGH */
 		default:
 			dwc3_trace(trace_dwc3_gadget,
-					"unable to find suitable stream\n");
+					"unable to find suitable stream");
 		}
 		break;
 	case DWC3_DEPEVT_RXTXFIFOEVT:
-		dwc3_trace(trace_dwc3_gadget, "%s FIFO Overrun\n", dep->name);
+		dwc3_trace(trace_dwc3_gadget, "%s FIFO Overrun", dep->name);
 		break;
 	case DWC3_DEPEVT_EPCMDCMPLT:
 		dwc3_trace(trace_dwc3_gadget, "Endpoint Command Complete");
@@ -2237,7 +2318,7 @@
 	cmd |= DWC3_DEPCMD_CMDIOC;
 	cmd |= DWC3_DEPCMD_PARAM(dep->resource_index);
 	memset(&params, 0, sizeof(params));
-	ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, &params);
+	ret = dwc3_send_gadget_ep_cmd(dep, cmd, &params);
 	WARN_ON_ONCE(ret);
 	dep->resource_index = 0;
 	dep->flags &= ~DWC3_EP_BUSY;
@@ -2300,12 +2381,16 @@
 	dwc->gadget.speed = USB_SPEED_UNKNOWN;
 	dwc->setup_packet_pending = false;
 	usb_gadget_set_state(&dwc->gadget, USB_STATE_NOTATTACHED);
+
+	dwc->connected = false;
 }
 
 static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
 {
 	u32			reg;
 
+	dwc->connected = true;
+
 	/*
 	 * WORKAROUND: DWC3 revisions <1.88a have an issue which
 	 * would cause a missing Disconnect Event if there's a
@@ -2393,12 +2478,12 @@
 	dwc3_update_ram_clk_sel(dwc, speed);
 
 	switch (speed) {
-	case DWC3_DCFG_SUPERSPEED_PLUS:
+	case DWC3_DSTS_SUPERSPEED_PLUS:
 		dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
 		dwc->gadget.ep0->maxpacket = 512;
 		dwc->gadget.speed = USB_SPEED_SUPER_PLUS;
 		break;
-	case DWC3_DCFG_SUPERSPEED:
+	case DWC3_DSTS_SUPERSPEED:
 		/*
 		 * WORKAROUND: DWC3 revisions <1.90a have an issue which
 		 * would cause a missing USB3 Reset event.
@@ -2419,18 +2504,18 @@
 		dwc->gadget.ep0->maxpacket = 512;
 		dwc->gadget.speed = USB_SPEED_SUPER;
 		break;
-	case DWC3_DCFG_HIGHSPEED:
+	case DWC3_DSTS_HIGHSPEED:
 		dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
 		dwc->gadget.ep0->maxpacket = 64;
 		dwc->gadget.speed = USB_SPEED_HIGH;
 		break;
-	case DWC3_DCFG_FULLSPEED2:
-	case DWC3_DCFG_FULLSPEED1:
+	case DWC3_DSTS_FULLSPEED2:
+	case DWC3_DSTS_FULLSPEED1:
 		dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
 		dwc->gadget.ep0->maxpacket = 64;
 		dwc->gadget.speed = USB_SPEED_FULL;
 		break;
-	case DWC3_DCFG_LOWSPEED:
+	case DWC3_DSTS_LOWSPEED:
 		dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(8);
 		dwc->gadget.ep0->maxpacket = 8;
 		dwc->gadget.speed = USB_SPEED_LOW;
@@ -2440,8 +2525,8 @@
 	/* Enable USB2 LPM Capability */
 
 	if ((dwc->revision > DWC3_REVISION_194A) &&
-	    (speed != DWC3_DCFG_SUPERSPEED) &&
-	    (speed != DWC3_DCFG_SUPERSPEED_PLUS)) {
+	    (speed != DWC3_DSTS_SUPERSPEED) &&
+	    (speed != DWC3_DSTS_SUPERSPEED_PLUS)) {
 		reg = dwc3_readl(dwc->regs, DWC3_DCFG);
 		reg |= DWC3_DCFG_LPM_CAP;
 		dwc3_writel(dwc->regs, DWC3_DCFG, reg);
@@ -2610,6 +2695,17 @@
 	dwc->link_state = next;
 }
 
+static void dwc3_gadget_suspend_interrupt(struct dwc3 *dwc,
+					  unsigned int evtinfo)
+{
+	enum dwc3_link_state next = evtinfo & DWC3_LINK_STATE_MASK;
+
+	if (dwc->link_state != next && next == DWC3_LINK_STATE_U3)
+		dwc3_suspend_gadget(dwc);
+
+	dwc->link_state = next;
+}
+
 static void dwc3_gadget_hibernation_interrupt(struct dwc3 *dwc,
 		unsigned int evtinfo)
 {
@@ -2661,7 +2757,20 @@
 		dwc3_gadget_linksts_change_interrupt(dwc, event->event_info);
 		break;
 	case DWC3_DEVICE_EVENT_EOPF:
-		dwc3_trace(trace_dwc3_gadget, "End of Periodic Frame");
+		/* It changed to be suspend event for version 2.30a and above */
+		if (dwc->revision < DWC3_REVISION_230A) {
+			dwc3_trace(trace_dwc3_gadget, "End of Periodic Frame");
+		} else {
+			dwc3_trace(trace_dwc3_gadget, "U3/L1-L2 Suspend Event");
+
+			/*
+			 * Ignore suspend event until the gadget enters into
+			 * USB_STATE_CONFIGURED state.
+			 */
+			if (dwc->gadget.state >= USB_STATE_CONFIGURED)
+				dwc3_gadget_suspend_interrupt(dwc,
+						event->event_info);
+		}
 		break;
 	case DWC3_DEVICE_EVENT_SOF:
 		dwc3_trace(trace_dwc3_gadget, "Start of Periodic Frame");
@@ -2767,6 +2876,13 @@
 	u32 count;
 	u32 reg;
 
+	if (pm_runtime_suspended(dwc->dev)) {
+		pm_runtime_get(dwc->dev);
+		disable_irq_nosync(dwc->irq_gadget);
+		dwc->pending_events = true;
+		return IRQ_HANDLED;
+	}
+
 	count = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(0));
 	count &= DWC3_GEVNTCOUNT_MASK;
 	if (!count)
@@ -2798,7 +2914,33 @@
  */
 int dwc3_gadget_init(struct dwc3 *dwc)
 {
-	int					ret;
+	int ret, irq;
+	struct platform_device *dwc3_pdev = to_platform_device(dwc->dev);
+
+	irq = platform_get_irq_byname(dwc3_pdev, "peripheral");
+	if (irq == -EPROBE_DEFER)
+		return irq;
+
+	if (irq <= 0) {
+		irq = platform_get_irq_byname(dwc3_pdev, "dwc_usb3");
+		if (irq == -EPROBE_DEFER)
+			return irq;
+
+		if (irq <= 0) {
+			irq = platform_get_irq(dwc3_pdev, 0);
+			if (irq <= 0) {
+				if (irq != -EPROBE_DEFER) {
+					dev_err(dwc->dev,
+						"missing peripheral IRQ\n");
+				}
+				if (!irq)
+					irq = -EINVAL;
+				return irq;
+			}
+		}
+	}
+
+	dwc->irq_gadget = irq;
 
 	dwc->ctrl_req = dma_alloc_coherent(dwc->dev, sizeof(*dwc->ctrl_req),
 			&dwc->ctrl_req_addr, GFP_KERNEL);
@@ -2861,7 +3003,7 @@
 	 */
 	if (dwc->revision < DWC3_REVISION_220A)
 		dwc3_trace(trace_dwc3_gadget,
-				"Changing max_speed on rev %08x\n",
+				"Changing max_speed on rev %08x",
 				dwc->revision);
 
 	dwc->gadget.max_speed		= dwc->maximum_speed;
@@ -2935,61 +3077,50 @@
 
 int dwc3_gadget_suspend(struct dwc3 *dwc)
 {
+	int ret;
+
 	if (!dwc->gadget_driver)
 		return 0;
 
-	if (dwc->pullups_connected) {
-		dwc3_gadget_disable_irq(dwc);
-		dwc3_gadget_run_stop(dwc, true, true);
-	}
+	ret = dwc3_gadget_run_stop(dwc, false, false);
+	if (ret < 0)
+		return ret;
 
-	__dwc3_gadget_ep_disable(dwc->eps[0]);
-	__dwc3_gadget_ep_disable(dwc->eps[1]);
-
-	dwc->dcfg = dwc3_readl(dwc->regs, DWC3_DCFG);
+	dwc3_disconnect_gadget(dwc);
+	__dwc3_gadget_stop(dwc);
 
 	return 0;
 }
 
 int dwc3_gadget_resume(struct dwc3 *dwc)
 {
-	struct dwc3_ep		*dep;
 	int			ret;
 
 	if (!dwc->gadget_driver)
 		return 0;
 
-	/* Start with SuperSpeed Default */
-	dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
-
-	dep = dwc->eps[0];
-	ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false,
-			false);
-	if (ret)
+	ret = __dwc3_gadget_start(dwc);
+	if (ret < 0)
 		goto err0;
 
-	dep = dwc->eps[1];
-	ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false,
-			false);
-	if (ret)
+	ret = dwc3_gadget_run_stop(dwc, true, false);
+	if (ret < 0)
 		goto err1;
 
-	/* begin to receive SETUP packets */
-	dwc->ep0state = EP0_SETUP_PHASE;
-	dwc3_ep0_out_start(dwc);
-
-	dwc3_writel(dwc->regs, DWC3_DCFG, dwc->dcfg);
-
-	if (dwc->pullups_connected) {
-		dwc3_gadget_enable_irq(dwc);
-		dwc3_gadget_run_stop(dwc, true, false);
-	}
-
 	return 0;
 
 err1:
-	__dwc3_gadget_ep_disable(dwc->eps[0]);
+	__dwc3_gadget_stop(dwc);
 
 err0:
 	return ret;
 }
+
+void dwc3_gadget_process_pending_events(struct dwc3 *dwc)
+{
+	if (dwc->pending_events) {
+		dwc3_interrupt(dwc->irq_gadget, dwc->ev_buf);
+		dwc->pending_events = false;
+		enable_irq(dwc->irq_gadget);
+	}
+}
diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h
index f21c0fc..e4a1d97 100644
--- a/drivers/usb/dwc3/gadget.h
+++ b/drivers/usb/dwc3/gadget.h
@@ -95,11 +95,11 @@
  *
  * Caller should take care of locking
  */
-static inline u32 dwc3_gadget_ep_get_transfer_index(struct dwc3 *dwc, u8 number)
+static inline u32 dwc3_gadget_ep_get_transfer_index(struct dwc3_ep *dep)
 {
 	u32			res_id;
 
-	res_id = dwc3_readl(dwc->regs, DWC3_DEPCMD(number));
+	res_id = dwc3_readl(dep->regs, DWC3_DEPCMD);
 
 	return DWC3_DEPCMD_GET_RSC_IDX(res_id);
 }
diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
index c679f63..f6533c6 100644
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -16,15 +16,55 @@
  */
 
 #include <linux/platform_device.h>
-#include <linux/usb/xhci_pdriver.h>
 
 #include "core.h"
 
 int dwc3_host_init(struct dwc3 *dwc)
 {
+	struct property_entry	props[2];
 	struct platform_device	*xhci;
-	struct usb_xhci_pdata	pdata;
-	int			ret;
+	int			ret, irq;
+	struct resource		*res;
+	struct platform_device	*dwc3_pdev = to_platform_device(dwc->dev);
+
+	irq = platform_get_irq_byname(dwc3_pdev, "host");
+	if (irq == -EPROBE_DEFER)
+		return irq;
+
+	if (irq <= 0) {
+		irq = platform_get_irq_byname(dwc3_pdev, "dwc_usb3");
+		if (irq == -EPROBE_DEFER)
+			return irq;
+
+		if (irq <= 0) {
+			irq = platform_get_irq(dwc3_pdev, 0);
+			if (irq <= 0) {
+				if (irq != -EPROBE_DEFER) {
+					dev_err(dwc->dev,
+						"missing host IRQ\n");
+				}
+				if (!irq)
+					irq = -EINVAL;
+				return irq;
+			} else {
+				res = platform_get_resource(dwc3_pdev,
+							    IORESOURCE_IRQ, 0);
+			}
+		} else {
+			res = platform_get_resource_byname(dwc3_pdev,
+							   IORESOURCE_IRQ,
+							   "dwc_usb3");
+		}
+
+	} else {
+		res = platform_get_resource_byname(dwc3_pdev, IORESOURCE_IRQ,
+						   "host");
+	}
+
+	dwc->xhci_resources[1].start = irq;
+	dwc->xhci_resources[1].end = irq;
+	dwc->xhci_resources[1].flags = res->flags;
+	dwc->xhci_resources[1].name = res->name;
 
 	xhci = platform_device_alloc("xhci-hcd", PLATFORM_DEVID_AUTO);
 	if (!xhci) {
@@ -47,14 +87,15 @@
 		goto err1;
 	}
 
-	memset(&pdata, 0, sizeof(pdata));
+	memset(props, 0, sizeof(struct property_entry) * ARRAY_SIZE(props));
 
-	pdata.usb3_lpm_capable = dwc->usb3_lpm_capable;
-
-	ret = platform_device_add_data(xhci, &pdata, sizeof(pdata));
-	if (ret) {
-		dev_err(dwc->dev, "couldn't add platform data to xHCI device\n");
-		goto err1;
+	if (dwc->usb3_lpm_capable) {
+		props[0].name = "usb3-lpm-capable";
+		ret = platform_device_add_properties(xhci, props);
+		if (ret) {
+			dev_err(dwc->dev, "failed to add properties to xHCI\n");
+			goto err1;
+		}
 	}
 
 	phy_create_lookup(dwc->usb2_generic_phy, "usb2-phy",
diff --git a/drivers/usb/dwc3/io.h b/drivers/usb/dwc3/io.h
index 6a79c8e6..a06f9a8 100644
--- a/drivers/usb/dwc3/io.h
+++ b/drivers/usb/dwc3/io.h
@@ -26,7 +26,6 @@
 
 static inline u32 dwc3_readl(void __iomem *base, u32 offset)
 {
-	u32 offs = offset - DWC3_GLOBALS_REGS_START;
 	u32 value;
 
 	/*
@@ -34,7 +33,7 @@
 	 * space, see dwc3_probe in core.c.
 	 * However, the offsets are given starting from xHCI address space.
 	 */
-	value = readl(base + offs);
+	value = readl(base + offset - DWC3_GLOBALS_REGS_START);
 
 	/*
 	 * When tracing we want to make it easy to find the correct address on
@@ -49,14 +48,12 @@
 
 static inline void dwc3_writel(void __iomem *base, u32 offset, u32 value)
 {
-	u32 offs = offset - DWC3_GLOBALS_REGS_START;
-
 	/*
 	 * We requested the mem region starting from the Globals address
 	 * space, see dwc3_probe in core.c.
 	 * However, the offsets are given starting from xHCI address space.
 	 */
-	writel(value, base + offs);
+	writel(value, base + offset - DWC3_GLOBALS_REGS_START);
 
 	/*
 	 * When tracing we want to make it easy to find the correct address on
diff --git a/drivers/usb/dwc3/platform_data.h b/drivers/usb/dwc3/platform_data.h
deleted file mode 100644
index 8826cca..0000000
--- a/drivers/usb/dwc3/platform_data.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/**
- * platform_data.h - USB DWC3 Platform Data Support
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
- * Author: Felipe Balbi <balbi@ti.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2  of
- * the License as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/usb/ch9.h>
-#include <linux/usb/otg.h>
-
-struct dwc3_platform_data {
-	enum usb_device_speed maximum_speed;
-	enum usb_dr_mode dr_mode;
-	bool usb3_lpm_capable;
-
-	unsigned is_utmi_l1_suspend:1;
-	u8 hird_threshold;
-
-	u8 lpm_nyet_threshold;
-
-	unsigned disable_scramble_quirk:1;
-	unsigned has_lpm_erratum:1;
-	unsigned u2exit_lfps_quirk:1;
-	unsigned u2ss_inp3_quirk:1;
-	unsigned req_p1p2p3_quirk:1;
-	unsigned del_p1p2p3_quirk:1;
-	unsigned del_phy_power_chg_quirk:1;
-	unsigned lfps_filter_quirk:1;
-	unsigned rx_detect_poll_quirk:1;
-	unsigned dis_u3_susphy_quirk:1;
-	unsigned dis_u2_susphy_quirk:1;
-	unsigned dis_enblslpm_quirk:1;
-	unsigned dis_rxdet_inp3_quirk:1;
-
-	unsigned tx_de_emphasis_quirk:1;
-	unsigned tx_de_emphasis:2;
-
-	u32 fladj_value;
-
-	const char *hsphy_interface;
-};
diff --git a/drivers/usb/dwc3/trace.h b/drivers/usb/dwc3/trace.h
index 3ac7252..d24cefd 100644
--- a/drivers/usb/dwc3/trace.h
+++ b/drivers/usb/dwc3/trace.h
@@ -71,7 +71,8 @@
 	TP_fast_assign(
 		__entry->event = event;
 	),
-	TP_printk("event %08x", __entry->event)
+	TP_printk("event (%08x): %s", __entry->event,
+			dwc3_decode_event(__entry->event))
 );
 
 DEFINE_EVENT(dwc3_log_event, dwc3_event,
@@ -85,21 +86,21 @@
 	TP_STRUCT__entry(
 		__field(__u8, bRequestType)
 		__field(__u8, bRequest)
-		__field(__le16, wValue)
-		__field(__le16, wIndex)
-		__field(__le16, wLength)
+		__field(__u16, wValue)
+		__field(__u16, wIndex)
+		__field(__u16, wLength)
 	),
 	TP_fast_assign(
 		__entry->bRequestType = ctrl->bRequestType;
 		__entry->bRequest = ctrl->bRequest;
-		__entry->wValue = ctrl->wValue;
-		__entry->wIndex = ctrl->wIndex;
-		__entry->wLength = ctrl->wLength;
+		__entry->wValue = le16_to_cpu(ctrl->wValue);
+		__entry->wIndex = le16_to_cpu(ctrl->wIndex);
+		__entry->wLength = le16_to_cpu(ctrl->wLength);
 	),
 	TP_printk("bRequestType %02x bRequest %02x wValue %04x wIndex %04x wLength %d",
 		__entry->bRequestType, __entry->bRequest,
-		le16_to_cpu(__entry->wValue), le16_to_cpu(__entry->wIndex),
-		le16_to_cpu(__entry->wLength)
+		__entry->wValue, __entry->wIndex,
+		__entry->wLength
 	)
 );
 
@@ -166,37 +167,41 @@
 );
 
 DECLARE_EVENT_CLASS(dwc3_log_generic_cmd,
-	TP_PROTO(unsigned int cmd, u32 param),
-	TP_ARGS(cmd, param),
+	TP_PROTO(unsigned int cmd, u32 param, int status),
+	TP_ARGS(cmd, param, status),
 	TP_STRUCT__entry(
 		__field(unsigned int, cmd)
 		__field(u32, param)
+		__field(int, status)
 	),
 	TP_fast_assign(
 		__entry->cmd = cmd;
 		__entry->param = param;
+		__entry->status = status;
 	),
-	TP_printk("cmd '%s' [%d] param %08x",
+	TP_printk("cmd '%s' [%d] param %08x --> status: %s",
 		dwc3_gadget_generic_cmd_string(__entry->cmd),
-		__entry->cmd, __entry->param
+		__entry->cmd, __entry->param,
+		dwc3_gadget_generic_cmd_status_string(__entry->status)
 	)
 );
 
 DEFINE_EVENT(dwc3_log_generic_cmd, dwc3_gadget_generic_cmd,
-	TP_PROTO(unsigned int cmd, u32 param),
-	TP_ARGS(cmd, param)
+	TP_PROTO(unsigned int cmd, u32 param, int status),
+	TP_ARGS(cmd, param, status)
 );
 
 DECLARE_EVENT_CLASS(dwc3_log_gadget_ep_cmd,
 	TP_PROTO(struct dwc3_ep *dep, unsigned int cmd,
-		struct dwc3_gadget_ep_cmd_params *params),
-	TP_ARGS(dep, cmd, params),
+		struct dwc3_gadget_ep_cmd_params *params, int cmd_status),
+	TP_ARGS(dep, cmd, params, cmd_status),
 	TP_STRUCT__entry(
 		__dynamic_array(char, name, DWC3_MSG_MAX)
 		__field(unsigned int, cmd)
 		__field(u32, param0)
 		__field(u32, param1)
 		__field(u32, param2)
+		__field(int, cmd_status)
 	),
 	TP_fast_assign(
 		snprintf(__get_str(name), DWC3_MSG_MAX, "%s", dep->name);
@@ -204,18 +209,20 @@
 		__entry->param0 = params->param0;
 		__entry->param1 = params->param1;
 		__entry->param2 = params->param2;
+		__entry->cmd_status = cmd_status;
 	),
-	TP_printk("%s: cmd '%s' [%d] params %08x %08x %08x",
+	TP_printk("%s: cmd '%s' [%d] params %08x %08x %08x --> status: %s",
 		__get_str(name), dwc3_gadget_ep_cmd_string(__entry->cmd),
 		__entry->cmd, __entry->param0,
-		__entry->param1, __entry->param2
+		__entry->param1, __entry->param2,
+		dwc3_ep_cmd_status_string(__entry->cmd_status)
 	)
 );
 
 DEFINE_EVENT(dwc3_log_gadget_ep_cmd, dwc3_gadget_ep_cmd,
 	TP_PROTO(struct dwc3_ep *dep, unsigned int cmd,
-		struct dwc3_gadget_ep_cmd_params *params),
-	TP_ARGS(dep, cmd, params)
+		struct dwc3_gadget_ep_cmd_params *params, int cmd_status),
+	TP_ARGS(dep, cmd, params, cmd_status)
 );
 
 DECLARE_EVENT_CLASS(dwc3_log_trb,
@@ -224,6 +231,8 @@
 	TP_STRUCT__entry(
 		__dynamic_array(char, name, DWC3_MSG_MAX)
 		__field(struct dwc3_trb *, trb)
+		__field(u32, allocated)
+		__field(u32, queued)
 		__field(u32, bpl)
 		__field(u32, bph)
 		__field(u32, size)
@@ -232,14 +241,53 @@
 	TP_fast_assign(
 		snprintf(__get_str(name), DWC3_MSG_MAX, "%s", dep->name);
 		__entry->trb = trb;
+		__entry->allocated = dep->allocated_requests;
+		__entry->queued = dep->queued_requests;
 		__entry->bpl = trb->bpl;
 		__entry->bph = trb->bph;
 		__entry->size = trb->size;
 		__entry->ctrl = trb->ctrl;
 	),
-	TP_printk("%s: trb %p bph %08x bpl %08x size %08x ctrl %08x",
-		__get_str(name), __entry->trb, __entry->bph, __entry->bpl,
-		__entry->size, __entry->ctrl
+	TP_printk("%s: %d/%d trb %p buf %08x%08x size %d ctrl %08x (%c%c%c%c:%c%c:%s)",
+		__get_str(name), __entry->queued, __entry->allocated,
+		__entry->trb, __entry->bph, __entry->bpl,
+		__entry->size, __entry->ctrl,
+		__entry->ctrl & DWC3_TRB_CTRL_HWO ? 'H' : 'h',
+		__entry->ctrl & DWC3_TRB_CTRL_LST ? 'L' : 'l',
+		__entry->ctrl & DWC3_TRB_CTRL_CHN ? 'C' : 'c',
+		__entry->ctrl & DWC3_TRB_CTRL_CSP ? 'S' : 's',
+		__entry->ctrl & DWC3_TRB_CTRL_ISP_IMI ? 'S' : 's',
+		__entry->ctrl & DWC3_TRB_CTRL_IOC ? 'C' : 'c',
+		({char *s;
+		switch (__entry->ctrl & 0x3f0) {
+		case DWC3_TRBCTL_NORMAL:
+			s = "normal";
+			break;
+		case DWC3_TRBCTL_CONTROL_SETUP:
+			s = "setup";
+			break;
+		case DWC3_TRBCTL_CONTROL_STATUS2:
+			s = "status2";
+			break;
+		case DWC3_TRBCTL_CONTROL_STATUS3:
+			s = "status3";
+			break;
+		case DWC3_TRBCTL_CONTROL_DATA:
+			s = "data";
+			break;
+		case DWC3_TRBCTL_ISOCHRONOUS_FIRST:
+			s = "isoc-first";
+			break;
+		case DWC3_TRBCTL_ISOCHRONOUS:
+			s = "isoc";
+			break;
+		case DWC3_TRBCTL_LINK_TRB:
+			s = "link";
+			break;
+		default:
+			s = "UNKNOWN";
+			break;
+		} s; })
 	)
 );
 
diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c
index 8cfc319..12731e6 100644
--- a/drivers/usb/early/ehci-dbgp.c
+++ b/drivers/usb/early/ehci-dbgp.c
@@ -13,7 +13,7 @@
 
 #include <linux/console.h>
 #include <linux/errno.h>
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/pci_regs.h>
 #include <linux/pci_ids.h>
 #include <linux/usb/ch9.h>
@@ -1093,5 +1093,5 @@
 
 	return 0;
 }
-module_init(kgdbdbgp_start_thread);
+device_initcall(kgdbdbgp_start_thread);
 #endif /* CONFIG_KGDB */
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 2057add..3c3f31c 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -114,7 +114,7 @@
 
 config USB_GADGET_STORAGE_NUM_BUFFERS
 	int "Number of storage pipeline buffers"
-	range 2 32
+	range 2 256
 	default 2
 	help
 	   Usually 2 buffers are enough to establish a good buffering
diff --git a/drivers/usb/gadget/config.c b/drivers/usb/gadget/config.c
index e6c0542..17a6077 100644
--- a/drivers/usb/gadget/config.c
+++ b/drivers/usb/gadget/config.c
@@ -93,7 +93,7 @@
 	*cp = *config;
 
 	/* then interface/endpoint/class/vendor/... */
-	len = usb_descriptor_fillbuf(USB_DT_CONFIG_SIZE + (u8*)buf,
+	len = usb_descriptor_fillbuf(USB_DT_CONFIG_SIZE + (u8 *)buf,
 			length - USB_DT_CONFIG_SIZE, desc);
 	if (len < 0)
 		return len;
diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c
index cc33d26..5c8429f 100644
--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -130,6 +130,12 @@
 
 	struct dentry			*dentry;
 
+	/*
+	 * Buffer for holding data from partial reads which may happen since
+	 * we’re rounding user read requests to a multiple of a max packet size.
+	 */
+	struct ffs_buffer		*read_buffer;	/* P: epfile->mutex */
+
 	char				name[5];
 
 	unsigned char			in;	/* P: ffs->eps_lock */
@@ -138,6 +144,12 @@
 	unsigned char			_pad;
 };
 
+struct ffs_buffer {
+	size_t length;
+	char *data;
+	char storage[];
+};
+
 /*  ffs_io_data structure ***************************************************/
 
 struct ffs_io_data {
@@ -640,6 +652,49 @@
 	}
 }
 
+static ssize_t ffs_copy_to_iter(void *data, int data_len, struct iov_iter *iter)
+{
+	ssize_t ret = copy_to_iter(data, data_len, iter);
+	if (likely(ret == data_len))
+		return ret;
+
+	if (unlikely(iov_iter_count(iter)))
+		return -EFAULT;
+
+	/*
+	 * Dear user space developer!
+	 *
+	 * TL;DR: To stop getting below error message in your kernel log, change
+	 * user space code using functionfs to align read buffers to a max
+	 * packet size.
+	 *
+	 * Some UDCs (e.g. dwc3) require request sizes to be a multiple of a max
+	 * packet size.  When unaligned buffer is passed to functionfs, it
+	 * internally uses a larger, aligned buffer so that such UDCs are happy.
+	 *
+	 * Unfortunately, this means that host may send more data than was
+	 * requested in read(2) system call.  f_fs doesn’t know what to do with
+	 * that excess data so it simply drops it.
+	 *
+	 * Was the buffer aligned in the first place, no such problem would
+	 * happen.
+	 *
+	 * Data may be dropped only in AIO reads.  Synchronous reads are handled
+	 * by splitting a request into multiple parts.  This splitting may still
+	 * be a problem though so it’s likely best to align the buffer
+	 * regardless of it being AIO or not..
+	 *
+	 * This only affects OUT endpoints, i.e. reading data with a read(2),
+	 * aio_read(2) etc. system calls.  Writing data to an IN endpoint is not
+	 * affected.
+	 */
+	pr_err("functionfs read size %d > requested size %zd, dropping excess data. "
+	       "Align read buffer size to max packet size to avoid the problem.\n",
+	       data_len, ret);
+
+	return ret;
+}
+
 static void ffs_user_copy_worker(struct work_struct *work)
 {
 	struct ffs_io_data *io_data = container_of(work, struct ffs_io_data,
@@ -650,9 +705,7 @@
 
 	if (io_data->read && ret > 0) {
 		use_mm(io_data->mm);
-		ret = copy_to_iter(io_data->buf, ret, &io_data->data);
-		if (ret != io_data->req->actual && iov_iter_count(&io_data->data))
-			ret = -EFAULT;
+		ret = ffs_copy_to_iter(io_data->buf, ret, &io_data->data);
 		unuse_mm(io_data->mm);
 	}
 
@@ -680,6 +733,58 @@
 	schedule_work(&io_data->work);
 }
 
+/* Assumes epfile->mutex is held. */
+static ssize_t __ffs_epfile_read_buffered(struct ffs_epfile *epfile,
+					  struct iov_iter *iter)
+{
+	struct ffs_buffer *buf = epfile->read_buffer;
+	ssize_t ret;
+	if (!buf)
+		return 0;
+
+	ret = copy_to_iter(buf->data, buf->length, iter);
+	if (buf->length == ret) {
+		kfree(buf);
+		epfile->read_buffer = NULL;
+	} else if (unlikely(iov_iter_count(iter))) {
+		ret = -EFAULT;
+	} else {
+		buf->length -= ret;
+		buf->data += ret;
+	}
+	return ret;
+}
+
+/* Assumes epfile->mutex is held. */
+static ssize_t __ffs_epfile_read_data(struct ffs_epfile *epfile,
+				      void *data, int data_len,
+				      struct iov_iter *iter)
+{
+	struct ffs_buffer *buf;
+
+	ssize_t ret = copy_to_iter(data, data_len, iter);
+	if (likely(data_len == ret))
+		return ret;
+
+	if (unlikely(iov_iter_count(iter)))
+		return -EFAULT;
+
+	/* See ffs_copy_to_iter for more context. */
+	pr_warn("functionfs read size %d > requested size %zd, splitting request into multiple reads.",
+		data_len, ret);
+
+	data_len -= ret;
+	buf = kmalloc(sizeof(*buf) + data_len, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+	buf->length = data_len;
+	buf->data = buf->storage;
+	memcpy(buf->storage, data + ret, data_len);
+	epfile->read_buffer = buf;
+
+	return ret;
+}
+
 static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data)
 {
 	struct ffs_epfile *epfile = file->private_data;
@@ -709,21 +814,40 @@
 	if (halt && epfile->isoc)
 		return -EINVAL;
 
+	/* We will be using request and read_buffer */
+	ret = ffs_mutex_lock(&epfile->mutex, file->f_flags & O_NONBLOCK);
+	if (unlikely(ret))
+		goto error;
+
 	/* Allocate & copy */
 	if (!halt) {
+		struct usb_gadget *gadget;
+
+		/*
+		 * Do we have buffered data from previous partial read?  Check
+		 * that for synchronous case only because we do not have
+		 * facility to ‘wake up’ a pending asynchronous read and push
+		 * buffered data to it which we would need to make things behave
+		 * consistently.
+		 */
+		if (!io_data->aio && io_data->read) {
+			ret = __ffs_epfile_read_buffered(epfile, &io_data->data);
+			if (ret)
+				goto error_mutex;
+		}
+
 		/*
 		 * if we _do_ wait above, the epfile->ffs->gadget might be NULL
 		 * before the waiting completes, so do not assign to 'gadget'
 		 * earlier
 		 */
-		struct usb_gadget *gadget = epfile->ffs->gadget;
-		size_t copied;
+		gadget = epfile->ffs->gadget;
 
 		spin_lock_irq(&epfile->ffs->eps_lock);
 		/* In the meantime, endpoint got disabled or changed. */
 		if (epfile->ep != ep) {
-			spin_unlock_irq(&epfile->ffs->eps_lock);
-			return -ESHUTDOWN;
+			ret = -ESHUTDOWN;
+			goto error_lock;
 		}
 		data_len = iov_iter_count(&io_data->data);
 		/*
@@ -735,22 +859,17 @@
 		spin_unlock_irq(&epfile->ffs->eps_lock);
 
 		data = kmalloc(data_len, GFP_KERNEL);
-		if (unlikely(!data))
-			return -ENOMEM;
-		if (!io_data->read) {
-			copied = copy_from_iter(data, data_len, &io_data->data);
-			if (copied != data_len) {
-				ret = -EFAULT;
-				goto error;
-			}
+		if (unlikely(!data)) {
+			ret = -ENOMEM;
+			goto error_mutex;
+		}
+		if (!io_data->read &&
+		    copy_from_iter(data, data_len, &io_data->data) != data_len) {
+			ret = -EFAULT;
+			goto error_mutex;
 		}
 	}
 
-	/* We will be using request */
-	ret = ffs_mutex_lock(&epfile->mutex, file->f_flags & O_NONBLOCK);
-	if (unlikely(ret))
-		goto error;
-
 	spin_lock_irq(&epfile->ffs->eps_lock);
 
 	if (epfile->ep != ep) {
@@ -803,18 +922,13 @@
 			interrupted = ep->status < 0;
 		}
 
-		/*
-		 * XXX We may end up silently droping data here.  Since data_len
-		 * (i.e. req->length) may be bigger than len (after being
-		 * rounded up to maxpacketsize), we may end up with more data
-		 * then user space has space for.
-		 */
-		ret = interrupted ? -EINTR : ep->status;
-		if (io_data->read && ret > 0) {
-			ret = copy_to_iter(data, ret, &io_data->data);
-			if (!ret)
-				ret = -EFAULT;
-		}
+		if (interrupted)
+			ret = -EINTR;
+		else if (io_data->read && ep->status > 0)
+			ret = __ffs_epfile_read_data(epfile, data, ep->status,
+						     &io_data->data);
+		else
+			ret = ep->status;
 		goto error_mutex;
 	} else if (!(req = usb_ep_alloc_request(ep->ep, GFP_KERNEL))) {
 		ret = -ENOMEM;
@@ -980,6 +1094,8 @@
 
 	ENTER();
 
+	kfree(epfile->read_buffer);
+	epfile->read_buffer = NULL;
 	ffs_data_closed(epfile->ffs);
 
 	return 0;
@@ -1605,19 +1721,24 @@
 	unsigned count            = func->ffs->eps_count;
 	unsigned long flags;
 
-	spin_lock_irqsave(&func->ffs->eps_lock, flags);
 	do {
+		if (epfile)
+			mutex_lock(&epfile->mutex);
+		spin_lock_irqsave(&func->ffs->eps_lock, flags);
 		/* pending requests get nuked */
 		if (likely(ep->ep))
 			usb_ep_disable(ep->ep);
 		++ep;
+		spin_unlock_irqrestore(&func->ffs->eps_lock, flags);
 
 		if (epfile) {
 			epfile->ep = NULL;
+			kfree(epfile->read_buffer);
+			epfile->read_buffer = NULL;
+			mutex_unlock(&epfile->mutex);
 			++epfile;
 		}
 	} while (--count);
-	spin_unlock_irqrestore(&func->ffs->eps_lock, flags);
 }
 
 static int ffs_func_eps_enable(struct ffs_function *func)
@@ -2227,8 +2348,8 @@
 {
 	u32 str_count, needed_count, lang_count;
 	struct usb_gadget_strings **stringtabs, *t;
-	struct usb_string *strings, *s;
 	const char *data = _data;
+	struct usb_string *s;
 
 	ENTER();
 
@@ -2286,7 +2407,6 @@
 		stringtabs = vla_ptr(vlabuf, d, stringtabs);
 		t = vla_ptr(vlabuf, d, stringtab);
 		s = vla_ptr(vlabuf, d, strings);
-		strings = s;
 	}
 
 	/* For each language */
diff --git a/drivers/usb/gadget/function/f_mass_storage.c b/drivers/usb/gadget/function/f_mass_storage.c
index 5c6d4d7..2505117 100644
--- a/drivers/usb/gadget/function/f_mass_storage.c
+++ b/drivers/usb/gadget/function/f_mass_storage.c
@@ -2655,18 +2655,6 @@
 }
 EXPORT_SYMBOL_GPL(fsg_common_put);
 
-/* check if fsg_num_buffers is within a valid range */
-static inline int fsg_num_buffers_validate(unsigned int fsg_num_buffers)
-{
-#define FSG_MAX_NUM_BUFFERS	32
-
-	if (fsg_num_buffers >= 2 && fsg_num_buffers <= FSG_MAX_NUM_BUFFERS)
-		return 0;
-	pr_err("fsg_num_buffers %u is out of range (%d to %d)\n",
-	       fsg_num_buffers, 2, FSG_MAX_NUM_BUFFERS);
-	return -EINVAL;
-}
-
 static struct fsg_common *fsg_common_setup(struct fsg_common *common)
 {
 	if (!common) {
@@ -2709,11 +2697,7 @@
 int fsg_common_set_num_buffers(struct fsg_common *common, unsigned int n)
 {
 	struct fsg_buffhd *bh, *buffhds;
-	int i, rc;
-
-	rc = fsg_num_buffers_validate(n);
-	if (rc != 0)
-		return rc;
+	int i;
 
 	buffhds = kcalloc(n, sizeof(*buffhds), GFP_KERNEL);
 	if (!buffhds)
@@ -3401,10 +3385,6 @@
 	if (ret)
 		goto end;
 
-	ret = fsg_num_buffers_validate(num);
-	if (ret)
-		goto end;
-
 	fsg_common_set_num_buffers(opts->common, num);
 	ret = len;
 
diff --git a/drivers/usb/gadget/function/u_serial.c b/drivers/usb/gadget/function/u_serial.c
index 3580f19..6ded634 100644
--- a/drivers/usb/gadget/function/u_serial.c
+++ b/drivers/usb/gadget/function/u_serial.c
@@ -907,7 +907,6 @@
 {
 	struct gs_port	*port = tty->driver_data;
 	unsigned long	flags;
-	int		status;
 
 	pr_vdebug("gs_write: ttyGS%d (%p) writing %d bytes\n",
 			port->port_num, tty, count);
@@ -917,7 +916,7 @@
 		count = gs_buf_put(&port->port_write_buf, buf, count);
 	/* treat count == 0 as flush_chars() */
 	if (port->port_usb)
-		status = gs_start_tx(port);
+		gs_start_tx(port);
 	spin_unlock_irqrestore(&port->port_lock, flags);
 
 	return count;
diff --git a/drivers/usb/gadget/legacy/g_ffs.c b/drivers/usb/gadget/legacy/g_ffs.c
index f85639e..6da7316 100644
--- a/drivers/usb/gadget/legacy/g_ffs.c
+++ b/drivers/usb/gadget/legacy/g_ffs.c
@@ -265,7 +265,7 @@
 {
 	if (!try_module_get(THIS_MODULE))
 		return ERR_PTR(-ENOENT);
-	
+
 	return NULL;
 }
 
@@ -275,7 +275,7 @@
 }
 
 /*
- * The caller of this function takes ffs_lock 
+ * The caller of this function takes ffs_lock
  */
 static int functionfs_ready_callback(struct ffs_data *ffs)
 {
@@ -294,12 +294,12 @@
 		++missing_funcs;
 		gfs_registered = false;
 	}
-	
+
 	return ret;
 }
 
 /*
- * The caller of this function takes ffs_lock 
+ * The caller of this function takes ffs_lock
  */
 static void functionfs_closed_callback(struct ffs_data *ffs)
 {
@@ -347,17 +347,14 @@
 
 #ifdef CONFIG_USB_FUNCTIONFS_RNDIS
 	{
-		struct f_rndis_opts *rndis_opts;
-
 		fi_rndis = usb_get_function_instance("rndis");
 		if (IS_ERR(fi_rndis)) {
 			ret = PTR_ERR(fi_rndis);
 			goto error;
 		}
-		rndis_opts = container_of(fi_rndis, struct f_rndis_opts,
-					  func_inst);
 #ifndef CONFIG_USB_FUNCTIONFS_ETH
-		net = rndis_opts->net;
+		net = container_of(fi_rndis, struct f_rndis_opts,
+				   func_inst)->net;
 #endif
 	}
 #endif
diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig
index 7c28941..658b8da 100644
--- a/drivers/usb/gadget/udc/Kconfig
+++ b/drivers/usb/gadget/udc/Kconfig
@@ -312,7 +312,7 @@
 	  If unsure, say "N" here.  The driver works fine in PIO mode.
 
 config USB_NET2280
-	tristate "NetChip 228x / PLX USB338x"
+	tristate "NetChip NET228x / PLX USB3x8x"
 	depends on PCI
 	help
 	   NetChip 2280 / 2282 is a PCI based USB peripheral controller which
@@ -322,6 +322,8 @@
 	   (for control transfers) and several endpoints with dedicated
 	   functions.
 
+	   PLX 2380 is a PCIe version of the PLX 2380.
+
 	   PLX 3380 / 3382 is a PCIe based USB peripheral controller which
 	   supports full, high speed USB 2.0 and super speed USB 3.0
 	   data transfers.
diff --git a/drivers/usb/gadget/udc/Makefile b/drivers/usb/gadget/udc/Makefile
index dfee534..98e74ed 100644
--- a/drivers/usb/gadget/udc/Makefile
+++ b/drivers/usb/gadget/udc/Makefile
@@ -1,3 +1,8 @@
+# define_trace.h needs to know how to find our header
+CFLAGS_trace.o			:= -I$(src)
+
+udc-core-y			:= core.o trace.o
+
 #
 # USB peripheral controller drivers
 #
diff --git a/drivers/usb/gadget/udc/amd5536udc.c b/drivers/usb/gadget/udc/amd5536udc.c
index 39d70b4..ea03ca7 100644
--- a/drivers/usb/gadget/udc/amd5536udc.c
+++ b/drivers/usb/gadget/udc/amd5536udc.c
@@ -2340,7 +2340,6 @@
 	struct udc_ep *ep;
 	struct udc_request *req;
 	struct udc_data_dma *td;
-	unsigned dma_done;
 	unsigned len;
 
 	ep = &dev->ep[ep_ix];
@@ -2385,13 +2384,8 @@
 			 */
 			if (use_dma_ppb_du) {
 				td = udc_get_last_dma_desc(req);
-				if (td) {
-					dma_done =
-						AMD_GETBITS(td->status,
-						UDC_DMA_IN_STS_BS);
-					/* don't care DMA done */
+				if (td)
 					req->req.actual = req->req.length;
-				}
 			} else {
 				/* assume all bytes transferred */
 				req->req.actual = req->req.length;
@@ -3417,4 +3411,3 @@
 MODULE_DESCRIPTION(UDC_MOD_DESCRIPTION);
 MODULE_AUTHOR("Thomas Dahlmann");
 MODULE_LICENSE("GPL");
-
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index 18569de..bb1f6c8 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -1920,6 +1920,8 @@
 
 	udc->errata = match->data;
 	udc->pmc = syscon_regmap_lookup_by_compatible("atmel,at91sam9g45-pmc");
+	if (IS_ERR(udc->pmc))
+		udc->pmc = syscon_regmap_lookup_by_compatible("atmel,at91sam9x5-pmc");
 	if (udc->errata && IS_ERR(udc->pmc))
 		return ERR_CAST(udc->pmc);
 
diff --git a/drivers/usb/gadget/udc/bdc/bdc_cmd.c b/drivers/usb/gadget/udc/bdc/bdc_cmd.c
index 6a4155c..4d5e918 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_cmd.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_cmd.c
@@ -57,7 +57,6 @@
 					u32 param0, u32 param1,	u32 param2)
 {
 	u32 temp, cmd_status;
-	int reset_bdc = 0;
 	int ret;
 
 	temp = bdc_readl(bdc->regs, BDC_CMDSC);
@@ -94,7 +93,6 @@
 
 	case BDC_CMDS_INTL:
 		dev_err(bdc->dev, "BDC Internal error\n");
-		reset_bdc = 1;
 		ret = -ECONNRESET;
 		break;
 
@@ -102,7 +100,6 @@
 		dev_err(bdc->dev,
 			"command timedout waited for %dusec\n",
 			BDC_CMD_TIMEOUT);
-		reset_bdc = 1;
 		ret = -ECONNRESET;
 		break;
 	default:
diff --git a/drivers/usb/gadget/udc/bdc/bdc_ep.c b/drivers/usb/gadget/udc/bdc/bdc_ep.c
index d619950..ccaa74a 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_ep.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_ep.c
@@ -81,7 +81,7 @@
 			continue;
 		}
 		if (!bd_table->start_bd) {
-			dev_dbg(bdc->dev, "bd dma pool not allocted\n");
+			dev_dbg(bdc->dev, "bd dma pool not allocated\n");
 			continue;
 		}
 
@@ -702,11 +702,9 @@
 /* Queue data stage */
 static int ep0_queue_data_stage(struct bdc *bdc)
 {
-	struct usb_request *ep0_usb_req;
 	struct bdc_ep *ep;
 
 	dev_dbg(bdc->dev, "%s\n", __func__);
-	ep0_usb_req = &bdc->ep0_req.usb_req;
 	ep = bdc->bdc_ep_array[1];
 	bdc->ep0_req.ep = ep;
 	bdc->ep0_req.usb_req.complete = NULL;
@@ -1393,10 +1391,8 @@
 {
 	struct bdc_ep	*ep;
 	u16	wLength;
-	u16	wValue;
 
 	dev_dbg(bdc->dev, "%s\n", __func__);
-	wValue = le16_to_cpu(setup_pkt->wValue);
 	wLength = le16_to_cpu(setup_pkt->wLength);
 	if (unlikely(wLength != 6)) {
 		dev_err(bdc->dev, "%s Wrong wLength:%d\n", __func__, wLength);
diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c
new file mode 100644
index 0000000..ff8685e
--- /dev/null
+++ b/drivers/usb/gadget/udc/core.c
@@ -0,0 +1,1523 @@
+/**
+ * udc.c - Core UDC Framework
+ *
+ * Copyright (C) 2010 Texas Instruments
+ * Author: Felipe Balbi <balbi@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2  of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/err.h>
+#include <linux/dma-mapping.h>
+#include <linux/workqueue.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb.h>
+
+#include "trace.h"
+
+/**
+ * struct usb_udc - describes one usb device controller
+ * @driver - the gadget driver pointer. For use by the class code
+ * @dev - the child device to the actual controller
+ * @gadget - the gadget. For use by the class code
+ * @list - for use by the udc class driver
+ * @vbus - for udcs who care about vbus status, this value is real vbus status;
+ * for udcs who do not care about vbus status, this value is always true
+ *
+ * This represents the internal data structure which is used by the UDC-class
+ * to hold information about udc driver and gadget together.
+ */
+struct usb_udc {
+	struct usb_gadget_driver	*driver;
+	struct usb_gadget		*gadget;
+	struct device			dev;
+	struct list_head		list;
+	bool				vbus;
+};
+
+static struct class *udc_class;
+static LIST_HEAD(udc_list);
+static LIST_HEAD(gadget_driver_pending_list);
+static DEFINE_MUTEX(udc_lock);
+
+static int udc_bind_to_driver(struct usb_udc *udc,
+		struct usb_gadget_driver *driver);
+
+/* ------------------------------------------------------------------------- */
+
+/**
+ * usb_ep_set_maxpacket_limit - set maximum packet size limit for endpoint
+ * @ep:the endpoint being configured
+ * @maxpacket_limit:value of maximum packet size limit
+ *
+ * This function should be used only in UDC drivers to initialize endpoint
+ * (usually in probe function).
+ */
+void usb_ep_set_maxpacket_limit(struct usb_ep *ep,
+					      unsigned maxpacket_limit)
+{
+	ep->maxpacket_limit = maxpacket_limit;
+	ep->maxpacket = maxpacket_limit;
+
+	trace_usb_ep_set_maxpacket_limit(ep, 0);
+}
+EXPORT_SYMBOL_GPL(usb_ep_set_maxpacket_limit);
+
+/**
+ * usb_ep_enable - configure endpoint, making it usable
+ * @ep:the endpoint being configured.  may not be the endpoint named "ep0".
+ *	drivers discover endpoints through the ep_list of a usb_gadget.
+ *
+ * When configurations are set, or when interface settings change, the driver
+ * will enable or disable the relevant endpoints.  while it is enabled, an
+ * endpoint may be used for i/o until the driver receives a disconnect() from
+ * the host or until the endpoint is disabled.
+ *
+ * the ep0 implementation (which calls this routine) must ensure that the
+ * hardware capabilities of each endpoint match the descriptor provided
+ * for it.  for example, an endpoint named "ep2in-bulk" would be usable
+ * for interrupt transfers as well as bulk, but it likely couldn't be used
+ * for iso transfers or for endpoint 14.  some endpoints are fully
+ * configurable, with more generic names like "ep-a".  (remember that for
+ * USB, "in" means "towards the USB master".)
+ *
+ * returns zero, or a negative error code.
+ */
+int usb_ep_enable(struct usb_ep *ep)
+{
+	int ret = 0;
+
+	if (ep->enabled)
+		goto out;
+
+	ret = ep->ops->enable(ep, ep->desc);
+	if (ret) {
+		ret = ret;
+		goto out;
+	}
+
+	ep->enabled = true;
+
+out:
+	trace_usb_ep_enable(ep, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_ep_enable);
+
+/**
+ * usb_ep_disable - endpoint is no longer usable
+ * @ep:the endpoint being unconfigured.  may not be the endpoint named "ep0".
+ *
+ * no other task may be using this endpoint when this is called.
+ * any pending and uncompleted requests will complete with status
+ * indicating disconnect (-ESHUTDOWN) before this call returns.
+ * gadget drivers must call usb_ep_enable() again before queueing
+ * requests to the endpoint.
+ *
+ * returns zero, or a negative error code.
+ */
+int usb_ep_disable(struct usb_ep *ep)
+{
+	int ret = 0;
+
+	if (!ep->enabled)
+		goto out;
+
+	ret = ep->ops->disable(ep);
+	if (ret) {
+		ret = ret;
+		goto out;
+	}
+
+	ep->enabled = false;
+
+out:
+	trace_usb_ep_disable(ep, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_ep_disable);
+
+/**
+ * usb_ep_alloc_request - allocate a request object to use with this endpoint
+ * @ep:the endpoint to be used with with the request
+ * @gfp_flags:GFP_* flags to use
+ *
+ * Request objects must be allocated with this call, since they normally
+ * need controller-specific setup and may even need endpoint-specific
+ * resources such as allocation of DMA descriptors.
+ * Requests may be submitted with usb_ep_queue(), and receive a single
+ * completion callback.  Free requests with usb_ep_free_request(), when
+ * they are no longer needed.
+ *
+ * Returns the request, or null if one could not be allocated.
+ */
+struct usb_request *usb_ep_alloc_request(struct usb_ep *ep,
+						       gfp_t gfp_flags)
+{
+	struct usb_request *req = NULL;
+
+	req = ep->ops->alloc_request(ep, gfp_flags);
+
+	trace_usb_ep_alloc_request(ep, req, req ? 0 : -ENOMEM);
+
+	return req;
+}
+EXPORT_SYMBOL_GPL(usb_ep_alloc_request);
+
+/**
+ * usb_ep_free_request - frees a request object
+ * @ep:the endpoint associated with the request
+ * @req:the request being freed
+ *
+ * Reverses the effect of usb_ep_alloc_request().
+ * Caller guarantees the request is not queued, and that it will
+ * no longer be requeued (or otherwise used).
+ */
+void usb_ep_free_request(struct usb_ep *ep,
+				       struct usb_request *req)
+{
+	ep->ops->free_request(ep, req);
+	trace_usb_ep_free_request(ep, req, 0);
+}
+EXPORT_SYMBOL_GPL(usb_ep_free_request);
+
+/**
+ * usb_ep_queue - queues (submits) an I/O request to an endpoint.
+ * @ep:the endpoint associated with the request
+ * @req:the request being submitted
+ * @gfp_flags: GFP_* flags to use in case the lower level driver couldn't
+ *	pre-allocate all necessary memory with the request.
+ *
+ * This tells the device controller to perform the specified request through
+ * that endpoint (reading or writing a buffer).  When the request completes,
+ * including being canceled by usb_ep_dequeue(), the request's completion
+ * routine is called to return the request to the driver.  Any endpoint
+ * (except control endpoints like ep0) may have more than one transfer
+ * request queued; they complete in FIFO order.  Once a gadget driver
+ * submits a request, that request may not be examined or modified until it
+ * is given back to that driver through the completion callback.
+ *
+ * Each request is turned into one or more packets.  The controller driver
+ * never merges adjacent requests into the same packet.  OUT transfers
+ * will sometimes use data that's already buffered in the hardware.
+ * Drivers can rely on the fact that the first byte of the request's buffer
+ * always corresponds to the first byte of some USB packet, for both
+ * IN and OUT transfers.
+ *
+ * Bulk endpoints can queue any amount of data; the transfer is packetized
+ * automatically.  The last packet will be short if the request doesn't fill it
+ * out completely.  Zero length packets (ZLPs) should be avoided in portable
+ * protocols since not all usb hardware can successfully handle zero length
+ * packets.  (ZLPs may be explicitly written, and may be implicitly written if
+ * the request 'zero' flag is set.)  Bulk endpoints may also be used
+ * for interrupt transfers; but the reverse is not true, and some endpoints
+ * won't support every interrupt transfer.  (Such as 768 byte packets.)
+ *
+ * Interrupt-only endpoints are less functional than bulk endpoints, for
+ * example by not supporting queueing or not handling buffers that are
+ * larger than the endpoint's maxpacket size.  They may also treat data
+ * toggle differently.
+ *
+ * Control endpoints ... after getting a setup() callback, the driver queues
+ * one response (even if it would be zero length).  That enables the
+ * status ack, after transferring data as specified in the response.  Setup
+ * functions may return negative error codes to generate protocol stalls.
+ * (Note that some USB device controllers disallow protocol stall responses
+ * in some cases.)  When control responses are deferred (the response is
+ * written after the setup callback returns), then usb_ep_set_halt() may be
+ * used on ep0 to trigger protocol stalls.  Depending on the controller,
+ * it may not be possible to trigger a status-stage protocol stall when the
+ * data stage is over, that is, from within the response's completion
+ * routine.
+ *
+ * For periodic endpoints, like interrupt or isochronous ones, the usb host
+ * arranges to poll once per interval, and the gadget driver usually will
+ * have queued some data to transfer at that time.
+ *
+ * Returns zero, or a negative error code.  Endpoints that are not enabled
+ * report errors; errors will also be
+ * reported when the usb peripheral is disconnected.
+ */
+int usb_ep_queue(struct usb_ep *ep,
+			       struct usb_request *req, gfp_t gfp_flags)
+{
+	int ret = 0;
+
+	if (WARN_ON_ONCE(!ep->enabled && ep->address)) {
+		ret = -ESHUTDOWN;
+		goto out;
+	}
+
+	ret = ep->ops->queue(ep, req, gfp_flags);
+
+out:
+	trace_usb_ep_queue(ep, req, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_ep_queue);
+
+/**
+ * usb_ep_dequeue - dequeues (cancels, unlinks) an I/O request from an endpoint
+ * @ep:the endpoint associated with the request
+ * @req:the request being canceled
+ *
+ * If the request is still active on the endpoint, it is dequeued and its
+ * completion routine is called (with status -ECONNRESET); else a negative
+ * error code is returned. This is guaranteed to happen before the call to
+ * usb_ep_dequeue() returns.
+ *
+ * Note that some hardware can't clear out write fifos (to unlink the request
+ * at the head of the queue) except as part of disconnecting from usb. Such
+ * restrictions prevent drivers from supporting configuration changes,
+ * even to configuration zero (a "chapter 9" requirement).
+ */
+int usb_ep_dequeue(struct usb_ep *ep, struct usb_request *req)
+{
+	int ret;
+
+	ret = ep->ops->dequeue(ep, req);
+	trace_usb_ep_dequeue(ep, req, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_ep_dequeue);
+
+/**
+ * usb_ep_set_halt - sets the endpoint halt feature.
+ * @ep: the non-isochronous endpoint being stalled
+ *
+ * Use this to stall an endpoint, perhaps as an error report.
+ * Except for control endpoints,
+ * the endpoint stays halted (will not stream any data) until the host
+ * clears this feature; drivers may need to empty the endpoint's request
+ * queue first, to make sure no inappropriate transfers happen.
+ *
+ * Note that while an endpoint CLEAR_FEATURE will be invisible to the
+ * gadget driver, a SET_INTERFACE will not be.  To reset endpoints for the
+ * current altsetting, see usb_ep_clear_halt().  When switching altsettings,
+ * it's simplest to use usb_ep_enable() or usb_ep_disable() for the endpoints.
+ *
+ * Returns zero, or a negative error code.  On success, this call sets
+ * underlying hardware state that blocks data transfers.
+ * Attempts to halt IN endpoints will fail (returning -EAGAIN) if any
+ * transfer requests are still queued, or if the controller hardware
+ * (usually a FIFO) still holds bytes that the host hasn't collected.
+ */
+int usb_ep_set_halt(struct usb_ep *ep)
+{
+	int ret;
+
+	ret = ep->ops->set_halt(ep, 1);
+	trace_usb_ep_set_halt(ep, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_ep_set_halt);
+
+/**
+ * usb_ep_clear_halt - clears endpoint halt, and resets toggle
+ * @ep:the bulk or interrupt endpoint being reset
+ *
+ * Use this when responding to the standard usb "set interface" request,
+ * for endpoints that aren't reconfigured, after clearing any other state
+ * in the endpoint's i/o queue.
+ *
+ * Returns zero, or a negative error code.  On success, this call clears
+ * the underlying hardware state reflecting endpoint halt and data toggle.
+ * Note that some hardware can't support this request (like pxa2xx_udc),
+ * and accordingly can't correctly implement interface altsettings.
+ */
+int usb_ep_clear_halt(struct usb_ep *ep)
+{
+	int ret;
+
+	ret = ep->ops->set_halt(ep, 0);
+	trace_usb_ep_clear_halt(ep, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_ep_clear_halt);
+
+/**
+ * usb_ep_set_wedge - sets the halt feature and ignores clear requests
+ * @ep: the endpoint being wedged
+ *
+ * Use this to stall an endpoint and ignore CLEAR_FEATURE(HALT_ENDPOINT)
+ * requests. If the gadget driver clears the halt status, it will
+ * automatically unwedge the endpoint.
+ *
+ * Returns zero on success, else negative errno.
+ */
+int usb_ep_set_wedge(struct usb_ep *ep)
+{
+	int ret;
+
+	if (ep->ops->set_wedge)
+		ret = ep->ops->set_wedge(ep);
+	else
+		ret = ep->ops->set_halt(ep, 1);
+
+	trace_usb_ep_set_wedge(ep, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_ep_set_wedge);
+
+/**
+ * usb_ep_fifo_status - returns number of bytes in fifo, or error
+ * @ep: the endpoint whose fifo status is being checked.
+ *
+ * FIFO endpoints may have "unclaimed data" in them in certain cases,
+ * such as after aborted transfers.  Hosts may not have collected all
+ * the IN data written by the gadget driver (and reported by a request
+ * completion).  The gadget driver may not have collected all the data
+ * written OUT to it by the host.  Drivers that need precise handling for
+ * fault reporting or recovery may need to use this call.
+ *
+ * This returns the number of such bytes in the fifo, or a negative
+ * errno if the endpoint doesn't use a FIFO or doesn't support such
+ * precise handling.
+ */
+int usb_ep_fifo_status(struct usb_ep *ep)
+{
+	int ret;
+
+	if (ep->ops->fifo_status)
+		ret = ep->ops->fifo_status(ep);
+	else
+		ret = -EOPNOTSUPP;
+
+	trace_usb_ep_fifo_status(ep, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_ep_fifo_status);
+
+/**
+ * usb_ep_fifo_flush - flushes contents of a fifo
+ * @ep: the endpoint whose fifo is being flushed.
+ *
+ * This call may be used to flush the "unclaimed data" that may exist in
+ * an endpoint fifo after abnormal transaction terminations.  The call
+ * must never be used except when endpoint is not being used for any
+ * protocol translation.
+ */
+void usb_ep_fifo_flush(struct usb_ep *ep)
+{
+	if (ep->ops->fifo_flush)
+		ep->ops->fifo_flush(ep);
+
+	trace_usb_ep_fifo_flush(ep, 0);
+}
+EXPORT_SYMBOL_GPL(usb_ep_fifo_flush);
+
+/* ------------------------------------------------------------------------- */
+
+/**
+ * usb_gadget_frame_number - returns the current frame number
+ * @gadget: controller that reports the frame number
+ *
+ * Returns the usb frame number, normally eleven bits from a SOF packet,
+ * or negative errno if this device doesn't support this capability.
+ */
+int usb_gadget_frame_number(struct usb_gadget *gadget)
+{
+	int ret;
+
+	ret = gadget->ops->get_frame(gadget);
+
+	trace_usb_gadget_frame_number(gadget, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_frame_number);
+
+/**
+ * usb_gadget_wakeup - tries to wake up the host connected to this gadget
+ * @gadget: controller used to wake up the host
+ *
+ * Returns zero on success, else negative error code if the hardware
+ * doesn't support such attempts, or its support has not been enabled
+ * by the usb host.  Drivers must return device descriptors that report
+ * their ability to support this, or hosts won't enable it.
+ *
+ * This may also try to use SRP to wake the host and start enumeration,
+ * even if OTG isn't otherwise in use.  OTG devices may also start
+ * remote wakeup even when hosts don't explicitly enable it.
+ */
+int usb_gadget_wakeup(struct usb_gadget *gadget)
+{
+	int ret = 0;
+
+	if (!gadget->ops->wakeup) {
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	ret = gadget->ops->wakeup(gadget);
+
+out:
+	trace_usb_gadget_wakeup(gadget, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_wakeup);
+
+/**
+ * usb_gadget_set_selfpowered - sets the device selfpowered feature.
+ * @gadget:the device being declared as self-powered
+ *
+ * this affects the device status reported by the hardware driver
+ * to reflect that it now has a local power supply.
+ *
+ * returns zero on success, else negative errno.
+ */
+int usb_gadget_set_selfpowered(struct usb_gadget *gadget)
+{
+	int ret = 0;
+
+	if (!gadget->ops->set_selfpowered) {
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	ret = gadget->ops->set_selfpowered(gadget, 1);
+
+out:
+	trace_usb_gadget_set_selfpowered(gadget, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_set_selfpowered);
+
+/**
+ * usb_gadget_clear_selfpowered - clear the device selfpowered feature.
+ * @gadget:the device being declared as bus-powered
+ *
+ * this affects the device status reported by the hardware driver.
+ * some hardware may not support bus-powered operation, in which
+ * case this feature's value can never change.
+ *
+ * returns zero on success, else negative errno.
+ */
+int usb_gadget_clear_selfpowered(struct usb_gadget *gadget)
+{
+	int ret = 0;
+
+	if (!gadget->ops->set_selfpowered) {
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	ret = gadget->ops->set_selfpowered(gadget, 0);
+
+out:
+	trace_usb_gadget_clear_selfpowered(gadget, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_clear_selfpowered);
+
+/**
+ * usb_gadget_vbus_connect - Notify controller that VBUS is powered
+ * @gadget:The device which now has VBUS power.
+ * Context: can sleep
+ *
+ * This call is used by a driver for an external transceiver (or GPIO)
+ * that detects a VBUS power session starting.  Common responses include
+ * resuming the controller, activating the D+ (or D-) pullup to let the
+ * host detect that a USB device is attached, and starting to draw power
+ * (8mA or possibly more, especially after SET_CONFIGURATION).
+ *
+ * Returns zero on success, else negative errno.
+ */
+int usb_gadget_vbus_connect(struct usb_gadget *gadget)
+{
+	int ret = 0;
+
+	if (!gadget->ops->vbus_session) {
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	ret = gadget->ops->vbus_session(gadget, 1);
+
+out:
+	trace_usb_gadget_vbus_connect(gadget, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_vbus_connect);
+
+/**
+ * usb_gadget_vbus_draw - constrain controller's VBUS power usage
+ * @gadget:The device whose VBUS usage is being described
+ * @mA:How much current to draw, in milliAmperes.  This should be twice
+ *	the value listed in the configuration descriptor bMaxPower field.
+ *
+ * This call is used by gadget drivers during SET_CONFIGURATION calls,
+ * reporting how much power the device may consume.  For example, this
+ * could affect how quickly batteries are recharged.
+ *
+ * Returns zero on success, else negative errno.
+ */
+int usb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA)
+{
+	int ret = 0;
+
+	if (!gadget->ops->vbus_draw) {
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	ret = gadget->ops->vbus_draw(gadget, mA);
+	if (!ret)
+		gadget->mA = mA;
+
+out:
+	trace_usb_gadget_vbus_draw(gadget, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_vbus_draw);
+
+/**
+ * usb_gadget_vbus_disconnect - notify controller about VBUS session end
+ * @gadget:the device whose VBUS supply is being described
+ * Context: can sleep
+ *
+ * This call is used by a driver for an external transceiver (or GPIO)
+ * that detects a VBUS power session ending.  Common responses include
+ * reversing everything done in usb_gadget_vbus_connect().
+ *
+ * Returns zero on success, else negative errno.
+ */
+int usb_gadget_vbus_disconnect(struct usb_gadget *gadget)
+{
+	int ret = 0;
+
+	if (!gadget->ops->vbus_session) {
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	ret = gadget->ops->vbus_session(gadget, 0);
+
+out:
+	trace_usb_gadget_vbus_disconnect(gadget, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_vbus_disconnect);
+
+/**
+ * usb_gadget_connect - software-controlled connect to USB host
+ * @gadget:the peripheral being connected
+ *
+ * Enables the D+ (or potentially D-) pullup.  The host will start
+ * enumerating this gadget when the pullup is active and a VBUS session
+ * is active (the link is powered).  This pullup is always enabled unless
+ * usb_gadget_disconnect() has been used to disable it.
+ *
+ * Returns zero on success, else negative errno.
+ */
+int usb_gadget_connect(struct usb_gadget *gadget)
+{
+	int ret = 0;
+
+	if (!gadget->ops->pullup) {
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	if (gadget->deactivated) {
+		/*
+		 * If gadget is deactivated we only save new state.
+		 * Gadget will be connected automatically after activation.
+		 */
+		gadget->connected = true;
+		goto out;
+	}
+
+	ret = gadget->ops->pullup(gadget, 1);
+	if (!ret)
+		gadget->connected = 1;
+
+out:
+	trace_usb_gadget_connect(gadget, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_connect);
+
+/**
+ * usb_gadget_disconnect - software-controlled disconnect from USB host
+ * @gadget:the peripheral being disconnected
+ *
+ * Disables the D+ (or potentially D-) pullup, which the host may see
+ * as a disconnect (when a VBUS session is active).  Not all systems
+ * support software pullup controls.
+ *
+ * Returns zero on success, else negative errno.
+ */
+int usb_gadget_disconnect(struct usb_gadget *gadget)
+{
+	int ret = 0;
+
+	if (!gadget->ops->pullup) {
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	if (gadget->deactivated) {
+		/*
+		 * If gadget is deactivated we only save new state.
+		 * Gadget will stay disconnected after activation.
+		 */
+		gadget->connected = false;
+		goto out;
+	}
+
+	ret = gadget->ops->pullup(gadget, 0);
+	if (!ret)
+		gadget->connected = 0;
+
+out:
+	trace_usb_gadget_disconnect(gadget, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_disconnect);
+
+/**
+ * usb_gadget_deactivate - deactivate function which is not ready to work
+ * @gadget: the peripheral being deactivated
+ *
+ * This routine may be used during the gadget driver bind() call to prevent
+ * the peripheral from ever being visible to the USB host, unless later
+ * usb_gadget_activate() is called.  For example, user mode components may
+ * need to be activated before the system can talk to hosts.
+ *
+ * Returns zero on success, else negative errno.
+ */
+int usb_gadget_deactivate(struct usb_gadget *gadget)
+{
+	int ret = 0;
+
+	if (gadget->deactivated)
+		goto out;
+
+	if (gadget->connected) {
+		ret = usb_gadget_disconnect(gadget);
+		if (ret)
+			goto out;
+
+		/*
+		 * If gadget was being connected before deactivation, we want
+		 * to reconnect it in usb_gadget_activate().
+		 */
+		gadget->connected = true;
+	}
+	gadget->deactivated = true;
+
+out:
+	trace_usb_gadget_deactivate(gadget, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_deactivate);
+
+/**
+ * usb_gadget_activate - activate function which is not ready to work
+ * @gadget: the peripheral being activated
+ *
+ * This routine activates gadget which was previously deactivated with
+ * usb_gadget_deactivate() call. It calls usb_gadget_connect() if needed.
+ *
+ * Returns zero on success, else negative errno.
+ */
+int usb_gadget_activate(struct usb_gadget *gadget)
+{
+	int ret = 0;
+
+	if (!gadget->deactivated)
+		goto out;
+
+	gadget->deactivated = false;
+
+	/*
+	 * If gadget has been connected before deactivation, or became connected
+	 * while it was being deactivated, we call usb_gadget_connect().
+	 */
+	if (gadget->connected)
+		ret = usb_gadget_connect(gadget);
+
+out:
+	trace_usb_gadget_activate(gadget, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_activate);
+
+/* ------------------------------------------------------------------------- */
+
+#ifdef	CONFIG_HAS_DMA
+
+int usb_gadget_map_request_by_dev(struct device *dev,
+		struct usb_request *req, int is_in)
+{
+	if (req->length == 0)
+		return 0;
+
+	if (req->num_sgs) {
+		int     mapped;
+
+		mapped = dma_map_sg(dev, req->sg, req->num_sgs,
+				is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+		if (mapped == 0) {
+			dev_err(dev, "failed to map SGs\n");
+			return -EFAULT;
+		}
+
+		req->num_mapped_sgs = mapped;
+	} else {
+		req->dma = dma_map_single(dev, req->buf, req->length,
+				is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+
+		if (dma_mapping_error(dev, req->dma)) {
+			dev_err(dev, "failed to map buffer\n");
+			return -EFAULT;
+		}
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_map_request_by_dev);
+
+int usb_gadget_map_request(struct usb_gadget *gadget,
+		struct usb_request *req, int is_in)
+{
+	return usb_gadget_map_request_by_dev(gadget->dev.parent, req, is_in);
+}
+EXPORT_SYMBOL_GPL(usb_gadget_map_request);
+
+void usb_gadget_unmap_request_by_dev(struct device *dev,
+		struct usb_request *req, int is_in)
+{
+	if (req->length == 0)
+		return;
+
+	if (req->num_mapped_sgs) {
+		dma_unmap_sg(dev, req->sg, req->num_mapped_sgs,
+				is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+
+		req->num_mapped_sgs = 0;
+	} else {
+		dma_unmap_single(dev, req->dma, req->length,
+				is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+	}
+}
+EXPORT_SYMBOL_GPL(usb_gadget_unmap_request_by_dev);
+
+void usb_gadget_unmap_request(struct usb_gadget *gadget,
+		struct usb_request *req, int is_in)
+{
+	usb_gadget_unmap_request_by_dev(gadget->dev.parent, req, is_in);
+}
+EXPORT_SYMBOL_GPL(usb_gadget_unmap_request);
+
+#endif	/* CONFIG_HAS_DMA */
+
+/* ------------------------------------------------------------------------- */
+
+/**
+ * usb_gadget_giveback_request - give the request back to the gadget layer
+ * Context: in_interrupt()
+ *
+ * This is called by device controller drivers in order to return the
+ * completed request back to the gadget layer.
+ */
+void usb_gadget_giveback_request(struct usb_ep *ep,
+		struct usb_request *req)
+{
+	if (likely(req->status == 0))
+		usb_led_activity(USB_LED_EVENT_GADGET);
+
+	trace_usb_gadget_giveback_request(ep, req, 0);
+
+	req->complete(ep, req);
+}
+EXPORT_SYMBOL_GPL(usb_gadget_giveback_request);
+
+/* ------------------------------------------------------------------------- */
+
+/**
+ * gadget_find_ep_by_name - returns ep whose name is the same as sting passed
+ *	in second parameter or NULL if searched endpoint not found
+ * @g: controller to check for quirk
+ * @name: name of searched endpoint
+ */
+struct usb_ep *gadget_find_ep_by_name(struct usb_gadget *g, const char *name)
+{
+	struct usb_ep *ep;
+
+	gadget_for_each_ep(ep, g) {
+		if (!strcmp(ep->name, name))
+			return ep;
+	}
+
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(gadget_find_ep_by_name);
+
+/* ------------------------------------------------------------------------- */
+
+int usb_gadget_ep_match_desc(struct usb_gadget *gadget,
+		struct usb_ep *ep, struct usb_endpoint_descriptor *desc,
+		struct usb_ss_ep_comp_descriptor *ep_comp)
+{
+	u8		type;
+	u16		max;
+	int		num_req_streams = 0;
+
+	/* endpoint already claimed? */
+	if (ep->claimed)
+		return 0;
+
+	type = usb_endpoint_type(desc);
+	max = 0x7ff & usb_endpoint_maxp(desc);
+
+	if (usb_endpoint_dir_in(desc) && !ep->caps.dir_in)
+		return 0;
+	if (usb_endpoint_dir_out(desc) && !ep->caps.dir_out)
+		return 0;
+
+	if (max > ep->maxpacket_limit)
+		return 0;
+
+	/* "high bandwidth" works only at high speed */
+	if (!gadget_is_dualspeed(gadget) && usb_endpoint_maxp(desc) & (3<<11))
+		return 0;
+
+	switch (type) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		/* only support ep0 for portable CONTROL traffic */
+		return 0;
+	case USB_ENDPOINT_XFER_ISOC:
+		if (!ep->caps.type_iso)
+			return 0;
+		/* ISO:  limit 1023 bytes full speed, 1024 high/super speed */
+		if (!gadget_is_dualspeed(gadget) && max > 1023)
+			return 0;
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		if (!ep->caps.type_bulk)
+			return 0;
+		if (ep_comp && gadget_is_superspeed(gadget)) {
+			/* Get the number of required streams from the
+			 * EP companion descriptor and see if the EP
+			 * matches it
+			 */
+			num_req_streams = ep_comp->bmAttributes & 0x1f;
+			if (num_req_streams > ep->max_streams)
+				return 0;
+		}
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		/* Bulk endpoints handle interrupt transfers,
+		 * except the toggle-quirky iso-synch kind
+		 */
+		if (!ep->caps.type_int && !ep->caps.type_bulk)
+			return 0;
+		/* INT:  limit 64 bytes full speed, 1024 high/super speed */
+		if (!gadget_is_dualspeed(gadget) && max > 64)
+			return 0;
+		break;
+	}
+
+	return 1;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_ep_match_desc);
+
+/* ------------------------------------------------------------------------- */
+
+static void usb_gadget_state_work(struct work_struct *work)
+{
+	struct usb_gadget *gadget = work_to_gadget(work);
+	struct usb_udc *udc = gadget->udc;
+
+	if (udc)
+		sysfs_notify(&udc->dev.kobj, NULL, "state");
+}
+
+void usb_gadget_set_state(struct usb_gadget *gadget,
+		enum usb_device_state state)
+{
+	gadget->state = state;
+	schedule_work(&gadget->work);
+}
+EXPORT_SYMBOL_GPL(usb_gadget_set_state);
+
+/* ------------------------------------------------------------------------- */
+
+static void usb_udc_connect_control(struct usb_udc *udc)
+{
+	if (udc->vbus)
+		usb_gadget_connect(udc->gadget);
+	else
+		usb_gadget_disconnect(udc->gadget);
+}
+
+/**
+ * usb_udc_vbus_handler - updates the udc core vbus status, and try to
+ * connect or disconnect gadget
+ * @gadget: The gadget which vbus change occurs
+ * @status: The vbus status
+ *
+ * The udc driver calls it when it wants to connect or disconnect gadget
+ * according to vbus status.
+ */
+void usb_udc_vbus_handler(struct usb_gadget *gadget, bool status)
+{
+	struct usb_udc *udc = gadget->udc;
+
+	if (udc) {
+		udc->vbus = status;
+		usb_udc_connect_control(udc);
+	}
+}
+EXPORT_SYMBOL_GPL(usb_udc_vbus_handler);
+
+/**
+ * usb_gadget_udc_reset - notifies the udc core that bus reset occurs
+ * @gadget: The gadget which bus reset occurs
+ * @driver: The gadget driver we want to notify
+ *
+ * If the udc driver has bus reset handler, it needs to call this when the bus
+ * reset occurs, it notifies the gadget driver that the bus reset occurs as
+ * well as updates gadget state.
+ */
+void usb_gadget_udc_reset(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
+{
+	driver->reset(gadget);
+	usb_gadget_set_state(gadget, USB_STATE_DEFAULT);
+}
+EXPORT_SYMBOL_GPL(usb_gadget_udc_reset);
+
+/**
+ * usb_gadget_udc_start - tells usb device controller to start up
+ * @udc: The UDC to be started
+ *
+ * This call is issued by the UDC Class driver when it's about
+ * to register a gadget driver to the device controller, before
+ * calling gadget driver's bind() method.
+ *
+ * It allows the controller to be powered off until strictly
+ * necessary to have it powered on.
+ *
+ * Returns zero on success, else negative errno.
+ */
+static inline int usb_gadget_udc_start(struct usb_udc *udc)
+{
+	return udc->gadget->ops->udc_start(udc->gadget, udc->driver);
+}
+
+/**
+ * usb_gadget_udc_stop - tells usb device controller we don't need it anymore
+ * @gadget: The device we want to stop activity
+ * @driver: The driver to unbind from @gadget
+ *
+ * This call is issued by the UDC Class driver after calling
+ * gadget driver's unbind() method.
+ *
+ * The details are implementation specific, but it can go as
+ * far as powering off UDC completely and disable its data
+ * line pullups.
+ */
+static inline void usb_gadget_udc_stop(struct usb_udc *udc)
+{
+	udc->gadget->ops->udc_stop(udc->gadget);
+}
+
+/**
+ * usb_udc_release - release the usb_udc struct
+ * @dev: the dev member within usb_udc
+ *
+ * This is called by driver's core in order to free memory once the last
+ * reference is released.
+ */
+static void usb_udc_release(struct device *dev)
+{
+	struct usb_udc *udc;
+
+	udc = container_of(dev, struct usb_udc, dev);
+	dev_dbg(dev, "releasing '%s'\n", dev_name(dev));
+	kfree(udc);
+}
+
+static const struct attribute_group *usb_udc_attr_groups[];
+
+static void usb_udc_nop_release(struct device *dev)
+{
+	dev_vdbg(dev, "%s\n", __func__);
+}
+
+/**
+ * usb_add_gadget_udc_release - adds a new gadget to the udc class driver list
+ * @parent: the parent device to this udc. Usually the controller driver's
+ * device.
+ * @gadget: the gadget to be added to the list.
+ * @release: a gadget release function.
+ *
+ * Returns zero on success, negative errno otherwise.
+ */
+int usb_add_gadget_udc_release(struct device *parent, struct usb_gadget *gadget,
+		void (*release)(struct device *dev))
+{
+	struct usb_udc		*udc;
+	struct usb_gadget_driver *driver;
+	int			ret = -ENOMEM;
+
+	udc = kzalloc(sizeof(*udc), GFP_KERNEL);
+	if (!udc)
+		goto err1;
+
+	dev_set_name(&gadget->dev, "gadget");
+	INIT_WORK(&gadget->work, usb_gadget_state_work);
+	gadget->dev.parent = parent;
+
+	if (release)
+		gadget->dev.release = release;
+	else
+		gadget->dev.release = usb_udc_nop_release;
+
+	ret = device_register(&gadget->dev);
+	if (ret)
+		goto err2;
+
+	device_initialize(&udc->dev);
+	udc->dev.release = usb_udc_release;
+	udc->dev.class = udc_class;
+	udc->dev.groups = usb_udc_attr_groups;
+	udc->dev.parent = parent;
+	ret = dev_set_name(&udc->dev, "%s", kobject_name(&parent->kobj));
+	if (ret)
+		goto err3;
+
+	udc->gadget = gadget;
+	gadget->udc = udc;
+
+	mutex_lock(&udc_lock);
+	list_add_tail(&udc->list, &udc_list);
+
+	ret = device_add(&udc->dev);
+	if (ret)
+		goto err4;
+
+	usb_gadget_set_state(gadget, USB_STATE_NOTATTACHED);
+	udc->vbus = true;
+
+	/* pick up one of pending gadget drivers */
+	list_for_each_entry(driver, &gadget_driver_pending_list, pending) {
+		if (!driver->udc_name || strcmp(driver->udc_name,
+						dev_name(&udc->dev)) == 0) {
+			ret = udc_bind_to_driver(udc, driver);
+			if (ret != -EPROBE_DEFER)
+				list_del(&driver->pending);
+			if (ret)
+				goto err4;
+			break;
+		}
+	}
+
+	mutex_unlock(&udc_lock);
+
+	return 0;
+
+err4:
+	list_del(&udc->list);
+	mutex_unlock(&udc_lock);
+
+err3:
+	put_device(&udc->dev);
+	device_del(&gadget->dev);
+
+err2:
+	put_device(&gadget->dev);
+	kfree(udc);
+
+err1:
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_add_gadget_udc_release);
+
+/**
+ * usb_get_gadget_udc_name - get the name of the first UDC controller
+ * This functions returns the name of the first UDC controller in the system.
+ * Please note that this interface is usefull only for legacy drivers which
+ * assume that there is only one UDC controller in the system and they need to
+ * get its name before initialization. There is no guarantee that the UDC
+ * of the returned name will be still available, when gadget driver registers
+ * itself.
+ *
+ * Returns pointer to string with UDC controller name on success, NULL
+ * otherwise. Caller should kfree() returned string.
+ */
+char *usb_get_gadget_udc_name(void)
+{
+	struct usb_udc *udc;
+	char *name = NULL;
+
+	/* For now we take the first available UDC */
+	mutex_lock(&udc_lock);
+	list_for_each_entry(udc, &udc_list, list) {
+		if (!udc->driver) {
+			name = kstrdup(udc->gadget->name, GFP_KERNEL);
+			break;
+		}
+	}
+	mutex_unlock(&udc_lock);
+	return name;
+}
+EXPORT_SYMBOL_GPL(usb_get_gadget_udc_name);
+
+/**
+ * usb_add_gadget_udc - adds a new gadget to the udc class driver list
+ * @parent: the parent device to this udc. Usually the controller
+ * driver's device.
+ * @gadget: the gadget to be added to the list
+ *
+ * Returns zero on success, negative errno otherwise.
+ */
+int usb_add_gadget_udc(struct device *parent, struct usb_gadget *gadget)
+{
+	return usb_add_gadget_udc_release(parent, gadget, NULL);
+}
+EXPORT_SYMBOL_GPL(usb_add_gadget_udc);
+
+static void usb_gadget_remove_driver(struct usb_udc *udc)
+{
+	dev_dbg(&udc->dev, "unregistering UDC driver [%s]\n",
+			udc->driver->function);
+
+	kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE);
+
+	usb_gadget_disconnect(udc->gadget);
+	udc->driver->disconnect(udc->gadget);
+	udc->driver->unbind(udc->gadget);
+	usb_gadget_udc_stop(udc);
+
+	udc->driver = NULL;
+	udc->dev.driver = NULL;
+	udc->gadget->dev.driver = NULL;
+}
+
+/**
+ * usb_del_gadget_udc - deletes @udc from udc_list
+ * @gadget: the gadget to be removed.
+ *
+ * This, will call usb_gadget_unregister_driver() if
+ * the @udc is still busy.
+ */
+void usb_del_gadget_udc(struct usb_gadget *gadget)
+{
+	struct usb_udc *udc = gadget->udc;
+
+	if (!udc)
+		return;
+
+	dev_vdbg(gadget->dev.parent, "unregistering gadget\n");
+
+	mutex_lock(&udc_lock);
+	list_del(&udc->list);
+
+	if (udc->driver) {
+		struct usb_gadget_driver *driver = udc->driver;
+
+		usb_gadget_remove_driver(udc);
+		list_add(&driver->pending, &gadget_driver_pending_list);
+	}
+	mutex_unlock(&udc_lock);
+
+	kobject_uevent(&udc->dev.kobj, KOBJ_REMOVE);
+	flush_work(&gadget->work);
+	device_unregister(&udc->dev);
+	device_unregister(&gadget->dev);
+}
+EXPORT_SYMBOL_GPL(usb_del_gadget_udc);
+
+/* ------------------------------------------------------------------------- */
+
+static int udc_bind_to_driver(struct usb_udc *udc, struct usb_gadget_driver *driver)
+{
+	int ret;
+
+	dev_dbg(&udc->dev, "registering UDC driver [%s]\n",
+			driver->function);
+
+	udc->driver = driver;
+	udc->dev.driver = &driver->driver;
+	udc->gadget->dev.driver = &driver->driver;
+
+	ret = driver->bind(udc->gadget, driver);
+	if (ret)
+		goto err1;
+	ret = usb_gadget_udc_start(udc);
+	if (ret) {
+		driver->unbind(udc->gadget);
+		goto err1;
+	}
+	usb_udc_connect_control(udc);
+
+	kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE);
+	return 0;
+err1:
+	if (ret != -EISNAM)
+		dev_err(&udc->dev, "failed to start %s: %d\n",
+			udc->driver->function, ret);
+	udc->driver = NULL;
+	udc->dev.driver = NULL;
+	udc->gadget->dev.driver = NULL;
+	return ret;
+}
+
+int usb_gadget_probe_driver(struct usb_gadget_driver *driver)
+{
+	struct usb_udc		*udc = NULL;
+	int			ret = -ENODEV;
+
+	if (!driver || !driver->bind || !driver->setup)
+		return -EINVAL;
+
+	mutex_lock(&udc_lock);
+	if (driver->udc_name) {
+		list_for_each_entry(udc, &udc_list, list) {
+			ret = strcmp(driver->udc_name, dev_name(&udc->dev));
+			if (!ret)
+				break;
+		}
+		if (!ret && !udc->driver)
+			goto found;
+	} else {
+		list_for_each_entry(udc, &udc_list, list) {
+			/* For now we take the first one */
+			if (!udc->driver)
+				goto found;
+		}
+	}
+
+	if (!driver->match_existing_only) {
+		list_add_tail(&driver->pending, &gadget_driver_pending_list);
+		pr_info("udc-core: couldn't find an available UDC - added [%s] to list of pending drivers\n",
+			driver->function);
+		ret = 0;
+	}
+
+	mutex_unlock(&udc_lock);
+	return ret;
+found:
+	ret = udc_bind_to_driver(udc, driver);
+	mutex_unlock(&udc_lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_probe_driver);
+
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+{
+	struct usb_udc		*udc = NULL;
+	int			ret = -ENODEV;
+
+	if (!driver || !driver->unbind)
+		return -EINVAL;
+
+	mutex_lock(&udc_lock);
+	list_for_each_entry(udc, &udc_list, list)
+		if (udc->driver == driver) {
+			usb_gadget_remove_driver(udc);
+			usb_gadget_set_state(udc->gadget,
+					USB_STATE_NOTATTACHED);
+			ret = 0;
+			break;
+		}
+
+	if (ret) {
+		list_del(&driver->pending);
+		ret = 0;
+	}
+	mutex_unlock(&udc_lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_unregister_driver);
+
+/* ------------------------------------------------------------------------- */
+
+static ssize_t usb_udc_srp_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t n)
+{
+	struct usb_udc		*udc = container_of(dev, struct usb_udc, dev);
+
+	if (sysfs_streq(buf, "1"))
+		usb_gadget_wakeup(udc->gadget);
+
+	return n;
+}
+static DEVICE_ATTR(srp, S_IWUSR, NULL, usb_udc_srp_store);
+
+static ssize_t usb_udc_softconn_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t n)
+{
+	struct usb_udc		*udc = container_of(dev, struct usb_udc, dev);
+
+	if (!udc->driver) {
+		dev_err(dev, "soft-connect without a gadget driver\n");
+		return -EOPNOTSUPP;
+	}
+
+	if (sysfs_streq(buf, "connect")) {
+		usb_gadget_udc_start(udc);
+		usb_gadget_connect(udc->gadget);
+	} else if (sysfs_streq(buf, "disconnect")) {
+		usb_gadget_disconnect(udc->gadget);
+		udc->driver->disconnect(udc->gadget);
+		usb_gadget_udc_stop(udc);
+	} else {
+		dev_err(dev, "unsupported command '%s'\n", buf);
+		return -EINVAL;
+	}
+
+	return n;
+}
+static DEVICE_ATTR(soft_connect, S_IWUSR, NULL, usb_udc_softconn_store);
+
+static ssize_t state_show(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	struct usb_udc		*udc = container_of(dev, struct usb_udc, dev);
+	struct usb_gadget	*gadget = udc->gadget;
+
+	return sprintf(buf, "%s\n", usb_state_string(gadget->state));
+}
+static DEVICE_ATTR_RO(state);
+
+#define USB_UDC_SPEED_ATTR(name, param)					\
+ssize_t name##_show(struct device *dev,					\
+		struct device_attribute *attr, char *buf)		\
+{									\
+	struct usb_udc *udc = container_of(dev, struct usb_udc, dev);	\
+	return snprintf(buf, PAGE_SIZE, "%s\n",				\
+			usb_speed_string(udc->gadget->param));		\
+}									\
+static DEVICE_ATTR_RO(name)
+
+static USB_UDC_SPEED_ATTR(current_speed, speed);
+static USB_UDC_SPEED_ATTR(maximum_speed, max_speed);
+
+#define USB_UDC_ATTR(name)					\
+ssize_t name##_show(struct device *dev,				\
+		struct device_attribute *attr, char *buf)	\
+{								\
+	struct usb_udc		*udc = container_of(dev, struct usb_udc, dev); \
+	struct usb_gadget	*gadget = udc->gadget;		\
+								\
+	return snprintf(buf, PAGE_SIZE, "%d\n", gadget->name);	\
+}								\
+static DEVICE_ATTR_RO(name)
+
+static USB_UDC_ATTR(is_otg);
+static USB_UDC_ATTR(is_a_peripheral);
+static USB_UDC_ATTR(b_hnp_enable);
+static USB_UDC_ATTR(a_hnp_support);
+static USB_UDC_ATTR(a_alt_hnp_support);
+static USB_UDC_ATTR(is_selfpowered);
+
+static struct attribute *usb_udc_attrs[] = {
+	&dev_attr_srp.attr,
+	&dev_attr_soft_connect.attr,
+	&dev_attr_state.attr,
+	&dev_attr_current_speed.attr,
+	&dev_attr_maximum_speed.attr,
+
+	&dev_attr_is_otg.attr,
+	&dev_attr_is_a_peripheral.attr,
+	&dev_attr_b_hnp_enable.attr,
+	&dev_attr_a_hnp_support.attr,
+	&dev_attr_a_alt_hnp_support.attr,
+	&dev_attr_is_selfpowered.attr,
+	NULL,
+};
+
+static const struct attribute_group usb_udc_attr_group = {
+	.attrs = usb_udc_attrs,
+};
+
+static const struct attribute_group *usb_udc_attr_groups[] = {
+	&usb_udc_attr_group,
+	NULL,
+};
+
+static int usb_udc_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+	struct usb_udc		*udc = container_of(dev, struct usb_udc, dev);
+	int			ret;
+
+	ret = add_uevent_var(env, "USB_UDC_NAME=%s", udc->gadget->name);
+	if (ret) {
+		dev_err(dev, "failed to add uevent USB_UDC_NAME\n");
+		return ret;
+	}
+
+	if (udc->driver) {
+		ret = add_uevent_var(env, "USB_UDC_DRIVER=%s",
+				udc->driver->function);
+		if (ret) {
+			dev_err(dev, "failed to add uevent USB_UDC_DRIVER\n");
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int __init usb_udc_init(void)
+{
+	udc_class = class_create(THIS_MODULE, "udc");
+	if (IS_ERR(udc_class)) {
+		pr_err("failed to create udc class --> %ld\n",
+				PTR_ERR(udc_class));
+		return PTR_ERR(udc_class);
+	}
+
+	udc_class->dev_uevent = usb_udc_uevent;
+	return 0;
+}
+subsys_initcall(usb_udc_init);
+
+static void __exit usb_udc_exit(void)
+{
+	class_destroy(udc_class);
+}
+module_exit(usb_udc_exit);
+
+MODULE_DESCRIPTION("UDC Framework");
+MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c
index dde4445..77d0790 100644
--- a/drivers/usb/gadget/udc/dummy_hcd.c
+++ b/drivers/usb/gadget/udc/dummy_hcd.c
@@ -647,12 +647,10 @@
 static struct usb_request *dummy_alloc_request(struct usb_ep *_ep,
 		gfp_t mem_flags)
 {
-	struct dummy_ep		*ep;
 	struct dummy_request	*req;
 
 	if (!_ep)
 		return NULL;
-	ep = usb_ep_to_dummy_ep(_ep);
 
 	req = kzalloc(sizeof(*req), mem_flags);
 	if (!req)
@@ -2444,9 +2442,6 @@
 
 static void dummy_stop(struct usb_hcd *hcd)
 {
-	struct dummy		*dum;
-
-	dum = hcd_to_dummy_hcd(hcd)->dum;
 	device_remove_file(dummy_dev(hcd_to_dummy_hcd(hcd)), &dev_attr_urbs);
 	dev_info(dummy_dev(hcd_to_dummy_hcd(hcd)), "stopped\n");
 }
diff --git a/drivers/usb/gadget/udc/m66592-udc.c b/drivers/usb/gadget/udc/m66592-udc.c
index b1cfa96..6e977dc 100644
--- a/drivers/usb/gadget/udc/m66592-udc.c
+++ b/drivers/usb/gadget/udc/m66592-udc.c
@@ -1199,8 +1199,6 @@
 	struct m66592 *m66592 = _m66592;
 	u16 intsts0;
 	u16 intenb0;
-	u16 brdysts, nrdysts, bempsts;
-	u16 brdyenb, nrdyenb, bempenb;
 	u16 savepipe;
 	u16 mask0;
 
@@ -1224,12 +1222,10 @@
 
 	mask0 = intsts0 & intenb0;
 	if (mask0) {
-		brdysts = m66592_read(m66592, M66592_BRDYSTS);
-		nrdysts = m66592_read(m66592, M66592_NRDYSTS);
-		bempsts = m66592_read(m66592, M66592_BEMPSTS);
-		brdyenb = m66592_read(m66592, M66592_BRDYENB);
-		nrdyenb = m66592_read(m66592, M66592_NRDYENB);
-		bempenb = m66592_read(m66592, M66592_BEMPENB);
+		u16 brdysts = m66592_read(m66592, M66592_BRDYSTS);
+		u16 bempsts = m66592_read(m66592, M66592_BEMPSTS);
+		u16 brdyenb = m66592_read(m66592, M66592_BRDYENB);
+		u16 bempenb = m66592_read(m66592, M66592_BEMPENB);
 
 		if (mask0 & M66592_VBINT) {
 			m66592_write(m66592,  0xffff & ~M66592_VBINT,
@@ -1408,28 +1404,20 @@
 
 static int m66592_set_halt(struct usb_ep *_ep, int value)
 {
-	struct m66592_ep *ep;
-	struct m66592_request *req;
+	struct m66592_ep *ep = container_of(_ep, struct m66592_ep, ep);
 	unsigned long flags;
 	int ret = 0;
 
-	ep = container_of(_ep, struct m66592_ep, ep);
-	req = list_entry(ep->queue.next, struct m66592_request, queue);
-
 	spin_lock_irqsave(&ep->m66592->lock, flags);
 	if (!list_empty(&ep->queue)) {
 		ret = -EAGAIN;
-		goto out;
-	}
-	if (value) {
+	} else if (value) {
 		ep->busy = 1;
 		pipe_stall(ep->m66592, ep->pipenum);
 	} else {
 		ep->busy = 0;
 		pipe_stop(ep->m66592, ep->pipenum);
 	}
-
-out:
 	spin_unlock_irqrestore(&ep->m66592->lock, flags);
 	return ret;
 }
diff --git a/drivers/usb/gadget/udc/mv_u3d_core.c b/drivers/usb/gadget/udc/mv_u3d_core.c
index dafe74e..b9e19a5 100644
--- a/drivers/usb/gadget/udc/mv_u3d_core.c
+++ b/drivers/usb/gadget/udc/mv_u3d_core.c
@@ -119,18 +119,14 @@
 	struct mv_u3d_req *curr_req)
 {
 	struct mv_u3d_trb	*curr_trb;
-	dma_addr_t cur_deq_lo;
-	struct mv_u3d_ep_context	*curr_ep_context;
-	int trb_complete, actual, remaining_length = 0;
+	int actual, remaining_length = 0;
 	int direction, ep_num;
 	int retval = 0;
 	u32 tmp, status, length;
 
-	curr_ep_context = &u3d->ep_context[index];
 	direction = index % 2;
 	ep_num = index / 2;
 
-	trb_complete = 0;
 	actual = curr_req->req.length;
 
 	while (!list_empty(&curr_req->trb_list)) {
@@ -143,15 +139,10 @@
 		}
 
 		curr_trb->trb_hw->ctrl.own = 0;
-		if (direction == MV_U3D_EP_DIR_OUT) {
+		if (direction == MV_U3D_EP_DIR_OUT)
 			tmp = ioread32(&u3d->vuc_regs->rxst[ep_num].statuslo);
-			cur_deq_lo =
-				ioread32(&u3d->vuc_regs->rxst[ep_num].curdeqlo);
-		} else {
+		else
 			tmp = ioread32(&u3d->vuc_regs->txst[ep_num].statuslo);
-			cur_deq_lo =
-				ioread32(&u3d->vuc_regs->txst[ep_num].curdeqlo);
-		}
 
 		status = tmp >> MV_U3D_XFERSTATUS_COMPLETE_SHIFT;
 		length = tmp & MV_U3D_XFERSTATUS_TRB_LENGTH_MASK;
@@ -527,7 +518,6 @@
 {
 	struct mv_u3d *u3d;
 	struct mv_u3d_ep *ep;
-	struct mv_u3d_ep_context *ep_context;
 	u16 max = 0;
 	unsigned maxburst = 0;
 	u32 epxcr, direction;
@@ -548,9 +538,6 @@
 		_ep->maxburst = 1;
 	maxburst = _ep->maxburst;
 
-	/* Get the endpoint context address */
-	ep_context = (struct mv_u3d_ep_context *)ep->ep_context;
-
 	/* Set the max burst size */
 	switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
 	case USB_ENDPOINT_XFER_BULK:
@@ -633,7 +620,6 @@
 {
 	struct mv_u3d *u3d;
 	struct mv_u3d_ep *ep;
-	struct mv_u3d_ep_context *ep_context;
 	u32 epxcr, direction;
 	unsigned long flags;
 
@@ -646,9 +632,6 @@
 
 	u3d = ep->u3d;
 
-	/* Get the endpoint context address */
-	ep_context = ep->ep_context;
-
 	direction = mv_u3d_ep_dir(ep);
 
 	/* nuke all pending requests (does flush) */
diff --git a/drivers/usb/gadget/udc/mv_udc_core.c b/drivers/usb/gadget/udc/mv_udc_core.c
index 81b6229..ce73b35 100644
--- a/drivers/usb/gadget/udc/mv_udc_core.c
+++ b/drivers/usb/gadget/udc/mv_udc_core.c
@@ -129,7 +129,7 @@
 {
 	struct mv_dtd	*curr_dtd;
 	struct mv_dqh	*curr_dqh;
-	int td_complete, actual, remaining_length;
+	int actual, remaining_length;
 	int i, direction;
 	int retval = 0;
 	u32 errors;
@@ -139,7 +139,6 @@
 	direction = index % 2;
 
 	curr_dtd = curr_req->head;
-	td_complete = 0;
 	actual = curr_req->req.length;
 
 	for (i = 0; i < curr_req->dtd_count; i++) {
@@ -412,11 +411,8 @@
 	unsigned count;
 	int is_last, is_first = 1;
 	struct mv_dtd *dtd, *last_dtd = NULL;
-	struct mv_udc *udc;
 	dma_addr_t dma;
 
-	udc = req->ep->udc;
-
 	do {
 		dtd = build_dtd(req, &count, &dma, &is_last);
 		if (dtd == NULL)
@@ -567,7 +563,7 @@
 	struct mv_udc *udc;
 	struct mv_ep *ep;
 	struct mv_dqh *dqh;
-	u32 bit_pos, epctrlx, direction;
+	u32 epctrlx, direction;
 	unsigned long flags;
 
 	ep = container_of(_ep, struct mv_ep, ep);
@@ -582,7 +578,6 @@
 	spin_lock_irqsave(&udc->lock, flags);
 
 	direction = ep_dir(ep);
-	bit_pos = 1 << ((direction == EP_DIR_OUT ? 0 : 16) + ep->ep_num);
 
 	/* Reset the max packet length and the interrupt on Setup */
 	dqh->max_packet_length = 0;
diff --git a/drivers/usb/gadget/udc/net2272.c b/drivers/usb/gadget/udc/net2272.c
index 18f5ebd..7c61134 100644
--- a/drivers/usb/gadget/udc/net2272.c
+++ b/drivers/usb/gadget/udc/net2272.c
@@ -329,12 +329,10 @@
 static struct usb_request *
 net2272_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
 {
-	struct net2272_ep *ep;
 	struct net2272_request *req;
 
 	if (!_ep)
 		return NULL;
-	ep = container_of(_ep, struct net2272_ep, ep);
 
 	req = kzalloc(sizeof(*req), gfp_flags);
 	if (!req)
@@ -348,10 +346,8 @@
 static void
 net2272_free_request(struct usb_ep *_ep, struct usb_request *_req)
 {
-	struct net2272_ep *ep;
 	struct net2272_request *req;
 
-	ep = container_of(_ep, struct net2272_ep, ep);
 	if (!_ep || !_req)
 		return;
 
diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c
index c894b94..614ab951 100644
--- a/drivers/usb/gadget/udc/net2280.c
+++ b/drivers/usb/gadget/udc/net2280.c
@@ -211,7 +211,7 @@
 		goto print_err;
 	}
 
-	if (dev->quirks & PLX_SUPERSPEED) {
+	if (dev->quirks & PLX_PCIE) {
 		if ((desc->bEndpointAddress & 0x0f) >= 0x0c) {
 			ret = -EDOM;
 			goto print_err;
@@ -245,7 +245,7 @@
 	/* set type, direction, address; reset fifo counters */
 	writel(BIT(FIFO_FLUSH), &ep->regs->ep_stat);
 
-	if ((dev->quirks & PLX_SUPERSPEED) && dev->enhanced_mode) {
+	if ((dev->quirks & PLX_PCIE) && dev->enhanced_mode) {
 		tmp = readl(&ep->cfg->ep_cfg);
 		/* If USB ep number doesn't match hardware ep number */
 		if ((tmp & 0xf) != usb_endpoint_num(desc)) {
@@ -316,7 +316,7 @@
 			BIT(CLEAR_NAK_OUT_PACKETS_MODE), &ep->regs->ep_rsp);
 	}
 
-	if (dev->quirks & PLX_SUPERSPEED)
+	if (dev->quirks & PLX_PCIE)
 		ep_clear_seqnum(ep);
 	writel(tmp, &ep->cfg->ep_cfg);
 
@@ -527,7 +527,7 @@
 	spin_lock_irqsave(&ep->dev->lock, flags);
 	nuke(ep);
 
-	if (ep->dev->quirks & PLX_SUPERSPEED)
+	if (ep->dev->quirks & PLX_PCIE)
 		ep_reset_338x(ep->dev->regs, ep);
 	else
 		ep_reset_228x(ep->dev->regs, ep);
@@ -862,7 +862,7 @@
 	writel(readl(&dma->dmastat), &dma->dmastat);
 
 	writel(td_dma, &dma->dmadesc);
-	if (ep->dev->quirks & PLX_SUPERSPEED)
+	if (ep->dev->quirks & PLX_PCIE)
 		dmactl |= BIT(DMA_REQUEST_OUTSTANDING);
 	writel(dmactl, &dma->dmactl);
 
@@ -1046,7 +1046,7 @@
 
 	/* kickstart this i/o queue? */
 	if  (list_empty(&ep->queue) && !ep->stopped &&
-		!((dev->quirks & PLX_SUPERSPEED) && ep->dma &&
+		!((dev->quirks & PLX_PCIE) && ep->dma &&
 		  (readl(&ep->regs->ep_rsp) & BIT(CLEAR_ENDPOINT_HALT)))) {
 
 		/* use DMA if the endpoint supports it, else pio */
@@ -1169,7 +1169,7 @@
 			break;
 		} else if (!ep->is_in &&
 			   (req->req.length % ep->ep.maxpacket) &&
-			   !(ep->dev->quirks & PLX_SUPERSPEED)) {
+			   !(ep->dev->quirks & PLX_PCIE)) {
 
 			tmp = readl(&ep->regs->ep_stat);
 			/* AVOID TROUBLE HERE by not issuing short reads from
@@ -1367,7 +1367,7 @@
 				ep->wedged = 1;
 		} else {
 			clear_halt(ep);
-			if (ep->dev->quirks & PLX_SUPERSPEED &&
+			if (ep->dev->quirks & PLX_PCIE &&
 				!list_empty(&ep->queue) && ep->td_dma)
 					restart_dma(ep);
 			ep->wedged = 0;
@@ -2394,7 +2394,7 @@
 	 */
 	net2280_led_active(dev, 1);
 
-	if ((dev->quirks & PLX_SUPERSPEED) && !dev->bug7734_patched)
+	if ((dev->quirks & PLX_PCIE) && !dev->bug7734_patched)
 		defect7374_enable_data_eps_zero(dev);
 
 	ep0_start(dev);
@@ -3063,7 +3063,7 @@
 		}
 		ep->stopped = 0;
 		dev->protocol_stall = 0;
-		if (!(dev->quirks & PLX_SUPERSPEED)) {
+		if (!(dev->quirks & PLX_PCIE)) {
 			if (ep->dev->quirks & PLX_2280)
 				tmp = BIT(FIFO_OVERFLOW) |
 				    BIT(FIFO_UNDERFLOW);
@@ -3090,7 +3090,7 @@
 		cpu_to_le32s(&u.raw[0]);
 		cpu_to_le32s(&u.raw[1]);
 
-		if ((dev->quirks & PLX_SUPERSPEED) && !dev->bug7734_patched)
+		if ((dev->quirks & PLX_PCIE) && !dev->bug7734_patched)
 			defect7374_workaround(dev, u.r);
 
 		tmp = 0;
@@ -3173,7 +3173,7 @@
 			} else {
 				ep_vdbg(dev, "%s clear halt\n", e->ep.name);
 				clear_halt(e);
-				if ((ep->dev->quirks & PLX_SUPERSPEED) &&
+				if ((ep->dev->quirks & PLX_PCIE) &&
 					!list_empty(&e->queue) && e->td_dma)
 						restart_dma(e);
 			}
@@ -3195,7 +3195,7 @@
 			if (e->ep.name == ep0name)
 				goto do_stall;
 			set_halt(e);
-			if ((dev->quirks & PLX_SUPERSPEED) && e->dma)
+			if ((dev->quirks & PLX_PCIE) && e->dma)
 				abort_dma(e);
 			allow_status(ep);
 			ep_vdbg(dev, "%s set halt\n", ep->ep.name);
@@ -3234,7 +3234,7 @@
 #undef	w_length
 
 next_endpoints:
-	if ((dev->quirks & PLX_SUPERSPEED) && dev->enhanced_mode) {
+	if ((dev->quirks & PLX_PCIE) && dev->enhanced_mode) {
 		u32 mask = (BIT(ENDPOINT_0_INTERRUPT) |
 			USB3380_IRQSTAT0_EP_INTR_MASK_IN |
 			USB3380_IRQSTAT0_EP_INTR_MASK_OUT);
@@ -3399,7 +3399,7 @@
 		writel(tmp, &dma->dmastat);
 
 		/* dma sync*/
-		if (dev->quirks & PLX_SUPERSPEED) {
+		if (dev->quirks & PLX_PCIE) {
 			u32 r_dmacount = readl(&dma->dmacount);
 			if (!ep->is_in &&  (r_dmacount & 0x00FFFFFF) &&
 			    (tmp & BIT(DMA_TRANSACTION_DONE_INTERRUPT)))
@@ -3468,7 +3468,7 @@
 	/* control requests and PIO */
 	handle_stat0_irqs(dev, readl(&dev->regs->irqstat0));
 
-	if (dev->quirks & PLX_SUPERSPEED) {
+	if (dev->quirks & PLX_PCIE) {
 		/* re-enable interrupt to trigger any possible new interrupt */
 		u32 pciirqenb1 = readl(&dev->regs->pciirqenb1);
 		writel(pciirqenb1 & 0x7FFFFFFF, &dev->regs->pciirqenb1);
@@ -3513,7 +3513,7 @@
 	}
 	if (dev->got_irq)
 		free_irq(pdev->irq, dev);
-	if (dev->quirks & PLX_SUPERSPEED)
+	if (dev->quirks & PLX_PCIE)
 		pci_disable_msi(pdev);
 	if (dev->regs)
 		iounmap(dev->regs);
@@ -3593,7 +3593,7 @@
 	dev->dep = (struct net2280_dep_regs __iomem *) (base + 0x0200);
 	dev->epregs = (struct net2280_ep_regs __iomem *) (base + 0x0300);
 
-	if (dev->quirks & PLX_SUPERSPEED) {
+	if (dev->quirks & PLX_PCIE) {
 		u32 fsmvalue;
 		u32 usbstat;
 		dev->usb_ext = (struct usb338x_usb_ext_regs __iomem *)
@@ -3637,7 +3637,7 @@
 		goto done;
 	}
 
-	if (dev->quirks & PLX_SUPERSPEED)
+	if (dev->quirks & PLX_PCIE)
 		if (pci_enable_msi(pdev))
 			ep_err(dev, "Failed to enable MSI mode\n");
 
@@ -3755,10 +3755,19 @@
 	.class =	PCI_CLASS_SERIAL_USB_DEVICE,
 	.class_mask =	~0,
 	.vendor =	PCI_VENDOR_ID_PLX,
+	.device =	0x2380,
+	.subvendor =	PCI_ANY_ID,
+	.subdevice =	PCI_ANY_ID,
+	.driver_data =	PLX_PCIE,
+	 },
+	{
+	.class =	((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
+	.class_mask =	~0,
+	.vendor =	PCI_VENDOR_ID_PLX,
 	.device =	0x3380,
 	.subvendor =	PCI_ANY_ID,
 	.subdevice =	PCI_ANY_ID,
-	.driver_data =	PLX_SUPERSPEED,
+	.driver_data =	PLX_PCIE | PLX_SUPERSPEED,
 	 },
 	{
 	.class =	PCI_CLASS_SERIAL_USB_DEVICE,
@@ -3767,7 +3776,7 @@
 	.device =	0x3382,
 	.subvendor =	PCI_ANY_ID,
 	.subdevice =	PCI_ANY_ID,
-	.driver_data =	PLX_SUPERSPEED,
+	.driver_data =	PLX_PCIE | PLX_SUPERSPEED,
 	 },
 { /* end: all zeroes */ }
 };
diff --git a/drivers/usb/gadget/udc/net2280.h b/drivers/usb/gadget/udc/net2280.h
index 0d32052..2736a95 100644
--- a/drivers/usb/gadget/udc/net2280.h
+++ b/drivers/usb/gadget/udc/net2280.h
@@ -47,6 +47,7 @@
 #define PLX_LEGACY		BIT(0)
 #define PLX_2280		BIT(1)
 #define PLX_SUPERSPEED		BIT(2)
+#define PLX_PCIE		BIT(3)
 
 #define REG_DIAG		0x0
 #define     RETRY_COUNTER                                       16
diff --git a/drivers/usb/gadget/udc/pch_udc.c b/drivers/usb/gadget/udc/pch_udc.c
index ebc51ec..a97da64 100644
--- a/drivers/usb/gadget/udc/pch_udc.c
+++ b/drivers/usb/gadget/udc/pch_udc.c
@@ -1477,11 +1477,11 @@
 		req->dma_mapped = 0;
 	}
 	ep->halted = 1;
-	spin_lock(&dev->lock);
+	spin_unlock(&dev->lock);
 	if (!ep->in)
 		pch_udc_ep_clear_rrdy(ep);
 	usb_gadget_giveback_request(&ep->ep, &req->req);
-	spin_unlock(&dev->lock);
+	spin_lock(&dev->lock);
 	ep->halted = halted;
 }
 
@@ -1984,9 +1984,8 @@
 			if (ep->num == PCH_UDC_EP0)
 				ep->dev->stall = 1;
 			pch_udc_ep_set_stall(ep);
-			pch_udc_enable_ep_interrupts(ep->dev,
-						     PCH_UDC_EPINT(ep->in,
-								   ep->num));
+			pch_udc_enable_ep_interrupts(
+				ep->dev, PCH_UDC_EPINT(ep->in, ep->num));
 		} else {
 			pch_udc_ep_clear_stall(ep);
 		}
@@ -2451,16 +2450,11 @@
  */
 static void pch_udc_postsvc_epinters(struct pch_udc_dev *dev, int ep_num)
 {
-	struct pch_udc_ep	*ep;
-	struct pch_udc_request *req;
-
-	ep = &dev->ep[UDC_EPIN_IDX(ep_num)];
-	if (!list_empty(&ep->queue)) {
-		req = list_entry(ep->queue.next, struct pch_udc_request, queue);
-		pch_udc_enable_ep_interrupts(ep->dev,
-					     PCH_UDC_EPINT(ep->in, ep->num));
-		pch_udc_ep_clear_nak(ep);
-	}
+	struct pch_udc_ep	*ep = &dev->ep[UDC_EPIN_IDX(ep_num)];
+	if (list_empty(&ep->queue))
+		return;
+	pch_udc_enable_ep_interrupts(ep->dev, PCH_UDC_EPINT(ep->in, ep->num));
+	pch_udc_ep_clear_nak(ep);
 }
 
 /**
@@ -2573,9 +2567,9 @@
 		empty_req_queue(ep);
 	}
 	if (dev->driver) {
-		spin_lock(&dev->lock);
-		usb_gadget_udc_reset(&dev->gadget, dev->driver);
 		spin_unlock(&dev->lock);
+		usb_gadget_udc_reset(&dev->gadget, dev->driver);
+		spin_lock(&dev->lock);
 	}
 }
 
@@ -2654,9 +2648,9 @@
 		dev->ep[i].halted = 0;
 	}
 	dev->stall = 0;
-	spin_lock(&dev->lock);
-	dev->driver->setup(&dev->gadget, &dev->setup_data);
 	spin_unlock(&dev->lock);
+	dev->driver->setup(&dev->gadget, &dev->setup_data);
+	spin_lock(&dev->lock);
 }
 
 /**
@@ -2691,9 +2685,9 @@
 	dev->stall = 0;
 
 	/* call gadget zero with setup data received */
-	spin_lock(&dev->lock);
-	dev->driver->setup(&dev->gadget, &dev->setup_data);
 	spin_unlock(&dev->lock);
+	dev->driver->setup(&dev->gadget, &dev->setup_data);
+	spin_lock(&dev->lock);
 }
 
 /**
diff --git a/drivers/usb/gadget/udc/pxa27x_udc.c b/drivers/usb/gadget/udc/pxa27x_udc.c
index 001a3b7..ad140aa 100644
--- a/drivers/usb/gadget/udc/pxa27x_udc.c
+++ b/drivers/usb/gadget/udc/pxa27x_udc.c
@@ -1825,13 +1825,10 @@
  * Disables all udc endpoints (even control endpoint), report disconnect to
  * the gadget user.
  */
-static void stop_activity(struct pxa_udc *udc, struct usb_gadget_driver *driver)
+static void stop_activity(struct pxa_udc *udc)
 {
 	int i;
 
-	/* don't disconnect drivers more than once */
-	if (udc->gadget.speed == USB_SPEED_UNKNOWN)
-		driver = NULL;
 	udc->gadget.speed = USB_SPEED_UNKNOWN;
 
 	for (i = 0; i < NR_USB_ENDPOINTS; i++)
@@ -1848,7 +1845,7 @@
 {
 	struct pxa_udc *udc = to_pxa(g);
 
-	stop_activity(udc, NULL);
+	stop_activity(udc);
 	udc_disable(udc);
 
 	udc->driver = NULL;
@@ -2296,7 +2293,7 @@
 
 	if ((udccr & UDCCR_UDA) == 0) {
 		dev_dbg(udc->dev, "USB reset start\n");
-		stop_activity(udc, udc->driver);
+		stop_activity(udc);
 	}
 	udc->gadget.speed = USB_SPEED_FULL;
 	memset(&udc->stats, 0, sizeof udc->stats);
diff --git a/drivers/usb/gadget/udc/r8a66597-udc.c b/drivers/usb/gadget/udc/r8a66597-udc.c
index 8b300e6..f2c8862 100644
--- a/drivers/usb/gadget/udc/r8a66597-udc.c
+++ b/drivers/usb/gadget/udc/r8a66597-udc.c
@@ -1464,8 +1464,6 @@
 	struct r8a66597 *r8a66597 = _r8a66597;
 	u16 intsts0;
 	u16 intenb0;
-	u16 brdysts, nrdysts, bempsts;
-	u16 brdyenb, nrdyenb, bempenb;
 	u16 savepipe;
 	u16 mask0;
 
@@ -1481,12 +1479,10 @@
 
 	mask0 = intsts0 & intenb0;
 	if (mask0) {
-		brdysts = r8a66597_read(r8a66597, BRDYSTS);
-		nrdysts = r8a66597_read(r8a66597, NRDYSTS);
-		bempsts = r8a66597_read(r8a66597, BEMPSTS);
-		brdyenb = r8a66597_read(r8a66597, BRDYENB);
-		nrdyenb = r8a66597_read(r8a66597, NRDYENB);
-		bempenb = r8a66597_read(r8a66597, BEMPENB);
+		u16 brdysts = r8a66597_read(r8a66597, BRDYSTS);
+		u16 bempsts = r8a66597_read(r8a66597, BEMPSTS);
+		u16 brdyenb = r8a66597_read(r8a66597, BRDYENB);
+		u16 bempenb = r8a66597_read(r8a66597, BEMPENB);
 
 		if (mask0 & VBINT) {
 			r8a66597_write(r8a66597,  0xffff & ~VBINT,
@@ -1658,20 +1654,14 @@
 
 static int r8a66597_set_halt(struct usb_ep *_ep, int value)
 {
-	struct r8a66597_ep *ep;
-	struct r8a66597_request *req;
+	struct r8a66597_ep *ep = container_of(_ep, struct r8a66597_ep, ep);
 	unsigned long flags;
 	int ret = 0;
 
-	ep = container_of(_ep, struct r8a66597_ep, ep);
-	req = get_request_from_ep(ep);
-
 	spin_lock_irqsave(&ep->r8a66597->lock, flags);
 	if (!list_empty(&ep->queue)) {
 		ret = -EAGAIN;
-		goto out;
-	}
-	if (value) {
+	} else if (value) {
 		ep->busy = 1;
 		pipe_stall(ep->r8a66597, ep->pipenum);
 	} else {
@@ -1679,8 +1669,6 @@
 		ep->wedge = 0;
 		pipe_stop(ep->r8a66597, ep->pipenum);
 	}
-
-out:
 	spin_unlock_irqrestore(&ep->r8a66597->lock, flags);
 	return ret;
 }
diff --git a/drivers/usb/gadget/udc/trace.c b/drivers/usb/gadget/udc/trace.c
new file mode 100644
index 0000000..8c551ab
--- /dev/null
+++ b/drivers/usb/gadget/udc/trace.c
@@ -0,0 +1,18 @@
+/**
+ * trace.c - USB Gadget Framework Trace Support
+ *
+ * Copyright (C) 2016 Intel Corporation
+ * Author: Felipe Balbi <felipe.balbi@linux.intel.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2  of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#define CREATE_TRACE_POINTS
+#include "trace.h"
diff --git a/drivers/usb/gadget/udc/trace.h b/drivers/usb/gadget/udc/trace.h
new file mode 100644
index 0000000..da29874
--- /dev/null
+++ b/drivers/usb/gadget/udc/trace.h
@@ -0,0 +1,298 @@
+/**
+ * udc.c - Core UDC Framework
+ *
+ * Copyright (C) 2016 Intel Corporation
+ * Author: Felipe Balbi <felipe.balbi@linux.intel.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2  of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM gadget
+
+#if !defined(__UDC_TRACE_H) || defined(TRACE_HEADER_MULTI_READ)
+#define __UDC_TRACE_H
+
+#include <linux/types.h>
+#include <linux/tracepoint.h>
+#include <asm/byteorder.h>
+#include <linux/usb/gadget.h>
+
+DECLARE_EVENT_CLASS(udc_log_gadget,
+	TP_PROTO(struct usb_gadget *g, int ret),
+	TP_ARGS(g, ret),
+	TP_STRUCT__entry(
+		__field(enum usb_device_speed, speed)
+		__field(enum usb_device_speed, max_speed)
+		__field(enum usb_device_state, state)
+		__field(unsigned, mA)
+		__field(unsigned, sg_supported)
+		__field(unsigned, is_otg)
+		__field(unsigned, is_a_peripheral)
+		__field(unsigned, b_hnp_enable)
+		__field(unsigned, a_hnp_support)
+		__field(unsigned, hnp_polling_support)
+		__field(unsigned, host_request_flag)
+		__field(unsigned, quirk_ep_out_aligned_size)
+		__field(unsigned, quirk_altset_not_supp)
+		__field(unsigned, quirk_stall_not_supp)
+		__field(unsigned, quirk_zlp_not_supp)
+		__field(unsigned, is_selfpowered)
+		__field(unsigned, deactivated)
+		__field(unsigned, connected)
+		__field(int, ret)
+	),
+	TP_fast_assign(
+		__entry->speed = g->speed;
+		__entry->max_speed = g->max_speed;
+		__entry->state = g->state;
+		__entry->mA = g->mA;
+		__entry->sg_supported = g->sg_supported;
+		__entry->is_otg = g->is_otg;
+		__entry->is_a_peripheral = g->is_a_peripheral;
+		__entry->b_hnp_enable = g->b_hnp_enable;
+		__entry->a_hnp_support = g->a_hnp_support;
+		__entry->hnp_polling_support = g->hnp_polling_support;
+		__entry->host_request_flag = g->host_request_flag;
+		__entry->quirk_ep_out_aligned_size = g->quirk_ep_out_aligned_size;
+		__entry->quirk_altset_not_supp = g->quirk_altset_not_supp;
+		__entry->quirk_stall_not_supp = g->quirk_stall_not_supp;
+		__entry->quirk_zlp_not_supp = g->quirk_zlp_not_supp;
+		__entry->is_selfpowered = g->is_selfpowered;
+		__entry->deactivated = g->deactivated;
+		__entry->connected = g->connected;
+		__entry->ret = ret;
+	),
+	TP_printk("speed %d/%d state %d %dmA [%s%s%s%s%s%s%s%s%s%s%s%s%s%s] --> %d",
+		__entry->speed, __entry->max_speed, __entry->state, __entry->mA,
+		__entry->sg_supported ? "sg:" : "",
+		__entry->is_otg ? "OTG:" : "",
+		__entry->is_a_peripheral ? "a_peripheral:" : "",
+		__entry->b_hnp_enable ? "b_hnp:" : "",
+		__entry->a_hnp_support ? "a_hnp:" : "",
+		__entry->hnp_polling_support ? "hnp_poll:" : "",
+		__entry->host_request_flag ? "hostreq:" : "",
+		__entry->quirk_ep_out_aligned_size ? "out_aligned:" : "",
+		__entry->quirk_altset_not_supp ? "no_altset:" : "",
+		__entry->quirk_stall_not_supp ? "no_stall:" : "",
+		__entry->quirk_zlp_not_supp ? "no_zlp" : "",
+		__entry->is_selfpowered ? "self-powered:" : "bus-powered:",
+		__entry->deactivated ? "deactivated:" : "activated:",
+		__entry->connected ? "connected" : "disconnected",
+		__entry->ret)
+);
+
+DEFINE_EVENT(udc_log_gadget, usb_gadget_frame_number,
+	TP_PROTO(struct usb_gadget *g, int ret),
+	TP_ARGS(g, ret)
+);
+
+DEFINE_EVENT(udc_log_gadget, usb_gadget_wakeup,
+	TP_PROTO(struct usb_gadget *g, int ret),
+	TP_ARGS(g, ret)
+);
+
+DEFINE_EVENT(udc_log_gadget, usb_gadget_set_selfpowered,
+	TP_PROTO(struct usb_gadget *g, int ret),
+	TP_ARGS(g, ret)
+);
+
+DEFINE_EVENT(udc_log_gadget, usb_gadget_clear_selfpowered,
+	TP_PROTO(struct usb_gadget *g, int ret),
+	TP_ARGS(g, ret)
+);
+
+DEFINE_EVENT(udc_log_gadget, usb_gadget_vbus_connect,
+	TP_PROTO(struct usb_gadget *g, int ret),
+	TP_ARGS(g, ret)
+);
+
+DEFINE_EVENT(udc_log_gadget, usb_gadget_vbus_draw,
+	TP_PROTO(struct usb_gadget *g, int ret),
+	TP_ARGS(g, ret)
+);
+
+DEFINE_EVENT(udc_log_gadget, usb_gadget_vbus_disconnect,
+	TP_PROTO(struct usb_gadget *g, int ret),
+	TP_ARGS(g, ret)
+);
+
+DEFINE_EVENT(udc_log_gadget, usb_gadget_connect,
+	TP_PROTO(struct usb_gadget *g, int ret),
+	TP_ARGS(g, ret)
+);
+
+DEFINE_EVENT(udc_log_gadget, usb_gadget_disconnect,
+	TP_PROTO(struct usb_gadget *g, int ret),
+	TP_ARGS(g, ret)
+);
+
+DEFINE_EVENT(udc_log_gadget, usb_gadget_deactivate,
+	TP_PROTO(struct usb_gadget *g, int ret),
+	TP_ARGS(g, ret)
+);
+
+DEFINE_EVENT(udc_log_gadget, usb_gadget_activate,
+	TP_PROTO(struct usb_gadget *g, int ret),
+	TP_ARGS(g, ret)
+);
+
+DECLARE_EVENT_CLASS(udc_log_ep,
+	TP_PROTO(struct usb_ep *ep, int ret),
+	TP_ARGS(ep, ret),
+	TP_STRUCT__entry(
+		__dynamic_array(char, name, UDC_TRACE_STR_MAX)
+		__field(unsigned, maxpacket)
+		__field(unsigned, maxpacket_limit)
+		__field(unsigned, max_streams)
+		__field(unsigned, mult)
+		__field(unsigned, maxburst)
+		__field(u8, address)
+		__field(bool, claimed)
+		__field(bool, enabled)
+		__field(int, ret)
+	),
+	TP_fast_assign(
+		snprintf(__get_str(name), UDC_TRACE_STR_MAX, "%s", ep->name);
+		__entry->maxpacket = ep->maxpacket;
+		__entry->maxpacket_limit = ep->maxpacket_limit;
+		__entry->max_streams = ep->max_streams;
+		__entry->mult = ep->mult;
+		__entry->maxburst = ep->maxburst;
+		__entry->address = ep->address,
+		__entry->claimed = ep->claimed;
+		__entry->enabled = ep->enabled;
+		__entry->ret = ret;
+	),
+	TP_printk("%s: mps %d/%d streams %d mult %d burst %d addr %02x %s%s --> %d",
+		__get_str(name), __entry->maxpacket, __entry->maxpacket_limit,
+		__entry->max_streams, __entry->mult, __entry->maxburst,
+		__entry->address, __entry->claimed ? "claimed:" : "released:",
+		__entry->enabled ? "enabled" : "disabled", ret)
+);
+
+DEFINE_EVENT(udc_log_ep, usb_ep_set_maxpacket_limit,
+	TP_PROTO(struct usb_ep *ep, int ret),
+	TP_ARGS(ep, ret)
+);
+
+DEFINE_EVENT(udc_log_ep, usb_ep_enable,
+	TP_PROTO(struct usb_ep *ep, int ret),
+	TP_ARGS(ep, ret)
+);
+
+DEFINE_EVENT(udc_log_ep, usb_ep_disable,
+	TP_PROTO(struct usb_ep *ep, int ret),
+	TP_ARGS(ep, ret)
+);
+
+DEFINE_EVENT(udc_log_ep, usb_ep_set_halt,
+	TP_PROTO(struct usb_ep *ep, int ret),
+	TP_ARGS(ep, ret)
+);
+
+DEFINE_EVENT(udc_log_ep, usb_ep_clear_halt,
+	TP_PROTO(struct usb_ep *ep, int ret),
+	TP_ARGS(ep, ret)
+);
+
+DEFINE_EVENT(udc_log_ep, usb_ep_set_wedge,
+	TP_PROTO(struct usb_ep *ep, int ret),
+	TP_ARGS(ep, ret)
+);
+
+DEFINE_EVENT(udc_log_ep, usb_ep_fifo_status,
+	TP_PROTO(struct usb_ep *ep, int ret),
+	TP_ARGS(ep, ret)
+);
+
+DEFINE_EVENT(udc_log_ep, usb_ep_fifo_flush,
+	TP_PROTO(struct usb_ep *ep, int ret),
+	TP_ARGS(ep, ret)
+);
+
+DECLARE_EVENT_CLASS(udc_log_req,
+	TP_PROTO(struct usb_ep *ep, struct usb_request *req, int ret),
+	TP_ARGS(ep, req, ret),
+	TP_STRUCT__entry(
+		__dynamic_array(char, name, UDC_TRACE_STR_MAX)
+		__field(unsigned, length)
+		__field(unsigned, actual)
+		__field(unsigned, num_sgs)
+		__field(unsigned, num_mapped_sgs)
+		__field(unsigned, stream_id)
+		__field(unsigned, no_interrupt)
+		__field(unsigned, zero)
+		__field(unsigned, short_not_ok)
+		__field(int, status)
+		__field(int, ret)
+	),
+	TP_fast_assign(
+		snprintf(__get_str(name), UDC_TRACE_STR_MAX, "%s", ep->name);
+		__entry->length = req->length;
+		__entry->actual = req->actual;
+		__entry->num_sgs = req->num_sgs;
+		__entry->num_mapped_sgs = req->num_mapped_sgs;
+		__entry->stream_id = req->stream_id;
+		__entry->no_interrupt = req->no_interrupt;
+		__entry->zero = req->zero;
+		__entry->short_not_ok = req->short_not_ok;
+		__entry->status = req->status;
+		__entry->ret = ret;
+	),
+	TP_printk("%s: length %d/%d sgs %d/%d stream %d %s%s%s status %d --> %d",
+		__get_str(name), __entry->actual, __entry->length,
+		__entry->num_mapped_sgs, __entry->num_sgs, __entry->stream_id,
+		__entry->zero ? "Z" : "z",
+		__entry->short_not_ok ? "S" : "s",
+		__entry->no_interrupt ? "i" : "I",
+		__entry->status, __entry->ret
+	)
+);
+
+DEFINE_EVENT(udc_log_req, usb_ep_alloc_request,
+	TP_PROTO(struct usb_ep *ep, struct usb_request *req, int ret),
+	TP_ARGS(ep, req, ret)
+);
+
+DEFINE_EVENT(udc_log_req, usb_ep_free_request,
+	TP_PROTO(struct usb_ep *ep, struct usb_request *req, int ret),
+	TP_ARGS(ep, req, ret)
+);
+
+DEFINE_EVENT(udc_log_req, usb_ep_queue,
+	TP_PROTO(struct usb_ep *ep, struct usb_request *req, int ret),
+	TP_ARGS(ep, req, ret)
+);
+
+DEFINE_EVENT(udc_log_req, usb_ep_dequeue,
+	TP_PROTO(struct usb_ep *ep, struct usb_request *req, int ret),
+	TP_ARGS(ep, req, ret)
+);
+
+DEFINE_EVENT(udc_log_req, usb_gadget_giveback_request,
+	TP_PROTO(struct usb_ep *ep, struct usb_request *req, int ret),
+	TP_ARGS(ep, req, ret)
+);
+
+#endif /* __UDC_TRACE_H */
+
+/* this part has to be here */
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE trace
+
+#include <trace/define_trace.h>
diff --git a/drivers/usb/gadget/udc/udc-core.c b/drivers/usb/gadget/udc/udc-core.c
deleted file mode 100644
index e1b2dce..0000000
--- a/drivers/usb/gadget/udc/udc-core.c
+++ /dev/null
@@ -1,800 +0,0 @@
-/**
- * udc.c - Core UDC Framework
- *
- * Copyright (C) 2010 Texas Instruments
- * Author: Felipe Balbi <balbi@ti.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2  of
- * the License as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/err.h>
-#include <linux/dma-mapping.h>
-#include <linux/workqueue.h>
-
-#include <linux/usb/ch9.h>
-#include <linux/usb/gadget.h>
-#include <linux/usb.h>
-
-/**
- * struct usb_udc - describes one usb device controller
- * @driver - the gadget driver pointer. For use by the class code
- * @dev - the child device to the actual controller
- * @gadget - the gadget. For use by the class code
- * @list - for use by the udc class driver
- * @vbus - for udcs who care about vbus status, this value is real vbus status;
- * for udcs who do not care about vbus status, this value is always true
- *
- * This represents the internal data structure which is used by the UDC-class
- * to hold information about udc driver and gadget together.
- */
-struct usb_udc {
-	struct usb_gadget_driver	*driver;
-	struct usb_gadget		*gadget;
-	struct device			dev;
-	struct list_head		list;
-	bool				vbus;
-};
-
-static struct class *udc_class;
-static LIST_HEAD(udc_list);
-static LIST_HEAD(gadget_driver_pending_list);
-static DEFINE_MUTEX(udc_lock);
-
-static int udc_bind_to_driver(struct usb_udc *udc,
-		struct usb_gadget_driver *driver);
-
-/* ------------------------------------------------------------------------- */
-
-#ifdef	CONFIG_HAS_DMA
-
-int usb_gadget_map_request_by_dev(struct device *dev,
-		struct usb_request *req, int is_in)
-{
-	if (req->length == 0)
-		return 0;
-
-	if (req->num_sgs) {
-		int     mapped;
-
-		mapped = dma_map_sg(dev, req->sg, req->num_sgs,
-				is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-		if (mapped == 0) {
-			dev_err(dev, "failed to map SGs\n");
-			return -EFAULT;
-		}
-
-		req->num_mapped_sgs = mapped;
-	} else {
-		req->dma = dma_map_single(dev, req->buf, req->length,
-				is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-
-		if (dma_mapping_error(dev, req->dma)) {
-			dev_err(dev, "failed to map buffer\n");
-			return -EFAULT;
-		}
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(usb_gadget_map_request_by_dev);
-
-int usb_gadget_map_request(struct usb_gadget *gadget,
-		struct usb_request *req, int is_in)
-{
-	return usb_gadget_map_request_by_dev(gadget->dev.parent, req, is_in);
-}
-EXPORT_SYMBOL_GPL(usb_gadget_map_request);
-
-void usb_gadget_unmap_request_by_dev(struct device *dev,
-		struct usb_request *req, int is_in)
-{
-	if (req->length == 0)
-		return;
-
-	if (req->num_mapped_sgs) {
-		dma_unmap_sg(dev, req->sg, req->num_mapped_sgs,
-				is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-
-		req->num_mapped_sgs = 0;
-	} else {
-		dma_unmap_single(dev, req->dma, req->length,
-				is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-	}
-}
-EXPORT_SYMBOL_GPL(usb_gadget_unmap_request_by_dev);
-
-void usb_gadget_unmap_request(struct usb_gadget *gadget,
-		struct usb_request *req, int is_in)
-{
-	usb_gadget_unmap_request_by_dev(gadget->dev.parent, req, is_in);
-}
-EXPORT_SYMBOL_GPL(usb_gadget_unmap_request);
-
-#endif	/* CONFIG_HAS_DMA */
-
-/* ------------------------------------------------------------------------- */
-
-/**
- * usb_gadget_giveback_request - give the request back to the gadget layer
- * Context: in_interrupt()
- *
- * This is called by device controller drivers in order to return the
- * completed request back to the gadget layer.
- */
-void usb_gadget_giveback_request(struct usb_ep *ep,
-		struct usb_request *req)
-{
-	if (likely(req->status == 0))
-		usb_led_activity(USB_LED_EVENT_GADGET);
-
-	req->complete(ep, req);
-}
-EXPORT_SYMBOL_GPL(usb_gadget_giveback_request);
-
-/* ------------------------------------------------------------------------- */
-
-/**
- * gadget_find_ep_by_name - returns ep whose name is the same as sting passed
- *	in second parameter or NULL if searched endpoint not found
- * @g: controller to check for quirk
- * @name: name of searched endpoint
- */
-struct usb_ep *gadget_find_ep_by_name(struct usb_gadget *g, const char *name)
-{
-	struct usb_ep *ep;
-
-	gadget_for_each_ep(ep, g) {
-		if (!strcmp(ep->name, name))
-			return ep;
-	}
-
-	return NULL;
-}
-EXPORT_SYMBOL_GPL(gadget_find_ep_by_name);
-
-/* ------------------------------------------------------------------------- */
-
-int usb_gadget_ep_match_desc(struct usb_gadget *gadget,
-		struct usb_ep *ep, struct usb_endpoint_descriptor *desc,
-		struct usb_ss_ep_comp_descriptor *ep_comp)
-{
-	u8		type;
-	u16		max;
-	int		num_req_streams = 0;
-
-	/* endpoint already claimed? */
-	if (ep->claimed)
-		return 0;
-
-	type = usb_endpoint_type(desc);
-	max = 0x7ff & usb_endpoint_maxp(desc);
-
-	if (usb_endpoint_dir_in(desc) && !ep->caps.dir_in)
-		return 0;
-	if (usb_endpoint_dir_out(desc) && !ep->caps.dir_out)
-		return 0;
-
-	if (max > ep->maxpacket_limit)
-		return 0;
-
-	/* "high bandwidth" works only at high speed */
-	if (!gadget_is_dualspeed(gadget) && usb_endpoint_maxp(desc) & (3<<11))
-		return 0;
-
-	switch (type) {
-	case USB_ENDPOINT_XFER_CONTROL:
-		/* only support ep0 for portable CONTROL traffic */
-		return 0;
-	case USB_ENDPOINT_XFER_ISOC:
-		if (!ep->caps.type_iso)
-			return 0;
-		/* ISO:  limit 1023 bytes full speed, 1024 high/super speed */
-		if (!gadget_is_dualspeed(gadget) && max > 1023)
-			return 0;
-		break;
-	case USB_ENDPOINT_XFER_BULK:
-		if (!ep->caps.type_bulk)
-			return 0;
-		if (ep_comp && gadget_is_superspeed(gadget)) {
-			/* Get the number of required streams from the
-			 * EP companion descriptor and see if the EP
-			 * matches it
-			 */
-			num_req_streams = ep_comp->bmAttributes & 0x1f;
-			if (num_req_streams > ep->max_streams)
-				return 0;
-		}
-		break;
-	case USB_ENDPOINT_XFER_INT:
-		/* Bulk endpoints handle interrupt transfers,
-		 * except the toggle-quirky iso-synch kind
-		 */
-		if (!ep->caps.type_int && !ep->caps.type_bulk)
-			return 0;
-		/* INT:  limit 64 bytes full speed, 1024 high/super speed */
-		if (!gadget_is_dualspeed(gadget) && max > 64)
-			return 0;
-		break;
-	}
-
-	return 1;
-}
-EXPORT_SYMBOL_GPL(usb_gadget_ep_match_desc);
-
-/* ------------------------------------------------------------------------- */
-
-static void usb_gadget_state_work(struct work_struct *work)
-{
-	struct usb_gadget *gadget = work_to_gadget(work);
-	struct usb_udc *udc = gadget->udc;
-
-	if (udc)
-		sysfs_notify(&udc->dev.kobj, NULL, "state");
-}
-
-void usb_gadget_set_state(struct usb_gadget *gadget,
-		enum usb_device_state state)
-{
-	gadget->state = state;
-	schedule_work(&gadget->work);
-}
-EXPORT_SYMBOL_GPL(usb_gadget_set_state);
-
-/* ------------------------------------------------------------------------- */
-
-static void usb_udc_connect_control(struct usb_udc *udc)
-{
-	if (udc->vbus)
-		usb_gadget_connect(udc->gadget);
-	else
-		usb_gadget_disconnect(udc->gadget);
-}
-
-/**
- * usb_udc_vbus_handler - updates the udc core vbus status, and try to
- * connect or disconnect gadget
- * @gadget: The gadget which vbus change occurs
- * @status: The vbus status
- *
- * The udc driver calls it when it wants to connect or disconnect gadget
- * according to vbus status.
- */
-void usb_udc_vbus_handler(struct usb_gadget *gadget, bool status)
-{
-	struct usb_udc *udc = gadget->udc;
-
-	if (udc) {
-		udc->vbus = status;
-		usb_udc_connect_control(udc);
-	}
-}
-EXPORT_SYMBOL_GPL(usb_udc_vbus_handler);
-
-/**
- * usb_gadget_udc_reset - notifies the udc core that bus reset occurs
- * @gadget: The gadget which bus reset occurs
- * @driver: The gadget driver we want to notify
- *
- * If the udc driver has bus reset handler, it needs to call this when the bus
- * reset occurs, it notifies the gadget driver that the bus reset occurs as
- * well as updates gadget state.
- */
-void usb_gadget_udc_reset(struct usb_gadget *gadget,
-		struct usb_gadget_driver *driver)
-{
-	driver->reset(gadget);
-	usb_gadget_set_state(gadget, USB_STATE_DEFAULT);
-}
-EXPORT_SYMBOL_GPL(usb_gadget_udc_reset);
-
-/**
- * usb_gadget_udc_start - tells usb device controller to start up
- * @udc: The UDC to be started
- *
- * This call is issued by the UDC Class driver when it's about
- * to register a gadget driver to the device controller, before
- * calling gadget driver's bind() method.
- *
- * It allows the controller to be powered off until strictly
- * necessary to have it powered on.
- *
- * Returns zero on success, else negative errno.
- */
-static inline int usb_gadget_udc_start(struct usb_udc *udc)
-{
-	return udc->gadget->ops->udc_start(udc->gadget, udc->driver);
-}
-
-/**
- * usb_gadget_udc_stop - tells usb device controller we don't need it anymore
- * @gadget: The device we want to stop activity
- * @driver: The driver to unbind from @gadget
- *
- * This call is issued by the UDC Class driver after calling
- * gadget driver's unbind() method.
- *
- * The details are implementation specific, but it can go as
- * far as powering off UDC completely and disable its data
- * line pullups.
- */
-static inline void usb_gadget_udc_stop(struct usb_udc *udc)
-{
-	udc->gadget->ops->udc_stop(udc->gadget);
-}
-
-/**
- * usb_udc_release - release the usb_udc struct
- * @dev: the dev member within usb_udc
- *
- * This is called by driver's core in order to free memory once the last
- * reference is released.
- */
-static void usb_udc_release(struct device *dev)
-{
-	struct usb_udc *udc;
-
-	udc = container_of(dev, struct usb_udc, dev);
-	dev_dbg(dev, "releasing '%s'\n", dev_name(dev));
-	kfree(udc);
-}
-
-static const struct attribute_group *usb_udc_attr_groups[];
-
-static void usb_udc_nop_release(struct device *dev)
-{
-	dev_vdbg(dev, "%s\n", __func__);
-}
-
-/**
- * usb_add_gadget_udc_release - adds a new gadget to the udc class driver list
- * @parent: the parent device to this udc. Usually the controller driver's
- * device.
- * @gadget: the gadget to be added to the list.
- * @release: a gadget release function.
- *
- * Returns zero on success, negative errno otherwise.
- */
-int usb_add_gadget_udc_release(struct device *parent, struct usb_gadget *gadget,
-		void (*release)(struct device *dev))
-{
-	struct usb_udc		*udc;
-	struct usb_gadget_driver *driver;
-	int			ret = -ENOMEM;
-
-	udc = kzalloc(sizeof(*udc), GFP_KERNEL);
-	if (!udc)
-		goto err1;
-
-	dev_set_name(&gadget->dev, "gadget");
-	INIT_WORK(&gadget->work, usb_gadget_state_work);
-	gadget->dev.parent = parent;
-
-	if (release)
-		gadget->dev.release = release;
-	else
-		gadget->dev.release = usb_udc_nop_release;
-
-	ret = device_register(&gadget->dev);
-	if (ret)
-		goto err2;
-
-	device_initialize(&udc->dev);
-	udc->dev.release = usb_udc_release;
-	udc->dev.class = udc_class;
-	udc->dev.groups = usb_udc_attr_groups;
-	udc->dev.parent = parent;
-	ret = dev_set_name(&udc->dev, "%s", kobject_name(&parent->kobj));
-	if (ret)
-		goto err3;
-
-	udc->gadget = gadget;
-	gadget->udc = udc;
-
-	mutex_lock(&udc_lock);
-	list_add_tail(&udc->list, &udc_list);
-
-	ret = device_add(&udc->dev);
-	if (ret)
-		goto err4;
-
-	usb_gadget_set_state(gadget, USB_STATE_NOTATTACHED);
-	udc->vbus = true;
-
-	/* pick up one of pending gadget drivers */
-	list_for_each_entry(driver, &gadget_driver_pending_list, pending) {
-		if (!driver->udc_name || strcmp(driver->udc_name,
-						dev_name(&udc->dev)) == 0) {
-			ret = udc_bind_to_driver(udc, driver);
-			if (ret != -EPROBE_DEFER)
-				list_del(&driver->pending);
-			if (ret)
-				goto err4;
-			break;
-		}
-	}
-
-	mutex_unlock(&udc_lock);
-
-	return 0;
-
-err4:
-	list_del(&udc->list);
-	mutex_unlock(&udc_lock);
-
-err3:
-	put_device(&udc->dev);
-	device_del(&gadget->dev);
-
-err2:
-	put_device(&gadget->dev);
-	kfree(udc);
-
-err1:
-	return ret;
-}
-EXPORT_SYMBOL_GPL(usb_add_gadget_udc_release);
-
-/**
- * usb_get_gadget_udc_name - get the name of the first UDC controller
- * This functions returns the name of the first UDC controller in the system.
- * Please note that this interface is usefull only for legacy drivers which
- * assume that there is only one UDC controller in the system and they need to
- * get its name before initialization. There is no guarantee that the UDC
- * of the returned name will be still available, when gadget driver registers
- * itself.
- *
- * Returns pointer to string with UDC controller name on success, NULL
- * otherwise. Caller should kfree() returned string.
- */
-char *usb_get_gadget_udc_name(void)
-{
-	struct usb_udc *udc;
-	char *name = NULL;
-
-	/* For now we take the first available UDC */
-	mutex_lock(&udc_lock);
-	list_for_each_entry(udc, &udc_list, list) {
-		if (!udc->driver) {
-			name = kstrdup(udc->gadget->name, GFP_KERNEL);
-			break;
-		}
-	}
-	mutex_unlock(&udc_lock);
-	return name;
-}
-EXPORT_SYMBOL_GPL(usb_get_gadget_udc_name);
-
-/**
- * usb_add_gadget_udc - adds a new gadget to the udc class driver list
- * @parent: the parent device to this udc. Usually the controller
- * driver's device.
- * @gadget: the gadget to be added to the list
- *
- * Returns zero on success, negative errno otherwise.
- */
-int usb_add_gadget_udc(struct device *parent, struct usb_gadget *gadget)
-{
-	return usb_add_gadget_udc_release(parent, gadget, NULL);
-}
-EXPORT_SYMBOL_GPL(usb_add_gadget_udc);
-
-static void usb_gadget_remove_driver(struct usb_udc *udc)
-{
-	dev_dbg(&udc->dev, "unregistering UDC driver [%s]\n",
-			udc->driver->function);
-
-	kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE);
-
-	usb_gadget_disconnect(udc->gadget);
-	udc->driver->disconnect(udc->gadget);
-	udc->driver->unbind(udc->gadget);
-	usb_gadget_udc_stop(udc);
-
-	udc->driver = NULL;
-	udc->dev.driver = NULL;
-	udc->gadget->dev.driver = NULL;
-}
-
-/**
- * usb_del_gadget_udc - deletes @udc from udc_list
- * @gadget: the gadget to be removed.
- *
- * This, will call usb_gadget_unregister_driver() if
- * the @udc is still busy.
- */
-void usb_del_gadget_udc(struct usb_gadget *gadget)
-{
-	struct usb_udc *udc = gadget->udc;
-
-	if (!udc)
-		return;
-
-	dev_vdbg(gadget->dev.parent, "unregistering gadget\n");
-
-	mutex_lock(&udc_lock);
-	list_del(&udc->list);
-
-	if (udc->driver) {
-		struct usb_gadget_driver *driver = udc->driver;
-
-		usb_gadget_remove_driver(udc);
-		list_add(&driver->pending, &gadget_driver_pending_list);
-	}
-	mutex_unlock(&udc_lock);
-
-	kobject_uevent(&udc->dev.kobj, KOBJ_REMOVE);
-	flush_work(&gadget->work);
-	device_unregister(&udc->dev);
-	device_unregister(&gadget->dev);
-}
-EXPORT_SYMBOL_GPL(usb_del_gadget_udc);
-
-/* ------------------------------------------------------------------------- */
-
-static int udc_bind_to_driver(struct usb_udc *udc, struct usb_gadget_driver *driver)
-{
-	int ret;
-
-	dev_dbg(&udc->dev, "registering UDC driver [%s]\n",
-			driver->function);
-
-	udc->driver = driver;
-	udc->dev.driver = &driver->driver;
-	udc->gadget->dev.driver = &driver->driver;
-
-	ret = driver->bind(udc->gadget, driver);
-	if (ret)
-		goto err1;
-	ret = usb_gadget_udc_start(udc);
-	if (ret) {
-		driver->unbind(udc->gadget);
-		goto err1;
-	}
-	usb_udc_connect_control(udc);
-
-	kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE);
-	return 0;
-err1:
-	if (ret != -EISNAM)
-		dev_err(&udc->dev, "failed to start %s: %d\n",
-			udc->driver->function, ret);
-	udc->driver = NULL;
-	udc->dev.driver = NULL;
-	udc->gadget->dev.driver = NULL;
-	return ret;
-}
-
-int usb_gadget_probe_driver(struct usb_gadget_driver *driver)
-{
-	struct usb_udc		*udc = NULL;
-	int			ret = -ENODEV;
-
-	if (!driver || !driver->bind || !driver->setup)
-		return -EINVAL;
-
-	mutex_lock(&udc_lock);
-	if (driver->udc_name) {
-		list_for_each_entry(udc, &udc_list, list) {
-			ret = strcmp(driver->udc_name, dev_name(&udc->dev));
-			if (!ret)
-				break;
-		}
-		if (!ret && !udc->driver)
-			goto found;
-	} else {
-		list_for_each_entry(udc, &udc_list, list) {
-			/* For now we take the first one */
-			if (!udc->driver)
-				goto found;
-		}
-	}
-
-	if (!driver->match_existing_only) {
-		list_add_tail(&driver->pending, &gadget_driver_pending_list);
-		pr_info("udc-core: couldn't find an available UDC - added [%s] to list of pending drivers\n",
-			driver->function);
-		ret = 0;
-	}
-
-	mutex_unlock(&udc_lock);
-	return ret;
-found:
-	ret = udc_bind_to_driver(udc, driver);
-	mutex_unlock(&udc_lock);
-	return ret;
-}
-EXPORT_SYMBOL_GPL(usb_gadget_probe_driver);
-
-int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
-{
-	struct usb_udc		*udc = NULL;
-	int			ret = -ENODEV;
-
-	if (!driver || !driver->unbind)
-		return -EINVAL;
-
-	mutex_lock(&udc_lock);
-	list_for_each_entry(udc, &udc_list, list)
-		if (udc->driver == driver) {
-			usb_gadget_remove_driver(udc);
-			usb_gadget_set_state(udc->gadget,
-					USB_STATE_NOTATTACHED);
-			ret = 0;
-			break;
-		}
-
-	if (ret) {
-		list_del(&driver->pending);
-		ret = 0;
-	}
-	mutex_unlock(&udc_lock);
-	return ret;
-}
-EXPORT_SYMBOL_GPL(usb_gadget_unregister_driver);
-
-/* ------------------------------------------------------------------------- */
-
-static ssize_t usb_udc_srp_store(struct device *dev,
-		struct device_attribute *attr, const char *buf, size_t n)
-{
-	struct usb_udc		*udc = container_of(dev, struct usb_udc, dev);
-
-	if (sysfs_streq(buf, "1"))
-		usb_gadget_wakeup(udc->gadget);
-
-	return n;
-}
-static DEVICE_ATTR(srp, S_IWUSR, NULL, usb_udc_srp_store);
-
-static ssize_t usb_udc_softconn_store(struct device *dev,
-		struct device_attribute *attr, const char *buf, size_t n)
-{
-	struct usb_udc		*udc = container_of(dev, struct usb_udc, dev);
-
-	if (!udc->driver) {
-		dev_err(dev, "soft-connect without a gadget driver\n");
-		return -EOPNOTSUPP;
-	}
-
-	if (sysfs_streq(buf, "connect")) {
-		usb_gadget_udc_start(udc);
-		usb_gadget_connect(udc->gadget);
-	} else if (sysfs_streq(buf, "disconnect")) {
-		usb_gadget_disconnect(udc->gadget);
-		udc->driver->disconnect(udc->gadget);
-		usb_gadget_udc_stop(udc);
-	} else {
-		dev_err(dev, "unsupported command '%s'\n", buf);
-		return -EINVAL;
-	}
-
-	return n;
-}
-static DEVICE_ATTR(soft_connect, S_IWUSR, NULL, usb_udc_softconn_store);
-
-static ssize_t state_show(struct device *dev, struct device_attribute *attr,
-			  char *buf)
-{
-	struct usb_udc		*udc = container_of(dev, struct usb_udc, dev);
-	struct usb_gadget	*gadget = udc->gadget;
-
-	return sprintf(buf, "%s\n", usb_state_string(gadget->state));
-}
-static DEVICE_ATTR_RO(state);
-
-#define USB_UDC_SPEED_ATTR(name, param)					\
-ssize_t name##_show(struct device *dev,					\
-		struct device_attribute *attr, char *buf)		\
-{									\
-	struct usb_udc *udc = container_of(dev, struct usb_udc, dev);	\
-	return snprintf(buf, PAGE_SIZE, "%s\n",				\
-			usb_speed_string(udc->gadget->param));		\
-}									\
-static DEVICE_ATTR_RO(name)
-
-static USB_UDC_SPEED_ATTR(current_speed, speed);
-static USB_UDC_SPEED_ATTR(maximum_speed, max_speed);
-
-#define USB_UDC_ATTR(name)					\
-ssize_t name##_show(struct device *dev,				\
-		struct device_attribute *attr, char *buf)	\
-{								\
-	struct usb_udc		*udc = container_of(dev, struct usb_udc, dev); \
-	struct usb_gadget	*gadget = udc->gadget;		\
-								\
-	return snprintf(buf, PAGE_SIZE, "%d\n", gadget->name);	\
-}								\
-static DEVICE_ATTR_RO(name)
-
-static USB_UDC_ATTR(is_otg);
-static USB_UDC_ATTR(is_a_peripheral);
-static USB_UDC_ATTR(b_hnp_enable);
-static USB_UDC_ATTR(a_hnp_support);
-static USB_UDC_ATTR(a_alt_hnp_support);
-static USB_UDC_ATTR(is_selfpowered);
-
-static struct attribute *usb_udc_attrs[] = {
-	&dev_attr_srp.attr,
-	&dev_attr_soft_connect.attr,
-	&dev_attr_state.attr,
-	&dev_attr_current_speed.attr,
-	&dev_attr_maximum_speed.attr,
-
-	&dev_attr_is_otg.attr,
-	&dev_attr_is_a_peripheral.attr,
-	&dev_attr_b_hnp_enable.attr,
-	&dev_attr_a_hnp_support.attr,
-	&dev_attr_a_alt_hnp_support.attr,
-	&dev_attr_is_selfpowered.attr,
-	NULL,
-};
-
-static const struct attribute_group usb_udc_attr_group = {
-	.attrs = usb_udc_attrs,
-};
-
-static const struct attribute_group *usb_udc_attr_groups[] = {
-	&usb_udc_attr_group,
-	NULL,
-};
-
-static int usb_udc_uevent(struct device *dev, struct kobj_uevent_env *env)
-{
-	struct usb_udc		*udc = container_of(dev, struct usb_udc, dev);
-	int			ret;
-
-	ret = add_uevent_var(env, "USB_UDC_NAME=%s", udc->gadget->name);
-	if (ret) {
-		dev_err(dev, "failed to add uevent USB_UDC_NAME\n");
-		return ret;
-	}
-
-	if (udc->driver) {
-		ret = add_uevent_var(env, "USB_UDC_DRIVER=%s",
-				udc->driver->function);
-		if (ret) {
-			dev_err(dev, "failed to add uevent USB_UDC_DRIVER\n");
-			return ret;
-		}
-	}
-
-	return 0;
-}
-
-static int __init usb_udc_init(void)
-{
-	udc_class = class_create(THIS_MODULE, "udc");
-	if (IS_ERR(udc_class)) {
-		pr_err("failed to create udc class --> %ld\n",
-				PTR_ERR(udc_class));
-		return PTR_ERR(udc_class);
-	}
-
-	udc_class->dev_uevent = usb_udc_uevent;
-	return 0;
-}
-subsys_initcall(usb_udc_init);
-
-static void __exit usb_udc_exit(void)
-{
-	class_destroy(udc_class);
-}
-module_exit(usb_udc_exit);
-
-MODULE_DESCRIPTION("UDC Framework");
-MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/gadget/udc/udc-xilinx.c b/drivers/usb/gadget/udc/udc-xilinx.c
index 1cbb0ac..f8bf290 100644
--- a/drivers/usb/gadget/udc/udc-xilinx.c
+++ b/drivers/usb/gadget/udc/udc-xilinx.c
@@ -2055,7 +2055,6 @@
 	struct device_node *np = pdev->dev.of_node;
 	struct resource *res;
 	struct xusb_udc *udc;
-	struct xusb_ep *ep0;
 	int irq;
 	int ret;
 	u32 ier;
@@ -2119,8 +2118,6 @@
 
 	xudc_eps_init(udc);
 
-	ep0 = &udc->ep[0];
-
 	/* Set device address to 0.*/
 	udc->write_fn(udc->addr, XUSB_ADDRESS_OFFSET, 0);
 
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index d8f5674..2e710a4 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -180,7 +180,7 @@
 config USB_EHCI_HCD_OMAP
 	tristate "EHCI support for OMAP3 and later chips"
 	depends on ARCH_OMAP
-	select NOP_USB_XCEIV
+	depends on NOP_USB_XCEIV
 	default y
 	---help---
 	  Enables support for the on-chip EHCI controller on
diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
index 1757ebb..6816b8c 100644
--- a/drivers/usb/host/ehci-platform.c
+++ b/drivers/usb/host/ehci-platform.c
@@ -39,11 +39,12 @@
 
 #define DRIVER_DESC "EHCI generic platform driver"
 #define EHCI_MAX_CLKS 3
+#define EHCI_MAX_RSTS 3
 #define hcd_to_ehci_priv(h) ((struct ehci_platform_priv *)hcd_to_ehci(h)->priv)
 
 struct ehci_platform_priv {
 	struct clk *clks[EHCI_MAX_CLKS];
-	struct reset_control *rst;
+	struct reset_control *rsts[EHCI_MAX_RSTS];
 	struct phy **phys;
 	int num_phys;
 	bool reset_on_resume;
@@ -149,7 +150,7 @@
 	struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev);
 	struct ehci_platform_priv *priv;
 	struct ehci_hcd *ehci;
-	int err, irq, phy_num, clk = 0;
+	int err, irq, phy_num, clk = 0, rst;
 
 	if (usb_disabled())
 		return -ENODEV;
@@ -234,16 +235,20 @@
 		}
 	}
 
-	priv->rst = devm_reset_control_get_optional(&dev->dev, NULL);
-	if (IS_ERR(priv->rst)) {
-		err = PTR_ERR(priv->rst);
-		if (err == -EPROBE_DEFER)
-			goto err_put_clks;
-		priv->rst = NULL;
-	} else {
-		err = reset_control_deassert(priv->rst);
+	for (rst = 0; rst < EHCI_MAX_RSTS; rst++) {
+		priv->rsts[rst] = devm_reset_control_get_shared_by_index(
+					&dev->dev, rst);
+		if (IS_ERR(priv->rsts[rst])) {
+			err = PTR_ERR(priv->rsts[rst]);
+			if (err == -EPROBE_DEFER)
+				goto err_reset;
+			priv->rsts[rst] = NULL;
+			break;
+		}
+
+		err = reset_control_deassert(priv->rsts[rst]);
 		if (err)
-			goto err_put_clks;
+			goto err_reset;
 	}
 
 	if (pdata->big_endian_desc)
@@ -300,8 +305,8 @@
 	if (pdata->power_off)
 		pdata->power_off(dev);
 err_reset:
-	if (priv->rst)
-		reset_control_assert(priv->rst);
+	while (--rst >= 0)
+		reset_control_assert(priv->rsts[rst]);
 err_put_clks:
 	while (--clk >= 0)
 		clk_put(priv->clks[clk]);
@@ -319,15 +324,15 @@
 	struct usb_hcd *hcd = platform_get_drvdata(dev);
 	struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev);
 	struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
-	int clk;
+	int clk, rst;
 
 	usb_remove_hcd(hcd);
 
 	if (pdata->power_off)
 		pdata->power_off(dev);
 
-	if (priv->rst)
-		reset_control_assert(priv->rst);
+	for (rst = 0; rst < EHCI_MAX_RSTS && priv->rsts[rst]; rst++)
+		reset_control_assert(priv->rsts[rst]);
 
 	for (clk = 0; clk < EHCI_MAX_CLKS && priv->clks[clk]; clk++)
 		clk_put(priv->clks[clk]);
diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
index ae1c988..898b740 100644
--- a/drivers/usb/host/ohci-platform.c
+++ b/drivers/usb/host/ohci-platform.c
@@ -33,11 +33,12 @@
 
 #define DRIVER_DESC "OHCI generic platform driver"
 #define OHCI_MAX_CLKS 3
+#define OHCI_MAX_RESETS 2
 #define hcd_to_ohci_priv(h) ((struct ohci_platform_priv *)hcd_to_ohci(h)->priv)
 
 struct ohci_platform_priv {
 	struct clk *clks[OHCI_MAX_CLKS];
-	struct reset_control *rst;
+	struct reset_control *resets[OHCI_MAX_RESETS];
 	struct phy **phys;
 	int num_phys;
 };
@@ -117,7 +118,7 @@
 	struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
 	struct ohci_platform_priv *priv;
 	struct ohci_hcd *ohci;
-	int err, irq, phy_num, clk = 0;
+	int err, irq, phy_num, clk = 0, rst = 0;
 
 	if (usb_disabled())
 		return -ENODEV;
@@ -195,19 +196,21 @@
 				break;
 			}
 		}
-
-	}
-
-	priv->rst = devm_reset_control_get_optional(&dev->dev, NULL);
-	if (IS_ERR(priv->rst)) {
-		err = PTR_ERR(priv->rst);
-		if (err == -EPROBE_DEFER)
-			goto err_put_clks;
-		priv->rst = NULL;
-	} else {
-		err = reset_control_deassert(priv->rst);
-		if (err)
-			goto err_put_clks;
+		for (rst = 0; rst < OHCI_MAX_RESETS; rst++) {
+			priv->resets[rst] =
+				devm_reset_control_get_shared_by_index(
+								&dev->dev, rst);
+			if (IS_ERR(priv->resets[rst])) {
+				err = PTR_ERR(priv->resets[rst]);
+				if (err == -EPROBE_DEFER)
+					goto err_reset;
+				priv->resets[rst] = NULL;
+				break;
+			}
+			err = reset_control_deassert(priv->resets[rst]);
+			if (err)
+				goto err_reset;
+		}
 	}
 
 	if (pdata->big_endian_desc)
@@ -265,8 +268,8 @@
 	if (pdata->power_off)
 		pdata->power_off(dev);
 err_reset:
-	if (priv->rst)
-		reset_control_assert(priv->rst);
+	while (--rst >= 0)
+		reset_control_assert(priv->resets[rst]);
 err_put_clks:
 	while (--clk >= 0)
 		clk_put(priv->clks[clk]);
@@ -284,15 +287,15 @@
 	struct usb_hcd *hcd = platform_get_drvdata(dev);
 	struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
 	struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
-	int clk;
+	int clk, rst;
 
 	usb_remove_hcd(hcd);
 
 	if (pdata->power_off)
 		pdata->power_off(dev);
 
-	if (priv->rst)
-		reset_control_assert(priv->rst);
+	for (rst = 0; rst < OHCI_MAX_RESETS && priv->resets[rst]; rst++)
+		reset_control_assert(priv->resets[rst]);
 
 	for (clk = 0; clk < OHCI_MAX_CLKS && priv->clks[clk]; clk++)
 		clk_put(priv->clks[clk]);
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index bad0d1f..6afe323 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -37,7 +37,9 @@
  * "All components of all Command and Transfer TRBs shall be initialized to '0'"
  */
 static struct xhci_segment *xhci_segment_alloc(struct xhci_hcd *xhci,
-					unsigned int cycle_state, gfp_t flags)
+					       unsigned int cycle_state,
+					       unsigned int max_packet,
+					       gfp_t flags)
 {
 	struct xhci_segment *seg;
 	dma_addr_t	dma;
@@ -53,6 +55,14 @@
 		return NULL;
 	}
 
+	if (max_packet) {
+		seg->bounce_buf = kzalloc(max_packet, flags | GFP_DMA);
+		if (!seg->bounce_buf) {
+			dma_pool_free(xhci->segment_pool, seg->trbs, dma);
+			kfree(seg);
+			return NULL;
+		}
+	}
 	/* If the cycle state is 0, set the cycle bit to 1 for all the TRBs */
 	if (cycle_state == 0) {
 		for (i = 0; i < TRBS_PER_SEGMENT; i++)
@@ -70,6 +80,7 @@
 		dma_pool_free(xhci->segment_pool, seg->trbs, seg->dma);
 		seg->trbs = NULL;
 	}
+	kfree(seg->bounce_buf);
 	kfree(seg);
 }
 
@@ -317,11 +328,11 @@
 static int xhci_alloc_segments_for_ring(struct xhci_hcd *xhci,
 		struct xhci_segment **first, struct xhci_segment **last,
 		unsigned int num_segs, unsigned int cycle_state,
-		enum xhci_ring_type type, gfp_t flags)
+		enum xhci_ring_type type, unsigned int max_packet, gfp_t flags)
 {
 	struct xhci_segment *prev;
 
-	prev = xhci_segment_alloc(xhci, cycle_state, flags);
+	prev = xhci_segment_alloc(xhci, cycle_state, max_packet, flags);
 	if (!prev)
 		return -ENOMEM;
 	num_segs--;
@@ -330,7 +341,7 @@
 	while (num_segs > 0) {
 		struct xhci_segment	*next;
 
-		next = xhci_segment_alloc(xhci, cycle_state, flags);
+		next = xhci_segment_alloc(xhci, cycle_state, max_packet, flags);
 		if (!next) {
 			prev = *first;
 			while (prev) {
@@ -360,7 +371,7 @@
  */
 static struct xhci_ring *xhci_ring_alloc(struct xhci_hcd *xhci,
 		unsigned int num_segs, unsigned int cycle_state,
-		enum xhci_ring_type type, gfp_t flags)
+		enum xhci_ring_type type, unsigned int max_packet, gfp_t flags)
 {
 	struct xhci_ring	*ring;
 	int ret;
@@ -370,13 +381,15 @@
 		return NULL;
 
 	ring->num_segs = num_segs;
+	ring->bounce_buf_len = max_packet;
 	INIT_LIST_HEAD(&ring->td_list);
 	ring->type = type;
 	if (num_segs == 0)
 		return ring;
 
 	ret = xhci_alloc_segments_for_ring(xhci, &ring->first_seg,
-			&ring->last_seg, num_segs, cycle_state, type, flags);
+			&ring->last_seg, num_segs, cycle_state, type,
+			max_packet, flags);
 	if (ret)
 		goto fail;
 
@@ -470,7 +483,8 @@
 			ring->num_segs : num_segs_needed;
 
 	ret = xhci_alloc_segments_for_ring(xhci, &first, &last,
-			num_segs, ring->cycle_state, ring->type, flags);
+			num_segs, ring->cycle_state, ring->type,
+			ring->bounce_buf_len, flags);
 	if (ret)
 		return -ENOMEM;
 
@@ -652,7 +666,8 @@
  */
 struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci,
 		unsigned int num_stream_ctxs,
-		unsigned int num_streams, gfp_t mem_flags)
+		unsigned int num_streams,
+		unsigned int max_packet, gfp_t mem_flags)
 {
 	struct xhci_stream_info *stream_info;
 	u32 cur_stream;
@@ -704,9 +719,11 @@
 	 * and add their segment DMA addresses to the radix tree.
 	 * Stream 0 is reserved.
 	 */
+
 	for (cur_stream = 1; cur_stream < num_streams; cur_stream++) {
 		stream_info->stream_rings[cur_stream] =
-			xhci_ring_alloc(xhci, 2, 1, TYPE_STREAM, mem_flags);
+			xhci_ring_alloc(xhci, 2, 1, TYPE_STREAM, max_packet,
+					mem_flags);
 		cur_ring = stream_info->stream_rings[cur_stream];
 		if (!cur_ring)
 			goto cleanup_rings;
@@ -1003,7 +1020,7 @@
 	}
 
 	/* Allocate endpoint 0 ring */
-	dev->eps[0].ring = xhci_ring_alloc(xhci, 2, 1, TYPE_CTRL, flags);
+	dev->eps[0].ring = xhci_ring_alloc(xhci, 2, 1, TYPE_CTRL, 0, flags);
 	if (!dev->eps[0].ring)
 		goto fail;
 
@@ -1434,22 +1451,6 @@
 		return -EINVAL;
 
 	ring_type = usb_endpoint_type(&ep->desc);
-	/* Set up the endpoint ring */
-	virt_dev->eps[ep_index].new_ring =
-		xhci_ring_alloc(xhci, 2, 1, ring_type, mem_flags);
-	if (!virt_dev->eps[ep_index].new_ring) {
-		/* Attempt to use the ring cache */
-		if (virt_dev->num_rings_cached == 0)
-			return -ENOMEM;
-		virt_dev->num_rings_cached--;
-		virt_dev->eps[ep_index].new_ring =
-			virt_dev->ring_cache[virt_dev->num_rings_cached];
-		virt_dev->ring_cache[virt_dev->num_rings_cached] = NULL;
-		xhci_reinit_cached_ring(xhci, virt_dev->eps[ep_index].new_ring,
-					1, ring_type);
-	}
-	virt_dev->eps[ep_index].skip = false;
-	ep_ring = virt_dev->eps[ep_index].new_ring;
 
 	/*
 	 * Get values to fill the endpoint context, mostly from ep descriptor.
@@ -1479,6 +1480,23 @@
 	if ((xhci->hci_version > 0x100) && HCC2_LEC(xhci->hcc_params2))
 		mult = 0;
 
+	/* Set up the endpoint ring */
+	virt_dev->eps[ep_index].new_ring =
+		xhci_ring_alloc(xhci, 2, 1, ring_type, max_packet, mem_flags);
+	if (!virt_dev->eps[ep_index].new_ring) {
+		/* Attempt to use the ring cache */
+		if (virt_dev->num_rings_cached == 0)
+			return -ENOMEM;
+		virt_dev->num_rings_cached--;
+		virt_dev->eps[ep_index].new_ring =
+			virt_dev->ring_cache[virt_dev->num_rings_cached];
+		virt_dev->ring_cache[virt_dev->num_rings_cached] = NULL;
+		xhci_reinit_cached_ring(xhci, virt_dev->eps[ep_index].new_ring,
+					1, ring_type);
+	}
+	virt_dev->eps[ep_index].skip = false;
+	ep_ring = virt_dev->eps[ep_index].new_ring;
+
 	/* Fill the endpoint context */
 	ep_ctx->ep_info = cpu_to_le32(EP_MAX_ESIT_PAYLOAD_HI(max_esit_payload) |
 				      EP_INTERVAL(interval) |
@@ -2409,7 +2427,7 @@
 		goto fail;
 
 	/* Set up the command ring to have one segments for now. */
-	xhci->cmd_ring = xhci_ring_alloc(xhci, 1, 1, TYPE_COMMAND, flags);
+	xhci->cmd_ring = xhci_ring_alloc(xhci, 1, 1, TYPE_COMMAND, 0, flags);
 	if (!xhci->cmd_ring)
 		goto fail;
 	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
@@ -2454,7 +2472,7 @@
 	 */
 	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Allocating event ring");
 	xhci->event_ring = xhci_ring_alloc(xhci, ERST_NUM_SEGS, 1, TYPE_EVENT,
-						flags);
+					0, flags);
 	if (!xhci->event_ring)
 		goto fail;
 	if (xhci_check_trb_in_td_math(xhci) < 0)
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 1f3f981..ed56bf9 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -18,7 +18,6 @@
 #include <linux/platform_device.h>
 #include <linux/usb/phy.h>
 #include <linux/slab.h>
-#include <linux/usb/xhci_pdriver.h>
 #include <linux/acpi.h>
 
 #include "xhci.h"
@@ -138,8 +137,6 @@
 
 static int xhci_plat_probe(struct platform_device *pdev)
 {
-	struct device_node	*node = pdev->dev.of_node;
-	struct usb_xhci_pdata	*pdata = dev_get_platdata(&pdev->dev);
 	const struct of_device_id *match;
 	const struct hc_driver	*driver;
 	struct xhci_hcd		*xhci;
@@ -202,7 +199,7 @@
 	}
 
 	xhci = hcd_to_xhci(hcd);
-	match = of_match_node(usb_xhci_of_match, node);
+	match = of_match_node(usb_xhci_of_match, pdev->dev.of_node);
 	if (match) {
 		const struct xhci_plat_priv *priv_match = match->data;
 		struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
@@ -223,8 +220,7 @@
 		goto disable_clk;
 	}
 
-	if ((node && of_property_read_bool(node, "usb3-lpm-capable")) ||
-			(pdata && pdata->usb3_lpm_capable))
+	if (device_property_read_bool(&pdev->dev, "usb3-lpm-capable"))
 		xhci->quirks |= XHCI_LPM_SUPPORT;
 
 	if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index d7d5025..918e0c7 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -66,6 +66,7 @@
 
 #include <linux/scatterlist.h>
 #include <linux/slab.h>
+#include <linux/dma-mapping.h>
 #include "xhci.h"
 #include "xhci-trace.h"
 #include "xhci-mtk.h"
@@ -88,36 +89,25 @@
 	return seg->dma + (segment_offset * sizeof(*trb));
 }
 
-/* Does this link TRB point to the first segment in a ring,
- * or was the previous TRB the last TRB on the last segment in the ERST?
- */
-static bool last_trb_on_last_seg(struct xhci_hcd *xhci, struct xhci_ring *ring,
-		struct xhci_segment *seg, union xhci_trb *trb)
+static bool trb_is_link(union xhci_trb *trb)
 {
-	if (ring == xhci->event_ring)
-		return (trb == &seg->trbs[TRBS_PER_SEGMENT]) &&
-			(seg->next == xhci->event_ring->first_seg);
-	else
-		return le32_to_cpu(trb->link.control) & LINK_TOGGLE;
+	return TRB_TYPE_LINK_LE32(trb->link.control);
 }
 
-/* Is this TRB a link TRB or was the last TRB the last TRB in this event ring
- * segment?  I.e. would the updated event TRB pointer step off the end of the
- * event seg?
- */
-static int last_trb(struct xhci_hcd *xhci, struct xhci_ring *ring,
-		struct xhci_segment *seg, union xhci_trb *trb)
+static bool last_trb_on_seg(struct xhci_segment *seg, union xhci_trb *trb)
 {
-	if (ring == xhci->event_ring)
-		return trb == &seg->trbs[TRBS_PER_SEGMENT];
-	else
-		return TRB_TYPE_LINK_LE32(trb->link.control);
+	return trb == &seg->trbs[TRBS_PER_SEGMENT - 1];
 }
 
-static int enqueue_is_link_trb(struct xhci_ring *ring)
+static bool last_trb_on_ring(struct xhci_ring *ring,
+			struct xhci_segment *seg, union xhci_trb *trb)
 {
-	struct xhci_link_trb *link = &ring->enqueue->link;
-	return TRB_TYPE_LINK_LE32(link->control);
+	return last_trb_on_seg(seg, trb) && (seg->next == ring->first_seg);
+}
+
+static bool link_trb_toggles_cycle(union xhci_trb *trb)
+{
+	return le32_to_cpu(trb->link.control) & LINK_TOGGLE;
 }
 
 /* Updates trb to point to the next TRB in the ring, and updates seg if the next
@@ -129,7 +119,7 @@
 		struct xhci_segment **seg,
 		union xhci_trb **trb)
 {
-	if (last_trb(xhci, ring, *seg, *trb)) {
+	if (trb_is_link(*trb)) {
 		*seg = (*seg)->next;
 		*trb = ((*seg)->trbs);
 	} else {
@@ -145,32 +135,29 @@
 {
 	ring->deq_updates++;
 
-	/*
-	 * If this is not event ring, and the dequeue pointer
-	 * is not on a link TRB, there is one more usable TRB
-	 */
-	if (ring->type != TYPE_EVENT &&
-			!last_trb(xhci, ring, ring->deq_seg, ring->dequeue))
-		ring->num_trbs_free++;
-
-	do {
-		/*
-		 * Update the dequeue pointer further if that was a link TRB or
-		 * we're at the end of an event ring segment (which doesn't have
-		 * link TRBS)
-		 */
-		if (last_trb(xhci, ring, ring->deq_seg, ring->dequeue)) {
-			if (ring->type == TYPE_EVENT &&
-					last_trb_on_last_seg(xhci, ring,
-						ring->deq_seg, ring->dequeue)) {
-				ring->cycle_state ^= 1;
-			}
-			ring->deq_seg = ring->deq_seg->next;
-			ring->dequeue = ring->deq_seg->trbs;
-		} else {
+	/* event ring doesn't have link trbs, check for last trb */
+	if (ring->type == TYPE_EVENT) {
+		if (!last_trb_on_seg(ring->deq_seg, ring->dequeue)) {
 			ring->dequeue++;
+			return;
 		}
-	} while (last_trb(xhci, ring, ring->deq_seg, ring->dequeue));
+		if (last_trb_on_ring(ring, ring->deq_seg, ring->dequeue))
+			ring->cycle_state ^= 1;
+		ring->deq_seg = ring->deq_seg->next;
+		ring->dequeue = ring->deq_seg->trbs;
+		return;
+	}
+
+	/* All other rings have link trbs */
+	if (!trb_is_link(ring->dequeue)) {
+		ring->dequeue++;
+		ring->num_trbs_free++;
+	}
+	while (trb_is_link(ring->dequeue)) {
+		ring->deq_seg = ring->deq_seg->next;
+		ring->dequeue = ring->deq_seg->trbs;
+	}
+	return;
 }
 
 /*
@@ -198,50 +185,42 @@
 
 	chain = le32_to_cpu(ring->enqueue->generic.field[3]) & TRB_CHAIN;
 	/* If this is not event ring, there is one less usable TRB */
-	if (ring->type != TYPE_EVENT &&
-			!last_trb(xhci, ring, ring->enq_seg, ring->enqueue))
+	if (!trb_is_link(ring->enqueue))
 		ring->num_trbs_free--;
 	next = ++(ring->enqueue);
 
 	ring->enq_updates++;
-	/* Update the dequeue pointer further if that was a link TRB or we're at
-	 * the end of an event ring segment (which doesn't have link TRBS)
-	 */
-	while (last_trb(xhci, ring, ring->enq_seg, next)) {
-		if (ring->type != TYPE_EVENT) {
-			/*
-			 * If the caller doesn't plan on enqueueing more
-			 * TDs before ringing the doorbell, then we
-			 * don't want to give the link TRB to the
-			 * hardware just yet.  We'll give the link TRB
-			 * back in prepare_ring() just before we enqueue
-			 * the TD at the top of the ring.
-			 */
-			if (!chain && !more_trbs_coming)
-				break;
+	/* Update the dequeue pointer further if that was a link TRB */
+	while (trb_is_link(next)) {
 
-			/* If we're not dealing with 0.95 hardware or
-			 * isoc rings on AMD 0.96 host,
-			 * carry over the chain bit of the previous TRB
-			 * (which may mean the chain bit is cleared).
-			 */
-			if (!(ring->type == TYPE_ISOC &&
-					(xhci->quirks & XHCI_AMD_0x96_HOST))
-						&& !xhci_link_trb_quirk(xhci)) {
-				next->link.control &=
-					cpu_to_le32(~TRB_CHAIN);
-				next->link.control |=
-					cpu_to_le32(chain);
-			}
-			/* Give this link TRB to the hardware */
-			wmb();
-			next->link.control ^= cpu_to_le32(TRB_CYCLE);
+		/*
+		 * If the caller doesn't plan on enqueueing more TDs before
+		 * ringing the doorbell, then we don't want to give the link TRB
+		 * to the hardware just yet. We'll give the link TRB back in
+		 * prepare_ring() just before we enqueue the TD at the top of
+		 * the ring.
+		 */
+		if (!chain && !more_trbs_coming)
+			break;
 
-			/* Toggle the cycle bit after the last ring segment. */
-			if (last_trb_on_last_seg(xhci, ring, ring->enq_seg, next)) {
-				ring->cycle_state ^= 1;
-			}
+		/* If we're not dealing with 0.95 hardware or isoc rings on
+		 * AMD 0.96 host, carry over the chain bit of the previous TRB
+		 * (which may mean the chain bit is cleared).
+		 */
+		if (!(ring->type == TYPE_ISOC &&
+		      (xhci->quirks & XHCI_AMD_0x96_HOST)) &&
+		    !xhci_link_trb_quirk(xhci)) {
+			next->link.control &= cpu_to_le32(~TRB_CHAIN);
+			next->link.control |= cpu_to_le32(chain);
 		}
+		/* Give this link TRB to the hardware */
+		wmb();
+		next->link.control ^= cpu_to_le32(TRB_CYCLE);
+
+		/* Toggle the cycle bit after the last ring segment. */
+		if (link_trb_toggles_cycle(next))
+			ring->cycle_state ^= 1;
+
 		ring->enq_seg = ring->enq_seg->next;
 		ring->enqueue = ring->enq_seg->trbs;
 		next = ring->enqueue;
@@ -626,6 +605,31 @@
 	}
 }
 
+void xhci_unmap_td_bounce_buffer(struct xhci_hcd *xhci, struct xhci_ring *ring,
+				 struct xhci_td *td)
+{
+	struct device *dev = xhci_to_hcd(xhci)->self.controller;
+	struct xhci_segment *seg = td->bounce_seg;
+	struct urb *urb = td->urb;
+
+	if (!seg || !urb)
+		return;
+
+	if (usb_urb_dir_out(urb)) {
+		dma_unmap_single(dev, seg->bounce_dma, ring->bounce_buf_len,
+				 DMA_TO_DEVICE);
+		return;
+	}
+
+	/* for in tranfers we need to copy the data from bounce to sg */
+	sg_pcopy_from_buffer(urb->sg, urb->num_mapped_sgs, seg->bounce_buf,
+			     seg->bounce_len, seg->bounce_offs);
+	dma_unmap_single(dev, seg->bounce_dma, ring->bounce_buf_len,
+			 DMA_FROM_DEVICE);
+	seg->bounce_len = 0;
+	seg->bounce_offs = 0;
+}
+
 /*
  * When we get a command completion for a Stop Endpoint Command, we need to
  * unlink any cancelled TDs from the ring.  There are two ways to do that:
@@ -745,6 +749,9 @@
 		/* Doesn't matter what we pass for status, since the core will
 		 * just overwrite it (because the URB has been unlinked).
 		 */
+		ep_ring = xhci_urb_to_transfer_ring(xhci, cur_td->urb);
+		if (ep_ring && cur_td->bounce_seg)
+			xhci_unmap_td_bounce_buffer(xhci, ep_ring, cur_td);
 		xhci_giveback_urb_in_irq(xhci, cur_td, 0);
 
 		/* Stop processing the cancelled list if the watchdog timer is
@@ -767,6 +774,9 @@
 		list_del_init(&cur_td->td_list);
 		if (!list_empty(&cur_td->cancelled_td_list))
 			list_del_init(&cur_td->cancelled_td_list);
+
+		if (cur_td->bounce_seg)
+			xhci_unmap_td_bounce_buffer(xhci, ring, cur_td);
 		xhci_giveback_urb_in_irq(xhci, cur_td, -ESHUTDOWN);
 	}
 }
@@ -917,7 +927,7 @@
 	 * the dequeue pointer one segment further, or we'll jump off
 	 * the segment into la-la-land.
 	 */
-	if (last_trb(xhci, ep_ring, ep_ring->deq_seg, ep_ring->dequeue)) {
+	if (trb_is_link(ep_ring->dequeue)) {
 		ep_ring->deq_seg = ep_ring->deq_seg->next;
 		ep_ring->dequeue = ep_ring->deq_seg->trbs;
 	}
@@ -926,8 +936,7 @@
 		/* We have more usable TRBs */
 		ep_ring->num_trbs_free++;
 		ep_ring->dequeue++;
-		if (last_trb(xhci, ep_ring, ep_ring->deq_seg,
-				ep_ring->dequeue)) {
+		if (trb_is_link(ep_ring->dequeue)) {
 			if (ep_ring->dequeue ==
 					dev->eps[ep_index].queued_deq_ptr)
 				break;
@@ -1865,6 +1874,10 @@
 	urb = td->urb;
 	urb_priv = urb->hcpriv;
 
+	/* if a bounce buffer was used to align this td then unmap it */
+	if (td->bounce_seg)
+		xhci_unmap_td_bounce_buffer(xhci, ep_ring, td);
+
 	/* Do one last check of the actual transfer length.
 	 * If the host controller said we transferred more data than the buffer
 	 * length, urb->actual_length will be a very big number (since it's
@@ -2865,36 +2878,29 @@
 		}
 	}
 
-	if (enqueue_is_link_trb(ep_ring)) {
-		struct xhci_ring *ring = ep_ring;
-		union xhci_trb *next;
+	while (trb_is_link(ep_ring->enqueue)) {
+		/* If we're not dealing with 0.95 hardware or isoc rings
+		 * on AMD 0.96 host, clear the chain bit.
+		 */
+		if (!xhci_link_trb_quirk(xhci) &&
+		    !(ep_ring->type == TYPE_ISOC &&
+		      (xhci->quirks & XHCI_AMD_0x96_HOST)))
+			ep_ring->enqueue->link.control &=
+				cpu_to_le32(~TRB_CHAIN);
+		else
+			ep_ring->enqueue->link.control |=
+				cpu_to_le32(TRB_CHAIN);
 
-		next = ring->enqueue;
+		wmb();
+		ep_ring->enqueue->link.control ^= cpu_to_le32(TRB_CYCLE);
 
-		while (last_trb(xhci, ring, ring->enq_seg, next)) {
-			/* If we're not dealing with 0.95 hardware or isoc rings
-			 * on AMD 0.96 host, clear the chain bit.
-			 */
-			if (!xhci_link_trb_quirk(xhci) &&
-					!(ring->type == TYPE_ISOC &&
-					 (xhci->quirks & XHCI_AMD_0x96_HOST)))
-				next->link.control &= cpu_to_le32(~TRB_CHAIN);
-			else
-				next->link.control |= cpu_to_le32(TRB_CHAIN);
+		/* Toggle the cycle bit after the last ring segment. */
+		if (link_trb_toggles_cycle(ep_ring->enqueue))
+			ep_ring->cycle_state ^= 1;
 
-			wmb();
-			next->link.control ^= cpu_to_le32(TRB_CYCLE);
-
-			/* Toggle the cycle bit after the last ring segment. */
-			if (last_trb_on_last_seg(xhci, ring, ring->enq_seg, next)) {
-				ring->cycle_state ^= 1;
-			}
-			ring->enq_seg = ring->enq_seg->next;
-			ring->enqueue = ring->enq_seg->trbs;
-			next = ring->enqueue;
-		}
+		ep_ring->enq_seg = ep_ring->enq_seg->next;
+		ep_ring->enqueue = ep_ring->enq_seg->trbs;
 	}
-
 	return 0;
 }
 
@@ -3092,7 +3098,7 @@
  */
 static u32 xhci_td_remainder(struct xhci_hcd *xhci, int transferred,
 			      int trb_buff_len, unsigned int td_total_len,
-			      struct urb *urb, unsigned int num_trbs_left)
+			      struct urb *urb, bool more_trbs_coming)
 {
 	u32 maxp, total_packet_count;
 
@@ -3101,7 +3107,7 @@
 		return ((td_total_len - transferred) >> 10);
 
 	/* One TRB with a zero-length data packet. */
-	if (num_trbs_left == 0 || (transferred == 0 && trb_buff_len == 0) ||
+	if (!more_trbs_coming || (transferred == 0 && trb_buff_len == 0) ||
 	    trb_buff_len == td_total_len)
 		return 0;
 
@@ -3116,37 +3122,103 @@
 	return (total_packet_count - ((transferred + trb_buff_len) / maxp));
 }
 
+
+static int xhci_align_td(struct xhci_hcd *xhci, struct urb *urb, u32 enqd_len,
+			 u32 *trb_buff_len, struct xhci_segment *seg)
+{
+	struct device *dev = xhci_to_hcd(xhci)->self.controller;
+	unsigned int unalign;
+	unsigned int max_pkt;
+	u32 new_buff_len;
+
+	max_pkt = GET_MAX_PACKET(usb_endpoint_maxp(&urb->ep->desc));
+	unalign = (enqd_len + *trb_buff_len) % max_pkt;
+
+	/* we got lucky, last normal TRB data on segment is packet aligned */
+	if (unalign == 0)
+		return 0;
+
+	xhci_dbg(xhci, "Unaligned %d bytes, buff len %d\n",
+		 unalign, *trb_buff_len);
+
+	/* is the last nornal TRB alignable by splitting it */
+	if (*trb_buff_len > unalign) {
+		*trb_buff_len -= unalign;
+		xhci_dbg(xhci, "split align, new buff len %d\n", *trb_buff_len);
+		return 0;
+	}
+
+	/*
+	 * We want enqd_len + trb_buff_len to sum up to a number aligned to
+	 * number which is divisible by the endpoint's wMaxPacketSize. IOW:
+	 * (size of currently enqueued TRBs + remainder) % wMaxPacketSize == 0.
+	 */
+	new_buff_len = max_pkt - (enqd_len % max_pkt);
+
+	if (new_buff_len > (urb->transfer_buffer_length - enqd_len))
+		new_buff_len = (urb->transfer_buffer_length - enqd_len);
+
+	/* create a max max_pkt sized bounce buffer pointed to by last trb */
+	if (usb_urb_dir_out(urb)) {
+		sg_pcopy_to_buffer(urb->sg, urb->num_mapped_sgs,
+				   seg->bounce_buf, new_buff_len, enqd_len);
+		seg->bounce_dma = dma_map_single(dev, seg->bounce_buf,
+						 max_pkt, DMA_TO_DEVICE);
+	} else {
+		seg->bounce_dma = dma_map_single(dev, seg->bounce_buf,
+						 max_pkt, DMA_FROM_DEVICE);
+	}
+
+	if (dma_mapping_error(dev, seg->bounce_dma)) {
+		/* try without aligning. Some host controllers survive */
+		xhci_warn(xhci, "Failed mapping bounce buffer, not aligning\n");
+		return 0;
+	}
+	*trb_buff_len = new_buff_len;
+	seg->bounce_len = new_buff_len;
+	seg->bounce_offs = enqd_len;
+
+	xhci_dbg(xhci, "Bounce align, new buff len %d\n", *trb_buff_len);
+
+	return 1;
+}
+
 /* This is very similar to what ehci-q.c qtd_fill() does */
 int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 		struct urb *urb, int slot_id, unsigned int ep_index)
 {
-	struct xhci_ring *ep_ring;
+	struct xhci_ring *ring;
 	struct urb_priv *urb_priv;
 	struct xhci_td *td;
 	struct xhci_generic_trb *start_trb;
 	struct scatterlist *sg = NULL;
-	bool more_trbs_coming;
-	bool zero_length_needed;
-	unsigned int num_trbs, last_trb_num, i;
+	bool more_trbs_coming = true;
+	bool need_zero_pkt = false;
+	bool first_trb = true;
+	unsigned int num_trbs;
 	unsigned int start_cycle, num_sgs = 0;
-	unsigned int running_total, block_len, trb_buff_len;
-	unsigned int full_len;
-	int ret;
+	unsigned int enqd_len, block_len, trb_buff_len, full_len;
+	int sent_len, ret;
 	u32 field, length_field, remainder;
-	u64 addr;
+	u64 addr, send_addr;
 
-	ep_ring = xhci_urb_to_transfer_ring(xhci, urb);
-	if (!ep_ring)
+	ring = xhci_urb_to_transfer_ring(xhci, urb);
+	if (!ring)
 		return -EINVAL;
 
+	full_len = urb->transfer_buffer_length;
 	/* If we have scatter/gather list, we use it. */
 	if (urb->num_sgs) {
 		num_sgs = urb->num_mapped_sgs;
 		sg = urb->sg;
+		addr = (u64) sg_dma_address(sg);
+		block_len = sg_dma_len(sg);
 		num_trbs = count_sg_trbs_needed(urb);
-	} else
+	} else {
 		num_trbs = count_trbs_needed(urb);
-
+		addr = (u64) urb->transfer_dma;
+		block_len = full_len;
+	}
 	ret = prepare_transfer(xhci, xhci->devs[slot_id],
 			ep_index, urb->stream_id,
 			num_trbs, urb, 0, mem_flags);
@@ -3155,20 +3227,9 @@
 
 	urb_priv = urb->hcpriv;
 
-	last_trb_num = num_trbs - 1;
-
 	/* Deal with URB_ZERO_PACKET - need one more td/trb */
-	zero_length_needed = urb->transfer_flags & URB_ZERO_PACKET &&
-		urb_priv->length == 2;
-	if (zero_length_needed) {
-		num_trbs++;
-		xhci_dbg(xhci, "Creating zero length td.\n");
-		ret = prepare_transfer(xhci, xhci->devs[slot_id],
-				ep_index, urb->stream_id,
-				1, urb, 1, mem_flags);
-		if (unlikely(ret < 0))
-			return ret;
-	}
+	if (urb->transfer_flags & URB_ZERO_PACKET && urb_priv->length > 1)
+		need_zero_pkt = true;
 
 	td = urb_priv->td[0];
 
@@ -3177,102 +3238,97 @@
 	 * until we've finished creating all the other TRBs.  The ring's cycle
 	 * state may change as we enqueue the other TRBs, so save it too.
 	 */
-	start_trb = &ep_ring->enqueue->generic;
-	start_cycle = ep_ring->cycle_state;
-
-	full_len = urb->transfer_buffer_length;
-	running_total = 0;
-	block_len = 0;
+	start_trb = &ring->enqueue->generic;
+	start_cycle = ring->cycle_state;
+	send_addr = addr;
 
 	/* Queue the TRBs, even if they are zero-length */
-	for (i = 0; i < num_trbs; i++) {
+	for (enqd_len = 0; enqd_len < full_len; enqd_len += trb_buff_len) {
 		field = TRB_TYPE(TRB_NORMAL);
 
-		if (block_len == 0) {
-			/* A new contiguous block. */
-			if (sg) {
-				addr = (u64) sg_dma_address(sg);
-				block_len = sg_dma_len(sg);
-			} else {
-				addr = (u64) urb->transfer_dma;
-				block_len = full_len;
-			}
-			/* TRB buffer should not cross 64KB boundaries */
-			trb_buff_len = TRB_BUFF_LEN_UP_TO_BOUNDARY(addr);
-			trb_buff_len = min_t(unsigned int,
-								trb_buff_len,
-								block_len);
-		} else {
-			/* Further through the contiguous block. */
-			trb_buff_len = block_len;
-			if (trb_buff_len > TRB_MAX_BUFF_SIZE)
-				trb_buff_len = TRB_MAX_BUFF_SIZE;
-		}
+		/* TRB buffer should not cross 64KB boundaries */
+		trb_buff_len = TRB_BUFF_LEN_UP_TO_BOUNDARY(addr);
+		trb_buff_len = min_t(unsigned int, trb_buff_len, block_len);
 
-		if (running_total + trb_buff_len > full_len)
-			trb_buff_len = full_len - running_total;
+		if (enqd_len + trb_buff_len > full_len)
+			trb_buff_len = full_len - enqd_len;
 
 		/* Don't change the cycle bit of the first TRB until later */
-		if (i == 0) {
+		if (first_trb) {
+			first_trb = false;
 			if (start_cycle == 0)
 				field |= TRB_CYCLE;
 		} else
-			field |= ep_ring->cycle_state;
+			field |= ring->cycle_state;
 
 		/* Chain all the TRBs together; clear the chain bit in the last
 		 * TRB to indicate it's the last TRB in the chain.
 		 */
-		if (i < last_trb_num) {
+		if (enqd_len + trb_buff_len < full_len) {
 			field |= TRB_CHAIN;
-		} else {
-			field |= TRB_IOC;
-			if (i == last_trb_num)
-				td->last_trb = ep_ring->enqueue;
-			else if (zero_length_needed) {
-				trb_buff_len = 0;
-				urb_priv->td[1]->last_trb = ep_ring->enqueue;
+			if (trb_is_link(ring->enqueue + 1)) {
+				if (xhci_align_td(xhci, urb, enqd_len,
+						  &trb_buff_len,
+						  ring->enq_seg)) {
+					send_addr = ring->enq_seg->bounce_dma;
+					/* assuming TD won't span 2 segs */
+					td->bounce_seg = ring->enq_seg;
+				}
 			}
 		}
+		if (enqd_len + trb_buff_len >= full_len) {
+			field &= ~TRB_CHAIN;
+			field |= TRB_IOC;
+			more_trbs_coming = false;
+			td->last_trb = ring->enqueue;
+		}
 
 		/* Only set interrupt on short packet for IN endpoints */
 		if (usb_urb_dir_in(urb))
 			field |= TRB_ISP;
 
 		/* Set the TRB length, TD size, and interrupter fields. */
-		remainder = xhci_td_remainder(xhci, running_total,
-							trb_buff_len, full_len,
-							urb, num_trbs - i - 1);
+		remainder = xhci_td_remainder(xhci, enqd_len, trb_buff_len,
+					      full_len, urb, more_trbs_coming);
 
 		length_field = TRB_LEN(trb_buff_len) |
 			TRB_TD_SIZE(remainder) |
 			TRB_INTR_TARGET(0);
 
-		if (i < num_trbs - 1)
-			more_trbs_coming = true;
-		else
-			more_trbs_coming = false;
-		queue_trb(xhci, ep_ring, more_trbs_coming,
-				lower_32_bits(addr),
-				upper_32_bits(addr),
+		queue_trb(xhci, ring, more_trbs_coming | need_zero_pkt,
+				lower_32_bits(send_addr),
+				upper_32_bits(send_addr),
 				length_field,
 				field);
 
-		running_total += trb_buff_len;
 		addr += trb_buff_len;
-		block_len -= trb_buff_len;
+		sent_len = trb_buff_len;
 
-		if (sg) {
-			if (block_len == 0) {
-				/* New sg entry */
-				--num_sgs;
-				if (num_sgs == 0)
-					break;
+		while (sg && sent_len >= block_len) {
+			/* New sg entry */
+			--num_sgs;
+			sent_len -= block_len;
+			if (num_sgs != 0) {
 				sg = sg_next(sg);
+				block_len = sg_dma_len(sg);
+				addr = (u64) sg_dma_address(sg);
+				addr += sent_len;
 			}
 		}
+		block_len -= sent_len;
+		send_addr = addr;
 	}
 
-	check_trb_math(urb, running_total);
+	if (need_zero_pkt) {
+		ret = prepare_transfer(xhci, xhci->devs[slot_id],
+				       ep_index, urb->stream_id,
+				       1, urb, 1, mem_flags);
+		urb_priv->td[1]->last_trb = ring->enqueue;
+		field = TRB_TYPE(TRB_NORMAL) | ring->cycle_state | TRB_IOC;
+		queue_trb(xhci, ring, 0, 0, 0, TRB_INTR_TARGET(0), field);
+	}
+
+	check_trb_math(urb, enqd_len);
 	giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
 			start_cycle, start_trb);
 	return 0;
@@ -3666,7 +3722,7 @@
 			/* Set the TRB length, TD size, & interrupter fields. */
 			remainder = xhci_td_remainder(xhci, running_total,
 						   trb_buff_len, td_len,
-						   urb, trbs_per_td - j - 1);
+						   urb, more_trbs_coming);
 
 			length_field = TRB_LEN(trb_buff_len) |
 				TRB_INTR_TARGET(0);
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index f2f9518..9da9832 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -3139,6 +3139,7 @@
 	struct xhci_input_control_ctx *ctrl_ctx;
 	unsigned int ep_index;
 	unsigned int num_stream_ctxs;
+	unsigned int max_packet;
 	unsigned long flags;
 	u32 changed_ep_bitmask = 0;
 
@@ -3212,9 +3213,11 @@
 
 	for (i = 0; i < num_eps; i++) {
 		ep_index = xhci_get_endpoint_index(&eps[i]->desc);
+		max_packet = GET_MAX_PACKET(usb_endpoint_maxp(&eps[i]->desc));
 		vdev->eps[ep_index].stream_info = xhci_alloc_stream_info(xhci,
 				num_stream_ctxs,
-				num_streams, mem_flags);
+				num_streams,
+				max_packet, mem_flags);
 		if (!vdev->eps[ep_index].stream_info)
 			goto cleanup;
 		/* Set maxPstreams in endpoint context and update deq ptr to
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index b0b8d0f..b2c1dc5 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1347,6 +1347,11 @@
 	/* private to HCD */
 	struct xhci_segment	*next;
 	dma_addr_t		dma;
+	/* Max packet sized bounce buffer for td-fragmant alignment */
+	dma_addr_t		bounce_dma;
+	void			*bounce_buf;
+	unsigned int		bounce_offs;
+	unsigned int		bounce_len;
 };
 
 struct xhci_td {
@@ -1356,6 +1361,7 @@
 	struct xhci_segment	*start_seg;
 	union xhci_trb		*first_trb;
 	union xhci_trb		*last_trb;
+	struct xhci_segment	*bounce_seg;
 	/* actual_length of the URB has already been set */
 	bool			urb_length_set;
 };
@@ -1405,6 +1411,7 @@
 	unsigned int		num_segs;
 	unsigned int		num_trbs_free;
 	unsigned int		num_trbs_free_temp;
+	unsigned int		bounce_buf_len;
 	enum xhci_ring_type	type;
 	bool			last_td_was_short;
 	struct radix_tree_root	*trb_address_map;
@@ -1807,7 +1814,8 @@
 		unsigned int ep_index);
 struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci,
 		unsigned int num_stream_ctxs,
-		unsigned int num_streams, gfp_t flags);
+		unsigned int num_streams,
+		unsigned int max_packet, gfp_t flags);
 void xhci_free_stream_info(struct xhci_hcd *xhci,
 		struct xhci_stream_info *stream_info);
 void xhci_setup_streams_ep_input_ctx(struct xhci_hcd *xhci,
diff --git a/drivers/usb/image/microtek.h b/drivers/usb/image/microtek.h
index ccce318..7e32ae7 100644
--- a/drivers/usb/image/microtek.h
+++ b/drivers/usb/image/microtek.h
@@ -13,11 +13,11 @@
 
 struct mts_transfer_context
 {
-	struct mts_desc* instance;
+	struct mts_desc *instance;
 	mts_scsi_cmnd_callback final_callback;
 	struct scsi_cmnd *srb;
 	
-	void* data;
+	void *data;
 	unsigned data_length;
 	int data_pipe;
 	int fragment;
@@ -38,7 +38,7 @@
 	u8 ep_response;
 	u8 ep_image;
 
-	struct Scsi_Host * host;
+	struct Scsi_Host *host;
 
 	struct urb *urb;
 	struct mts_transfer_context context;
diff --git a/drivers/usb/misc/usb3503.c b/drivers/usb/misc/usb3503.c
index b45cb77..8e7737d 100644
--- a/drivers/usb/misc/usb3503.c
+++ b/drivers/usb/misc/usb3503.c
@@ -330,6 +330,17 @@
 	return usb3503_probe(hub);
 }
 
+static int usb3503_i2c_remove(struct i2c_client *i2c)
+{
+	struct usb3503 *hub;
+
+	hub = i2c_get_clientdata(i2c);
+	if (hub->clk)
+		clk_disable_unprepare(hub->clk);
+
+	return 0;
+}
+
 static int usb3503_platform_probe(struct platform_device *pdev)
 {
 	struct usb3503 *hub;
@@ -338,10 +349,22 @@
 	if (!hub)
 		return -ENOMEM;
 	hub->dev = &pdev->dev;
+	platform_set_drvdata(pdev, hub);
 
 	return usb3503_probe(hub);
 }
 
+static int usb3503_platform_remove(struct platform_device *pdev)
+{
+	struct usb3503 *hub;
+
+	hub = platform_get_drvdata(pdev);
+	if (hub->clk)
+		clk_disable_unprepare(hub->clk);
+
+	return 0;
+}
+
 #ifdef CONFIG_PM_SLEEP
 static int usb3503_i2c_suspend(struct device *dev)
 {
@@ -395,6 +418,7 @@
 		.of_match_table = of_match_ptr(usb3503_of_match),
 	},
 	.probe		= usb3503_i2c_probe,
+	.remove		= usb3503_i2c_remove,
 	.id_table	= usb3503_id,
 };
 
@@ -404,6 +428,7 @@
 		.of_match_table = of_match_ptr(usb3503_of_match),
 	},
 	.probe		= usb3503_platform_probe,
+	.remove		= usb3503_platform_remove,
 };
 
 static int __init usb3503_init(void)
diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile
index f95befe..689d42a 100644
--- a/drivers/usb/musb/Makefile
+++ b/drivers/usb/musb/Makefile
@@ -2,9 +2,12 @@
 # for USB OTG silicon based on Mentor Graphics INVENTRA designs
 #
 
+# define_trace.h needs to know how to find our header
+CFLAGS_musb_trace.o	:= -I$(src)
+
 obj-$(CONFIG_USB_MUSB_HDRC) += musb_hdrc.o
 
-musb_hdrc-y := musb_core.o
+musb_hdrc-y := musb_core.o musb_trace.o
 
 musb_hdrc-$(CONFIG_USB_MUSB_HOST)$(CONFIG_USB_MUSB_DUAL_ROLE) += musb_virthub.o musb_host.o
 musb_hdrc-$(CONFIG_USB_MUSB_GADGET)$(CONFIG_USB_MUSB_DUAL_ROLE) += musb_gadget_ep0.o musb_gadget.o
diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
index cc13410..1ae48e6 100644
--- a/drivers/usb/musb/cppi_dma.c
+++ b/drivers/usb/musb/cppi_dma.c
@@ -14,6 +14,7 @@
 #include "musb_core.h"
 #include "musb_debug.h"
 #include "cppi_dma.h"
+#include "davinci.h"
 
 
 /* CPPI DMA status 7-mar-2006:
@@ -232,7 +233,7 @@
 	musb_writel(tibase, DAVINCI_RXCPPI_INTCLR_REG,
 			DAVINCI_DMA_ALL_CHANNELS_ENABLE);
 
-	dev_dbg(musb->controller, "Tearing down RX and TX Channels\n");
+	musb_dbg(musb, "Tearing down RX and TX Channels");
 	for (i = 0; i < ARRAY_SIZE(controller->tx); i++) {
 		/* FIXME restructure of txdma to use bds like rxdma */
 		controller->tx[i].last_processed = NULL;
@@ -297,13 +298,13 @@
 	 */
 	if (transmit) {
 		if (index >= ARRAY_SIZE(controller->tx)) {
-			dev_dbg(musb->controller, "no %cX%d CPPI channel\n", 'T', index);
+			musb_dbg(musb, "no %cX%d CPPI channel", 'T', index);
 			return NULL;
 		}
 		cppi_ch = controller->tx + index;
 	} else {
 		if (index >= ARRAY_SIZE(controller->rx)) {
-			dev_dbg(musb->controller, "no %cX%d CPPI channel\n", 'R', index);
+			musb_dbg(musb, "no %cX%d CPPI channel", 'R', index);
 			return NULL;
 		}
 		cppi_ch = controller->rx + index;
@@ -314,13 +315,13 @@
 	 * with the other DMA engine too
 	 */
 	if (cppi_ch->hw_ep)
-		dev_dbg(musb->controller, "re-allocating DMA%d %cX channel %p\n",
+		musb_dbg(musb, "re-allocating DMA%d %cX channel %p",
 				index, transmit ? 'T' : 'R', cppi_ch);
 	cppi_ch->hw_ep = ep;
 	cppi_ch->channel.status = MUSB_DMA_STATUS_FREE;
 	cppi_ch->channel.max_len = 0x7fffffff;
 
-	dev_dbg(musb->controller, "Allocate CPPI%d %cX\n", index, transmit ? 'T' : 'R');
+	musb_dbg(musb, "Allocate CPPI%d %cX", index, transmit ? 'T' : 'R');
 	return &cppi_ch->channel;
 }
 
@@ -335,8 +336,8 @@
 	c = container_of(channel, struct cppi_channel, channel);
 	tibase = c->controller->tibase;
 	if (!c->hw_ep)
-		dev_dbg(c->controller->musb->controller,
-			"releasing idle DMA channel %p\n", c);
+		musb_dbg(c->controller->musb,
+			"releasing idle DMA channel %p", c);
 	else if (!c->transmit)
 		core_rxirq_enable(tibase, c->index + 1);
 
@@ -354,11 +355,10 @@
 
 	musb_ep_select(base, c->index + 1);
 
-	dev_dbg(c->controller->musb->controller,
+	musb_dbg(c->controller->musb,
 		"RX DMA%d%s: %d left, csr %04x, "
 		"%08x H%08x S%08x C%08x, "
-		"B%08x L%08x %08x .. %08x"
-		"\n",
+		"B%08x L%08x %08x .. %08x",
 		c->index, tag,
 		musb_readl(c->controller->tibase,
 			DAVINCI_RXCPPI_BUFCNT0_REG + 4 * c->index),
@@ -385,11 +385,10 @@
 
 	musb_ep_select(base, c->index + 1);
 
-	dev_dbg(c->controller->musb->controller,
+	musb_dbg(c->controller->musb,
 		"TX DMA%d%s: csr %04x, "
 		"H%08x S%08x C%08x %08x, "
-		"F%08x L%08x .. %08x"
-		"\n",
+		"F%08x L%08x .. %08x",
 		c->index, tag,
 		musb_readw(c->hw_ep->regs, MUSB_TXCSR),
 
@@ -590,7 +589,7 @@
 		length = min(n_bds * maxpacket, length);
 	}
 
-	dev_dbg(musb->controller, "TX DMA%d, pktSz %d %s bds %d dma 0x%llx len %u\n",
+	musb_dbg(musb, "TX DMA%d, pktSz %d %s bds %d dma 0x%llx len %u",
 			tx->index,
 			maxpacket,
 			rndis ? "rndis" : "transparent",
@@ -647,7 +646,7 @@
 				bd->hw_options |= CPPI_ZERO_SET;
 		}
 
-		dev_dbg(musb->controller, "TXBD %p: nxt %08x buf %08x len %04x opt %08x\n",
+		musb_dbg(musb, "TXBD %p: nxt %08x buf %08x len %04x opt %08x",
 				bd, bd->hw_next, bd->hw_bufp,
 				bd->hw_off_len, bd->hw_options);
 
@@ -813,8 +812,8 @@
 
 	length = min(n_bds * maxpacket, length);
 
-	dev_dbg(musb->controller, "RX DMA%d seg, maxp %d %s bds %d (cnt %d) "
-			"dma 0x%llx len %u %u/%u\n",
+	musb_dbg(musb, "RX DMA%d seg, maxp %d %s bds %d (cnt %d) "
+			"dma 0x%llx len %u %u/%u",
 			rx->index, maxpacket,
 			onepacket
 				? (is_rndis ? "rndis" : "onepacket")
@@ -924,7 +923,7 @@
 			DAVINCI_RXCPPI_BUFCNT0_REG + (rx->index * 4))
 			& 0xffff;
 	if (i < (2 + n_bds)) {
-		dev_dbg(musb->controller, "bufcnt%d underrun - %d (for %d)\n",
+		musb_dbg(musb, "bufcnt%d underrun - %d (for %d)",
 					rx->index, i, n_bds);
 		musb_writel(tibase,
 			DAVINCI_RXCPPI_BUFCNT0_REG + (rx->index * 4),
@@ -973,7 +972,7 @@
 		/* WARN_ON(1); */
 		break;
 	case MUSB_DMA_STATUS_UNKNOWN:
-		dev_dbg(musb->controller, "%cX DMA%d not allocated!\n",
+		musb_dbg(musb, "%cX DMA%d not allocated!",
 				cppi_ch->transmit ? 'T' : 'R',
 				cppi_ch->index);
 		/* FALLTHROUGH */
@@ -1029,8 +1028,8 @@
 		if (!completed && (bd->hw_options & CPPI_OWN_SET))
 			break;
 
-		dev_dbg(musb->controller, "C/RXBD %llx: nxt %08x buf %08x "
-			"off.len %08x opt.len %08x (%d)\n",
+		musb_dbg(musb, "C/RXBD %llx: nxt %08x buf %08x "
+			"off.len %08x opt.len %08x (%d)",
 			(unsigned long long)bd->dma, bd->hw_next, bd->hw_bufp,
 			bd->hw_off_len, bd->hw_options,
 			rx->channel.actual_len);
@@ -1051,7 +1050,7 @@
 			 * CPPI ignores those BDs even though OWN is still set.
 			 */
 			completed = true;
-			dev_dbg(musb->controller, "rx short %d/%d (%d)\n",
+			musb_dbg(musb, "rx short %d/%d (%d)",
 					len, bd->buflen,
 					rx->channel.actual_len);
 		}
@@ -1101,7 +1100,7 @@
 		musb_ep_select(cppi->mregs, rx->index + 1);
 		csr = musb_readw(regs, MUSB_RXCSR);
 		if (csr & MUSB_RXCSR_DMAENAB) {
-			dev_dbg(musb->controller, "list%d %p/%p, last %llx%s, csr %04x\n",
+			musb_dbg(musb, "list%d %p/%p, last %llx%s, csr %04x",
 				rx->index,
 				rx->head, rx->tail,
 				rx->last_processed
@@ -1164,7 +1163,7 @@
 		return IRQ_NONE;
 	}
 
-	dev_dbg(musb->controller, "CPPI IRQ Tx%x Rx%x\n", tx, rx);
+	musb_dbg(musb, "CPPI IRQ Tx%x Rx%x", tx, rx);
 
 	/* process TX channels */
 	for (index = 0; tx; tx = tx >> 1, index++) {
@@ -1192,7 +1191,7 @@
 		 * that needs to be acknowledged.
 		 */
 		if (NULL == bd) {
-			dev_dbg(musb->controller, "null BD\n");
+			musb_dbg(musb, "null BD");
 			musb_writel(&tx_ram->tx_complete, 0, 0);
 			continue;
 		}
@@ -1207,7 +1206,7 @@
 			if (bd->hw_options & CPPI_OWN_SET)
 				break;
 
-			dev_dbg(musb->controller, "C/TXBD %p n %x b %x off %x opt %x\n",
+			musb_dbg(musb, "C/TXBD %p n %x b %x off %x opt %x",
 					bd, bd->hw_next, bd->hw_bufp,
 					bd->hw_off_len, bd->hw_options);
 
diff --git a/drivers/usb/musb/cppi_dma.h b/drivers/usb/musb/cppi_dma.h
index 59bf949..7fdfb71 100644
--- a/drivers/usb/musb/cppi_dma.h
+++ b/drivers/usb/musb/cppi_dma.h
@@ -7,17 +7,10 @@
 #include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/dmapool.h>
+#include <linux/dmaengine.h>
 
-#include "musb_dma.h"
 #include "musb_core.h"
-
-
-/* FIXME fully isolate CPPI from DaVinci ... the "CPPI generic" registers
- * would seem to be shared with the TUSB6020 (over VLYNQ).
- */
-
-#include "davinci.h"
-
+#include "musb_dma.h"
 
 /* CPPI RX/TX state RAM */
 
@@ -131,4 +124,24 @@
 /* CPPI IRQ handler */
 extern irqreturn_t cppi_interrupt(int, void *);
 
+struct cppi41_dma_channel {
+	struct dma_channel channel;
+	struct cppi41_dma_controller *controller;
+	struct musb_hw_ep *hw_ep;
+	struct dma_chan *dc;
+	dma_cookie_t cookie;
+	u8 port_num;
+	u8 is_tx;
+	u8 is_allocated;
+	u8 usb_toggle;
+
+	dma_addr_t buf_addr;
+	u32 total_len;
+	u32 prog_len;
+	u32 transferred;
+	u32 packet_sz;
+	struct list_head tx_check;
+	int tx_zlp;
+};
+
 #endif				/* end of ifndef _CPPI_DMA_H_ */
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index f824336..74fc306 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -102,6 +102,7 @@
 #include <linux/usb.h>
 
 #include "musb_core.h"
+#include "musb_trace.h"
 
 #define TA_WAIT_BCON(m) max_t(int, (m)->a_wait_bcon, OTG_TIME_A_WAIT_BCON)
 
@@ -258,31 +259,43 @@
 
 static u8 musb_default_readb(const void __iomem *addr, unsigned offset)
 {
-	return __raw_readb(addr + offset);
+	u8 data =  __raw_readb(addr + offset);
+
+	trace_musb_readb(__builtin_return_address(0), addr, offset, data);
+	return data;
 }
 
 static void musb_default_writeb(void __iomem *addr, unsigned offset, u8 data)
 {
+	trace_musb_writeb(__builtin_return_address(0), addr, offset, data);
 	__raw_writeb(data, addr + offset);
 }
 
 static u16 musb_default_readw(const void __iomem *addr, unsigned offset)
 {
-	return __raw_readw(addr + offset);
+	u16 data = __raw_readw(addr + offset);
+
+	trace_musb_readw(__builtin_return_address(0), addr, offset, data);
+	return data;
 }
 
 static void musb_default_writew(void __iomem *addr, unsigned offset, u16 data)
 {
+	trace_musb_writew(__builtin_return_address(0), addr, offset, data);
 	__raw_writew(data, addr + offset);
 }
 
 static u32 musb_default_readl(const void __iomem *addr, unsigned offset)
 {
-	return __raw_readl(addr + offset);
+	u32 data = __raw_readl(addr + offset);
+
+	trace_musb_readl(__builtin_return_address(0), addr, offset, data);
+	return data;
 }
 
 static void musb_default_writel(void __iomem *addr, unsigned offset, u32 data)
 {
+	trace_musb_writel(__builtin_return_address(0), addr, offset, data);
 	__raw_writel(data, addr + offset);
 }
 
@@ -461,20 +474,21 @@
 	spin_lock_irqsave(&musb->lock, flags);
 	switch (musb->xceiv->otg->state) {
 	case OTG_STATE_B_WAIT_ACON:
-		dev_dbg(musb->controller, "HNP: b_wait_acon timeout; back to b_peripheral\n");
+		musb_dbg(musb,
+			"HNP: b_wait_acon timeout; back to b_peripheral");
 		musb_g_disconnect(musb);
 		musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL;
 		musb->is_active = 0;
 		break;
 	case OTG_STATE_A_SUSPEND:
 	case OTG_STATE_A_WAIT_BCON:
-		dev_dbg(musb->controller, "HNP: %s timeout\n",
+		musb_dbg(musb, "HNP: %s timeout",
 			usb_otg_state_string(musb->xceiv->otg->state));
 		musb_platform_set_vbus(musb, 0);
 		musb->xceiv->otg->state = OTG_STATE_A_WAIT_VFALL;
 		break;
 	default:
-		dev_dbg(musb->controller, "HNP: Unhandled mode %s\n",
+		musb_dbg(musb, "HNP: Unhandled mode %s",
 			usb_otg_state_string(musb->xceiv->otg->state));
 	}
 	spin_unlock_irqrestore(&musb->lock, flags);
@@ -489,17 +503,17 @@
 	void __iomem	*mbase = musb->mregs;
 	u8	reg;
 
-	dev_dbg(musb->controller, "HNP: stop from %s\n",
+	musb_dbg(musb, "HNP: stop from %s",
 			usb_otg_state_string(musb->xceiv->otg->state));
 
 	switch (musb->xceiv->otg->state) {
 	case OTG_STATE_A_PERIPHERAL:
 		musb_g_disconnect(musb);
-		dev_dbg(musb->controller, "HNP: back to %s\n",
+		musb_dbg(musb, "HNP: back to %s",
 			usb_otg_state_string(musb->xceiv->otg->state));
 		break;
 	case OTG_STATE_B_HOST:
-		dev_dbg(musb->controller, "HNP: Disabling HR\n");
+		musb_dbg(musb, "HNP: Disabling HR");
 		if (hcd)
 			hcd->self.is_b_host = 0;
 		musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL;
@@ -510,7 +524,7 @@
 		/* REVISIT: Start SESSION_REQUEST here? */
 		break;
 	default:
-		dev_dbg(musb->controller, "HNP: Stopping in unknown state %s\n",
+		musb_dbg(musb, "HNP: Stopping in unknown state %s",
 			usb_otg_state_string(musb->xceiv->otg->state));
 	}
 
@@ -541,8 +555,7 @@
 {
 	irqreturn_t handled = IRQ_NONE;
 
-	dev_dbg(musb->controller, "<== DevCtl=%02x, int_usb=0x%x\n", devctl,
-		int_usb);
+	musb_dbg(musb, "<== DevCtl=%02x, int_usb=0x%x", devctl, int_usb);
 
 	/* in host mode, the peripheral may issue remote wakeup.
 	 * in peripheral mode, the host may resume the link.
@@ -550,7 +563,7 @@
 	 */
 	if (int_usb & MUSB_INTR_RESUME) {
 		handled = IRQ_HANDLED;
-		dev_dbg(musb->controller, "RESUME (%s)\n",
+		musb_dbg(musb, "RESUME (%s)",
 				usb_otg_state_string(musb->xceiv->otg->state));
 
 		if (devctl & MUSB_DEVCTL_HM) {
@@ -619,11 +632,11 @@
 
 		if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS
 				&& (devctl & MUSB_DEVCTL_BDEVICE)) {
-			dev_dbg(musb->controller, "SessReq while on B state\n");
+			musb_dbg(musb, "SessReq while on B state");
 			return IRQ_HANDLED;
 		}
 
-		dev_dbg(musb->controller, "SESSION_REQUEST (%s)\n",
+		musb_dbg(musb, "SESSION_REQUEST (%s)",
 			usb_otg_state_string(musb->xceiv->otg->state));
 
 		/* IRQ arrives from ID pin sense or (later, if VBUS power
@@ -714,7 +727,7 @@
 	}
 
 	if (int_usb & MUSB_INTR_SUSPEND) {
-		dev_dbg(musb->controller, "SUSPEND (%s) devctl %02x\n",
+		musb_dbg(musb, "SUSPEND (%s) devctl %02x",
 			usb_otg_state_string(musb->xceiv->otg->state), devctl);
 		handled = IRQ_HANDLED;
 
@@ -743,7 +756,7 @@
 			musb->is_active = musb->g.b_hnp_enable;
 			if (musb->is_active) {
 				musb->xceiv->otg->state = OTG_STATE_B_WAIT_ACON;
-				dev_dbg(musb->controller, "HNP: Setting timer for b_ase0_brst\n");
+				musb_dbg(musb, "HNP: Setting timer for b_ase0_brst");
 				mod_timer(&musb->otg_timer, jiffies
 					+ msecs_to_jiffies(
 							OTG_TIME_B_ASE0_BRST));
@@ -760,7 +773,7 @@
 			break;
 		case OTG_STATE_B_HOST:
 			/* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */
-			dev_dbg(musb->controller, "REVISIT: SUSPEND as B_HOST\n");
+			musb_dbg(musb, "REVISIT: SUSPEND as B_HOST");
 			break;
 		default:
 			/* "should not happen" */
@@ -797,14 +810,14 @@
 		switch (musb->xceiv->otg->state) {
 		case OTG_STATE_B_PERIPHERAL:
 			if (int_usb & MUSB_INTR_SUSPEND) {
-				dev_dbg(musb->controller, "HNP: SUSPEND+CONNECT, now b_host\n");
+				musb_dbg(musb, "HNP: SUSPEND+CONNECT, now b_host");
 				int_usb &= ~MUSB_INTR_SUSPEND;
 				goto b_host;
 			} else
-				dev_dbg(musb->controller, "CONNECT as b_peripheral???\n");
+				musb_dbg(musb, "CONNECT as b_peripheral???");
 			break;
 		case OTG_STATE_B_WAIT_ACON:
-			dev_dbg(musb->controller, "HNP: CONNECT, now b_host\n");
+			musb_dbg(musb, "HNP: CONNECT, now b_host");
 b_host:
 			musb->xceiv->otg->state = OTG_STATE_B_HOST;
 			if (musb->hcd)
@@ -823,12 +836,12 @@
 
 		musb_host_poke_root_hub(musb);
 
-		dev_dbg(musb->controller, "CONNECT (%s) devctl %02x\n",
+		musb_dbg(musb, "CONNECT (%s) devctl %02x",
 				usb_otg_state_string(musb->xceiv->otg->state), devctl);
 	}
 
 	if (int_usb & MUSB_INTR_DISCONNECT) {
-		dev_dbg(musb->controller, "DISCONNECT (%s) as %s, devctl %02x\n",
+		musb_dbg(musb, "DISCONNECT (%s) as %s, devctl %02x",
 				usb_otg_state_string(musb->xceiv->otg->state),
 				MUSB_MODE(musb), devctl);
 		handled = IRQ_HANDLED;
@@ -891,7 +904,7 @@
 			if (is_host_active(musb))
 				musb_recover_from_babble(musb);
 		} else {
-			dev_dbg(musb->controller, "BUS RESET as %s\n",
+			musb_dbg(musb, "BUS RESET as %s",
 				usb_otg_state_string(musb->xceiv->otg->state));
 			switch (musb->xceiv->otg->state) {
 			case OTG_STATE_A_SUSPEND:
@@ -899,7 +912,7 @@
 				/* FALLTHROUGH */
 			case OTG_STATE_A_WAIT_BCON:	/* OPT TD.4.7-900ms */
 				/* never use invalid T(a_wait_bcon) */
-				dev_dbg(musb->controller, "HNP: in %s, %d msec timeout\n",
+				musb_dbg(musb, "HNP: in %s, %d msec timeout",
 					usb_otg_state_string(musb->xceiv->otg->state),
 					TA_WAIT_BCON(musb));
 				mod_timer(&musb->otg_timer, jiffies
@@ -910,7 +923,7 @@
 				musb_g_reset(musb);
 				break;
 			case OTG_STATE_B_WAIT_ACON:
-				dev_dbg(musb->controller, "HNP: RESET (%s), to b_peripheral\n",
+				musb_dbg(musb, "HNP: RESET (%s), to b_peripheral",
 					usb_otg_state_string(musb->xceiv->otg->state));
 				musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL;
 				musb_g_reset(musb);
@@ -922,7 +935,7 @@
 				musb_g_reset(musb);
 				break;
 			default:
-				dev_dbg(musb->controller, "Unhandled BUS RESET as %s\n",
+				musb_dbg(musb, "Unhandled BUS RESET as %s",
 					usb_otg_state_string(musb->xceiv->otg->state));
 			}
 		}
@@ -1030,7 +1043,7 @@
 	u8              devctl = musb_readb(regs, MUSB_DEVCTL);
 	u8		power;
 
-	dev_dbg(musb->controller, "<== devctl %02x\n", devctl);
+	musb_dbg(musb, "<== devctl %02x", devctl);
 
 	musb_enable_interrupts(musb);
 	musb_writeb(regs, MUSB_TESTMODE, 0);
@@ -1078,7 +1091,7 @@
 	/* stop IRQs, timers, ... */
 	musb_platform_disable(musb);
 	musb_generic_disable(musb);
-	dev_dbg(musb->controller, "HDRC disabled\n");
+	musb_dbg(musb, "HDRC disabled");
 
 	/* FIXME
 	 *  - mark host and/or peripheral drivers unusable/inactive
@@ -1391,7 +1404,7 @@
 	void __iomem *mbase = musb->mregs;
 	int ret = 0;
 
-	dev_dbg(musb->controller, "<== static silicon ep config\n");
+	musb_dbg(musb, "<== static silicon ep config");
 
 	/* FIXME pick up ep0 maxpacket size */
 
@@ -1532,8 +1545,7 @@
 		hw_ep->tx_reinit = 1;
 
 		if (hw_ep->max_packet_sz_tx) {
-			dev_dbg(musb->controller,
-				"%s: hw_ep %d%s, %smax %d\n",
+			musb_dbg(musb, "%s: hw_ep %d%s, %smax %d",
 				musb_driver_name, i,
 				hw_ep->is_shared_fifo ? "shared" : "tx",
 				hw_ep->tx_double_buffered
@@ -1541,8 +1553,7 @@
 				hw_ep->max_packet_sz_tx);
 		}
 		if (hw_ep->max_packet_sz_rx && !hw_ep->is_shared_fifo) {
-			dev_dbg(musb->controller,
-				"%s: hw_ep %d%s, %smax %d\n",
+			musb_dbg(musb, "%s: hw_ep %d%s, %smax %d",
 				musb_driver_name, i,
 				"rx",
 				hw_ep->rx_double_buffered
@@ -1550,7 +1561,7 @@
 				hw_ep->max_packet_sz_rx);
 		}
 		if (!(hw_ep->max_packet_sz_tx || hw_ep->max_packet_sz_rx))
-			dev_dbg(musb->controller, "hw_ep %d not configured\n", i);
+			musb_dbg(musb, "hw_ep %d not configured", i);
 	}
 
 	return 0;
@@ -1577,9 +1588,7 @@
 
 	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
 
-	dev_dbg(musb->controller, "** IRQ %s usb%04x tx%04x rx%04x\n",
-		is_host_active(musb) ? "host" : "peripheral",
-		musb->int_usb, musb->int_tx, musb->int_rx);
+	trace_musb_isr(musb);
 
 	/**
 	 * According to Mentor Graphics' documentation, flowchart on page 98,
@@ -1976,7 +1985,7 @@
 	 * Fail when the board needs a feature that's not enabled.
 	 */
 	if (!plat) {
-		dev_dbg(dev, "no platform_data?\n");
+		dev_err(dev, "no platform_data?\n");
 		status = -ENODEV;
 		goto fail0;
 	}
diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c
index e499b86..d4d7c56 100644
--- a/drivers/usb/musb/musb_cppi41.c
+++ b/drivers/usb/musb/musb_cppi41.c
@@ -5,7 +5,9 @@
 #include <linux/platform_device.h>
 #include <linux/of.h>
 
+#include "cppi_dma.h"
 #include "musb_core.h"
+#include "musb_trace.h"
 
 #define RNDIS_REG(x) (0x80 + ((x - 1) * 4))
 
@@ -22,26 +24,6 @@
 #define USB_CTRL_AUTOREQ	0xd0
 #define USB_TDOWN		0xd8
 
-struct cppi41_dma_channel {
-	struct dma_channel channel;
-	struct cppi41_dma_controller *controller;
-	struct musb_hw_ep *hw_ep;
-	struct dma_chan *dc;
-	dma_cookie_t cookie;
-	u8 port_num;
-	u8 is_tx;
-	u8 is_allocated;
-	u8 usb_toggle;
-
-	dma_addr_t buf_addr;
-	u32 total_len;
-	u32 prog_len;
-	u32 transferred;
-	u32 packet_sz;
-	struct list_head tx_check;
-	int tx_zlp;
-};
-
 #define MUSB_DMA_NUM_CHANNELS 15
 
 struct cppi41_dma_controller {
@@ -96,8 +78,8 @@
 	if (!toggle && toggle == cppi41_channel->usb_toggle) {
 		csr |= MUSB_RXCSR_H_DATATOGGLE | MUSB_RXCSR_H_WR_DATATOGGLE;
 		musb_writew(cppi41_channel->hw_ep->regs, MUSB_RXCSR, csr);
-		dev_dbg(cppi41_channel->controller->musb->controller,
-				"Restoring DATA1 toggle.\n");
+		musb_dbg(cppi41_channel->controller->musb,
+				"Restoring DATA1 toggle.");
 	}
 
 	cppi41_channel->usb_toggle = toggle;
@@ -145,6 +127,8 @@
 			csr = MUSB_TXCSR_MODE | MUSB_TXCSR_TXPKTRDY;
 			musb_writew(epio, MUSB_TXCSR, csr);
 		}
+
+		trace_musb_cppi41_done(cppi41_channel);
 		musb_dma_completion(musb, hw_ep->epnum, cppi41_channel->is_tx);
 	} else {
 		/* next iteration, reload */
@@ -173,6 +157,7 @@
 		dma_desc->callback = cppi41_dma_callback;
 		dma_desc->callback_param = &cppi41_channel->channel;
 		cppi41_channel->cookie = dma_desc->tx_submit(dma_desc);
+		trace_musb_cppi41_cont(cppi41_channel);
 		dma_async_issue_pending(dc);
 
 		if (!cppi41_channel->is_tx) {
@@ -240,10 +225,7 @@
 	transferred = cppi41_channel->prog_len - txstate.residue;
 	cppi41_channel->transferred += transferred;
 
-	dev_dbg(musb->controller, "DMA transfer done on hw_ep=%d bytes=%d/%d\n",
-		hw_ep->epnum, cppi41_channel->transferred,
-		cppi41_channel->total_len);
-
+	trace_musb_cppi41_gb(cppi41_channel);
 	update_rx_toggle(cppi41_channel);
 
 	if (cppi41_channel->transferred == cppi41_channel->total_len ||
@@ -374,12 +356,6 @@
 	struct musb *musb = cppi41_channel->controller->musb;
 	unsigned use_gen_rndis = 0;
 
-	dev_dbg(musb->controller,
-		"configure ep%d/%x packet_sz=%d, mode=%d, dma_addr=0x%llx, len=%d is_tx=%d\n",
-		cppi41_channel->port_num, RNDIS_REG(cppi41_channel->port_num),
-		packet_sz, mode, (unsigned long long) dma_addr,
-		len, cppi41_channel->is_tx);
-
 	cppi41_channel->buf_addr = dma_addr;
 	cppi41_channel->total_len = len;
 	cppi41_channel->transferred = 0;
@@ -431,6 +407,8 @@
 	cppi41_channel->cookie = dma_desc->tx_submit(dma_desc);
 	cppi41_channel->channel.rx_packet_done = false;
 
+	trace_musb_cppi41_config(cppi41_channel);
+
 	save_rx_toggle(cppi41_channel);
 	dma_async_issue_pending(dc);
 	return true;
@@ -461,6 +439,7 @@
 	cppi41_channel->hw_ep = hw_ep;
 	cppi41_channel->is_allocated = 1;
 
+	trace_musb_cppi41_alloc(cppi41_channel);
 	return &cppi41_channel->channel;
 }
 
@@ -468,6 +447,7 @@
 {
 	struct cppi41_dma_channel *cppi41_channel = channel->private_data;
 
+	trace_musb_cppi41_free(cppi41_channel);
 	if (cppi41_channel->is_allocated) {
 		cppi41_channel->is_allocated = 0;
 		channel->status = MUSB_DMA_STATUS_FREE;
@@ -537,8 +517,7 @@
 	u16 csr;
 
 	is_tx = cppi41_channel->is_tx;
-	dev_dbg(musb->controller, "abort channel=%d, is_tx=%d\n",
-			cppi41_channel->port_num, is_tx);
+	trace_musb_cppi41_abort(cppi41_channel);
 
 	if (cppi41_channel->channel.status == MUSB_DMA_STATUS_FREE)
 		return 0;
diff --git a/drivers/usb/musb/musb_debug.h b/drivers/usb/musb/musb_debug.h
index 27ba8f7..9a78877 100644
--- a/drivers/usb/musb/musb_debug.h
+++ b/drivers/usb/musb/musb_debug.h
@@ -42,6 +42,8 @@
 #define INFO(fmt, args...) yprintk(KERN_INFO, fmt, ## args)
 #define ERR(fmt, args...) yprintk(KERN_ERR, fmt, ## args)
 
+void musb_dbg(struct musb *musb, const char *fmt, ...);
+
 #ifdef CONFIG_DEBUG_FS
 int musb_init_debugfs(struct musb *musb);
 void musb_exit_debugfs(struct musb *musb);
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index eeb7d9e..2537179 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -52,30 +52,6 @@
 static const struct of_device_id musb_dsps_of_match[];
 
 /**
- * avoid using musb_readx()/musb_writex() as glue layer should not be
- * dependent on musb core layer symbols.
- */
-static inline u8 dsps_readb(const void __iomem *addr, unsigned offset)
-{
-	return __raw_readb(addr + offset);
-}
-
-static inline u32 dsps_readl(const void __iomem *addr, unsigned offset)
-{
-	return __raw_readl(addr + offset);
-}
-
-static inline void dsps_writeb(void __iomem *addr, unsigned offset, u8 data)
-{
-	__raw_writeb(data, addr + offset);
-}
-
-static inline void dsps_writel(void __iomem *addr, unsigned offset, u32 data)
-{
-	__raw_writel(data, addr + offset);
-}
-
-/**
  * DSPS musb wrapper register offset.
  * FIXME: This should be expanded to have all the wrapper registers from TI DSPS
  * musb ips.
@@ -223,8 +199,8 @@
 	       ((musb->epmask & wrp->rxep_mask) << wrp->rxep_shift);
 	coremask = (wrp->usb_bitmap & ~MUSB_INTR_SOF);
 
-	dsps_writel(reg_base, wrp->epintr_set, epmask);
-	dsps_writel(reg_base, wrp->coreintr_set, coremask);
+	musb_writel(reg_base, wrp->epintr_set, epmask);
+	musb_writel(reg_base, wrp->coreintr_set, coremask);
 	/* start polling for ID change in dual-role idle mode */
 	if (musb->xceiv->otg->state == OTG_STATE_B_IDLE &&
 			musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
@@ -244,10 +220,10 @@
 	const struct dsps_musb_wrapper *wrp = glue->wrp;
 	void __iomem *reg_base = musb->ctrl_base;
 
-	dsps_writel(reg_base, wrp->coreintr_clear, wrp->usb_bitmap);
-	dsps_writel(reg_base, wrp->epintr_clear,
+	musb_writel(reg_base, wrp->coreintr_clear, wrp->usb_bitmap);
+	musb_writel(reg_base, wrp->epintr_clear,
 			 wrp->txep_bitmap | wrp->rxep_bitmap);
-	dsps_writeb(musb->mregs, MUSB_DEVCTL, 0);
+	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
 }
 
 static void otg_timer(unsigned long _musb)
@@ -265,14 +241,14 @@
 	 * We poll because DSPS IP's won't expose several OTG-critical
 	 * status change events (from the transceiver) otherwise.
 	 */
-	devctl = dsps_readb(mregs, MUSB_DEVCTL);
+	devctl = musb_readb(mregs, MUSB_DEVCTL);
 	dev_dbg(musb->controller, "Poll devctl %02x (%s)\n", devctl,
 				usb_otg_state_string(musb->xceiv->otg->state));
 
 	spin_lock_irqsave(&musb->lock, flags);
 	switch (musb->xceiv->otg->state) {
 	case OTG_STATE_A_WAIT_BCON:
-		dsps_writeb(musb->mregs, MUSB_DEVCTL, 0);
+		musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
 		skip_session = 1;
 		/* fall */
 
@@ -286,13 +262,13 @@
 			MUSB_HST_MODE(musb);
 		}
 		if (!(devctl & MUSB_DEVCTL_SESSION) && !skip_session)
-			dsps_writeb(mregs, MUSB_DEVCTL, MUSB_DEVCTL_SESSION);
+			musb_writeb(mregs, MUSB_DEVCTL, MUSB_DEVCTL_SESSION);
 		mod_timer(&glue->timer, jiffies +
 				msecs_to_jiffies(wrp->poll_timeout));
 		break;
 	case OTG_STATE_A_WAIT_VFALL:
 		musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
-		dsps_writel(musb->ctrl_base, wrp->coreintr_set,
+		musb_writel(musb->ctrl_base, wrp->coreintr_set,
 			    MUSB_INTR_VBUSERROR << wrp->usb_shift);
 		break;
 	default:
@@ -315,29 +291,29 @@
 	spin_lock_irqsave(&musb->lock, flags);
 
 	/* Get endpoint interrupts */
-	epintr = dsps_readl(reg_base, wrp->epintr_status);
+	epintr = musb_readl(reg_base, wrp->epintr_status);
 	musb->int_rx = (epintr & wrp->rxep_bitmap) >> wrp->rxep_shift;
 	musb->int_tx = (epintr & wrp->txep_bitmap) >> wrp->txep_shift;
 
 	if (epintr)
-		dsps_writel(reg_base, wrp->epintr_status, epintr);
+		musb_writel(reg_base, wrp->epintr_status, epintr);
 
 	/* Get usb core interrupts */
-	usbintr = dsps_readl(reg_base, wrp->coreintr_status);
+	usbintr = musb_readl(reg_base, wrp->coreintr_status);
 	if (!usbintr && !epintr)
 		goto out;
 
 	musb->int_usb =	(usbintr & wrp->usb_bitmap) >> wrp->usb_shift;
 	if (usbintr)
-		dsps_writel(reg_base, wrp->coreintr_status, usbintr);
+		musb_writel(reg_base, wrp->coreintr_status, usbintr);
 
 	dev_dbg(musb->controller, "usbintr (%x) epintr(%x)\n",
 			usbintr, epintr);
 
 	if (usbintr & ((1 << wrp->drvvbus) << wrp->usb_shift)) {
-		int drvvbus = dsps_readl(reg_base, wrp->status);
+		int drvvbus = musb_readl(reg_base, wrp->status);
 		void __iomem *mregs = musb->mregs;
-		u8 devctl = dsps_readb(mregs, MUSB_DEVCTL);
+		u8 devctl = musb_readb(mregs, MUSB_DEVCTL);
 		int err;
 
 		err = musb->int_usb & MUSB_INTR_VBUSERROR;
@@ -442,7 +418,7 @@
 	musb->phy = devm_phy_get(dev->parent, "usb2-phy");
 
 	/* Returns zero if e.g. not clocked */
-	rev = dsps_readl(reg_base, wrp->revision);
+	rev = musb_readl(reg_base, wrp->revision);
 	if (!rev)
 		return -ENODEV;
 
@@ -463,14 +439,14 @@
 	setup_timer(&glue->timer, otg_timer, (unsigned long) musb);
 
 	/* Reset the musb */
-	dsps_writel(reg_base, wrp->control, (1 << wrp->reset));
+	musb_writel(reg_base, wrp->control, (1 << wrp->reset));
 
 	musb->isr = dsps_interrupt;
 
 	/* reset the otgdisable bit, needed for host mode to work */
-	val = dsps_readl(reg_base, wrp->phy_utmi);
+	val = musb_readl(reg_base, wrp->phy_utmi);
 	val &= ~(1 << wrp->otg_disable);
-	dsps_writel(musb->ctrl_base, wrp->phy_utmi, val);
+	musb_writel(musb->ctrl_base, wrp->phy_utmi, val);
 
 	/*
 	 *  Check whether the dsps version has babble control enabled.
@@ -478,11 +454,11 @@
 	 * If MUSB_BABBLE_CTL returns 0x4 then we have the babble control
 	 * logic enabled.
 	 */
-	val = dsps_readb(musb->mregs, MUSB_BABBLE_CTL);
+	val = musb_readb(musb->mregs, MUSB_BABBLE_CTL);
 	if (val & MUSB_BABBLE_RCV_DISABLE) {
 		glue->sw_babble_enabled = true;
 		val |= MUSB_BABBLE_SW_SESSION_CTRL;
-		dsps_writeb(musb->mregs, MUSB_BABBLE_CTL, val);
+		musb_writeb(musb->mregs, MUSB_BABBLE_CTL, val);
 	}
 
 	return dsps_musb_dbg_init(musb, glue);
@@ -510,7 +486,7 @@
 	void __iomem *ctrl_base = musb->ctrl_base;
 	u32 reg;
 
-	reg = dsps_readl(ctrl_base, wrp->mode);
+	reg = musb_readl(ctrl_base, wrp->mode);
 
 	switch (mode) {
 	case MUSB_HOST:
@@ -523,8 +499,8 @@
 		 */
 		reg |= (1 << wrp->iddig_mux);
 
-		dsps_writel(ctrl_base, wrp->mode, reg);
-		dsps_writel(ctrl_base, wrp->phy_utmi, 0x02);
+		musb_writel(ctrl_base, wrp->mode, reg);
+		musb_writel(ctrl_base, wrp->phy_utmi, 0x02);
 		break;
 	case MUSB_PERIPHERAL:
 		reg |= (1 << wrp->iddig);
@@ -536,10 +512,10 @@
 		 */
 		reg |= (1 << wrp->iddig_mux);
 
-		dsps_writel(ctrl_base, wrp->mode, reg);
+		musb_writel(ctrl_base, wrp->mode, reg);
 		break;
 	case MUSB_OTG:
-		dsps_writel(ctrl_base, wrp->phy_utmi, 0x02);
+		musb_writel(ctrl_base, wrp->phy_utmi, 0x02);
 		break;
 	default:
 		dev_err(glue->dev, "unsupported mode %d\n", mode);
@@ -554,7 +530,7 @@
 	u8 babble_ctl;
 	bool session_restart =  false;
 
-	babble_ctl = dsps_readb(musb->mregs, MUSB_BABBLE_CTL);
+	babble_ctl = musb_readb(musb->mregs, MUSB_BABBLE_CTL);
 	dev_dbg(musb->controller, "babble: MUSB_BABBLE_CTL value %x\n",
 		babble_ctl);
 	/*
@@ -571,14 +547,14 @@
 		 * babble is due to noise, then set transmit idle (d7 bit)
 		 * to resume normal operation
 		 */
-		babble_ctl = dsps_readb(musb->mregs, MUSB_BABBLE_CTL);
+		babble_ctl = musb_readb(musb->mregs, MUSB_BABBLE_CTL);
 		babble_ctl |= MUSB_BABBLE_FORCE_TXIDLE;
-		dsps_writeb(musb->mregs, MUSB_BABBLE_CTL, babble_ctl);
+		musb_writeb(musb->mregs, MUSB_BABBLE_CTL, babble_ctl);
 
 		/* wait till line monitor flag cleared */
 		dev_dbg(musb->controller, "Set TXIDLE, wait J to clear\n");
 		do {
-			babble_ctl = dsps_readb(musb->mregs, MUSB_BABBLE_CTL);
+			babble_ctl = musb_readb(musb->mregs, MUSB_BABBLE_CTL);
 			udelay(1);
 		} while ((babble_ctl & MUSB_BABBLE_STUCK_J) && timeout--);
 
@@ -896,13 +872,13 @@
 		return 0;
 
 	mbase = musb->ctrl_base;
-	glue->context.control = dsps_readl(mbase, wrp->control);
-	glue->context.epintr = dsps_readl(mbase, wrp->epintr_set);
-	glue->context.coreintr = dsps_readl(mbase, wrp->coreintr_set);
-	glue->context.phy_utmi = dsps_readl(mbase, wrp->phy_utmi);
-	glue->context.mode = dsps_readl(mbase, wrp->mode);
-	glue->context.tx_mode = dsps_readl(mbase, wrp->tx_mode);
-	glue->context.rx_mode = dsps_readl(mbase, wrp->rx_mode);
+	glue->context.control = musb_readl(mbase, wrp->control);
+	glue->context.epintr = musb_readl(mbase, wrp->epintr_set);
+	glue->context.coreintr = musb_readl(mbase, wrp->coreintr_set);
+	glue->context.phy_utmi = musb_readl(mbase, wrp->phy_utmi);
+	glue->context.mode = musb_readl(mbase, wrp->mode);
+	glue->context.tx_mode = musb_readl(mbase, wrp->tx_mode);
+	glue->context.rx_mode = musb_readl(mbase, wrp->rx_mode);
 
 	return 0;
 }
@@ -918,13 +894,13 @@
 		return 0;
 
 	mbase = musb->ctrl_base;
-	dsps_writel(mbase, wrp->control, glue->context.control);
-	dsps_writel(mbase, wrp->epintr_set, glue->context.epintr);
-	dsps_writel(mbase, wrp->coreintr_set, glue->context.coreintr);
-	dsps_writel(mbase, wrp->phy_utmi, glue->context.phy_utmi);
-	dsps_writel(mbase, wrp->mode, glue->context.mode);
-	dsps_writel(mbase, wrp->tx_mode, glue->context.tx_mode);
-	dsps_writel(mbase, wrp->rx_mode, glue->context.rx_mode);
+	musb_writel(mbase, wrp->control, glue->context.control);
+	musb_writel(mbase, wrp->epintr_set, glue->context.epintr);
+	musb_writel(mbase, wrp->coreintr_set, glue->context.coreintr);
+	musb_writel(mbase, wrp->phy_utmi, glue->context.phy_utmi);
+	musb_writel(mbase, wrp->mode, glue->context.mode);
+	musb_writel(mbase, wrp->tx_mode, glue->context.tx_mode);
+	musb_writel(mbase, wrp->rx_mode, glue->context.rx_mode);
 	if (musb->xceiv->otg->state == OTG_STATE_B_IDLE &&
 	    musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
 		mod_timer(&glue->timer, jiffies +
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index af2a3a7..6d1e975 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -44,6 +44,7 @@
 #include <linux/slab.h>
 
 #include "musb_core.h"
+#include "musb_trace.h"
 
 
 /* ----------------------------------------------------------------------- */
@@ -167,15 +168,7 @@
 	if (!dma_mapping_error(&musb->g.dev, request->dma))
 		unmap_dma_buffer(req, musb);
 
-	if (request->status == 0)
-		dev_dbg(musb->controller, "%s done request %p,  %d/%d\n",
-				ep->end_point.name, request,
-				req->request.actual, req->request.length);
-	else
-		dev_dbg(musb->controller, "%s request %p, %d/%d fault %d\n",
-				ep->end_point.name, request,
-				req->request.actual, req->request.length,
-				request->status);
+	trace_musb_req_gb(req);
 	usb_gadget_giveback_request(&req->ep->end_point, &req->request);
 	spin_lock(&musb->lock);
 	ep->busy = busy;
@@ -217,8 +210,7 @@
 		}
 
 		value = c->channel_abort(ep->dma);
-		dev_dbg(musb->controller, "%s: abort DMA --> %d\n",
-				ep->name, value);
+		musb_dbg(musb, "%s: abort DMA --> %d", ep->name, value);
 		c->channel_release(ep->dma);
 		ep->dma = NULL;
 	}
@@ -266,14 +258,14 @@
 
 	/* Check if EP is disabled */
 	if (!musb_ep->desc) {
-		dev_dbg(musb->controller, "ep:%s disabled - ignore request\n",
+		musb_dbg(musb, "ep:%s disabled - ignore request",
 						musb_ep->end_point.name);
 		return;
 	}
 
 	/* we shouldn't get here while DMA is active ... but we do ... */
 	if (dma_channel_status(musb_ep->dma) == MUSB_DMA_STATUS_BUSY) {
-		dev_dbg(musb->controller, "dma pending...\n");
+		musb_dbg(musb, "dma pending...");
 		return;
 	}
 
@@ -285,18 +277,18 @@
 			(int)(request->length - request->actual));
 
 	if (csr & MUSB_TXCSR_TXPKTRDY) {
-		dev_dbg(musb->controller, "%s old packet still ready , txcsr %03x\n",
+		musb_dbg(musb, "%s old packet still ready , txcsr %03x",
 				musb_ep->end_point.name, csr);
 		return;
 	}
 
 	if (csr & MUSB_TXCSR_P_SENDSTALL) {
-		dev_dbg(musb->controller, "%s stalling, txcsr %03x\n",
+		musb_dbg(musb, "%s stalling, txcsr %03x",
 				musb_ep->end_point.name, csr);
 		return;
 	}
 
-	dev_dbg(musb->controller, "hw_ep%d, maxpacket %d, fifo count %d, txcsr %03x\n",
+	musb_dbg(musb, "hw_ep%d, maxpacket %d, fifo count %d, txcsr %03x",
 			epnum, musb_ep->packet_sz, fifo_count,
 			csr);
 
@@ -424,7 +416,7 @@
 	}
 
 	/* host may already have the data when this message shows... */
-	dev_dbg(musb->controller, "%s TX/IN %s len %d/%d, txcsr %04x, fifo %d/%d\n",
+	musb_dbg(musb, "%s TX/IN %s len %d/%d, txcsr %04x, fifo %d/%d",
 			musb_ep->end_point.name, use_dma ? "dma" : "pio",
 			request->actual, request->length,
 			musb_readw(epio, MUSB_TXCSR),
@@ -450,8 +442,9 @@
 	req = next_request(musb_ep);
 	request = &req->request;
 
+	trace_musb_req_tx(req);
 	csr = musb_readw(epio, MUSB_TXCSR);
-	dev_dbg(musb->controller, "<== %s, txcsr %04x\n", musb_ep->end_point.name, csr);
+	musb_dbg(musb, "<== %s, txcsr %04x", musb_ep->end_point.name, csr);
 
 	dma = is_dma_capable() ? musb_ep->dma : NULL;
 
@@ -480,7 +473,7 @@
 		 * SHOULD NOT HAPPEN... has with CPPI though, after
 		 * changing SENDSTALL (and other cases); harmless?
 		 */
-		dev_dbg(musb->controller, "%s dma still busy?\n", musb_ep->end_point.name);
+		musb_dbg(musb, "%s dma still busy?", musb_ep->end_point.name);
 		return;
 	}
 
@@ -497,7 +490,7 @@
 			/* Ensure writebuffer is empty. */
 			csr = musb_readw(epio, MUSB_TXCSR);
 			request->actual += musb_ep->dma->actual_len;
-			dev_dbg(musb->controller, "TXCSR%d %04x, DMA off, len %zu, req %p\n",
+			musb_dbg(musb, "TXCSR%d %04x, DMA off, len %zu, req %p",
 				epnum, csr, musb_ep->dma->actual_len, request);
 		}
 
@@ -524,7 +517,6 @@
 			if (csr & MUSB_TXCSR_TXPKTRDY)
 				return;
 
-			dev_dbg(musb->controller, "sending zero pkt\n");
 			musb_writew(epio, MUSB_TXCSR, MUSB_TXCSR_MODE
 					| MUSB_TXCSR_TXPKTRDY);
 			request->zero = 0;
@@ -543,7 +535,7 @@
 			musb_ep_select(mbase, epnum);
 			req = musb_ep->desc ? next_request(musb_ep) : NULL;
 			if (!req) {
-				dev_dbg(musb->controller, "%s idle now\n",
+				musb_dbg(musb, "%s idle now",
 					musb_ep->end_point.name);
 				return;
 			}
@@ -579,19 +571,19 @@
 
 	/* Check if EP is disabled */
 	if (!musb_ep->desc) {
-		dev_dbg(musb->controller, "ep:%s disabled - ignore request\n",
+		musb_dbg(musb, "ep:%s disabled - ignore request",
 						musb_ep->end_point.name);
 		return;
 	}
 
 	/* We shouldn't get here while DMA is active, but we do... */
 	if (dma_channel_status(musb_ep->dma) == MUSB_DMA_STATUS_BUSY) {
-		dev_dbg(musb->controller, "DMA pending...\n");
+		musb_dbg(musb, "DMA pending...");
 		return;
 	}
 
 	if (csr & MUSB_RXCSR_P_SENDSTALL) {
-		dev_dbg(musb->controller, "%s stalling, RXCSR %04x\n",
+		musb_dbg(musb, "%s stalling, RXCSR %04x",
 		    musb_ep->end_point.name, csr);
 		return;
 	}
@@ -766,7 +758,7 @@
 			}
 
 			len = request->length - request->actual;
-			dev_dbg(musb->controller, "%s OUT/RX pio fifo %d/%d, maxpacket %d\n",
+			musb_dbg(musb, "%s OUT/RX pio fifo %d/%d, maxpacket %d",
 					musb_ep->end_point.name,
 					fifo_count, len,
 					musb_ep->packet_sz);
@@ -849,12 +841,13 @@
 	if (!req)
 		return;
 
+	trace_musb_req_rx(req);
 	request = &req->request;
 
 	csr = musb_readw(epio, MUSB_RXCSR);
 	dma = is_dma_capable() ? musb_ep->dma : NULL;
 
-	dev_dbg(musb->controller, "<== %s, rxcsr %04x%s %p\n", musb_ep->end_point.name,
+	musb_dbg(musb, "<== %s, rxcsr %04x%s %p", musb_ep->end_point.name,
 			csr, dma ? " (dma)" : "", request);
 
 	if (csr & MUSB_RXCSR_P_SENTSTALL) {
@@ -869,18 +862,18 @@
 		csr &= ~MUSB_RXCSR_P_OVERRUN;
 		musb_writew(epio, MUSB_RXCSR, csr);
 
-		dev_dbg(musb->controller, "%s iso overrun on %p\n", musb_ep->name, request);
+		musb_dbg(musb, "%s iso overrun on %p", musb_ep->name, request);
 		if (request->status == -EINPROGRESS)
 			request->status = -EOVERFLOW;
 	}
 	if (csr & MUSB_RXCSR_INCOMPRX) {
 		/* REVISIT not necessarily an error */
-		dev_dbg(musb->controller, "%s, incomprx\n", musb_ep->end_point.name);
+		musb_dbg(musb, "%s, incomprx", musb_ep->end_point.name);
 	}
 
 	if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
 		/* "should not happen"; likely RXPKTRDY pending for DMA */
-		dev_dbg(musb->controller, "%s busy, csr %04x\n",
+		musb_dbg(musb, "%s busy, csr %04x",
 			musb_ep->end_point.name, csr);
 		return;
 	}
@@ -894,11 +887,6 @@
 
 		request->actual += musb_ep->dma->actual_len;
 
-		dev_dbg(musb->controller, "RXCSR%d %04x, dma off, %04x, len %zu, req %p\n",
-			epnum, csr,
-			musb_readw(epio, MUSB_RXCSR),
-			musb_ep->dma->actual_len, request);
-
 #if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_TUSB_OMAP_DMA) || \
 	defined(CONFIG_USB_UX500_DMA)
 		/* Autoclear doesn't clear RxPktRdy for short packets */
@@ -996,7 +984,7 @@
 			ok = musb->hb_iso_rx;
 
 		if (!ok) {
-			dev_dbg(musb->controller, "no support for high bandwidth ISO\n");
+			musb_dbg(musb, "no support for high bandwidth ISO");
 			goto fail;
 		}
 		musb_ep->hb_mult = (tmp >> 11) & 3;
@@ -1019,7 +1007,7 @@
 			goto fail;
 
 		if (tmp > hw_ep->max_packet_sz_tx) {
-			dev_dbg(musb->controller, "packet size beyond hardware FIFO size\n");
+			musb_dbg(musb, "packet size beyond hardware FIFO size");
 			goto fail;
 		}
 
@@ -1062,7 +1050,7 @@
 			goto fail;
 
 		if (tmp > hw_ep->max_packet_sz_rx) {
-			dev_dbg(musb->controller, "packet size beyond hardware FIFO size\n");
+			musb_dbg(musb, "packet size beyond hardware FIFO size");
 			goto fail;
 		}
 
@@ -1174,7 +1162,7 @@
 
 	spin_unlock_irqrestore(&(musb->lock), flags);
 
-	dev_dbg(musb->controller, "%s\n", musb_ep->end_point.name);
+	musb_dbg(musb, "%s", musb_ep->end_point.name);
 
 	return status;
 }
@@ -1186,19 +1174,17 @@
 struct usb_request *musb_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
 {
 	struct musb_ep		*musb_ep = to_musb_ep(ep);
-	struct musb		*musb = musb_ep->musb;
 	struct musb_request	*request = NULL;
 
 	request = kzalloc(sizeof *request, gfp_flags);
-	if (!request) {
-		dev_dbg(musb->controller, "not enough memory\n");
+	if (!request)
 		return NULL;
-	}
 
 	request->request.dma = DMA_ADDR_INVALID;
 	request->epnum = musb_ep->current_epnum;
 	request->ep = musb_ep;
 
+	trace_musb_req_alloc(request);
 	return &request->request;
 }
 
@@ -1208,7 +1194,10 @@
  */
 void musb_free_request(struct usb_ep *ep, struct usb_request *req)
 {
-	kfree(to_musb_request(req));
+	struct musb_request *request = to_musb_request(req);
+
+	trace_musb_req_free(request);
+	kfree(request);
 }
 
 static LIST_HEAD(buffers);
@@ -1225,10 +1214,7 @@
  */
 void musb_ep_restart(struct musb *musb, struct musb_request *req)
 {
-	dev_dbg(musb->controller, "<== %s request %p len %u on hw_ep%d\n",
-		req->tx ? "TX/IN" : "RX/OUT",
-		&req->request, req->request.length, req->epnum);
-
+	trace_musb_req_start(req);
 	musb_ep_select(musb->mregs, req->epnum);
 	if (req->tx)
 		txstate(musb, req);
@@ -1259,7 +1245,7 @@
 	if (request->ep != musb_ep)
 		return -EINVAL;
 
-	dev_dbg(musb->controller, "<== to %s request=%p\n", ep->name, req);
+	trace_musb_req_enq(request);
 
 	/* request is mine now... */
 	request->request.actual = 0;
@@ -1273,7 +1259,7 @@
 
 	/* don't queue if the ep is down */
 	if (!musb_ep->desc) {
-		dev_dbg(musb->controller, "req %p queued to %s while ep %s\n",
+		musb_dbg(musb, "req %p queued to %s while ep %s",
 				req, ep->name, "disabled");
 		status = -ESHUTDOWN;
 		unmap_dma_buffer(request, musb);
@@ -1301,9 +1287,11 @@
 	int			status = 0;
 	struct musb		*musb = musb_ep->musb;
 
-	if (!ep || !request || to_musb_request(request)->ep != musb_ep)
+	if (!ep || !request || req->ep != musb_ep)
 		return -EINVAL;
 
+	trace_musb_req_deq(req);
+
 	spin_lock_irqsave(&musb->lock, flags);
 
 	list_for_each_entry(r, &musb_ep->req_list, list) {
@@ -1311,7 +1299,8 @@
 			break;
 	}
 	if (r != req) {
-		dev_dbg(musb->controller, "request %p not queued to %s\n", request, ep->name);
+		dev_err(musb->controller, "request %p not queued to %s\n",
+				request, ep->name);
 		status = -EINVAL;
 		goto done;
 	}
@@ -1377,7 +1366,7 @@
 	request = next_request(musb_ep);
 	if (value) {
 		if (request) {
-			dev_dbg(musb->controller, "request in progress, cannot halt %s\n",
+			musb_dbg(musb, "request in progress, cannot halt %s",
 			    ep->name);
 			status = -EAGAIN;
 			goto done;
@@ -1386,7 +1375,8 @@
 		if (musb_ep->is_in) {
 			csr = musb_readw(epio, MUSB_TXCSR);
 			if (csr & MUSB_TXCSR_FIFONOTEMPTY) {
-				dev_dbg(musb->controller, "FIFO busy, cannot halt %s\n", ep->name);
+				musb_dbg(musb, "FIFO busy, cannot halt %s",
+						ep->name);
 				status = -EAGAIN;
 				goto done;
 			}
@@ -1395,7 +1385,7 @@
 		musb_ep->wedged = 0;
 
 	/* set/clear the stall and toggle bits */
-	dev_dbg(musb->controller, "%s: %s stall\n", ep->name, value ? "set" : "clear");
+	musb_dbg(musb, "%s: %s stall", ep->name, value ? "set" : "clear");
 	if (musb_ep->is_in) {
 		csr = musb_readw(epio, MUSB_TXCSR);
 		csr |= MUSB_TXCSR_P_WZC_BITS
@@ -1422,7 +1412,7 @@
 
 	/* maybe start the first request in the queue */
 	if (!musb_ep->busy && !value && request) {
-		dev_dbg(musb->controller, "restarting the request\n");
+		musb_dbg(musb, "restarting the request");
 		musb_ep_restart(musb, request);
 	}
 
@@ -1558,7 +1548,7 @@
 	case OTG_STATE_B_IDLE:
 		/* Start SRP ... OTG not required. */
 		devctl = musb_readb(mregs, MUSB_DEVCTL);
-		dev_dbg(musb->controller, "Sending SRP: devctl: %02x\n", devctl);
+		musb_dbg(musb, "Sending SRP: devctl: %02x", devctl);
 		devctl |= MUSB_DEVCTL_SESSION;
 		musb_writeb(mregs, MUSB_DEVCTL, devctl);
 		devctl = musb_readb(mregs, MUSB_DEVCTL);
@@ -1586,7 +1576,7 @@
 		status = 0;
 		goto done;
 	default:
-		dev_dbg(musb->controller, "Unhandled wake: %s\n",
+		musb_dbg(musb, "Unhandled wake: %s",
 			usb_otg_state_string(musb->xceiv->otg->state));
 		goto done;
 	}
@@ -1596,7 +1586,7 @@
 	power = musb_readb(mregs, MUSB_POWER);
 	power |= MUSB_POWER_RESUME;
 	musb_writeb(mregs, MUSB_POWER, power);
-	dev_dbg(musb->controller, "issue wakeup\n");
+	musb_dbg(musb, "issue wakeup");
 
 	/* FIXME do this next chunk in a timer callback, no udelay */
 	mdelay(2);
@@ -1628,7 +1618,7 @@
 
 	/* FIXME if on, HdrcStart; if off, HdrcStop */
 
-	dev_dbg(musb->controller, "gadget D+ pullup %s\n",
+	musb_dbg(musb, "gadget D+ pullup %s",
 		is_on ? "on" : "off");
 	musb_writeb(musb->mregs, MUSB_POWER, power);
 }
@@ -1636,7 +1626,7 @@
 #if 0
 static int musb_gadget_vbus_session(struct usb_gadget *gadget, int is_active)
 {
-	dev_dbg(musb->controller, "<= %s =>\n", __func__);
+	musb_dbg(musb, "<= %s =>\n", __func__);
 
 	/*
 	 * FIXME iff driver's softconnect flag is set (as it is during probe,
@@ -2011,7 +2001,7 @@
 	u8	devctl;
 
 	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
-	dev_dbg(musb->controller, "devctl %02x\n", devctl);
+	musb_dbg(musb, "musb_g_suspend: devctl %02x", devctl);
 
 	switch (musb->xceiv->otg->state) {
 	case OTG_STATE_B_IDLE:
@@ -2030,7 +2020,7 @@
 		/* REVISIT if B_HOST, clear DEVCTL.HOSTREQ;
 		 * A_PERIPHERAL may need care too
 		 */
-		WARNING("unhandled SUSPEND transition (%s)\n",
+		WARNING("unhandled SUSPEND transition (%s)",
 				usb_otg_state_string(musb->xceiv->otg->state));
 	}
 }
@@ -2047,7 +2037,7 @@
 	void __iomem	*mregs = musb->mregs;
 	u8	devctl = musb_readb(mregs, MUSB_DEVCTL);
 
-	dev_dbg(musb->controller, "devctl %02x\n", devctl);
+	musb_dbg(musb, "musb_g_disconnect: devctl %02x", devctl);
 
 	/* clear HR */
 	musb_writeb(mregs, MUSB_DEVCTL, devctl & MUSB_DEVCTL_SESSION);
@@ -2064,7 +2054,7 @@
 
 	switch (musb->xceiv->otg->state) {
 	default:
-		dev_dbg(musb->controller, "Unhandled disconnect %s, setting a_idle\n",
+		musb_dbg(musb, "Unhandled disconnect %s, setting a_idle",
 			usb_otg_state_string(musb->xceiv->otg->state));
 		musb->xceiv->otg->state = OTG_STATE_A_IDLE;
 		MUSB_HST_MODE(musb);
@@ -2094,7 +2084,7 @@
 	u8		devctl = musb_readb(mbase, MUSB_DEVCTL);
 	u8		power;
 
-	dev_dbg(musb->controller, "<== %s driver '%s'\n",
+	musb_dbg(musb, "<== %s driver '%s'",
 			(devctl & MUSB_DEVCTL_BDEVICE)
 				? "B-Device" : "A-Device",
 			musb->gadget_driver
diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c
index 10d30af..844a309 100644
--- a/drivers/usb/musb/musb_gadget_ep0.c
+++ b/drivers/usb/musb/musb_gadget_ep0.c
@@ -206,7 +206,7 @@
 	void __iomem	*mbase = musb->mregs;
 	u8		devctl;
 
-	dev_dbg(musb->controller, "HNP: Setting HR\n");
+	musb_dbg(musb, "HNP: Setting HR");
 	devctl = musb_readb(mbase, MUSB_DEVCTL);
 	musb_writeb(mbase, MUSB_DEVCTL, devctl | MUSB_DEVCTL_HR);
 }
@@ -303,7 +303,7 @@
 				/* Maybe start the first request in the queue */
 				request = next_request(musb_ep);
 				if (!musb_ep->busy && request) {
-					dev_dbg(musb->controller, "restarting the request\n");
+					musb_dbg(musb, "restarting the request");
 					musb_ep_restart(musb, request);
 				}
 
@@ -550,7 +550,7 @@
 
 	if (!req) {
 		/* WARN_ON(1); */
-		dev_dbg(musb->controller, "odd; csr0 %04x\n", musb_readw(regs, MUSB_CSR0));
+		musb_dbg(musb, "odd; csr0 %04x", musb_readw(regs, MUSB_CSR0));
 		return;
 	}
 
@@ -607,7 +607,7 @@
 	/* NOTE:  earlier 2.6 versions changed setup packets to host
 	 * order, but now USB packets always stay in USB byte order.
 	 */
-	dev_dbg(musb->controller, "SETUP req%02x.%02x v%04x i%04x l%d\n",
+	musb_dbg(musb, "SETUP req%02x.%02x v%04x i%04x l%d",
 		req->bRequestType,
 		req->bRequest,
 		le16_to_cpu(req->wValue),
@@ -675,7 +675,7 @@
 	csr = musb_readw(regs, MUSB_CSR0);
 	len = musb_readb(regs, MUSB_COUNT0);
 
-	dev_dbg(musb->controller, "csr %04x, count %d, ep0stage %s\n",
+	musb_dbg(musb, "csr %04x, count %d, ep0stage %s",
 			csr, len, decode_ep0stage(musb->ep0_state));
 
 	if (csr & MUSB_CSR0_P_DATAEND) {
@@ -752,7 +752,7 @@
 
 		/* enter test mode if needed (exit by reset) */
 		else if (musb->test_mode) {
-			dev_dbg(musb->controller, "entering TESTMODE\n");
+			musb_dbg(musb, "entering TESTMODE");
 
 			if (MUSB_TEST_PACKET == musb->test_mode_nr)
 				musb_load_testpacket(musb);
@@ -864,7 +864,7 @@
 				break;
 			}
 
-			dev_dbg(musb->controller, "handled %d, csr %04x, ep0stage %s\n",
+			musb_dbg(musb, "handled %d, csr %04x, ep0stage %s",
 				handled, csr,
 				decode_ep0stage(musb->ep0_state));
 
@@ -881,7 +881,7 @@
 			if (handled < 0) {
 				musb_ep_select(mbase, 0);
 stall:
-				dev_dbg(musb->controller, "stall (%d)\n", handled);
+				musb_dbg(musb, "stall (%d)", handled);
 				musb->ackpend |= MUSB_CSR0_P_SENDSTALL;
 				musb->ep0_state = MUSB_EP0_STAGE_IDLE;
 finish:
@@ -961,7 +961,7 @@
 		status = 0;
 		break;
 	default:
-		dev_dbg(musb->controller, "ep0 request queued in state %d\n",
+		musb_dbg(musb, "ep0 request queued in state %d",
 				musb->ep0_state);
 		status = -EINVAL;
 		goto cleanup;
@@ -970,7 +970,7 @@
 	/* add request to the list */
 	list_add_tail(&req->list, &ep->req_list);
 
-	dev_dbg(musb->controller, "queue to %s (%s), length=%d\n",
+	musb_dbg(musb, "queue to %s (%s), length=%d",
 			ep->name, ep->is_in ? "IN/TX" : "OUT/RX",
 			req->request.length);
 
@@ -1063,7 +1063,7 @@
 		musb->ackpend = 0;
 		break;
 	default:
-		dev_dbg(musb->controller, "ep0 can't halt in state %d\n", musb->ep0_state);
+		musb_dbg(musb, "ep0 can't halt in state %d", musb->ep0_state);
 		status = -EINVAL;
 	}
 
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index d227a71..53bc4ce 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -44,6 +44,7 @@
 
 #include "musb_core.h"
 #include "musb_host.h"
+#include "musb_trace.h"
 
 /* MUSB HOST status 22-mar-2006
  *
@@ -131,7 +132,7 @@
 		 * I found using a usb-ethernet device and running iperf
 		 * (client on AM335x) has very high chance to trigger it.
 		 *
-		 * Better to turn on dev_dbg() in musb_cleanup_urb() with
+		 * Better to turn on musb_dbg() in musb_cleanup_urb() with
 		 * CPPI enabled to see the issue when aborting the tx channel.
 		 */
 		if (dev_WARN_ONCE(musb->controller, retries-- < 1,
@@ -225,8 +226,6 @@
 	void			*buf = urb->transfer_buffer;
 	u32			offset = 0;
 	struct musb_hw_ep	*hw_ep = qh->hw_ep;
-	unsigned		pipe = urb->pipe;
-	u8			address = usb_pipedevice(pipe);
 	int			epnum = hw_ep->epnum;
 
 	/* initialize software qh state */
@@ -254,16 +253,7 @@
 		len = urb->transfer_buffer_length - urb->actual_length;
 	}
 
-	dev_dbg(musb->controller, "qh %p urb %p dev%d ep%d%s%s, hw_ep %d, %p/%d\n",
-			qh, urb, address, qh->epnum,
-			is_in ? "in" : "out",
-			({char *s; switch (qh->type) {
-			case USB_ENDPOINT_XFER_CONTROL:	s = ""; break;
-			case USB_ENDPOINT_XFER_BULK:	s = "-bulk"; break;
-			case USB_ENDPOINT_XFER_ISOC:	s = "-iso"; break;
-			default:			s = "-intr"; break;
-			} s; }),
-			epnum, buf + offset, len);
+	trace_musb_urb_start(musb, urb);
 
 	/* Configure endpoint */
 	musb_ep_set_qh(hw_ep, is_in, qh);
@@ -277,7 +267,7 @@
 	switch (qh->type) {
 	case USB_ENDPOINT_XFER_ISOC:
 	case USB_ENDPOINT_XFER_INT:
-		dev_dbg(musb->controller, "check whether there's still time for periodic Tx\n");
+		musb_dbg(musb, "check whether there's still time for periodic Tx");
 		frame = musb_readw(mbase, MUSB_FRAME);
 		/* FIXME this doesn't implement that scheduling policy ...
 		 * or handle framecounter wrapping
@@ -291,7 +281,7 @@
 		} else {
 			qh->frame = urb->start_frame;
 			/* enable SOF interrupt so we can count down */
-			dev_dbg(musb->controller, "SOF for %d\n", epnum);
+			musb_dbg(musb, "SOF for %d", epnum);
 #if 1 /* ifndef	CONFIG_ARCH_DAVINCI */
 			musb_writeb(mbase, MUSB_INTRUSBE, 0xff);
 #endif
@@ -299,7 +289,7 @@
 		break;
 	default:
 start:
-		dev_dbg(musb->controller, "Start TX%d %s\n", epnum,
+		musb_dbg(musb, "Start TX%d %s", epnum,
 			hw_ep->tx_channel ? "dma" : "pio");
 
 		if (!hw_ep->tx_channel)
@@ -314,14 +304,7 @@
 __releases(musb->lock)
 __acquires(musb->lock)
 {
-	dev_dbg(musb->controller,
-			"complete %p %pF (%d), dev%d ep%d%s, %d/%d\n",
-			urb, urb->complete, status,
-			usb_pipedevice(urb->pipe),
-			usb_pipeendpoint(urb->pipe),
-			usb_pipein(urb->pipe) ? "in" : "out",
-			urb->actual_length, urb->transfer_buffer_length
-			);
+	trace_musb_urb_gb(musb, urb);
 
 	usb_hcd_unlink_urb_from_ep(musb->hcd, urb);
 	spin_unlock(&musb->lock);
@@ -441,7 +424,7 @@
 	 * for RX, until we have a test case to understand the behavior of TX.
 	 */
 	if ((!status || !is_in) && qh && qh->is_ready) {
-		dev_dbg(musb->controller, "... next ep%d %cX urb %p\n",
+		musb_dbg(musb, "... next ep%d %cX urb %p",
 		    hw_ep->epnum, is_in ? 'R' : 'T', next_urb(qh));
 		musb_start_urb(musb, is_in, qh);
 	}
@@ -486,7 +469,7 @@
 
 	/* musb_ep_select(mbase, epnum); */
 	rx_count = musb_readw(epio, MUSB_RXCOUNT);
-	dev_dbg(musb->controller, "RX%d count %d, buffer %p len %d/%d\n", epnum, rx_count,
+	musb_dbg(musb, "RX%d count %d, buffer %p len %d/%d", epnum, rx_count,
 			urb->transfer_buffer, qh->offset,
 			urb->transfer_buffer_length);
 
@@ -508,7 +491,7 @@
 				status = -EOVERFLOW;
 				urb->error_count++;
 			}
-			dev_dbg(musb->controller, "** OVERFLOW %d into %d\n", rx_count, length);
+			musb_dbg(musb, "OVERFLOW %d into %d", rx_count, length);
 			do_flush = 1;
 		} else
 			length = rx_count;
@@ -526,7 +509,7 @@
 		if (rx_count > length) {
 			if (urb->status == -EINPROGRESS)
 				urb->status = -EOVERFLOW;
-			dev_dbg(musb->controller, "** OVERFLOW %d into %d\n", rx_count, length);
+			musb_dbg(musb, "OVERFLOW %d into %d", rx_count, length);
 			do_flush = 1;
 		} else
 			length = rx_count;
@@ -750,8 +733,8 @@
 	u8			use_dma = 1;
 	u16			csr;
 
-	dev_dbg(musb->controller, "%s hw%d urb %p spd%d dev%d ep%d%s "
-				"h_addr%02x h_port%02x bytes %d\n",
+	musb_dbg(musb, "%s hw%d urb %p spd%d dev%d ep%d%s "
+				"h_addr%02x h_port%02x bytes %d",
 			is_out ? "-->" : "<--",
 			epnum, urb, urb->dev->speed,
 			qh->addr_reg, qh->epnum, is_out ? "out" : "in",
@@ -969,7 +952,7 @@
 		}
 
 		csr |= MUSB_RXCSR_H_REQPKT;
-		dev_dbg(musb->controller, "RXCSR%d := %04x\n", epnum, csr);
+		musb_dbg(musb, "RXCSR%d := %04x", epnum, csr);
 		musb_writew(hw_ep->regs, MUSB_RXCSR, csr);
 		csr = musb_readw(hw_ep->regs, MUSB_RXCSR);
 	}
@@ -1085,15 +1068,15 @@
 		request = (struct usb_ctrlrequest *) urb->setup_packet;
 
 		if (!request->wLength) {
-			dev_dbg(musb->controller, "start no-DATA\n");
+			musb_dbg(musb, "start no-DATA");
 			break;
 		} else if (request->bRequestType & USB_DIR_IN) {
-			dev_dbg(musb->controller, "start IN-DATA\n");
+			musb_dbg(musb, "start IN-DATA");
 			musb->ep0_stage = MUSB_EP0_IN;
 			more = true;
 			break;
 		} else {
-			dev_dbg(musb->controller, "start OUT-DATA\n");
+			musb_dbg(musb, "start OUT-DATA");
 			musb->ep0_stage = MUSB_EP0_OUT;
 			more = true;
 		}
@@ -1105,7 +1088,7 @@
 		if (fifo_count) {
 			fifo_dest = (u8 *) (urb->transfer_buffer
 					+ urb->actual_length);
-			dev_dbg(musb->controller, "Sending %d byte%s to ep0 fifo %p\n",
+			musb_dbg(musb, "Sending %d byte%s to ep0 fifo %p",
 					fifo_count,
 					(fifo_count == 1) ? "" : "s",
 					fifo_dest);
@@ -1150,7 +1133,7 @@
 			? musb_readb(epio, MUSB_COUNT0)
 			: 0;
 
-	dev_dbg(musb->controller, "<== csr0 %04x, qh %p, count %d, urb %p, stage %d\n",
+	musb_dbg(musb, "<== csr0 %04x, qh %p, count %d, urb %p, stage %d",
 		csr, qh, len, urb, musb->ep0_stage);
 
 	/* if we just did status stage, we are done */
@@ -1161,15 +1144,15 @@
 
 	/* prepare status */
 	if (csr & MUSB_CSR0_H_RXSTALL) {
-		dev_dbg(musb->controller, "STALLING ENDPOINT\n");
+		musb_dbg(musb, "STALLING ENDPOINT");
 		status = -EPIPE;
 
 	} else if (csr & MUSB_CSR0_H_ERROR) {
-		dev_dbg(musb->controller, "no response, csr0 %04x\n", csr);
+		musb_dbg(musb, "no response, csr0 %04x", csr);
 		status = -EPROTO;
 
 	} else if (csr & MUSB_CSR0_H_NAKTIMEOUT) {
-		dev_dbg(musb->controller, "control NAK timeout\n");
+		musb_dbg(musb, "control NAK timeout");
 
 		/* NOTE:  this code path would be a good place to PAUSE a
 		 * control transfer, if another one is queued, so that
@@ -1184,7 +1167,7 @@
 	}
 
 	if (status) {
-		dev_dbg(musb->controller, "aborting\n");
+		musb_dbg(musb, "aborting");
 		retval = IRQ_HANDLED;
 		if (urb)
 			urb->status = status;
@@ -1237,7 +1220,7 @@
 			/* flag status stage */
 			musb->ep0_stage = MUSB_EP0_STATUS;
 
-			dev_dbg(musb->controller, "ep0 STATUS, csr %04x\n", csr);
+			musb_dbg(musb, "ep0 STATUS, csr %04x", csr);
 
 		}
 		musb_writew(epio, MUSB_CSR0, csr);
@@ -1291,38 +1274,37 @@
 
 	/* with CPPI, DMA sometimes triggers "extra" irqs */
 	if (!urb) {
-		dev_dbg(musb->controller, "extra TX%d ready, csr %04x\n", epnum, tx_csr);
+		musb_dbg(musb, "extra TX%d ready, csr %04x", epnum, tx_csr);
 		return;
 	}
 
 	pipe = urb->pipe;
 	dma = is_dma_capable() ? hw_ep->tx_channel : NULL;
-	dev_dbg(musb->controller, "OUT/TX%d end, csr %04x%s\n", epnum, tx_csr,
+	trace_musb_urb_tx(musb, urb);
+	musb_dbg(musb, "OUT/TX%d end, csr %04x%s", epnum, tx_csr,
 			dma ? ", dma" : "");
 
 	/* check for errors */
 	if (tx_csr & MUSB_TXCSR_H_RXSTALL) {
 		/* dma was disabled, fifo flushed */
-		dev_dbg(musb->controller, "TX end %d stall\n", epnum);
+		musb_dbg(musb, "TX end %d stall", epnum);
 
 		/* stall; record URB status */
 		status = -EPIPE;
 
 	} else if (tx_csr & MUSB_TXCSR_H_ERROR) {
 		/* (NON-ISO) dma was disabled, fifo flushed */
-		dev_dbg(musb->controller, "TX 3strikes on ep=%d\n", epnum);
+		musb_dbg(musb, "TX 3strikes on ep=%d", epnum);
 
 		status = -ETIMEDOUT;
 
 	} else if (tx_csr & MUSB_TXCSR_H_NAKTIMEOUT) {
 		if (USB_ENDPOINT_XFER_BULK == qh->type && qh->mux == 1
 				&& !list_is_singular(&musb->out_bulk)) {
-			dev_dbg(musb->controller,
-				"NAK timeout on TX%d ep\n", epnum);
+			musb_dbg(musb, "NAK timeout on TX%d ep", epnum);
 			musb_bulk_nak_timeout(musb, hw_ep, 0);
 		} else {
-			dev_dbg(musb->controller,
-				"TX end=%d device not responding\n", epnum);
+			musb_dbg(musb, "TX ep%d device not responding", epnum);
 			/* NOTE:  this code path would be a good place to PAUSE a
 			 * transfer, if there's some other (nonperiodic) tx urb
 			 * that could use this fifo.  (dma complicates it...)
@@ -1368,7 +1350,7 @@
 
 	/* second cppi case */
 	if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
-		dev_dbg(musb->controller, "extra TX%d ready, csr %04x\n", epnum, tx_csr);
+		musb_dbg(musb, "extra TX%d ready, csr %04x", epnum, tx_csr);
 		return;
 	}
 
@@ -1427,8 +1409,9 @@
 		 * FIFO mode too...
 		 */
 		if (tx_csr & (MUSB_TXCSR_FIFONOTEMPTY | MUSB_TXCSR_TXPKTRDY)) {
-			dev_dbg(musb->controller, "DMA complete but packet still in FIFO, "
-			    "CSR %04x\n", tx_csr);
+			musb_dbg(musb,
+				"DMA complete but FIFO not empty, CSR %04x",
+				tx_csr);
 			return;
 		}
 	}
@@ -1494,7 +1477,7 @@
 			return;
 		}
 	} else	if (tx_csr & MUSB_TXCSR_DMAENAB) {
-		dev_dbg(musb->controller, "not complete, but DMA enabled?\n");
+		musb_dbg(musb, "not complete, but DMA enabled?");
 		return;
 	}
 
@@ -1723,7 +1706,7 @@
 				d_status = -EOVERFLOW;
 				urb->error_count++;
 			}
-			dev_dbg(musb->controller, "** OVERFLOW %d into %d\n",
+			musb_dbg(musb, "** OVERFLOW %d into %d",
 				rx_count, d->length);
 
 			length = d->length;
@@ -1847,28 +1830,26 @@
 		 * usbtest #11 (unlinks) triggers it regularly, sometimes
 		 * with fifo full.  (Only with DMA??)
 		 */
-		dev_dbg(musb->controller, "BOGUS RX%d ready, csr %04x, count %d\n", epnum, val,
-			musb_readw(epio, MUSB_RXCOUNT));
+		musb_dbg(musb, "BOGUS RX%d ready, csr %04x, count %d",
+			epnum, val, musb_readw(epio, MUSB_RXCOUNT));
 		musb_h_flush_rxfifo(hw_ep, MUSB_RXCSR_CLRDATATOG);
 		return;
 	}
 
 	pipe = urb->pipe;
 
-	dev_dbg(musb->controller, "<== hw %d rxcsr %04x, urb actual %d (+dma %zu)\n",
-		epnum, rx_csr, urb->actual_length,
-		dma ? dma->actual_len : 0);
+	trace_musb_urb_rx(musb, urb);
 
 	/* check for errors, concurrent stall & unlink is not really
 	 * handled yet! */
 	if (rx_csr & MUSB_RXCSR_H_RXSTALL) {
-		dev_dbg(musb->controller, "RX end %d STALL\n", epnum);
+		musb_dbg(musb, "RX end %d STALL", epnum);
 
 		/* stall; record URB status */
 		status = -EPIPE;
 
 	} else if (rx_csr & MUSB_RXCSR_H_ERROR) {
-		dev_dbg(musb->controller, "end %d RX proto error\n", epnum);
+		musb_dbg(musb, "end %d RX proto error", epnum);
 
 		status = -EPROTO;
 		musb_writeb(epio, MUSB_RXINTERVAL, 0);
@@ -1879,7 +1860,7 @@
 	} else if (rx_csr & MUSB_RXCSR_DATAERROR) {
 
 		if (USB_ENDPOINT_XFER_ISOC != qh->type) {
-			dev_dbg(musb->controller, "RX end %d NAK timeout\n", epnum);
+			musb_dbg(musb, "RX end %d NAK timeout", epnum);
 
 			/* NOTE: NAKing is *NOT* an error, so we want to
 			 * continue.  Except ... if there's a request for
@@ -1902,12 +1883,12 @@
 
 			goto finish;
 		} else {
-			dev_dbg(musb->controller, "RX end %d ISO data error\n", epnum);
+			musb_dbg(musb, "RX end %d ISO data error", epnum);
 			/* packet error reported later */
 			iso_err = true;
 		}
 	} else if (rx_csr & MUSB_RXCSR_INCOMPRX) {
-		dev_dbg(musb->controller, "end %d high bandwidth incomplete ISO packet RX\n",
+		musb_dbg(musb, "end %d high bandwidth incomplete ISO packet RX",
 				epnum);
 		status = -EPROTO;
 	}
@@ -1952,7 +1933,7 @@
 			done = true;
 		}
 
-		dev_dbg(musb->controller, "RXCSR%d %04x, reqpkt, len %zu%s\n", epnum, rx_csr,
+		musb_dbg(musb, "RXCSR%d %04x, reqpkt, len %zu%s", epnum, rx_csr,
 				xfer_len, dma ? ", dma" : "");
 		rx_csr &= ~MUSB_RXCSR_H_REQPKT;
 
@@ -1973,8 +1954,8 @@
 		if (musb_dma_inventra(musb) || musb_dma_ux500(musb) ||
 		    musb_dma_cppi41(musb)) {
 			    done = musb_rx_dma_inventra_cppi41(c, hw_ep, qh, urb, xfer_len);
-			    dev_dbg(hw_ep->musb->controller,
-				    "ep %d dma %s, rxcsr %04x, rxcount %d\n",
+			    musb_dbg(hw_ep->musb,
+				    "ep %d dma %s, rxcsr %04x, rxcount %d",
 				    epnum, done ? "off" : "reset",
 				    musb_readw(epio, MUSB_RXCSR),
 				    musb_readw(epio, MUSB_RXCOUNT));
@@ -2001,8 +1982,8 @@
 		/* we are expecting IN packets */
 		if ((musb_dma_inventra(musb) || musb_dma_ux500(musb) ||
 		    musb_dma_cppi41(musb)) && dma) {
-			dev_dbg(hw_ep->musb->controller,
-				"RX%d count %d, buffer 0x%llx len %d/%d\n",
+			musb_dbg(hw_ep->musb,
+				"RX%d count %d, buffer 0x%llx len %d/%d",
 				epnum, musb_readw(epio, MUSB_RXCOUNT),
 				(unsigned long long) urb->transfer_dma
 				+ urb->actual_length,
@@ -2054,7 +2035,7 @@
 				done = musb_host_packet_rx(musb, urb,
 						epnum, iso_err);
 			}
-			dev_dbg(musb->controller, "read %spacket\n", done ? "last " : "");
+			musb_dbg(musb, "read %spacket", done ? "last " : "");
 		}
 	}
 
@@ -2178,7 +2159,7 @@
 	idle = 1;
 	qh->mux = 0;
 	hw_ep = musb->endpoints + best_end;
-	dev_dbg(musb->controller, "qh %p periodic slot %d\n", qh, best_end);
+	musb_dbg(musb, "qh %p periodic slot %d", qh, best_end);
 success:
 	if (head) {
 		idle = list_empty(head);
@@ -2210,6 +2191,8 @@
 	if (!is_host_active(musb) || !musb->is_active)
 		return -ENODEV;
 
+	trace_musb_urb_enq(musb, urb);
+
 	spin_lock_irqsave(&musb->lock, flags);
 	ret = usb_hcd_link_urb_to_ep(hcd, urb);
 	qh = ret ? NULL : hep->hcpriv;
@@ -2400,8 +2383,7 @@
 		dma = is_in ? ep->rx_channel : ep->tx_channel;
 		if (dma) {
 			status = ep->musb->dma_controller->channel_abort(dma);
-			dev_dbg(musb->controller,
-				"abort %cX%d DMA for urb %p --> %d\n",
+			musb_dbg(musb, "abort %cX%d DMA for urb %p --> %d",
 				is_in ? 'R' : 'T', ep->epnum,
 				urb, status);
 			urb->actual_length += dma->actual_len;
@@ -2447,10 +2429,7 @@
 	int			is_in  = usb_pipein(urb->pipe);
 	int			ret;
 
-	dev_dbg(musb->controller, "urb=%p, dev%d ep%d%s\n", urb,
-			usb_pipedevice(urb->pipe),
-			usb_pipeendpoint(urb->pipe),
-			is_in ? "in" : "out");
+	trace_musb_urb_deq(musb, urb);
 
 	spin_lock_irqsave(&musb->lock, flags);
 	ret = usb_hcd_check_unlink_urb(hcd, urb, status);
diff --git a/drivers/usb/musb/musb_trace.c b/drivers/usb/musb/musb_trace.c
new file mode 100644
index 0000000..70973d9
--- /dev/null
+++ b/drivers/usb/musb/musb_trace.c
@@ -0,0 +1,33 @@
+/*
+ * musb_trace.c - MUSB Controller Trace Support
+ *
+ * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Author: Bin Liu <b-liu@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2  of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#define CREATE_TRACE_POINTS
+#include "musb_trace.h"
+
+void musb_dbg(struct musb *musb, const char *fmt, ...)
+{
+	struct va_format vaf;
+	va_list args;
+
+	va_start(args, fmt);
+	vaf.fmt = fmt;
+	vaf.va = &args;
+
+	trace_musb_log(musb, &vaf);
+
+	va_end(args);
+}
diff --git a/drivers/usb/musb/musb_trace.h b/drivers/usb/musb/musb_trace.h
new file mode 100644
index 0000000..f031c9e
--- /dev/null
+++ b/drivers/usb/musb/musb_trace.h
@@ -0,0 +1,371 @@
+/*
+ * musb_trace.h - MUSB Controller Trace Support
+ *
+ * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Author: Bin Liu <b-liu@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2  of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM musb
+
+#if !defined(__MUSB_TRACE_H) || defined(TRACE_HEADER_MULTI_READ)
+#define __MUSB_TRACE_H
+
+#include <linux/types.h>
+#include <linux/tracepoint.h>
+#include <linux/usb.h>
+#include "musb_core.h"
+#ifdef CONFIG_USB_TI_CPPI41_DMA
+#include "cppi_dma.h"
+#endif
+
+#define MUSB_MSG_MAX   500
+
+TRACE_EVENT(musb_log,
+	TP_PROTO(struct musb *musb, struct va_format *vaf),
+	TP_ARGS(musb, vaf),
+	TP_STRUCT__entry(
+		__string(name, dev_name(musb->controller))
+		__dynamic_array(char, msg, MUSB_MSG_MAX)
+	),
+	TP_fast_assign(
+		__assign_str(name, dev_name(musb->controller));
+		vsnprintf(__get_str(msg), MUSB_MSG_MAX, vaf->fmt, *vaf->va);
+	),
+	TP_printk("%s: %s", __get_str(name), __get_str(msg))
+);
+
+DECLARE_EVENT_CLASS(musb_regb,
+	TP_PROTO(void *caller, const void *addr, unsigned int offset, u8 data),
+	TP_ARGS(caller, addr, offset, data),
+	TP_STRUCT__entry(
+		__field(void *, caller)
+		__field(const void *, addr)
+		__field(unsigned int, offset)
+		__field(u8, data)
+	),
+	TP_fast_assign(
+		__entry->caller = caller;
+		__entry->addr = addr;
+		__entry->offset = offset;
+		__entry->data = data;
+	),
+	TP_printk("%pS: %p + %04x: %02x",
+		__entry->caller, __entry->addr, __entry->offset, __entry->data)
+);
+
+DEFINE_EVENT(musb_regb, musb_readb,
+	TP_PROTO(void *caller, const void *addr, unsigned int offset, u8 data),
+	TP_ARGS(caller, addr, offset, data)
+);
+
+DEFINE_EVENT(musb_regb, musb_writeb,
+	TP_PROTO(void *caller, const void *addr, unsigned int offset, u8 data),
+	TP_ARGS(caller, addr, offset, data)
+);
+
+DECLARE_EVENT_CLASS(musb_regw,
+	TP_PROTO(void *caller, const void *addr, unsigned int offset, u16 data),
+	TP_ARGS(caller, addr, offset, data),
+	TP_STRUCT__entry(
+		__field(void *, caller)
+		__field(const void *, addr)
+		__field(unsigned int, offset)
+		__field(u16, data)
+	),
+	TP_fast_assign(
+		__entry->caller = caller;
+		__entry->addr = addr;
+		__entry->offset = offset;
+		__entry->data = data;
+	),
+	TP_printk("%pS: %p + %04x: %04x",
+		__entry->caller, __entry->addr, __entry->offset, __entry->data)
+);
+
+DEFINE_EVENT(musb_regw, musb_readw,
+	TP_PROTO(void *caller, const void *addr, unsigned int offset, u16 data),
+	TP_ARGS(caller, addr, offset, data)
+);
+
+DEFINE_EVENT(musb_regw, musb_writew,
+	TP_PROTO(void *caller, const void *addr, unsigned int offset, u16 data),
+	TP_ARGS(caller, addr, offset, data)
+);
+
+DECLARE_EVENT_CLASS(musb_regl,
+	TP_PROTO(void *caller, const void *addr, unsigned int offset, u32 data),
+	TP_ARGS(caller, addr, offset, data),
+	TP_STRUCT__entry(
+		__field(void *, caller)
+		__field(const void *, addr)
+		__field(unsigned int, offset)
+		__field(u32, data)
+	),
+	TP_fast_assign(
+		__entry->caller = caller;
+		__entry->addr = addr;
+		__entry->offset = offset;
+		__entry->data = data;
+	),
+	TP_printk("%pS: %p + %04x: %08x",
+		__entry->caller, __entry->addr, __entry->offset, __entry->data)
+);
+
+DEFINE_EVENT(musb_regl, musb_readl,
+	TP_PROTO(void *caller, const void *addr, unsigned int offset, u32 data),
+	TP_ARGS(caller, addr, offset, data)
+);
+
+DEFINE_EVENT(musb_regl, musb_writel,
+	TP_PROTO(void *caller, const void *addr, unsigned int offset, u32 data),
+	TP_ARGS(caller, addr, offset, data)
+);
+
+TRACE_EVENT(musb_isr,
+	TP_PROTO(struct musb *musb),
+	TP_ARGS(musb),
+	TP_STRUCT__entry(
+		__string(name, dev_name(musb->controller))
+		__field(u8, int_usb)
+		__field(u16, int_tx)
+		__field(u16, int_rx)
+	),
+	TP_fast_assign(
+		__assign_str(name, dev_name(musb->controller));
+		__entry->int_usb = musb->int_usb;
+		__entry->int_tx = musb->int_tx;
+		__entry->int_rx = musb->int_rx;
+	),
+	TP_printk("%s: usb %02x, tx %04x, rx %04x",
+		__get_str(name), __entry->int_usb,
+		__entry->int_tx, __entry->int_rx
+	)
+);
+
+DECLARE_EVENT_CLASS(musb_urb,
+	TP_PROTO(struct musb *musb, struct urb *urb),
+	TP_ARGS(musb, urb),
+	TP_STRUCT__entry(
+		__string(name, dev_name(musb->controller))
+		__field(struct urb *, urb)
+		__field(unsigned int, pipe)
+		__field(int, status)
+		__field(unsigned int, flag)
+		__field(u32, buf_len)
+		__field(u32, actual_len)
+	),
+	TP_fast_assign(
+		__assign_str(name, dev_name(musb->controller));
+		__entry->urb = urb;
+		__entry->pipe = urb->pipe;
+		__entry->status = urb->status;
+		__entry->flag = urb->transfer_flags;
+		__entry->buf_len = urb->transfer_buffer_length;
+		__entry->actual_len = urb->actual_length;
+	),
+	TP_printk("%s: %p, dev%d ep%d%s, flag 0x%x, len %d/%d, status %d",
+			__get_str(name), __entry->urb,
+			usb_pipedevice(__entry->pipe),
+			usb_pipeendpoint(__entry->pipe),
+			usb_pipein(__entry->pipe) ? "in" : "out",
+			__entry->flag,
+			__entry->actual_len, __entry->buf_len,
+			__entry->status
+	)
+);
+
+DEFINE_EVENT(musb_urb, musb_urb_start,
+	TP_PROTO(struct musb *musb, struct urb *urb),
+	TP_ARGS(musb, urb)
+);
+
+DEFINE_EVENT(musb_urb, musb_urb_gb,
+	TP_PROTO(struct musb *musb, struct urb *urb),
+	TP_ARGS(musb, urb)
+);
+
+DEFINE_EVENT(musb_urb, musb_urb_rx,
+	TP_PROTO(struct musb *musb, struct urb *urb),
+	TP_ARGS(musb, urb)
+);
+
+DEFINE_EVENT(musb_urb, musb_urb_tx,
+	TP_PROTO(struct musb *musb, struct urb *urb),
+	TP_ARGS(musb, urb)
+);
+
+DEFINE_EVENT(musb_urb, musb_urb_enq,
+	TP_PROTO(struct musb *musb, struct urb *urb),
+	TP_ARGS(musb, urb)
+);
+
+DEFINE_EVENT(musb_urb, musb_urb_deq,
+	TP_PROTO(struct musb *musb, struct urb *urb),
+	TP_ARGS(musb, urb)
+);
+
+DECLARE_EVENT_CLASS(musb_req,
+	TP_PROTO(struct musb_request *req),
+	TP_ARGS(req),
+	TP_STRUCT__entry(
+		__field(struct usb_request *, req)
+		__field(u8, is_tx)
+		__field(u8, epnum)
+		__field(int, status)
+		__field(unsigned int, buf_len)
+		__field(unsigned int, actual_len)
+		__field(unsigned int, zero)
+		__field(unsigned int, short_not_ok)
+		__field(unsigned int, no_interrupt)
+	),
+	TP_fast_assign(
+		__entry->req = &req->request;
+		__entry->is_tx = req->tx;
+		__entry->epnum = req->epnum;
+		__entry->status = req->request.status;
+		__entry->buf_len = req->request.length;
+		__entry->actual_len = req->request.actual;
+		__entry->zero = req->request.zero;
+		__entry->short_not_ok = req->request.short_not_ok;
+		__entry->no_interrupt = req->request.no_interrupt;
+	),
+	TP_printk("%p, ep%d %s, %s%s%s, len %d/%d, status %d",
+			__entry->req, __entry->epnum,
+			__entry->is_tx ? "tx/IN" : "rx/OUT",
+			__entry->zero ? "Z" : "z",
+			__entry->short_not_ok ? "S" : "s",
+			__entry->no_interrupt ? "I" : "i",
+			__entry->actual_len, __entry->buf_len,
+			__entry->status
+	)
+);
+
+DEFINE_EVENT(musb_req, musb_req_gb,
+	TP_PROTO(struct musb_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(musb_req, musb_req_tx,
+	TP_PROTO(struct musb_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(musb_req, musb_req_rx,
+	TP_PROTO(struct musb_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(musb_req, musb_req_alloc,
+	TP_PROTO(struct musb_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(musb_req, musb_req_free,
+	TP_PROTO(struct musb_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(musb_req, musb_req_start,
+	TP_PROTO(struct musb_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(musb_req, musb_req_enq,
+	TP_PROTO(struct musb_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(musb_req, musb_req_deq,
+	TP_PROTO(struct musb_request *req),
+	TP_ARGS(req)
+);
+
+#ifdef CONFIG_USB_TI_CPPI41_DMA
+DECLARE_EVENT_CLASS(musb_cppi41,
+	TP_PROTO(struct cppi41_dma_channel *ch),
+	TP_ARGS(ch),
+	TP_STRUCT__entry(
+		__field(struct cppi41_dma_channel *, ch)
+		__string(name, dev_name(ch->hw_ep->musb->controller))
+		__field(u8, hwep)
+		__field(u8, port)
+		__field(u8, is_tx)
+		__field(u32, len)
+		__field(u32, prog_len)
+		__field(u32, xferred)
+	),
+	TP_fast_assign(
+		__entry->ch = ch;
+		__assign_str(name, dev_name(ch->hw_ep->musb->controller));
+		__entry->hwep = ch->hw_ep->epnum;
+		__entry->port = ch->port_num;
+		__entry->is_tx = ch->is_tx;
+		__entry->len = ch->total_len;
+		__entry->prog_len = ch->prog_len;
+		__entry->xferred = ch->transferred;
+	),
+	TP_printk("%s: %p, hwep%d ch%d%s, prog_len %d, len %d/%d",
+			__get_str(name), __entry->ch, __entry->hwep,
+			__entry->port, __entry->is_tx ? "tx" : "rx",
+			__entry->prog_len, __entry->xferred, __entry->len
+	)
+);
+
+DEFINE_EVENT(musb_cppi41, musb_cppi41_done,
+	TP_PROTO(struct cppi41_dma_channel *ch),
+	TP_ARGS(ch)
+);
+
+DEFINE_EVENT(musb_cppi41, musb_cppi41_gb,
+	TP_PROTO(struct cppi41_dma_channel *ch),
+	TP_ARGS(ch)
+);
+
+DEFINE_EVENT(musb_cppi41, musb_cppi41_config,
+	TP_PROTO(struct cppi41_dma_channel *ch),
+	TP_ARGS(ch)
+);
+
+DEFINE_EVENT(musb_cppi41, musb_cppi41_cont,
+	TP_PROTO(struct cppi41_dma_channel *ch),
+	TP_ARGS(ch)
+);
+
+DEFINE_EVENT(musb_cppi41, musb_cppi41_alloc,
+	TP_PROTO(struct cppi41_dma_channel *ch),
+	TP_ARGS(ch)
+);
+
+DEFINE_EVENT(musb_cppi41, musb_cppi41_abort,
+	TP_PROTO(struct cppi41_dma_channel *ch),
+	TP_ARGS(ch)
+);
+
+DEFINE_EVENT(musb_cppi41, musb_cppi41_free,
+	TP_PROTO(struct cppi41_dma_channel *ch),
+	TP_ARGS(ch)
+);
+#endif /* CONFIG_USB_TI_CPPI41_DMA */
+
+#endif /* __MUSB_TRACE_H */
+
+/* this part has to be here */
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE musb_trace
+
+#include <trace/define_trace.h>
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index 92d5f71..192248f 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -55,8 +55,7 @@
 
 	power = musb_readb(musb->mregs, MUSB_POWER);
 	power &= ~MUSB_POWER_RESUME;
-	dev_dbg(musb->controller, "root port resume stopped, power %02x\n",
-		power);
+	musb_dbg(musb, "root port resume stopped, power %02x", power);
 	musb_writeb(musb->mregs, MUSB_POWER, power);
 
 	/*
@@ -104,7 +103,7 @@
 				break;
 		}
 
-		dev_dbg(musb->controller, "Root port suspended, power %02x\n", power);
+		musb_dbg(musb, "Root port suspended, power %02x", power);
 
 		musb->port1_status |= USB_PORT_STAT_SUSPEND;
 		switch (musb->xceiv->otg->state) {
@@ -123,7 +122,7 @@
 			musb_platform_try_idle(musb, 0);
 			break;
 		default:
-			dev_dbg(musb->controller, "bogus rh suspend? %s\n",
+			musb_dbg(musb, "bogus rh suspend? %s",
 				usb_otg_state_string(musb->xceiv->otg->state));
 		}
 	} else if (power & MUSB_POWER_SUSPENDM) {
@@ -131,7 +130,7 @@
 		power |= MUSB_POWER_RESUME;
 		musb_writeb(mbase, MUSB_POWER, power);
 
-		dev_dbg(musb->controller, "Root port resuming, power %02x\n", power);
+		musb_dbg(musb, "Root port resuming, power %02x", power);
 
 		/* later, GetPortStatus will stop RESUME signaling */
 		musb->port1_status |= MUSB_PORT_STAT_RESUME;
@@ -146,7 +145,7 @@
 	void __iomem	*mbase = musb->mregs;
 
 	if (musb->xceiv->otg->state == OTG_STATE_B_IDLE) {
-		dev_dbg(musb->controller, "HNP: Returning from HNP; no hub reset from b_idle\n");
+		musb_dbg(musb, "HNP: Returning from HNP; no hub reset from b_idle");
 		musb->port1_status &= ~USB_PORT_STAT_RESET;
 		return;
 	}
@@ -194,7 +193,7 @@
 		schedule_delayed_work(&musb->deassert_reset_work,
 				      msecs_to_jiffies(50));
 	} else {
-		dev_dbg(musb->controller, "root port reset stopped\n");
+		musb_dbg(musb, "root port reset stopped");
 		musb_platform_pre_root_reset_end(musb);
 		musb_writeb(mbase, MUSB_POWER,
 				power & ~MUSB_POWER_RESET);
@@ -202,7 +201,7 @@
 
 		power = musb_readb(mbase, MUSB_POWER);
 		if (power & MUSB_POWER_HSMODE) {
-			dev_dbg(musb->controller, "high-speed device connected\n");
+			musb_dbg(musb, "high-speed device connected");
 			musb->port1_status |= USB_PORT_STAT_HIGH_SPEED;
 		}
 
@@ -242,7 +241,7 @@
 		musb->xceiv->otg->state = OTG_STATE_B_IDLE;
 		break;
 	default:
-		dev_dbg(musb->controller, "host disconnect (%s)\n",
+		musb_dbg(musb, "host disconnect (%s)",
 			usb_otg_state_string(musb->xceiv->otg->state));
 	}
 }
@@ -337,7 +336,7 @@
 		default:
 			goto error;
 		}
-		dev_dbg(musb->controller, "clear feature %d\n", wValue);
+		musb_dbg(musb, "clear feature %d", wValue);
 		musb->port1_status &= ~(1 << wValue);
 		break;
 	case GetHubDescriptor:
@@ -372,8 +371,7 @@
 				(__le32 *) buf);
 
 		/* port change status is more interesting */
-		dev_dbg(musb->controller, "port status %08x\n",
-				musb->port1_status);
+		musb_dbg(musb, "port status %08x", musb->port1_status);
 		break;
 	case SetPortFeature:
 		if ((wIndex & 0xff) != 1)
@@ -443,7 +441,7 @@
 		default:
 			goto error;
 		}
-		dev_dbg(musb->controller, "set feature %d\n", wValue);
+		musb_dbg(musb, "set feature %d", wValue);
 		musb->port1_status |= 1 << wValue;
 		break;
 
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
index 8abfe4e..3620073 100644
--- a/drivers/usb/musb/musbhsdma.c
+++ b/drivers/usb/musb/musbhsdma.c
@@ -117,7 +117,7 @@
 	u8 bchannel = musb_channel->idx;
 	u16 csr = 0;
 
-	dev_dbg(musb->controller, "%p, pkt_sz %d, addr %pad, len %d, mode %d\n",
+	musb_dbg(musb, "%p, pkt_sz %d, addr %pad, len %d, mode %d",
 			channel, packet_sz, &dma_addr, len, mode);
 
 	if (mode) {
@@ -152,7 +152,7 @@
 	struct musb_dma_controller *controller = musb_channel->controller;
 	struct musb *musb = controller->private_data;
 
-	dev_dbg(musb->controller, "ep%d-%s pkt_sz %d, dma_addr %pad length %d, mode %d\n",
+	musb_dbg(musb, "ep%d-%s pkt_sz %d, dma_addr %pad length %d, mode %d",
 		musb_channel->epnum,
 		musb_channel->transmit ? "Tx" : "Rx",
 		packet_sz, &dma_addr, len, mode);
@@ -266,7 +266,7 @@
 #endif
 
 	if (!int_hsdma) {
-		dev_dbg(musb->controller, "spurious DMA irq\n");
+		musb_dbg(musb, "spurious DMA irq");
 
 		for (bchannel = 0; bchannel < MUSB_HSDMA_CHANNELS; bchannel++) {
 			musb_channel = (struct musb_dma_channel *)
@@ -280,7 +280,7 @@
 			}
 		}
 
-		dev_dbg(musb->controller, "int_hsdma = 0x%x\n", int_hsdma);
+		musb_dbg(musb, "int_hsdma = 0x%x", int_hsdma);
 
 		if (!int_hsdma)
 			goto done;
@@ -307,7 +307,7 @@
 				channel->actual_len = addr
 					- musb_channel->start_addr;
 
-				dev_dbg(musb->controller, "ch %p, 0x%x -> 0x%x (%zu / %d) %s\n",
+				musb_dbg(musb, "ch %p, 0x%x -> 0x%x (%zu / %d) %s",
 					channel, musb_channel->start_addr,
 					addr, channel->actual_len,
 					musb_channel->len,
diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c
index 7650051..c6ee166 100644
--- a/drivers/usb/musb/sunxi.c
+++ b/drivers/usb/musb/sunxi.c
@@ -256,12 +256,10 @@
 	writeb(SUNXI_MUSB_VEND0_PIO_MODE, musb->mregs + SUNXI_MUSB_VEND0);
 
 	/* Register notifier before calling phy_init() */
-	if (musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE) {
-		ret = extcon_register_notifier(glue->extcon, EXTCON_USB_HOST,
-					       &glue->host_nb);
-		if (ret)
-			goto error_reset_assert;
-	}
+	ret = extcon_register_notifier(glue->extcon, EXTCON_USB_HOST,
+				       &glue->host_nb);
+	if (ret)
+		goto error_reset_assert;
 
 	ret = phy_init(glue->phy);
 	if (ret)
@@ -275,9 +273,8 @@
 	return 0;
 
 error_unregister_notifier:
-	if (musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
-		extcon_unregister_notifier(glue->extcon, EXTCON_USB_HOST,
-					   &glue->host_nb);
+	extcon_unregister_notifier(glue->extcon, EXTCON_USB_HOST,
+				   &glue->host_nb);
 error_reset_assert:
 	if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags))
 		reset_control_assert(glue->rst);
@@ -301,9 +298,8 @@
 
 	phy_exit(glue->phy);
 
-	if (musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
-		extcon_unregister_notifier(glue->extcon, EXTCON_USB_HOST,
-					   &glue->host_nb);
+	extcon_unregister_notifier(glue->extcon, EXTCON_USB_HOST,
+				   &glue->host_nb);
 
 	if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags))
 		reset_control_assert(glue->rst);
@@ -315,25 +311,6 @@
 	return 0;
 }
 
-static int sunxi_set_mode(struct musb *musb, u8 mode)
-{
-	struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent);
-	int ret;
-
-	if (mode == MUSB_HOST) {
-		ret = phy_power_on(glue->phy);
-		if (ret)
-			return ret;
-
-		set_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags);
-		/* Stop musb work from turning vbus off again */
-		set_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags);
-		musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
-	}
-
-	return 0;
-}
-
 static void sunxi_musb_enable(struct musb *musb)
 {
 	struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent);
@@ -354,13 +331,13 @@
 	clear_bit(SUNXI_MUSB_FL_ENABLED, &glue->flags);
 }
 
-struct dma_controller *sunxi_musb_dma_controller_create(struct musb *musb,
-						    void __iomem *base)
+static struct dma_controller *
+sunxi_musb_dma_controller_create(struct musb *musb, void __iomem *base)
 {
 	return NULL;
 }
 
-void sunxi_musb_dma_controller_destroy(struct dma_controller *c)
+static void sunxi_musb_dma_controller_destroy(struct dma_controller *c)
 {
 }
 
@@ -582,7 +559,6 @@
 	.exit		= sunxi_musb_exit,
 	.enable		= sunxi_musb_enable,
 	.disable	= sunxi_musb_disable,
-	.set_mode	= sunxi_set_mode,
 	.fifo_offset	= sunxi_musb_fifo_offset,
 	.ep_offset	= sunxi_musb_ep_offset,
 	.busctl_offset	= sunxi_musb_busctl_offset,
@@ -638,10 +614,6 @@
 		return -EINVAL;
 	}
 
-	glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
-	if (!glue)
-		return -ENOMEM;
-
 	memset(&pdata, 0, sizeof(pdata));
 	switch (usb_get_dr_mode(&pdev->dev)) {
 #if defined CONFIG_USB_MUSB_DUAL_ROLE || defined CONFIG_USB_MUSB_HOST
@@ -649,15 +621,13 @@
 		pdata.mode = MUSB_PORT_MODE_HOST;
 		break;
 #endif
+#if defined CONFIG_USB_MUSB_DUAL_ROLE || defined CONFIG_USB_MUSB_GADGET
+	case USB_DR_MODE_PERIPHERAL:
+		pdata.mode = MUSB_PORT_MODE_GADGET;
+		break;
+#endif
 #ifdef CONFIG_USB_MUSB_DUAL_ROLE
 	case USB_DR_MODE_OTG:
-		glue->extcon = extcon_get_edev_by_phandle(&pdev->dev, 0);
-		if (IS_ERR(glue->extcon)) {
-			if (PTR_ERR(glue->extcon) == -EPROBE_DEFER)
-				return -EPROBE_DEFER;
-			dev_err(&pdev->dev, "Invalid or missing extcon\n");
-			return PTR_ERR(glue->extcon);
-		}
 		pdata.mode = MUSB_PORT_MODE_DUAL_ROLE;
 		break;
 #endif
@@ -668,6 +638,10 @@
 	pdata.platform_ops	= &sunxi_musb_ops;
 	pdata.config		= &sunxi_musb_hdrc_config;
 
+	glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
+	if (!glue)
+		return -ENOMEM;
+
 	glue->dev = &pdev->dev;
 	INIT_WORK(&glue->work, sunxi_musb_work);
 	glue->host_nb.notifier_call = sunxi_musb_host_notifier;
@@ -701,6 +675,14 @@
 		}
 	}
 
+	glue->extcon = extcon_get_edev_by_phandle(&pdev->dev, 0);
+	if (IS_ERR(glue->extcon)) {
+		if (PTR_ERR(glue->extcon) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		dev_err(&pdev->dev, "Invalid or missing extcon\n");
+		return PTR_ERR(glue->extcon);
+	}
+
 	glue->phy = devm_phy_get(&pdev->dev, "usb");
 	if (IS_ERR(glue->phy)) {
 		if (PTR_ERR(glue->phy) == -EPROBE_DEFER)
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index c690474..b9c409a 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -21,6 +21,7 @@
 config FSL_USB2_OTG
 	bool "Freescale USB OTG Transceiver Driver"
 	depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG_FSM && PM
+	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
 	select USB_PHY
 	help
 	  Enable this to support Freescale USB OTG transceiver.
@@ -29,6 +30,7 @@
 	tristate "Philips ISP1301 with OMAP OTG"
 	depends on I2C && ARCH_OMAP_OTG
 	depends on USB
+	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
 	select USB_PHY
 	help
 	  If you say yes here you get support for the Philips ISP1301
@@ -43,7 +45,7 @@
 config KEYSTONE_USB_PHY
 	tristate "Keystone USB PHY Driver"
 	depends on ARCH_KEYSTONE || COMPILE_TEST
-	select NOP_USB_XCEIV
+	depends on NOP_USB_XCEIV
 	help
 	  Enable this to support Keystone USB phy. This driver provides
 	  interface to interact with USB 2.0 and USB 3.0 PHY that is part
@@ -51,6 +53,7 @@
 
 config NOP_USB_XCEIV
 	tristate "NOP USB Transceiver Driver"
+	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, NOP can't be built-in
 	select USB_PHY
 	help
 	  This driver is to be used by all the usb transceiver which are either
@@ -63,9 +66,9 @@
 config AM335X_PHY_USB
 	tristate "AM335x USB PHY Driver"
 	depends on ARM || COMPILE_TEST
+	depends on NOP_USB_XCEIV
 	select USB_PHY
 	select AM335X_CONTROL_USB
-	select NOP_USB_XCEIV
 	select USB_COMMON
 	help
 	  This driver provides PHY support for that phy which part for the
@@ -92,6 +95,7 @@
 config USB_GPIO_VBUS
 	tristate "GPIO based peripheral-only VBUS sensing 'transceiver'"
 	depends on GPIOLIB || COMPILE_TEST
+	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
 	select USB_PHY
 	help
 	  Provides simple GPIO VBUS sensing for controllers with an
@@ -112,6 +116,7 @@
 config TAHVO_USB
 	tristate "Tahvo USB transceiver driver"
 	depends on MFD_RETU && EXTCON
+	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
 	select USB_PHY
 	help
 	  Enable this to support USB transceiver on Tahvo. This is used
@@ -140,6 +145,7 @@
 config USB_MSM_OTG
 	tristate "Qualcomm on-chip USB OTG controller support"
 	depends on (USB || USB_GADGET) && (ARCH_QCOM || COMPILE_TEST)
+	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
 	depends on RESET_CONTROLLER
 	depends on EXTCON
 	select USB_PHY
@@ -169,6 +175,7 @@
 config USB_MV_OTG
 	tristate "Marvell USB OTG support"
 	depends on USB_EHCI_MV && USB_MV_UDC && PM && USB_OTG
+	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
 	select USB_PHY
 	help
 	  Say Y here if you want to build Marvell USB OTG transciever
diff --git a/drivers/usb/phy/phy-am335x.c b/drivers/usb/phy/phy-am335x.c
index a262a43..7e5aece 100644
--- a/drivers/usb/phy/phy-am335x.c
+++ b/drivers/usb/phy/phy-am335x.c
@@ -54,7 +54,7 @@
 		return am_phy->id;
 	}
 
-	am_phy->dr_mode = of_usb_get_dr_mode_by_phy(pdev->dev.of_node);
+	am_phy->dr_mode = of_usb_get_dr_mode_by_phy(pdev->dev.of_node, -1);
 
 	ret = usb_phy_gen_create_phy(dev, &am_phy->usb_phy_gen, NULL);
 	if (ret)
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index 72b387d..8a34759 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -18,6 +18,7 @@
 
 #include <linux/module.h>
 #include <linux/device.h>
+#include <linux/extcon.h>
 #include <linux/gpio/consumer.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
@@ -35,6 +36,8 @@
 #include <linux/of_device.h>
 #include <linux/reboot.h>
 #include <linux/reset.h>
+#include <linux/types.h>
+#include <linux/usb/otg.h>
 
 #include <linux/usb.h>
 #include <linux/usb/otg.h>
@@ -42,10 +45,183 @@
 #include <linux/usb/ulpi.h>
 #include <linux/usb/gadget.h>
 #include <linux/usb/hcd.h>
-#include <linux/usb/msm_hsusb.h>
 #include <linux/usb/msm_hsusb_hw.h>
 #include <linux/regulator/consumer.h>
 
+/**
+ * OTG control
+ *
+ * OTG_NO_CONTROL	Id/VBUS notifications not required. Useful in host
+ *                      only configuration.
+ * OTG_PHY_CONTROL	Id/VBUS notifications comes form USB PHY.
+ * OTG_PMIC_CONTROL	Id/VBUS notifications comes from PMIC hardware.
+ * OTG_USER_CONTROL	Id/VBUS notifcations comes from User via sysfs.
+ *
+ */
+enum otg_control_type {
+	OTG_NO_CONTROL = 0,
+	OTG_PHY_CONTROL,
+	OTG_PMIC_CONTROL,
+	OTG_USER_CONTROL,
+};
+
+/**
+ * PHY used in
+ *
+ * INVALID_PHY			Unsupported PHY
+ * CI_45NM_INTEGRATED_PHY	Chipidea 45nm integrated PHY
+ * SNPS_28NM_INTEGRATED_PHY	Synopsis 28nm integrated PHY
+ *
+ */
+enum msm_usb_phy_type {
+	INVALID_PHY = 0,
+	CI_45NM_INTEGRATED_PHY,
+	SNPS_28NM_INTEGRATED_PHY,
+};
+
+#define IDEV_CHG_MAX	1500
+#define IUNIT		100
+
+/**
+ * Different states involved in USB charger detection.
+ *
+ * USB_CHG_STATE_UNDEFINED	USB charger is not connected or detection
+ *                              process is not yet started.
+ * USB_CHG_STATE_WAIT_FOR_DCD	Waiting for Data pins contact.
+ * USB_CHG_STATE_DCD_DONE	Data pin contact is detected.
+ * USB_CHG_STATE_PRIMARY_DONE	Primary detection is completed (Detects
+ *                              between SDP and DCP/CDP).
+ * USB_CHG_STATE_SECONDARY_DONE	Secondary detection is completed (Detects
+ *                              between DCP and CDP).
+ * USB_CHG_STATE_DETECTED	USB charger type is determined.
+ *
+ */
+enum usb_chg_state {
+	USB_CHG_STATE_UNDEFINED = 0,
+	USB_CHG_STATE_WAIT_FOR_DCD,
+	USB_CHG_STATE_DCD_DONE,
+	USB_CHG_STATE_PRIMARY_DONE,
+	USB_CHG_STATE_SECONDARY_DONE,
+	USB_CHG_STATE_DETECTED,
+};
+
+/**
+ * USB charger types
+ *
+ * USB_INVALID_CHARGER	Invalid USB charger.
+ * USB_SDP_CHARGER	Standard downstream port. Refers to a downstream port
+ *                      on USB2.0 compliant host/hub.
+ * USB_DCP_CHARGER	Dedicated charger port (AC charger/ Wall charger).
+ * USB_CDP_CHARGER	Charging downstream port. Enumeration can happen and
+ *                      IDEV_CHG_MAX can be drawn irrespective of USB state.
+ *
+ */
+enum usb_chg_type {
+	USB_INVALID_CHARGER = 0,
+	USB_SDP_CHARGER,
+	USB_DCP_CHARGER,
+	USB_CDP_CHARGER,
+};
+
+/**
+ * struct msm_otg_platform_data - platform device data
+ *              for msm_otg driver.
+ * @phy_init_seq: PHY configuration sequence values. Value of -1 is reserved as
+ *              "do not overwrite default vaule at this address".
+ * @phy_init_sz: PHY configuration sequence size.
+ * @vbus_power: VBUS power on/off routine.
+ * @power_budget: VBUS power budget in mA (0 will be treated as 500mA).
+ * @mode: Supported mode (OTG/peripheral/host).
+ * @otg_control: OTG switch controlled by user/Id pin
+ */
+struct msm_otg_platform_data {
+	int *phy_init_seq;
+	int phy_init_sz;
+	void (*vbus_power)(bool on);
+	unsigned power_budget;
+	enum usb_dr_mode mode;
+	enum otg_control_type otg_control;
+	enum msm_usb_phy_type phy_type;
+	void (*setup_gpio)(enum usb_otg_state state);
+};
+
+/**
+ * struct msm_usb_cable - structure for exteternal connector cable
+ *			  state tracking
+ * @nb: hold event notification callback
+ * @conn: used for notification registration
+ */
+struct msm_usb_cable {
+	struct notifier_block		nb;
+	struct extcon_dev		*extcon;
+};
+
+/**
+ * struct msm_otg: OTG driver data. Shared by HCD and DCD.
+ * @otg: USB OTG Transceiver structure.
+ * @pdata: otg device platform data.
+ * @irq: IRQ number assigned for HSUSB controller.
+ * @clk: clock struct of usb_hs_clk.
+ * @pclk: clock struct of usb_hs_pclk.
+ * @core_clk: clock struct of usb_hs_core_clk.
+ * @regs: ioremapped register base address.
+ * @inputs: OTG state machine inputs(Id, SessValid etc).
+ * @sm_work: OTG state machine work.
+ * @in_lpm: indicates low power mode (LPM) state.
+ * @async_int: Async interrupt arrived.
+ * @cur_power: The amount of mA available from downstream port.
+ * @chg_work: Charger detection work.
+ * @chg_state: The state of charger detection process.
+ * @chg_type: The type of charger attached.
+ * @dcd_retires: The retry count used to track Data contact
+ *               detection process.
+ * @manual_pullup: true if VBUS is not routed to USB controller/phy
+ *	and controller driver therefore enables pull-up explicitly before
+ *	starting controller using usbcmd run/stop bit.
+ * @vbus: VBUS signal state trakining, using extcon framework
+ * @id: ID signal state trakining, using extcon framework
+ * @switch_gpio: Descriptor for GPIO used to control external Dual
+ *               SPDT USB Switch.
+ * @reboot: Used to inform the driver to route USB D+/D- line to Device
+ *	    connector
+ */
+struct msm_otg {
+	struct usb_phy phy;
+	struct msm_otg_platform_data *pdata;
+	int irq;
+	struct clk *clk;
+	struct clk *pclk;
+	struct clk *core_clk;
+	void __iomem *regs;
+#define ID		0
+#define B_SESS_VLD	1
+	unsigned long inputs;
+	struct work_struct sm_work;
+	atomic_t in_lpm;
+	int async_int;
+	unsigned cur_power;
+	int phy_number;
+	struct delayed_work chg_work;
+	enum usb_chg_state chg_state;
+	enum usb_chg_type chg_type;
+	u8 dcd_retries;
+	struct regulator *v3p3;
+	struct regulator *v1p8;
+	struct regulator *vddcx;
+
+	struct reset_control *phy_rst;
+	struct reset_control *link_rst;
+	int vdd_levels[3];
+
+	bool manual_pullup;
+
+	struct msm_usb_cable vbus;
+	struct msm_usb_cable id;
+
+	struct gpio_desc *switch_gpio;
+	struct notifier_block reboot;
+};
+
 #define MSM_USB_BASE	(motg->regs)
 #define DRIVER_NAME	"msm_otg"
 
diff --git a/drivers/usb/phy/phy-omap-otg.c b/drivers/usb/phy/phy-omap-otg.c
index c4bf2de..6f6d2a7 100644
--- a/drivers/usb/phy/phy-omap-otg.c
+++ b/drivers/usb/phy/phy-omap-otg.c
@@ -148,7 +148,7 @@
 	struct otg_device *otg_dev = platform_get_drvdata(pdev);
 	struct extcon_dev *edev = otg_dev->extcon;
 
-	extcon_unregister_notifier(edev, EXTCON_USB_HOST,&otg_dev->id_nb);
+	extcon_unregister_notifier(edev, EXTCON_USB_HOST, &otg_dev->id_nb);
 	extcon_unregister_notifier(edev, EXTCON_USB, &otg_dev->vbus_nb);
 
 	return 0;
diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c
index baeb7d2..8fbbc2d 100644
--- a/drivers/usb/renesas_usbhs/common.c
+++ b/drivers/usb/renesas_usbhs/common.c
@@ -697,7 +697,7 @@
 probe_end_pipe_exit:
 	usbhs_pipe_remove(priv);
 
-	dev_info(&pdev->dev, "probe failed\n");
+	dev_info(&pdev->dev, "probe failed (%d)\n", ret);
 
 	return ret;
 }
diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c
index 7be4e7d..280ed5f 100644
--- a/drivers/usb/renesas_usbhs/fifo.c
+++ b/drivers/usb/renesas_usbhs/fifo.c
@@ -810,20 +810,27 @@
 {
 	struct usbhs_pkt *pkt = container_of(work, struct usbhs_pkt, work);
 	struct usbhs_pipe *pipe = pkt->pipe;
-	struct usbhs_fifo *fifo = usbhs_pipe_to_fifo(pipe);
+	struct usbhs_fifo *fifo;
 	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
 	struct dma_async_tx_descriptor *desc;
-	struct dma_chan *chan = usbhsf_dma_chan_get(fifo, pkt);
+	struct dma_chan *chan;
 	struct device *dev = usbhs_priv_to_dev(priv);
 	enum dma_transfer_direction dir;
+	unsigned long flags;
 
+	usbhs_lock(priv, flags);
+	fifo = usbhs_pipe_to_fifo(pipe);
+	if (!fifo)
+		goto xfer_work_end;
+
+	chan = usbhsf_dma_chan_get(fifo, pkt);
 	dir = usbhs_pipe_is_dir_in(pipe) ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV;
 
 	desc = dmaengine_prep_slave_single(chan, pkt->dma + pkt->actual,
 					pkt->trans, dir,
 					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!desc)
-		return;
+		goto xfer_work_end;
 
 	desc->callback		= usbhsf_dma_complete;
 	desc->callback_param	= pipe;
@@ -831,7 +838,7 @@
 	pkt->cookie = dmaengine_submit(desc);
 	if (pkt->cookie < 0) {
 		dev_err(dev, "Failed to submit dma descriptor\n");
-		return;
+		goto xfer_work_end;
 	}
 
 	dev_dbg(dev, "  %s %d (%d/ %d)\n",
@@ -842,6 +849,9 @@
 	usbhs_pipe_set_trans_count_if_bulk(pipe, pkt->trans);
 	dma_async_issue_pending(chan);
 	usbhs_pipe_enable(pipe);
+
+xfer_work_end:
+	usbhs_unlock(priv, flags);
 }
 
 /*
diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c
index 30345c2..50f3363 100644
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -585,6 +585,9 @@
 	struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv);
 	struct usbhs_pipe *pipe;
 	int ret = -EIO;
+	unsigned long flags;
+
+	usbhs_lock(priv, flags);
 
 	/*
 	 * if it already have pipe,
@@ -593,7 +596,8 @@
 	if (uep->pipe) {
 		usbhs_pipe_clear(uep->pipe);
 		usbhs_pipe_sequence_data0(uep->pipe);
-		return 0;
+		ret = 0;
+		goto usbhsg_ep_enable_end;
 	}
 
 	pipe = usbhs_pipe_malloc(priv,
@@ -621,6 +625,9 @@
 		ret = 0;
 	}
 
+usbhsg_ep_enable_end:
+	usbhs_unlock(priv, flags);
+
 	return ret;
 }
 
diff --git a/drivers/usb/renesas_usbhs/rcar3.c b/drivers/usb/renesas_usbhs/rcar3.c
index 38b01f2..1d70add 100644
--- a/drivers/usb/renesas_usbhs/rcar3.c
+++ b/drivers/usb/renesas_usbhs/rcar3.c
@@ -23,7 +23,7 @@
 #define UGCTRL2_RESERVED_3	0x00000001	/* bit[3:0] should be B'0001 */
 #define UGCTRL2_USB0SEL_OTG	0x00000030
 
-void usbhs_write32(struct usbhs_priv *priv, u32 reg, u32 data)
+static void usbhs_write32(struct usbhs_priv *priv, u32 reg, u32 data)
 {
 	iowrite32(data, priv->base + reg);
 }
diff --git a/drivers/usb/usbip/usbip_common.h b/drivers/usb/usbip/usbip_common.h
index c7508cb..9f49037 100644
--- a/drivers/usb/usbip/usbip_common.h
+++ b/drivers/usb/usbip/usbip_common.h
@@ -245,7 +245,7 @@
 #define USBIP_EH_RESET		(1 << 2)
 #define USBIP_EH_UNUSABLE	(1 << 3)
 
-#define SDEV_EVENT_REMOVED   (USBIP_EH_SHUTDOWN | USBIP_EH_RESET | USBIP_EH_BYE)
+#define	SDEV_EVENT_REMOVED	(USBIP_EH_SHUTDOWN | USBIP_EH_BYE)
 #define	SDEV_EVENT_DOWN		(USBIP_EH_SHUTDOWN | USBIP_EH_RESET)
 #define	SDEV_EVENT_ERROR_TCP	(USBIP_EH_SHUTDOWN | USBIP_EH_RESET)
 #define	SDEV_EVENT_ERROR_SUBMIT	(USBIP_EH_SHUTDOWN | USBIP_EH_RESET)
diff --git a/drivers/usb/usbip/vudc_sysfs.c b/drivers/usb/usbip/vudc_sysfs.c
index 99397fa..0f98f2c 100644
--- a/drivers/usb/usbip/vudc_sysfs.c
+++ b/drivers/usb/usbip/vudc_sysfs.c
@@ -40,7 +40,7 @@
 	struct usb_ctrlrequest req;
 	int ret;
 
-	if (!udc || !udc->driver || !udc->pullup)
+	if (!udc->driver || !udc->pullup)
 		return -EINVAL;
 
 	req.bRequestType = USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE;
diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index a810f2a..f08b672 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -22,12 +22,20 @@
 
 struct phy;
 
+enum phy_mode {
+	PHY_MODE_INVALID,
+	PHY_MODE_USB_HOST,
+	PHY_MODE_USB_DEVICE,
+	PHY_MODE_USB_OTG,
+};
+
 /**
  * struct phy_ops - set of function pointers for performing phy operations
  * @init: operation to be performed for initializing phy
  * @exit: operation to be performed while exiting
  * @power_on: powering on the phy
  * @power_off: powering off the phy
+ * @set_mode: set the mode of the phy
  * @owner: the module owner containing the ops
  */
 struct phy_ops {
@@ -35,6 +43,7 @@
 	int	(*exit)(struct phy *phy);
 	int	(*power_on)(struct phy *phy);
 	int	(*power_off)(struct phy *phy);
+	int	(*set_mode)(struct phy *phy, enum phy_mode mode);
 	struct module *owner;
 };
 
@@ -126,6 +135,7 @@
 int phy_exit(struct phy *phy);
 int phy_power_on(struct phy *phy);
 int phy_power_off(struct phy *phy);
+int phy_set_mode(struct phy *phy, enum phy_mode mode);
 static inline int phy_get_bus_width(struct phy *phy)
 {
 	return phy->attrs.bus_width;
@@ -233,6 +243,13 @@
 	return -ENOSYS;
 }
 
+static inline int phy_set_mode(struct phy *phy, enum phy_mode mode)
+{
+	if (!phy)
+		return 0;
+	return -ENOSYS;
+}
+
 static inline int phy_get_bus_width(struct phy *phy)
 {
 	return -ENOSYS;
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index fefe8b0..612dbdf 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -25,6 +25,8 @@
 #include <linux/workqueue.h>
 #include <linux/usb/ch9.h>
 
+#define UDC_TRACE_STR_MAX	512
+
 struct usb_ep;
 
 /**
@@ -228,307 +230,49 @@
 
 /*-------------------------------------------------------------------------*/
 
-/**
- * usb_ep_set_maxpacket_limit - set maximum packet size limit for endpoint
- * @ep:the endpoint being configured
- * @maxpacket_limit:value of maximum packet size limit
- *
- * This function should be used only in UDC drivers to initialize endpoint
- * (usually in probe function).
- */
+#if IS_ENABLED(CONFIG_USB_GADGET)
+void usb_ep_set_maxpacket_limit(struct usb_ep *ep, unsigned maxpacket_limit);
+int usb_ep_enable(struct usb_ep *ep);
+int usb_ep_disable(struct usb_ep *ep);
+struct usb_request *usb_ep_alloc_request(struct usb_ep *ep, gfp_t gfp_flags);
+void usb_ep_free_request(struct usb_ep *ep, struct usb_request *req);
+int usb_ep_queue(struct usb_ep *ep, struct usb_request *req, gfp_t gfp_flags);
+int usb_ep_dequeue(struct usb_ep *ep, struct usb_request *req);
+int usb_ep_set_halt(struct usb_ep *ep);
+int usb_ep_clear_halt(struct usb_ep *ep);
+int usb_ep_set_wedge(struct usb_ep *ep);
+int usb_ep_fifo_status(struct usb_ep *ep);
+void usb_ep_fifo_flush(struct usb_ep *ep);
+#else
 static inline void usb_ep_set_maxpacket_limit(struct usb_ep *ep,
-					      unsigned maxpacket_limit)
-{
-	ep->maxpacket_limit = maxpacket_limit;
-	ep->maxpacket = maxpacket_limit;
-}
-
-/**
- * usb_ep_enable - configure endpoint, making it usable
- * @ep:the endpoint being configured.  may not be the endpoint named "ep0".
- *	drivers discover endpoints through the ep_list of a usb_gadget.
- *
- * When configurations are set, or when interface settings change, the driver
- * will enable or disable the relevant endpoints.  while it is enabled, an
- * endpoint may be used for i/o until the driver receives a disconnect() from
- * the host or until the endpoint is disabled.
- *
- * the ep0 implementation (which calls this routine) must ensure that the
- * hardware capabilities of each endpoint match the descriptor provided
- * for it.  for example, an endpoint named "ep2in-bulk" would be usable
- * for interrupt transfers as well as bulk, but it likely couldn't be used
- * for iso transfers or for endpoint 14.  some endpoints are fully
- * configurable, with more generic names like "ep-a".  (remember that for
- * USB, "in" means "towards the USB master".)
- *
- * returns zero, or a negative error code.
- */
+		unsigned maxpacket_limit)
+{ }
 static inline int usb_ep_enable(struct usb_ep *ep)
-{
-	int ret;
-
-	if (ep->enabled)
-		return 0;
-
-	ret = ep->ops->enable(ep, ep->desc);
-	if (ret)
-		return ret;
-
-	ep->enabled = true;
-
-	return 0;
-}
-
-/**
- * usb_ep_disable - endpoint is no longer usable
- * @ep:the endpoint being unconfigured.  may not be the endpoint named "ep0".
- *
- * no other task may be using this endpoint when this is called.
- * any pending and uncompleted requests will complete with status
- * indicating disconnect (-ESHUTDOWN) before this call returns.
- * gadget drivers must call usb_ep_enable() again before queueing
- * requests to the endpoint.
- *
- * returns zero, or a negative error code.
- */
+{ return 0; }
 static inline int usb_ep_disable(struct usb_ep *ep)
-{
-	int ret;
-
-	if (!ep->enabled)
-		return 0;
-
-	ret = ep->ops->disable(ep);
-	if (ret)
-		return ret;
-
-	ep->enabled = false;
-
-	return 0;
-}
-
-/**
- * usb_ep_alloc_request - allocate a request object to use with this endpoint
- * @ep:the endpoint to be used with with the request
- * @gfp_flags:GFP_* flags to use
- *
- * Request objects must be allocated with this call, since they normally
- * need controller-specific setup and may even need endpoint-specific
- * resources such as allocation of DMA descriptors.
- * Requests may be submitted with usb_ep_queue(), and receive a single
- * completion callback.  Free requests with usb_ep_free_request(), when
- * they are no longer needed.
- *
- * Returns the request, or null if one could not be allocated.
- */
+{ return 0; }
 static inline struct usb_request *usb_ep_alloc_request(struct usb_ep *ep,
-						       gfp_t gfp_flags)
-{
-	return ep->ops->alloc_request(ep, gfp_flags);
-}
-
-/**
- * usb_ep_free_request - frees a request object
- * @ep:the endpoint associated with the request
- * @req:the request being freed
- *
- * Reverses the effect of usb_ep_alloc_request().
- * Caller guarantees the request is not queued, and that it will
- * no longer be requeued (or otherwise used).
- */
+		gfp_t gfp_flags)
+{ return NULL; }
 static inline void usb_ep_free_request(struct usb_ep *ep,
-				       struct usb_request *req)
-{
-	ep->ops->free_request(ep, req);
-}
-
-/**
- * usb_ep_queue - queues (submits) an I/O request to an endpoint.
- * @ep:the endpoint associated with the request
- * @req:the request being submitted
- * @gfp_flags: GFP_* flags to use in case the lower level driver couldn't
- *	pre-allocate all necessary memory with the request.
- *
- * This tells the device controller to perform the specified request through
- * that endpoint (reading or writing a buffer).  When the request completes,
- * including being canceled by usb_ep_dequeue(), the request's completion
- * routine is called to return the request to the driver.  Any endpoint
- * (except control endpoints like ep0) may have more than one transfer
- * request queued; they complete in FIFO order.  Once a gadget driver
- * submits a request, that request may not be examined or modified until it
- * is given back to that driver through the completion callback.
- *
- * Each request is turned into one or more packets.  The controller driver
- * never merges adjacent requests into the same packet.  OUT transfers
- * will sometimes use data that's already buffered in the hardware.
- * Drivers can rely on the fact that the first byte of the request's buffer
- * always corresponds to the first byte of some USB packet, for both
- * IN and OUT transfers.
- *
- * Bulk endpoints can queue any amount of data; the transfer is packetized
- * automatically.  The last packet will be short if the request doesn't fill it
- * out completely.  Zero length packets (ZLPs) should be avoided in portable
- * protocols since not all usb hardware can successfully handle zero length
- * packets.  (ZLPs may be explicitly written, and may be implicitly written if
- * the request 'zero' flag is set.)  Bulk endpoints may also be used
- * for interrupt transfers; but the reverse is not true, and some endpoints
- * won't support every interrupt transfer.  (Such as 768 byte packets.)
- *
- * Interrupt-only endpoints are less functional than bulk endpoints, for
- * example by not supporting queueing or not handling buffers that are
- * larger than the endpoint's maxpacket size.  They may also treat data
- * toggle differently.
- *
- * Control endpoints ... after getting a setup() callback, the driver queues
- * one response (even if it would be zero length).  That enables the
- * status ack, after transferring data as specified in the response.  Setup
- * functions may return negative error codes to generate protocol stalls.
- * (Note that some USB device controllers disallow protocol stall responses
- * in some cases.)  When control responses are deferred (the response is
- * written after the setup callback returns), then usb_ep_set_halt() may be
- * used on ep0 to trigger protocol stalls.  Depending on the controller,
- * it may not be possible to trigger a status-stage protocol stall when the
- * data stage is over, that is, from within the response's completion
- * routine.
- *
- * For periodic endpoints, like interrupt or isochronous ones, the usb host
- * arranges to poll once per interval, and the gadget driver usually will
- * have queued some data to transfer at that time.
- *
- * Returns zero, or a negative error code.  Endpoints that are not enabled
- * report errors; errors will also be
- * reported when the usb peripheral is disconnected.
- */
-static inline int usb_ep_queue(struct usb_ep *ep,
-			       struct usb_request *req, gfp_t gfp_flags)
-{
-	if (WARN_ON_ONCE(!ep->enabled && ep->address))
-		return -ESHUTDOWN;
-
-	return ep->ops->queue(ep, req, gfp_flags);
-}
-
-/**
- * usb_ep_dequeue - dequeues (cancels, unlinks) an I/O request from an endpoint
- * @ep:the endpoint associated with the request
- * @req:the request being canceled
- *
- * If the request is still active on the endpoint, it is dequeued and its
- * completion routine is called (with status -ECONNRESET); else a negative
- * error code is returned. This is guaranteed to happen before the call to
- * usb_ep_dequeue() returns.
- *
- * Note that some hardware can't clear out write fifos (to unlink the request
- * at the head of the queue) except as part of disconnecting from usb. Such
- * restrictions prevent drivers from supporting configuration changes,
- * even to configuration zero (a "chapter 9" requirement).
- */
+		struct usb_request *req)
+{ }
+static inline int usb_ep_queue(struct usb_ep *ep, struct usb_request *req,
+		gfp_t gfp_flags)
+{ return 0; }
 static inline int usb_ep_dequeue(struct usb_ep *ep, struct usb_request *req)
-{
-	return ep->ops->dequeue(ep, req);
-}
-
-/**
- * usb_ep_set_halt - sets the endpoint halt feature.
- * @ep: the non-isochronous endpoint being stalled
- *
- * Use this to stall an endpoint, perhaps as an error report.
- * Except for control endpoints,
- * the endpoint stays halted (will not stream any data) until the host
- * clears this feature; drivers may need to empty the endpoint's request
- * queue first, to make sure no inappropriate transfers happen.
- *
- * Note that while an endpoint CLEAR_FEATURE will be invisible to the
- * gadget driver, a SET_INTERFACE will not be.  To reset endpoints for the
- * current altsetting, see usb_ep_clear_halt().  When switching altsettings,
- * it's simplest to use usb_ep_enable() or usb_ep_disable() for the endpoints.
- *
- * Returns zero, or a negative error code.  On success, this call sets
- * underlying hardware state that blocks data transfers.
- * Attempts to halt IN endpoints will fail (returning -EAGAIN) if any
- * transfer requests are still queued, or if the controller hardware
- * (usually a FIFO) still holds bytes that the host hasn't collected.
- */
+{ return 0; }
 static inline int usb_ep_set_halt(struct usb_ep *ep)
-{
-	return ep->ops->set_halt(ep, 1);
-}
-
-/**
- * usb_ep_clear_halt - clears endpoint halt, and resets toggle
- * @ep:the bulk or interrupt endpoint being reset
- *
- * Use this when responding to the standard usb "set interface" request,
- * for endpoints that aren't reconfigured, after clearing any other state
- * in the endpoint's i/o queue.
- *
- * Returns zero, or a negative error code.  On success, this call clears
- * the underlying hardware state reflecting endpoint halt and data toggle.
- * Note that some hardware can't support this request (like pxa2xx_udc),
- * and accordingly can't correctly implement interface altsettings.
- */
+{ return 0; }
 static inline int usb_ep_clear_halt(struct usb_ep *ep)
-{
-	return ep->ops->set_halt(ep, 0);
-}
-
-/**
- * usb_ep_set_wedge - sets the halt feature and ignores clear requests
- * @ep: the endpoint being wedged
- *
- * Use this to stall an endpoint and ignore CLEAR_FEATURE(HALT_ENDPOINT)
- * requests. If the gadget driver clears the halt status, it will
- * automatically unwedge the endpoint.
- *
- * Returns zero on success, else negative errno.
- */
-static inline int
-usb_ep_set_wedge(struct usb_ep *ep)
-{
-	if (ep->ops->set_wedge)
-		return ep->ops->set_wedge(ep);
-	else
-		return ep->ops->set_halt(ep, 1);
-}
-
-/**
- * usb_ep_fifo_status - returns number of bytes in fifo, or error
- * @ep: the endpoint whose fifo status is being checked.
- *
- * FIFO endpoints may have "unclaimed data" in them in certain cases,
- * such as after aborted transfers.  Hosts may not have collected all
- * the IN data written by the gadget driver (and reported by a request
- * completion).  The gadget driver may not have collected all the data
- * written OUT to it by the host.  Drivers that need precise handling for
- * fault reporting or recovery may need to use this call.
- *
- * This returns the number of such bytes in the fifo, or a negative
- * errno if the endpoint doesn't use a FIFO or doesn't support such
- * precise handling.
- */
+{ return 0; }
+static inline int usb_ep_set_wedge(struct usb_ep *ep)
+{ return 0; }
 static inline int usb_ep_fifo_status(struct usb_ep *ep)
-{
-	if (ep->ops->fifo_status)
-		return ep->ops->fifo_status(ep);
-	else
-		return -EOPNOTSUPP;
-}
-
-/**
- * usb_ep_fifo_flush - flushes contents of a fifo
- * @ep: the endpoint whose fifo is being flushed.
- *
- * This call may be used to flush the "unclaimed data" that may exist in
- * an endpoint fifo after abnormal transaction terminations.  The call
- * must never be used except when endpoint is not being used for any
- * protocol translation.
- */
+{ return 0; }
 static inline void usb_ep_fifo_flush(struct usb_ep *ep)
-{
-	if (ep->ops->fifo_flush)
-		ep->ops->fifo_flush(ep);
-}
-
+{ }
+#endif /* USB_GADGET */
 
 /*-------------------------------------------------------------------------*/
 
@@ -582,6 +326,7 @@
  * @dev: Driver model state for this abstract device.
  * @out_epnum: last used out ep number
  * @in_epnum: last used in ep number
+ * @mA: last set mA value
  * @otg_caps: OTG capabilities of this gadget.
  * @sg_supported: true if we can handle scatter-gather
  * @is_otg: True if the USB device port uses a Mini-AB jack, so that the
@@ -638,6 +383,7 @@
 	struct device			dev;
 	unsigned			out_epnum;
 	unsigned			in_epnum;
+	unsigned			mA;
 	struct usb_otg_caps		*otg_caps;
 
 	unsigned			sg_supported:1;
@@ -760,251 +506,44 @@
 #endif
 }
 
-/**
- * usb_gadget_frame_number - returns the current frame number
- * @gadget: controller that reports the frame number
- *
- * Returns the usb frame number, normally eleven bits from a SOF packet,
- * or negative errno if this device doesn't support this capability.
- */
+/*-------------------------------------------------------------------------*/
+
+#if IS_ENABLED(CONFIG_USB_GADGET)
+int usb_gadget_frame_number(struct usb_gadget *gadget);
+int usb_gadget_wakeup(struct usb_gadget *gadget);
+int usb_gadget_set_selfpowered(struct usb_gadget *gadget);
+int usb_gadget_clear_selfpowered(struct usb_gadget *gadget);
+int usb_gadget_vbus_connect(struct usb_gadget *gadget);
+int usb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA);
+int usb_gadget_vbus_disconnect(struct usb_gadget *gadget);
+int usb_gadget_connect(struct usb_gadget *gadget);
+int usb_gadget_disconnect(struct usb_gadget *gadget);
+int usb_gadget_deactivate(struct usb_gadget *gadget);
+int usb_gadget_activate(struct usb_gadget *gadget);
+#else
 static inline int usb_gadget_frame_number(struct usb_gadget *gadget)
-{
-	return gadget->ops->get_frame(gadget);
-}
-
-/**
- * usb_gadget_wakeup - tries to wake up the host connected to this gadget
- * @gadget: controller used to wake up the host
- *
- * Returns zero on success, else negative error code if the hardware
- * doesn't support such attempts, or its support has not been enabled
- * by the usb host.  Drivers must return device descriptors that report
- * their ability to support this, or hosts won't enable it.
- *
- * This may also try to use SRP to wake the host and start enumeration,
- * even if OTG isn't otherwise in use.  OTG devices may also start
- * remote wakeup even when hosts don't explicitly enable it.
- */
+{ return 0; }
 static inline int usb_gadget_wakeup(struct usb_gadget *gadget)
-{
-	if (!gadget->ops->wakeup)
-		return -EOPNOTSUPP;
-	return gadget->ops->wakeup(gadget);
-}
-
-/**
- * usb_gadget_set_selfpowered - sets the device selfpowered feature.
- * @gadget:the device being declared as self-powered
- *
- * this affects the device status reported by the hardware driver
- * to reflect that it now has a local power supply.
- *
- * returns zero on success, else negative errno.
- */
+{ return 0; }
 static inline int usb_gadget_set_selfpowered(struct usb_gadget *gadget)
-{
-	if (!gadget->ops->set_selfpowered)
-		return -EOPNOTSUPP;
-	return gadget->ops->set_selfpowered(gadget, 1);
-}
-
-/**
- * usb_gadget_clear_selfpowered - clear the device selfpowered feature.
- * @gadget:the device being declared as bus-powered
- *
- * this affects the device status reported by the hardware driver.
- * some hardware may not support bus-powered operation, in which
- * case this feature's value can never change.
- *
- * returns zero on success, else negative errno.
- */
+{ return 0; }
 static inline int usb_gadget_clear_selfpowered(struct usb_gadget *gadget)
-{
-	if (!gadget->ops->set_selfpowered)
-		return -EOPNOTSUPP;
-	return gadget->ops->set_selfpowered(gadget, 0);
-}
-
-/**
- * usb_gadget_vbus_connect - Notify controller that VBUS is powered
- * @gadget:The device which now has VBUS power.
- * Context: can sleep
- *
- * This call is used by a driver for an external transceiver (or GPIO)
- * that detects a VBUS power session starting.  Common responses include
- * resuming the controller, activating the D+ (or D-) pullup to let the
- * host detect that a USB device is attached, and starting to draw power
- * (8mA or possibly more, especially after SET_CONFIGURATION).
- *
- * Returns zero on success, else negative errno.
- */
+{ return 0; }
 static inline int usb_gadget_vbus_connect(struct usb_gadget *gadget)
-{
-	if (!gadget->ops->vbus_session)
-		return -EOPNOTSUPP;
-	return gadget->ops->vbus_session(gadget, 1);
-}
-
-/**
- * usb_gadget_vbus_draw - constrain controller's VBUS power usage
- * @gadget:The device whose VBUS usage is being described
- * @mA:How much current to draw, in milliAmperes.  This should be twice
- *	the value listed in the configuration descriptor bMaxPower field.
- *
- * This call is used by gadget drivers during SET_CONFIGURATION calls,
- * reporting how much power the device may consume.  For example, this
- * could affect how quickly batteries are recharged.
- *
- * Returns zero on success, else negative errno.
- */
+{ return 0; }
 static inline int usb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA)
-{
-	if (!gadget->ops->vbus_draw)
-		return -EOPNOTSUPP;
-	return gadget->ops->vbus_draw(gadget, mA);
-}
-
-/**
- * usb_gadget_vbus_disconnect - notify controller about VBUS session end
- * @gadget:the device whose VBUS supply is being described
- * Context: can sleep
- *
- * This call is used by a driver for an external transceiver (or GPIO)
- * that detects a VBUS power session ending.  Common responses include
- * reversing everything done in usb_gadget_vbus_connect().
- *
- * Returns zero on success, else negative errno.
- */
+{ return 0; }
 static inline int usb_gadget_vbus_disconnect(struct usb_gadget *gadget)
-{
-	if (!gadget->ops->vbus_session)
-		return -EOPNOTSUPP;
-	return gadget->ops->vbus_session(gadget, 0);
-}
-
-/**
- * usb_gadget_connect - software-controlled connect to USB host
- * @gadget:the peripheral being connected
- *
- * Enables the D+ (or potentially D-) pullup.  The host will start
- * enumerating this gadget when the pullup is active and a VBUS session
- * is active (the link is powered).  This pullup is always enabled unless
- * usb_gadget_disconnect() has been used to disable it.
- *
- * Returns zero on success, else negative errno.
- */
+{ return 0; }
 static inline int usb_gadget_connect(struct usb_gadget *gadget)
-{
-	int ret;
-
-	if (!gadget->ops->pullup)
-		return -EOPNOTSUPP;
-
-	if (gadget->deactivated) {
-		/*
-		 * If gadget is deactivated we only save new state.
-		 * Gadget will be connected automatically after activation.
-		 */
-		gadget->connected = true;
-		return 0;
-	}
-
-	ret = gadget->ops->pullup(gadget, 1);
-	if (!ret)
-		gadget->connected = 1;
-	return ret;
-}
-
-/**
- * usb_gadget_disconnect - software-controlled disconnect from USB host
- * @gadget:the peripheral being disconnected
- *
- * Disables the D+ (or potentially D-) pullup, which the host may see
- * as a disconnect (when a VBUS session is active).  Not all systems
- * support software pullup controls.
- *
- * Returns zero on success, else negative errno.
- */
+{ return 0; }
 static inline int usb_gadget_disconnect(struct usb_gadget *gadget)
-{
-	int ret;
-
-	if (!gadget->ops->pullup)
-		return -EOPNOTSUPP;
-
-	if (gadget->deactivated) {
-		/*
-		 * If gadget is deactivated we only save new state.
-		 * Gadget will stay disconnected after activation.
-		 */
-		gadget->connected = false;
-		return 0;
-	}
-
-	ret = gadget->ops->pullup(gadget, 0);
-	if (!ret)
-		gadget->connected = 0;
-	return ret;
-}
-
-/**
- * usb_gadget_deactivate - deactivate function which is not ready to work
- * @gadget: the peripheral being deactivated
- *
- * This routine may be used during the gadget driver bind() call to prevent
- * the peripheral from ever being visible to the USB host, unless later
- * usb_gadget_activate() is called.  For example, user mode components may
- * need to be activated before the system can talk to hosts.
- *
- * Returns zero on success, else negative errno.
- */
+{ return 0; }
 static inline int usb_gadget_deactivate(struct usb_gadget *gadget)
-{
-	int ret;
-
-	if (gadget->deactivated)
-		return 0;
-
-	if (gadget->connected) {
-		ret = usb_gadget_disconnect(gadget);
-		if (ret)
-			return ret;
-		/*
-		 * If gadget was being connected before deactivation, we want
-		 * to reconnect it in usb_gadget_activate().
-		 */
-		gadget->connected = true;
-	}
-	gadget->deactivated = true;
-
-	return 0;
-}
-
-/**
- * usb_gadget_activate - activate function which is not ready to work
- * @gadget: the peripheral being activated
- *
- * This routine activates gadget which was previously deactivated with
- * usb_gadget_deactivate() call. It calls usb_gadget_connect() if needed.
- *
- * Returns zero on success, else negative errno.
- */
+{ return 0; }
 static inline int usb_gadget_activate(struct usb_gadget *gadget)
-{
-	if (!gadget->deactivated)
-		return 0;
-
-	gadget->deactivated = false;
-
-	/*
-	 * If gadget has been connected before deactivation, or became connected
-	 * while it was being deactivated, we call usb_gadget_connect().
-	 */
-	if (gadget->connected)
-		return usb_gadget_connect(gadget);
-
-	return 0;
-}
+{ return 0; }
+#endif /* CONFIG_USB_GADGET */
 
 /*-------------------------------------------------------------------------*/
 
diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h
deleted file mode 100644
index 8c8f685..0000000
--- a/include/linux/usb/msm_hsusb.h
+++ /dev/null
@@ -1,200 +0,0 @@
-/* linux/include/asm-arm/arch-msm/hsusb.h
- *
- * Copyright (C) 2008 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- * Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_HSUSB_H
-#define __ASM_ARCH_MSM_HSUSB_H
-
-#include <linux/extcon.h>
-#include <linux/types.h>
-#include <linux/usb/otg.h>
-#include <linux/clk.h>
-
-/**
- * OTG control
- *
- * OTG_NO_CONTROL	Id/VBUS notifications not required. Useful in host
- *                      only configuration.
- * OTG_PHY_CONTROL	Id/VBUS notifications comes form USB PHY.
- * OTG_PMIC_CONTROL	Id/VBUS notifications comes from PMIC hardware.
- * OTG_USER_CONTROL	Id/VBUS notifcations comes from User via sysfs.
- *
- */
-enum otg_control_type {
-	OTG_NO_CONTROL = 0,
-	OTG_PHY_CONTROL,
-	OTG_PMIC_CONTROL,
-	OTG_USER_CONTROL,
-};
-
-/**
- * PHY used in
- *
- * INVALID_PHY			Unsupported PHY
- * CI_45NM_INTEGRATED_PHY	Chipidea 45nm integrated PHY
- * SNPS_28NM_INTEGRATED_PHY	Synopsis 28nm integrated PHY
- *
- */
-enum msm_usb_phy_type {
-	INVALID_PHY = 0,
-	CI_45NM_INTEGRATED_PHY,
-	SNPS_28NM_INTEGRATED_PHY,
-};
-
-#define IDEV_CHG_MAX	1500
-#define IUNIT		100
-
-/**
- * Different states involved in USB charger detection.
- *
- * USB_CHG_STATE_UNDEFINED	USB charger is not connected or detection
- *                              process is not yet started.
- * USB_CHG_STATE_WAIT_FOR_DCD	Waiting for Data pins contact.
- * USB_CHG_STATE_DCD_DONE	Data pin contact is detected.
- * USB_CHG_STATE_PRIMARY_DONE	Primary detection is completed (Detects
- *                              between SDP and DCP/CDP).
- * USB_CHG_STATE_SECONDARY_DONE	Secondary detection is completed (Detects
- *                              between DCP and CDP).
- * USB_CHG_STATE_DETECTED	USB charger type is determined.
- *
- */
-enum usb_chg_state {
-	USB_CHG_STATE_UNDEFINED = 0,
-	USB_CHG_STATE_WAIT_FOR_DCD,
-	USB_CHG_STATE_DCD_DONE,
-	USB_CHG_STATE_PRIMARY_DONE,
-	USB_CHG_STATE_SECONDARY_DONE,
-	USB_CHG_STATE_DETECTED,
-};
-
-/**
- * USB charger types
- *
- * USB_INVALID_CHARGER	Invalid USB charger.
- * USB_SDP_CHARGER	Standard downstream port. Refers to a downstream port
- *                      on USB2.0 compliant host/hub.
- * USB_DCP_CHARGER	Dedicated charger port (AC charger/ Wall charger).
- * USB_CDP_CHARGER	Charging downstream port. Enumeration can happen and
- *                      IDEV_CHG_MAX can be drawn irrespective of USB state.
- *
- */
-enum usb_chg_type {
-	USB_INVALID_CHARGER = 0,
-	USB_SDP_CHARGER,
-	USB_DCP_CHARGER,
-	USB_CDP_CHARGER,
-};
-
-/**
- * struct msm_otg_platform_data - platform device data
- *              for msm_otg driver.
- * @phy_init_seq: PHY configuration sequence values. Value of -1 is reserved as
- *              "do not overwrite default vaule at this address".
- * @phy_init_sz: PHY configuration sequence size.
- * @vbus_power: VBUS power on/off routine.
- * @power_budget: VBUS power budget in mA (0 will be treated as 500mA).
- * @mode: Supported mode (OTG/peripheral/host).
- * @otg_control: OTG switch controlled by user/Id pin
- */
-struct msm_otg_platform_data {
-	int *phy_init_seq;
-	int phy_init_sz;
-	void (*vbus_power)(bool on);
-	unsigned power_budget;
-	enum usb_dr_mode mode;
-	enum otg_control_type otg_control;
-	enum msm_usb_phy_type phy_type;
-	void (*setup_gpio)(enum usb_otg_state state);
-};
-
-/**
- * struct msm_usb_cable - structure for exteternal connector cable
- *			  state tracking
- * @nb: hold event notification callback
- * @conn: used for notification registration
- */
-struct msm_usb_cable {
-	struct notifier_block		nb;
-	struct extcon_dev		*extcon;
-};
-
-/**
- * struct msm_otg: OTG driver data. Shared by HCD and DCD.
- * @otg: USB OTG Transceiver structure.
- * @pdata: otg device platform data.
- * @irq: IRQ number assigned for HSUSB controller.
- * @clk: clock struct of usb_hs_clk.
- * @pclk: clock struct of usb_hs_pclk.
- * @core_clk: clock struct of usb_hs_core_clk.
- * @regs: ioremapped register base address.
- * @inputs: OTG state machine inputs(Id, SessValid etc).
- * @sm_work: OTG state machine work.
- * @in_lpm: indicates low power mode (LPM) state.
- * @async_int: Async interrupt arrived.
- * @cur_power: The amount of mA available from downstream port.
- * @chg_work: Charger detection work.
- * @chg_state: The state of charger detection process.
- * @chg_type: The type of charger attached.
- * @dcd_retires: The retry count used to track Data contact
- *               detection process.
- * @manual_pullup: true if VBUS is not routed to USB controller/phy
- *	and controller driver therefore enables pull-up explicitly before
- *	starting controller using usbcmd run/stop bit.
- * @vbus: VBUS signal state trakining, using extcon framework
- * @id: ID signal state trakining, using extcon framework
- * @switch_gpio: Descriptor for GPIO used to control external Dual
- *               SPDT USB Switch.
- * @reboot: Used to inform the driver to route USB D+/D- line to Device
- *	    connector
- */
-struct msm_otg {
-	struct usb_phy phy;
-	struct msm_otg_platform_data *pdata;
-	int irq;
-	struct clk *clk;
-	struct clk *pclk;
-	struct clk *core_clk;
-	void __iomem *regs;
-#define ID		0
-#define B_SESS_VLD	1
-	unsigned long inputs;
-	struct work_struct sm_work;
-	atomic_t in_lpm;
-	int async_int;
-	unsigned cur_power;
-	int phy_number;
-	struct delayed_work chg_work;
-	enum usb_chg_state chg_state;
-	enum usb_chg_type chg_type;
-	u8 dcd_retries;
-	struct regulator *v3p3;
-	struct regulator *v1p8;
-	struct regulator *vddcx;
-
-	struct reset_control *phy_rst;
-	struct reset_control *link_rst;
-	int vdd_levels[3];
-
-	bool manual_pullup;
-
-	struct msm_usb_cable vbus;
-	struct msm_usb_cable id;
-
-	struct gpio_desc *switch_gpio;
-	struct notifier_block reboot;
-};
-
-#endif
diff --git a/include/linux/usb/of.h b/include/linux/usb/of.h
index de3237f..5ff9032 100644
--- a/include/linux/usb/of.h
+++ b/include/linux/usb/of.h
@@ -12,7 +12,7 @@
 #include <linux/usb/phy.h>
 
 #if IS_ENABLED(CONFIG_OF)
-enum usb_dr_mode of_usb_get_dr_mode_by_phy(struct device_node *phy_np);
+enum usb_dr_mode of_usb_get_dr_mode_by_phy(struct device_node *np, int arg0);
 bool of_usb_host_tpl_support(struct device_node *np);
 int of_usb_update_otg_caps(struct device_node *np,
 			struct usb_otg_caps *otg_caps);
@@ -20,7 +20,7 @@
 			int portnum);
 #else
 static inline enum usb_dr_mode
-of_usb_get_dr_mode_by_phy(struct device_node *phy_np)
+of_usb_get_dr_mode_by_phy(struct device_node *np, int arg0)
 {
 	return USB_DR_MODE_UNKNOWN;
 }
diff --git a/include/linux/usb/xhci_pdriver.h b/include/linux/usb/xhci_pdriver.h
deleted file mode 100644
index 376654b..0000000
--- a/include/linux/usb/xhci_pdriver.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- */
-
-#ifndef __USB_CORE_XHCI_PDRIVER_H
-#define __USB_CORE_XHCI_PDRIVER_H
-
-/**
- * struct usb_xhci_pdata - platform_data for generic xhci platform driver
- *
- * @usb3_lpm_capable:	determines if this xhci platform supports USB3
- *			LPM capability
- *
- */
-struct usb_xhci_pdata {
-	unsigned	usb3_lpm_capable:1;
-};
-
-#endif /* __USB_CORE_XHCI_PDRIVER_H */