Renesas ARM64 Based SoC DT Updates for v4.16
* Use r8a77970 (V3M) CPG core clock and SYSC power domain macros
These may be used in place of numeric constants now that they
are present in Linus's tree.
* Add r8a77970 (V3M) Starter Kit board support
This includes basic support to bring up the board with a serial
console and EtherAVB support
* Add IPMMU nodes and connections to on-chip devices
on r8a7795 (H3), r8a7796 (M3-W), r8a77970 (V3M) and r8a77995 (D3) SoCs
Simon Horman says "With these patches applied a white list enabled IPMMU
driver may be used to check silicon revision and then enable IPMMU in the
known working cases."
* Enable DMA for SCIF2 on r8a77995 (D2) SoC
* Increase the number of GPIO bank 1 ports to 29 on r8a7795 (H3) SoC
This adds support for the GP-1-28 port pin of the r8a7795 (H3) ES2.0 SoC
* Add support for CAN to r8a77995 (D3) SoC
Ulrich Hecht says "This is a by-the-datasheet implementation, with the
datasheet missing some bits, namely the pin map. I filled in the gaps...
by deducing the information from pin numbers already in the PFC driver,
so careful scrutiny is advised."
* Add support for SDHI to r8a77995 (D3) SoC
* Add SoC name to file header of r8a7795 (H3) and r8a7796 (M3-W)
Salvator-X and Salvator-XS board files
Geert Uytterhoeven says "With the proliferation of Salvator-X and
Salvator-XS boards carrying different R-Car Gen3 SoCs variants, several
DTS files ended up having the same file headers.
Add the SoC names to the file headers to avoid confusion."
* Add device note for ROHM BD9571MWV PMIC to
r8a7795 (H3) and r8a7796 (M3-W) Salvator-X and Salvator-XS boards.
Geert Uytterhoeven says "This was based on the example in the DT binding
documentation, but using IRQ0 instead of a GPIO interrupt, as that
matches the schematics, and because INTC-EX is a simpler block."
* Enable USB2.0 channel 0 on r8a77970 (V3M) ULCB Kingfisher board
Vladimir Barinov says "The dedicated USB0_PWEN pin is used to control
CN13 VBUS source from U43 power supply. MAX3355 can also provide VBUS,
hence it should be disabled via OTG_OFFVBUSn node coming from gpio
expander TCA9539. Set MAX3355 enabled using OTG_EXTLPn node to be able
to read OTG ID of CN13."
* Add support for r8a7795 (M3-W) Salvator-XS board
Geert Uytterhoeven says "This patch series adds support for the version
of the Salvator-XS development board equipped with an R-Car M3-W SiP.
The DT was based on work for the Salvator-X and -XS boards with M3-W
resp. H3 SiPs."
* Add watchdog timer support to r8a77970 (V3M) eagle board
Geert Uytterhoven says "This allows to use the watchdog timer to reset
the board, until PSCI is enhanced to include such functionality."
* Use Use R-Car SDHI Gen3 fallback on r8a7795 (H3) and r8a7796 (M3-W) SoCs
* Set driver type for MMC on r8a7795 (H3) and r8a7796 (M3-W) Salvator-X and
Salvator-XS boards.
Wolfram Sang says "These boards are known to have eMMC issues with the
default driver type. Specify a working one."
arm64: dts: renesas: r8a77970: use SYSC power domain macros
Now that the commit 833bdb47c826 ("dt-bindings: power: add R8A77970 SYSC
power domain definitions") has hit Linus' tree, we can replace the bare
numbers (we had to use to avoid a cross tree dependency) with these macro
definitions...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
1 file changed
